Instructables: exploring - technology - arduino - diy http://www.instructables.com Thu, 30 Jun 2016 07:24:33 PDT BLOX v1.01 DIY: A 5 Minutes Contactless OLED Thermometer With Arduino And MLX90614 http://www.instructables.com/id/DIY-a-5-Minutes-Contactless-OLED-Thermometer-With-/
DIY: A 5 Minutes Contactless OLED Thermometer With Arduino And MLX90614 - More DIY How To Projects]]> http://cdn.instructables.com/F6F/28TT/IPYCABXS/F6F28TTIPYCABXS.SQUARE2.jpg http://cdn.instructables.com/F6F/28TT/IPYCABXS/F6F28TTIPYCABXS.SQUARE.jpg http://cdn.instructables.com/F6F/28TT/IPYCABXS/F6F28TTIPYCABXS.SMALL.jpg Konstantin Dimitrov Hello, everyone ! Today I'm going to show you how to make a contactless OLED thermometer with Arduino UNO and Infrared temp sensor MLX90614 in 5 minutes. This project is very simple, it requires basic programming and electronic skills to make it.Lets beging ! Materials for the project To make you...
By: Konstantin Dimitrov

Continue Reading »]]>
Tue, 28 Jun 2016 03:54:44 PDT
DIY PASSCODE LOCK SYSTEM USING ARDUINO(EEPROM BASED) http://www.instructables.com/id/PASSCODE-LOCK-SYSTEM-USING-ARDUINOEEPROM-BASED/
DIY PASSCODE LOCK SYSTEM USING ARDUINO(EEPROM BASED) - More DIY How To Projects]]> http://cdn.instructables.com/F2B/RJ0L/IPYC9C1G/F2BRJ0LIPYC9C1G.SQUARE2.jpg http://cdn.instructables.com/F2B/RJ0L/IPYC9C1G/F2BRJ0LIPYC9C1G.SQUARE.jpg http://cdn.instructables.com/F2B/RJ0L/IPYC9C1G/F2BRJ0LIPYC9C1G.SMALL.jpg DIYmechanics Hi guys how are you ?i hope you are fine !Have you ever seen Passcode lock system in some office and in some homes, its really interesting and cool right ! .It will make our home secure and smart i mean automated.it is a small part of home automation.I'am also saw one in my neighbour's house. He bou...
By: DIYmechanics

Continue Reading »]]>
Tue, 28 Jun 2016 03:14:27 PDT
Auduino - Lo-Fi Arduino Synthesizer http://www.instructables.com/id/Auduino-Lo-Fi-Arduino-Synthesizer/
Auduino - Lo-Fi Arduino Synthesizer - More DIY How To Projects]]> http://cdn.instructables.com/FF8/3IV2/IPYC5NCR/FF83IV2IPYC5NCR.SQUARE2.jpg http://cdn.instructables.com/FF8/3IV2/IPYC5NCR/FF83IV2IPYC5NCR.SQUARE.jpg http://cdn.instructables.com/FF8/3IV2/IPYC5NCR/FF83IV2IPYC5NCR.SMALL.jpg DIY Circuits In this instructable I will show you how I made the Auduino synthesizer. It is meant to be listened on headphones but if you want to listen on speaker you will have to use an amplifier which I will show in other instructable.The circuit is relatively simple. For me the hardest part was to burn the b...
By: DIY Circuits

Continue Reading »]]>
Mon, 27 Jun 2016 14:05:20 PDT
Fully Automated Arduino Roller Coaster Control System http://www.instructables.com/id/Fully-Automated-Arduino-Roller-Coaster-Control-Sys/
Fully Automated Arduino Roller Coaster Control System - More DIY How To Projects]]> http://cdn.instructables.com/FY6/122D/IPWWSL4I/FY6122DIPWWSL4I.SQUARE2.jpg http://cdn.instructables.com/FY6/122D/IPWWSL4I/FY6122DIPWWSL4I.SQUARE.jpg http://cdn.instructables.com/FY6/122D/IPWWSL4I/FY6122DIPWWSL4I.SMALL.jpg 16hollja In this Instructable I will show you how to take your model roller coaster to the next level! I have loved roller coasters since before I can remember! Through the years I have watched the rides run at theme parks and learned from some professionals about how computer systems keep riders safe on rol...
By: 16hollja

Continue Reading »]]>
Sun, 26 Jun 2016 14:05:29 PDT
DIY Alarm House against thieves http://www.instructables.com/id/DIY-Alarm-House-Against-Thieves/
DIY Alarm House against thieves - More DIY How To Projects]]> http://cdn.instructables.com/FVY/IWXN/IPTJB3WC/FVYIWXNIPTJB3WC.SQUARE2.jpg http://cdn.instructables.com/FVY/IWXN/IPTJB3WC/FVYIWXNIPTJB3WC.SQUARE.jpg http://cdn.instructables.com/FVY/IWXN/IPTJB3WC/FVYIWXNIPTJB3WC.SMALL.jpg AhmedA30 IOT control our lives, this project help any one from stealing his home, it senses movement in house and send email to paterfamilias after this it will know in house have thief and arrested him. Materials 1-Arduino Nano2-ESP82663-breadboard4-PIR Sensor5-blynk6-9V Battery7-Some Jumber Wires Inst...
By: AhmedA30

Continue Reading »]]>
Sat, 25 Jun 2016 08:25:41 PDT
Tiny auto-measuring cap with mini without battery_part_2 http://www.instructables.com/id/Tiny-Auto-measuring-Cap-With-Minipart2/
Tiny auto-measuring cap with mini without battery_part_2 - More DIY How To Projects]]> http://cdn.instructables.com/FAP/I77J/IPU1VIKO/FAPI77JIPU1VIKO.SQUARE2.jpg http://cdn.instructables.com/FAP/I77J/IPU1VIKO/FAPI77JIPU1VIKO.SQUARE.jpg http://cdn.instructables.com/FAP/I77J/IPU1VIKO/FAPI77JIPU1VIKO.SMALL.jpg David_Lin between the astronauts, the bases, the space-station, the Earth.the most important thing is the communication!EX : It's the link between the space-station to the Earth.and you need a remote probe to fly into an area for information.In outer space 1)the weight must be light:not take things that unuse...
By: David_Lin

