http://www.instructables.com Wed, 19 Jun 2013 17:08:41 PDT BLOX v1.01 http://www.instructables.com/id/Bicycle-Pizza-Carrier-built-from-scrap-materials/
Bicycle Pizza Carrier built from scrap materials - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGW/4K6K/HGH70HMU/FGW4K6KHGH70HMU.SQUARE2.jpg http://www.instructables.com/files/deriv/FGW/4K6K/HGH70HMU/FGW4K6KHGH70HMU.SQUARE.jpg http://www.instructables.com/files/deriv/FGW/4K6K/HGH70HMU/FGW4K6KHGH70HMU.SMALL.jpg ajax_electronics I love bicycles and I love pizza.  So, what could be better than using my bike to pick up a pizza!*  That is the inspiration behind this instructable - a Bicycle mounted pizza carrier.  Unfortunately it will be difficult to exactly duplicate my build (more on that later), but hopefully this instru...
By: ajax_electronics

Continue Reading »]]> Mon, 13 May 2013 20:33:57 PDT http://www.instructables.com/id/TubeFob-Handy-Bicycle-Inner-Tube-Luggage-Tie/
TubeFob: Handy Bicycle Inner Tube Luggage Tie - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FRU/3G2X/HGH6Q7FT/FRU3G2XHGH6Q7FT.SQUARE2.jpg http://www.instructables.com/files/deriv/FRU/3G2X/HGH6Q7FT/FRU3G2XHGH6Q7FT.SQUARE.jpg http://www.instructables.com/files/deriv/FRU/3G2X/HGH6Q7FT/FRU3G2XHGH6Q7FT.SMALL.jpg JohanJShaw TubeFob: Handy Bicycle Inner Tube Luggage Tie This is how I carry a strip of inner tube that can be used to tie down groceries etc. to the luggage rack of my bike. As fellow makers will appreciate, this stuff has many other uses. Why not add inner tube to your Every Day Carry alongside paracord and...
By: JohanJShaw

Continue Reading »]]> Sun, 12 May 2013 06:39:43 PDT http://www.instructables.com/id/Bicycle-Trailer-Hitch-to-Luggage-Rack/
Bicycle Trailer Hitch (to Luggage Rack) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FOM/INBN/HGH6Q28V/FOMINBNHGH6Q28V.SQUARE2.jpg http://www.instructables.com/files/deriv/FOM/INBN/HGH6Q28V/FOMINBNHGH6Q28V.SQUARE.jpg http://www.instructables.com/files/deriv/FOM/INBN/HGH6Q28V/FOMINBNHGH6Q28V.SMALL.jpg JohanJShaw Here is how I made a strong and permanent hitch for my bike trailer. The trailer is a Bellelli Eco Trailer Maxi which I modified (with a little woodworking) to a luggage rack level hitch. Why? The original seat post hitch did not adjust high enough to ride level - and I hate seat post hitches, as t...
By: JohanJShaw

Continue Reading »]]> Sat, 11 May 2013 11:09:40 PDT http://www.instructables.com/id/Toolbox-Compatible-Bike-Valet-With-Fork-Mounts-For/
Toolbox Compatible Bike Valet With Fork Mounts For Pickup Trucks - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFD/3EX9/HFSH77YB/FFD3EX9HFSH77YB.SQUARE2.jpg http://www.instructables.com/files/deriv/FFD/3EX9/HFSH77YB/FFD3EX9HFSH77YB.SQUARE.jpg http://www.instructables.com/files/deriv/FFD/3EX9/HFSH77YB/FFD3EX9HFSH77YB.SMALL.jpg Nick_momo396 Do you ever wonder how you could fit your bike into your truck without a hassle? Do you have a toolbox and/or a shortbed pickup truck and have no way to transport your bike other than those pesky bungee cords? Look no further, because with my new design, I will revolutionize the way you transport yo...
By: Nick_momo396

Continue Reading »]]> Sat, 27 Apr 2013 09:49:50 PDT http://www.instructables.com/id/DIY-Bike-Wall-Mount-from-your-Iron-Gym/ http://www.instructables.com/files/deriv/FS3/54ZH/HEBNA373/FS354ZHHEBNA373.SQUARE2.jpg http://www.instructables.com/files/deriv/FS3/54ZH/HEBNA373/FS354ZHHEBNA373.SQUARE.jpg http://www.instructables.com/files/deriv/FS3/54ZH/HEBNA373/FS354ZHHEBNA373.SMALL.jpg Tim.Taylor I found a great use for my Iron Gym that I wasn't using anymore since I could not put it up on any door post  in my new house. It's perfect as a wall mount for my fixie :) 1. Turn the black plastic bar around to the other side of the metal bars (this normally sits on the opposite site of the door) ...
By: Tim.Taylor

