Instructables: exploring - outside - blade http://www.instructables.com Sat, 3 Dec 2016 20:33:55 PST BLOX v1.01 Kama made from an old Saw Blade with basic tools http://www.instructables.com/id/Zombie-Slaying-Kama-Made-From-an-Old-Saw-Blade/
Kama made from an old Saw Blade with basic tools - More DIY How To Projects]]> https://cdn.instructables.com/F4C/YAZ6/IUSLHPAO/F4CYAZ6IUSLHPAO.SQUARE2.jpg https://cdn.instructables.com/F4C/YAZ6/IUSLHPAO/F4CYAZ6IUSLHPAO.SQUARE.jpg https://cdn.instructables.com/F4C/YAZ6/IUSLHPAO/F4CYAZ6IUSLHPAO.SMALL.jpg Alex 2Q Hi Instructables Community,this week I present you my entry for the 2016 Zombie Weapon Challenge which was initiated by Mike Fulton from the MF Woodshop. He started this challenge to celebrate the start of the new "The Walking Dead" and 24 other makers followed his call and produced a range of impro...
By: Alex 2Q

Continue Reading »]]>
Thu, 27 Oct 2016 15:22:30 PDT
How to Make a Stainless Steel Folding Knife in Two Days http://www.instructables.com/id/How-to-Make-a-Stainless-Steel-Switch-Blade-in-One-/
How to Make a Stainless Steel Folding Knife in Two Days - More DIY How To Projects]]> https://cdn.instructables.com/FZP/OILR/IT685QPS/FZPOILRIT685QPS.SQUARE2.jpg https://cdn.instructables.com/FZP/OILR/IT685QPS/FZPOILRIT685QPS.SQUARE.jpg https://cdn.instructables.com/FZP/OILR/IT685QPS/FZPOILRIT685QPS.SMALL.jpg kitsypaws After many attempts of making fixed and folding knives, I finally decided to do a little research and design a better folding knife than I'd been making. So I tried to use the most simplistic knife design I could. This is a frame lock knife, which is about the simplest, and most sturdy design I ha...
By: kitsypaws

Continue Reading »]]>
Mon, 5 Sep 2016 23:59:28 PDT
Easy File Knife http://www.instructables.com/id/Easy-File-Knife/
Easy File Knife - More DIY How To Projects]]> https://cdn.instructables.com/FIF/VEAG/IRXSXLYP/FIFVEAGIRXSXLYP.SQUARE2.jpg https://cdn.instructables.com/FIF/VEAG/IRXSXLYP/FIFVEAGIRXSXLYP.SQUARE.jpg https://cdn.instructables.com/FIF/VEAG/IRXSXLYP/FIFVEAGIRXSXLYP.SMALL.jpg milo_baker I picked up an old skinny file in a flea market and decided to make a knife from it, I did not want to have to heat treat it or put in hours of sanding, so I left the finish minimal and the blade cool as I ground it. It took about 2 days (including glue drying time) Design I drew up the design fr...
By: milo_baker

Continue Reading »]]>
Wed, 17 Aug 2016 02:07:49 PDT
Bamboo shavette $0.08 http://www.instructables.com/id/Bamboo-Shavette/
Bamboo shavette $0.08 - More DIY How To Projects]]> https://cdn.instructables.com/FSB/0UFV/INI7TWS6/FSB0UFVINI7TWS6.SQUARE2.jpg https://cdn.instructables.com/FSB/0UFV/INI7TWS6/FSB0UFVINI7TWS6.SQUARE.jpg https://cdn.instructables.com/FSB/0UFV/INI7TWS6/FSB0UFVINI7TWS6.SMALL.jpg Vitizop I wanted to create something simplebut it has a little trickthe simplicity and the low price in mind Slice I found the idea of chopsticks.All the action is done with a knife Assembly the problem was caused by the exposed sidehow to stabilize this solution the ring one major advantages: quick ...
By: Vitizop

Continue Reading »]]>
Wed, 27 Apr 2016 09:40:33 PDT
Paracord and Duct Tape Keeper http://www.instructables.com/id/Paracord-and-Duct-Tape-Keeper/
Paracord and Duct Tape Keeper - More DIY How To Projects]]> https://cdn.instructables.com/FIF/8TZP/IN234KUB/FIF8TZPIN234KUB.SQUARE2.jpg https://cdn.instructables.com/FIF/8TZP/IN234KUB/FIF8TZPIN234KUB.SQUARE.jpg https://cdn.instructables.com/FIF/8TZP/IN234KUB/FIF8TZPIN234KUB.SMALL.jpg Lorddrake Drawing inspiration from MP#14: Outdoor Paracord & Tape Organizer Mk.IV by Lets_Prep_Together I decided to make one for myself. I wasn't able to find PVC foam sheets anywhere (Alex where did you get yours?) So I was going to make mine out of hardboard. It is also called HDF (high density fiberboar...
By: Lorddrake

Continue Reading »]]>
Sat, 16 Apr 2016 06:00:42 PDT
Skinning Knife http://www.instructables.com/id/Skinning-Knife/
Skinning Knife - More DIY How To Projects]]> https://cdn.instructables.com/FLC/HX2R/IJBPPMUP/FLCHX2RIJBPPMUP.SQUARE2.jpg https://cdn.instructables.com/FLC/HX2R/IJBPPMUP/FLCHX2RIJBPPMUP.SQUARE.jpg https://cdn.instructables.com/FLC/HX2R/IJBPPMUP/FLCHX2RIJBPPMUP.SMALL.jpg BKM14 This knife was made out of a previous knife that i made, which melted partially during the heat treatment process. In this instructable I will show you how to turn around a ruined knife and turn it into something completely different, that works well and looks great . Materials/tools RUINED KNI...
By: BKM14

