Instructables: exploring - outside - water http://www.instructables.com Fri, 18 Apr 2014 19:57:03 PDT BLOX v1.01 The Allen Hydrautomat, a working paint tin model. http://www.instructables.com/id/The-Allen-Hydrautomat-a-working-paint-tin-model/
The Allen Hydrautomat, a working paint tin model. - More DIY How To Projects]]> http://cdn.instructables.com/F6Y/VQIX/HU1RWH21/F6YVQIXHU1RWH21.SQUARE2.jpg http://cdn.instructables.com/F6Y/VQIX/HU1RWH21/F6YVQIXHU1RWH21.SQUARE.jpg http://cdn.instructables.com/F6Y/VQIX/HU1RWH21/F6YVQIXHU1RWH21.SMALL.jpg petercd A silent system of raising water patented in 1926 by Thomas Gaskell Allen, was alleged to have an efficiency of 80% of the pressure water used, a more efficient device than the hydraulic ram pump at the cost of greater parts and complexity.Sadly, this wonderful device seems to have faded into obscur...
By: petercd

Continue Reading »]]>
Wed, 16 Apr 2014 12:48:37 PDT
Waterproofing http://www.instructables.com/id/Waterproofing/ http://cdn.instructables.com/FCS/S1L1/HTUFD1AC/FCSS1L1HTUFD1AC.SQUARE2.jpg http://cdn.instructables.com/FCS/S1L1/HTUFD1AC/FCSS1L1HTUFD1AC.SQUARE.jpg http://cdn.instructables.com/FCS/S1L1/HTUFD1AC/FCSS1L1HTUFD1AC.SMALL.jpg pucksurfer Various waterproofing tricks that could help you with you life. Can be used to make parts for bigger mechanisms, acssesories for devices, and much more. null null null null null null null null null null null null null null null null n...
By: pucksurfer

Continue Reading »]]>
Thu, 10 Apr 2014 17:37:30 PDT
pond filter from scrap http://www.instructables.com/id/pond-filter-from-scrap/ http://cdn.instructables.com/FQ6/EBGW/HTLE18BF/FQ6EBGWHTLE18BF.SQUARE2.jpg http://cdn.instructables.com/FQ6/EBGW/HTLE18BF/FQ6EBGWHTLE18BF.SQUARE.jpg http://cdn.instructables.com/FQ6/EBGW/HTLE18BF/FQ6EBGWHTLE18BF.SMALL.jpg stormke my first instructable. i've made a smal pond filtering system from scrap. Using a toxic waste inviromentbox that are in a lot of Belgium peoples houses without any use. I only have to buy a filter an some connections. The choice i made was because this box is very strong en initiate resistant agains...
By: stormke

Continue Reading »]]>
Fri, 4 Apr 2014 04:48:10 PDT
STAND-ALONE RAINWATER COLLECTOR http://www.instructables.com/id/Stand-alone-rain-collector/
STAND-ALONE RAINWATER COLLECTOR - More DIY How To Projects]]> http://cdn.instructables.com/FOL/OSWF/HTK2G7DN/FOLOSWFHTK2G7DN.SQUARE2.jpg http://cdn.instructables.com/FOL/OSWF/HTK2G7DN/FOLOSWFHTK2G7DN.SQUARE.jpg http://cdn.instructables.com/FOL/OSWF/HTK2G7DN/FOLOSWFHTK2G7DN.SMALL.jpg ElizabethGoetvinck We are students industrial design and for the past 2 weeks we have been building a rain harvesting system. Our client is a community with a public garden because they don't have a private garden for themselves. The garden is a place where they can cultivate some vegetables and fruits, relax, enjoy t...
By: ElizabethGoetvinck

Continue Reading »]]>
Thu, 3 Apr 2014 13:30:55 PDT
How To Make Your Own Goof Board http://www.instructables.com/id/How-To-Make-Your-Own-Goof-Board/ http://cdn.instructables.com/FZV/CW49/HTEUDY26/FZVCW49HTEUDY26.SQUARE2.jpg http://cdn.instructables.com/FZV/CW49/HTEUDY26/FZVCW49HTEUDY26.SQUARE.jpg http://cdn.instructables.com/FZV/CW49/HTEUDY26/FZVCW49HTEUDY26.SMALL.jpg HowToLou If you are planning on trying flowboarding for your first time, this is a way you can practice on dry land.  These have many names, like Goof, Balance, and Indo Boards.
By: HowToLou

Continue Reading »]]>
Sun, 30 Mar 2014 17:29:16 PDT
Amazing recycled water bottle sprinkler. http://www.instructables.com/id/Amazing-recycled-water-bottle-sprinkler/
Amazing recycled water bottle sprinkler. - More DIY How To Projects]]> http://cdn.instructables.com/FP6/TU64/HT73M00H/FP6TU64HT73M00H.SQUARE2.jpg http://cdn.instructables.com/FP6/TU64/HT73M00H/FP6TU64HT73M00H.SQUARE.jpg http://cdn.instructables.com/FP6/TU64/HT73M00H/FP6TU64HT73M00H.SMALL.jpg Smelly2190 You will need: A water bottle A marker Parcel tape A hosepipe Draw holes on the bottle Around the lower edge of the bottle, draw dots in any order. Pierce holes pierce holes on the dots using a needle/a pin Almost done... Now...
By: Smelly2190

