Instructables: exploring - technology - arduino - shield http://www.instructables.com Sun, 1 May 2016 23:11:35 PDT BLOX v1.01 How to read temperature data on your website? http://www.instructables.com/id/How-to-Read-Temperature-Data-on-Your-Website/
How to read temperature data on your website? - More DIY How To Projects]]> http://cdn.instructables.com/FFM/TBNT/INM167KE/FFMTBNTINM167KE.SQUARE2.jpg http://cdn.instructables.com/FFM/TBNT/INM167KE/FFMTBNTINM167KE.SQUARE.jpg http://cdn.instructables.com/FFM/TBNT/INM167KE/FFMTBNTINM167KE.SMALL.jpg Bay Yolal Today, I am going to show you how to read temperature data from DHT11 humidity and temperature sensor is attached to Arduino UNO which uses ethernet shield to send temperature data to your personal website! This sounds perfect! Let me measure my room's status to put this information directly to my p...
By: Bay Yolal

Continue Reading »]]>
Fri, 29 Apr 2016 12:54:09 PDT
arduino servo r3 servo shield http://www.instructables.com/id/Arduino-Servo-R3-Servo-Shield/
arduino servo r3 servo shield - More DIY How To Projects]]> http://cdn.instructables.com/FIV/PVU9/INI7SNKR/FIVPVU9INI7SNKR.SQUARE2.jpg http://cdn.instructables.com/FIV/PVU9/INI7SNKR/FIVPVU9INI7SNKR.SQUARE.jpg http://cdn.instructables.com/FIV/PVU9/INI7SNKR/FIVPVU9INI7SNKR.SMALL.jpg Thijsluiten I designed this shield to control mutiple servos.I added 2 jumpers to select external power for heavy servos or 5 V from the arduino.I appoligise for the bad english it isn't my native language. The schematics In this instructable i added al files from my design you guys are free to alter and use...
By: Thijsluiten

Continue Reading »]]>
Wed, 27 Apr 2016 05:50:00 PDT
How to Modify RC CAR Via 2.4 GHz NRF24L01 Arduino Part2 Reciever(Rx) http://www.instructables.com/id/How-to-Modify-RC-CAR-Via-24-GHz-NRF24L01-Arduino-P-1/
How to Modify RC CAR Via 2.4 GHz NRF24L01 Arduino Part2 Reciever(Rx) - More DIY How To Projects]]> http://cdn.instructables.com/FX5/Z4II/IN35TX2V/FX5Z4IIIN35TX2V.SQUARE2.jpg http://cdn.instructables.com/FX5/Z4II/IN35TX2V/FX5Z4IIIN35TX2V.SQUARE.jpg http://cdn.instructables.com/FX5/Z4II/IN35TX2V/FX5Z4IIIN35TX2V.SMALL.jpg nipon4666 This is the continued instruction of "How to Modify RC CAR Via 2.4 GHz NRF24L01 Arduino Part1 Transmitter(Tx)"The instruction will advice how to build 2.4 GHz system receiver that basically use in rc car today.Thank to arduino-info.wikispaces.com , github.com/maniacbug/RF24 for RF24 library and othe...
By: nipon4666

Continue Reading »]]>
Sun, 24 Apr 2016 02:21:22 PDT
How to modify RC CAR via 2.4 GHz nRF24L01 Arduino Part1 Transmitter(Tx) http://www.instructables.com/id/How-to-Modify-RC-CAR-Via-24-GHz-NRF24L01-Arduino-P/
How to modify RC CAR via 2.4 GHz nRF24L01 Arduino Part1 Transmitter(Tx) - More DIY How To Projects]]> http://cdn.instructables.com/FSJ/XL1O/IN4QDGJ5/FSJXL1OIN4QDGJ5.SQUARE2.jpg http://cdn.instructables.com/FSJ/XL1O/IN4QDGJ5/FSJXL1OIN4QDGJ5.SQUARE.jpg http://cdn.instructables.com/FSJ/XL1O/IN4QDGJ5/FSJXL1OIN4QDGJ5.SMALL.jpg nipon4666 This instruction will introduce you how to modify cheap rc car by using 2.4 GHz nRF24L01 module with Arduino controller UNO. Ordinary rc car toy use AM/FM 20-50 MHz radio control which have only 5-10 m. remote range and noisy control around blind area.The instruction will advice how to modify transm...
By: nipon4666