Continue Reading »]]>
Fri, 24 Jun 2016 22:53:20 PDT
How to use a Matrix Keypad with Ardunio http://www.instructables.com/id/How-to-Use-a-Matrix-Keypad-With-Ardunio/
How to use a Matrix Keypad with Ardunio - More DIY How To Projects]]> http://cdn.instructables.com/FKB/YD7N/IPTJBI19/FKBYD7NIPTJBI19.SQUARE2.jpg http://cdn.instructables.com/FKB/YD7N/IPTJBI19/FKBYD7NIPTJBI19.SQUARE.jpg http://cdn.instructables.com/FKB/YD7N/IPTJBI19/FKBYD7NIPTJBI19.SMALL.jpg PaperAirplaneandThings Matrix Keypads are cool! It's like a keyboard that can easily be used to interface with your Arduino for various different projects, from combo locks to calculators to wireless remotes and extra buttons on your keyboard, these certainly are very useful. Today we're going to explore how to interface ...
By: PaperAirplaneandThings

Continue Reading »]]>
Fri, 24 Jun 2016 18:25:26 PDT
Arduino UNO Guitar Pedal - Open Hardware. http://www.instructables.com/id/Arduino-UNO-Guitar-Pedal-Open-Hardware/
Arduino UNO Guitar Pedal - Open Hardware. - More DIY How To Projects]]> http://cdn.instructables.com/FKB/SJRH/IPR4U454/FKBSJRHIPR4U454.SQUARE2.jpg http://cdn.instructables.com/FKB/SJRH/IPR4U454/FKBSJRHIPR4U454.SQUARE.jpg http://cdn.instructables.com/FKB/SJRH/IPR4U454/FKBSJRHIPR4U454.SMALL.jpg ElectroSmash pedalSHIELD UNO is an Open Source programmable guitar pedal based in Arduino/Genuino UNO. A platform to start developing your interest in guitar pedals, effects, audio electronics or digital audio.The aim is to build a guitar pedal with Arduino UNO and easy-to-find components and enjoy creating your...
By: ElectroSmash

Continue Reading »]]>
Wed, 22 Jun 2016 14:05:14 PDT
DIY RELAY MODULE http://www.instructables.com/id/DIY-RELAY-MODULE/
DIY RELAY MODULE - More DIY How To Projects]]> http://cdn.instructables.com/FGP/HHT0/IPPAN58C/FGPHHT0IPPAN58C.SQUARE2.jpg http://cdn.instructables.com/FGP/HHT0/IPPAN58C/FGPHHT0IPPAN58C.SQUARE.jpg http://cdn.instructables.com/FGP/HHT0/IPPAN58C/FGPHHT0IPPAN58C.SMALL.jpg DIYmechanics Hi guys how are you ?I hope you are fine !Are you looking for making a relay board yourself , then your in right place.today i will show you how to make a Diy relay modulethat can be used any purpose . Even you can hookup with your Arduino or raspberry pi else use it for any project you needed a rel...
By: DIYmechanics

Continue Reading »]]>
Tue, 21 Jun 2016 12:23:44 PDT
How to Make an Arduino Instrument (Using an Ultrasonic Sensor) http://www.instructables.com/id/How-to-Make-an-Arduino-Instrument/
How to Make an Arduino Instrument (Using an Ultrasonic Sensor) - More DIY How To Projects]]> http://cdn.instructables.com/FSH/ZGX8/IPMVCXJI/FSHZGX8IPMVCXJI.SQUARE2.jpg http://cdn.instructables.com/FSH/ZGX8/IPMVCXJI/FSHZGX8IPMVCXJI.SQUARE.jpg http://cdn.instructables.com/FSH/ZGX8/IPMVCXJI/FSHZGX8IPMVCXJI.SMALL.jpg samsneatprojects This instrument is made using an HC-SR04 Ultrasonic sensor, a Force Sensitive Resistor, and a Piezo Buzzer. You press the force sensor to begin playing music, and wave your hand in front of the ultrasonic sensor at various distances to play different notes. This video describes how it works and how ...
By: samsneatprojects

Continue Reading »]]>
Sun, 19 Jun 2016 20:05:13 PDT
Make your own 10x10 LED Matrix http://www.instructables.com/id/Make-Your-Own-10x10-LED-Matrix/
Make your own 10x10 LED Matrix - More DIY How To Projects]]> http://cdn.instructables.com/F3F/TJRG/IPMPDQKV/F3FTJRGIPMPDQKV.SQUARE2.jpg http://cdn.instructables.com/F3F/TJRG/IPMPDQKV/F3FTJRGIPMPDQKV.SQUARE.jpg http://cdn.instructables.com/F3F/TJRG/IPMPDQKV/F3FTJRGIPMPDQKV.SMALL.jpg GreatScottLab In this project I will show you how to combine commonly available WS2812B RGB LEDs with an Arduino Nano in order to create a colorful 10x10 LED Matrix. Let's get started! Watch the video! The video gives you all the basic information you need to create your own LED Matrix. In the next steps howev...
By: GreatScottLab

Continue Reading »]]>
Sun, 19 Jun 2016 09:28:29 PDT
Mobile Roomba-Mounted Crane http://www.instructables.com/id/Mobile-Rumba-Mounted-Crane/
Mobile Roomba-Mounted Crane - More DIY How To Projects]]> http://cdn.instructables.com/FNF/MN1R/IPOC325E/FNFMN1RIPOC325E.SQUARE2.jpg http://cdn.instructables.com/FNF/MN1R/IPOC325E/FNFMN1RIPOC325E.SQUARE.jpg http://cdn.instructables.com/FNF/MN1R/IPOC325E/FNFMN1RIPOC325E.SMALL.jpg Levi Evans For our STEM Skills class, Hoang-Viet Tran, Joachim Kennedy, and I (Levi Evans) decided to construct a crane mounted upon a Roomba that would articulate its arm and bring a hook up and down. Acquire Materials 1. Roomba2. Perforated Wood Slats (2ft by 2ft)3. Erector Sets (You can use wood, metal, ...
By: Levi Evans