Continue Reading »]]>
Tue, 25 Mar 2014 12:58:31 PDT
An Improved Simple Hydraulic Ram Pump http://www.instructables.com/id/An-Improved-Simple-Hydraulic-Ram-Pump/
An Improved Simple Hydraulic Ram Pump - More DIY How To Projects]]> http://cdn.instructables.com/F7X/QMVX/HT36T4JN/F7XQMVXHT36T4JN.SQUARE2.jpg http://cdn.instructables.com/F7X/QMVX/HT36T4JN/F7XQMVXHT36T4JN.SQUARE.jpg http://cdn.instructables.com/F7X/QMVX/HT36T4JN/F7XQMVXHT36T4JN.SMALL.jpg petercd Based largely on the BreurRam pump developed by Gert Breur, my version features an alternate component layout. The simplicity of the original design is due to incorporating the air reservoir, which absorbs the hydraulic shock, into the outlet tubing, with only 2 check valves being used, one of which...
By: petercd

Continue Reading »]]>
Sat, 22 Mar 2014 16:56:00 PDT
Hollow wooden kitesurfboard http://www.instructables.com/id/Hollow-wooden-kitesurfboard/
Hollow wooden kitesurfboard - More DIY How To Projects]]> http://cdn.instructables.com/FVY/MPRI/HS61AQ0L/FVYMPRIHS61AQ0L.SQUARE2.jpg http://cdn.instructables.com/FVY/MPRI/HS61AQ0L/FVYMPRIHS61AQ0L.SQUARE.jpg http://cdn.instructables.com/FVY/MPRI/HS61AQ0L/FVYMPRIHS61AQ0L.SMALL.jpg fjordfiend This is how to make a hollow wooden kiteboard from marine plywood. The design and construction of this board has been simplified as much as possible to facilitate quick, cheap construction with out specialised tools. The board consists of three layers of wood laminated together to form the core ...
By: fjordfiend

Continue Reading »]]>
Thu, 27 Feb 2014 20:08:32 PST
Atmospheric Water Generator With Water Purifier and Remineralization http://www.instructables.com/id/Atmospheric-Water-Generator-With-Water-Purifier-an/
Atmospheric Water Generator With Water Purifier and Remineralization - More DIY How To Projects]]> http://cdn.instructables.com/F00/UAT2/HS18I5UB/F00UAT2HS18I5UB.SQUARE2.jpg http://cdn.instructables.com/F00/UAT2/HS18I5UB/F00UAT2HS18I5UB.SQUARE.jpg http://cdn.instructables.com/F00/UAT2/HS18I5UB/F00UAT2HS18I5UB.SMALL.jpg haeshproject Atmospheric water generators (AWG), are a devices that extract water from humid ambient air. Water vapor in the air is condensed by cooling the air below its dew point. Unlike a dehumidifier, an AWG is designed to render the water safe to drink. AWGs are useful where pure drinking water is difficu...
By: haeshproject

Continue Reading »]]>
Wed, 26 Feb 2014 17:10:44 PST
PVC Water Pump http://www.instructables.com/id/PVC-Water-Pump/
PVC Water Pump - More DIY How To Projects]]> http://cdn.instructables.com/FLO/8M6G/HRWNB22J/FLO8M6GHRWNB22J.SQUARE2.jpg http://cdn.instructables.com/FLO/8M6G/HRWNB22J/FLO8M6GHRWNB22J.SQUARE.jpg http://cdn.instructables.com/FLO/8M6G/HRWNB22J/FLO8M6GHRWNB22J.SMALL.jpg petercd Build a long reach pvc water pump, handy for pumping right down to the bottom, and easily transfer water between rain barrels without resorting to the small plastic 5 litre paint buckets that fit the opening. I had hoped that this small scale pumping windmill copy would start siphoning once I pu...
By: petercd

Continue Reading »]]>
Fri, 21 Feb 2014 11:44:18 PST
Earth Day Crafts http://www.instructables.com/id/Earth-Day-Crafts/ http://cdn.instructables.com/FET/ASKX/HRPBNNFQ/FETASKXHRPBNNFQ.SQUARE2.jpg http://cdn.instructables.com/FET/ASKX/HRPBNNFQ/FETASKXHRPBNNFQ.SQUARE.jpg http://cdn.instructables.com/FET/ASKX/HRPBNNFQ/FETASKXHRPBNNFQ.SMALL.jpg Rachmaninoffing Crafts selected for the Lyndon State College Earth Day Festivals. null null null null null
By: Rachmaninoffing

Continue Reading »]]>
Tue, 18 Feb 2014 10:01:48 PST
Kayak repair http://www.instructables.com/id/Kayak-repair/ http://cdn.instructables.com/F3O/SRDW/HRI96Z15/F3OSRDWHRI96Z15.SQUARE2.jpg http://cdn.instructables.com/F3O/SRDW/HRI96Z15/F3OSRDWHRI96Z15.SQUARE.jpg http://cdn.instructables.com/F3O/SRDW/HRI96Z15/F3OSRDWHRI96Z15.SMALL.jpg Yakdoc Not so much an instructable as showing you that even severe damage on a kayak in the right hands can be repaired.  This kayak has a badly melted bow after it became loose on the roof of a bus, after cutting out the damaged hull material a large hole was left that needed patching. A patch was made f...
By: Yakdoc

Continue Reading »]]>
Wed, 12 Feb 2014 22:37:36 PST
ANICE stool http://www.instructables.com/id/ANICE-stool/ http://cdn.instructables.com/FER/DW5H/HRI96A1U/FERDW5HHRI96A1U.SQUARE2.jpg http://cdn.instructables.com/FER/DW5H/HRI96A1U/FERDW5HHRI96A1U.SQUARE.jpg http://cdn.instructables.com/FER/DW5H/HRI96A1U/FERDW5HHRI96A1U.SMALL.jpg Tart2000 To make it: download the openscad files from my Thingiverse account set your own parameters and generate the stl 3D print the core add the wooden legs put in a bucket with some water put it outside wait (about 32 hours) tada! Let me know if it works or if you ...
By: Tart2000

