http://www.instructables.com Sun, 27 May 2012 21:49:05 PDT BLOX v1.01 http://www.instructables.com/id/Configuration-KNEX-Ball-Machine/
Configuration - KNEX Ball Machine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOL/2DAI/H2MYM0NZ/FOL2DAIH2MYM0NZ.SQUARE2.jpg http://img.instructables.com/files/deriv/FOL/2DAI/H2MYM0NZ/FOL2DAIH2MYM0NZ.SQUARE.jpg http://img.instructables.com/files/deriv/FOL/2DAI/H2MYM0NZ/FOL2DAIH2MYM0NZ.SMALL.jpg collinjo12 This is my most complex (not biggest) KNEX ball machine up to date. It features Sathoty's circle lift, two networks, six paths, and new elements. HERE'S THE VIDEO: White Floor and Network Start-Up This is the white floor where balls (not from paths 2 & 3) land here and bouncy off rubber band...
By: collinjo12

Continue Reading »]]> Sun, 27 May 2012 19:07:05 PDT http://www.instructables.com/id/KNEX-Small-Truck-With-Steering-Engine-Component-a/ http://img.instructables.com/files/deriv/FLZ/THZX/H2MYFZWV/FLZTHZXH2MYFZWV.SQUARE2.jpg http://img.instructables.com/files/deriv/FLZ/THZX/H2MYFZWV/FLZTHZXH2MYFZWV.SQUARE.jpg http://img.instructables.com/files/deriv/FLZ/THZX/H2MYFZWV/FLZTHZXH2MYFZWV.SMALL.jpg MR.CbaTbh This is my fourth instructable, and hopefully my best so far. My new truck has a steering system, engine and transmission. The transmission I have used gives the rear wheels a lot of speed out of the small engine, though a little less torque. It could be improved by putting differential on the rear ...
By: MR.CbaTbh

Continue Reading »]]> Sun, 27 May 2012 03:44:00 PDT http://www.instructables.com/id/A-Basic-K-Nex-Diesel-Train-Chassis/ http://img.instructables.com/files/deriv/F58/9528/H2MYK30B/F589528H2MYK30B.SQUARE2.jpg http://img.instructables.com/files/deriv/F58/9528/H2MYK30B/F589528H2MYK30B.SQUARE.jpg http://img.instructables.com/files/deriv/F58/9528/H2MYK30B/F589528H2MYK30B.SMALL.jpg nevthebluebear A Basis chassis with 2 bogies, 4 wheels on each, EACH set of wheels has its own KNEX Standard motor, For easy use All motors have been wired up on to 1 switch.
By: nevthebluebear

Continue Reading »]]> Sun, 27 May 2012 01:13:05 PDT http://www.instructables.com/id/KNEX-Strong-Vintage-Van-With-Double-Steering/ http://img.instructables.com/files/deriv/FJD/SP9P/H2MYDGMI/FJDSP9PH2MYDGMI.SQUARE2.jpg http://img.instructables.com/files/deriv/FJD/SP9P/H2MYDGMI/FJDSP9PH2MYDGMI.SQUARE.jpg http://img.instructables.com/files/deriv/FJD/SP9P/H2MYDGMI/FJDSP9PH2MYDGMI.SMALL.jpg MR.CbaTbh This is my second instructable. It is a van that has four-wheel steering, and is strong. Plus the mechanism for the steering does not break easily. In these pictures the steering wheel is located inside the van, but can easily be lengthened and made easier to access. It even has a very small amount ...
By: MR.CbaTbh

Continue Reading »]]> Sat, 26 May 2012 16:00:20 PDT http://www.instructables.com/id/KNEX-Small-Pointless-But-Very-Fast-Racing-Car/ http://img.instructables.com/files/deriv/F4Y/7HVJ/H2MYJYV1/F4Y7HVJH2MYJYV1.SQUARE2.jpg http://img.instructables.com/files/deriv/F4Y/7HVJ/H2MYJYV1/F4Y7HVJH2MYJYV1.SQUARE.jpg http://img.instructables.com/files/deriv/F4Y/7HVJ/H2MYJYV1/F4Y7HVJH2MYJYV1.SMALL.jpg MR.CbaTbh This is my third instructable. This car is surprisingly quick and has high torque and acceleration. Having two wind up motors and a very light and small body is mainly the reason for this. The body is also very strong, and can survive a large fall.. I hope to improve it by  putting gears into it to ...
By: MR.CbaTbh

Continue Reading »]]> Sat, 26 May 2012 11:39:53 PDT http://www.instructables.com/id/Spinning-Free-Fall-Lift-a-new-knex-ball-machine-l/
Spinning Free Fall Lift, a new knex ball machine lift - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNR/6NVC/H1YOB85N/FNR6NVCH1YOB85N.SQUARE2.jpg http://img.instructables.com/files/deriv/FNR/6NVC/H1YOB85N/FNR6NVCH1YOB85N.SQUARE.jpg http://img.instructables.com/files/deriv/FNR/6NVC/H1YOB85N/FNR6NVCH1YOB85N.SMALL.jpg sandroknexmaster Hi everyone Here the instructions for the new lift in my knex ball machine Dragonfire. I have changed the lift a little bit, more exactly the entrance. In the vid of Dragonfire, you can see that there are several balls rolling to the arm at the same time, but the arm can lift only one ball at time,...
By: sandroknexmaster

