Instructables: exploring - technology - arduino - servo http://www.instructables.com Fri, 19 Dec 2014 05:54:59 PST BLOX v1.01 Servo Controlled by Pushbuttons http://www.instructables.com/id/Servo-Controlled-by-Pushbuttons/
Servo Controlled by Pushbuttons - More DIY How To Projects]]> http://cdn.instructables.com/FAA/W4PK/I3THDADZ/FAAW4PKI3THDADZ.SQUARE2.jpg http://cdn.instructables.com/FAA/W4PK/I3THDADZ/FAAW4PKI3THDADZ.SQUARE.jpg http://cdn.instructables.com/FAA/W4PK/I3THDADZ/FAAW4PKI3THDADZ.SMALL.jpg gavinkeeley Using an Arduino to control a servo motor with the use of two pushbuttons. Get the appropriate components 1) Arduino2) Breadboard3) Push Buttons4) Jumper Cables5) Two 10k Ohm Resistors6) Servo MotorRecommended online storeshttps://www.dx.com/s/arduino62295959 Connect the power Connect the GND ...
By: gavinkeeley

Continue Reading »]]>
Thu, 18 Dec 2014 10:38:23 PST
How to Build an RFID Deadbolt Controller http://www.instructables.com/id/How-to-Build-an-RFID-Deadbolt-Controller/
How to Build an RFID Deadbolt Controller - More DIY How To Projects]]> http://cdn.instructables.com/F7C/XWKO/I3H56T2B/F7CXWKOI3H56T2B.SQUARE2.jpg http://cdn.instructables.com/F7C/XWKO/I3H56T2B/F7CXWKOI3H56T2B.SQUARE.jpg http://cdn.instructables.com/F7C/XWKO/I3H56T2B/F7CXWKOI3H56T2B.SMALL.jpg jasonsweeney This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com)This guide will walk you through how to build an electronic deadbolt lock actuator which can be controlled via an RFID card and reader, an IR remote and se...
By: jasonsweeney

Continue Reading »]]>
Sun, 14 Dec 2014 10:21:09 PST
Animatronic Wolf head http://www.instructables.com/id/Animatronic-Wolf-head/
Animatronic Wolf head - More DIY How To Projects]]> http://cdn.instructables.com/FD6/FFTT/I3KC2QV5/FD6FFTTI3KC2QV5.SQUARE2.jpg http://cdn.instructables.com/FD6/FFTT/I3KC2QV5/FD6FFTTI3KC2QV5.SQUARE.jpg http://cdn.instructables.com/FD6/FFTT/I3KC2QV5/FD6FFTTI3KC2QV5.SMALL.jpg aunumwolf42 Hey everyone!This is a tutorial on how to make your very own motion following undead wolf. The Original idea was to make a following head along with a jaw that move depending on how close someone is. Just a note this is a rough draft for a project that I am continuously developing, so by the end I h...
By: aunumwolf42

Continue Reading »]]>
Sun, 14 Dec 2014 09:56:02 PST
Naughty / Nice Meter - The Making Of - Part 2 of 2 http://www.instructables.com/id/Naughty-Nice-Meter-The-Making-Of-Part-2-of-2/
Naughty / Nice Meter - The Making Of - Part 2 of 2 - More DIY How To Projects]]> http://cdn.instructables.com/FV1/325J/I3N2AHE4/FV1325JI3N2AHE4.SQUARE2.jpg http://cdn.instructables.com/FV1/325J/I3N2AHE4/FV1325JI3N2AHE4.SQUARE.jpg http://cdn.instructables.com/FV1/325J/I3N2AHE4/FV1325JI3N2AHE4.SMALL.jpg cdsgraphic In part 1 (found here) of this two part Instructable we learned how to get the electronics working for the Naughty / Nice Meter... Now we're going to build the "housing" for everything to fit into.The Materials for this part of the project can be less than $5...And here is a video of the "completed"...
By: cdsgraphic

Continue Reading »]]>
Sat, 13 Dec 2014 13:56:24 PST
Aurduino + Android + Bluetooth = Naughty / Nice Meter - Part 1 of 2 http://www.instructables.com/id/Aurduino-Android-Bluetooth-Naughty-Nice-Meter-Part/
Aurduino + Android + Bluetooth = Naughty / Nice Meter - Part 1 of 2 - More DIY How To Projects]]> http://cdn.instructables.com/F6V/R3HS/I3H77PVL/F6VR3HSI3H77PVL.SQUARE2.jpg http://cdn.instructables.com/F6V/R3HS/I3H77PVL/F6VR3HSI3H77PVL.SQUARE.jpg http://cdn.instructables.com/F6V/R3HS/I3H77PVL/F6VR3HSI3H77PVL.SMALL.jpg cdsgraphic This is Part 1 of a 2 part Instructable.Part 1 is about getting the electronics to work.Part 2 will be about putting it all together into what we'll call the "Naughty / Nice Meter" -or- "The best damn way to get my daughter to behave I've found in years, Meter ! ! !"Jump to part 2 here.This project ...
By: cdsgraphic

Continue Reading »]]>
Thu, 11 Dec 2014 08:12:53 PST
Kid-friendly PuppyDuino 0.31 http://www.instructables.com/id/Kid-friendly-PuppyDuino-031/
Kid-friendly PuppyDuino 0.31 - More DIY How To Projects]]> http://cdn.instructables.com/FIK/R9VZ/I2KSPEUY/FIKR9VZI2KSPEUY.SQUARE2.jpg http://cdn.instructables.com/FIK/R9VZ/I2KSPEUY/FIKR9VZI2KSPEUY.SQUARE.jpg http://cdn.instructables.com/FIK/R9VZ/I2KSPEUY/FIKR9VZI2KSPEUY.SMALL.jpg alhazen OK, this is not a fully autonomous "get you a beer, open it for you and then tweet about it" robodog (yet ;) but if you're itching to get past the blinky lights on a breadboard stage with your Arduino and you're ten or know somebody that's ten this might appeal to you.This is actually the first publ...
By: alhazen

