Instructables: exploring - technology - 3D-Printing - 3d printer - reprap - featured http://www.instructables.com Mon, 26 Sep 2016 15:47:21 PDT BLOX v1.01 LCD 3D Printer http://www.instructables.com/id/LCD-3D-Printer/
LCD 3D Printer - More DIY How To Projects]]> https://cdn.instructables.com/FZI/J7GB/IPVHDI8I/FZIJ7GBIPVHDI8I.SQUARE2.jpg https://cdn.instructables.com/FZI/J7GB/IPVHDI8I/FZIJ7GBIPVHDI8I.SQUARE.jpg https://cdn.instructables.com/FZI/J7GB/IPVHDI8I/FZIJ7GBIPVHDI8I.SMALL.jpg lcs5000 I am a fifteen year old who took an interest in 3D printing about two years ago. I tried and failed to build a fused deposition modeling 3D printer. There were too many moving parts that I had issues with. So, I began exploring simpler, less complex printers. I came across the "Olo" smartphone 3D pr...
By: lcs5000

Continue Reading »]]>
Sat, 25 Jun 2016 07:44:28 PDT
3D Printer Extruder/Hot End Upgrade http://www.instructables.com/id/3D-Printer-ExtruderHot-End-Upgrade/
3D Printer Extruder/Hot End Upgrade - More DIY How To Projects]]> https://cdn.instructables.com/FX1/8QMV/IPOA3NPL/FX18QMVIPOA3NPL.SQUARE2.jpg https://cdn.instructables.com/FX1/8QMV/IPOA3NPL/FX18QMVIPOA3NPL.SQUARE.jpg https://cdn.instructables.com/FX1/8QMV/IPOA3NPL/FX18QMVIPOA3NPL.SMALL.jpg arron_mollet22 Another Instructable dedicated to the upgrades on my Velleman K8200 3D printer! Although my base model is a K8200 these upgrades can very easily be adapted to most RepRap printers. The first upgrade I published was adding a heat enclosure with some other great features. You will notice the enclosure...
By: arron_mollet22

Continue Reading »]]>
Mon, 20 Jun 2016 19:56:55 PDT
DIY 3D Printer Enclosure http://www.instructables.com/id/DIY-3D-Printer-Enclosure/
DIY 3D Printer Enclosure - More DIY How To Projects]]> https://cdn.instructables.com/FHV/UX6L/IPMUK022/FHVUX6LIPMUK022.SQUARE2.jpg https://cdn.instructables.com/FHV/UX6L/IPMUK022/FHVUX6LIPMUK022.SQUARE.jpg https://cdn.instructables.com/FHV/UX6L/IPMUK022/FHVUX6LIPMUK022.SMALL.jpg arron_mollet22 I have been the proud owner of a RepRap 3D printer for a few years now, and while its been extremely handy for rapid prototyping I figured it was about time for some upgrades. First thing on my mind was to build an enclosure for the Velleman K8200 model I had been using. There are definitely a numbe...
By: arron_mollet22

Continue Reading »]]>
Wed, 15 Jun 2016 15:56:49 PDT
DIY-SLS-3D-Printer http://www.instructables.com/id/DIY-SLS-3D-Printer/
DIY-SLS-3D-Printer - More DIY How To Projects]]> https://cdn.instructables.com/F3A/OB88/IP91LVRR/F3AOB88IP91LVRR.SQUARE2.jpg https://cdn.instructables.com/F3A/OB88/IP91LVRR/F3AOB88IP91LVRR.SQUARE.jpg https://cdn.instructables.com/F3A/OB88/IP91LVRR/F3AOB88IP91LVRR.SMALL.jpg Vulcaman In this Instruction, I want to show you how to build a DIY Selektive-Laser-Sintering (SLS) 3D-Printer. I am 17 years old and made everything by myself. Since 6 month my big dream was to build up a working SLS-3D-Printer, but there is a problem. The most SLS-3D-Printers are very expensive and only av...
By: Vulcaman

