Instructables: exploring - outside - knives http://www.instructables.com Tue, 28 Apr 2015 03:40:47 PDT BLOX v1.01 Acid/Brass/Stone Washing A Knife http://www.instructables.com/id/AcidBrassStone-Washing-A-Knife/
Acid/Brass/Stone Washing A Knife - More DIY How To Projects]]> http://cdn.instructables.com/FR0/G5CX/I8UV4P31/FR0G5CXI8UV4P31.SQUARE2.jpg http://cdn.instructables.com/FR0/G5CX/I8UV4P31/FR0G5CXI8UV4P31.SQUARE.jpg http://cdn.instructables.com/FR0/G5CX/I8UV4P31/FR0G5CXI8UV4P31.SMALL.jpg brokerolla For my first Instructable, I thought I would lay out a step-by-step guide to creating a one of a kind look for any knife. This will work for any knife (actually any item made of steel!), so long as you have large enough containers to fit them in. Safety Notes! DISCLAIMERS: Don't do this kind of ...
By: brokerolla

Continue Reading »]]>
Thu, 23 Apr 2015 23:16:35 PDT
Knife Sharpening http://www.instructables.com/id/Knife-Sharpening-2/
Knife Sharpening - More DIY How To Projects]]> http://cdn.instructables.com/FTR/D6FE/I8OBF6D9/FTRD6FEI8OBF6D9.SQUARE2.jpg http://cdn.instructables.com/FTR/D6FE/I8OBF6D9/FTRD6FEI8OBF6D9.SQUARE.jpg http://cdn.instructables.com/FTR/D6FE/I8OBF6D9/FTRD6FEI8OBF6D9.SMALL.jpg Noah smith This is my first instruct able so make suggestions but don't be too hard on me. I have recently took up in a hobby of knife making my knifes were nice and good quality but didn't have that shave sharp edge that is a bragging point of a knife maker. The solution to my problem was when I showed my gr...
By: Noah smith

Continue Reading »]]>
Sun, 19 Apr 2015 19:54:15 PDT
My first knife http://www.instructables.com/id/My-first-knife-1/
My first knife - More DIY How To Projects]]> http://cdn.instructables.com/F3K/A47F/I8J9WXQ0/F3KA47FI8J9WXQ0.SQUARE2.jpg http://cdn.instructables.com/F3K/A47F/I8J9WXQ0/F3KA47FI8J9WXQ0.SQUARE.jpg http://cdn.instructables.com/F3K/A47F/I8J9WXQ0/F3KA47FI8J9WXQ0.SMALL.jpg monkeywork First read this instructable.http://www.instructables.com/id/Fixed-Blade-Knife/Seriously. If I hadn't I would have never tried this.Tools:Grinder with cut off wheelBelt sander with 60 and 80 gritSand paperBand SawHacksawDremel toolMaterials:SteelwoodBrassEpoxyFinishing oil So I had this chunk of s...
By: monkeywork

Continue Reading »]]>
Thu, 16 Apr 2015 14:00:47 PDT
Opinel Knife Tuning and Mods http://www.instructables.com/id/Opinel-Knife-Tuning-and-Mods/
Opinel Knife Tuning and Mods - More DIY How To Projects]]> http://cdn.instructables.com/FFT/JQOG/I8H6B6TP/FFTJQOGI8H6B6TP.SQUARE2.jpg http://cdn.instructables.com/FFT/JQOG/I8H6B6TP/FFTJQOGI8H6B6TP.SQUARE.jpg http://cdn.instructables.com/FFT/JQOG/I8H6B6TP/FFTJQOGI8H6B6TP.SMALL.jpg mrpesas I recently purchased an Opinel No6. It is the Stainless (Inox) version with Bubinga wood. It is a great little knife. However, when it arrived it was way too tight. I had a very difficult time opening the blade and had to force it the last few cm's to fully open it. Opinel's wood handles are known f...
By: mrpesas

Continue Reading »]]>
Wed, 15 Apr 2015 07:24:47 PDT
Edible Knife Handle http://www.instructables.com/id/Edible-Knife-Handle/
Edible Knife Handle - More DIY How To Projects]]> http://cdn.instructables.com/FE5/Y53M/I86LS5OI/FE5Y53MI86LS5OI.SQUARE2.jpg http://cdn.instructables.com/FE5/Y53M/I86LS5OI/FE5Y53MI86LS5OI.SQUARE.jpg http://cdn.instructables.com/FE5/Y53M/I86LS5OI/FE5Y53MI86LS5OI.SMALL.jpg Corinbw Before we get started, let me just say that this knife handle is edible, it is made out of carmelized honey that hardens when it is cooled.I wanted to make a knife and toolThis knife had four survival components-A knife with a tang-A hardened honey handle that you could eat if you were starving-Matc...
By: Corinbw

Continue Reading »]]>
Mon, 6 Apr 2015 22:51:24 PDT
Knife out of a railroad spike http://www.instructables.com/id/Knife-out-of-a-railroad-spike/
Knife out of a railroad spike - More DIY How To Projects]]> http://cdn.instructables.com/F83/RR45/I86UDPPA/F83RR45I86UDPPA.SQUARE2.jpg http://cdn.instructables.com/F83/RR45/I86UDPPA/F83RR45I86UDPPA.SQUARE.jpg http://cdn.instructables.com/F83/RR45/I86UDPPA/F83RR45I86UDPPA.SMALL.jpg Jake_Makes This is a knife I made recently, a knife out of a railroad spike. I didn't have any of the correct tools, except for maybe a hammer, so I'm not going to make a full Instructable out of it. I used an old broken weight as an anvil, vice grips, and a small forge made of bricks. I got it to the basic sh...
By: Jake_Makes