Continue Reading »]]>
Tue, 12 Jan 2016 23:19:51 PST
6 wrist watch survival hacks http://www.instructables.com/id/6-wrist-watch-survival-hacks/
6 wrist watch survival hacks - More DIY How To Projects]]> https://cdn.instructables.com/FBZ/L2BH/IGFGQ8L9/FBZL2BHIGFGQ8L9.SQUARE2.jpg https://cdn.instructables.com/FBZ/L2BH/IGFGQ8L9/FBZL2BHIGFGQ8L9.SQUARE.jpg https://cdn.instructables.com/FBZ/L2BH/IGFGQ8L9/FBZL2BHIGFGQ8L9.SMALL.jpg mikeasaurus No one sets out to get lost, but when it happens you need to make the most of what you have on hand...or on your wrist.Though the humble wristwatch is something that many of us might take for granted, did you know that there's a few tricks up your sleeve with this tiny timepiece? For example, there'...
By: mikeasaurus

Continue Reading »]]>
Sun, 1 Nov 2015 09:01:53 PST
Recycled kiridashi http://www.instructables.com/id/Recycled-kiridashi/
Recycled kiridashi - More DIY How To Projects]]> https://cdn.instructables.com/FMT/4NFP/IFISF705/FMT4NFPIFISF705.SQUARE2.jpg https://cdn.instructables.com/FMT/4NFP/IFISF705/FMT4NFPIFISF705.SQUARE.jpg https://cdn.instructables.com/FMT/4NFP/IFISF705/FMT4NFPIFISF705.SMALL.jpg Team_Omega From scraps left-over in shop class, to a classy little tool that originated in Japan. Please wear eye protection when working with metal or high-speed tools.Metal shaving can be very small, but they can do a lot of damage if they get in your eye or lungs.Although power tools (band-saw, angle grinde...
By: Team_Omega

Continue Reading »]]>
Thu, 8 Oct 2015 18:59:29 PDT
El Carroñero: The Scavenged Survival Blade http://www.instructables.com/id/El-Carroñero-The-Scavenged-Survival-Blade/
El Carroñero: The Scavenged Survival Blade - More DIY How To Projects]]> https://cdn.instructables.com/FP5/PQYV/IFGNQU1V/FP5PQYVIFGNQU1V.SQUARE2.jpg https://cdn.instructables.com/FP5/PQYV/IFGNQU1V/FP5PQYVIFGNQU1V.SQUARE.jpg https://cdn.instructables.com/FP5/PQYV/IFGNQU1V/FP5PQYVIFGNQU1V.SMALL.jpg FlatCatRussellandtheTennesseeTwo Sometimes I get really into making something that's both beautiful and functional, but today ain't that day.Inspired by Instructables' Survival Contest and a week of binge-watching The Walking Dead (as well as procrastinating on my dissertation), I decided to give myself a 30-5-30-30 challenge! Wha...
By: FlatCatRussellandtheTennesseeTwo

Continue Reading »]]>
Wed, 7 Oct 2015 12:37:02 PDT
How to make a Bushcraft knife http://www.instructables.com/id/How-to-make-a-Bushcraft-knife/
How to make a Bushcraft knife - More DIY How To Projects]]> https://cdn.instructables.com/FHW/NV1L/IF6NLY5I/FHWNV1LIF6NLY5I.SQUARE2.jpg https://cdn.instructables.com/FHW/NV1L/IF6NLY5I/FHWNV1LIF6NLY5I.SQUARE.jpg https://cdn.instructables.com/FHW/NV1L/IF6NLY5I/FHWNV1LIF6NLY5I.SMALL.jpg Jake_Makes This is how I make my knives. Yes, it is exactly the same as any other knife Instructable on here. Do I care? Nope. And, neither do you, apparently. After all, you're reading it.I haven't posted much on Instructables yet, but that doesn't mean I haven't made many things. Look on my blog for all my o...
By: Jake_Makes

Continue Reading »]]>
Wed, 30 Sep 2015 10:25:19 PDT
Custom Graphic Leather Knife Sheath http://www.instructables.com/id/Custom-Graphic-Leather-Knife-Sheath/
Custom Graphic Leather Knife Sheath - More DIY How To Projects]]> https://cdn.instructables.com/FX8/CRDT/IEN4Q2FA/FX8CRDTIEN4Q2FA.SQUARE2.jpg https://cdn.instructables.com/FX8/CRDT/IEN4Q2FA/FX8CRDTIEN4Q2FA.SQUARE.jpg https://cdn.instructables.com/FX8/CRDT/IEN4Q2FA/FX8CRDTIEN4Q2FA.SMALL.jpg Corasaurus Rex When out in the bush a knife like this Buck Knife is one of the most important items you can have. Not only does a knife come in handy for cutting and keeping you safe but a single blade like this one can be used as a hatchet as well buy striking it with a solid stick when its pressed up against a ...
By: Corasaurus Rex

Continue Reading »]]>
Wed, 16 Sep 2015 13:05:49 PDT
how to shave with an axe http://www.instructables.com/id/how-to-shave-with-an-axe/
how to shave with an axe - More DIY How To Projects]]> https://cdn.instructables.com/F2Q/PI6W/ID77NDM4/F2QPI6WID77NDM4.SQUARE2.jpg https://cdn.instructables.com/F2Q/PI6W/ID77NDM4/F2QPI6WID77NDM4.SQUARE.jpg https://cdn.instructables.com/F2Q/PI6W/ID77NDM4/F2QPI6WID77NDM4.SMALL.jpg mikeasaurus Few things are manlier than shaving with a straight razor, except maybe shaving with an axe. Having never shaved with a straight razor before I decided if I was going to learn to shave with a single blade I was going to start in the deep end and learn with an axe. Go big, or go home. So, I sharpened...
By: mikeasaurus