Continue Reading »]]> Sat, 16 Mar 2013 10:10:53 PDT http://www.instructables.com/id/Wall-mounted-horizontal-wood-rack/
Wall-mounted horizontal wood rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FLQ/YA6K/HAOPV2QR/FLQYA6KHAOPV2QR.SQUARE2.jpg http://www.instructables.com/files/deriv/FLQ/YA6K/HAOPV2QR/FLQYA6KHAOPV2QR.SQUARE.jpg http://www.instructables.com/files/deriv/FLQ/YA6K/HAOPV2QR/FLQYA6KHAOPV2QR.SMALL.jpg APblackcat This is my first Instructable so bear with me. I have been searching an easy and cheap way to mount my bike to the wall, and even though I saw some cool ideas here, none of them fit well the area I wanted my bike to be, so as we all do, I made my own. Tools: Handsaw, jigsaw or circular saw Electri...
By: APblackcat

Continue Reading »]]> Sat, 15 Dec 2012 12:31:01 PST http://www.instructables.com/id/Verticle-Bike-Rack-from-2x4s-single-bike/
Vertical Bike Rack from 2x4s (single bike) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FT3/2RTF/H2WEXEET/FT32RTFH2WEXEET.SQUARE2.jpg http://www.instructables.com/files/deriv/FT3/2RTF/H2WEXEET/FT32RTFH2WEXEET.SQUARE.jpg http://www.instructables.com/files/deriv/FT3/2RTF/H2WEXEET/FT32RTFH2WEXEET.SMALL.jpg mythicalbyrd I built a wooden freestanding bike rack for a single bike based off my dual-bike design.  I had some scrap 2x4s. but I needed to purchase a few new 2x4s for this rack.  The bike hook is hung at 63.5", which is perfect for one of my bikes. Lengths to cut 2x4s: 1 - 65" 2 - 61 3/4" 2 - 36" 2 - 28.5" 1...
By: mythicalbyrd

Continue Reading »]]> Sun, 10 Jun 2012 22:32:57 PDT http://www.instructables.com/id/Vertical-Bike-Rack-from-2x4s/
Vertical Bike Rack from 2x4s - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4Z/BRRR/H2ULR9TG/F4ZBRRRH2ULR9TG.SQUARE2.jpg http://www.instructables.com/files/deriv/F4Z/BRRR/H2ULR9TG/F4ZBRRRH2ULR9TG.SQUARE.jpg http://www.instructables.com/files/deriv/F4Z/BRRR/H2ULR9TG/F4ZBRRRH2ULR9TG.SMALL.jpg mythicalbyrd I recently built a vertical bike rack from scraps of 2x4s leftover from another project.  I built this rack so that the rear wheel from one of our bikes could rest on the floor.  I found that I would need this bike to be hung at 63.5" using these hooks, but the wheelbase on this bike is larger than ...
By: mythicalbyrd

Continue Reading »]]> Thu, 31 May 2012 11:47:22 PDT http://www.instructables.com/id/Hakima-Roof-Rack-Poor-Mans-Strut-Channel-Cross-/
Hakima Roof Rack - Poor Man's Strut Channel Cross Bars - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FL2/FL7U/GZKG37YJ/FL2FL7UGZKG37YJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FL2/FL7U/GZKG37YJ/FL2FL7UGZKG37YJ.SQUARE.jpg http://www.instructables.com/files/deriv/FL2/FL7U/GZKG37YJ/FL2FL7UGZKG37YJ.SMALL.jpg alhazen My SUV came with a basic luggage rack.  What I really needed was something with the functionality of a Yakima or Thule cross bar but with a dumpster diver price tag. For less than the cost of a single store-bought cross bar I was able to bodge a reasonably functional bar using strut channel that I p...
By: alhazen

Continue Reading »]]> Sat, 12 May 2012 16:42:07 PDT http://www.instructables.com/id/The-Train-Horn-Bicycle/
Extremely Loud Train Horn Bicycle - More DIY How To Projects]]> http://cdn.instructables.com/FM1/L921/H0FLJ31C/FM1L921H0FLJ31C.SQUARE2.jpg http://cdn.instructables.com/FM1/L921/H0FLJ31C/FM1L921H0FLJ31C.SQUARE.jpg http://cdn.instructables.com/FM1/L921/H0FLJ31C/FM1L921H0FLJ31C.SMALL.jpg TheChadster   So you want to be loud? You want to make a statement? You want to scare the crap out people? A train horn will do the trick. Do you want to stand out in the process? Than a bike with a train horn attached will defiantly do the trick!  So you may be aski...
By: TheChadster