Continue Reading »]]>
Sun, 5 Apr 2015 09:45:02 PDT
Knife Making With Basic Tools http://www.instructables.com/id/Fixed-Blade-Knife/
Knife Making With Basic Tools - More DIY How To Projects]]> http://cdn.instructables.com/FX7/YEOU/I7XR8G20/FX7YEOUI7XR8G20.SQUARE2.jpg http://cdn.instructables.com/FX7/YEOU/I7XR8G20/FX7YEOUI7XR8G20.SQUARE.jpg http://cdn.instructables.com/FX7/YEOU/I7XR8G20/FX7YEOUI7XR8G20.SMALL.jpg Phiske The knife. Where would we be without it? One of the singularly most useful tools in existence. Sure you can buy a relatively inexpensive beautiful knife that will last a while, but...where's the fun in that? Handcrafting mankind's most basic tool to fit your unique style and your hand can bring ...
By: Phiske

Continue Reading »]]>
Sun, 29 Mar 2015 16:42:17 PDT
Easy Paper/Metal Ninja Star http://www.instructables.com/id/Easy-PaperMetal-Ninja-Star/
Easy Paper/Metal Ninja Star - More DIY How To Projects]]> http://cdn.instructables.com/F56/ELMQ/I7N602PE/F56ELMQI7N602PE.SQUARE2.jpg http://cdn.instructables.com/F56/ELMQ/I7N602PE/F56ELMQI7N602PE.SQUARE.jpg http://cdn.instructables.com/F56/ELMQ/I7N602PE/F56ELMQI7N602PE.SMALL.jpg Iron_Anvil All you need is two pieces of printer paper for the paper star, and a piece of sheet metal roughly 12 cm by 12 cm for the metal star. For tools all you need is a pair of scissors, a hacksaw, a vise and a file. Make sure to wear safety glasses when cutting or filing the metal star, or whenever you fi...
By: Iron_Anvil

Continue Reading »]]>
Wed, 25 Mar 2015 12:52:47 PDT
Turquoise Insets Made Easy http://www.instructables.com/id/Turquoise-Insets-Made-Easy/
Turquoise Insets Made Easy - More DIY How To Projects]]> http://cdn.instructables.com/F4H/57TU/I7NL20RB/F4H57TUI7NL20RB.SQUARE2.jpg http://cdn.instructables.com/F4H/57TU/I7NL20RB/F4H57TUI7NL20RB.SQUARE.jpg http://cdn.instructables.com/F4H/57TU/I7NL20RB/F4H57TUI7NL20RB.SMALL.jpg graydog111 I am retired and have a lot of time to mess around on my 15 acres and in my shop. I have made knives by buying a knife "blade" (AKA "blank") on eBay and making the handles from one of my Bois D'Arc trees, and I have made them from old car leaf springs. This time I wanted a different look. I bought...
By: graydog111

Continue Reading »]]>
Tue, 24 Mar 2015 11:39:58 PDT
survival knife http://www.instructables.com/id/survival-knife-4/
survival knife - More DIY How To Projects]]> http://cdn.instructables.com/FI4/WKX8/I7HG6TB6/FI4WKX8I7HG6TB6.SQUARE2.jpg http://cdn.instructables.com/FI4/WKX8/I7HG6TB6/FI4WKX8I7HG6TB6.SQUARE.jpg http://cdn.instructables.com/FI4/WKX8/I7HG6TB6/FI4WKX8I7HG6TB6.SMALL.jpg snake95 This is a knife I made not too long ago and it'd ideal for run of the mill trips in the woods so if you guys like the look of it I well post more pics and a how to make
By: snake95

Continue Reading »]]>
Fri, 20 Mar 2015 05:48:49 PDT
Nail Katana http://www.instructables.com/id/Nail-Katana-1/
Nail Katana - More DIY How To Projects]]> http://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SQUARE2.jpg http://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SQUARE.jpg http://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SMALL.jpg extense This instructable will show you how to make a fully functionnal miniature blade as well as a miniature scabbard - the former from an ordinary iron nail, and the latter from a strip aluminium can. Although not technically a true katana, I thought I'd use the name anyway. Why?Because I can now call it...
By: extense

Continue Reading »]]>
Sat, 14 Mar 2015 20:31:28 PDT
SHTF Knife Sharpening http://www.instructables.com/id/SHTF-Knife-Sharpening/
SHTF Knife Sharpening - More DIY How To Projects]]> http://cdn.instructables.com/FYR/CX17/I78VJN5T/FYRCX17I78VJN5T.SQUARE2.jpg http://cdn.instructables.com/FYR/CX17/I78VJN5T/FYRCX17I78VJN5T.SQUARE.jpg http://cdn.instructables.com/FYR/CX17/I78VJN5T/FYRCX17I78VJN5T.SMALL.jpg hgb003 In an apocalyptic situation or you are just out in the woods without a sharpening stone, there are many ways to sharpen your knife or axe without one. In this Instructable I will show you a few of them. Car Window If you are near a car and you can get the window down, just run your knife along t...
By: hgb003

Continue Reading »]]>
Sat, 14 Mar 2015 10:34:28 PDT
Make the most of your DIY Laguiole kit http://www.instructables.com/id/Make-the-most-of-your-DIY-Laguiole-kit/
Make the most of your DIY Laguiole kit - More DIY How To Projects]]> http://cdn.instructables.com/FZG/WFBM/I6NI33F0/FZGWFBMI6NI33F0.SQUARE2.jpg http://cdn.instructables.com/FZG/WFBM/I6NI33F0/FZGWFBMI6NI33F0.SQUARE.jpg http://cdn.instructables.com/FZG/WFBM/I6NI33F0/FZGWFBMI6NI33F0.SMALL.jpg Deslivres I spent the last Christmas vacation with my family, and my brother gave our dad a DIY Laguiole knife kit just waiting to be put together. My dad jumped at the chance to put his knife together on a corner of the dinner table and there are a few things we could have done better, ranging from basic rea...
By: Deslivres