Continue Reading »]]>
Sat, 18 Jun 2016 07:03:21 PDT
tiny auto-measuring cap seven segment with mini http://www.instructables.com/id/Tiny-Auto-measuring-Cap-Seven-Segment-With-Mini/
tiny auto-measuring cap seven segment with mini - More DIY How To Projects]]> http://cdn.instructables.com/FBE/USBI/IPK94HSJ/FBEUSBIIPK94HSJ.SQUARE2.jpg http://cdn.instructables.com/FBE/USBI/IPK94HSJ/FBEUSBIIPK94HSJ.SQUARE.jpg http://cdn.instructables.com/FBE/USBI/IPK94HSJ/FBEUSBIIPK94HSJ.SMALL.jpg David_Lin If you have learned about the capacitor(RF CIRCUIT).the H bridge seem too complex, too many to adjust, too many to change and too many to read for just balancing the bridge ! (not include S.G and CALCULATES yet)LOOK HERE !you don't even use one single finger, it's just tell how many uF OR nf inde...
By: David_Lin

Continue Reading »]]>
Sat, 18 Jun 2016 03:04:41 PDT
How to Program a LilyPad Without FTDI Converter http://www.instructables.com/id/How-to-Program-a-LilyPad-Without-FTDI-Converter/
How to Program a LilyPad Without FTDI Converter - More DIY How To Projects]]> http://cdn.instructables.com/FL0/781K/IPE6JNTI/FL0781KIPE6JNTI.SQUARE2.jpg http://cdn.instructables.com/FL0/781K/IPE6JNTI/FL0781KIPE6JNTI.SQUARE.jpg http://cdn.instructables.com/FL0/781K/IPE6JNTI/FL0781KIPE6JNTI.SMALL.jpg dev.alessiobigini Hello everyone! In this article I will show how to program the Arduino LilyPad without the FTDI converter.Arduino LilyPad is one of the many Arduino microcontroller family, but with a feature that makes it unique.The LilyPad board, in fact, can be sewn onto fabric using a common thread in stainless ...
By: dev.alessiobigini

Continue Reading »]]>
Tue, 14 Jun 2016 01:15:31 PDT
How To make an inverter using ARDUINO http://www.instructables.com/id/How-to-Make-an-Inverter-Using-ARDUINO/
How To make an inverter using ARDUINO - More DIY How To Projects]]> http://cdn.instructables.com/FGZ/CQQ4/IPBH70XO/FGZCQQ4IPBH70XO.SQUARE2.jpg http://cdn.instructables.com/FGZ/CQQ4/IPBH70XO/FGZCQQ4IPBH70XO.SQUARE.jpg http://cdn.instructables.com/FGZ/CQQ4/IPBH70XO/FGZCQQ4IPBH70XO.SMALL.jpg ShailzaP Hi there, this project is all about designing an inverter from scratch, I am always fantasized by the projects which involves a software controlling an hardware. With this inverter, you can power up various electronic Appliances like TV, Fan etc.Working : The aim of the inverter circuit is to conve...
By: ShailzaP

Continue Reading »]]>
Sun, 12 Jun 2016 12:58:21 PDT
Arduino Motion Tracker http://www.instructables.com/id/Arduino-Motion-Tracker-From-Alien-Isolation/
Arduino Motion Tracker - More DIY How To Projects]]> http://cdn.instructables.com/FCB/DOCV/IP738MIA/FCBDOCVIP738MIA.SQUARE2.jpg http://cdn.instructables.com/FCB/DOCV/IP738MIA/FCBDOCVIP738MIA.SQUARE.jpg http://cdn.instructables.com/FCB/DOCV/IP738MIA/FCBDOCVIP738MIA.SMALL.jpg Dylan91 Hi everyone!This is my first arduino based instructable i hope you will like it:) I'm a big fan of the first Alien movie and the "old-sci-fi" gadgets, so I decided to make a fully operational portable motion-tracker. In this tutorial I will show you every step how I made it so you can make your own ...
By: Dylan91

Continue Reading »]]>
Thu, 9 Jun 2016 07:52:44 PDT
Sensor Ultrasonico Y Parlante http://www.instructables.com/id/Sensor-Ultrasonico-Y-Parlante/
Sensor Ultrasonico Y Parlante - More DIY How To Projects]]> http://cdn.instructables.com/FF4/YE30/IP8M8PHS/FF4YE30IP8M8PHS.SQUARE2.jpg http://cdn.instructables.com/FF4/YE30/IP8M8PHS/FF4YE30IP8M8PHS.SQUARE.jpg http://cdn.instructables.com/FF4/YE30/IP8M8PHS/FF4YE30IP8M8PHS.SMALL.jpg Stuxnet97 Pequeño proyecto para un auto o llevar otras tareas como encender un motor. Materiales●Arduino Uno●HCSR04●BATERÍA 9V ●USB TYPE A/ B●Cables ●Projectboard Conectar arduino Descargar el IDE software para compilar el código del arduino.Debemos añadir librerias para que compile el código. -Pitches.h-...
By: Stuxnet97

Continue Reading »]]>
Wed, 8 Jun 2016 11:00:11 PDT
Hacking a RC car http://www.instructables.com/id/Arduino-Bluetooth-RC-Car-2/
Hacking a RC car - More DIY How To Projects]]> http://cdn.instructables.com/FFC/YIN9/IP45GN01/FFCYIN9IP45GN01.SQUARE2.jpg http://cdn.instructables.com/FFC/YIN9/IP45GN01/FFCYIN9IP45GN01.SQUARE.jpg http://cdn.instructables.com/FFC/YIN9/IP45GN01/FFCYIN9IP45GN01.SMALL.jpg geekrex RC cars are really fun to hack and they provide good chasis for low price,to make robots but selecting one to make is a pain in the ash with millions of type. My little brother had his birthday recently and i wanted to give him something really cool ,I ended up giving him this rc car.RC car hacking ...
By: geekrex