Continue Reading »]]>
Fri, 10 Jun 2016 08:04:06 PDT
The D-Bot, my self made reprap. http://www.instructables.com/id/The-D-Bot-My-Self-Made-Reprap/
The D-Bot, my self made reprap. - More DIY How To Projects]]> https://cdn.instructables.com/FAO/RLTN/IN4P9ESO/FAORLTNIN4P9ESO.SQUARE2.jpg https://cdn.instructables.com/FAO/RLTN/IN4P9ESO/FAORLTNIN4P9ESO.SQUARE.jpg https://cdn.instructables.com/FAO/RLTN/IN4P9ESO/FAORLTNIN4P9ESO.SMALL.jpg AndreasDesmedt After I bought my first printer and began printing for friends, I felt I could use a 2nd printer. Instead of just buying a 2nd one, I came up with the idea to build a reprap. I had a printer, so I could print the parts. You could buy the other parts everywhere on the internet, so that wasn't a probl...
By: AndreasDesmedt

Continue Reading »]]>
Sun, 17 Apr 2016 10:13:23 PDT
Cheapest Wireless 3D Printer - Boltz Megatiete http://www.instructables.com/id/Boltz-Megatitte-a-140-Wireless-RepRap/
Cheapest Wireless 3D Printer - Boltz Megatiete - More DIY How To Projects]]> https://cdn.instructables.com/FIK/AENA/INM7IZMC/FIKAENAINM7IZMC.SQUARE2.jpg https://cdn.instructables.com/FIK/AENA/INM7IZMC/FIKAENAINM7IZMC.SQUARE.jpg https://cdn.instructables.com/FIK/AENA/INM7IZMC/FIKAENAINM7IZMC.SMALL.jpg _Boltz_ *************************************+First Of All , This Instructables had been written By an 16 years old guy...... Not An English Professor , So Please Inform any grammatical Mistake Before Making Fun Of me. :p +And Please do not imitate any of the logo seen in the pictures Most Of them have Cop...
By: _Boltz_

Continue Reading »]]>
Fri, 15 Apr 2016 08:57:12 PDT
TETRIX 3D-Printer http://www.instructables.com/id/Tetrix-3D-Printer/
TETRIX 3D-Printer - More DIY How To Projects]]> https://cdn.instructables.com/FL7/X2M2/IKMV7KJI/FL7X2M2IKMV7KJI.SQUARE2.jpg https://cdn.instructables.com/FL7/X2M2/IKMV7KJI/FL7X2M2IKMV7KJI.SQUARE.jpg https://cdn.instructables.com/FL7/X2M2/IKMV7KJI/FL7X2M2IKMV7KJI.SMALL.jpg k2tech The TETRIX 3D-Printer was designed as an educational tool for middle and high school technology students, robotics teams, and adults. The purpose of constructing the printer is to train people's building, tool usage, electronics, CAD, and programming skills with a single project. You also get a 3D-p...
By: k2tech

Continue Reading »]]>
Sun, 14 Feb 2016 23:32:26 PST
Edge 3D 3.0 - A $200 3D Printer http://www.instructables.com/id/Edge-3D-30-a-200-3D-Printer/
Edge 3D 3.0 - A $200 3D Printer - More DIY How To Projects]]> https://cdn.instructables.com/FEG/A7O5/IK7C7EYM/FEGA7O5IK7C7EYM.SQUARE2.jpg https://cdn.instructables.com/FEG/A7O5/IK7C7EYM/FEGA7O5IK7C7EYM.SQUARE.jpg https://cdn.instructables.com/FEG/A7O5/IK7C7EYM/FEGA7O5IK7C7EYM.SMALL.jpg Zach Sousa Let me just start by saying that this isn't like most "budget" 3D printers. This has all features that a normal one should have; 2 Z axis motors, LCD, and a reliable extruder (Stepstruder MK7). As the title suggests, this project costs less than $200 (USD) to make, with no reused parts. This project...
By: Zach Sousa