Continue Reading »]]> Sat, 26 May 2012 06:52:34 PDT http://www.instructables.com/id/Knex-small-wheel-lift/
Knex small wheel lift - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8C/O8TJ/H2BMNLR4/F8CO8TJH2BMNLR4.SQUARE2.jpg http://img.instructables.com/files/deriv/F8C/O8TJ/H2BMNLR4/F8CO8TJH2BMNLR4.SQUARE.jpg http://img.instructables.com/files/deriv/F8C/O8TJ/H2BMNLR4/F8CO8TJH2BMNLR4.SMALL.jpg Sorunome Hey, this is my newest lift I made, well, in fact it is a pretty old lift but I wanted to make instructions of it ever since I made my ball machine Crazy, and here it is finally! It is a lot better than that version :D Credits to Shadowman for originally inventing this lift in Cataclysm. For more co...
By: Sorunome

Continue Reading »]]> Fri, 25 May 2012 18:09:51 PDT http://www.instructables.com/id/KNEX-Small-Convertible-Car-With-Steering/ http://img.instructables.com/files/deriv/FR7/V4AS/H2MYLLPV/FR7V4ASH2MYLLPV.SQUARE2.jpg http://img.instructables.com/files/deriv/FR7/V4AS/H2MYLLPV/FR7V4ASH2MYLLPV.SQUARE.jpg http://img.instructables.com/files/deriv/FR7/V4AS/H2MYLLPV/FR7V4ASH2MYLLPV.SMALL.jpg MR.CbaTbh This is my first instructable, it needs a few improvements.. I will post if many people want me to:) I want to try and improve this car by putting some sort of suspension on the front wheels and fitting a back axle with engine, but I am not sure how I could. I hope someone manages to do it if they f...
By: MR.CbaTbh

Continue Reading »]]> Fri, 25 May 2012 09:40:23 PDT http://www.instructables.com/id/Knex-Transforming-Baby-Face-To-Headless-Robot/
K'nex Transforming 'Baby Face' To Headless Robot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FI6/MHPS/H1YOJBPY/FI6MHPSH1YOJBPY.SQUARE2.jpg http://img.instructables.com/files/deriv/FI6/MHPS/H1YOJBPY/FI6MHPSH1YOJBPY.SQUARE.jpg http://img.instructables.com/files/deriv/FI6/MHPS/H1YOJBPY/FI6MHPSH1YOJBPY.SMALL.jpg super knex builder This 'transformer' I made was going to be called knex robot, but then I made it transform and changed the head so it looked like Baby Face from Bat-Man. I entered this in the "make it real challenge" so vote if you like it! This my 2nd instructable, so leave some helpful hints from you veterans who ...
By: super knex builder

Continue Reading »]]> Thu, 24 May 2012 13:29:22 PDT http://www.instructables.com/id/KNEX-Crossbow-V10-Work-in-progress/ http://img.instructables.com/files/deriv/FN3/K6C1/H27LSP32/FN3K6C1H27LSP32.SQUARE2.jpg http://img.instructables.com/files/deriv/FN3/K6C1/H27LSP32/FN3K6C1H27LSP32.SQUARE.jpg http://img.instructables.com/files/deriv/FN3/K6C1/H27LSP32/FN3K6C1H27LSP32.SMALL.jpg F4T4L1TY Hello people today I started working on my first KNEX weapon in the instructables armory. To make a long story short, I'd like you to take a look at version 1. Ill try to post an update every week. Please comment.
By: F4T4L1TY

Continue Reading »]]> Tue, 22 May 2012 15:45:53 PDT http://www.instructables.com/id/Colt-Armys-update-from-the-Colt-navy/ http://img.instructables.com/files/deriv/FBK/2B45/H1ZG8HN9/FBK2B45H1ZG8HN9.SQUARE2.jpg http://img.instructables.com/files/deriv/FBK/2B45/H1ZG8HN9/FBK2B45H1ZG8HN9.SQUARE.jpg http://img.instructables.com/files/deriv/FBK/2B45/H1ZG8HN9/FBK2B45H1ZG8HN9.SMALL.jpg lukewilliams010 These are my two Colt's . its a little stronger than the navy version on the barrel due to added pieces  they are really fun to spin . if you havent seen my colt spinning video check that out!!! anyway i have pictures ready to post for the instructions if there is a high regard for these twins :P
By: lukewilliams010

Continue Reading »]]> Tue, 22 May 2012 15:45:53 PDT http://www.instructables.com/id/wiivideo-game-stand/ http://img.instructables.com/files/deriv/F49/Q8LW/GDRPTQJS/F49Q8LWGDRPTQJS.SQUARE2.jpg http://img.instructables.com/files/deriv/F49/Q8LW/GDRPTQJS/F49Q8LWGDRPTQJS.SQUARE.jpg http://img.instructables.com/files/deriv/F49/Q8LW/GDRPTQJS/F49Q8LWGDRPTQJS.SMALL.jpg science22 this is my wii stand with video game storage .for instrucables comment 
By: science22