Continue Reading »]]>
Sun, 17 Apr 2016 11:53:35 PDT
170 Tie Points Prototyping http://www.instructables.com/id/170-Tie-Points-Prototyping/
170 Tie Points Prototyping - More DIY How To Projects]]> http://cdn.instructables.com/F3H/BM92/IMMBCAQ5/F3HBM92IMMBCAQ5.SQUARE2.jpg http://cdn.instructables.com/F3H/BM92/IMMBCAQ5/F3HBM92IMMBCAQ5.SQUARE.jpg http://cdn.instructables.com/F3H/BM92/IMMBCAQ5/F3HBM92IMMBCAQ5.SMALL.jpg TrewRoad IntroductionThe open-source hardware realm of Arduino shields is a nearly dazzling array of variations of form and capability. There are choices of the bare PCB, DIY Kit or pre-assembled modules that combine with layout and functionality to a point of being products different from the original conce...
By: TrewRoad

Continue Reading »]]>
Mon, 4 Apr 2016 23:17:43 PDT
Soldadura del Kilomux MIDI shield para Arduino http://www.instructables.com/id/Soldadura-Del-Kilomux-MIDI-Shield-Para-Arduino/
Soldadura del Kilomux MIDI shield para Arduino - More DIY How To Projects]]> http://cdn.instructables.com/F95/J3L3/IM3OD9NZ/F95J3L3IM3OD9NZ.SQUARE2.jpg http://cdn.instructables.com/F95/J3L3/IM3OD9NZ/F95J3L3IM3OD9NZ.SQUARE.jpg http://cdn.instructables.com/F95/J3L3/IM3OD9NZ/F95J3L3IM3OD9NZ.SMALL.jpg Yaeltex El Kilomux es un shield para Arduino creado por Yaeltex para facilitar y potenciar la creación de controladores MIDI.Fue diseñado y fabricado para facilitar la creación de herramientas MIDI totalmente personalizadas a artistas visuales, músicos, productores que quieran incusionar en el diseño de int...
By: Yaeltex

Continue Reading »]]>
Tue, 22 Mar 2016 16:37:54 PDT
Attiny 85 Programming Shield http://www.instructables.com/id/Attiny-85-Programming-Shield/
Attiny 85 Programming Shield - More DIY How To Projects]]> http://cdn.instructables.com/FTF/XID4/IM3QG5S4/FTFXID4IM3QG5S4.SQUARE2.jpg http://cdn.instructables.com/FTF/XID4/IM3QG5S4/FTFXID4IM3QG5S4.SQUARE.jpg http://cdn.instructables.com/FTF/XID4/IM3QG5S4/FTFXID4IM3QG5S4.SMALL.jpg Rico Q Attiny 85, my favorite of all the Attinys. They are great because they are inexpensive, super small and still get the job done without having to use a whole Arduino. However I do not like coding them using a bread board. It can take for ever if your a beginner, it may look sloppy and sometimes if th...
By: Rico Q

Continue Reading »]]>
Tue, 22 Mar 2016 15:35:33 PDT
The first usage of Intel Edison http://www.instructables.com/id/The-First-Usage-of-Intel-Edison/
The first usage of Intel Edison - More DIY How To Projects]]> http://cdn.instructables.com/FBY/9SJ9/ILJWQUE5/FBY9SJ9ILJWQUE5.SQUARE2.jpg http://cdn.instructables.com/FBY/9SJ9/ILJWQUE5/FBY9SJ9ILJWQUE5.SQUARE.jpg http://cdn.instructables.com/FBY/9SJ9/ILJWQUE5/FBY9SJ9ILJWQUE5.SMALL.jpg Bay Yolal Today, I am going to show you how to use Intel Edison for the first time! Raspberry Pi and Arduino boards are still so popular in today's world, Intel Edison and its development board are also very interesting. I found a chance to examine what is really Intel Edison board is, and how could it used f...
By: Bay Yolal