Continue Reading »]]>
Mon, 10 Feb 2014 13:55:02 PST
How To Build a Flowrider http://www.instructables.com/id/How-To-Build-a-Flowrider/ http://cdn.instructables.com/F8Z/ZVGV/HR4SR99J/F8ZZVGVHR4SR99J.SQUARE2.jpg http://cdn.instructables.com/F8Z/ZVGV/HR4SR99J/F8ZZVGVHR4SR99J.SQUARE.jpg http://cdn.instructables.com/F8Z/ZVGV/HR4SR99J/F8ZZVGVHR4SR99J.SMALL.jpg HowToLou I will probably never do it, but it would be possible to build your own flowrider.
By: HowToLou

Continue Reading »]]>
Sat, 1 Feb 2014 20:52:17 PST
Surfboard Lamination http://www.instructables.com/id/Surfboard-Lamination/
Surfboard Lamination - More DIY How To Projects]]> http://cdn.instructables.com/FQ8/SSR0/HQDUSWUC/FQ8SSR0HQDUSWUC.SQUARE2.jpg http://cdn.instructables.com/FQ8/SSR0/HQDUSWUC/FQ8SSR0HQDUSWUC.SQUARE.jpg http://cdn.instructables.com/FQ8/SSR0/HQDUSWUC/FQ8SSR0HQDUSWUC.SMALL.jpg Matticus Finch I moved out to Long Island for work and bought a surfboard. After a season of riding it into dunes and what-have-you, the tail snapped. Over the following winter I restored the surfboard to its former glory. I have no experience with laminates and prior to this season had never surfed a day in my li...
By: Matticus Finch

Continue Reading »]]>
Tue, 14 Jan 2014 11:35:08 PST
Ram Pump http://www.instructables.com/id/Ram-Pump/ http://cdn.instructables.com/F58/72JO/HQ0T58ZA/F5872JOHQ0T58ZA.SQUARE2.jpg http://cdn.instructables.com/F58/72JO/HQ0T58ZA/F5872JOHQ0T58ZA.SQUARE.jpg http://cdn.instructables.com/F58/72JO/HQ0T58ZA/F5872JOHQ0T58ZA.SMALL.jpg bigbill101 Well I've always wanted to check out how these pumps work, so I brought up your website, and now I have one.  I now can't wait for the snow to melt so I can install it at my pond.  I followed your directions and substituted brass spring check and flapper valves.  I made a base out of some stainless ...
By: bigbill101

Continue Reading »]]>
Sat, 4 Jan 2014 09:39:53 PST
Outdoor Shower http://www.instructables.com/id/Outdoor-Shower-1/
Outdoor Shower - More DIY How To Projects]]> http://cdn.instructables.com/FTU/QPGR/HPQOA7OY/FTUQPGRHPQOA7OY.SQUARE2.jpg http://cdn.instructables.com/FTU/QPGR/HPQOA7OY/FTUQPGRHPQOA7OY.SQUARE.jpg http://cdn.instructables.com/FTU/QPGR/HPQOA7OY/FTUQPGRHPQOA7OY.SMALL.jpg 64Anthonyp I had a treated pine post with a wind vane on top of it. Only problem was that it was overgrown by some bushes and could no longer tell me the wind direction. I also had an old 13mm garden hose that I had replaced ages ago because it was too short. I live in a seaside city that's hot in Summer. Some...
By: 64Anthonyp

Continue Reading »]]>
Sun, 29 Dec 2013 01:25:27 PST
camera and ipod Waterproof condon http://www.instructables.com/id/camera-and-ipod-Waterproof-condon/
camera and ipod Waterproof condon - More DIY How To Projects]]> http://cdn.instructables.com/FAD/IBNV/HPFZY0CT/FADIBNVHPFZY0CT.SQUARE2.jpg http://cdn.instructables.com/FAD/IBNV/HPFZY0CT/FADIBNVHPFZY0CT.SQUARE.jpg http://cdn.instructables.com/FAD/IBNV/HPFZY0CT/FADIBNVHPFZY0CT.SMALL.jpg olmanorozco an easy way to protect your ipod, iphone, camera from water. a condom a camera or ipod or iphone for the camera do not forget the knot
By: olmanorozco

Continue Reading »]]>
Fri, 20 Dec 2013 17:53:36 PST
How to make glowing water http://www.instructables.com/id/How-to-make-glowing-water/
How to make glowing water - More DIY How To Projects]]> http://cdn.instructables.com/FSS/X0MA/HPCLIJ5H/FSSX0MAHPCLIJ5H.SQUARE2.jpg http://cdn.instructables.com/FSS/X0MA/HPCLIJ5H/FSSX0MAHPCLIJ5H.SQUARE.jpg http://cdn.instructables.com/FSS/X0MA/HPCLIJ5H/FSSX0MAHPCLIJ5H.SMALL.jpg wingxmichael Here are the steps taken to make glowing water. You will need a beaker, gloves, pipette, eye protection, a mix stick, glow stick, water, and some dish soap (written version) Step 1 Take your glow stick and cut off one end, be careful of the glass inside. Step 2 Cut open the other end of the tu...
By: wingxmichael