Continue Reading »]]> Sun, 20 May 2012 19:27:38 PDT http://www.instructables.com/id/Knex-Welding-Mask/ http://img.instructables.com/files/deriv/FWB/Y8YX/GUKAR430/FWBY8YXGUKAR430.SQUARE2.jpg http://img.instructables.com/files/deriv/FWB/Y8YX/GUKAR430/FWBY8YXGUKAR430.SQUARE.jpg http://img.instructables.com/files/deriv/FWB/Y8YX/GUKAR430/FWBY8YXGUKAR430.SMALL.jpg nerd97 I built originally built this mask for saftey when testing experimental k'nex guns. When I finished, i noticed that it closely resembled one of the saftey masks welders wear. I will not post instructions because I think the pictures are pretty self-explanatory. I will say that not every part used co...
By: nerd97

Continue Reading »]]> Sun, 20 May 2012 19:27:37 PDT http://www.instructables.com/id/KnexIts-Stick-Grenade/
KnexIt's Stick Grenade - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FP9/IDJ0/H2G5ZWC1/FP9IDJ0H2G5ZWC1.SQUARE2.jpg http://img.instructables.com/files/deriv/FP9/IDJ0/H2G5ZWC1/FP9IDJ0H2G5ZWC1.SQUARE.jpg http://img.instructables.com/files/deriv/FP9/IDJ0/H2G5ZWC1/FP9IDJ0H2G5ZWC1.SMALL.jpg KnexIt This is my stick grenade + the instructables. I kinda took this from call of duty...kinda. Pieces you will need: Piece list: Two wheels of you're own picked size. Rods: 1gray rod 16 blue rods Connecters: 1 tan connecter (You can decide how much shrapnel you will put in, as well as what kind you...
By: KnexIt

Continue Reading »]]> Sun, 20 May 2012 17:20:01 PDT http://www.instructables.com/id/Knex-FAMAS-G2-1/ http://img.instructables.com/files/deriv/FZQ/DAF3/H1YOIRUC/FZQDAF3H1YOIRUC.SQUARE2.jpg http://img.instructables.com/files/deriv/FZQ/DAF3/H1YOIRUC/FZQDAF3H1YOIRUC.SQUARE.jpg http://img.instructables.com/files/deriv/FZQ/DAF3/H1YOIRUC/FZQDAF3H1YOIRUC.SMALL.jpg dr. richtofen Hello everybody! This is my FAMAS G2 model.(Fusil d'Assaut de la Manufacture d'Armes de Saint-Étienne) I finished it yesterday. It doesn't shoot, but let's see some of it's features: - Pretty good Looks (IMO) - Pretty comfortable (with foregrip attached) - Full size - Moving charging handle - Moving...
By: dr. richtofen

Continue Reading »]]> Sun, 20 May 2012 17:20:01 PDT http://www.instructables.com/id/KnexIts-Knife-and-Short-Sword/ http://img.instructables.com/files/deriv/FUP/OEM0/H21CGM71/FUPOEM0H21CGM71.SQUARE2.jpg http://img.instructables.com/files/deriv/FUP/OEM0/H21CGM71/FUPOEM0H21CGM71.SQUARE.jpg http://img.instructables.com/files/deriv/FUP/OEM0/H21CGM71/FUPOEM0H21CGM71.SMALL.jpg KnexIt Here's my K'nex knife and short-sword. They are better than most of the knives I've seen on Instructables (no offense to any one who has made a knife, and notice I said most)
By: KnexIt

Continue Reading »]]> Sun, 20 May 2012 17:20:01 PDT http://www.instructables.com/id/how-to-make-a-knex-abacussoraban/
how to make a knex abacus/soraban - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FN1/6EVP/H2G5ZX5X/FN16EVPH2G5ZX5X.SQUARE2.jpg http://img.instructables.com/files/deriv/FN1/6EVP/H2G5ZX5X/FN16EVPH2G5ZX5X.SQUARE.jpg http://img.instructables.com/files/deriv/FN1/6EVP/H2G5ZX5X/FN16EVPH2G5ZX5X.SMALL.jpg indyjoe This is the abacus/soraban I made a few days ago. It works well, and I like it. PARTS LIST. 21 green rods 8 white rods 8 yellow rods 36 gray 4 slot connectors 6 blue 7 slot connectors 8 blue spacers 32 gray spacers 1. connect 2. make 3. make 4. make 5. connect 6. connect It's done!...
By: indyjoe

Continue Reading »]]> Sun, 20 May 2012 17:08:00 PDT http://www.instructables.com/id/KnexIts-Walther-PPK/
KnexIt's Walther PPK - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FE9/FBNJ/H1ZG7Y8Y/FE9FBNJH1ZG7Y8Y.SQUARE2.jpg http://img.instructables.com/files/deriv/FE9/FBNJ/H1ZG7Y8Y/FE9FBNJH1ZG7Y8Y.SQUARE.jpg http://img.instructables.com/files/deriv/FE9/FBNJ/H1ZG7Y8Y/FE9FBNJH1ZG7Y8Y.SMALL.jpg KnexIt Here's my PPK (its not as good as dr. richtofen's). Pices of gun Here are the pieces that you will need to make to make the gun. Handle + Left side of gun/chamber Now, attach the left side of the chamber to the handle. Front part of barrel Now put the front part of barrel on the left side ...
By: KnexIt