Continue Reading »]]>
Mon, 17 Nov 2014 20:59:49 PST
Arduino thumbstick controller http://www.instructables.com/id/Arduino-thumbstick-controller/
Arduino thumbstick controller - More DIY How To Projects]]> http://cdn.instructables.com/FN4/CNPG/I2LM4E06/FN4CNPGI2LM4E06.SQUARE2.jpg http://cdn.instructables.com/FN4/CNPG/I2LM4E06/FN4CNPGI2LM4E06.SQUARE.jpg http://cdn.instructables.com/FN4/CNPG/I2LM4E06/FN4CNPGI2LM4E06.SMALL.jpg biomech75 In this project I will help you to put together a simple and from scratch Arduino thumbstick controller, to control your projects (servos & DC motors). This is a simple guide to help out new Arduino users on their projects but requires a little soldering (no skill needed). This Instructurable is way...
By: biomech75

Continue Reading »]]>
Mon, 17 Nov 2014 11:56:22 PST
How to make an arduino "get off my property" machine http://www.instructables.com/id/How-to-make-an-arduino-get-off-my-property-machine/
How to make an arduino "get off my property" machine - More DIY How To Projects]]> http://cdn.instructables.com/FDA/A5IM/I2KS77LC/FDAA5IMI2KS77LC.SQUARE2.jpg http://cdn.instructables.com/FDA/A5IM/I2KS77LC/FDAA5IMI2KS77LC.SQUARE.jpg http://cdn.instructables.com/FDA/A5IM/I2KS77LC/FDAA5IMI2KS77LC.SMALL.jpg SufferKevyn901 This instructable will show you how to make my arduino "get off my property" machine. The sole purpose of this machine is to remove objects placed on it. The video above explains this very well. Supplies Materials:X2: 7cm * 9cm PCB'sSome duct tape (colored if you want it to look nice)X1: 27Kg ser...
By: SufferKevyn901

Continue Reading »]]>
Sun, 16 Nov 2014 11:35:54 PST
RFID treasure box http://www.instructables.com/id/RFID-treasure-box/
RFID treasure box - More DIY How To Projects]]> http://cdn.instructables.com/FGX/FVF0/I2AIK64W/FGXFVF0I2AIK64W.SQUARE2.jpg http://cdn.instructables.com/FGX/FVF0/I2AIK64W/FGXFVF0I2AIK64W.SQUARE.jpg http://cdn.instructables.com/FGX/FVF0/I2AIK64W/FGXFVF0I2AIK64W.SMALL.jpg kurt-beheydt A box with rfid reader, lcd display and servo to open a bolt. Built as a treasure hunt for a birthday party of 7-year old daughter.Children had to collect five RFID-cards and swipe them in a correct order over the box to open the box and find the chocolate coins inside.(Texts in the pictures are in ...
By: kurt-beheydt

Continue Reading »]]>
Sun, 9 Nov 2014 08:17:11 PST
Candy Monster Plant http://www.instructables.com/id/Candy-Monster-Plant/
Candy Monster Plant - More DIY How To Projects]]> http://cdn.instructables.com/FSV/NKO4/I1XEUKHL/FSVNKO4I1XEUKHL.SQUARE2.jpg http://cdn.instructables.com/FSV/NKO4/I1XEUKHL/FSVNKO4I1XEUKHL.SQUARE.jpg http://cdn.instructables.com/FSV/NKO4/I1XEUKHL/FSVNKO4I1XEUKHL.SMALL.jpg kevinPlayTime This project came about from many different directions. One was that I want to try making something that was animatronic. Secondly, I was getting ready for Halloween and looking for something new to make for Halloween. Lastly, I thought that my potted Zombie hand need some company. Since the zombie ...
By: kevinPlayTime

Continue Reading »]]>
Sat, 1 Nov 2014 15:29:06 PDT
Time-lapse with any camera, using Arduino http://www.instructables.com/id/Time-lapse-with-any-camera-using-Arduino/
Time-lapse with any camera, using Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FF8/ZM1Y/I1NEF3QC/FF8ZM1YI1NEF3QC.SQUARE2.jpg http://cdn.instructables.com/FF8/ZM1Y/I1NEF3QC/FF8ZM1YI1NEF3QC.SQUARE.jpg http://cdn.instructables.com/FF8/ZM1Y/I1NEF3QC/FF8ZM1YI1NEF3QC.SMALL.jpg Switch and Lever Sometimes you find yourself in a situation where you want to capture situations where filming would be entirely impractical, or even impossible. For those moments time-lapse photography is a god-send, until you realize that your camera did not ship with that feature and there seems to be no way arou...
By: Switch and Lever

Continue Reading »]]>
Fri, 24 Oct 2014 09:20:06 PDT
Get started with the Bend Sensor http://www.instructables.com/id/Bend-Sensor/
Get started with the Bend Sensor - More DIY How To Projects]]> http://cdn.instructables.com/FQ8/X12G/I12KISVN/FQ8X12GI12KISVN.SQUARE2.jpg http://cdn.instructables.com/FQ8/X12G/I12KISVN/FQ8X12GI12KISVN.SQUARE.jpg http://cdn.instructables.com/FQ8/X12G/I12KISVN/FQ8X12GI12KISVN.SMALL.jpg cecilise We started by looking at how the Bend Sensor is buildt up, and how it works.We then looked at different areas we can see it beeing used in.Finally we made a lamp were you can change colour of the light, and also the brightness of a LED.You will find the steps of how to make your own lamp, including ...
By: cecilise

Continue Reading »]]>
Fri, 10 Oct 2014 10:43:55 PDT
Ardu-Lazy: Turn off the lights with a laser pointer! http://www.instructables.com/id/Ardu-Lazy-Turn-off-the-lights-with-a-laser-pointer/
Ardu-Lazy: Turn off the lights with a laser pointer! - More DIY How To Projects]]> http://cdn.instructables.com/FI3/CT08/I0ENNF69/FI3CT08I0ENNF69.SQUARE2.jpg http://cdn.instructables.com/FI3/CT08/I0ENNF69/FI3CT08I0ENNF69.SQUARE.jpg http://cdn.instructables.com/FI3/CT08/I0ENNF69/FI3CT08I0ENNF69.SMALL.jpg jcastrillon restrepo Hi!This is my first instructable and i tought of doing it about a thing i did a while ago. First i would like to give you a general overview of the project: Its basically a photoresistor which gives a signal to arduino when the laser is pointed at it, and arduino "orders" a servo-motor to move and t...
By: jcastrillon restrepo