Continue Reading »]]>
Wed, 18 Dec 2013 08:16:23 PST
Instant Ice (Gel) http://www.instructables.com/id/Supplies-5/
Instant Ice (Gel) - More DIY How To Projects]]> http://cdn.instructables.com/FQB/9HL5/HPBS1MZ7/FQB9HL5HPBS1MZ7.SQUARE2.jpg http://cdn.instructables.com/FQB/9HL5/HPBS1MZ7/FQB9HL5HPBS1MZ7.SQUARE.jpg http://cdn.instructables.com/FQB/9HL5/HPBS1MZ7/FQB9HL5HPBS1MZ7.SMALL.jpg chantell_burrell Materials: Sodium Polyacrylate Water Small Bowl (or Beaker) Any Food Coloring Getting Started Get out all you supplies and lay them out on the table neatly. The Sodium Polyacrylate Pour the desired amount of sodium polyacrylate into your small bowl (or beaker). Water and Food Coloring Pour ...
By: chantell_burrell

Continue Reading »]]>
Tue, 17 Dec 2013 19:00:54 PST
Smart Sheet Invention for Water Rides http://www.instructables.com/id/Smart-Sheet-Invention-for-Water-Rides/ http://cdn.instructables.com/F2X/7DM0/HP8OKWFW/F2X7DM0HP8OKWFW.SQUARE2.jpg http://cdn.instructables.com/F2X/7DM0/HP8OKWFW/F2X7DM0HP8OKWFW.SQUARE.jpg http://cdn.instructables.com/F2X/7DM0/HP8OKWFW/F2X7DM0HP8OKWFW.SMALL.jpg HowToLou I am a mechanical engineer, inventor, and an avid flowboarder.  I have just patented this invention that could cut the operating costs of sheet waves, in half.  If you would like to know how to patent something, check out my "How To Patent an Invention" Instructable.
By: HowToLou

Continue Reading »]]>
Sun, 15 Dec 2013 12:08:32 PST
Submarine! underwater R.O.V http://www.instructables.com/id/Submarine-underwater-ROV/
Submarine! underwater R.O.V - More DIY How To Projects]]> http://cdn.instructables.com/FN5/KH8U/HOHY82ER/FN5KH8UHOHY82ER.SQUARE2.jpg http://cdn.instructables.com/FN5/KH8U/HOHY82ER/FN5KH8UHOHY82ER.SQUARE.jpg http://cdn.instructables.com/FN5/KH8U/HOHY82ER/FN5KH8UHOHY82ER.SMALL.jpg billstar414 (This can be seen in the Melbourne museum from the 21st of March to the 13th of July, as it has been accepted into top designs 2014!) The underwater remote operated vehicle or R.O.V is a submarine that drives around underwater and is controlled from above water, this also has a camera mounted on the...
By: billstar414

Continue Reading »]]>
Sun, 1 Dec 2013 00:28:09 PST
Bodysurf handplane http://www.instructables.com/id/Bodysurf-handplane/
Bodysurf handplane - More DIY How To Projects]]> http://cdn.instructables.com/F2G/W5S4/HOKSBY8Z/F2GW5S4HOKSBY8Z.SQUARE2.jpg http://cdn.instructables.com/F2G/W5S4/HOKSBY8Z/F2GW5S4HOKSBY8Z.SQUARE.jpg http://cdn.instructables.com/F2G/W5S4/HOKSBY8Z/F2GW5S4HOKSBY8Z.SMALL.jpg fjordfiend Make a bodysurf handplane from timber offcuts.A handplane is used to create more planning area when body surfing, easier wave entry and more down the line speed.Small enough to leave in the car or travel in hand luggage, makes the most of all conditions and surf opportunities. Draw up your templat...
By: fjordfiend

Continue Reading »]]>
Thu, 28 Nov 2013 20:17:49 PST
natural heating source for aquaponics http://www.instructables.com/id/natural-heating-source-for-aquaponics/ http://cdn.instructables.com/FQO/4521/HO7XJ3LF/FQO4521HO7XJ3LF.SQUARE2.jpg http://cdn.instructables.com/FQO/4521/HO7XJ3LF/FQO4521HO7XJ3LF.SQUARE.jpg http://cdn.instructables.com/FQO/4521/HO7XJ3LF/FQO4521HO7XJ3LF.SMALL.jpg mnewtonsr I am tired of all the recalls on the food we eat and all the chemicals that are allowed in and on the things we eat. This project is to try raising my own fish and vegetables during winter.  It is a work in progress. I have changed things a few times already, the newest experiment is a natural heati...
By: mnewtonsr

Continue Reading »]]>
Tue, 26 Nov 2013 15:14:52 PST
How to draw a tropical beach on Deviant Art Muro http://www.instructables.com/id/How-to-draw-a-tropical-beach-on-Deviant-Art-Muro/
How to draw a tropical beach on Deviant Art Muro - More DIY How To Projects]]> http://cdn.instructables.com/FTY/8XS7/HO233I2T/FTY8XS7HO233I2T.SQUARE2.jpg http://cdn.instructables.com/FTY/8XS7/HO233I2T/FTY8XS7HO233I2T.SQUARE.jpg http://cdn.instructables.com/FTY/8XS7/HO233I2T/FTY8XS7HO233I2T.SMALL.jpg CACO_Zach This Instructable is on how to draw a tropical beach in Deviant Art. I hope you find this helpful! Let's start with the sand! (Step 1) Start by using the regular brush and making the beach any size you want. Add the water! (Step 2) Using the same tool, but maybe a different size, add the ocean...
By: CACO_Zach