Continue Reading »]]> Sun, 1 Apr 2012 22:49:04 PDT http://www.instructables.com/id/In-Home-Bike-Rack/
In-Home Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FCK/IMOX/H0C6MFMV/FCKIMOXH0C6MFMV.SQUARE2.jpg http://www.instructables.com/files/deriv/FCK/IMOX/H0C6MFMV/FCKIMOXH0C6MFMV.SQUARE.jpg http://www.instructables.com/files/deriv/FCK/IMOX/H0C6MFMV/FCKIMOXH0C6MFMV.SMALL.jpg bikeaccessories This guide will show you how to build an inexpensive bicycle rack out of PVC pipe that can hold 2 bikes inside your residence.  It could also be placed in a garage if you would like. These instructions are broken down as follows: 1. Parts Needed 2. How to build the rack 3. Other tips and tricks M...
By: bikeaccessories

Continue Reading »]]> Wed, 28 Mar 2012 18:20:41 PDT http://www.instructables.com/id/Tow-Hitch-Bike-Rack/
Tow Hitch Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F7C/9T6Y/H05NOUZ1/F7C9T6YH05NOUZ1.SQUARE2.jpg http://www.instructables.com/files/deriv/F7C/9T6Y/H05NOUZ1/F7C9T6YH05NOUZ1.SQUARE.jpg http://www.instructables.com/files/deriv/F7C/9T6Y/H05NOUZ1/F7C9T6YH05NOUZ1.SMALL.jpg ddyancey I made this bike rack in order to carry our bikes and to prevent soiling the interior with chain oil.  Now I don't have break our bikes down in order to prepare them for transport.  I made it at Techshop San Jose (http:\\www.techshop.ws). Cut 1 1/4" mild steel tubing and angle iron De-bur and ...
By: ddyancey

Continue Reading »]]> Sat, 24 Mar 2012 17:42:02 PDT http://www.instructables.com/id/Steel-and-Wood-Bicycle-Cargo-Rack/
Steel and Wood Bicycle Cargo Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F94/BEEQ/GP7IHTBJ/F94BEEQGP7IHTBJ.SQUARE2.jpg http://www.instructables.com/files/deriv/F94/BEEQ/GP7IHTBJ/F94BEEQGP7IHTBJ.SQUARE.jpg http://www.instructables.com/files/deriv/F94/BEEQ/GP7IHTBJ/F94BEEQGP7IHTBJ.SMALL.jpg jrh065      I've recently started riding my bike more often. Driving to campus is becoming impractical, and finding parking is increasingly frustrating since the school decided to build new facilities over some of the parking lots. Riding a bike certainly has its advantages, but bikes don't normally have a...
By: jrh065

Continue Reading »]]> Sun, 10 Jul 2011 18:11:28 PDT http://www.instructables.com/id/Backpack-Pannier-for-Bicycle/
Backpack Pannier for Bicycle - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGN/TTRO/GPBDIGVJ/FGNTTROGPBDIGVJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FGN/TTRO/GPBDIGVJ/FGNTTROGPBDIGVJ.SQUARE.jpg http://www.instructables.com/files/deriv/FGN/TTRO/GPBDIGVJ/FGNTTROGPBDIGVJ.SMALL.jpg mech.asn I have been trying to make my own pannier for some time now but wanted to avoid modifying my backpack and especially sewing. This instructable is what i came up with based on ideas I found elsewhere and here: Backpack-panniers-that-are-still-backpacks Parts : - Backpack - Over Door Hanger - Bungee ...
By: mech.asn

Continue Reading »]]> Sun, 3 Jul 2011 17:11:43 PDT http://www.instructables.com/id/homemade-bicycle-rack/ http://www.instructables.com/files/deriv/FLP/HU2J/GNFSJYOP/FLPHU2JGNFSJYOP.SQUARE2.jpg http://www.instructables.com/files/deriv/FLP/HU2J/GNFSJYOP/FLPHU2JGNFSJYOP.SQUARE.jpg http://www.instructables.com/files/deriv/FLP/HU2J/GNFSJYOP/FLPHU2JGNFSJYOP.SMALL.jpg factpass Why do you need to go to the sport shale and spend $100 on bicycler rack.  Easy way to make make it by yourself. You need: 1.  plastic tubes  2. glue  3. hose clams 4. fretsaw 5. screwdriver
By: factpass

Continue Reading »]]> Thu, 12 May 2011 18:47:51 PDT http://www.instructables.com/id/Guerilla-Bike-Rack/
Guerilla Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F72/DTHT/GN4D0CAS/F72DTHTGN4D0CAS.SQUARE2.jpg http://www.instructables.com/files/deriv/F72/DTHT/GN4D0CAS/F72DTHTGN4D0CAS.SQUARE.jpg http://www.instructables.com/files/deriv/F72/DTHT/GN4D0CAS/F72DTHTGN4D0CAS.SMALL.jpg dswaim Tired of walking your bike past empty parking spots just looking for a rack to lock up your bike? Well now through a small re-appropriation of public space and a few junked bikes, you can be the difference you wish to see in your town. Scoop up a couple old bikes Step 1: Find two old bike frames...
By: dswaim