Continue Reading »]]>
Sat, 12 Mar 2016 15:16:14 PST
How to Use Your MotorShield With DC Motors http://www.instructables.com/id/How-to-Use-Your-MotorShield-With-DC-Motors/
How to Use Your MotorShield With DC Motors - More DIY How To Projects]]> http://cdn.instructables.com/FME/OKHB/ILID1HB7/FMEOKHBILID1HB7.SQUARE2.jpg http://cdn.instructables.com/FME/OKHB/ILID1HB7/FMEOKHBILID1HB7.SQUARE.jpg http://cdn.instructables.com/FME/OKHB/ILID1HB7/FMEOKHBILID1HB7.SMALL.jpg JosephL76 I wanted to help with giving the community a simpler to understand guide to using DC Motors with the Motorshield which can be attached to your Arduino.So please grab your Arduino and MotorShield and I hope we can shed some light in how to properly prepare you in using your DC motors. The items yo...
By: JosephL76

Continue Reading »]]>
Mon, 7 Mar 2016 15:46:44 PST
PS3 controlled Robotic Arm http://www.instructables.com/id/PS3-Controlled-Robotic-Arm/
PS3 controlled Robotic Arm - More DIY How To Projects]]> http://cdn.instructables.com/FW9/SQY5/ILCHF7WX/FW9SQY5ILCHF7WX.SQUARE2.jpg http://cdn.instructables.com/FW9/SQY5/ILCHF7WX/FW9SQY5ILCHF7WX.SQUARE.jpg http://cdn.instructables.com/FW9/SQY5/ILCHF7WX/FW9SQY5ILCHF7WX.SMALL.jpg Chaitanya Sanghadia This arm can be controlled over bluetooth Parts 1. Robotic Arm2. Robo geek Sensor shield3. Relay Board4. Arduino AT Mega5. 3v Battery Pack6. Double Female Ended wires7. Pwm wire extenders 8. USB Host Shield9. USB Dongle Stack the Shields Stack the USB host and the robogeek shield on the Mega. ...
By: Chaitanya Sanghadia

Continue Reading »]]>
Sat, 5 Mar 2016 10:11:27 PST
Arduino Controlled Animatronic Skeleton Rock Band - in progress http://www.instructables.com/id/Animatronic-Skeleton-Rock-Band-in-Progress/
Arduino Controlled Animatronic Skeleton Rock Band - in progress - More DIY How To Projects]]> http://cdn.instructables.com/FPU/7EPX/ILE0MOWS/FPU7EPXILE0MOWS.SQUARE2.jpg http://cdn.instructables.com/FPU/7EPX/ILE0MOWS/FPU7EPXILE0MOWS.SQUARE.jpg http://cdn.instructables.com/FPU/7EPX/ILE0MOWS/FPU7EPXILE0MOWS.SMALL.jpg hauntedworkshop For Halloween this year, I decided to build an animatronic skeleton rock band. It's a work in progress at this point, but I'm pretty happy with how it's coming along. Most everything is made from materials I had on hand (I'm a bit of a hoarder) and old static props that I modified for my purposes. T...
By: hauntedworkshop

Continue Reading »]]>
Fri, 4 Mar 2016 18:57:26 PST
PS3 controlled Nomad 4 wheel drive truck http://www.instructables.com/id/PS3-Controlled-Nomad-4-Wheel-Drive-Truck/
PS3 controlled Nomad 4 wheel drive truck - More DIY How To Projects]]> http://cdn.instructables.com/F49/YPTQ/IL5J0IG6/F49YPTQIL5J0IG6.SQUARE2.jpg http://cdn.instructables.com/F49/YPTQ/IL5J0IG6/F49YPTQIL5J0IG6.SQUARE.jpg http://cdn.instructables.com/F49/YPTQ/IL5J0IG6/F49YPTQIL5J0IG6.SMALL.jpg Chaitanya Sanghadia PS3 Controlled Truck Build Nomad 4 wheel drive truck https://www.servocity.com/html/nomad_4wd_off-road_chassis.html#.VsEDnfIrK00 Add an arduino UNO, USB host controller, and motor shield https://learn.adafruit.com/adafruit-motor-shield-v2-for-arduino/overview Connect the motors, and Bluetoot...
By: Chaitanya Sanghadia