Continue Reading »]]>
Fri, 27 Feb 2015 07:44:55 PST
Survival knife 3 http://www.instructables.com/id/Survival-knife-3/
Survival knife 3 - More DIY How To Projects]]> http://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SQUARE2.jpg http://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SQUARE.jpg http://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SMALL.jpg mandamados Overall Length: 33 cmBlade Thickness: 5 mmBlade Material: Uddeholm sleipner steel Grinding I used Uddeholm Sleipner tool steel, 8mm thick. But the knife should be about 5 mm thick, so it should be ground. Use a dust mask for safety. Profiling the knife shape Profiling the knife shape with an a...
By: mandamados

Continue Reading »]]>
Tue, 24 Feb 2015 01:29:50 PST
My Hand forged Viking style Knives http://www.instructables.com/id/My-Hand-forged-Viking-style-Knifes/
My Hand forged Viking style Knives - More DIY How To Projects]]> http://cdn.instructables.com/FXF/ZDPF/I697OVEL/FXFZDPFI697OVEL.SQUARE2.jpg http://cdn.instructables.com/FXF/ZDPF/I697OVEL/FXFZDPFI697OVEL.SQUARE.jpg http://cdn.instructables.com/FXF/ZDPF/I697OVEL/FXFZDPFI697OVEL.SMALL.jpg CJStephens I thought I would share some Pictures of my favorite thing to blacksmith. I like these knives because they are balanced and they are a great all around knife to work with. All of these knifes have been hand forged by me. They are made from 1/2 by 1/2 square stock, that I flatten and draw out into th...
By: CJStephens

Continue Reading »]]>
Sun, 15 Feb 2015 09:17:01 PST
Secret Pouch for Pen Knife http://www.instructables.com/id/Secret-Pouch-for-Pen-Knife/
Secret Pouch for Pen Knife - More DIY How To Projects]]> http://cdn.instructables.com/FG8/O5HO/I64XH23G/FG8O5HOI64XH23G.SQUARE2.jpg http://cdn.instructables.com/FG8/O5HO/I64XH23G/FG8O5HOI64XH23G.SQUARE.jpg http://cdn.instructables.com/FG8/O5HO/I64XH23G/FG8O5HOI64XH23G.SMALL.jpg JoshuAc00k I want to carry my Swiss Army Knife on me and have easy access, but I don't want to have it wide open in public incase it makes someone nervous. I usually keep it in my backpack, but searching through the bottom of my bag to get it is a pain in the butt and way too slow. I want easy access to my too...
By: JoshuAc00k

Continue Reading »]]>
Sat, 14 Feb 2015 12:41:50 PST
Knife making with curved Micarta inlay http://www.instructables.com/id/Knife-making-with-curved-Micarta-inlay/
Knife making with curved Micarta inlay - More DIY How To Projects]]> http://cdn.instructables.com/FGS/4T24/I63EZ7SH/FGS4T24I63EZ7SH.SQUARE2.jpg http://cdn.instructables.com/FGS/4T24/I63EZ7SH/FGS4T24I63EZ7SH.SQUARE.jpg http://cdn.instructables.com/FGS/4T24/I63EZ7SH/FGS4T24I63EZ7SH.SMALL.jpg Switch and Lever The video link since it doesn't seem to automatically show up everywhere: https://www.youtube.com/watch?v=xbLchIhcSY4If you're interested in knife making start out by watching/reading my other instructable on this topic, titled: Knife Making with Wood and Brass HandleThis instructable is aimed towar...
By: Switch and Lever

Continue Reading »]]>
Sat, 14 Feb 2015 06:49:18 PST
How to Carve a Wooden Knife (or Dagger) http://www.instructables.com/id/How-to-Carve-a-Wooden-Knife-or-Dagger/
How to Carve a Wooden Knife (or Dagger) - More DIY How To Projects]]> http://cdn.instructables.com/FPE/L2EL/I60062SF/FPEL2ELI60062SF.SQUARE2.jpg http://cdn.instructables.com/FPE/L2EL/I60062SF/FPEL2ELI60062SF.SQUARE.jpg http://cdn.instructables.com/FPE/L2EL/I60062SF/FPEL2ELI60062SF.SMALL.jpg mysterygirl995 This knife is perfect for if Zombies were attacking and you're friend did not have a knife to defend himself. So just make him (her) one. Also It is The cheapest knife to make. I had a blast making this, and I hope you do to :) What You Need Stick (mine was 7 inches long depending on how big you ...
By: mysterygirl995

Continue Reading »]]>
Wed, 11 Feb 2015 15:33:27 PST
Knife sharpening with a whetstone: An easy angle guide for the perfect blade. http://www.instructables.com/id/Sharpening-with-stone-easy-angle-guide-perfect-bla/
Knife sharpening with a whetstone: An easy angle guide for the perfect blade. - More DIY How To Projects]]> http://cdn.instructables.com/FPF/9WV5/I52CKYPV/FPF9WV5I52CKYPV.SQUARE2.jpg http://cdn.instructables.com/FPF/9WV5/I52CKYPV/FPF9WV5I52CKYPV.SQUARE.jpg http://cdn.instructables.com/FPF/9WV5/I52CKYPV/FPF9WV5I52CKYPV.SMALL.jpg esawaya Knife, whetstone, & phone. Perfect blade.Sharpening a knife using a stone can be challenging if you're just starting out and you can actually end up with a dull knife. The basic concept of sharpening a blade is equal angles on both sides. 17-17 - Great! or 22-22 Great! 22-17 means you end up with a ...
By: esawaya