Continue Reading »]]> Sun, 1 May 2011 23:58:11 PDT http://www.instructables.com/id/Two-Bike-Bike-Rack/
Two Bike Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FQ0/QCAV/GLPH18MH/FQ0QCAVGLPH18MH.SQUARE2.jpg http://www.instructables.com/files/deriv/FQ0/QCAV/GLPH18MH/FQ0QCAVGLPH18MH.SQUARE.jpg http://www.instructables.com/files/deriv/FQ0/QCAV/GLPH18MH/FQ0QCAVGLPH18MH.SMALL.jpg Pankake I wanted a way to store my two bikes inside with as little room as possible. I saw a bike rack at my local bike shop and looked it up online here . $90? That's too much for me to spend on something so simple. I figured I could make it out of 2x4s and some bolts.... so I did. Design Your Rack Thi...
By: Pankake

Continue Reading »]]> Thu, 21 Apr 2011 07:14:08 PDT http://www.instructables.com/id/10-Bike-Pannier-Conversion-for-a-Messengerany-B/ http://www.instructables.com/files/deriv/FQW/BQXP/GKS0W0MX/FQWBQXPGKS0W0MX.SQUARE2.jpg http://www.instructables.com/files/deriv/FQW/BQXP/GKS0W0MX/FQWBQXPGKS0W0MX.SQUARE.jpg http://www.instructables.com/files/deriv/FQW/BQXP/GKS0W0MX/FQWBQXPGKS0W0MX.SMALL.jpg chamnit Store bought bike pannier suck. They are ridiculously expensive, uncomfortable to carry around, and aren’t much good for anything else. For light commuting, I don’t want to have to shell out a ton of cash for carrying stuff on a bike rack, even though my back is starting to argue with me.  Most of ...
By: chamnit

Continue Reading »]]> Sun, 13 Mar 2011 11:28:15 PDT http://www.instructables.com/id/Vertical-Bike-Rack/ http://cdn.instructables.com/FMW/X12J/GKS0TQKK/FMWX12JGKS0TQKK.SQUARE2.jpg http://cdn.instructables.com/FMW/X12J/GKS0TQKK/FMWX12JGKS0TQKK.SQUARE.jpg http://cdn.instructables.com/FMW/X12J/GKS0TQKK/FMWX12JGKS0TQKK.SMALL.jpg red19fire I used some bits from ikea to make a vertical bike rack for two bikes. Drill some bar stock, mount 'coat hanger' things, and attach to the ikea pole.  DONE. $60 in material, 4 hours to assemble.  cheapest store-bought bike rack:  $120.
By: red19fire

Continue Reading »]]> Mon, 7 Mar 2011 11:17:13 PST http://www.instructables.com/id/Indoor-Bike-Parking-Rack/
Indoor Bike Parking Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FST/J0LZ/GB5HD5M1/FSTJ0LZGB5HD5M1.SQUARE2.jpg http://www.instructables.com/files/deriv/FST/J0LZ/GB5HD5M1/FSTJ0LZGB5HD5M1.SQUARE.jpg http://www.instructables.com/files/deriv/FST/J0LZ/GB5HD5M1/FSTJ0LZGB5HD5M1.SMALL.jpg lamoix Like most houses in Portland, we have a lot of bicycles, and we are always coming and going on them, often changing out bikes several times a day. Not satisfied with outdoor parking, or stacks of bicycles in the workshop, I decided to build some indoor bike parking. It allows for both front or rear ...
By: lamoix

Continue Reading »]]> Mon, 5 Jul 2010 22:22:13 PDT http://www.instructables.com/id/Bike-Party-Sound-System-Basic-Rear-Rack-Style/
Bike Party Sound System - Easy Rear Rack Style - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F83/CX6U/G8TCERF2/F83CX6UG8TCERF2.SQUARE2.jpg http://www.instructables.com/files/deriv/F83/CX6U/G8TCERF2/F83CX6UG8TCERF2.SQUARE.jpg http://www.instructables.com/files/deriv/F83/CX6U/G8TCERF2/F83CX6UG8TCERF2.SMALL.jpg dan Spring is coming, and there's nothing more fun than a group ride through town with 10, 100 or 1,000 of your closest friends.  I've been on a lot of group rides and if there is 1 thing that really ads to the event its COSTUMES.  and if there is a 2nd thing, its MUSIC.  having a good sound system real...
By: dan

Continue Reading »]]> Thu, 6 May 2010 17:23:21 PDT http://www.instructables.com/id/Make-a-Rear-Bike-Rack-from-Scavenged-Kitchen-Mater/
Make a Rear Bike Rack from Scavenged Kitchen Materials - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FLR/7UVJ/G8TCT9ES/FLR7UVJG8TCT9ES.SQUARE2.jpg http://www.instructables.com/files/deriv/FLR/7UVJ/G8TCT9ES/FLR7UVJG8TCT9ES.SQUARE.jpg http://www.instructables.com/files/deriv/FLR/7UVJ/G8TCT9ES/FLR7UVJG8TCT9ES.SMALL.jpg yoyology I've been wanting a cargo rack for my bike for awhile, but didn't have the cash to buy a manufactured one.  Then my eye fell upon the beautiful pot rack I made a couple of years ago, and it occurred to me that some of that wire shelving might be just the thing I needed.  There was some trial and err...
By: yoyology