Continue Reading »]]>
Tue, 23 Sep 2014 23:12:08 PDT
REMIX - Simple Arduino Keypad http://www.instructables.com/id/REMIX-Simple-Arduino-Keypad/
REMIX - Simple Arduino Keypad - More DIY How To Projects]]> http://cdn.instructables.com/FS1/G9IW/I0C8WVQM/FS1G9IWI0C8WVQM.SQUARE2.jpg http://cdn.instructables.com/FS1/G9IW/I0C8WVQM/FS1G9IWI0C8WVQM.SQUARE.jpg http://cdn.instructables.com/FS1/G9IW/I0C8WVQM/FS1G9IWI0C8WVQM.SMALL.jpg r_anderson_c This is a REMIX of gtr_stitch's Arduino Keypad. This is a simple keypad to use for just a few buttons There are Arduino libraries available for using an actual keypad. I made a few modifications of the original author's project. I omitted the LCD and only used 4 button switches.I aim to use this...
By: r_anderson_c

Continue Reading »]]>
Sun, 21 Sep 2014 10:25:30 PDT
Coupled LED-Servo controller using Arduino http://www.instructables.com/id/Coupled-LED-Servo-controller-using-Arduino/
Coupled LED-Servo controller using Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FFY/4SC7/HZQTEO9T/FFY4SC7HZQTEO9T.SQUARE2.jpg http://cdn.instructables.com/FFY/4SC7/HZQTEO9T/FFY4SC7HZQTEO9T.SQUARE.jpg http://cdn.instructables.com/FFY/4SC7/HZQTEO9T/FFY4SC7HZQTEO9T.SMALL.jpg Bhanu Kishan Hi Everybody, this will be my first DIY project using Arduino and an entry to the maker community. Ever since I watched the TED video by Massimo Banzi, I was waiting for this day to publish my Arduino project . This is a very simple project, so please go easy on me.Current project is a simple intera...
By: Bhanu Kishan

Continue Reading »]]>
Sat, 6 Sep 2014 16:31:16 PDT
Motion Controlled Ultrasonic Lamp http://www.instructables.com/id/Motion-Controlled-Ultrasonic-Lamp/
Motion Controlled Ultrasonic Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FJN/HI55/HZK9BLBW/FJNHI55HZK9BLBW.SQUARE2.jpg http://cdn.instructables.com/FJN/HI55/HZK9BLBW/FJNHI55HZK9BLBW.SQUARE.jpg http://cdn.instructables.com/FJN/HI55/HZK9BLBW/FJNHI55HZK9BLBW.SMALL.jpg gigafide Recently I've been learning about Ultrasonic waves and how to harness their power. It's simple enough to make some type of sonar device, but I wanted to take at a step cooler and see if I could use Ultrasonic waves to not only detect movement, but also the direction of that movement. So let's take i...
By: gigafide

Continue Reading »]]>
Mon, 1 Sep 2014 14:19:14 PDT
Animatronic Eyes and Wii Nunchuck Part 2 - Give it a Voice http://www.instructables.com/id/Animatronic-Eyes-and-Wii-Nunchuck-Part-2-Give-it-a/
Animatronic Eyes and Wii Nunchuck Part 2 - Give it a Voice - More DIY How To Projects]]> http://cdn.instructables.com/FRT/OAXO/HZH6XQDQ/FRTOAXOHZH6XQDQ.SQUARE2.jpg http://cdn.instructables.com/FRT/OAXO/HZH6XQDQ/FRTOAXOHZH6XQDQ.SQUARE.jpg http://cdn.instructables.com/FRT/OAXO/HZH6XQDQ/FRTOAXOHZH6XQDQ.SMALL.jpg techiebot After I built the animatronic eyes in PART 1, I wanted to complete the face with a voice and possibly moving eyebrows. If you look back at my PART 1, you'll see that for the base I used a model from Thingiverse. Once you have the model 3D printed, you will need to add in the 9 gram servos. ...
By: techiebot

Continue Reading »]]>
Sun, 31 Aug 2014 09:19:18 PDT
Rana: An arduino inspired biological robot http://www.instructables.com/id/Rana-An-arduino-inspired-biological-robot/
Rana: An arduino inspired biological robot - More DIY How To Projects]]> http://cdn.instructables.com/FNL/GRN5/HZDYHUO2/FNLGRN5HZDYHUO2.SQUARE2.jpg http://cdn.instructables.com/FNL/GRN5/HZDYHUO2/FNLGRN5HZDYHUO2.SQUARE.jpg http://cdn.instructables.com/FNL/GRN5/HZDYHUO2/FNLGRN5HZDYHUO2.SMALL.jpg leadzeplin Rana (Italian for frog) is a biological inspired robot. It is the outcome of months of research and development. One of the principals applied comes from another intractable I made called "arduino biped robot". This robot uses the combined walking methods of an ant and a frog. This ensure that the r...
By: leadzeplin

Continue Reading »]]>
Thu, 28 Aug 2014 18:15:56 PDT
Using Servos with Arduino made easy ! http://www.instructables.com/id/Using-Servos-with-Arduino-made-easy-/
Using Servos with Arduino made easy ! - More DIY How To Projects]]> http://cdn.instructables.com/FGY/ADXD/HYVDOEWX/FGYADXDHYVDOEWX.SQUARE2.jpg http://cdn.instructables.com/FGY/ADXD/HYVDOEWX/FGYADXDHYVDOEWX.SQUARE.jpg http://cdn.instructables.com/FGY/ADXD/HYVDOEWX/FGYADXDHYVDOEWX.SMALL.jpg electro18 Servomotors or simply servos are essential components of a robot which convert electrical energy into mechanical energy.They are widely used in the field of RC hobby and robotics. But unlike simple geared motors , these servos are made by integrating a geared motor with a position feedback circuit w...
By: electro18