Continue Reading »]]>
Sun, 18 Jan 2015 21:11:48 PST
The Knife Blank http://www.instructables.com/id/How-To-Paracord-Wrap-A-Knife-Blank/
The Knife Blank - More DIY How To Projects]]> http://cdn.instructables.com/FEC/9UR3/I52CMN7J/FEC9UR3I52CMN7J.SQUARE2.jpg http://cdn.instructables.com/FEC/9UR3/I52CMN7J/FEC9UR3I52CMN7J.SQUARE.jpg http://cdn.instructables.com/FEC/9UR3/I52CMN7J/FEC9UR3I52CMN7J.SMALL.jpg dirtbikedude199 The knife blank I will be using to demonstrate is one that is of aluminum and was used to teach some how to profile a blank on so thats why it looks like it does. You may use any blank you choose though I recommend using a scrap or practice piece for your first time. Time To Drill Center punch ...
By: dirtbikedude199

Continue Reading »]]>
Sun, 18 Jan 2015 19:32:04 PST
Arrow Shaped Knife http://www.instructables.com/id/Arrow-Shaped-Knife/
Arrow Shaped Knife - More DIY How To Projects]]> http://cdn.instructables.com/FL3/QJIA/I4UGIKBJ/FL3QJIAI4UGIKBJ.SQUARE2.jpg http://cdn.instructables.com/FL3/QJIA/I4UGIKBJ/FL3QJIAI4UGIKBJ.SQUARE.jpg http://cdn.instructables.com/FL3/QJIA/I4UGIKBJ/FL3QJIAI4UGIKBJ.SMALL.jpg Anthony951 This is the finished product and to make this all you will need is:1. Auto Cad 20152. Time 3. Patience4. 3D printer (Optional) Main Body First you want to start off by drawing a line that is 4 inches long and then you want to make another exact copies 2 inches away so they are parallel. You can d...
By: Anthony951

Continue Reading »]]>
Mon, 12 Jan 2015 20:03:19 PST
Survival Para-chord Taken A Step Further http://www.instructables.com/id/Survival-Para-chord-Taken-A-Step-Further/
Survival Para-chord Taken A Step Further - More DIY How To Projects]]> http://cdn.instructables.com/F1P/NKHF/I48CNPC1/F1PNKHFI48CNPC1.SQUARE2.jpg http://cdn.instructables.com/F1P/NKHF/I48CNPC1/F1PNKHFI48CNPC1.SQUARE.jpg http://cdn.instructables.com/F1P/NKHF/I48CNPC1/F1PNKHFI48CNPC1.SMALL.jpg Haplo1 Ok. Haven't posted in a while plus I've been playing around with paracord. I wrapped the handle of one of my camp knives. (Crappy Colman, cheap enough to experiment with) I got a wrap that I liked but knew if the cord was for potential survival purposes more could be done... 1 By adding around ab...
By: Haplo1

Continue Reading »]]>
Wed, 31 Dec 2014 00:48:20 PST
Wooden knife http://www.instructables.com/id/Wooden-knife-1/
Wooden knife - More DIY How To Projects]]> http://cdn.instructables.com/FSB/6RXI/I49RTOFB/FSB6RXII49RTOFB.SQUARE2.jpg http://cdn.instructables.com/FSB/6RXI/I49RTOFB/FSB6RXII49RTOFB.SQUARE.jpg http://cdn.instructables.com/FSB/6RXI/I49RTOFB/FSB6RXII49RTOFB.SMALL.jpg Aidsmile I went outside and got a stick, and carved it with a craft knife. Then I just put some string around it, and that is basically it. I think I might put it in etsy, for around 5-10 dollars, it's not too good though, so I don't want it to be a high price. Let me know in the comments if you think I shou...
By: Aidsmile

Continue Reading »]]>
Sat, 27 Dec 2014 09:03:32 PST
Tape measure upgrade for EDC pocket knives (swiss army type) http://www.instructables.com/id/DIY-Tape-Measure-Upgrade-for-Victorinox-Knives/
Tape measure upgrade for EDC pocket knives (swiss army type) - More DIY How To Projects]]> http://cdn.instructables.com/FFU/LYN2/I3TH6LP4/FFULYN2I3TH6LP4.SQUARE2.jpg http://cdn.instructables.com/FFU/LYN2/I3TH6LP4/FFULYN2I3TH6LP4.SQUARE.jpg http://cdn.instructables.com/FFU/LYN2/I3TH6LP4/FFULYN2I3TH6LP4.SMALL.jpg Victor Inox I wanted a ruler on my new EDC (every day carry) pocket knife, the Victorinox Cybertool 41. So I decided to make myself a tape measure upgrade which can be easily done in different ways for any Victorinox knife. Print Things you will need:- 1x Din A4 sheet of paper, either white or colored, I use...
By: Victor Inox

Continue Reading »]]>
Thu, 18 Dec 2014 02:50:30 PST
Hunting / Skinning Knife Made Easy http://www.instructables.com/id/Hunting-Skinning-Knife-Made-Easy/
Hunting / Skinning Knife Made Easy - More DIY How To Projects]]> http://cdn.instructables.com/FIB/HHRE/I376RJRR/FIBHHREI376RJRR.SQUARE2.jpg http://cdn.instructables.com/FIB/HHRE/I376RJRR/FIBHHREI376RJRR.SQUARE.jpg http://cdn.instructables.com/FIB/HHRE/I376RJRR/FIBHHREI376RJRR.SMALL.jpg graydog111 There are a lot of posts on here of skilled craftsmen making fixed blade knives from old files, saw blades, etc, but what about the novice wanting to make one knife?This is an introductory for the novice. I bought this blade blank on eBay for about $15 or $20. All I had to do was add the handles (...
By: graydog111

Continue Reading »]]>
Tue, 2 Dec 2014 10:22:56 PST
Bowie Knife http://www.instructables.com/id/Bowie-Knife-2/
Bowie Knife - More DIY How To Projects]]> http://cdn.instructables.com/FNM/OR7P/I34E3VY4/FNMOR7PI34E3VY4.SQUARE2.jpg http://cdn.instructables.com/FNM/OR7P/I34E3VY4/FNMOR7PI34E3VY4.SQUARE.jpg http://cdn.instructables.com/FNM/OR7P/I34E3VY4/FNMOR7PI34E3VY4.SMALL.jpg graydog111 My goal in making this Bowie Knife was to use metal from my scrap pile to make the blade and make the handles (scales) from a dead Black Walnut tree on my acreage. There are a lot of different metals that can be used in a lot of different ways to make a knife. That being said, I have quiet a few ni...
By: graydog111