Continue Reading »]]>
Tue, 11 Aug 2015 08:28:51 PDT
Nail Katana http://www.instructables.com/id/Nail-Katana-1/
Nail Katana - More DIY How To Projects]]> https://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SQUARE2.jpg https://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SQUARE.jpg https://cdn.instructables.com/F7B/VNEG/I78VO09N/F7BVNEGI78VO09N.SMALL.jpg extense This instructable will show you how to make a fully functionnal miniature blade as well as a miniature scabbard - the former from an ordinary iron nail, and the latter from a strip aluminium can. Although not technically a true katana, I thought I'd use the name anyway. Why?Because I can now call it...
By: extense

Continue Reading »]]>
Sat, 14 Mar 2015 20:31:28 PDT
Apocalypse Preparedness: Deadly Spearhead http://www.instructables.com/id/Apocalypse-Preparedness-Deadly-Spearhead/
Apocalypse Preparedness: Deadly Spearhead - More DIY How To Projects]]> https://cdn.instructables.com/F2A/MXGG/I6NI566X/F2AMXGGI6NI566X.SQUARE2.jpg https://cdn.instructables.com/F2A/MXGG/I6NI566X/F2AMXGGI6NI566X.SQUARE.jpg https://cdn.instructables.com/F2A/MXGG/I6NI566X/F2AMXGGI6NI566X.SMALL.jpg ilikeknives In a post- apocalypse world, you may not have guns or normal weapons for various reasons. So the skill of making your own weapons for hunting or self defence will be priceless. In this instructable I will teach you how to make your own spear from things you already have. Selecting Materials Be c...
By: ilikeknives

Continue Reading »]]>
Thu, 26 Feb 2015 07:25:00 PST
Survival knife 3 http://www.instructables.com/id/Survival-knife-3/
Survival knife 3 - More DIY How To Projects]]> https://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SQUARE2.jpg https://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SQUARE.jpg https://cdn.instructables.com/FC1/58DR/I8CVW2UC/FC158DRI8CVW2UC.SMALL.jpg mandamados Overall Length: 33 cmBlade Thickness: 5 mmBlade Material: Uddeholm sleipner steel Grinding I used Uddeholm Sleipner tool steel, 8mm thick. But the knife should be about 5 mm thick, so it should be ground. Use a dust mask for safety. Profiling the knife shape Profiling the knife shape with an a...
By: mandamados

Continue Reading »]]>
Tue, 24 Feb 2015 01:29:50 PST
Tanto Knife http://www.instructables.com/id/Tanto-Knife/
Tanto Knife - More DIY How To Projects]]> https://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SQUARE2.jpg https://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SQUARE.jpg https://cdn.instructables.com/FG6/RJ7L/I0TE6RMS/FG6RJ7LI0TE6RMS.SMALL.jpg mandamados It's my third attempt to make knifes. I use Uddeholm Arne tool steel, 6mm thick. Grinding I used Uddeholm Arne tool steel, 6mm thick. But the knife should be about 4.4 mm thick, so it should be ground. Shape of the knife Cut the blade with an angle grinder Finishing the blade Finish the fin...
By: mandamados

Continue Reading »]]>
Fri, 3 Oct 2014 06:32:00 PDT
Razor Blade Survival Knife http://www.instructables.com/id/Razor-Blade-Survival-Knife/
Razor Blade Survival Knife - More DIY How To Projects]]> https://cdn.instructables.com/FXR/FR21/HZL3LBNL/FXRFR21HZL3LBNL.SQUARE2.jpg https://cdn.instructables.com/FXR/FR21/HZL3LBNL/FXRFR21HZL3LBNL.SQUARE.jpg https://cdn.instructables.com/FXR/FR21/HZL3LBNL/FXRFR21HZL3LBNL.SMALL.jpg DanishMaker This is a survival knife i made with stuff from my survival tin, and some things you can find in the Nature. Not the biggest knife, but its very handy, you can clean your fish, you can cut wood or you can cut your string. Find the things! In the survival kit can you find:StringRazorbladeIn the na...
By: DanishMaker

Continue Reading »]]>
Tue, 2 Sep 2014 07:27:43 PDT
Emergency fishing line http://www.instructables.com/id/Emergency-fishing-line/
Emergency fishing line - More DIY How To Projects]]> https://cdn.instructables.com/FOY/K0M3/HYZX1OWC/FOYK0M3HYZX1OWC.SQUARE2.jpg https://cdn.instructables.com/FOY/K0M3/HYZX1OWC/FOYK0M3HYZX1OWC.SQUARE.jpg https://cdn.instructables.com/FOY/K0M3/HYZX1OWC/FOYK0M3HYZX1OWC.SMALL.jpg andrea biffi With this DIY tool you can easily make very long fishing lines in emergency circumstances. Not only that, you can make a strong plastic wire to wrap wood branches together and build structures, you can easily replace you shoe laces, hang up food to trees during the night, build an hammock, or net to...
By: andrea biffi

Continue Reading »]]>
Mon, 4 Aug 2014 11:40:52 PDT
Make knife sheath and turn your kitchen knife into a camping, fishing or hunting knife http://www.instructables.com/id/Make-knife-sheath-and-turn-your-kitchen-knife-into/
Make knife sheath and turn your kitchen knife into a camping, fishing or hunting knife - More DIY How To Projects]]> https://cdn.instructables.com/FVL/V30S/HY7T1DT9/FVLV30SHY7T1DT9.SQUARE2.jpg https://cdn.instructables.com/FVL/V30S/HY7T1DT9/FVLV30SHY7T1DT9.SQUARE.jpg https://cdn.instructables.com/FVL/V30S/HY7T1DT9/FVLV30SHY7T1DT9.SMALL.jpg Anthony420 In this tutorial I will show you how to to make a steath for a knife, it takes no more than 15-20minutes. I think everyone has these basic things at their home, things you need to make this knife steath.If you don't understand something just comment and I will reply you as soon as possible.Enjoy!:) ...
By: Anthony420