Continue Reading »]]>
Fri, 15 Aug 2014 09:52:46 PDT
NFC Ring Lock Box http://www.instructables.com/id/NFC-Ring-Lock-Box/
NFC Ring Lock Box - More DIY How To Projects]]> http://cdn.instructables.com/FHT/LNKC/HYHG7R4H/FHTLNKCHYHG7R4H.SQUARE2.jpg http://cdn.instructables.com/FHT/LNKC/HYHG7R4H/FHTLNKCHYHG7R4H.SQUARE.jpg http://cdn.instructables.com/FHT/LNKC/HYHG7R4H/FHTLNKCHYHG7R4H.SMALL.jpg Nairod785 Hi everybody!Welcome to my first instructable! I apologize in advance for my poor level in English.In this step-by-step guide I am going to teach you how to build a simple and very cheap NFC Ring Lock Box ! What you'll need Ok first, the idea was to create a box locked from the inside. Many diffe...
By: Nairod785

Continue Reading »]]>
Tue, 5 Aug 2014 14:27:43 PDT
Servo Control with a Flex/Bend Sensor http://www.instructables.com/id/Servo-Control-with-a-FlexBend-Sensor/
Servo Control with a Flex/Bend Sensor - More DIY How To Projects]]> http://cdn.instructables.com/FF5/JCKI/HYE60MDB/FF5JCKIHYE60MDB.SQUARE2.jpg http://cdn.instructables.com/FF5/JCKI/HYE60MDB/FF5JCKIHYE60MDB.SQUARE.jpg http://cdn.instructables.com/FF5/JCKI/HYE60MDB/FF5JCKIHYE60MDB.SMALL.jpg The TuqsCat This Instructable is to demonstrate how to control a servo using a flex/bend sensor. Also a possible application for such a setup.MaterialsArduino uno http://www.adafruit.com/products/50 $24.95Solid core wire http://www.adafruit.com/products/1311 $15.95Micro Servo http://www.adafruit.com/products/...
By: The TuqsCat

Continue Reading »]]>
Tue, 5 Aug 2014 00:42:13 PDT
Hand tilt controlled car using arduino http://www.instructables.com/id/Hand-tilt-controlled-car-using-arduino/
Hand tilt controlled car using arduino - More DIY How To Projects]]> http://cdn.instructables.com/FZF/TF9M/HYC6CY2K/FZFTF9MHYC6CY2K.SQUARE2.jpg http://cdn.instructables.com/FZF/TF9M/HYC6CY2K/FZFTF9MHYC6CY2K.SQUARE.jpg http://cdn.instructables.com/FZF/TF9M/HYC6CY2K/FZFTF9MHYC6CY2K.SMALL.jpg harshalpatil199529 Hi, everyone this is my first instructables so be a little understanding. pls post ur suggestions for future instructables.I am trying to document every single step out their for the beginners who want to get started with building there own bots but have idea on how to start. this is a simple tutori...
By: harshalpatil199529

Continue Reading »]]>
Sun, 3 Aug 2014 08:52:19 PDT
SPAZNIC THE CREEP EYE SATELLITE!!! http://www.instructables.com/id/SPAZNIC-THE-CREEP-EYE-SATELLITE/
SPAZNIC THE CREEP EYE SATELLITE!!! - More DIY How To Projects]]> http://cdn.instructables.com/F5T/HCJG/HYCSWAE2/F5THCJGHYCSWAE2.SQUARE2.jpg http://cdn.instructables.com/F5T/HCJG/HYCSWAE2/F5THCJGHYCSWAE2.SQUARE.jpg http://cdn.instructables.com/F5T/HCJG/HYCSWAE2/F5THCJGHYCSWAE2.SMALL.jpg Kenshow6873 Introducing Spaznic the Creep Eye Satellite!!This is an arduino project that is a variation of the Halloween Props That Turn to Look at You as you Walk by DIY Hacks and How Tos.What you will need for this project: Styrofoam sphere ( 2 seperate halves) Servo Plastidip Soldering Iron Hot glue gun Meta...
By: Kenshow6873

Continue Reading »]]>
Sat, 2 Aug 2014 20:30:17 PDT
Bluetooth Robot with computer Interface http://www.instructables.com/id/Bluetooth-Robot-with-computer-Interface/
Bluetooth Robot with computer Interface - More DIY How To Projects]]> http://cdn.instructables.com/F5C/4V8O/HY4KVKLB/F5C4V8OHY4KVKLB.SQUARE2.jpg http://cdn.instructables.com/F5C/4V8O/HY4KVKLB/F5C4V8OHY4KVKLB.SQUARE.jpg http://cdn.instructables.com/F5C/4V8O/HY4KVKLB/F5C4V8OHY4KVKLB.SMALL.jpg stuartrucker Control the motion of a two-wheeled robot wirelessly from a virtual remote on the computer screen. Using the bluetooth HC-06 receiver and two continuous rotation servos, an Arduino based robot can be programmed to receive values over bluetooth and control the robot accordingly. These control values ...
By: stuartrucker

Continue Reading »]]>
Mon, 28 Jul 2014 16:11:22 PDT
Infrared Tracking Camera Mount http://www.instructables.com/id/Infrared-Tracking-Camera-Mount/
Infrared Tracking Camera Mount - More DIY How To Projects]]> http://cdn.instructables.com/FMK/UTQQ/HY12M6SM/FMKUTQQHY12M6SM.SQUARE2.jpg http://cdn.instructables.com/FMK/UTQQ/HY12M6SM/FMKUTQQHY12M6SM.SQUARE.jpg http://cdn.instructables.com/FMK/UTQQ/HY12M6SM/FMKUTQQHY12M6SM.SMALL.jpg MrSirLRD This Instructable shows you how to make a camera mount that will track a 200Hz pulsing infrared (IR) light source. Tracking this 200Hz pulsing source and not simply the brightest IR light, makes this system more resilient to background IR noise. Although in this build i used my phone (Samsung S3) as...
By: MrSirLRD