Continue Reading »]]> Sun, 20 May 2012 15:26:43 PDT http://www.instructables.com/id/MP5-1/
MP5 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2I/G4VO/H21CGLKO/F2IG4VOH21CGLKO.SQUARE2.jpg http://img.instructables.com/files/deriv/F2I/G4VO/H21CGLKO/F2IG4VOH21CGLKO.SQUARE.jpg http://img.instructables.com/files/deriv/F2I/G4VO/H21CGLKO/F2IG4VOH21CGLKO.SMALL.jpg KnexIt This is from Modern Warfare: Mobilized (DS). It is meant to look like the very first pic.(:) My MP5! This is my MP5! Body The body/chamber is the same as ZeroGravity9's. So, just go to his ible on the M4A1, and you'll get it. :P The Clip system is the same, but instead of having a white rod be...
By: KnexIt

Continue Reading »]]> Sat, 19 May 2012 12:41:06 PDT http://www.instructables.com/id/prototype-claws/
[prototype] claws - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FQP/01W6/H29XSCSN/FQP01W6H29XSCSN.SQUARE2.jpg http://img.instructables.com/files/deriv/FQP/01W6/H29XSCSN/FQP01W6H29XSCSN.SQUARE.jpg http://img.instructables.com/files/deriv/FQP/01W6/H29XSCSN/FQP01W6H29XSCSN.SMALL.jpg the-dutch-guy hey guys Here is my first instructable hope you like it rate a good five stars for more and don't forget to subscibe make evereything you're done
By: the-dutch-guy

Continue Reading »]]> Wed, 16 May 2012 18:38:54 PDT http://www.instructables.com/id/quick-reload-assault-handgun/
quick reload assault handgun - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F8F/PDFD/H27LRMWV/F8FPDFDH27LRMWV.SQUARE2.jpg http://img.instructables.com/files/deriv/F8F/PDFD/H27LRMWV/F8FPDFDH27LRMWV.SQUARE.jpg http://img.instructables.com/files/deriv/F8F/PDFD/H27LRMWV/F8FPDFDH27LRMWV.SMALL.jpg The cameraman this handgun is powerfull and easy to load, which helps for battles. this gun takes around 1-2 seconds while others take much longer. :D however, this is not intended for use in grass because this shoots the small green/black rods. ;( outsides of gun here you will make the outsides of the gun. D...
By: The cameraman

Continue Reading »]]> Tue, 15 May 2012 11:53:21 PDT http://www.instructables.com/id/MP5K-instructions/
MP5K instructions - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5V/OC5H/H29XRVH4/F5VOC5HH29XRVH4.SQUARE2.jpg http://img.instructables.com/files/deriv/F5V/OC5H/H29XRVH4/F5VOC5HH29XRVH4.SQUARE.jpg http://img.instructables.com/files/deriv/F5V/OC5H/H29XRVH4/F5VOC5HH29XRVH4.SMALL.jpg Johnhall44 Well, here is my mp5k instructions so start building =D dont forget to rate =D Body of the gun This shouldnt be to hard, just follow the steps =D Front grip Just follow the pics =D mag release continue to follow the pics =D Trigger follow =D Rest of the gun  YAY This is the last step ...
By: Johnhall44

Continue Reading »]]> Mon, 14 May 2012 16:58:43 PDT http://www.instructables.com/id/Knex-true-bolt-action-pistol-instructions/
K'nex true bolt action pistol (instructions) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5T/587E/H1YOL8XO/F5T587EH1YOL8XO.SQUARE2.jpg http://img.instructables.com/files/deriv/F5T/587E/H1YOL8XO/F5T587EH1YOL8XO.SQUARE.jpg http://img.instructables.com/files/deriv/F5T/587E/H1YOL8XO/F5T587EH1YOL8XO.SMALL.jpg dr. richtofen Hello! These are the instructions to make my bolt action pistol. It's I believe the first ''true bolt action'' pistol on this site. With that I mean, you pull the bolt, then push it back to load a round. Credit goes to Kinetic for helping me on some parts. (he improved the bullet ramp, and made the...
By: dr. richtofen

Continue Reading »]]> Mon, 14 May 2012 16:58:42 PDT http://www.instructables.com/id/Knex-Parallel-Arm-Lift/
Knex Parallel Arm Lift - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1B/697F/H1YOKIIW/F1B697FH1YOKIIW.SQUARE2.jpg http://img.instructables.com/files/deriv/F1B/697F/H1YOKIIW/F1B697FH1YOKIIW.SQUARE.jpg http://img.instructables.com/files/deriv/F1B/697F/H1YOKIIW/F1B697FH1YOKIIW.SMALL.jpg Sorunome Here is my newest lift: the Parallel arm lift! Most credits go to Shadowman, as he invented this lift first in his unfinished ball machine, I tried to rebuild it from the vid (only managed to rebuild the front part of the arm and some basic ideas). So, this instruction is very complicated and nothin...
By: Sorunome

Continue Reading »]]> Fri, 11 May 2012 05:37:49 PDT http://www.instructables.com/id/knex-ballmachine-runway-update/ http://img.instructables.com/files/deriv/F65/0HNJ/H21MJFGP/F650HNJH21MJFGP.SQUARE2.jpg http://img.instructables.com/files/deriv/F65/0HNJ/H21MJFGP/F650HNJH21MJFGP.SQUARE.jpg http://img.instructables.com/files/deriv/F65/0HNJ/H21MJFGP/F650HNJH21MJFGP.SMALL.jpg jameshond hello here is my new ballmachine runway update there are 5 lifts 3 networks and 7 paths lifts semi circle lift chain lift 2x ball launcher arm lift the last 6 pics are from the ball launcher
By: jameshond