Continue Reading »]]>
Tue, 29 Jul 2014 17:52:49 PDT
How to make Knife and Sword Easy http://www.instructables.com/id/How-to-make-Knife-and-Sword-Easy/
How to make Knife and Sword Easy - More DIY How To Projects]]> https://cdn.instructables.com/FAT/OF0Y/HXSDQHJG/FATOF0YHXSDQHJG.SQUARE2.jpg https://cdn.instructables.com/FAT/OF0Y/HXSDQHJG/FATOF0YHXSDQHJG.SQUARE.jpg https://cdn.instructables.com/FAT/OF0Y/HXSDQHJG/FATOF0YHXSDQHJG.SMALL.jpg bjackson24 In this Instructable I willbe showing you how to make a metal Knife, and a metal Sword. Unfortunately I do not have any pictures of me making the sword, but I do have of me making the knife due to the fact that the knife was made after the sword. However you can still make the sword by following the...
By: bjackson24

Continue Reading »]]>
Sat, 19 Jul 2014 14:34:42 PDT
Functional Retractable Assassin's Creed Hidden Blade (Xiphoid) http://www.instructables.com/id/Assassins-Creed-Hidden-Blade-Xiphoid/
Functional Retractable Assassin's Creed Hidden Blade (Xiphoid) - More DIY How To Projects]]> https://cdn.instructables.com/F4V/J220/HXIK8NJT/F4VJ220HXIK8NJT.SQUARE2.jpg https://cdn.instructables.com/F4V/J220/HXIK8NJT/F4VJ220HXIK8NJT.SQUARE.jpg https://cdn.instructables.com/F4V/J220/HXIK8NJT/F4VJ220HXIK8NJT.SMALL.jpg TheSakariRock About a year ago I was inspired by a friend to make a xiphoid, commonly known as the Assassin Creed hidden blade. After making a video on YouTube that showcased my first design I received endless requests to make tutorials or sell my model. However, I wasn't satisfied with my first design and I cam...
By: TheSakariRock

Continue Reading »]]>
Mon, 14 Jul 2014 15:13:06 PDT
Home made Knife 2 Tutorial! http://www.instructables.com/id/Home-made-Knife-2-Tutorial/
Home made Knife 2 Tutorial! - More DIY How To Projects]]> https://cdn.instructables.com/F4T/UM4H/HXA9MTQ5/F4TUM4HHXA9MTQ5.SQUARE2.jpg https://cdn.instructables.com/F4T/UM4H/HXA9MTQ5/F4TUM4HHXA9MTQ5.SQUARE.jpg https://cdn.instructables.com/F4T/UM4H/HXA9MTQ5/F4TUM4HHXA9MTQ5.SMALL.jpg solsmac This is the homemade survival knife tutorial as requested! Also I had help from my friend jakewoody go follow him! Remove Blade From Pocket Knife. A good tip is to use a blade that can be removed by a screw unlike the one we used! Cut A Pocket For Your Blade. I would recommend marking how deep...
By: solsmac

Continue Reading »]]>
Sun, 6 Jul 2014 17:22:06 PDT
New! Blade And Multi Tool Collection http://www.instructables.com/id/New-Blade-And-Multi-Tool-Collection/
New! Blade And Multi Tool Collection - More DIY How To Projects]]> https://cdn.instructables.com/F8J/1ZON/HXA9O7H8/F8J1ZONHXA9O7H8.SQUARE2.jpg https://cdn.instructables.com/F8J/1ZON/HXA9O7H8/F8J1ZONHXA9O7H8.SQUARE.jpg https://cdn.instructables.com/F8J/1ZON/HXA9O7H8/F8J1ZONHXA9O7H8.SMALL.jpg MMB Survivor If you have seen my earlier weapon collection, you can obviously tell some new stuff has come in. But also some things have stayed. If I get 50 favorites, I will do a ranged weapon collection! Throwing Knives. These are my HIBBEN CUSTOM DESIGNED throwing knives and I am very glad about the stre...
By: MMB Survivor

Continue Reading »]]>
Sat, 5 Jul 2014 09:29:19 PDT
Exacto Blade Survival Knife http://www.instructables.com/id/Exacto-Blade-Survival-Knife/
Exacto Blade Survival Knife - More DIY How To Projects]]> https://cdn.instructables.com/FNH/YMTY/HTEFM5R2/FNHYMTYHTEFM5R2.SQUARE2.jpg https://cdn.instructables.com/FNH/YMTY/HTEFM5R2/FNHYMTYHTEFM5R2.SQUARE.jpg https://cdn.instructables.com/FNH/YMTY/HTEFM5R2/FNHYMTYHTEFM5R2.SMALL.jpg apk2000 This instructable is on how to make a knife out of an Exacto Blade or surgical blade. Materials You need a stick, small rope (I used the inner strands of paracord), and a surgical or Exacto blade. Sand one end of the stick with a large rock. Split the Stick Next, place the blade in the m...
By: apk2000

Continue Reading »]]>
Sun, 30 Mar 2014 09:25:29 PDT
Pocketknife with locking blade http://www.instructables.com/id/Pocketknife-with-locking-blade/
Pocketknife with locking blade - More DIY How To Projects]]> https://cdn.instructables.com/F5A/QJNF/HQQLKFTI/F5AQJNFHQQLKFTI.SQUARE2.jpg https://cdn.instructables.com/F5A/QJNF/HQQLKFTI/F5AQJNFHQQLKFTI.SQUARE.jpg https://cdn.instructables.com/F5A/QJNF/HQQLKFTI/F5AQJNFHQQLKFTI.SMALL.jpg assemblyrequired I lost a decent multitool a while back, and this made me realize how important a sharp blade was to a lot of things. One of my favorite features of the multitool I had was that it folded up and had a locking blade- two features that saved my fingers countless times. I had been wanting to make a good...
By: assemblyrequired