Continue Reading »]]>
Sat, 26 Jul 2014 23:49:06 PDT
Arduino/Twitter Mets Apple http://www.instructables.com/id/Twitter-Activated-Home-Run-Indicator/
Arduino/Twitter Mets Apple - More DIY How To Projects]]> http://cdn.instructables.com/FO9/MCM7/HY9Y3C25/FO9MCM7HY9Y3C25.SQUARE2.jpg http://cdn.instructables.com/FO9/MCM7/HY9Y3C25/FO9MCM7HY9Y3C25.SQUARE.jpg http://cdn.instructables.com/FO9/MCM7/HY9Y3C25/FO9MCM7HY9Y3C25.SMALL.jpg ProfMuggs Whenever I go to Citi Field with my kids to see the Mets, they go crazy for the Home Run Apple.To me, the Apple is part of what makes baseball exciting for kids. Even though my kids may not watch most of the games, I still enjoy bringing them along. The Home Run Apple started popping out of a top ha...
By: ProfMuggs

Continue Reading »]]>
Thu, 24 Jul 2014 21:36:42 PDT
Keypad lock with servo using ATtiny84 http://www.instructables.com/id/Keypad-lock-with-servo-using-ATtiny84/
Keypad lock with servo using ATtiny84 - More DIY How To Projects]]> http://cdn.instructables.com/FQF/PB3N/HXXHHVTU/FQFPB3NHXXHHVTU.SQUARE2.jpg http://cdn.instructables.com/FQF/PB3N/HXXHHVTU/FQFPB3NHXXHHVTU.SQUARE.jpg http://cdn.instructables.com/FQF/PB3N/HXXHHVTU/FQFPB3NHXXHHVTU.SMALL.jpg sunilksree In this instructable, we will be making a combination lock to your door, with a keypad and servo, using ATtiny84.But we can't use the Servo library included in the Arduino IDE, as ATtiny84 just has 2 8-bit timers and no 16-bit timer, but the Servo-library relies on having a 16-bit timer available. ...
By: sunilksree

Continue Reading »]]>
Tue, 22 Jul 2014 14:40:52 PDT
3D Printed Wireless Tank http://www.instructables.com/id/3D-Printed-Wireless-LazerTag-Tank/
3D Printed Wireless Tank - More DIY How To Projects]]> http://cdn.instructables.com/F6O/7JVW/HXLMIE5V/F6O7JVWHXLMIE5V.SQUARE2.jpg http://cdn.instructables.com/F6O/7JVW/HXLMIE5V/F6O7JVWHXLMIE5V.SQUARE.jpg http://cdn.instructables.com/F6O/7JVW/HXLMIE5V/F6O7JVWHXLMIE5V.SMALL.jpg 2bigbros In this Instructable I will show you how to make a wireless tank that you will be able to play with someone else or just use it a base to create bigger and better tank. This tank uses Bluetooth modules connected to Tera Term to send commands to the Arduino. I used IR Leds that are used in Lazer tag ...
By: 2bigbros

Continue Reading »]]>
Mon, 14 Jul 2014 21:59:28 PDT
Arduino Controlled Lighthouse http://www.instructables.com/id/Arduino-Controlled-Lighthouse/
Arduino Controlled Lighthouse - More DIY How To Projects]]> http://cdn.instructables.com/FEN/5VE2/HX0DPYVN/FEN5VE2HX0DPYVN.SQUARE2.jpg http://cdn.instructables.com/FEN/5VE2/HX0DPYVN/FEN5VE2HX0DPYVN.SQUARE.jpg http://cdn.instructables.com/FEN/5VE2/HX0DPYVN/FEN5VE2HX0DPYVN.SMALL.jpg joesinstructables Overview:I’ve often thought that a lighthouse would make a great project for an Arduino, and so I decided to give it a try using one of the local lighthouses here in Erie, Pennsylvania as inspiration. I chose the North Pierhead Lighthouse that guards the entrance to Presque Isle Bay. The model fea...
By: joesinstructables

Continue Reading »]]>
Mon, 30 Jun 2014 06:13:10 PDT
Arduino playing game don't step on the white block" http://www.instructables.com/id/Arduino-playing-game-Dontt-step-on-the-white-block/
Arduino playing game don't step on the white block" - More DIY How To Projects]]> http://cdn.instructables.com/FTK/LV8U/HWZ9V61A/FTKLV8UHWZ9V61A.SQUARE2.jpg http://cdn.instructables.com/FTK/LV8U/HWZ9V61A/FTKLV8UHWZ9V61A.SQUARE.jpg http://cdn.instructables.com/FTK/LV8U/HWZ9V61A/FTKLV8UHWZ9V61A.SMALL.jpg ivver Hi everyone! In this tutorial I'll show you my quick-made robot which can play game on phone. I was doing this for school just for demonstration, this project still needs upgrades in program and hardware, it has some glitches, on example, the program do not recognize when two boxes come in a row, I ...
By: ivver

Continue Reading »]]>
Sun, 29 Jun 2014 16:35:35 PDT
Drawing Machine with Arduino http://www.instructables.com/id/Drawing-Machine-with-Arduino/
Drawing Machine with Arduino - More DIY How To Projects]]> http://cdn.instructables.com/F0R/E5DZ/HW4OGMIT/F0RE5DZHW4OGMIT.SQUARE2.jpg http://cdn.instructables.com/F0R/E5DZ/HW4OGMIT/F0RE5DZHW4OGMIT.SQUARE.jpg http://cdn.instructables.com/F0R/E5DZ/HW4OGMIT/F0RE5DZHW4OGMIT.SMALL.jpg bodet328 My first use of the Arduino in a project. A school assignment to make a drawing machine. This was 2 week project, so please excuse the wires as I didn't have time to solder anything.I enjoy touchless-interfaces. I used a photocell and by controlling the amount of light that received, I was able to c...
By: bodet328