Continue Reading »]]> Thu, 10 May 2012 10:05:54 PDT http://www.instructables.com/id/Knex-Scar-l-CQC-v2/ http://img.instructables.com/files/deriv/F2U/Q6BS/H1YOKGH8/F2UQ6BSH1YOKGH8.SQUARE2.jpg http://img.instructables.com/files/deriv/F2U/Q6BS/H1YOKGH8/F2UQ6BSH1YOKGH8.SQUARE.jpg http://img.instructables.com/files/deriv/F2U/Q6BS/H1YOKGH8/F2UQ6BSH1YOKGH8.SMALL.jpg CODawesome Hey guys, this is my Scar-l CQC which is basically redone. I added a better looking barrel with top and bottom rails, a more curvable magazine, and a different barrel extension. Here are some pros and cons: Pros: -looks and feels good -top and bottom rails for attachments -retractable stock with 4 ...
By: CODawesome

Continue Reading »]]> Tue, 8 May 2012 11:47:05 PDT http://www.instructables.com/id/knex-m200-intervention/ http://img.instructables.com/files/deriv/FRO/8YI5/H1YOAXFN/FRO8YI5H1YOAXFN.SQUARE2.jpg http://img.instructables.com/files/deriv/FRO/8YI5/H1YOAXFN/FRO8YI5H1YOAXFN.SQUARE.jpg http://img.instructables.com/files/deriv/FRO/8YI5/H1YOAXFN/FRO8YI5H1YOAXFN.SMALL.jpg verekte2 the m200 intervention! this gun will post if i have time don't forget to rate and subscribe
By: verekte2

Continue Reading »]]> Tue, 8 May 2012 11:47:05 PDT http://www.instructables.com/id/knex-usas-12/ http://img.instructables.com/files/deriv/FX2/71HP/H1YOAXFE/FX271HPH1YOAXFE.SQUARE2.jpg http://img.instructables.com/files/deriv/FX2/71HP/H1YOAXFE/FX271HPH1YOAXFE.SQUARE.jpg http://img.instructables.com/files/deriv/FX2/71HP/H1YOAXFE/FX271HPH1YOAXFE.SMALL.jpg verekte2 the usas 12.... this gun won't be post because it's already broken up don't forget to rate and subscribe
By: verekte2

Continue Reading »]]> Tue, 8 May 2012 11:47:05 PDT http://www.instructables.com/id/Knex-Alternating-Arm-Lift/
Knex Alternating Arm Lift - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFH/FMJG/H1EN6V82/FFHFMJGH1EN6V82.SQUARE2.jpg http://img.instructables.com/files/deriv/FFH/FMJG/H1EN6V82/FFHFMJGH1EN6V82.SQUARE.jpg http://img.instructables.com/files/deriv/FFH/FMJG/H1EN6V82/FFHFMJGH1EN6V82.SMALL.jpg Tornado96 Hey Peeps! Tornado96 and Shadowman39 are proud to present our first collaboration: the Alternating Arm Lift! This lift uses the concept behind Shadowman's Alternator Lift. However, the "alternators" are attached to arms, making it transport the balls a lot quicker. It also has concepts found in the...
By: Tornado96

Continue Reading »]]> Mon, 7 May 2012 18:31:25 PDT http://www.instructables.com/id/Knex-Flatbed-2/
K'nex Flatbed - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEP/LG3R/H1JUHJKS/FEPLG3RH1JUHJKS.SQUARE2.jpg http://img.instructables.com/files/deriv/FEP/LG3R/H1JUHJKS/FEPLG3RH1JUHJKS.SQUARE.jpg http://img.instructables.com/files/deriv/FEP/LG3R/H1JUHJKS/FEPLG3RH1JUHJKS.SMALL.jpg binglebeebop Flatbed carrier for all your constructed freight. Enjoy Materials Please note, this list is for the frame only, not the cab. This is because i find my cab a tad bit ugly, and i'd like to allow you to creat your own. However, the parts list and Instructable for the cab will follow the chassis. Im...
By: binglebeebop

Continue Reading »]]> Mon, 7 May 2012 15:31:34 PDT http://www.instructables.com/id/If-anyone-is-still-alivei-need-your-help/ http://img.instructables.com/files/deriv/FX3/XWT1/GFA3Z0BP/FX3XWT1GFA3Z0BP.SQUARE2.jpg http://img.instructables.com/files/deriv/FX3/XWT1/GFA3Z0BP/FX3XWT1GFA3Z0BP.SQUARE.jpg http://img.instructables.com/files/deriv/FX3/XWT1/GFA3Z0BP/FX3XWT1GFA3Z0BP.SMALL.jpg knexfreak95 i cant figure out for the life of me what to do to my V8 diesel engine (fill up the middle) if anyone could give some tips or reference photos it would be nice (gotta finish for a school project) 
By: knexfreak95