Continue Reading »]]>
Mon, 6 Jun 2016 10:25:22 PDT
How to build an Arduino Uno on a BreadBoard http://www.instructables.com/id/How-to-Build-an-Arduino-Uno-on-a-BreadBoard/
How to build an Arduino Uno on a BreadBoard - More DIY How To Projects]]> http://cdn.instructables.com/F2R/36Z6/IOZ51B16/F2R36Z6IOZ51B16.SQUARE2.jpg http://cdn.instructables.com/F2R/36Z6/IOZ51B16/F2R36Z6IOZ51B16.SQUARE.jpg http://cdn.instructables.com/F2R/36Z6/IOZ51B16/F2R36Z6IOZ51B16.SMALL.jpg webgeeks If you are like and me and enjoy building electronic projects then you might have worked with the Arduino Uno. The Arduino uno is the most popular micro controller of the series and has a large collection of libraries which make working with it very easy. So there would be times where you may need m...
By: webgeeks

Continue Reading »]]>
Fri, 3 Jun 2016 06:18:30 PDT
1$ Wireless device to Control Arduino from anywhere http://www.instructables.com/id/Cheap-Wireless-Device-to-Control-Arduino-Anywhere-/
1$ Wireless device to Control Arduino from anywhere - More DIY How To Projects]]> http://cdn.instructables.com/FH8/1B66/IOX4LER7/FH81B66IOX4LER7.SQUARE2.jpg http://cdn.instructables.com/FH8/1B66/IOX4LER7/FH81B66IOX4LER7.SQUARE.jpg http://cdn.instructables.com/FH8/1B66/IOX4LER7/FH81B66IOX4LER7.SMALL.jpg AXR AMAR #DTMF stands for DUAL TONE MULTIPLE FREQUENCY , in which we are going to use Mobile phone to make its as a wireless device, it works on the frequency which we generate on keypad of caller phone. How it works? There are two frequency groups in keypad of mobile phone ,combination of these two will...
By: AXR AMAR

Continue Reading »]]>
Wed, 1 Jun 2016 22:00:28 PDT
LPD8806 VUMeter with PC & Arduino + GUI http://www.instructables.com/id/Addressable-RGB-LED-Arduino-VUMeter-GUI/
LPD8806 VUMeter with PC & Arduino + GUI - More DIY How To Projects]]> http://cdn.instructables.com/F17/TP21/IOVPRNYE/F17TP21IOVPRNYE.SQUARE2.jpg http://cdn.instructables.com/F17/TP21/IOVPRNYE/F17TP21IOVPRNYE.SQUARE.jpg http://cdn.instructables.com/F17/TP21/IOVPRNYE/F17TP21IOVPRNYE.SMALL.jpg Nicolas Britos If you like this project please vote for it in the "Sensors Contest 2016" and "Rainbow Contest 2016" as it took me a lot of time to make it (pressing the top-right button that says "Vote").I have always wanted some kind of LED VU-Meter because I like music and LEDs but all of the devices I found o...
By: Nicolas Britos

Continue Reading »]]>
Wed, 1 Jun 2016 16:37:41 PDT
How to Use an Ultrasonic Sensor With Arduino http://www.instructables.com/id/How-to-Use-an-Ultrasonic-Sensor-With-Arduino/
How to Use an Ultrasonic Sensor With Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FLJ/THZN/IOVP60E2/FLJTHZNIOVP60E2.SQUARE2.jpg http://cdn.instructables.com/FLJ/THZN/IOVP60E2/FLJTHZNIOVP60E2.SQUARE.jpg http://cdn.instructables.com/FLJ/THZN/IOVP60E2/FLJTHZNIOVP60E2.SMALL.jpg samsneatprojects HC-SR04 Ultrasonic sensors can measure distances fairly accurately and are very useful in many Arduino projects. I've used them in autonomous robots, electronic instruments, and many other projects. They have a range of 2 cm - 400 cm (~ 0.8 inches - 13 feet) and work best against flat surfaces. Vi...
By: samsneatprojects

Continue Reading »]]>
Wed, 1 Jun 2016 09:33:37 PDT
Arduino Door Locking System http://www.instructables.com/id/Arduino-Door-Locking-System/
Arduino Door Locking System - More DIY How To Projects]]> http://cdn.instructables.com/F4C/9CLO/IOVRBR11/F4C9CLOIOVRBR11.SQUARE2.jpg http://cdn.instructables.com/F4C/9CLO/IOVRBR11/F4C9CLOIOVRBR11.SQUARE.jpg http://cdn.instructables.com/F4C/9CLO/IOVRBR11/F4C9CLOIOVRBR11.SMALL.jpg VaibhavC1 In this project I made an door lock (or box lock) that opens when you enter your password and press "*". Material Needed.... 1. Arduino uno2. Standard Servo3. Red And Green LED4. Male And Female Pin Headers 5. Door Lock6. 4X4 Keypad7.PCB Make PCB .... Solder all the connection as shown above ...
By: VaibhavC1

Continue Reading »]]>
Wed, 1 Jun 2016 03:48:22 PDT
Smart Arduino walking stick for visually impaired http://www.instructables.com/id/Smart-Arduino-Walking-Stick-for-Visually-Impaired/
Smart Arduino walking stick for visually impaired - More DIY How To Projects]]> http://cdn.instructables.com/F5Q/YRZV/IOVPNM7D/F5QYRZVIOVPNM7D.SQUARE2.jpg http://cdn.instructables.com/F5Q/YRZV/IOVPNM7D/F5QYRZVIOVPNM7D.SQUARE.jpg http://cdn.instructables.com/F5Q/YRZV/IOVPNM7D/F5QYRZVIOVPNM7D.SMALL.jpg Naufuu The smart walking stick is a very interesting project and ideal for beginners. The main aim of this stick is to alert the visually impaired about an obstacle in his way. Whenever the sensor detects any object in a range of 60 cm it triggers the buzzer.This project can also be used as a distance find...
By: Naufuu

Continue Reading »]]>
Tue, 31 May 2016 13:13:34 PDT
Arduino Password Security System with magnetic door sensors http://www.instructables.com/id/Arduino-Password-Security-System-With-Magnetic-Doo/
Arduino Password Security System with magnetic door sensors - More DIY How To Projects]]> http://cdn.instructables.com/FWX/87S4/IOVP4KXX/FWX87S4IOVP4KXX.SQUARE2.jpg http://cdn.instructables.com/FWX/87S4/IOVP4KXX/FWX87S4IOVP4KXX.SQUARE.jpg http://cdn.instructables.com/FWX/87S4/IOVP4KXX/FWX87S4IOVP4KXX.SMALL.jpg Ardumotive_com In this Instructables guide I will show you how to make your own password security system by using the Arduino uno board and some magnetic door switches. I made my own circuit by using the ATmega328 micro controller but this is an optional step. In this guide I will help you to make it easily on bre...
By: Ardumotive_com