Continue Reading »]]>
Tue, 19 Nov 2013 12:44:48 PST
Build a floating dock using mini beer kegs http://www.instructables.com/id/Build-a-floating-dock-using-mini-beer-kegs/ http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SQUARE2.jpg http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SQUARE.jpg http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SMALL.jpg staceyhare We built a dock using 5L Heineken mini beer kegs. Check it out. 
By: staceyhare

Continue Reading »]]>
Sun, 17 Nov 2013 15:22:34 PST
Build a dock using Heineken Kegs http://www.instructables.com/id/Outdoor-Bottle-Wall/ http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SQUARE2.jpg http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SQUARE.jpg http://cdn.instructables.com/F0H/4STQ/HO233ON0/F0H4STQHO233ON0.SMALL.jpg staceyhare Watch the video showing how to make a dock using empty Heineken 5L mini kegs http://www.youtube.com/watch?v=IYVi61W2ccg
By: staceyhare

Continue Reading »]]>
Sun, 17 Nov 2013 15:04:45 PST
Hydration Pack - Bite Valve Cover http://www.instructables.com/id/Hydration-Pack-Bite-Valve-Cover/
Hydration Pack - Bite Valve Cover - More DIY How To Projects]]> http://cdn.instructables.com/FKN/6XIQ/HNQYA2WO/FKN6XIQHNQYA2WO.SQUARE2.jpg http://cdn.instructables.com/FKN/6XIQ/HNQYA2WO/FKN6XIQHNQYA2WO.SQUARE.jpg http://cdn.instructables.com/FKN/6XIQ/HNQYA2WO/FKN6XIQHNQYA2WO.SMALL.jpg Kyrocken This a handy use for a 35mm film canister if you are need of a cover for your hydration pack's bite valve. Do you throw your backpack down during a midday break, just to have it covered with dirt, cow feces or an army of ants? Well fear no more friend. A FREE solution has just come your way. Your d...
By: Kyrocken

Continue Reading »]]>
Fri, 8 Nov 2013 11:15:18 PST
How to make emergency arm bands! http://www.instructables.com/id/How-to-make-emergency-arm-bands/ http://cdn.instructables.com/FYS/CGG8/HN829QO6/FYSCGG8HN829QO6.SQUARE2.jpg http://cdn.instructables.com/FYS/CGG8/HN829QO6/FYSCGG8HN829QO6.SQUARE.jpg http://cdn.instructables.com/FYS/CGG8/HN829QO6/FYSCGG8HN829QO6.SMALL.jpg Assassin Tube This is a good trick, depending on the weight of your child will depend on how many balloons you need. I hope you guys stay safe :)
By: Assassin Tube

Continue Reading »]]>
Mon, 28 Oct 2013 02:36:39 PDT
SIMPLE valve for vacuum water lift from positive air pressure Venturi homemade valve http://www.instructables.com/id/SIMPLE-valve-for-vacuum-water-lift-from-positive-a/ http://cdn.instructables.com/FAA/7OVB/HN82H2N2/FAA7OVBHN82H2N2.SQUARE2.jpg http://cdn.instructables.com/FAA/7OVB/HN82H2N2/FAA7OVBHN82H2N2.SQUARE.jpg http://cdn.instructables.com/FAA/7OVB/HN82H2N2/FAA7OVBHN82H2N2.SMALL.jpg GREENPOWERSCIENCE This is the simplest project you can do. The valve allows for positive high velocity currents to draw a vacuum. Future configurations of this valve will transfer mud and heavy sediments, increase the mix volumes of water basins, draw air deep into a body of water for aeration, rapidly ventilate larg...
By: GREENPOWERSCIENCE

Continue Reading »]]>
Sat, 26 Oct 2013 19:53:07 PDT
Monowheel Submarine http://www.instructables.com/id/Monowheel-Submarine/
Monowheel Submarine - More DIY How To Projects]]> http://cdn.instructables.com/FCR/D7RL/HMVJCH9H/FCRD7RLHMVJCH9H.SQUARE2.jpg http://cdn.instructables.com/FCR/D7RL/HMVJCH9H/FCRD7RLHMVJCH9H.SQUARE.jpg http://cdn.instructables.com/FCR/D7RL/HMVJCH9H/FCRD7RLHMVJCH9H.SMALL.jpg nathan nash Hello, and welcome to what may be the mode of transport of the future. The possible mode of transport of the future is the amphibious, single wheeled, pedal powdered, submarine.  And below is a 3d model of it made in 123d design desktop, available to download here- http://www.123dapp.com/design . No...
By: nathan nash

Continue Reading »]]>
Sat, 19 Oct 2013 17:05:56 PDT
How To Make a Flowboard - Part 2 http://www.instructables.com/id/How-To-Make-a-Flowboard-Part-2/ http://cdn.instructables.com/FPC/FXDJ/HMMF1CXV/FPCFXDJHMMF1CXV.SQUARE2.jpg http://cdn.instructables.com/FPC/FXDJ/HMMF1CXV/FPCFXDJHMMF1CXV.SQUARE.jpg http://cdn.instructables.com/FPC/FXDJ/HMMF1CXV/FPCFXDJHMMF1CXV.SMALL.jpg HowToLou This is a follow up to my first video on how to make a flowboard.  Here I add an $8 foam top for traction. These flow boards cost $250 to $400 at http://www.waveloch.com/2011-flowboard-brochure.  I made my own for under $50, including this foam top.  
By: HowToLou