Continue Reading »]]>
Mon, 1 Dec 2014 12:42:23 PST
Magnetic Paracord Ratchet Release Assistant for Slackline Setups http://www.instructables.com/id/Paracord-Slackline-Ratchet-Assistant/
Magnetic Paracord Ratchet Release Assistant for Slackline Setups - More DIY How To Projects]]> http://cdn.instructables.com/FVA/UPCA/I2KBR4DA/FVAUPCAI2KBR4DA.SQUARE2.jpg http://cdn.instructables.com/FVA/UPCA/I2KBR4DA/FVAUPCAI2KBR4DA.SQUARE.jpg http://cdn.instructables.com/FVA/UPCA/I2KBR4DA/FVAUPCAI2KBR4DA.SMALL.jpg Nor-tea-a This tutorial will show you how to make a handle that will make it easier and easier to tear down your slackline. The 2nd and 3rd images illustrate why this upgrade will help. I got a little bit from the ratchet when I tore it down with out this added handle, while I only had a little blood blister ...
By: Nor-tea-a

Continue Reading »]]>
Sun, 16 Nov 2014 09:35:29 PST
Joker knife shoes http://www.instructables.com/id/Joker-knife-shoes/
Joker knife shoes - More DIY How To Projects]]> http://cdn.instructables.com/FBZ/IWG2/I2I43LE4/FBZIWG2I2I43LE4.SQUARE2.jpg http://cdn.instructables.com/FBZ/IWG2/I2I43LE4/FBZIWG2I2I43LE4.SQUARE.jpg http://cdn.instructables.com/FBZ/IWG2/I2I43LE4/FBZIWG2I2I43LE4.SMALL.jpg thejoker4479 Hey everyone! I'm a huge fan of Nolan's batman trilogy and absolutely love the Joker portrayed by Heath Ledger. In this instructable I made a shoe with a knife in it, like the one Joker had in the movie (he used it when he crushed into Wayne's party) Hope you enjoy Materials 1. Shoes with thick ...
By: thejoker4479

Continue Reading »]]>
Sat, 15 Nov 2014 11:08:20 PST
Zombie Weapon: THE BACHETE http://www.instructables.com/id/Zombie-Weapon-THE-BACHETE/
Zombie Weapon: THE BACHETE - More DIY How To Projects]]> http://cdn.instructables.com/F9O/SKQV/I2I49MHH/F9OSKQVI2I49MHH.SQUARE2.jpg http://cdn.instructables.com/F9O/SKQV/I2I49MHH/F9OSKQVI2I49MHH.SQUARE.jpg http://cdn.instructables.com/F9O/SKQV/I2I49MHH/F9OSKQVI2I49MHH.SMALL.jpg nwalt31 Hello everybody! Today I will be showing you how to build my awesome apocalyptic zombie weapon. I call it the BAHETE! (Baseball bat Machete) Anyway let's get to building! Shopping list:Wood baseball batMachete bladeAssorted nuts and boltsSpray paintEpoxyTools needed:Skill saw or table sawAngle grin...
By: nwalt31

Continue Reading »]]>
Thu, 13 Nov 2014 14:50:26 PST
Sheaf http://www.instructables.com/id/Sheaf/
Sheaf - More DIY How To Projects]]> http://cdn.instructables.com/F42/I3ST/I21R32AF/F42I3STI21R32AF.SQUARE2.jpg http://cdn.instructables.com/F42/I3ST/I21R32AF/F42I3STI21R32AF.SQUARE.jpg http://cdn.instructables.com/F42/I3ST/I21R32AF/F42I3STI21R32AF.SMALL.jpg majity Materials: 2 paper towels, tape, Size Put you knife between the paper towels and marck out line Cut it out and tape it together Tape it all together and see if your knife works Add And popiskile stikes inside sorry for the spelling You chould do extra if you want to
By: majity

Continue Reading »]]>
Sat, 1 Nov 2014 15:07:54 PDT
6 Ton Hydraulic Pin Press http://www.instructables.com/id/6-Ton-Hydraulic-Pin-Press/
6 Ton Hydraulic Pin Press - More DIY How To Projects]]> http://cdn.instructables.com/FAG/0OF6/I1EU5G5J/FAG0OF6I1EU5G5J.SQUARE2.jpg http://cdn.instructables.com/FAG/0OF6/I1EU5G5J/FAG0OF6I1EU5G5J.SQUARE.jpg http://cdn.instructables.com/FAG/0OF6/I1EU5G5J/FAG0OF6I1EU5G5J.SMALL.jpg dc-labs As a knifemaker, the art of making stainless steel pins disappear into bolsters seems to boil down to three things:1). Using very similar material for both bolster and pin2). Cleaning the pin and hole very well.3). Expanding the pin in the hole as best as possible to eliminate any microscopic gap.I'...
By: dc-labs

Continue Reading »]]>
Mon, 20 Oct 2014 08:38:02 PDT
Home Made Knife http://www.instructables.com/id/Home-Made-Knife-4/
Home Made Knife - More DIY How To Projects]]> http://cdn.instructables.com/FSK/DVQ7/I1C3ZW9A/FSKDVQ7I1C3ZW9A.SQUARE2.jpg http://cdn.instructables.com/FSK/DVQ7/I1C3ZW9A/FSKDVQ7I1C3ZW9A.SQUARE.jpg http://cdn.instructables.com/FSK/DVQ7/I1C3ZW9A/FSKDVQ7I1C3ZW9A.SMALL.jpg jhowie103 I made this knife for a friend of mine. He came to me after school with a bunch if materials and a template and asked me to build it for him. I decided to do it and it was a really fun build. Materials My first step that I follow is finding materials that I could use for the build. After I have f...
By: jhowie103