Continue Reading »]]>
Sat, 7 Jun 2014 11:28:53 PDT
Arduino controlled Rotary Stewart Platform http://www.instructables.com/id/Arduino-controlled-Rotary-Stewart-Platform/
Arduino controlled Rotary Stewart Platform - More DIY How To Projects]]> http://cdn.instructables.com/FLP/W3OV/HW1M9CMH/FLPW3OVHW1M9CMH.SQUARE2.jpg http://cdn.instructables.com/FLP/W3OV/HW1M9CMH/FLPW3OVHW1M9CMH.SQUARE.jpg http://cdn.instructables.com/FLP/W3OV/HW1M9CMH/FLPW3OVHW1M9CMH.SMALL.jpg ThomasKNR This instructable is about building a Rotary Stewart Platform. It allows to position its moving platform in six degrees of freedom. This specific platform is designed to be able to position a DSLR or any other digital camera.This version of Stewart Platform uses instead of linear actuators just ordi...
By: ThomasKNR

Continue Reading »]]>
Thu, 5 Jun 2014 05:25:48 PDT
Motion Following Robot http://www.instructables.com/id/Motion-Following-Robot/
Motion Following Robot - More DIY How To Projects]]> http://cdn.instructables.com/FS1/XP2Z/HVXC31HY/FS1XP2ZHVXC31HY.SQUARE2.jpg http://cdn.instructables.com/FS1/XP2Z/HVXC31HY/FS1XP2ZHVXC31HY.SQUARE.jpg http://cdn.instructables.com/FS1/XP2Z/HVXC31HY/FS1XP2ZHVXC31HY.SMALL.jpg MagicByCalvin Hello instructables community! After messing around with an Arduino for a couple months and avidly reading instructables, I decided that I would finally publish my own. I wanted to create something that moves by itself. I also wanted to create a system that reacts to the outside environment. After s...
By: MagicByCalvin

Continue Reading »]]>
Tue, 3 Jun 2014 10:47:31 PDT
Tracking Cat Eyes via Kinect http://www.instructables.com/id/Tracking-Cat-Eyes-via-Kinect/
Tracking Cat Eyes via Kinect - More DIY How To Projects]]> http://cdn.instructables.com/FJA/MUQQ/HV9HT5HB/FJAMUQQHV9HT5HB.SQUARE2.jpg http://cdn.instructables.com/FJA/MUQQ/HV9HT5HB/FJAMUQQHV9HT5HB.SQUARE.jpg http://cdn.instructables.com/FJA/MUQQ/HV9HT5HB/FJAMUQQHV9HT5HB.SMALL.jpg jgbradley1 This instructable was made as part of the CS graduate course "Tangible Interactive Computing" at the University of Maryland, College Park taught by Professor Jon Froehlich. The course focused on exploring the materiality of interactive computing and, in the words of MIT Professor Hiroshii Ishii, sou...
By: jgbradley1

Continue Reading »]]>
Sat, 17 May 2014 16:04:38 PDT
Brushless Gimbal with Arduino http://www.instructables.com/id/Brushless-Gimbal-with-Arduino/
Brushless Gimbal with Arduino - More DIY How To Projects]]> http://cdn.instructables.com/F56/7S0G/HUYLS94C/F567S0GHUYLS94C.SQUARE2.jpg http://cdn.instructables.com/F56/7S0G/HUYLS94C/F567S0GHUYLS94C.SQUARE.jpg http://cdn.instructables.com/F56/7S0G/HUYLS94C/F567S0GHUYLS94C.SMALL.jpg Jonah Grubb This is a Spring 2014 Electronics project at Pomona College created by Andreas Biekert and Jonah Grubb. Thanks to Professor Dwight Whitaker, Tony Grigsby and the Pomona Physics Department. Our goal with this project was to create a 2 axis brushless gimbal controlled solely by an Arduino Uno with inp...
By: Jonah Grubb

Continue Reading »]]>
Thu, 8 May 2014 20:52:25 PDT
Android accelero control arduino servo via bluetooth (app inventor) http://www.instructables.com/id/Android-accelero-control-arduino-servo-via-bluetoo/
Android accelero control arduino servo via bluetooth (app inventor) - More DIY How To Projects]]> http://cdn.instructables.com/FKB/WUBB/HUURJ4U0/FKBWUBBHUURJ4U0.SQUARE2.jpg http://cdn.instructables.com/FKB/WUBB/HUURJ4U0/FKBWUBBHUURJ4U0.SQUARE.jpg http://cdn.instructables.com/FKB/WUBB/HUURJ4U0/FKBWUBBHUURJ4U0.SMALL.jpg planetleak This short video tutorial show the easy way to control your servo with the android phone accelerometer.App created with App Inventor 2. Sorry for the last part of the video, my webcam slowed little.
By: planetleak

Continue Reading »]]>
Mon, 5 May 2014 23:52:19 PDT
Robo-Mobile - A Homemade Bluetooth Robot http://www.instructables.com/id/Robo-Mobile-A-Homemade-Bluetooth-Robot/
Robo-Mobile - A Homemade Bluetooth Robot - More DIY How To Projects]]> http://cdn.instructables.com/FIW/NTPA/HUU1GL68/FIWNTPAHUU1GL68.SQUARE2.jpg http://cdn.instructables.com/FIW/NTPA/HUU1GL68/FIWNTPAHUU1GL68.SQUARE.jpg http://cdn.instructables.com/FIW/NTPA/HUU1GL68/FIWNTPAHUU1GL68.SMALL.jpg Razer0901 Background This robot is one I built to learn. Before this project I did get my feet wet with a few small scale Arduino projects like an ultrasonic robot, (that would move backwards until it was a certain distance away from the wall,) and I did get to play with a few of the shields designed for t...
By: Razer0901