Continue Reading »]]>
Wed, 22 Jan 2014 08:01:54 PST
Make a broken swis army knife into a useful fixed blade knife http://www.instructables.com/id/Make-a-broken-swis-army-knife-into-a-useful-fixed-/
Make a broken swis army knife into a useful fixed blade knife - More DIY How To Projects]]> https://cdn.instructables.com/FC9/3IB5/HLSHDHQH/FC93IB5HLSHDHQH.SQUARE2.jpg https://cdn.instructables.com/FC9/3IB5/HLSHDHQH/FC93IB5HLSHDHQH.SQUARE.jpg https://cdn.instructables.com/FC9/3IB5/HLSHDHQH/FC93IB5HLSHDHQH.SMALL.jpg Assassin Tube I never like to throw a knife away, so I don't, hope this helps :)
By: Assassin Tube

Continue Reading »]]>
Sat, 21 Sep 2013 17:06:13 PDT
How To Make A Knife In The Wild, From Stone And Wood! http://www.instructables.com/id/How-To-Make-A-Knife-In-The-Wild-From-Stone-And-Woo/
How To Make A Knife In The Wild, From Stone And Wood! - More DIY How To Projects]]> https://cdn.instructables.com/FL2/H6KD/HLJUQ9MN/FL2H6KDHLJUQ9MN.SQUARE2.jpg https://cdn.instructables.com/FL2/H6KD/HLJUQ9MN/FL2H6KDHLJUQ9MN.SQUARE.jpg https://cdn.instructables.com/FL2/H6KD/HLJUQ9MN/FL2H6KDHLJUQ9MN.SMALL.jpg Assassin Tube I've always wanted a stone knife, so I made one and thought you guys might wanna make one to.. So heres the tut..
By: Assassin Tube

Continue Reading »]]>
Sat, 14 Sep 2013 14:11:24 PDT
Creating A Bush Knife From An Old Hand File http://www.instructables.com/id/Creating-A-Bush-Knife-From-An-Old-Hand-File/
Creating A Bush Knife From An Old Hand File - More DIY How To Projects]]> https://cdn.instructables.com/FLK/K50L/HLFUTBLW/FLKK50LHLFUTBLW.SQUARE2.jpg https://cdn.instructables.com/FLK/K50L/HLFUTBLW/FLKK50LHLFUTBLW.SQUARE.jpg https://cdn.instructables.com/FLK/K50L/HLFUTBLW/FLKK50LHLFUTBLW.SMALL.jpg antagonizer I love making my own tools. From chisels to crooked knives, the process, I feel, binds that tool to you and personalizes it in a way that gives it value that a store bought item can't. On this one, I had an old hand file from the early 1900's that I was saving for just such a project. After discuss...
By: antagonizer

Continue Reading »]]>
Wed, 11 Sep 2013 20:01:25 PDT
Make An Awesome Butterfly/Balisong Knife for $4 + 240fps Slow-Mo Examples http://www.instructables.com/id/Make-An-Awesome-ButterflyBalisong-Knife-for-4-/
Make An Awesome Butterfly/Balisong Knife for $4 + 240fps Slow-Mo Examples - More DIY How To Projects]]> https://cdn.instructables.com/FIU/V1A7/HJW8WKF5/FIUV1A7HJW8WKF5.SQUARE2.jpg https://cdn.instructables.com/FIU/V1A7/HJW8WKF5/FIUV1A7HJW8WKF5.SQUARE.jpg https://cdn.instructables.com/FIU/V1A7/HJW8WKF5/FIUV1A7HJW8WKF5.SMALL.jpg SubjectAwesome Now streaming art, design and gaming at twitch live! a follow would be amazing and I would love to talk to you! ^.^ - http://www.twitch.tv/soulis_greyThis is a easy and quick tutorial for making and awesome butterfly knife. The knife can be made out of some scrap metal and 2 pins or bolts. It took m...
By: SubjectAwesome

Continue Reading »]]>
Tue, 6 Aug 2013 10:31:57 PDT
How to refurbish and clean a broken knife. http://www.instructables.com/id/How-to-refurbish-and-clean-a-broken-knife/
How to refurbish and clean a broken knife. - More DIY How To Projects]]> https://cdn.instructables.com/F1Q/XUL2/HJKC68WG/F1QXUL2HJKC68WG.SQUARE2.jpg https://cdn.instructables.com/F1Q/XUL2/HJKC68WG/F1QXUL2HJKC68WG.SQUARE.jpg https://cdn.instructables.com/F1Q/XUL2/HJKC68WG/F1QXUL2HJKC68WG.SMALL.jpg Assassin Tube I never like throwing a knife away so I decided to fix this one and it was really scratched up so I cleaned all the black paint off it so now its silver. Watch the video to learn :)
By: Assassin Tube

Continue Reading »]]>
Tue, 30 Jul 2013 05:44:40 PDT
Make A Huge, Epic Knife "The Dolphin Blade" For Only $8 (Small Sword) http://www.instructables.com/id/How-To-Make-A-Huge-Epic-Knife-The-Dolphin-Blade/
Make A Huge, Epic Knife "The Dolphin Blade" For Only $8 (Small Sword) - More DIY How To Projects]]> https://cdn.instructables.com/FPG/792T/HIGF4RQK/FPG792THIGF4RQK.SQUARE2.jpg https://cdn.instructables.com/FPG/792T/HIGF4RQK/FPG792THIGF4RQK.SQUARE.jpg https://cdn.instructables.com/FPG/792T/HIGF4RQK/FPG792THIGF4RQK.SMALL.jpg SubjectAwesome Now streaming art, design and gaming at twitch live! a follow would be amazing and I would love to talk to you! ^.^ - http://www.twitch.tv/soulis_grey Here's a tutorial on how to make a pretty easy, yet awesome usable blade for only around $8. This knife is great for cutting plastic bottles, tins...
By: SubjectAwesome