Continue Reading »]]>
Sat, 27 Feb 2016 20:00:39 PST
Shield RFID NFC Lector PN5332 Chico http://www.instructables.com/id/Shield-RFID-NFC-Lector-PN5332-Chico/
Shield RFID NFC Lector PN5332 Chico - More DIY How To Projects]]> http://cdn.instructables.com/FCN/6RNC/IL5FV5FS/FCN6RNCIL5FV5FS.SQUARE2.jpg http://cdn.instructables.com/FCN/6RNC/IL5FV5FS/FCN6RNCIL5FV5FS.SQUARE.jpg http://cdn.instructables.com/FCN/6RNC/IL5FV5FS/FCN6RNCIL5FV5FS.SMALL.jpg HeTPro Shield RFID NFC lector PN532 es una tarjeta para leer módulos de RFID/NFC de frecuencias de 13.56Mhz. Esta tarjeta es compatible con Arduino o con algún otro microcontrolador. Puede trabajar por protocolo I2C, HSU o SPI. La antena viene ya incluida es el área blanca de la tarjeta.En este tutorial se...
By: HeTPro

Continue Reading »]]>
Thu, 25 Feb 2016 11:29:49 PST
BLE GestureController for Mac http://www.instructables.com/id/BLE-GestureController-for-Mac/
BLE GestureController for Mac - More DIY How To Projects]]> http://cdn.instructables.com/F6O/VKX1/IKLFR31Z/F6OVKX1IKLFR31Z.SQUARE2.jpg http://cdn.instructables.com/F6O/VKX1/IKLFR31Z/F6OVKX1IKLFR31Z.SQUARE.jpg http://cdn.instructables.com/F6O/VKX1/IKLFR31Z/F6OVKX1IKLFR31Z.SMALL.gif abue172 Hey everyone!This project shows a simple idea which using a gesture sensor to control your MAC.The concept is using the data sent by arduino through BLE, and using apple script to do some specific action on your MAC.So, lets get start! Material You will need Gesture Sensor (https://www.sparkfu...
By: abue172

Continue Reading »]]>
Sat, 13 Feb 2016 23:27:08 PST
Arduino Web Server http://www.instructables.com/id/Arduino-Web-Server-1/
Arduino Web Server - More DIY How To Projects]]> http://cdn.instructables.com/FU5/30DJ/IKBHVP7O/FU530DJIKBHVP7O.SQUARE2.jpg http://cdn.instructables.com/FU5/30DJ/IKBHVP7O/FU530DJIKBHVP7O.SQUARE.jpg http://cdn.instructables.com/FU5/30DJ/IKBHVP7O/FU530DJIKBHVP7O.SMALL.jpg Conor M This instructable will show you how to make an Arduino web server that you can turn an led on and off and rotate a servo motor with an internet connection.You will need:1x Arduino Uno1x Ethernet Shield1x Ethernet Cable1x 220 Ohm Resistor1x LED1x Micro Servo Motor1x Breadboard Jumper Cables The Sch...
By: Conor M

Continue Reading »]]>
Sun, 7 Feb 2016 08:13:08 PST
Arduino relay control over the internet http://www.instructables.com/id/Over-Internet-Arduino-Relay-Control/
Arduino relay control over the internet - More DIY How To Projects]]> http://cdn.instructables.com/F22/61Y9/IJSUWIBS/F2261Y9IJSUWIBS.SQUARE2.jpg http://cdn.instructables.com/F22/61Y9/IJSUWIBS/F2261Y9IJSUWIBS.SQUARE.jpg http://cdn.instructables.com/F22/61Y9/IJSUWIBS/F2261Y9IJSUWIBS.SMALL.jpg sameo Welcome! Make a sketch Use the sketch to connect the relay to the Arduino. The sketch will help you when you will be writing the code, so that you will know what pins you need to control with the code.I'm using an Arduino with the W5100 Ethernet Shield Network Expansion Board, to connect to my ho...
By: sameo