Continue Reading »]]> Wed, 5 May 2010 21:23:04 PDT http://www.instructables.com/id/Side-shelf-for-a-bike/
Side shelf for a bike - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1G/JYG9/G8LWTEQO/F1GJYG9G8LWTEQO.SQUARE2.jpg http://www.instructables.com/files/deriv/F1G/JYG9/G8LWTEQO/F1GJYG9G8LWTEQO.SQUARE.jpg http://www.instructables.com/files/deriv/F1G/JYG9/G8LWTEQO/F1GJYG9G8LWTEQO.SMALL.jpg Carry_it  Carry anything from a canvas to a briefcase using this simple device. With just a little bit of handy work and a trip to the hardware store, all your colleagues and friends will stand in awe.  check out www.carry-it.org for more solutions to your carrying needs. Measure  Once you have a rack(al...
By: Carry_it

Continue Reading »]]> Sat, 1 May 2010 20:16:18 PDT http://www.instructables.com/id/Bike-Book-Holder/
Bike Book Holder - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FKY/PE2Q/G43EG0CV/FKYPE2QG43EG0CV.SQUARE2.jpg http://www.instructables.com/files/deriv/FKY/PE2Q/G43EG0CV/FKYPE2QG43EG0CV.SQUARE.jpg http://www.instructables.com/files/deriv/FKY/PE2Q/G43EG0CV/FKYPE2QG43EG0CV.SMALL.jpg resquebilly I got this idea from reading about another project on Instructables using spare bike stem to create a BIKE ON A TRAINER. Expanding on that idea and having experience with PVC pipe I created another version for a road bike mounted on a TRAINER for about $20.00 and a few hours work. This would be alte...
By: resquebilly

Continue Reading »]]> Fri, 8 Jan 2010 13:13:07 PST http://www.instructables.com/id/Truck-Bed-Bike-Rack/
Truck Bed Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F69/OJMC/FYTD4SFE/F69OJMCFYTD4SFE.SQUARE2.jpg http://www.instructables.com/files/deriv/F69/OJMC/FYTD4SFE/F69OJMCFYTD4SFE.SQUARE.jpg http://www.instructables.com/files/deriv/F69/OJMC/FYTD4SFE/F69OJMCFYTD4SFE.SMALL.jpg hpstoutharrow This bike rack is made from steel fence posts, plumbing fittings, various threaded hardware, and two hockey pucks for good measure. As always, everything is right off the shelves of the local big box hardware store. No special order parts here. Also no truck beds were harmed (drilled / cut or w...
By: hpstoutharrow

Continue Reading »]]> Sat, 5 Sep 2009 16:15:12 PDT http://www.instructables.com/id/Bicycle-Rack-for-Childs-Bicycle/
Bicycle Rack for Child's Bicycle - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTT/6T2L/FYIYO0FA/FTT6T2LFYIYO0FA.SQUARE2.jpg http://www.instructables.com/files/deriv/FTT/6T2L/FYIYO0FA/FTT6T2LFYIYO0FA.SQUARE.jpg http://www.instructables.com/files/deriv/FTT/6T2L/FYIYO0FA/FTT6T2LFYIYO0FA.SMALL.jpg darlingtom Introduction: A simple rear rack for a child's bicycle, but it could be used on any size bike. It is made with some old curtain rods, some left over bolts, and an old board. It is not as solid as I would like; read the end of this intro below. Backstory: My son learned to ride a two wheel bike this...
By: darlingtom

Continue Reading »]]> Tue, 18 Aug 2009 20:14:42 PDT http://www.instructables.com/id/BIKE-RACK-HITCH-TRAILER/ http://www.instructables.com/files/deriv/F5A/YWPD/FWYHS0WF/F5AYWPDFWYHS0WF.SQUARE2.jpg http://www.instructables.com/files/deriv/F5A/YWPD/FWYHS0WF/F5AYWPDFWYHS0WF.SQUARE.jpg http://www.instructables.com/files/deriv/F5A/YWPD/FWYHS0WF/F5AYWPDFWYHS0WF.SMALL.jpg 247 this was made a year or two ago. i didn't use the trailer on my bike though, i made a hitch for my friends electric scooter... very useful!
By: 247