Continue Reading »]]>
Mon, 5 May 2014 15:47:42 PDT
Arduino Finger (Remote Yourself) http://www.instructables.com/id/Adruino-Finger-Remote-Yourself/ http://cdn.instructables.com/FF4/UH5T/HUMRV2GG/FF4UH5THUMRV2GG.SQUARE2.jpg http://cdn.instructables.com/FF4/UH5T/HUMRV2GG/FF4UH5THUMRV2GG.SQUARE.jpg http://cdn.instructables.com/FF4/UH5T/HUMRV2GG/FF4UH5THUMRV2GG.SMALL.jpg mydnc Arduino Finger Parts: - 1x Servo (for 1 finger, I used 9g Micro servo) - 1x 50k Potentiometer ( for finger knuckle) - 1x Arduino Mega or Uno (i used Mega) - 1x Sensor shield (optional) - 3x Wire (Red, Yellow, Black) - 1x Gripper (for not having a claw did it myself from junk) - 1x Exofinger...
By: mydnc

Continue Reading »]]>
Wed, 30 Apr 2014 09:20:15 PDT
Arduino Thermostat (Mechanical) http://www.instructables.com/id/Arduino-Thermostat-Mechanical/
Arduino Thermostat (Mechanical) - More DIY How To Projects]]> http://cdn.instructables.com/F9N/1R2C/HU8P0LSA/F9N1R2CHU8P0LSA.SQUARE2.jpg http://cdn.instructables.com/F9N/1R2C/HU8P0LSA/F9N1R2CHU8P0LSA.SQUARE.jpg http://cdn.instructables.com/F9N/1R2C/HU8P0LSA/F9N1R2CHU8P0LSA.SMALL.jpg Mizchief100 I am currently living in a college dorm. Like most dorms it's about the size of a tissue box but less comforting. Fortunately, my room has a heater/AC with four positions: low, medium, high, and off. Unfortunately in winter an hour on the low setting makes the room a stifling 80 degrees and when t...
By: Mizchief100

Continue Reading »]]>
Thu, 24 Apr 2014 08:08:46 PDT
Javascript robotics and browser-based Arduino control http://www.instructables.com/id/Javascript-robotics-and-browser-based-Arduino-cont/
Javascript robotics and browser-based Arduino control - More DIY How To Projects]]> http://cdn.instructables.com/FA6/XPBP/HU54MI2D/FA6XPBPHU54MI2D.SQUARE2.jpg http://cdn.instructables.com/FA6/XPBP/HU54MI2D/FA6XPBPHU54MI2D.SQUARE.jpg http://cdn.instructables.com/FA6/XPBP/HU54MI2D/FA6XPBPHU54MI2D.SMALL.jpg danasf Use your JavaScript and web development knowledge to control Arduino projects and even robots (node + robots = nodebots)! This is made easy with node.js, Firmata and Johnny-Five. Let's get started! Johnny-Five logo by Mike Sgier. Arduino photo CC-BY Raeky. Install node.js Node.js is a javascri...
By: danasf

Continue Reading »]]>
Fri, 18 Apr 2014 12:44:57 PDT
Sweeping Ultrasonic Rangefinder http://www.instructables.com/id/Sweeping-Ultrasonic-Rangefinder/
Sweeping Ultrasonic Rangefinder - More DIY How To Projects]]> http://cdn.instructables.com/FB5/0KFK/HS8FTY0R/FB50KFKHS8FTY0R.SQUARE2.jpg http://cdn.instructables.com/FB5/0KFK/HS8FTY0R/FB50KFKHS8FTY0R.SQUARE.jpg http://cdn.instructables.com/FB5/0KFK/HS8FTY0R/FB50KFKHS8FTY0R.SMALL.jpg ScitechWA This Instructable shows you how to use an Arduino Uno, ultrasonic rangefinder, servo and TFT display to make a handheld sweeping ultrasonic rangefinder. As the servo sweeps a 180 degree arc, the Uno processes data from the rangefinder, plotting obstacles on the display in real time. To build th...
By: ScitechWA

Continue Reading »]]>
Mon, 24 Mar 2014 17:53:12 PDT
Internet Controlled Car http://www.instructables.com/id/Internet-Controlled-Car/
Internet Controlled Car - More DIY How To Projects]]> http://cdn.instructables.com/F8K/H577/HSM544PI/F8KH577HSM544PI.SQUARE2.jpg http://cdn.instructables.com/F8K/H577/HSM544PI/F8KH577HSM544PI.SQUARE.jpg http://cdn.instructables.com/F8K/H577/HSM544PI/F8KH577HSM544PI.SMALL.jpg kitani1 Internet controlled Destroyer is essential in all civil and military cars.  Military can use this technology to decrease the loose of soldiers by sending machines to fight while they are safe in the control room. Controlling over internet opens a whole new window for everything not just only cars y...
By: kitani1

Continue Reading »]]>
Wed, 12 Mar 2014 00:11:49 PDT
Arduino & Servo Motor to your Music box http://www.instructables.com/id/Arduino-Servo-Motor-to-your-Music-box/ http://cdn.instructables.com/FGH/3FUQ/HS80F3E3/FGH3FUQHS80F3E3.SQUARE2.jpg http://cdn.instructables.com/FGH/3FUQ/HS80F3E3/FGH3FUQHS80F3E3.SQUARE.jpg http://cdn.instructables.com/FGH/3FUQ/HS80F3E3/FGH3FUQHS80F3E3.SMALL.jpg ALP Electronic Innovation Download our free Arduino project code here. Things needed: 1. Arduino 2. Servo Motor 3. Toggle switch 4. Resistor (10K) Instructions: 1. Install your Servo motor (9g) or above at the side of your box. 2. Connect all the wirings. 3. Upload the Arduino code. You may also want ...
By: ALP Electronic Innovation

Continue Reading »]]>
Fri, 28 Feb 2014 18:53:42 PST
Arduino wireless laser turret http://www.instructables.com/id/Arduino-wireless-laser-turret/
Arduino wireless laser turret - More DIY How To Projects]]> http://cdn.instructables.com/FA6/FSNF/HS18ENSS/FA6FSNFHS18ENSS.SQUARE2.jpg http://cdn.instructables.com/FA6/FSNF/HS18ENSS/FA6FSNFHS18ENSS.SQUARE.jpg http://cdn.instructables.com/FA6/FSNF/HS18ENSS/FA6FSNFHS18ENSS.SMALL.jpg Eagle199393 Very easy to build arduino wireless laser turret, also very cheap components you can buy on ebay for example. To make this project I used 2.4GHz RF transceiver modules that is built in the nRF24L01+ IC. nRF24L01+ are extremely cheap and cost a few dollars for one piece. List of componen...
By: Eagle199393