Continue Reading »]]>
Mon, 1 Jul 2013 23:55:26 PDT
The Epic-est Knife/Sword ever: http://www.instructables.com/id/The-Epic-est-KnifeSword-ever-the-Stormblade-fit/
The Epic-est Knife/Sword ever: - More DIY How To Projects]]> https://cdn.instructables.com/FA6/2RJE/HI3U18NF/FA62RJEHI3U18NF.SQUARE2.jpg https://cdn.instructables.com/FA6/2RJE/HI3U18NF/FA62RJEHI3U18NF.SQUARE.jpg https://cdn.instructables.com/FA6/2RJE/HI3U18NF/FA62RJEHI3U18NF.SMALL.jpg snowfalcon1 Badassness is now easier than ever before! It chops ok, but you can put all your weight behind a thrust. it uses an $8 survival knife from harbor freight and some pvc. the 3/4" pvc fits perfectly into the hollow handle of the knife. the rest is a "T" part used as a handle, and a piece large enough t...
By: snowfalcon1

Continue Reading »]]>
Thu, 20 Jun 2013 15:57:53 PDT
Vine filework for knives http://www.instructables.com/id/Vine-filework-for-knives/
Vine filework for knives - More DIY How To Projects]]> https://cdn.instructables.com/FTM/MK7K/HFPTIB10/FTMMK7KHFPTIB10.SQUARE2.jpg https://cdn.instructables.com/FTM/MK7K/HFPTIB10/FTMMK7KHFPTIB10.SQUARE.jpg https://cdn.instructables.com/FTM/MK7K/HFPTIB10/FTMMK7KHFPTIB10.SMALL.jpg atomiccelt This instructable will focus on adding a simple decorative filework design on the spine of a knifeblade. Filework, for those of you who don't know, can be meant either as primarily aesthetic rather than functional or vice versa. In this case, we will be focusing primarily on improving the aesthetics...
By: atomiccelt

Continue Reading »]]>
Sun, 28 Apr 2013 20:08:09 PDT
Profiling a knife shape, from concept to execution. http://www.instructables.com/id/Profiling-a-knife-shape-from-concept-to-execution/
Profiling a knife shape, from concept to execution. - More DIY How To Projects]]> https://cdn.instructables.com/FAC/J3W0/HELX721K/FACJ3W0HELX721K.SQUARE2.jpg https://cdn.instructables.com/FAC/J3W0/HELX721K/FACJ3W0HELX721K.SQUARE.jpg https://cdn.instructables.com/FAC/J3W0/HELX721K/FACJ3W0HELX721K.SMALL.jpg atomiccelt As a knifemaker, whether you're a first-timer or a veteran, one of the most basic skills you need to develop is blade profiling. Essentially, that amounts to developing the basic blade shape that will eventually become your finished knife.  There are two general approaches to making a knife. On the...
By: atomiccelt

Continue Reading »]]>
Mon, 25 Mar 2013 07:57:38 PDT
How to make a liner lock folding knife http://www.instructables.com/id/How-to-make-a-liner-lock-folding-knife/
How to make a liner lock folding knife - More DIY How To Projects]]> https://cdn.instructables.com/FPN/R194/HFSHTP6Z/FPNR194HFSHTP6Z.SQUARE2.jpg https://cdn.instructables.com/FPN/R194/HFSHTP6Z/FPNR194HFSHTP6Z.SQUARE.jpg https://cdn.instructables.com/FPN/R194/HFSHTP6Z/FPNR194HFSHTP6Z.SMALL.jpg Batryn I've posted an instructable about making a fixed blade knife. It'll be useful to read that first, because in this instructable, I will not go over those steps again, but merely focus upon the nuances involved with creating a folding knife.  A link can be found here: http://www.instructables.com/id/K...
By: Batryn

Continue Reading »]]>
Fri, 11 Jan 2013 22:51:37 PST
motor chain handle knife 4 http://www.instructables.com/id/Motor-chain-handle-dagger/
motor chain handle knife 4 - More DIY How To Projects]]> https://cdn.instructables.com/FAC/SJJQ/HBFFJNJ3/FACSJJQHBFFJNJ3.SQUARE2.jpg https://cdn.instructables.com/FAC/SJJQ/HBFFJNJ3/FACSJJQHBFFJNJ3.SQUARE.jpg https://cdn.instructables.com/FAC/SJJQ/HBFFJNJ3/FACSJJQHBFFJNJ3.SMALL.jpg Vitizop Motor chain handle dagger Replaced engine in a prolonged breakdown of chain eyes I established the dagger hilt ended up with only their own, without welding it is very nice for catching falls, para cord without the original chain is not damaged due to disassembly of the real difficulties
By: Vitizop

Continue Reading »]]>
Sun, 6 Jan 2013 13:55:26 PST
Stag Handle Knives http://www.instructables.com/id/Stag-Handle-Knives/
Stag Handle Knives - More DIY How To Projects]]> https://cdn.instructables.com/FJH/C2VY/H9K2FZPF/FJHC2VYH9K2FZPF.SQUARE2.jpg https://cdn.instructables.com/FJH/C2VY/H9K2FZPF/FJHC2VYH9K2FZPF.SQUARE.jpg https://cdn.instructables.com/FJH/C2VY/H9K2FZPF/FJHC2VYH9K2FZPF.SMALL.jpg mr.mountaineer I just wanted to show off a couple of the knives I've made. The blade on the first one is 5 3/4" long and made of a circular saw blade. the blade on the second one is 4 3/4" long and made of a file. Both blades are attached using the method described HERE and reinforced with pine rosin. if anyone ne...
By: mr.mountaineer