Continue Reading »]]> Thu, 16 Jul 2009 15:08:32 PDT http://www.instructables.com/id/PVC-and-Milk-Basket-Bike-Basket/
PVC and Milk Basket Bike Basket - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FOM/SWE4/FT17YMIF/FOMSWE4FT17YMIF.SQUARE2.jpg http://www.instructables.com/files/deriv/FOM/SWE4/FT17YMIF/FOMSWE4FT17YMIF.SQUARE.jpg http://www.instructables.com/files/deriv/FOM/SWE4/FT17YMIF/FOMSWE4FT17YMIF.SMALL.jpg bonedoggie I needed a simple and cheap way to carry vegetables from our crop share this Summer. I really like my cruiser bike, but did not want to buy a basket. I made the following with some left over PVC and a milk basket I am borrowing. Get the Supplies A basket, and some 3/4" PVC pipe & fittings. I n...
By: bonedoggie

Continue Reading »]]> Thu, 2 Apr 2009 18:06:16 PDT http://www.instructables.com/id/Tail-light-for-bike-rack/
Tail light for bike rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F6I/827A/FQR1WZK1/F6I827AFQR1WZK1.SQUARE2.jpg http://www.instructables.com/files/deriv/F6I/827A/FQR1WZK1/F6I827AFQR1WZK1.SQUARE.jpg http://www.instructables.com/files/deriv/F6I/827A/FQR1WZK1/F6I827AFQR1WZK1.SMALL.jpg a.doovz I built this light for the bicycle rack on the rear of my car. It serves as an additional tail light and brake light.Why: When I load the rack with several bikes, they often obscure the car's tail lights and upper brake light. This project helps make the car more visible, at day and at night.Prer...
By: a.doovz

Continue Reading »]]> Sun, 8 Feb 2009 17:42:33 PST http://www.instructables.com/id/Coat-Rack-From-Bike-Bits/
Coat Rack From Bicycle Parts! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFL/91KY/FQMXES1L/FFL91KYFQMXES1L.SQUARE2.jpg http://www.instructables.com/files/deriv/FFL/91KY/FQMXES1L/FFL91KYFQMXES1L.SQUARE.jpg http://www.instructables.com/files/deriv/FFL/91KY/FQMXES1L/FFL91KYFQMXES1L.SMALL.jpg drinkmorecoffee I work at a community bike shop on Sundays and Mondays. It's a lot of fun, but with all the cold weather we had a problem. We were in desperate need of a coat rack. Mainly because we wanted to sit down every once in a while, and all the chairs were piled high with coats.Meanwhile there were scrap bi...
By: drinkmorecoffee

Continue Reading »]]> Tue, 3 Feb 2009 11:51:25 PST http://www.instructables.com/id/25-Rack-stores-five-bicycles/ http://www.instructables.com/files/deriv/FO0/UZ2P/FOHTTREB/FO0UZ2PFOHTTREB.SQUARE2.jpg http://www.instructables.com/files/deriv/FO0/UZ2P/FOHTTREB/FO0UZ2PFOHTTREB.SQUARE.jpg http://www.instructables.com/files/deriv/FO0/UZ2P/FOHTTREB/FO0UZ2PFOHTTREB.SMALL.jpg Handsome-Ryan This is a wooden rack I built to store 5 of my bicycles. It is constructed of 2x4 and 2x2 lumber assembled with glue and screws and the shelves are nailed on with steel framing brackets. The total cost for materials was about $25 and it could be built even cheaper if you can find 2x3 lumber or you h...
By: Handsome-Ryan

Continue Reading »]]> Thu, 11 Dec 2008 11:39:04 PST http://www.instructables.com/id/Two-Dollar-Bike-Rack-Headlight/
Two Dollar Bike Rack / Headlight - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FB7/IJ28/FNNJYJTS/FB7IJ28FNNJYJTS.SQUARE2.jpg http://www.instructables.com/files/deriv/FB7/IJ28/FNNJYJTS/FB7IJ28FNNJYJTS.SQUARE.jpg http://www.instructables.com/files/deriv/FB7/IJ28/FNNJYJTS/FB7IJ28FNNJYJTS.SMALL.jpg alpacalypse First off let me give props where they are due, this idea was inspired largely by the instructable posted by mydian_nightshade called Cheap bike rack. Please visit his piece to fill in any gaps on construction or to see what else can be done using this same process. My documentation was done without...
By: alpacalypse

Continue Reading »]]> Sun, 23 Nov 2008 23:58:14 PST http://www.instructables.com/id/Make-a-Scrappy-Bike-Rack/
Make a Scrappy Bike Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAI/RL3Y/FLLZV1D5/FAIRL3YFLLZV1D5.SQUARE2.jpg http://www.instructables.com/files/deriv/FAI/RL3Y/FLLZV1D5/FAIRL3YFLLZV1D5.SQUARE.jpg http://www.instructables.com/files/deriv/FAI/RL3Y/FLLZV1D5/FAIRL3YFLLZV1D5.SMALL.jpg carpespasm In this instructable I'll go over how I made a pretty nice bicycle luggage rack for free. The whole thing is made with scavenged parts and is easy to make with little more than a drill, hammer, and hack saw. Not a weld in sight. If you don't want to shell out 20-50 bucks for such a rack and can scro...
By: carpespasm