Continue Reading »]]> Mon, 7 May 2012 13:20:15 PDT http://www.instructables.com/id/Knex-Franchi-SPAS-12/ http://img.instructables.com/files/deriv/F1G/FDOV/H1Y0EGE0/F1GFDOVH1Y0EGE0.SQUARE2.jpg http://img.instructables.com/files/deriv/F1G/FDOV/H1Y0EGE0/F1GFDOVH1Y0EGE0.SQUARE.jpg http://img.instructables.com/files/deriv/F1G/FDOV/H1Y0EGE0/F1GFDOVH1Y0EGE0.SMALL.jpg BlackShadow12 Finally after many attempts, I've done it. A SPAS-12. :) Pros: Looks awesome Functions great Very sturdy when the buttstock is folded Holds 8 rounds just like the real thing Cons: Can't pull the pin back when the stock is folded Buttstock is a bit flimsy when its unfolded Doesn't pump Not complet...
By: BlackShadow12

Continue Reading »]]> Sat, 5 May 2012 16:47:22 PDT http://www.instructables.com/id/Knex-Slamfire-Burst-Rifle-The-K2-v2/
K'nex Slamfire Burst Rifle: The K2 v.2 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FCH/ZIOD/GXL667OM/FCHZIODGXL667OM.SQUARE2.jpg http://img.instructables.com/files/deriv/FCH/ZIOD/GXL667OM/FCHZIODGXL667OM.SQUARE.jpg http://img.instructables.com/files/deriv/FCH/ZIOD/GXL667OM/FCHZIODGXL667OM.SMALL.jpg Kinetic Hello Instructables community!  Kinetic here with my newest in a line of innovative K'nex guns: The K2 v.2. A gun much unlike any other, the K2 v.2 utilizes a two-stage handle pump to fire four shots consecutively with each pump at a range of 20-30 feet.  No firing pins, no triggers, just push, pul...
By: Kinetic

Continue Reading »]]> Sat, 5 May 2012 12:46:03 PDT http://www.instructables.com/id/Small-Knex-Wheel-Lift/
Small Knex Wheel Lift - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F81/7UUD/H1JUH1MQ/F817UUDH1JUH1MQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F81/7UUD/H1JUH1MQ/F817UUDH1JUH1MQ.SQUARE.jpg http://img.instructables.com/files/deriv/F81/7UUD/H1JUH1MQ/F817UUDH1JUH1MQ.SMALL.jpg Sorunome Hey there, this is the small knex wheel lift I used in my ball machine Dystopia underneath the white floor. Be sure to read image notes while building along! I hope you like it! Be sure to comment, rate and subscribe! Check out my Website for even more cool stuff! The base First it's time to...
By: Sorunome

Continue Reading »]]> Fri, 4 May 2012 12:33:57 PDT http://www.instructables.com/id/Knex-mini-transformer-tank/
K'nex mini transformer tank - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOZ/IL7N/H1JUJJYH/FOZIL7NH1JUJJYH.SQUARE2.jpg http://img.instructables.com/files/deriv/FOZ/IL7N/H1JUJJYH/FOZIL7NH1JUJJYH.SQUARE.jpg http://img.instructables.com/files/deriv/FOZ/IL7N/H1JUJJYH/FOZIL7NH1JUJJYH.SMALL.jpg instructaguy This is a simple but cool transformer tank, with step to step guides on how to build it, the following piece count does not include the weapons piec count, but they are easy enough to buld anyway. Please comment, rate subscribe, and if you need any help or tips, just ask. Thankz You may have seen...
By: instructaguy

Continue Reading »]]> Fri, 4 May 2012 12:28:51 PDT http://www.instructables.com/id/Knex-Mini-Transformer-Jet/
K'nex Mini Transformer Jet - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FZA/BDIE/H1JUJK08/FZABDIEH1JUJK08.SQUARE2.jpg http://img.instructables.com/files/deriv/FZA/BDIE/H1JUJK08/FZABDIEH1JUJK08.SQUARE.jpg http://img.instructables.com/files/deriv/FZA/BDIE/H1JUJK08/FZABDIEH1JUJK08.SMALL.jpg instructaguy This is another of my mini transformers, with simple guides to build. This is by far my best transformer yet. Hope you enjoy. Please subscribe, comment and rate. Piece count connectors green-  4 orange (brown in the picture)-  1 grey (purple in the picture)-  1 blue (a bit like the tanclip without...
By: instructaguy

Continue Reading »]]> Fri, 4 May 2012 12:28:51 PDT http://www.instructables.com/id/BBR-V1/ http://img.instructables.com/files/deriv/FBQ/1DDB/H1LWQ4WP/FBQ1DDBH1LWQ4WP.SQUARE2.jpg http://img.instructables.com/files/deriv/FBQ/1DDB/H1LWQ4WP/FBQ1DDBH1LWQ4WP.SQUARE.jpg http://img.instructables.com/files/deriv/FBQ/1DDB/H1LWQ4WP/FBQ1DDBH1LWQ4WP.SMALL.jpg Ddddddddddddf BBR-V1 The BBR-V1 (bullpup bolt-action rifle version 1) is a true trigger, true bolt action bullpup rifle. at the moment it is at early stages and does not work very well and is not reliable, although i think it looks quite good. and with some adjustments, it could work very well. It shoots yellow r...
By: Ddddddddddddf