Continue Reading »]]>
Mon, 8 Feb 2016 13:41:44 PST
Vulcanus MAX - CoreXY Aluminum Frame 3D Printer Scale UP http://www.instructables.com/id/Vulcanus-MAX-CoreXY-Aluminum-Frame-RepRap-3D-Print/
Vulcanus MAX - CoreXY Aluminum Frame 3D Printer Scale UP - More DIY How To Projects]]> https://cdn.instructables.com/FX5/NOJN/IF4IGE2O/FX5NOJNIF4IGE2O.SQUARE2.jpg https://cdn.instructables.com/FX5/NOJN/IF4IGE2O/FX5NOJNIF4IGE2O.SQUARE.jpg https://cdn.instructables.com/FX5/NOJN/IF4IGE2O/FX5NOJNIF4IGE2O.SMALL.jpg aldricnegrier On May 11, 2015 vulcaman published the Vulcanus V1 3D printer on his instructables channel. Coincidentally reprapalgarve was working on a coreXY project and when we saw Vulcanus V1 we immediately jumped on to the wagon. With the experience we had scaling up the Prusa i3 (called Mega Prusa i3) we red...
By: aldricnegrier

Continue Reading »]]>
Tue, 29 Sep 2015 07:46:40 PDT
Building a 3D Printer Under 299$ http://www.instructables.com/id/Building-a-3D-Printer-Under-299/
Building a 3D Printer Under 299$ - More DIY How To Projects]]> https://cdn.instructables.com/FVQ/CVZD/IEQY5BCA/FVQCVZDIEQY5BCA.SQUARE2.jpg https://cdn.instructables.com/FVQ/CVZD/IEQY5BCA/FVQCVZDIEQY5BCA.SQUARE.jpg https://cdn.instructables.com/FVQ/CVZD/IEQY5BCA/FVQCVZDIEQY5BCA.SMALL.jpg AlmusYang Hello again, remember me? I have published an instructable about how to make a 3d printer under 200$ - Tower Simple XL.It's a low cost, full-featured 3D Printer, and the most important thing is, you don't need any 3Dprinted parts to build the 3D Printer. If I have a 3D printer,I don't have to look a...
By: AlmusYang

Continue Reading »]]>
Sun, 30 Aug 2015 08:49:47 PDT
Building a 3D Printer Under 200$ http://www.instructables.com/id/Building-a-3D-Printer-Under-200/
Building a 3D Printer Under 200$ - More DIY How To Projects]]> https://cdn.instructables.com/FCJ/38EH/I941D8R7/FCJ38EHI941D8R7.SQUARE2.jpg https://cdn.instructables.com/FCJ/38EH/I941D8R7/FCJ38EHI941D8R7.SQUARE.jpg https://cdn.instructables.com/FCJ/38EH/I941D8R7/FCJ38EHI941D8R7.SMALL.jpg AlmusYang Hello everyone In this instructable I will show you how to make a 3d printer under 200$. This 3D printer -Tower Simple XL, Maybe I should call it 3D printer of Sauron, lol.This 3D printer have 6* 6* 6 Inches build volum and you can build it without any 3Dprint part.(*Laser cutting needed*)If you li...
By: AlmusYang

Continue Reading »]]>
Wed, 29 Apr 2015 08:12:44 PDT
Long Bed Printed 3d Printer http://www.instructables.com/id/Long-Bed-Printed-3d-Printer/
Long Bed Printed 3d Printer - More DIY How To Projects]]> https://cdn.instructables.com/FWX/9QW9/I8766YZS/FWX9QW9I8766YZS.SQUARE2.jpg https://cdn.instructables.com/FWX/9QW9/I8766YZS/FWX9QW9I8766YZS.SQUARE.jpg https://cdn.instructables.com/FWX/9QW9/I8766YZS/FWX9QW9I8766YZS.SMALL.jpg dmserve The Long Bed 3d Printer "aka Big Red" was created to see how much of a 3d printer could be printed. That lead me to design a frame that could be printed on a heated bed, soon discovered I needed a larger build surface. After making a way to accurately control a larger bed, I had the maximum size tha...
By: dmserve