Continue Reading »]]>
Fri, 17 Oct 2014 08:53:35 PDT
Knife Sheath Mod http://www.instructables.com/id/Knife-Sheath-Mod/
Knife Sheath Mod - More DIY How To Projects]]> http://cdn.instructables.com/FYR/HSRP/I19436WD/FYRHSRPI19436WD.SQUARE2.jpg http://cdn.instructables.com/FYR/HSRP/I19436WD/FYRHSRPI19436WD.SQUARE.jpg http://cdn.instructables.com/FYR/HSRP/I19436WD/FYRHSRPI19436WD.SMALL.jpg tony.fantasia I thought I would share a recent, and relatively quick, project that you might be interested in. More and more I am getting requests for knife and dagger sheathes that lie horizontally along the belt rather than down the leg. A client of mine asked mt to take his existing leather sheath with Western...
By: tony.fantasia

Continue Reading »]]>
Tue, 14 Oct 2014 14:56:55 PDT
How to make a throwing spike (bo shruiken) http://www.instructables.com/id/How-to-make-a-throwing-spike-bo-shruiken/
How to make a throwing spike (bo shruiken) - More DIY How To Projects]]> http://cdn.instructables.com/FGR/BVQR/I1AJHGKN/FGRBVQRI1AJHGKN.SQUARE2.jpg http://cdn.instructables.com/FGR/BVQR/I1AJHGKN/FGRBVQRI1AJHGKN.SQUARE.jpg http://cdn.instructables.com/FGR/BVQR/I1AJHGKN/FGRBVQRI1AJHGKN.SMALL.jpg DIYWEAPONS Hello everyone, i am posting this as a celebration of 8000 views. I just want to say a huge thank-you to everyone for your followings, favorites and comments:)So to get started, you will need: 2 four inch wood nails, a file, some adhesive air drying putty and insulating or duct tape. The nails. U...
By: DIYWEAPONS

Continue Reading »]]>
Mon, 13 Oct 2014 08:49:22 PDT
cheap and easy Made Pen knife http://www.instructables.com/id/cheap-and-easy-Made-Pen-knife/
cheap and easy Made Pen knife - More DIY How To Projects]]> http://cdn.instructables.com/FU0/1A6Q/I0TVW7MB/FU01A6QI0TVW7MB.SQUARE2.jpg http://cdn.instructables.com/FU0/1A6Q/I0TVW7MB/FU01A6QI0TVW7MB.SQUARE.jpg http://cdn.instructables.com/FU0/1A6Q/I0TVW7MB/FU01A6QI0TVW7MB.SMALL.jpg ZoyaZ1 The amazing pen knife you make it at home!!!!!! Things what you need: caution!! make this penknife under adult supervision.1: Dry marker or useless fountain pointer.2:Thin copper wire.3.Small Blade 3.5 cm4.Small knife 5.Scissors6:Tape Cut and Fix 1st you remove the pointer nib and cut the uppe...
By: ZoyaZ1

Continue Reading »]]>
Tue, 7 Oct 2014 14:42:48 PDT
PVC Sheath, estuche de PVC http://www.instructables.com/id/PVC-Sheath-estuche-de-PVC/
PVC Sheath, estuche de PVC - More DIY How To Projects]]> http://cdn.instructables.com/FFA/Y6KO/I0VOUTZX/FFAY6KOI0VOUTZX.SQUARE2.jpg http://cdn.instructables.com/FFA/Y6KO/I0VOUTZX/FFAY6KOI0VOUTZX.SQUARE.jpg http://cdn.instructables.com/FFA/Y6KO/I0VOUTZX/FFAY6KOI0VOUTZX.SMALL.jpg DrMarco After a little rust problem with my old sheath I break it and have to make a new one, at first I have to tell my mistake I glued PVC in old sheath with standart PVC glue, not a good Idea because do not seal as good as I want.Well I had to make a new one and take some photos to make this instructable...
By: DrMarco

Continue Reading »]]>
Mon, 6 Oct 2014 08:43:44 PDT
Knife Sheath Repair / Modification http://www.instructables.com/id/Knife-Sheath-Repair-Modification/
Knife Sheath Repair / Modification - More DIY How To Projects]]> http://cdn.instructables.com/F1B/GX38/I0UTQG3E/F1BGX38I0UTQG3E.SQUARE2.jpg http://cdn.instructables.com/F1B/GX38/I0UTQG3E/F1BGX38I0UTQG3E.SQUARE.jpg http://cdn.instructables.com/F1B/GX38/I0UTQG3E/F1BGX38I0UTQG3E.SMALL.jpg john pedersen I found this interesting double knife sheath at a flea market and paid only $3 for it. I decided to replace the flap because of the hole and the black marker initials on it. Materials and tools needed A piece of leather to match the flap (I bought a bag of leather pieces from Michael's) A drill w...
By: john pedersen

Continue Reading »]]>
Sun, 5 Oct 2014 17:58:36 PDT
Tanto Knife http://www.instructables.com/id/Tanto-Knife/
Tanto Knife - More DIY How To Projects]]> http://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SQUARE2.jpg http://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SQUARE.jpg http://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SMALL.jpg mandamados It's my third attempt to make knifes. I use Uddeholm Arne tool steel, 6mm thick. Grinding I used Uddeholm Arne tool steel, 6mm thick. But the knife should be about 4.4 mm thick, so it should be ground. Shape of the knife Cut the blade with an angle grinder Finishing the blade Finish the fin...
By: mandamados