Continue Reading »]]>
Mon, 19 Nov 2012 15:27:50 PST
flat blade knife http://www.instructables.com/id/flat-blade-knife/
flat blade knife - More DIY How To Projects]]> https://cdn.instructables.com/FRY/W5OV/H5TU8LJ7/FRYW5OVH5TU8LJ7.SQUARE2.jpg https://cdn.instructables.com/FRY/W5OV/H5TU8LJ7/FRYW5OVH5TU8LJ7.SQUARE.jpg https://cdn.instructables.com/FRY/W5OV/H5TU8LJ7/FRYW5OVH5TU8LJ7.SMALL.jpg Vitizop flat-blade I found a piece of sheet iron, with a hole in the end I wanted the least amount of conversion to usable I used the cold cap edge, and then filed, polished the grip of cold-forged was developed by id trained in fire, sterilized (cherry red color intoxicated) used sand paper: grain size of...
By: Vitizop

Continue Reading »]]>
Wed, 15 Aug 2012 14:32:35 PDT
screw handle old file blade http://www.instructables.com/id/screw-handle-old-file-blade/
screw handle old file blade - More DIY How To Projects]]> https://cdn.instructables.com/F3U/1SHU/H5JVXORC/F3U1SHUH5JVXORC.SQUARE2.jpg https://cdn.instructables.com/F3U/1SHU/H5JVXORC/F3U1SHUH5JVXORC.SQUARE.jpg https://cdn.instructables.com/F3U/1SHU/H5JVXORC/F3U1SHUH5JVXORC.SMALL.jpg Vitizop screw handle old file blade What if the bolt handle welded would consist? catching all the good does not slip out of hand gloves is recommended I left most of the file worn, but a hard and fast sharpening good If two hands of the killer jungle and mini blade remains sharp and the other is good c...
By: Vitizop

Continue Reading »]]>
Thu, 9 Aug 2012 13:41:12 PDT
forgotten rusty lawnmower blade http://www.instructables.com/id/forgotten-rusty-lawnmower-blade/
forgotten rusty lawnmower blade - More DIY How To Projects]]> https://cdn.instructables.com/FC7/5QD8/H4AFZFDX/FC75QD8H4AFZFDX.SQUARE2.jpg https://cdn.instructables.com/FC7/5QD8/H4AFZFDX/FC75QD8H4AFZFDX.SQUARE.jpg https://cdn.instructables.com/FC7/5QD8/H4AFZFDX/FC75QD8H4AFZFDX.SMALL.jpg Vitizop forgotten  rusty lawnmower blade The handle is shock absorber part. - shaped cutting edge (~15° , ~20°)  -like chisel or drawing-knife- - right-handed
By: Vitizop

Continue Reading »]]>
Mon, 9 Jul 2012 02:10:52 PDT
composted grass http://www.instructables.com/id/composted-grass-1/
composted grass - More DIY How To Projects]]> https://cdn.instructables.com/FT9/5243/H337KVQT/FT95243H337KVQT.SQUARE2.jpg https://cdn.instructables.com/FT9/5243/H337KVQT/FT95243H337KVQT.SQUARE.jpg https://cdn.instructables.com/FT9/5243/H337KVQT/FT95243H337KVQT.SMALL.jpg Vitizop composted grass cheap and easy ingredients: -sharp knife -car tires
By: Vitizop

Continue Reading »]]>
Wed, 13 Jun 2012 01:33:21 PDT
How to make stainless survival knife for kitchen use (holey blade) http://www.instructables.com/id/How-to-make-stainless-survivor-knife/
How to make stainless survival knife for kitchen use (holey blade) - More DIY How To Projects]]> https://cdn.instructables.com/FFE/43PN/HI3U2AVY/FFE43PNHI3U2AVY.SQUARE2.jpg https://cdn.instructables.com/FFE/43PN/HI3U2AVY/FFE43PNHI3U2AVY.SQUARE.jpg https://cdn.instructables.com/FFE/43PN/HI3U2AVY/FFE43PNHI3U2AVY.SMALL.jpg Vitizop How to make stainless survival knife for kitchen use (excellent for cutting cheese) The blade base material is interesting is the following: was a component of a galvanic machine. It is considered to be included in the workpiece. Unfortunately, quite soft, not hold an edge well. Conversely, acid a...
By: Vitizop

Continue Reading »]]>
Wed, 6 Jun 2012 08:37:40 PDT
Transforming your Riding Lawn Mower into the Ultimate Snow Mover. http://www.instructables.com/id/Transforming-your-Riding-Lawn-Mower-into-the-Ultim/
Transforming your Riding Lawn Mower into the Ultimate Snow Mover. - More DIY How To Projects]]> https://cdn.instructables.com/FZV/NDBJ/GZI8K8OY/FZVNDBJGZI8K8OY.SQUARE2.jpg https://cdn.instructables.com/FZV/NDBJ/GZI8K8OY/FZVNDBJGZI8K8OY.SQUARE.jpg https://cdn.instructables.com/FZV/NDBJ/GZI8K8OY/FZVNDBJGZI8K8OY.SMALL.jpg kdgraham In 4 easy steps and 45 minutes, this instructable will show a non expert the ways to transform his/her riding lawn mower into the best snow removing machine.  This will save money as one can clear his/her own driveway and not have to pay anyone to do it for them!  TIP:  This will display a John Dee...
By: kdgraham

Continue Reading »]]>
Mon, 19 Mar 2012 11:28:55 PDT
Altoids Pocket Survival Kit http://www.instructables.com/id/Altoids-Pocket-Survival-Kit/
Altoids Pocket Survival Kit - More DIY How To Projects]]> https://cdn.instructables.com/FLU/DKCN/GZ38JHXI/FLUDKCNGZ38JHXI.SQUARE2.jpg https://cdn.instructables.com/FLU/DKCN/GZ38JHXI/FLUDKCNGZ38JHXI.SQUARE.jpg https://cdn.instructables.com/FLU/DKCN/GZ38JHXI/FLUDKCNGZ38JHXI.SMALL.jpg MicahelRoss This is my survival kit I made. Very useful in camping trips and survival situations. Neat, Pocket size, and ready to GO! Contents -Fishing hook -Needle -Napkin -2 Fire strikers -6 straw Fire starters -Tinfoil -2 Bandages -Mini Multi tool -5 Matches -2 Safety pins - 2 Birthday candles - Some sa...
By: MicahelRoss

