http://www.instructables.com Mon, 20 May 2013 02:36:38 PDT BLOX v1.01 http://www.instructables.com/id/Arduino-plex-20-Modular-Plexiglas-Arduino-Work-S/
Arduino-plex 2.0: Modular Plexiglas Arduino Work Surface - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F8Q/JNWS/HFD197AP/F8QJNWSHFD197AP.SQUARE2.jpg http://www.instructables.com/files/deriv/F8Q/JNWS/HFD197AP/F8QJNWSHFD197AP.SQUARE.jpg http://www.instructables.com/files/deriv/F8Q/JNWS/HFD197AP/F8QJNWSHFD197AP.SMALL.jpg ProfMuggs Last year I needed a board that I could stick my breadboards to, that would also securely hold my Arduino. I used some Plexiglas I picked up at Skycraft in Orlando and I glued everything together with Crazy Glue. This worked well, but it didn't give me the freedom to reconfigure or put something on ...
By: ProfMuggs

Continue Reading »]]> Wed, 17 Apr 2013 09:10:39 PDT http://www.instructables.com/id/Self-Contained-7x7x7-LED-Cube/
Self-Contained 7x7x7 LED Cube - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FOI/TAS9/HFD15T3K/FOITAS9HFD15T3K.SQUARE2.jpg http://www.instructables.com/files/deriv/FOI/TAS9/HFD15T3K/FOITAS9HFD15T3K.SQUARE.jpg http://www.instructables.com/files/deriv/FOI/TAS9/HFD15T3K/FOITAS9HFD15T3K.SMALL.jpg lopuz3 LED cubes are true 3D displays that work by lighting up points in a 3D lattice of LEDs. On the 3D display you can produce some truly mesmerizing animations.  This Instructable will walk you through creating an LED cube for yourself that is completely self-contained and powered by an Arduino Mega.  ...
By: lopuz3

Continue Reading »]]> Mon, 15 Apr 2013 00:29:00 PDT http://www.instructables.com/id/4x4x4-RGB-LED-Cube/
4x4x4 RGB LED Cube - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FU3/LYGX/H1JUJ5EC/FU3LYGXH1JUJ5EC.SQUARE2.jpg http://www.instructables.com/files/deriv/FU3/LYGX/H1JUJ5EC/FU3LYGXH1JUJ5EC.SQUARE.jpg http://www.instructables.com/files/deriv/FU3/LYGX/H1JUJ5EC/FU3LYGXH1JUJ5EC.SMALL.jpg emihackr97 A while ago, when I first started using Arduino, my first project was a 4x4x4 LED cube, I built it from a Guide I found here in Instructables, I didn't know anything about programming, and little about electronics, yet I was able to build it and make it work, I didn't know how it worked but it did! ...
By: emihackr97

Continue Reading »]]> Mon, 30 Apr 2012 22:29:16 PDT http://www.instructables.com/id/Tempduino-Arduino-Based-Temp-and-Humidity-Displa/
Tempduino - Arduino Based Temp and Humidity Display - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F7K/0FSA/HDOW41MB/F7K0FSAHDOW41MB.SQUARE2.jpg http://www.instructables.com/files/deriv/F7K/0FSA/HDOW41MB/F7K0FSAHDOW41MB.SQUARE.jpg http://www.instructables.com/files/deriv/F7K/0FSA/HDOW41MB/F7K0FSAHDOW41MB.SMALL.jpg Ktulu_1 The temperature in my office at work varies quite a bit depending on the time of day, season, and the whims of the other people I share the floor with. When I’m sitting at my desk shaking uncontrollably or sweating profusely it would be nice to know if it’s due to the temperature or just work relate...
By: Ktulu_1

Continue Reading »]]> Wed, 6 Mar 2013 13:25:41 PST http://www.instructables.com/id/Homemade-Infrared-Rangefinder-Similar-to-Sharp-GP/
Homemade Infrared Rangefinder (Similar to Sharp GP2D120 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FBQ/IDJH/HBHGIVUX/FBQIDJHHBHGIVUX.SQUARE2.jpg http://www.instructables.com/files/deriv/FBQ/IDJH/HBHGIVUX/FBQIDJHHBHGIVUX.SQUARE.jpg http://www.instructables.com/files/deriv/FBQ/IDJH/HBHGIVUX/FBQIDJHHBHGIVUX.SMALL.jpg pyrohaz Here is my instructable on how to construct a pretty simple (for some!) short range infrared rangefinder/range sensor. Infrared rangefinders are very useful in a number of projects. The majority of these come from obstacle detection (in robots) or generally detecting distances! The one shown here is...
By: pyrohaz