Continue Reading »]]>
Fri, 3 Oct 2014 06:32:00 PDT
Fantastic Knifery http://www.instructables.com/id/Fantastic-Knifery/ http://cdn.instructables.com/FJV/5IXT/HYQDUVF1/FJV5IXTHYQDUVF1.SQUARE2.jpg http://cdn.instructables.com/FJV/5IXT/HYQDUVF1/FJV5IXTHYQDUVF1.SQUARE.jpg http://cdn.instructables.com/FJV/5IXT/HYQDUVF1/FJV5IXTHYQDUVF1.SMALL.jpg The Rambler (Yes, I made that word up.)This collection is all about my favorite knife (or their longer cousin, the sword) builds and the various cases made to house them (i.e. sheaths, scabbards, etc.). Some of them I have included because I just love the final result. Some of them I included because I thought ...
By: The Rambler

Continue Reading »]]>
Fri, 19 Sep 2014 17:08:33 PDT
Knife Handle http://www.instructables.com/id/Knife-Handle/
Knife Handle - More DIY How To Projects]]> http://cdn.instructables.com/FAQ/3OUG/HZQTCW2C/FAQ3OUGHZQTCW2C.SQUARE2.jpg http://cdn.instructables.com/FAQ/3OUG/HZQTCW2C/FAQ3OUGHZQTCW2C.SQUARE.jpg http://cdn.instructables.com/FAQ/3OUG/HZQTCW2C/FAQ3OUGHZQTCW2C.SMALL.jpg hbrearley Got an old knife blade without a handle (this one came from a leatherman), here is a way to make a cheap, simple, wooden knife handle that can be made to fit your hand. Aswell as a blade guard. WHat You Will or May Need: *A length of balsa wood, preferably long and thick enough for your hand and ...
By: hbrearley

Continue Reading »]]>
Sat, 6 Sep 2014 07:04:56 PDT
Make Professional Quality Knives at Home http://www.instructables.com/id/Make-Professional-Quality-Knives-at-Home/
Make Professional Quality Knives at Home - More DIY How To Projects]]> http://cdn.instructables.com/FKH/VLXZ/HZOM52XJ/FKHVLXZHZOM52XJ.SQUARE2.jpg http://cdn.instructables.com/FKH/VLXZ/HZOM52XJ/FKHVLXZHZOM52XJ.SQUARE.jpg http://cdn.instructables.com/FKH/VLXZ/HZOM52XJ/FKHVLXZHZOM52XJ.SMALL.jpg Zaphod Beetlebrox Custom knifes are a staple of most professional cooks and chefs and can range in price from $200-$3000; however, you should be able to complete one knife for about $10 worth of steel and without power tools! I wouldn't say that this is a very difficult project more that it requires a lot of patience...
By: Zaphod Beetlebrox

Continue Reading »]]>
Thu, 4 Sep 2014 17:05:33 PDT
How to make a PVC arrowhead http://www.instructables.com/id/How-to-make-a-PVC-arrowhead/
How to make a PVC arrowhead - More DIY How To Projects]]> http://cdn.instructables.com/F7P/CXG2/HZMJ4WFH/F7PCXG2HZMJ4WFH.SQUARE2.jpg http://cdn.instructables.com/F7P/CXG2/HZMJ4WFH/F7PCXG2HZMJ4WFH.SQUARE.jpg http://cdn.instructables.com/F7P/CXG2/HZMJ4WFH/F7PCXG2HZMJ4WFH.SMALL.jpg ssukhi I did a little tutorial on how to make an arrowhead for either necklaces, decorations, for arrows, and whatever else arrowheads can be used for. Enjoy!!
By: ssukhi

Continue Reading »]]>
Thu, 4 Sep 2014 07:23:52 PDT
Quick Tip #5: Single Mag holder as a Knife or Flashlight Holder http://www.instructables.com/id/Quicktip-Single-Mag-holder-as-a-Knife-or-Flashligh/
Quick Tip #5: Single Mag holder as a Knife or Flashlight Holder - More DIY How To Projects]]> http://cdn.instructables.com/F5K/NNQ6/HZFDW963/F5KNNQ6HZFDW963.SQUARE2.jpg http://cdn.instructables.com/F5K/NNQ6/HZFDW963/F5KNNQ6HZFDW963.SQUARE.jpg http://cdn.instructables.com/F5K/NNQ6/HZFDW963/F5KNNQ6HZFDW963.SMALL.jpg -chase- Hi all,This is more of a quick-tip on re-purposing a Single Magazine Holder for a Knife or Flashlight holder. I wish I could take credit for the discovery but can not, I was turned on to the idea by a neighboring sailboat owner to the one I was working on So thanx goes to Patrick for this one.His st...
By: -chase-

Continue Reading »]]>
Thu, 28 Aug 2014 10:21:58 PDT
Batarang from Scrap Metal http://www.instructables.com/id/Batarang-from-Scrap-Metal/
Batarang from Scrap Metal - More DIY How To Projects]]> http://cdn.instructables.com/FVE/JH80/HZ5DSY74/FVEJH80HZ5DSY74.SQUARE2.jpg http://cdn.instructables.com/FVE/JH80/HZ5DSY74/FVEJH80HZ5DSY74.SQUARE.jpg http://cdn.instructables.com/FVE/JH80/HZ5DSY74/FVEJH80HZ5DSY74.SMALL.jpg bcb10 I had some scrap metal sitting around my dorm last spring, so I decided to make a batarang. It didn't turn out as well as I hoped, so I attempted another over the summer! Here they are! Supplies For this project I used as follows:Tools:ClampsDremelBucket of waterHeat sourceMarker/ PencilParts:Scr...
By: bcb10