Continue Reading »]]>
Sun, 24 Jan 2016 15:53:35 PST
Simple Arduino LCD Game! http://www.instructables.com/id/Simple-Arduino-LCD-Game/
Simple Arduino LCD Game! - More DIY How To Projects]]> http://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SQUARE2.jpg http://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SQUARE.jpg http://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SMALL.jpg Pure Carbon Hello World! Pure Carbon here and today I will be showing you how to make an extremely simple game that can be played on an LCD Button Shield for Arduino. Unfortunately its not actually a game because all you will be able to do is make a character walk back and forth using the buttons on the shield ...
By: Pure Carbon

Continue Reading »]]>
Sat, 23 Jan 2016 21:46:52 PST
Control an arduino project through a customisable android / Iphone app with Blynk and Wemos D1: THE 2016 SUPER NOOB FRIENDLY WAY http://www.instructables.com/id/THE-2016-SUPER-NOOB-FRIENDLY-WAY-Control-an-Arduin/
Control an arduino project through a customisable android / Iphone app with Blynk and Wemos D1: THE 2016 SUPER NOOB FRIENDLY WAY - More DIY How To Projects]]> http://cdn.instructables.com/FJA/3RRA/IJIZ6ZXP/FJA3RRAIJIZ6ZXP.SQUARE2.jpg http://cdn.instructables.com/FJA/3RRA/IJIZ6ZXP/FJA3RRAIJIZ6ZXP.SQUARE.jpg http://cdn.instructables.com/FJA/3RRA/IJIZ6ZXP/FJA3RRAIJIZ6ZXP.SMALL.jpg Ruben Marc Speybrouck The aim of this instructable is to teach you how to create wifi connected arduino projects the simplest and fastest way possible. If you want to make an arduino project that you can control from your smartphone and that only costed 4 eurs in hardware, then this project is for you! Do not rely on old...
By: Ruben Marc Speybrouck

Continue Reading »]]>
Mon, 18 Jan 2016 09:17:47 PST
Arduino Paper Shield http://www.instructables.com/id/Arduino-Paper-Shield/
Arduino Paper Shield - More DIY How To Projects]]> http://cdn.instructables.com/FKR/744Q/IJACK8BL/FKR744QIJACK8BL.SQUARE2.jpg http://cdn.instructables.com/FKR/744Q/IJACK8BL/FKR744QIJACK8BL.SQUARE.jpg http://cdn.instructables.com/FKR/744Q/IJACK8BL/FKR744QIJACK8BL.SMALL.jpg DonX-Developer I like the Arduino. The UNO in particular. However, along with many others, I have difficulty easily seeing the pin names/numbers. Don’t get me started on reading values of transistors and ICs, as there is not much that I can do about that, other than get a handy magnifying glass. But, I can do some...
By: DonX-Developer

Continue Reading »]]>
Tue, 12 Jan 2016 07:44:49 PST
Simple POV Display with POV shield http://www.instructables.com/id/Simple-POV-Display-With-POV-Shield/
Simple POV Display with POV shield - More DIY How To Projects]]> http://cdn.instructables.com/FVY/42G3/IIYWVPPL/FVY42G3IIYWVPPL.SQUARE2.jpg http://cdn.instructables.com/FVY/42G3/IIYWVPPL/FVY42G3IIYWVPPL.SQUARE.jpg http://cdn.instructables.com/FVY/42G3/IIYWVPPL/FVY42G3IIYWVPPL.SMALL.jpg alt_sense POV displays are awesome creations using simply the LEDs and little of coding. POV displays using Arduino are one of the most easiest and fascinating things one can make. The POV shield is available in eBay... click here to buy one Things Needed:1) Rotating Stick (1)2) 1000 RPM motor (1)3) AltSense'...
By: alt_sense