Continue Reading »]]> Sun, 28 Sep 2008 10:12:55 PDT http://www.instructables.com/id/Bracket-For-Using-Seat-Post-Bicycle-Lights-On-Your/
Bracket For Using Seat Post Bicycle Lights On Your Rack - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4H/5WAG/FKLD2UCM/F4H5WAGFKLD2UCM.SQUARE2.jpg http://www.instructables.com/files/deriv/F4H/5WAG/FKLD2UCM/F4H5WAGFKLD2UCM.SQUARE.jpg http://www.instructables.com/files/deriv/F4H/5WAG/FKLD2UCM/F4H5WAGFKLD2UCM.SMALL.jpg scottredd This Instructable will show how I built a bracket that allows me to attach seat post mounted lights to the back of my bicycle's rack. After researching to find the best rear flasher, I decided upon the Planet Bike Superflash. Unfortunately, it's designed to be mounted to the seat post, or by using...
By: scottredd

Continue Reading »]]> Sat, 6 Sep 2008 22:28:38 PDT http://www.instructables.com/id/Build-your-own-bike-rack/
Build your own bike rack! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJU/O8WO/FKLD2MY0/FJUO8WOFKLD2MY0.SQUARE2.jpg http://www.instructables.com/files/deriv/FJU/O8WO/FKLD2MY0/FJUO8WOFKLD2MY0.SQUARE.jpg http://www.instructables.com/files/deriv/FJU/O8WO/FKLD2MY0/FJUO8WOFKLD2MY0.SMALL.jpg pyrotechnical If you've got access to a welder and some metal, then make your own bike rack, it can be a lot cheaper, and can be modified to suit your needs. Sorry I didn't take any pictures of the building process, hope you'll get the jist of how to build it and build your own. Enjoy. The beginning! The first...
By: pyrotechnical

Continue Reading »]]> Wed, 3 Sep 2008 21:42:53 PDT http://www.instructables.com/id/Local-shopping-by-bike-with-half-a-cat-basket/
Local shopping by bike with half a cat carrier-basket - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FDT/WEJY/FFRCP0BF/FDTWEJYFFRCP0BF.SQUARE2.jpg http://www.instructables.com/files/deriv/FDT/WEJY/FFRCP0BF/FDTWEJYFFRCP0BF.SQUARE.jpg http://www.instructables.com/files/deriv/FDT/WEJY/FFRCP0BF/FDTWEJYFFRCP0BF.SMALL.jpg P. J. This is a 'how to fasten an alternative bicycle basket onto the back of a bike' instructable. It's for when zip ties wont do. There are other options. Velcro ... if you want to take the chance it wont come away. Strong magnets ... if you don't mind how they might affect electronic equipment, cred...
By: P. J.

Continue Reading »]]> Sat, 3 May 2008 06:19:21 PDT http://www.instructables.com/id/Unicycle-rack-for-a-motorcycle-the-UniRack/
Unicycle rack for a motorcycle (the UniRack) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4B/6FC4/FFJXMMLS/F4B6FC4FFJXMMLS.SQUARE2.jpg http://www.instructables.com/files/deriv/F4B/6FC4/FFJXMMLS/F4B6FC4FFJXMMLS.SQUARE.jpg http://www.instructables.com/files/deriv/F4B/6FC4/FFJXMMLS/F4B6FC4FFJXMMLS.SMALL.jpg CorbinsTreehouse How to build a unicycle rack for a Harley Davidson motorcycle. Don't let riding your motorcycle stop you from riding your unicycle! Supports both a 20" trials unicycle, and also a standard 24" mountain unicycle. Cut up an old bicycle First off, you need some steel. I used an old bicycle and cut i...
By: CorbinsTreehouse

Continue Reading »]]> Sun, 27 Apr 2008 16:30:40 PDT http://www.instructables.com/id/Backpack-panniers-that-are-still-backpacks/
Backpack panniers (that are still backpacks) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FIM/UW2H/FD80WSZ1/FIMUW2HFD80WSZ1.SQUARE2.jpg http://www.instructables.com/files/deriv/FIM/UW2H/FD80WSZ1/FIMUW2HFD80WSZ1.SQUARE.jpg http://www.instructables.com/files/deriv/FIM/UW2H/FD80WSZ1/FIMUW2HFD80WSZ1.SMALL.jpg gclarke Simple way of making your backpack mountable on your bike rack, without losing any backpack functionality. What you need: *backpack *webbing, or fabric that you really trust. Webbing is everywhere, though. You could even trim a little off of a strap off your bag. I pulled mine off of a suitcase i ...
By: gclarke