Continue Reading »]]>
Tue, 31 May 2016 11:47:47 PDT
Simple arduino car using HC-06 Bluetooth Module http://www.instructables.com/id/Simple-Arduino-Car-Using-HC-06-Bluetooth-Module/
Simple arduino car using HC-06 Bluetooth Module - More DIY How To Projects]]> http://cdn.instructables.com/FFP/ODKH/IOT2XJNW/FFPODKHIOT2XJNW.SQUARE2.jpg http://cdn.instructables.com/FFP/ODKH/IOT2XJNW/FFPODKHIOT2XJNW.SQUARE.jpg http://cdn.instructables.com/FFP/ODKH/IOT2XJNW/FFPODKHIOT2XJNW.SMALL.jpg Naufuu The easiest way to build an Arduino car and control it with your android device. Things required: Laptop with Arduino software.Any Arduino. (I am using Leonardo).Two DC motors with tires attached firmly.An acrylic or plastic piece for the base. (A strong piece of cardboard will do the required w...
By: Naufuu

Continue Reading »]]>
Mon, 30 May 2016 23:04:27 PDT
Vision: A Torch For The Visually Impaired http://www.instructables.com/id/Vision-a-Torch-for-the-Visually-Impaired/
Vision: A Torch For The Visually Impaired - More DIY How To Projects]]> http://cdn.instructables.com/F5R/7VDK/IOSP9RPC/F5R7VDKIOSP9RPC.SQUARE2.jpg http://cdn.instructables.com/F5R/7VDK/IOSP9RPC/F5R7VDKIOSP9RPC.SQUARE.jpg http://cdn.instructables.com/F5R/7VDK/IOSP9RPC/F5R7VDKIOSP9RPC.SMALL.jpg Saiyam Vision is a torch shaped device to help blind people navigate with greater comfort, speed and confidence, whilst making use of ultrasonic waves to detect nearby obstacles and to notify the user through vibrations and beeps of a buzzer. The idea was inspired from bats, who also use sound waves of hig...
By: Saiyam

Continue Reading »]]>
Mon, 30 May 2016 03:51:28 PDT
Arduino Bluetooth Controlled Electric Door Opener http://www.instructables.com/id/Arduino-Bluetooth-Controlled-Electric-Door-Opener/
Arduino Bluetooth Controlled Electric Door Opener - More DIY How To Projects]]> http://cdn.instructables.com/FBT/4XPO/IORESLIT/FBT4XPOIORESLIT.SQUARE2.jpg http://cdn.instructables.com/FBT/4XPO/IORESLIT/FBT4XPOIORESLIT.SQUARE.jpg http://cdn.instructables.com/FBT/4XPO/IORESLIT/FBT4XPOIORESLIT.SMALL.jpg Ardumotive_com Hello! In this Instructables guide I will show you how to make your own Bluetooth controlled unlock door system by using the Arduino uno board. I made my own circuit by using the ATmega328 micro controller but this is an optional step. In this guide I will help you to make it easily on breadboard by...
By: Ardumotive_com

Continue Reading »]]>
Sat, 28 May 2016 12:17:00 PDT
Arduino - ACCESS CODE PROTECTED 4 CHANNEL RELAY with 4x4 keypad http://www.instructables.com/id/Arduino-ACCESS-CODE-PROTECTED-4-CHANNEL-RELAY-With/
Arduino - ACCESS CODE PROTECTED 4 CHANNEL RELAY with 4x4 keypad - More DIY How To Projects]]> http://cdn.instructables.com/FV4/EXXP/ION6N9O4/FV4EXXPION6N9O4.SQUARE2.jpg http://cdn.instructables.com/FV4/EXXP/ION6N9O4/FV4EXXPION6N9O4.SQUARE.jpg http://cdn.instructables.com/FV4/EXXP/ION6N9O4/FV4EXXPION6N9O4.SMALL.jpg vandenbrande Hello world! This code is made to put a access code/password protection on your "dangerous" machines in the garage/workplace (For example). To protect your kids from the danger that might lurk in your garage, without the code power cannot be turned on. Hide it in a box that you can lock, put it on ...
By: vandenbrande

Continue Reading »]]>
Wed, 25 May 2016 18:33:33 PDT
DIY termostato online http://www.instructables.com/id/Il-Mio-Termostato-Online/
DIY termostato online - More DIY How To Projects]]> http://cdn.instructables.com/F1E/MR3K/ION4HKB4/F1EMR3KION4HKB4.SQUARE2.jpg http://cdn.instructables.com/F1E/MR3K/ION4HKB4/F1EMR3KION4HKB4.SQUARE.jpg http://cdn.instructables.com/F1E/MR3K/ION4HKB4/F1EMR3KION4HKB4.SMALL.jpg tommaso moro In questo articolo tratto la realizzazione di un termostato controllabile via internet tramite una app android.Ho usato la ormai onnipresente ESP8266, un sensore e poco altroHo visto in lungo ed in largo tanti esperimenti più o meno utilipraticidifficiliinutilisimpatici e cosi via, lo scopo sembra ...
By: tommaso moro

Continue Reading »]]>
Wed, 25 May 2016 14:46:05 PDT
4-wire Touchscreen interfacing with arduino http://www.instructables.com/id/4-wire-Touchscreen-Interfacing-With-Arduino/
4-wire Touchscreen interfacing with arduino - More DIY How To Projects]]> http://cdn.instructables.com/FZG/8L12/IOMP0G6R/FZG8L12IOMP0G6R.SQUARE2.jpg http://cdn.instructables.com/FZG/8L12/IOMP0G6R/FZG8L12IOMP0G6R.SQUARE.jpg http://cdn.instructables.com/FZG/8L12/IOMP0G6R/FZG8L12IOMP0G6R.SMALL.jpg chandankmr02 In this post, we are going to interface 4-wire touch screen with arduino and make 4*3 keypad from them and labelling them as 0-9, * and #. List of components: Arduino Uno4-wire touch screenGlue gunConnecting wireSoldering ironBase for touch screen Soldering the touch screen Carefully solder th...
By: chandankmr02