Continue Reading »]]>
Tue, 15 Oct 2013 05:38:56 PDT
Salt Water + Battery = Hydrogen http://www.instructables.com/id/Salt-Water-Battery-Hydrogen/ http://cdn.instructables.com/F6Z/7V9T/HMVJ8TKO/F6Z7V9THMVJ8TKO.SQUARE2.jpg http://cdn.instructables.com/F6Z/7V9T/HMVJ8TKO/F6Z7V9THMVJ8TKO.SQUARE.jpg http://cdn.instructables.com/F6Z/7V9T/HMVJ8TKO/F6Z7V9THMVJ8TKO.SMALL.jpg ajensen19 Materials: cup, water, battery, salt Procedure: 1. Take the salt, pour it into the water and mix the two together. 2. Drop the battery into the water and watch the hydrogen pour out.
By: ajensen19

Continue Reading »]]>
Mon, 14 Oct 2013 19:04:03 PDT
How To Do 360s on the Flowrider http://www.instructables.com/id/How-To-Do-360s-on-the-Flowrider/ http://cdn.instructables.com/FDO/RPRG/HM8D86VM/FDORPRGHM8D86VM.SQUARE2.jpg http://cdn.instructables.com/FDO/RPRG/HM8D86VM/FDORPRGHM8D86VM.SQUARE.jpg http://cdn.instructables.com/FDO/RPRG/HM8D86VM/FDORPRGHM8D86VM.SMALL.jpg HowToLou How To Do 360s on the Flowrider
By: HowToLou

Continue Reading »]]>
Tue, 1 Oct 2013 19:33:53 PDT
Canoe 100 Meter Buoy System http://www.instructables.com/id/Canoe-100-Meter-Buoy-System/
Canoe 100 Meter Buoy System - More DIY How To Projects]]> http://cdn.instructables.com/F5A/AA0F/HLZRUEVU/F5AAA0FHLZRUEVU.SQUARE2.jpg http://cdn.instructables.com/F5A/AA0F/HLZRUEVU/F5AAA0FHLZRUEVU.SQUARE.jpg http://cdn.instructables.com/F5A/AA0F/HLZRUEVU/F5AAA0FHLZRUEVU.SMALL.jpg LeftyCyclone Have you ever felt like improving your swimming or rowing skills but do not have anything to measure off distances?  Well no need to worry; I’ve got the solution for you! The concrete filled milk jug buoy system, as seen above, is a moderately difficult do-it-yourself contraption to create.  The co...
By: LeftyCyclone

Continue Reading »]]>
Thu, 26 Sep 2013 11:22:28 PDT
How To Make a Flowboard http://www.instructables.com/id/How-To-Make-a-Flowboard/ http://cdn.instructables.com/FTQ/GEGT/HLZRIEAE/FTQGEGTHLZRIEAE.SQUARE2.jpg http://cdn.instructables.com/FTQ/GEGT/HLZRIEAE/FTQGEGTHLZRIEAE.SQUARE.jpg http://cdn.instructables.com/FTQ/GEGT/HLZRIEAE/FTQGEGTHLZRIEAE.SMALL.jpg HowToLou My two favorite hobbies are building stuff and Flowriding.  This project combines the two.  I ride on boards that cost $224.  I made this for $40. Retail flowboards: http://www.waveloch.com/sites/default/files/BoardCatalog-12-Retail.pdf
By: HowToLou

Continue Reading »]]>
Thu, 26 Sep 2013 05:57:19 PDT
Simple water level detector using a LM555 in astable mode: http://www.instructables.com/id/Simple-water-level-detector-using-a-LM555-in-astab/
Simple water level detector using a LM555 in astable mode: - More DIY How To Projects]]> http://cdn.instructables.com/F21/9ZO8/HLY7FDBB/F219ZO8HLY7FDBB.SQUARE2.jpg http://cdn.instructables.com/F21/9ZO8/HLY7FDBB/F219ZO8HLY7FDBB.SQUARE.jpg http://cdn.instructables.com/F21/9ZO8/HLY7FDBB/F219ZO8HLY7FDBB.SMALL.jpg OpenL4BNorte _ Hackerspace Materials: One LM555 Two 330 Ohms resistors One red LED One green LED One 10 nF capacitor One 100 uF capacitor One 1 KOhms resistor One 100 Ohms resistor Wires for connections Protoboard 9 volts battery 9 volts battery connector Cutting pliers ...
By: OpenL4BNorte _ Hackerspace

Continue Reading »]]>
Mon, 23 Sep 2013 22:10:26 PDT
Building a Wakeskate - Parts & Tools http://www.instructables.com/id/Building-a-Wakeskate-Parts-Tools/
Building a Wakeskate - Parts & Tools - More DIY How To Projects]]> http://cdn.instructables.com/FFD/DI0X/HLSHIZGH/FFDDI0XHLSHIZGH.SQUARE2.jpg http://cdn.instructables.com/FFD/DI0X/HLSHIZGH/FFDDI0XHLSHIZGH.SQUARE.jpg http://cdn.instructables.com/FFD/DI0X/HLSHIZGH/FFDDI0XHLSHIZGH.SMALL.jpg kvods Basically the process starts by making a jig (to form the rocker shape) and then you use the jig to build the board.  PARTS: 2 x 4 lumber (for the jig) Cheap 1/8" plywood/ particle board (for the jig) 1/8" sheets of fine woods (for the board) - I used 4 [2' x 4'] sheets of 1/8" birch and 1 [2' x 4...
By: kvods