Continue Reading »]]>
Tue, 7 Apr 2015 21:38:36 PDT
EWaste 60$ 3DPrinter http://www.instructables.com/id/eWaste-60-3DPrinter/
EWaste 60$ 3DPrinter - More DIY How To Projects]]> https://cdn.instructables.com/FPU/UWH5/I236HBS6/FPUUWH5I236HBS6.SQUARE2.jpg https://cdn.instructables.com/FPU/UWH5/I236HBS6/FPUUWH5I236HBS6.SQUARE.jpg https://cdn.instructables.com/FPU/UWH5/I236HBS6/FPUUWH5I236HBS6.SMALL.jpg mikelllc This project describes the design of a very low budget 3D Printer that is mainly built out of recycled electronic components. The result is a small format printer for less than 100$.First of all, we learn how a generic CNC system works (by assembling and calibrating bearings, guides and threads) and...
By: mikelllc

Continue Reading »]]>
Tue, 4 Nov 2014 09:56:57 PST
Improved Optical End-Stop http://www.instructables.com/id/Improved-Optical-End-Stop/
Improved Optical End-Stop - More DIY How To Projects]]> https://cdn.instructables.com/FW7/M8PQ/H742FCSO/FW7M8PQH742FCSO.SQUARE2.jpg https://cdn.instructables.com/FW7/M8PQ/H742FCSO/FW7M8PQH742FCSO.SQUARE.jpg https://cdn.instructables.com/FW7/M8PQ/H742FCSO/FW7M8PQH742FCSO.SMALL.jpg Jason-B I am in the process of building a Rep Rap Prusa 3D printer, and I have this habit of trying to re-invent the wheel. I started researching electronics and really disliked everything I found, I had originally ordered some gen 2.1 Opto boards, which I decided were too large for the printed clamps. Af...
By: Jason-B

Continue Reading »]]>
Mon, 17 Sep 2012 20:07:12 PDT
Heated Build Chamber for Rapman 3D Printer http://www.instructables.com/id/Heated-Build-Chamber-for-Rapman-3D-Printer/
Heated Build Chamber for Rapman 3D Printer - More DIY How To Projects]]> https://cdn.instructables.com/FKS/II5M/H006CDUA/FKSII5MH006CDUA.SQUARE2.jpg https://cdn.instructables.com/FKS/II5M/H006CDUA/FKSII5MH006CDUA.SQUARE.jpg https://cdn.instructables.com/FKS/II5M/H006CDUA/FKSII5MH006CDUA.SMALL.jpg TimPayne This is an Instructable for a heated build chamber to house a Rapman 3.2 3D Printer. I chose the Rapman 3.2 because of it's relatively large print area, user friendly interface and the available dual extrusion upgrade. Assembly of the kit was simple and I found myself printing in no time; however, I...
By: TimPayne

Continue Reading »]]>
Sat, 31 Mar 2012 19:53:01 PDT
Development of a 3D Printed Part - Prusa Mendel Hair Dryer Heated Bed Mount http://www.instructables.com/id/Development-of-a-3D-Printed-Part-Prusa-Mendel-Ha/
Development of a 3D Printed Part - Prusa Mendel Hair Dryer Heated Bed Mount - More DIY How To Projects]]> https://cdn.instructables.com/F5K/DQXM/GZHK30G8/F5KDQXMGZHK30G8.SQUARE2.jpg https://cdn.instructables.com/F5K/DQXM/GZHK30G8/F5KDQXMGZHK30G8.SQUARE.jpg https://cdn.instructables.com/F5K/DQXM/GZHK30G8/F5KDQXMGZHK30G8.SMALL.jpg macskyver Last night I was printing a frame vertex for a Prusa Mendel based CNC router...and I was having a really hard time with my non heated bed...  The part would peel off the bed almost immediately... so I tried the raft feature... and even the raft lines were peeling off rapidly... I knew the problem wa...
By: macskyver

Continue Reading »]]>
Tue, 6 Mar 2012 22:09:47 PST