Continue Reading »]]>
Wed, 25 May 2016 05:18:50 PDT
Arduino - AC Main Frequency Monitor http://www.instructables.com/id/Arduino-AC-Main-Frequency-Monitor/
Arduino - AC Main Frequency Monitor - More DIY How To Projects]]> http://cdn.instructables.com/FAN/OBC4/IOHEPG91/FANOBC4IOHEPG91.SQUARE2.jpg http://cdn.instructables.com/FAN/OBC4/IOHEPG91/FANOBC4IOHEPG91.SQUARE.jpg http://cdn.instructables.com/FAN/OBC4/IOHEPG91/FANOBC4IOHEPG91.SMALL.jpg mholguin-veras Hi, this is my first time, so please, be gentle!WARNING: Working with AC voltage can be lethal. If you don't know what you 're doing please don't try this.I've had in mind developping a monitor system, for my emergency power, consisting of 4 6V batteries and a power inverter to generate 110V AC at ...
By: mholguin-veras

Continue Reading »]]>
Sat, 21 May 2016 20:19:42 PDT
DIY | Easy Arduino Laser Tripwire Security System! http://www.instructables.com/id/DIY-Easy-Arduino-Laser-Tripwire-Security-System/
DIY | Easy Arduino Laser Tripwire Security System! - More DIY How To Projects]]> http://cdn.instructables.com/FCF/L20K/IOEKKV94/FCFL20KIOEKKV94.SQUARE2.jpg http://cdn.instructables.com/FCF/L20K/IOEKKV94/FCFL20KIOEKKV94.SQUARE.jpg http://cdn.instructables.com/FCF/L20K/IOEKKV94/FCFL20KIOEKKV94.SMALL.jpg RGBFreak In this tutorial I will be teaching you how you can build your own Laser Tripwire Security System at home!You will need the following components and materials: LED light Laser Module Laser Sensor Module Speaker or Piezo Buzzer 2 Small Breadboards with sticky tape on the back Arduino Breadboard wire...
By: RGBFreak

Continue Reading »]]>
Sat, 21 May 2016 07:07:33 PDT
DIY | 3x3x3 LED Cube for Arduino Nano+ http://www.instructables.com/id/DIY-3x3x3-LED-Cube-for-Arduino-Nano/
DIY | 3x3x3 LED Cube for Arduino Nano+ - More DIY How To Projects]]> http://cdn.instructables.com/FI8/444G/IOEXUKDX/FI8444GIOEXUKDX.SQUARE2.jpg http://cdn.instructables.com/FI8/444G/IOEXUKDX/FI8444GIOEXUKDX.SQUARE.jpg http://cdn.instructables.com/FI8/444G/IOEXUKDX/FI8444GIOEXUKDX.SMALL.jpg RGBFreak Hi everyone!My name is RGBFreak and I created a YouTube channel quite recently.I love DIY and I especially love LED's, so that's why I decided to make my own 3x3x3 LED Cube!You will need the following items to make this LED Cube: • 27 single colored LED's. • Arduino Nano or one of his bigger broth...
By: RGBFreak

Continue Reading »]]>
Fri, 20 May 2016 02:01:27 PDT
SmokerDuino V2 http://www.instructables.com/id/SmokerDuino-V2/
SmokerDuino V2 - More DIY How To Projects]]> http://cdn.instructables.com/FD4/FVQE/IOD4DW9V/FD4FVQEIOD4DW9V.SQUARE2.jpg http://cdn.instructables.com/FD4/FVQE/IOD4DW9V/FD4FVQEIOD4DW9V.SQUARE.jpg http://cdn.instructables.com/FD4/FVQE/IOD4DW9V/FD4FVQEIOD4DW9V.SMALL.jpg rjkorn They say "low & slow is the way to go". I had built a simple Smoker controller in a previous instructable. For V2 it's time to go big. I had posted a Wifi Meat Thermometer here before. I figured why not combine that with the smoker controller. I got this car diagnostic meter at a swapmeet and decide...
By: rjkorn

Continue Reading »]]>
Wed, 18 May 2016 11:02:04 PDT
Arduino - WEBCAM PAN TILT CONTROL Using servos & KY 023 Joystick http://www.instructables.com/id/Arduino-WEBCAM-PAN-TILT-CONTROL-Using-Servos-KY-02/
Arduino - WEBCAM PAN TILT CONTROL Using servos & KY 023 Joystick - More DIY How To Projects]]> http://cdn.instructables.com/F3M/URI6/IOABREEE/F3MURI6IOABREEE.SQUARE2.jpg http://cdn.instructables.com/F3M/URI6/IOABREEE/F3MURI6IOABREEE.SQUARE.jpg http://cdn.instructables.com/F3M/URI6/IOABREEE/F3MURI6IOABREEE.SMALL.jpg vandenbrande Hello world! Today i made a Pan tilt control with a old webcam, Dont mind the bad video, i said "OLD" LoL! Its pretty easy to build you need 2 servos a joystick, the schematic, code, and a little creativity. Follow the link for the Schematic Code & Parts List. I simply taped the Servos on top of eac...
By: vandenbrande

Continue Reading »]]>
Tue, 17 May 2016 09:24:38 PDT
DIY standalone Weather Station powered by Arduino http://www.instructables.com/id/DIY-Standalone-Weather-Station-Powered-by-Arduino/
DIY standalone Weather Station powered by Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FLH/QHKO/IOAAUFGV/FLHQHKOIOAAUFGV.SQUARE2.jpg http://cdn.instructables.com/FLH/QHKO/IOAAUFGV/FLHQHKOIOAAUFGV.SQUARE.jpg http://cdn.instructables.com/FLH/QHKO/IOAAUFGV/FLHQHKOIOAAUFGV.SMALL.jpg crakensio Hello Makers out thereAgain this is not a Step by step Instructable . Like always i forgot to take take snaps since the inception of this project. The idea of Building a community weather station using Open hardware Kicked a long back. We people from a local DIY community build this weather station....
By: crakensio