Continue Reading »]]>
Tue, 25 Feb 2014 13:04:01 PST
Forget Me Not- Remote Flower Watering http://www.instructables.com/id/Forget-Me-Not-Remote-Flower-Watering/
Forget Me Not- Remote Flower Watering - More DIY How To Projects]]> http://cdn.instructables.com/FJA/1UBP/HS1RRDQN/FJA1UBPHS1RRDQN.SQUARE2.jpg http://cdn.instructables.com/FJA/1UBP/HS1RRDQN/FJA1UBPHS1RRDQN.SQUARE.jpg http://cdn.instructables.com/FJA/1UBP/HS1RRDQN/FJA1UBPHS1RRDQN.SMALL.jpg Snax_and_Macs Hi everyone, Lucy Matchett, Nicole Yi Messier, and Joselyn McDonald (Snax_and_Macs) made a remote flower-watering device so you can water your loved ones' plants when you water your own. We used Arduinos, a photoresistor, a servo, Arduino and Processing sketches, Spacebrew, and a little elbow gr...
By: Snax_and_Macs

Continue Reading »]]>
Mon, 24 Feb 2014 17:00:25 PST
OpenSquare - Write big with a RC car http://www.instructables.com/id/OpenSquare-Write-big-with-a-RC-car/
OpenSquare - Write big with a RC car - More DIY How To Projects]]> http://cdn.instructables.com/F0L/AZHT/HRWNEX7O/F0LAZHTHRWNEX7O.SQUARE2.jpg http://cdn.instructables.com/F0L/AZHT/HRWNEX7O/F0LAZHTHRWNEX7O.SQUARE.jpg http://cdn.instructables.com/F0L/AZHT/HRWNEX7O/F0LAZHTHRWNEX7O.SMALL.jpg PierreP Hi there, You're going to transform any RC toy car into a big message writer that can be used to transform your city squares into witty messages, political statements or beautiful drawings, and for less than 20$. The idea is to drop a trail of powder or paint behind the car to write the message....
By: PierreP

Continue Reading »]]>
Sat, 22 Feb 2014 08:00:54 PST
Arduino Cyclone Game http://www.instructables.com/id/Arduino-Cyclone-Game/
Arduino Cyclone Game - More DIY How To Projects]]> http://cdn.instructables.com/FUZ/TYRF/HRTKIJ39/FUZTYRFHRTKIJ39.SQUARE2.jpg http://cdn.instructables.com/FUZ/TYRF/HRTKIJ39/FUZTYRFHRTKIJ39.SQUARE.jpg http://cdn.instructables.com/FUZ/TYRF/HRTKIJ39/FUZTYRFHRTKIJ39.SMALL.jpg bruhman This is a great project for the beginner(in fact it was my first!) I have no background in electronics knowledge, but found that this project was great for touching on digital outputs, analog outputs, push button inputs, and the value of resistors(due to a few surprising pops). I do luckily have a y...
By: bruhman

Continue Reading »]]>
Tue, 18 Feb 2014 20:21:54 PST
123D- Beginners first PCB for arduino SERVO/SENOR BOARD http://www.instructables.com/id/123D-DIY-Arduino-Sensor-board-PCB/
123D- Beginners first PCB for arduino SERVO/SENOR BOARD - More DIY How To Projects]]> http://cdn.instructables.com/FZM/OH1R/HRI8V8OZ/FZMOH1RHRI8V8OZ.SQUARE2.jpg http://cdn.instructables.com/FZM/OH1R/HRI8V8OZ/FZMOH1RHRI8V8OZ.SQUARE.jpg http://cdn.instructables.com/FZM/OH1R/HRI8V8OZ/FZMOH1RHRI8V8OZ.SMALL.jpg treyes4 Today I will be using 123D circuits for the first time and as a developing program I tried it for myself and here is a simple project wherein you can practice your pcb designing skills in a different environment. After guiding you through the ibles I will also teach you guys how to make the PCB bu...
By: treyes4

Continue Reading »]]>
Thu, 13 Feb 2014 06:08:21 PST
Arduino bot Android remote control II http://www.instructables.com/id/Arduino-bot-Android-remote-control-II/
Arduino bot Android remote control II - More DIY How To Projects]]> http://cdn.instructables.com/FH1/59UD/HR0ARYDW/FH159UDHR0ARYDW.SQUARE2.jpg http://cdn.instructables.com/FH1/59UD/HR0ARYDW/FH159UDHR0ARYDW.SQUARE.jpg http://cdn.instructables.com/FH1/59UD/HR0ARYDW/FH159UDHR0ARYDW.SMALL.jpg braserito66 When I bought my Complubot one year ago, I didn't thought how fun I could be, I've practice with follow line vehicle, brush car, but when I read I read the article on instructables related to bluethooth rc, I began to think it would be fun to mix, android and arduino programs. First I thought to ord...
By: braserito66

Continue Reading »]]>
Thu, 30 Jan 2014 13:28:01 PST
Robots With A Beat http://www.instructables.com/id/Lets-Dance/
Robots With A Beat - More DIY How To Projects]]> http://cdn.instructables.com/F9K/9U5H/HQVLBA0W/F9K9U5HHQVLBA0W.SQUARE2.jpg http://cdn.instructables.com/F9K/9U5H/HQVLBA0W/F9K9U5HHQVLBA0W.SQUARE.jpg http://cdn.instructables.com/F9K/9U5H/HQVLBA0W/F9K9U5HHQVLBA0W.SMALL.jpg rohanmenon I watched a Ted Talk on robots with a sense of feeling. Guy Hoffman shows his newest product, a robot that would "feel the beat of the music" from a docked iPod.I decided that I would make my own. I made a rudimentary version of his robot with a simple little toy horse doll. Get the materials You...
By: rohanmenon

Continue Reading »]]>
Sun, 26 Jan 2014 16:09:05 PST