Continue Reading »]]>
Mon, 23 Sep 2013 11:03:13 PDT
How to catch fish by bottle http://www.instructables.com/id/How-to-catch-fishes-by-bottle/
How to catch fish by bottle - More DIY How To Projects]]> http://cdn.instructables.com/F7I/16LY/HLJVDZ3F/F7I16LYHLJVDZ3F.SQUARE2.jpg http://cdn.instructables.com/F7I/16LY/HLJVDZ3F/F7I16LYHLJVDZ3F.SQUARE.jpg http://cdn.instructables.com/F7I/16LY/HLJVDZ3F/F7I16LYHLJVDZ3F.SMALL.jpg Cworkshop how to catch fish. using bottle it take about 5 minutes to catch from 5 to 15 fish if you are lucky you could found big one all i throw all i got due to not to die                                                                                  ------------------------------ tools you need knife! wa...
By: Cworkshop

Continue Reading »]]>
Wed, 18 Sep 2013 08:42:04 PDT
Homemade Wakeskate http://www.instructables.com/id/Homemade-Wakeskate/
Homemade Wakeskate - More DIY How To Projects]]> http://cdn.instructables.com/FWB/NK1N/HLOC7QBI/FWBNK1NHLOC7QBI.SQUARE2.jpg http://cdn.instructables.com/FWB/NK1N/HLOC7QBI/FWBNK1NHLOC7QBI.SQUARE.jpg http://cdn.instructables.com/FWB/NK1N/HLOC7QBI/FWBNK1NHLOC7QBI.SMALL.jpg Rockitalk This Step-By-Step Instructable will guide you through the process of making your own custom wakeskate using the Roarockit Skateboard Company's Thin Air Press vacuum bag system.  A wakeskate is basically a smaller wakeboard without the bindings. It is gripped just like a skateboard (sometimes with a...
By: Rockitalk

Continue Reading »]]>
Tue, 17 Sep 2013 13:16:03 PDT
Needle floating on the surface of the water http://www.instructables.com/id/Needle-floating-on-the-surface-of-the-water/ http://cdn.instructables.com/FU1/U0Y2/HLJUZL7J/FU1U0Y2HLJUZL7J.SQUARE2.jpg http://cdn.instructables.com/FU1/U0Y2/HLJUZL7J/FU1U0Y2HLJUZL7J.SQUARE.jpg http://cdn.instructables.com/FU1/U0Y2/HLJUZL7J/FU1U0Y2HLJUZL7J.SMALL.jpg 7usam Floating needle on surface of water What you need 1 needle 2 cup 3 water 4 tissue Steps 1 full the cup by water. 2 put the needle on tissue. 3 and put the tissue on surface of water. What you will see You will see the tissue go down, and the needle will still floating on surface of water.
By: 7usam

Continue Reading »]]>
Sat, 14 Sep 2013 07:24:35 PDT
Paddle Board http://www.instructables.com/id/Paddle-Board/
Paddle Board - More DIY How To Projects]]> http://cdn.instructables.com/FZY/12TM/HLA279CX/FZY12TMHLA279CX.SQUARE2.jpg http://cdn.instructables.com/FZY/12TM/HLA279CX/FZY12TMHLA279CX.SQUARE.jpg http://cdn.instructables.com/FZY/12TM/HLA279CX/FZY12TMHLA279CX.SMALL.jpg donedirtcheap I wanted a paddle board. If you have been to a beach this summer you have seen someone on one. But even the very bottom end Stand Up Paddle board (hereafter SUP) starts at $350- and that is for a what is essentially a really big plastic milk jug. Plus, that hollow plastic weighs a crazy amount. Even...
By: donedirtcheap

Continue Reading »]]>
Mon, 9 Sep 2013 09:50:58 PDT
How To Make How To Make A Water Gun With A Bottle http://www.instructables.com/id/How-To-Make-How-To-Make-A-Water-Gun-With-A-Bottle/
How To Make How To Make A Water Gun With A Bottle - More DIY How To Projects]]> http://cdn.instructables.com/F7R/LOEE/HLA1V3HA/F7RLOEEHLA1V3HA.SQUARE2.jpg http://cdn.instructables.com/F7R/LOEE/HLA1V3HA/F7RLOEEHLA1V3HA.SQUARE.jpg http://cdn.instructables.com/F7R/LOEE/HLA1V3HA/F7RLOEEHLA1V3HA.SMALL.jpg haydendotcom It's easy fun ad reuse able First Get A water Bottle That's Easy To Squeez get a bottle that's eat to squeeze and make sure you have the lid. get a lighter and a needle or fork Poke The Hole Heat up your needle or fork until warm and poke 1,2or 3 holes in the lid Fill It With Water And c...
By: haydendotcom

Continue Reading »]]>
Sun, 8 Sep 2013 23:07:49 PDT
How To Throw Water on a Flowrider http://www.instructables.com/id/How-To-Throw-Water-on-a-Flowrider/ http://cdn.instructables.com/FTC/8Y39/HL5FMV9B/FTC8Y39HL5FMV9B.SQUARE2.jpg http://cdn.instructables.com/FTC/8Y39/HL5FMV9B/FTC8Y39HL5FMV9B.SQUARE.jpg http://cdn.instructables.com/FTC/8Y39/HL5FMV9B/FTC8Y39HL5FMV9B.SMALL.jpg HowToLou One of the most fun tricks to learn on a flowrider is the ability to carve so quickly across the top of the wave, that you throw water over the sides.
By: HowToLou