Continue Reading »]]>
Fri, 22 Aug 2014 12:47:35 PDT
homemade glow in the dark micarta / G10 http://www.instructables.com/id/homemade-glow-in-the-dark-micarta-G10/
homemade glow in the dark micarta / G10 - More DIY How To Projects]]> http://cdn.instructables.com/FT3/46K8/HZ2IXKHK/FT346K8HZ2IXKHK.SQUARE2.jpg http://cdn.instructables.com/FT3/46K8/HZ2IXKHK/FT346K8HZ2IXKHK.SQUARE.jpg http://cdn.instructables.com/FT3/46K8/HZ2IXKHK/FT346K8HZ2IXKHK.SMALL.jpg Unboxingexperience7 You need2K epoxyglow in the dark powderglass fiber fabricYou can use G10/micarta for knife handles /scales Laminating mix 2k epoxy with glow in the dark powderlaminate glass fiber fabricpress it for 24 hours
By: Unboxingexperience7

Continue Reading »]]>
Wed, 20 Aug 2014 13:59:03 PDT
Lessons of a Knife - making the ultimate bush blade http://www.instructables.com/id/Lessons-of-a-Knife-making-the-ultimate-bush-tool/
Lessons of a Knife - making the ultimate bush blade - More DIY How To Projects]]> http://cdn.instructables.com/FZ2/PK5A/I1C46A40/FZ2PK5AI1C46A40.SQUARE2.jpg http://cdn.instructables.com/FZ2/PK5A/I1C46A40/FZ2PK5AI1C46A40.SQUARE.jpg http://cdn.instructables.com/FZ2/PK5A/I1C46A40/FZ2PK5AI1C46A40.SMALL.jpg bricobart "Which knife is best?"Every adventurer, trekker, hunter, survivalist or geek gets sooner or later faced with that one, simple, haunting question: "Which knife is best?"Believe it or not, but those four words chased me for many, many years. In the beginning, when I was a kid, I suffered in silence, t...
By: bricobart

Continue Reading »]]>
Wed, 20 Aug 2014 03:09:38 PDT
Quick and Dirty Shuriken (Throwing Star) http://www.instructables.com/id/Quick-and-Dirty-Shuriken-Throwing-Star/
Quick and Dirty Shuriken (Throwing Star) - More DIY How To Projects]]> http://cdn.instructables.com/F8T/HVYQ/HZ13EPNE/F8THVYQHZ13EPNE.SQUARE2.jpg http://cdn.instructables.com/F8T/HVYQ/HZ13EPNE/F8THVYQHZ13EPNE.SQUARE.jpg http://cdn.instructables.com/F8T/HVYQ/HZ13EPNE/F8THVYQHZ13EPNE.SMALL.jpg BikeHacker Are you tired of watching Ninja Turtles and want to do some nija-ing yourself? This project is for you!***DISCLAIMER:***This is a sharp, dangerous object. Handle with extreme caution and only throw at a throwing target.I am not responsible for any injuries caused by this weapon.Use at your own risk!...
By: BikeHacker

Continue Reading »]]>
Sun, 17 Aug 2014 08:36:24 PDT
How to make a 9mm para bullet lock bar stabilizer http://www.instructables.com/id/How-to-make-a-9mm-para-bullet-lock-bar-stabilizer/
How to make a 9mm para bullet lock bar stabilizer - More DIY How To Projects]]> http://cdn.instructables.com/FJP/28KK/HYQDWEFK/FJP28KKHYQDWEFK.SQUARE2.jpg http://cdn.instructables.com/FJP/28KK/HYQDWEFK/FJP28KKHYQDWEFK.SQUARE.jpg http://cdn.instructables.com/FJP/28KK/HYQDWEFK/FJP28KKHYQDWEFK.SMALL.jpg Unboxingexperience7 All you need isa knife with lock bar stabilizer (e.g. Strider SNG)an empty 9mm bullet shella drilla hacksaw Cut and drill the empty bullet shell cut the bullet shell (use a hacksaw)drill a hole in the middle of the shell bottomreplace the original lock bar stabilizer
By: Unboxingexperience7

Continue Reading »]]>
Tue, 12 Aug 2014 11:21:29 PDT
How to Make Bo Shurikens/Throwing Spikes http://www.instructables.com/id/How-to-Make-Bo-ShurikensThrowing-Spikes-1/
How to Make Bo Shurikens/Throwing Spikes - More DIY How To Projects]]> http://cdn.instructables.com/FLC/21ZT/HYR3CGFI/FLC21ZTHYR3CGFI.SQUARE2.jpg http://cdn.instructables.com/FLC/21ZT/HYR3CGFI/FLC21ZTHYR3CGFI.SQUARE.jpg http://cdn.instructables.com/FLC/21ZT/HYR3CGFI/FLC21ZTHYR3CGFI.SMALL.jpg Luke_Indestructible There are many instructables and guides for making Bo Shurikens, or what is known more commonly to Westerners as Throwing Spikes. This is my first instructable ever so this is more for my education than anything else. So constructive criticism, ideas, and your input are all welcome, just b...
By: Luke_Indestructible

Continue Reading »]]>
Tue, 12 Aug 2014 10:56:48 PDT
How to make a golden knife http://www.instructables.com/id/How-to-make-a-golden-knife/
How to make a golden knife - More DIY How To Projects]]> http://cdn.instructables.com/FJH/G7P3/HYQDW2WT/FJHG7P3HYQDW2WT.SQUARE2.jpg http://cdn.instructables.com/FJH/G7P3/HYQDW2WT/FJHG7P3HYQDW2WT.SQUARE.jpg http://cdn.instructables.com/FJH/G7P3/HYQDW2WT/FJHG7P3HYQDW2WT.SMALL.jpg Unboxingexperience7 It's a simple electroplating process. You needa carbon steel knifegold electrolyteelectroplating set (or 2x AA batteries, wires and a metal rod with a sponge on top) Electroplating the knife connect a wire from the metal rod with sponge to + of the 2AA batteriesconnect a wire from the knife to - ...
By: Unboxingexperience7

Continue Reading »]]>
Tue, 12 Aug 2014 10:24:48 PDT