Continue Reading »]]>
Mon, 4 Jan 2016 06:51:40 PST
Adding Bluetooth 4.0 to your Arduino Project [IoT] - Controlled by Smartphone http://www.instructables.com/id/Adding-Bluetooth-40-to-Your-Arduino-Project-IoT-Co/
Adding Bluetooth 4.0 to your Arduino Project [IoT] - Controlled by Smartphone - More DIY How To Projects]]> http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SQUARE2.jpg http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SQUARE.jpg http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SMALL.jpg IoTalabs We are group of internet of things enthusiasts that love hacking together different devices. Check out our current project at our website and take a look at this guide in a different format at our blog. Introduction Arduino is a cool platform because you can easily interact with your projects fro...
By: IoTalabs

Continue Reading »]]>
Fri, 25 Dec 2015 16:55:06 PST
Arduino Bluetooth Programming Shield (wireless Upload Code) http://www.instructables.com/id/Arduino-Bluetooth-Programming-Shield-wireless-Uplo/
Arduino Bluetooth Programming Shield (wireless Upload Code) - More DIY How To Projects]]> http://cdn.instructables.com/FNH/742O/IIJKX9K3/FNH742OIIJKX9K3.SQUARE2.jpg http://cdn.instructables.com/FNH/742O/IIJKX9K3/FNH742OIIJKX9K3.SQUARE.jpg http://cdn.instructables.com/FNH/742O/IIJKX9K3/FNH742OIIJKX9K3.SMALL.jpg uuemad This project will show you how to make a wireless upload Arduino code from your Computer via Bluetooth. Step #1: Breadboard the Bluetooth module setup circuit. •The Bluetooth module used in this project is the HC-05. It is inexpensive and one of the most common modules you'll see in a lot of oth...
By: uuemad

Continue Reading »]]>
Tue, 22 Dec 2015 08:19:30 PST
LinkIt ONE - LCD Shield http://www.instructables.com/id/LinkIt-ONE-LCD-Shield/
LinkIt ONE - LCD Shield - More DIY How To Projects]]> http://cdn.instructables.com/F9A/S8W8/IIEWNBC0/F9AS8W8IIEWNBC0.SQUARE2.jpg http://cdn.instructables.com/F9A/S8W8/IIEWNBC0/F9AS8W8IIEWNBC0.SQUARE.jpg http://cdn.instructables.com/F9A/S8W8/IIEWNBC0/F9AS8W8IIEWNBC0.SMALL.jpg ptkrf Hi!Today I will show you how to make an LCD shield for Mediatek's LinkIt ONE board. The process is not too hard and the cost is very little when compared to LCD shields you can buy at vendors like SparkFun electronics, Farnell and so on.Now let's get started! Materials and tools You will need wha...
By: ptkrf

Continue Reading »]]>
Sun, 20 Dec 2015 13:25:48 PST
How to use 2.4" TFT LCD Shield with Arduino Mega http://www.instructables.com/id/How-to-Use-24-TFT-LCD-Shield-With-Arduino-Mega/
How to use 2.4" TFT LCD Shield with Arduino Mega - More DIY How To Projects]]> http://cdn.instructables.com/F3W/MF21/II94PNXJ/F3WMF21II94PNXJ.SQUARE2.jpg http://cdn.instructables.com/F3W/MF21/II94PNXJ/F3WMF21II94PNXJ.SQUARE.jpg http://cdn.instructables.com/F3W/MF21/II94PNXJ/F3WMF21II94PNXJ.SMALL.jpg Bay Yolal Today, I am going to show you that we want to use 2.4" TFT LCD shield (There is mcufriend.com writes on this shield) works with Arduino Mega, because it is not so easy to run each other. But with this instructions, you can run and modify codes easily according to this tutorial. Assembly This step...
By: Bay Yolal