Continue Reading »]]>
Mon, 27 Feb 2012 18:11:15 PST
Knife Making http://www.instructables.com/id/Knife-Making/
Knife Making - More DIY How To Projects]]> https://cdn.instructables.com/FJS/KQEC/GYY8FRAI/FJSKQECGYY8FRAI.SQUARE2.jpg https://cdn.instructables.com/FJS/KQEC/GYY8FRAI/FJSKQECGYY8FRAI.SQUARE.jpg https://cdn.instructables.com/FJS/KQEC/GYY8FRAI/FJSKQECGYY8FRAI.SMALL.jpg Batryn Disclaimers: Knife making is dangerous, I'm not responsible if you get hurt. Also, know your laws, and don't make anything illegal. I'm not responsible for anything that happens as a consequence of you reading this.  This is a personal project of mine, and when I finished, I thought, why not make a...
By: Batryn

Continue Reading »]]>
Wed, 22 Feb 2012 16:28:47 PST
Light, compact survival kit from household materials http://www.instructables.com/id/Light-compact-survival-kit-from-household-materia/
Light, compact survival kit from household materials - More DIY How To Projects]]> https://cdn.instructables.com/FYC/GVX5/GTW606KM/FYCGVX5GTW606KM.SQUARE2.jpg https://cdn.instructables.com/FYC/GVX5/GTW606KM/FYCGVX5GTW606KM.SQUARE.jpg https://cdn.instructables.com/FYC/GVX5/GTW606KM/FYCGVX5GTW606KM.SMALL.jpg Qtirpak This instructable will show how to create a simple, light weight survival kit. It only includes the items that are absolutely needed, and is minimalistic. Materials You will need: 1. duct tape 2. small led flashlight(mine came with laser pointer) 3. small plastic or metal container(i used ice bre...
By: Qtirpak

Continue Reading »]]>
Mon, 17 Oct 2011 20:59:22 PDT
Glaive (Custom Knife) http://www.instructables.com/id/Glaive-Custom-Knife/
Glaive (Custom Knife) - More DIY How To Projects]]> https://cdn.instructables.com/FRR/5FO7/GS3BDK0D/FRR5FO7GS3BDK0D.SQUARE2.jpg https://cdn.instructables.com/FRR/5FO7/GS3BDK0D/FRR5FO7GS3BDK0D.SQUARE.jpg https://cdn.instructables.com/FRR/5FO7/GS3BDK0D/FRR5FO7GS3BDK0D.SMALL.jpg master_paradox I know it's not a true glaive, but from what I've read it's close; single-edged chopping/slashing type blade, in this case with a one-handed grip rather than a staff.  I attached another smaller blade to the bottom.
By: master_paradox

Continue Reading »]]>
Fri, 2 Sep 2011 19:11:11 PDT
My Blade Of Death http://www.instructables.com/id/My-Blade-Of-Death/
My Blade Of Death - More DIY How To Projects]]> https://cdn.instructables.com/FH7/KF8R/GQ5PW956/FH7KF8RGQ5PW956.SQUARE2.jpg https://cdn.instructables.com/FH7/KF8R/GQ5PW956/FH7KF8RGQ5PW956.SQUARE.jpg https://cdn.instructables.com/FH7/KF8R/GQ5PW956/FH7KF8RGQ5PW956.SMALL.jpg CrayfishYAY 1 day, I went to Office Depot & got some magnets. These magnets were attached to a metal plate. Well, I decided to keep the plate & it had been lying around the house being useless. Well, if you're anything like me, you would try your hardest to think of a way to turn junk into a toy or something us...
By: CrayfishYAY

Continue Reading »]]>
Sat, 6 Aug 2011 18:20:04 PDT
My First Knife http://www.instructables.com/id/My-First-Knife/
My First Knife - More DIY How To Projects]]> https://cdn.instructables.com/F33/N7AH/GEVZWCE7/F33N7AHGEVZWCE7.SQUARE2.jpg https://cdn.instructables.com/F33/N7AH/GEVZWCE7/F33N7AHGEVZWCE7.SQUARE.jpg https://cdn.instructables.com/F33/N7AH/GEVZWCE7/F33N7AHGEVZWCE7.SMALL.jpg markbyounger I've thought about making a knife for a while and thought I'd be restricted to a fixed blade since folding blades seemed difficult to perfect. I saw the Svord Peasant knife somewhere online somewhere and I hope they take it as flattery that I wanted to copy their design. They, in turn, based their d...
By: markbyounger

Continue Reading »]]>
Thu, 7 Oct 2010 11:24:21 PDT
Learn to "shovel" on a ripstick! http://www.instructables.com/id/Learn-to-shovel-ona-ripstick/
Learn to "shovel" on a ripstick! - More DIY How To Projects]]> https://cdn.instructables.com/FR1/HU3G/GC4G14SR/FR1HU3GGC4G14SR.SQUARE2.jpg https://cdn.instructables.com/FR1/HU3G/GC4G14SR/FR1HU3GGC4G14SR.SQUARE.jpg https://cdn.instructables.com/FR1/HU3G/GC4G14SR/FR1HU3GGC4G14SR.SMALL.jpg the_burrito_master I invented a trick i call the Shovel because you push your ripstick out in front of you then stomp it like when using a shovel.   It is a very fun and easy way to make a  moving mount on your ripstick it should only take you an hour or two to master. . Video it can be done in many variations for i...
By: the_burrito_master

Continue Reading »]]>
Sun, 1 Aug 2010 15:13:02 PDT