Continue Reading »]]> Sun, 6 Jan 2013 20:48:28 PST http://www.instructables.com/id/Nama-Instrument-10/
Nama Instrument 1.0 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FYJ/BTJ2/HAQ320KB/FYJBTJ2HAQ320KB.SQUARE2.jpg http://www.instructables.com/files/deriv/FYJ/BTJ2/HAQ320KB/FYJBTJ2HAQ320KB.SQUARE.jpg http://www.instructables.com/files/deriv/FYJ/BTJ2/HAQ320KB/FYJBTJ2HAQ320KB.SMALL.jpg lgguts A motion sensing soft-circuit interface. The following instructable will guide you through the construction of your own personalized Nama Instrument. I'd love to hear some feedback. Hope you like it and it serves you somehow! : ) Access http://www.viraseres.com/nama to download the project's open s...
By: lgguts

Continue Reading »]]> Tue, 15 Jan 2013 02:31:20 PST http://www.instructables.com/id/vacuum-form-an-arduinoelectronics-enclosure/
vacuum form an arduino/electronics enclosure - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F6X/INKT/H5E9PRY4/F6XINKTH5E9PRY4.SQUARE2.jpg http://www.instructables.com/files/deriv/F6X/INKT/H5E9PRY4/F6XINKTH5E9PRY4.SQUARE.jpg http://www.instructables.com/files/deriv/F6X/INKT/H5E9PRY4/F6XINKTH5E9PRY4.SMALL.jpg gabriellalevine If you have access to a vacuum former, or have constructed a DIY one to use, simply vacuum form a compact case to house your standalone electronics or arduino project.  I made this at techshop! www.techshop.ws Bill of materials Material to vacuum form (acrylic, pvc, pet-g, styrene...) a mold (ma...
By: gabriellalevine

Continue Reading »]]> Fri, 3 Aug 2012 06:46:42 PDT http://www.instructables.com/id/Arduino-Timer-Interrupts/
Arduino Timer Interrupts - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FYT/ZLFY/H3Z3SUFM/FYTZLFYH3Z3SUFM.SQUARE2.jpg http://www.instructables.com/files/deriv/FYT/ZLFY/H3Z3SUFM/FYTZLFYH3Z3SUFM.SQUARE.jpg http://www.instructables.com/files/deriv/FYT/ZLFY/H3Z3SUFM/FYTZLFYH3Z3SUFM.SMALL.jpg amandaghassaei Timer interrupts allow you to perform a task at very specifically timed intervals regardless of what else is going on in your code.  In this instructable I'll explain how to setup and execute an interrupt in Clear Timer on Compare Match or CTC Mode.  Jump straight to step 2 if you are looking for sa...
By: amandaghassaei

Continue Reading »]]> Sun, 8 Jul 2012 23:17:04 PDT http://www.instructables.com/id/Step-by-Step-Guide-to-the-Arduino-Leonardo/
Step by Step Guide to the Arduino Leonardo - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FKG/SUDY/H3XN8LEG/FKGSUDYH3XN8LEG.SQUARE2.jpg http://www.instructables.com/files/deriv/FKG/SUDY/H3XN8LEG/FKGSUDYH3XN8LEG.SQUARE.jpg http://www.instructables.com/files/deriv/FKG/SUDY/H3XN8LEG/FKGSUDYH3XN8LEG.SMALL.jpg ProvideYourOwn The Arduino team is now shipping their latest creation - the Leonardo. It is the first Arduino to use Atmel’s ATmegaXU4 series chip with built-in USB. This change is big and it has big benefits. In addition to the built-in USB, it offers more digital and analog pins. This step by step  guide gives y...
By: ProvideYourOwn