Continue Reading »]]> Thu, 28 Feb 2008 19:29:41 PST http://www.instructables.com/id/Bicycle-rack-from-old-skis-and-ski-poles/
Bicycle rack from old skis and ski poles - More DIY How To Projects]]> http://cdn.instructables.com/FT7/KS1S/F3LMO0RL/FT7KS1SF3LMO0RL.SQUARE2.jpg http://cdn.instructables.com/FT7/KS1S/F3LMO0RL/FT7KS1SF3LMO0RL.SQUARE.jpg http://cdn.instructables.com/FT7/KS1S/F3LMO0RL/FT7KS1SF3LMO0RL.SMALL.jpg Toxictom Bicycle parking rack for 5 bikes made from old skis and ski poles. Wood or PVC pipe could be used in place of skis and poles. I just happened to have these available and didn't want to throw them away. Lay out base. To make a rack that can park bikes on both sides attach three cross members acr...
By: Toxictom

Continue Reading »]]> Mon, 2 Jul 2007 01:58:16 PDT http://www.instructables.com/id/Outdoor-Bike-Rack/
Outdoor Bike Rack - More DIY How To Projects]]> http://cdn.instructables.com/F92/G05M/F2H0OYCK/F92G05MF2H0OYCK.SQUARE2.jpg http://cdn.instructables.com/F92/G05M/F2H0OYCK/F92G05MF2H0OYCK.SQUARE.jpg http://cdn.instructables.com/F92/G05M/F2H0OYCK/F92G05MF2H0OYCK.SMALL.jpg captain Jack Living by the beach, you depend on your bicycle as more or less your main mode of transportation. Whether it be shopping for groceries, traveling to bars, or visiting friends, its nice to be able to keep your bike in an accessible location. Usually that means somewhere in the garage, behind cars o...
By: captain Jack

Continue Reading »]]> Mon, 4 Jun 2007 17:06:19 PDT http://www.instructables.com/id/simple-bike-storage-rack-for-many-bikes-in-small-a/
Bike Rack / Bike Storage for the Home or Apartment - More DIY How To Projects]]> http://cdn.instructables.com/F2J/R9UO/J2JET9K5Q2T/F2JR9UOJ2JET9K5Q2T.SQUARE2.jpg http://cdn.instructables.com/F2J/R9UO/J2JET9K5Q2T/F2JR9UOJ2JET9K5Q2T.SQUARE.jpg http://cdn.instructables.com/F2J/R9UO/J2JET9K5Q2T/F2JR9UOJ2JET9K5Q2T.SMALL.jpg dan On a typical morning - after a bowl of oats and a cup of green tea - I head out the door and bike to work.  Well, I try to head for the door.  Usually I'll get to about spitting distance before stumbling over a Specialized or a Giant.  I'll move those to the side and get about 2 more steps.  Then i'...
By: dan

Continue Reading »]]> Thu, 19 Oct 2006 16:24:49 PDT http://www.instructables.com/id/Bike-Rack/
Bike Rack - More DIY How To Projects]]> http://cdn.instructables.com/FAF/QE1B/0CFEP27SIPC/FAFQE1B0CFEP27SIPC.SQUARE2.jpg http://cdn.instructables.com/FAF/QE1B/0CFEP27SIPC/FAFQE1B0CFEP27SIPC.SQUARE.jpg http://cdn.instructables.com/FAF/QE1B/0CFEP27SIPC/FAFQE1B0CFEP27SIPC.SMALL.jpg imarunner2 This is a simple bike rack constructed from 3/4" PVC pipe. Cut PVC parts to length Parts List: All 3/4" Schedule 40 PVC (2) Wheel Upright - 22 3/4" (2) Wheel base - 12 1/2" (4) Base - 7" (5) Splices - 1 1/4" (6) Elbows - 90 degree (6) Tees PVC Glue Assemble using PVC cement. Use the new bi...
By: imarunner2

Continue Reading »]]> Fri, 9 Dec 2005 16:19:24 PST http://www.instructables.com/id/Foldaway-bike-racks/
Foldaway bike racks - More DIY How To Projects]]> http://cdn.instructables.com/FZH/G034/4SMEP27QQEI/FZHG0344SMEP27QQEI.SQUARE2.jpg http://cdn.instructables.com/FZH/G034/4SMEP27QQEI/FZHG0344SMEP27QQEI.SQUARE.jpg http://cdn.instructables.com/FZH/G034/4SMEP27QQEI/FZHG0344SMEP27QQEI.SMALL.jpg joe I always have people staying with me who have bikes. I needed a way store all of there bikes in my garage and still have space to parka car and build. This simple project lets you make cheap fold away bike racks. The materials 1 1x4x48 wood 4 2" wood screws 4 Washers Measurements I made one pi...
By: joe

Continue Reading »]]> Tue, 16 Aug 2005 08:56:13 PDT