Continue Reading »]]>
Mon, 16 May 2016 23:13:40 PDT
DIY Beginners LEDs Controller (<20$) http://www.instructables.com/id/DIY-Beginners-LEDs-Controller-20/
DIY Beginners LEDs Controller (<20$) - More DIY How To Projects]]> http://cdn.instructables.com/FJS/31VR/IO6E0LS3/FJS31VRIO6E0LS3.SQUARE2.jpg http://cdn.instructables.com/FJS/31VR/IO6E0LS3/FJS31VRIO6E0LS3.SQUARE.jpg http://cdn.instructables.com/FJS/31VR/IO6E0LS3/FJS31VRIO6E0LS3.SMALL.jpg AlexandreI4 Ever wanted a color-changing LED array above your bed or in your living room ? Want to make your own Christmas lights ? You want to control exactly how your LEDs are going to behave ? Have an automatic turn ON/OFF, different colors on every different day etc...Also, this project is pretty easy, fast...
By: AlexandreI4

Continue Reading »]]>
Sun, 15 May 2016 07:57:52 PDT
Arduino RFID-RC522 - DOOR ACCES CONTROL/ RFID DOOR LOCK http://www.instructables.com/id/Arduino-RFID-RC255-DOOR-ACCES-CONTROL-RFID-DOOR-LO/
Arduino RFID-RC522 - DOOR ACCES CONTROL/ RFID DOOR LOCK - More DIY How To Projects]]> http://cdn.instructables.com/FT4/VZ19/IO7GSDY4/FT4VZ19IO7GSDY4.SQUARE2.jpg http://cdn.instructables.com/FT4/VZ19/IO7GSDY4/FT4VZ19IO7GSDY4.SQUARE.jpg http://cdn.instructables.com/FT4/VZ19/IO7GSDY4/FT4VZ19IO7GSDY4.SMALL.jpg vandenbrande Hello world! Today i made a RFID door lock. The lamp acts as a Electric door lock because i don't have a electrical lock, you simply add the door lock to the relay instead of the lamp. Check out the link for the Schematic code & Parts list. I could not find much about the module, i have the RFID-RC5...
By: vandenbrande

Continue Reading »]]>
Sat, 14 May 2016 20:16:04 PDT
Haptic Glove with DIY Flex Sensors http://www.instructables.com/id/Haptic-Glove-With-DIY-Flex-Sensors/
Haptic Glove with DIY Flex Sensors - More DIY How To Projects]]> http://cdn.instructables.com/FJA/JYZD/IO4JSM17/FJAJYZDIO4JSM17.SQUARE2.jpg http://cdn.instructables.com/FJA/JYZD/IO4JSM17/FJAJYZDIO4JSM17.SQUARE.jpg http://cdn.instructables.com/FJA/JYZD/IO4JSM17/FJAJYZDIO4JSM17.SMALL.jpg vu2aeo Interacting with a computer through a mouse or a joystick can be rather mundane and sometimes (especially in video game play and robotics) its necessary to encode the movements of our fingers in to electrical signals that a microcontroller can read. Once we can interpret the flexing of our fingers, ...
By: vu2aeo

Continue Reading »]]>
Fri, 13 May 2016 07:57:23 PDT
Arduino report robbery with a photo on twitter using 1sheeld http://www.instructables.com/id/How-Can-You-Report-Thief-With-a-Photo-on-Twitter-b/
Arduino report robbery with a photo on twitter using 1sheeld - More DIY How To Projects]]> http://cdn.instructables.com/FCN/GFSX/IO34B6ZQ/FCNGFSXIO34B6ZQ.SQUARE2.jpg http://cdn.instructables.com/FCN/GFSX/IO34B6ZQ/FCNGFSXIO34B6ZQ.SQUARE.jpg http://cdn.instructables.com/FCN/GFSX/IO34B6ZQ/FCNGFSXIO34B6ZQ.SMALL.jpg ahmed-ismail The project is about how can you secure your home or your store with arduino and 1sheeld.As our home and our savings are very important to us we would do anything to keep them safe and secured and as most of force entry came from breaking home windows or shop glasses as the thieves thought that the ...
By: ahmed-ismail

Continue Reading »]]>
Tue, 10 May 2016 09:22:43 PDT
Arduino - FLOOD ALARM - Using a Simple Water Level Sensor http://www.instructables.com/id/Arduino-FLOOD-ALARM-Using-a-Simple-Water-Level-Sen/
Arduino - FLOOD ALARM - Using a Simple Water Level Sensor - More DIY How To Projects]]> http://cdn.instructables.com/FPD/06YW/IO0GB61U/FPD06YWIO0GB61U.SQUARE2.jpg http://cdn.instructables.com/FPD/06YW/IO0GB61U/FPD06YWIO0GB61U.SQUARE.jpg http://cdn.instructables.com/FPD/06YW/IO0GB61U/FPD06YWIO0GB61U.SMALL.jpg vandenbrande Hello world! Today i made a simple flood alarm with a water level sensor. I do not sell these sensors on my website because they don't last very long when measuring water i will order gold coated ones and test them for a few weeks, but its very simple to build and useful for a flood alarm, beside th...
By: vandenbrande

Continue Reading »]]>
Mon, 9 May 2016 17:09:49 PDT
1sheeld control music volume and led bar with slider http://www.instructables.com/id/Control-Music-Volume-and-Ledbar-Using-Slider-of-1s/
1sheeld control music volume and led bar with slider - More DIY How To Projects]]> http://cdn.instructables.com/FH4/0WTM/INYW4SS0/FH40WTMINYW4SS0.SQUARE2.jpg http://cdn.instructables.com/FH4/0WTM/INYW4SS0/FH40WTMINYW4SS0.SQUARE.jpg http://cdn.instructables.com/FH4/0WTM/INYW4SS0/FH40WTMINYW4SS0.SMALL.jpg ahmed-ismail do you want to visualize the music volume on a led bar?we will make it easy as breathing specially when using the amazing 1sheeld.The project is about how to control the music volume and visualize the volume level on a led bar in an easy way by using the amazing 1sheeld. 1sheeld turns your smart p...
By: ahmed-ismail