Continue Reading »]]> Wed, 27 Jun 2012 16:28:46 PDT http://www.instructables.com/id/Arduino-Chicken-Coop-Controller/
Arduino Chicken Coop Controller - More DIY How To Projects]]> http://cdn.instructables.com/FSJ/L1TW/H045ZMTQ/FSJL1TWH045ZMTQ.SQUARE2.jpg http://cdn.instructables.com/FSJ/L1TW/H045ZMTQ/FSJL1TWH045ZMTQ.SQUARE.jpg http://cdn.instructables.com/FSJ/L1TW/H045ZMTQ/FSJL1TWH045ZMTQ.SMALL.jpg Robot-Chicken Over the last few years my family has been keeping ex-battery hens - they are about 18 months old and have had a horrendous life kept cooped up in small cages in large warehouses.  As much as we love these little bundles of joys and eggs it can be a drudge getting up in the early morning letting the...
By: Robot-Chicken

Continue Reading »]]> Thu, 5 Apr 2012 08:56:59 PDT http://www.instructables.com/id/How-to-Build-a-Robotic-Hand-with-Haptic-Feedback/
How to Build a Robotic Hand with Haptic Feedback - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJY/5JQ6/H0FLR1LN/FJY5JQ6H0FLR1LN.SQUARE2.jpg http://www.instructables.com/files/deriv/FJY/5JQ6/H0FLR1LN/FJY5JQ6H0FLR1LN.SQUARE.jpg http://www.instructables.com/files/deriv/FJY/5JQ6/H0FLR1LN/FJY5JQ6H0FLR1LN.SMALL.jpg macgyver603 For science fair this year, I felt like building something instead of doing an experiment. All I needed to do was look around Instructables for a project idea. I was inspired by njkl44's robotic hand since it reminds me so much of stuff out of science fiction movies. My goal was to create a system o...
By: macgyver603

Continue Reading »]]> Sat, 31 Mar 2012 23:11:42 PDT http://www.instructables.com/id/LED-Binary-Clock-1/
LED Binary Clock - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FSO/YSCN/GS3BEHBB/FSOYSCNGS3BEHBB.SQUARE2.jpg http://www.instructables.com/files/deriv/FSO/YSCN/GS3BEHBB/FSOYSCNGS3BEHBB.SQUARE.jpg http://www.instructables.com/files/deriv/FSO/YSCN/GS3BEHBB/FSOYSCNGS3BEHBB.SMALL.jpg emihackr97 A Binary Clock! I was recently looking at some binary clocks and I felt like Why not? I have everything to make one and I don't have a clock in my room. So I decided to build one and here it is. Hope you Like it and maybe build your own. It's a cool project because it's your very own, unique clock...
By: emihackr97

Continue Reading »]]> Thu, 8 Sep 2011 20:06:31 PDT http://www.instructables.com/id/Ardu-pong-the-Arduino-based-pong-console/
Ardu-pong! the Arduino based pong console - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FXH/NHAZ/GFMCD32F/FXHNHAZGFMCD32F.SQUARE2.jpg http://www.instructables.com/files/deriv/FXH/NHAZ/GFMCD32F/FXHNHAZGFMCD32F.SQUARE.jpg http://www.instructables.com/files/deriv/FXH/NHAZ/GFMCD32F/FXHNHAZGFMCD32F.SMALL.jpg kyle brinkerhoff A while back the instructables robot made a post on Facebook about some guys who played pong on an Arduino (http://wayneandlayne.com/projects/video-game-shield/games/#pong) but after looking around, i saw that everyone who did this was only worried about making it work. and often resulted as a very ...
By: kyle brinkerhoff

Continue Reading »]]> Mon, 25 Oct 2010 10:24:46 PDT http://www.instructables.com/id/DIY-3D-Controller/
DIY 3D Controller - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SQUARE2.jpg http://www.instructables.com/files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SQUARE.jpg http://www.instructables.com/files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SMALL.jpg kylemcdonald Make a 3D interface using an six resistors, aluminum foil, and an Arduino. Take that, Wii. Update: a much more thorough explanation of this project is available from Make Magazine. It might be easier to follow their instructions, and I think their code is more up to date. The basic goal here was t...
By: kylemcdonald

Continue Reading »]]> Mon, 21 Jul 2008 23:08:55 PDT