Continue Reading »]]> Fri, 4 May 2012 12:25:25 PDT http://www.instructables.com/id/Knex-double-barrel-break-action-shotgun-3/ http://img.instructables.com/files/deriv/FQV/CJ56/H1LWQM4G/FQVCJ56H1LWQM4G.SQUARE2.jpg http://img.instructables.com/files/deriv/FQV/CJ56/H1LWQM4G/FQVCJ56H1LWQM4G.SQUARE.jpg http://img.instructables.com/files/deriv/FQV/CJ56/H1LWQM4G/FQVCJ56H1LWQM4G.SMALL.jpg H1T4TCH1 Check out my Knex Gearbox too! Hey guys! I finally touched Knex after weeks of inactivity. Because I was in the middle of a vacation I had the time and Battlefield 3 bored me for a second. So, here it is: An amazing double barrel break action shotgun! This massive shotgun features a pin guide, c...
By: H1T4TCH1

Continue Reading »]]> Fri, 4 May 2012 12:23:17 PDT http://www.instructables.com/id/Knex-ballmachine-motorized-madness-circle-lift/
K'nex ballmachine motorized madness circle lift. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FOT/CFI4/H1JUJDXV/FOTCFI4H1JUJDXV.SQUARE2.jpg http://img.instructables.com/files/deriv/FOT/CFI4/H1JUJDXV/FOTCFI4H1JUJDXV.SQUARE.jpg http://img.instructables.com/files/deriv/FOT/CFI4/H1JUJDXV/FOTCFI4H1JUJDXV.SMALL.jpg sathothy Welcome to my first instruction Ible! Its about my new lift the ''motorized madness circle lift''. You may think ''why that name''. Well I'm very bad whit name's and since the green half circle is made whit the green track from the track from the motorized madness ballmachine. I decided to give i...
By: sathothy

Continue Reading »]]> Fri, 4 May 2012 09:17:37 PDT http://www.instructables.com/id/Knex-gun-Super-Kriss-Vector/ http://img.instructables.com/files/deriv/FTM/U3UJ/H1KHAJU4/FTMU3UJH1KHAJU4.SQUARE2.jpg http://img.instructables.com/files/deriv/FTM/U3UJ/H1KHAJU4/FTMU3UJH1KHAJU4.SQUARE.jpg http://img.instructables.com/files/deriv/FTM/U3UJ/H1KHAJU4/FTMU3UJH1KHAJU4.SMALL.jpg Senior Waffleman Hey, so this is the first from the list of recommendations, the recommendations list will be in the forums now, because i cant have it as photos, but anyways, here is the the vector, idea by Bwbt1, i have tried my best on this, it is a very complex one,but i managed to make it work. -Link to forum ...
By: Senior Waffleman

Continue Reading »]]> Wed, 2 May 2012 11:20:16 PDT http://www.instructables.com/id/knex-zig-zag-panel-drop-element/ http://img.instructables.com/files/deriv/F2R/HJ6B/H1QML3TL/F2RHJ6BH1QML3TL.SQUARE2.jpg http://img.instructables.com/files/deriv/F2R/HJ6B/H1QML3TL/F2RHJ6BH1QML3TL.SQUARE.jpg http://img.instructables.com/files/deriv/F2R/HJ6B/H1QML3TL/F2RHJ6BH1QML3TL.SMALL.jpg jameshond here is my new knex ball machine element: the zig zag panel drop element you can make it so high as you want. it works with al kinds of knex balls   I hope you can make it from the photo's here are the instructions
By: jameshond

Continue Reading »]]> Wed, 2 May 2012 10:59:59 PDT http://www.instructables.com/id/Knex-Ball-Machine-Dragonfire-new-elements/
Knex Ball Machine: Dragonfire, new elements - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0Q/N42R/H1KH9Z43/F0QN42RH1KH9Z43.SQUARE2.jpg http://img.instructables.com/files/deriv/F0Q/N42R/H1KH9Z43/F0QN42RH1KH9Z43.SQUARE.jpg http://img.instructables.com/files/deriv/F0Q/N42R/H1KH9Z43/F0QN42RH1KH9Z43.SMALL.jpg sandroknexmaster Hi everyone Here are some fotos and instructions of my new elements. You can find them all in my second knex ball machine Dragonfire, if you want to see them working. I hope everything is clear enough, if not feel free to ask. And now let's get building! Multiple ball zigzag Big ferris whe...
By: sandroknexmaster

Continue Reading »]]> Wed, 2 May 2012 10:19:07 PDT http://www.instructables.com/id/knex-rubber-band-launched-micro-roller-coaster/ http://img.instructables.com/files/deriv/FER/OC7T/H1PISYBT/FEROC7TH1PISYBT.SQUARE2.jpg http://img.instructables.com/files/deriv/FER/OC7T/H1PISYBT/FEROC7TH1PISYBT.SQUARE.jpg http://img.instructables.com/files/deriv/FER/OC7T/H1PISYBT/FEROC7TH1PISYBT.SMALL.jpg jameshond this is my firs micro rollercoaster.  I used hanging rollercoaster carts  build time : 3 hours I hope you like it :)
By: jameshond

Continue Reading »]]> Wed, 2 May 2012 04:47:08 PDT http://www.instructables.com/id/A-new-Knex-Grenade/
A new K'nex Grenade! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F89/M8ZJ/H1KHA92R/F89M8ZJH1KHA92R.SQUARE2.jpg http://img.instructables.com/files/deriv/F89/M8ZJ/H1KHA92R/F89M8ZJH1KHA92R.SQUARE.jpg http://img.instructables.com/files/deriv/F89/M8ZJ/H1KHA92R/F89M8ZJH1KHA92R.SMALL.jpg jedijaxson This is my K'nex grenade, It does need some changes though. It doesn't explode far, and it takes a med-long time to rebuild. But it does look cool! Get The Plastic! Get your stuff. Read the list or look at the pics, or both. You decide! )){CONNECTORS} x16 Green connectors and x2 Metallic greens. ...
By: jedijaxson