Continue Reading »]]>
Sun, 8 May 2016 18:36:29 PDT
3D Printed Remote Controlled BB8 Droid - Make Course http://www.instructables.com/id/3D-Printed-Remote-Controlled-BB8-Droid/
3D Printed Remote Controlled BB8 Droid - Make Course - More DIY How To Projects]]> http://cdn.instructables.com/FM8/KEV6/INUUZBHL/FM8KEV6INUUZBHL.SQUARE2.jpg http://cdn.instructables.com/FM8/KEV6/INUUZBHL/FM8KEV6INUUZBHL.SQUARE.jpg http://cdn.instructables.com/FM8/KEV6/INUUZBHL/FM8KEV6INUUZBHL.SMALL.jpg jdl92990 This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com)Hello Guys, This is my final project for the Make Course at USF. We were able to build anything we wanted, as long as it operated with the Arduino platform...
By: jdl92990

Continue Reading »]]>
Thu, 5 May 2016 20:37:36 PDT
Arduino Project in 5 Minutes http://www.instructables.com/id/Arduino-Project-in-5-Minutes/
Arduino Project in 5 Minutes - More DIY How To Projects]]> http://cdn.instructables.com/FUJ/QC92/INS155FW/FUJQC92INS155FW.SQUARE2.jpg http://cdn.instructables.com/FUJ/QC92/INS155FW/FUJQC92INS155FW.SQUARE.jpg http://cdn.instructables.com/FUJ/QC92/INS155FW/FUJQC92INS155FW.SMALL.jpg Circuito io In the following Instructable, we'll show you how you can make your next Arduino project in just 5 minutes.It's simple, easy and fun. Enjoy! :) Plan it! 1. Go to Circuito.io2. Select the components in the screenshot, add a description and your email and click "Send" 3. Instantly receive schematic...
By: Circuito io

Continue Reading »]]>
Wed, 4 May 2016 02:13:39 PDT
Smartcube tutorial http://www.instructables.com/id/Smartcube-Tutorial/
Smartcube tutorial - More DIY How To Projects]]> http://cdn.instructables.com/FQ4/YU05/INRQX699/FQ4YU05INRQX699.SQUARE2.jpg http://cdn.instructables.com/FQ4/YU05/INRQX699/FQ4YU05INRQX699.SQUARE.jpg http://cdn.instructables.com/FQ4/YU05/INRQX699/FQ4YU05INRQX699.SMALL.jpg lcomito Smartcube is an opensource notification lamp, easy to make and a real elegant object.For this project you will need: Particle photon6 RGB diffused LEDs (common cathode)Breadboard & wires Let's get started! Let's make the circuit The connections are very simple, just wire RGB leds to the correspon...
By: lcomito

Continue Reading »]]>
Tue, 3 May 2016 12:45:02 PDT
Quick PCB Prototyping - Where to Make Our Own PCB ? http://www.instructables.com/id/Quick-PCB-Prototyping-Where-to-Make-Our-Own-PCB-/
Quick PCB Prototyping - Where to Make Our Own PCB ? - More DIY How To Projects]]> http://cdn.instructables.com/FJJ/9FPS/INS14Y9Y/FJJ9FPSINS14Y9Y.SQUARE2.jpg http://cdn.instructables.com/FJJ/9FPS/INS14Y9Y/FJJ9FPSINS14Y9Y.SQUARE.jpg http://cdn.instructables.com/FJJ/9FPS/INS14Y9Y/FJJ9FPSINS14Y9Y.SMALL.jpg PCBP If you don't have your own wet-etch system, you'll need to send pcb's out to be made by a companyMany companies have a "quick prototyping" option, where you get your board back within the week, but sometimes without soldermask or silkscreen. Most hobbyists use this option to make small runs of board...
By: PCBP

Continue Reading »]]>
Mon, 2 May 2016 14:30:33 PDT
Arduino RC boat http://www.instructables.com/id/Arduino-RC-Boat/
Arduino RC boat - More DIY How To Projects]]> http://cdn.instructables.com/F6H/0QU5/IOLUAEND/F6H0QU5IOLUAEND.SQUARE2.jpg http://cdn.instructables.com/F6H/0QU5/IOLUAEND/F6H0QU5IOLUAEND.SQUARE.jpg http://cdn.instructables.com/F6H/0QU5/IOLUAEND/F6H0QU5IOLUAEND.SMALL.jpg DanielR34 I found my old wooden boat and decide make it RC controlled. So I make ribs from balsa and glued them to make voluminous body allowed heavy load like battery, arduino, motor and more. Planking I used many narrow balsa strips to planking. Using pins I hold them on their place until the glue has ha...
By: DanielR34

Continue Reading »]]>
Mon, 2 May 2016 11:07:31 PDT
DIY Hot Beverage Monitor - using the DS18B20 and Arduino Nano http://www.instructables.com/id/DIY-Hot-Beverage-Monitor/
DIY Hot Beverage Monitor - using the DS18B20 and Arduino Nano - More DIY How To Projects]]> http://cdn.instructables.com/FIP/G9G0/INQ9E0XC/FIPG9G0INQ9E0XC.SQUARE2.jpg http://cdn.instructables.com/FIP/G9G0/INQ9E0XC/FIPG9G0INQ9E0XC.SQUARE.jpg http://cdn.instructables.com/FIP/G9G0/INQ9E0XC/FIPG9G0INQ9E0XC.SMALL.jpg Peder Ward My girlfriend always have a problem that she burns her tongue when she taste hot drinks. Then I started thinking, maybe I could create a device that prevents her burning her tongue, so she can drink her tea and it always have the perfect and wanted temperature. Two things I wanted to learn about in ...
By: Peder Ward

Continue Reading »]]>
Mon, 2 May 2016 10:07:01 PDT
Bluetooth PS2 Controller http://www.instructables.com/id/Bluetooth-PS2-Controller/
Bluetooth PS2 Controller - More DIY How To Projects]]> http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SQUARE2.jpg http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SQUARE.jpg http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SMALL.jpg EvanKale The original PlayStation 2 controller is still a solid and well-built controller by today's standards. Better yet, they can be had nowadays for a fraction of the cost of a controller with the same quality.Today we're bringing this 15-year-old controller back from the dead and turning it into a Bluet...
By: EvanKale

Continue Reading »]]>
Fri, 29 Apr 2016 08:14:19 PDT