Continue Reading »]]>
Wed, 4 Sep 2013 16:10:16 PDT
Make a diving depth gauge http://www.instructables.com/id/Make-a-diving-depth-gauge/
Make a diving depth gauge - More DIY How To Projects]]> http://cdn.instructables.com/F8M/23G4/HKZ9J01F/F8M23G4HKZ9J01F.SQUARE2.jpg http://cdn.instructables.com/F8M/23G4/HKZ9J01F/F8M23G4HKZ9J01F.SQUARE.jpg http://cdn.instructables.com/F8M/23G4/HKZ9J01F/F8M23G4HKZ9J01F.SMALL.jpg Fborcic Frustrated by lack of cheap analog depth gauges around, I've decided to make my own. It turned out that it was very easy  to do so and gives appreciable result. So here's how to make a capillary type gauge that's relatively accurate up to 30 meters (100 feet) for about $1. Sorry for the poor image ...
By: Fborcic

Continue Reading »]]>
Mon, 2 Sep 2013 05:48:32 PDT
How To Drop In on a Flowrider http://www.instructables.com/id/How-To-Drop-In-on-a-Flowrider/ http://cdn.instructables.com/FVC/VMLU/HKTZHSQ2/FVCVMLUHKTZHSQ2.SQUARE2.jpg http://cdn.instructables.com/FVC/VMLU/HKTZHSQ2/FVCVMLUHKTZHSQ2.SQUARE.jpg http://cdn.instructables.com/FVC/VMLU/HKTZHSQ2/FVCVMLUHKTZHSQ2.SMALL.jpg HowToLou Dropping in from the top of the flowrider is one of the hardest "tricks" to learn.  There several ways to do it. I have found this is the simplest way for beginners to learn.  I have taught several people to do it this way, and they typically learn in under an hour.
By: HowToLou

Continue Reading »]]>
Mon, 26 Aug 2013 11:05:00 PDT
PVC Pool Tool (DIY Shepherd's Hook) http://www.instructables.com/id/PVC-Pool-Tool-DIY-Shepherds-Hook/
PVC Pool Tool (DIY Shepherd's Hook) - More DIY How To Projects]]> http://cdn.instructables.com/FVO/WPTK/HKPXBMD4/FVOWPTKHKPXBMD4.SQUARE2.jpg http://cdn.instructables.com/FVO/WPTK/HKPXBMD4/FVOWPTKHKPXBMD4.SQUARE.jpg http://cdn.instructables.com/FVO/WPTK/HKPXBMD4/FVOWPTKHKPXBMD4.SMALL.jpg zap1998 The backyard swimming pool can be a joy for all.  But, after the fun is over, sometimes it's tough to get all those toys out of the pool.  I needed some kind of pole with a hook on the end to speed up the process.  What about those long fiberglass or aluminum poles they sell at the pool store?  Too ...
By: zap1998

Continue Reading »]]>
Mon, 26 Aug 2013 08:24:05 PDT
The Blob http://www.instructables.com/id/The-Blob/
The Blob - More DIY How To Projects]]> http://cdn.instructables.com/FZS/CWKC/HKPX4NEO/FZSCWKCHKPX4NEO.SQUARE2.jpg http://cdn.instructables.com/FZS/CWKC/HKPX4NEO/FZSCWKCHKPX4NEO.SQUARE.jpg http://cdn.instructables.com/FZS/CWKC/HKPX4NEO/FZSCWKCHKPX4NEO.SMALL.jpg boston09 It's summer time and the kids are stuck inside playing when they should be outside enjoying the wonderful outdoors. What's the best way to beat the heat? An expensive water slide park? Maybe, but for my family, its The Blob! You can run, jump, stomp and just lay on it. Watch the waves that you creat...
By: boston09

Continue Reading »]]>
Sun, 25 Aug 2013 20:41:31 PDT
< 5$ outdoor surfboard rack ( Wall hooked) from up-cycled PVC pipes http://www.instructables.com/id/-5-outdoor-surfboard-rack-Wall-hooked-from-up-cycl/
< 5$ outdoor surfboard rack ( Wall hooked) from up-cycled PVC pipes - More DIY How To Projects]]> http://cdn.instructables.com/F7C/OIWT/HKM943UC/F7COIWTHKM943UC.SQUARE2.jpg http://cdn.instructables.com/F7C/OIWT/HKM943UC/F7COIWTHKM943UC.SQUARE.jpg http://cdn.instructables.com/F7C/OIWT/HKM943UC/F7COIWTHKM943UC.SMALL.jpg jangoachayan This is a very simple easy to make and cheap surfboard rack made of PVC tubing which can be knocked up in no time. The basic design can be modified to suit any number of boards and mounting positions. I've used 1 inch (32 mm) PVC pipes because i had a lot of discarded pieces but  u can use other si...
By: jangoachayan

Continue Reading »]]>
Thu, 22 Aug 2013 09:30:37 PDT
How to waterproof a metal detector control box for the ACE 250 for under $10 http://www.instructables.com/id/How-to-waterproof-a-metal-detector-control-box-for/ http://cdn.instructables.com/F4S/YGR1/HKM93V6C/F4SYGR1HKM93V6C.SQUARE2.jpg http://cdn.instructables.com/F4S/YGR1/HKM93V6C/F4SYGR1HKM93V6C.SQUARE.jpg http://cdn.instructables.com/F4S/YGR1/HKM93V6C/F4SYGR1HKM93V6C.SMALL.jpg mrhulot This is how I waterproofed the controls for my metal detector, which is an ACE 250 made by Garrett.  I used to make underwater camera housings as a hobby and for several years manufactured and sold the NEMO 200 which had a depth rating of 200 feet.  For shallow diving I liked to use the Lock a...
By: mrhulot

Continue Reading »]]>
Wed, 21 Aug 2013 05:54:17 PDT