Continue Reading »]]> Tue, 1 May 2012 10:43:47 PDT http://www.instructables.com/id/Knex-TRUE-Bolt-action-pistol-/ http://img.instructables.com/files/deriv/FI0/KPJJ/H1PIT2F7/FI0KPJJH1PIT2F7.SQUARE2.jpg http://img.instructables.com/files/deriv/FI0/KPJJ/H1PIT2F7/FI0KPJJH1PIT2F7.SQUARE.jpg http://img.instructables.com/files/deriv/FI0/KPJJ/H1PIT2F7/FI0KPJJH1PIT2F7.SMALL.jpg dr. richtofen Hello everybody. This is what I believe the first True Bolt Action pistol made out of k'nex. It is still in prototype phase, but I managed to get 20~30 feet with one, not tight rubberband. Some stats: - Handle fed magazine - true trigger - true bolt action - pretty far ram pull - shoots white rods -...
By: dr. richtofen

Continue Reading »]]> Tue, 1 May 2012 10:43:46 PDT http://www.instructables.com/id/Knex-Ball-Machine-Dystopia/ http://img.instructables.com/files/deriv/F59/D8DS/H1ERNDIS/F59D8DSH1ERNDIS.SQUARE2.jpg http://img.instructables.com/files/deriv/F59/D8DS/H1ERNDIS/F59D8DSH1ERNDIS.SQUARE.jpg http://img.instructables.com/files/deriv/F59/D8DS/H1ERNDIS/F59D8DSH1ERNDIS.SMALL.jpg Sorunome Here it finally is: My ball machine Dystopia! Below are some pics of it. To view the full gallery and to see more info please visit my website! Sorry about the low quality vid, I'll upload a HQ one as soon as I find out how to render HD videos with kdenlive...  
By: Sorunome

Continue Reading »]]> Mon, 30 Apr 2012 09:55:54 PDT http://www.instructables.com/id/Saw-Trap-Reverse-Bear-TrapPOSTED/
Saw 1-6 Reverse Bear Trap *POSTED* - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0F/QCSG/H01N5YHU/F0FQCSGH01N5YHU.SQUARE2.jpg http://img.instructables.com/files/deriv/F0F/QCSG/H01N5YHU/F0FQCSGH01N5YHU.SQUARE.jpg http://img.instructables.com/files/deriv/F0F/QCSG/H01N5YHU/F0FQCSGH01N5YHU.SMALL.jpg rheath2 So...you will finally get to know what will really make your jaw RIP!!!!!!!! LOL get it because I said rip instead of drop. Haha get it ha yeah.......................................IT'S A DUMB JOKE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Top Head Clamp ...
By: rheath2

Continue Reading »]]> Sun, 29 Apr 2012 16:11:45 PDT http://www.instructables.com/id/Knex-Buggies/ http://img.instructables.com/files/deriv/FNR/13GH/H1JUI8EL/FNR13GHH1JUI8EL.SQUARE2.jpg http://img.instructables.com/files/deriv/FNR/13GH/H1JUI8EL/FNR13GHH1JUI8EL.SQUARE.jpg http://img.instructables.com/files/deriv/FNR/13GH/H1JUI8EL/FNR13GHH1JUI8EL.SMALL.jpg JBomBer94 besides the front there twins, the A arms one was exactly like the other with trailing arms but wanted to change it
By: JBomBer94

Continue Reading »]]> Sat, 28 Apr 2012 14:02:30 PDT http://www.instructables.com/id/The-iPad-3-Stand/
K'NEX iPad 3 Stand - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FKH/KK4Y/H1JUDZLH/FKHKK4YH1JUDZLH.SQUARE2.jpg http://img.instructables.com/files/deriv/FKH/KK4Y/H1JUDZLH/FKHKK4YH1JUDZLH.SQUARE.jpg http://img.instructables.com/files/deriv/FKH/KK4Y/H1JUDZLH/FKHKK4YH1JUDZLH.SMALL.jpg FlyingFish10 Hello. This is the stand I made for the new iPad 3. This is also my first instructable. Note: I do not know if this will work with the original iPad or the iPad 2. Pros: -Sturdy -Secure -All buttons still accessible -Nice incline for watching videos and typing -Easy to slide iPad in and out -Relat...
By: FlyingFish10

Continue Reading »]]> Sat, 28 Apr 2012 13:58:00 PDT http://www.instructables.com/id/KNex-P226/ http://img.instructables.com/files/deriv/F1P/WXJN/H0FLIY31/F1PWXJNH0FLIY31.SQUARE2.jpg http://img.instructables.com/files/deriv/F1P/WXJN/H0FLIY31/F1PWXJNH0FLIY31.SQUARE.jpg http://img.instructables.com/files/deriv/F1P/WXJN/H0FLIY31/F1PWXJNH0FLIY31.SMALL.jpg shadowhavick spy pistol that was used in james bond casino royal
By: shadowhavick

Continue Reading »]]> Sat, 28 Apr 2012 09:47:23 PDT