Continue Reading »]]>
Wed, 16 Dec 2015 11:09:21 PST
Tweeting Sensor Data With Arduino / RedBoard and SparkFun BME280 and SparkFun ESP8266 Shield http://www.instructables.com/id/Tweeting-Sensor-Data-With-Arduino-RedBoard-and-Spa/
Tweeting Sensor Data With Arduino / RedBoard and SparkFun BME280 and SparkFun ESP8266 Shield - More DIY How To Projects]]> http://cdn.instructables.com/F5Z/M096/II4YPI2Z/F5ZM096II4YPI2Z.SQUARE2.jpg http://cdn.instructables.com/F5Z/M096/II4YPI2Z/F5ZM096II4YPI2Z.SQUARE.jpg http://cdn.instructables.com/F5Z/M096/II4YPI2Z/F5ZM096II4YPI2Z.SMALL.jpg carsonchang Materials: SparkFun BME280 Atmospheric SensorSparkFun WiFi ShieldSparkFun RedBoardSoldering IronA Computer With a USB Port and Arduino SoftwareA Twitter AccountAn Internet Connection (WPA2 - Just to Be Safe)Approximately 15 MinutesMake sure to test your ESP8266 and BME280 using the example codes aft...
By: carsonchang

Continue Reading »]]>
Sun, 13 Dec 2015 20:01:19 PST
R2D2 Sounds on your Robot, Arduino http://www.instructables.com/id/R2D2-Sounds-on-Your-Robot-Arduino/
R2D2 Sounds on your Robot, Arduino - More DIY How To Projects]]> http://cdn.instructables.com/F6Y/7FKR/II3EZVVP/F6Y7FKRII3EZVVP.SQUARE2.jpg http://cdn.instructables.com/F6Y/7FKR/II3EZVVP/F6Y7FKRII3EZVVP.SQUARE.jpg http://cdn.instructables.com/F6Y/7FKR/II3EZVVP/F6Y7FKRII3EZVVP.SMALL.jpg arduinomaster I downloaded sounds from Youtube onto my Arduino compatible MP3 player and like to share this success with you.Any sound, music or sound tracks can be downloaded and played on your PC or on your MP3 player.I have used the shield shown in the picture to play it back using an Arduino and an elechouse ...
By: arduinomaster

Continue Reading »]]>
Sun, 13 Dec 2015 00:31:37 PST
Smart Control http://www.instructables.com/id/Smart-Control-1/
Smart Control - More DIY How To Projects]]> http://cdn.instructables.com/F82/VP1X/II0M88N0/F82VP1XII0M88N0.SQUARE2.jpg http://cdn.instructables.com/F82/VP1X/II0M88N0/F82VP1XII0M88N0.SQUARE.jpg http://cdn.instructables.com/F82/VP1X/II0M88N0/F82VP1XII0M88N0.SMALL.jpg Rochlitz Our project consists of a switch control over Bluetooth. Basically, we use an Arduino-compatible board with a shield (called Nanoshield) that can control a lamp. We also use a Bluetooth module to send and receive data wirelessly. We tested the system with a lamp, which we can turn on and off, but yo...
By: Rochlitz

Continue Reading »]]>
Thu, 10 Dec 2015 13:01:09 PST
Displaying data on a website - Electronic Pot [Arduino Nano + Ethernet Shield] http://www.instructables.com/id/Displaying-data-on-a-website-Electronic-Pot-Arduin/
Displaying data on a website - Electronic Pot [Arduino Nano + Ethernet Shield] - More DIY How To Projects]]> http://cdn.instructables.com/FNG/9QBB/IHNP7F20/FNG9QBBIHNP7F20.SQUARE2.jpg http://cdn.instructables.com/FNG/9QBB/IHNP7F20/FNG9QBBIHNP7F20.SQUARE.jpg http://cdn.instructables.com/FNG/9QBB/IHNP7F20/FNG9QBBIHNP7F20.SMALL.jpg janped I always wanted a plant in my room, that would fill the space between unfinished projects and expensive, but unnecessary pieces of electronic parts. So I came up with the idea of an electronic pot – The Arduino E-Pot – that would measure the basic needs of the plant (humidity, temperature and th...
By: janped

Continue Reading »]]>
Wed, 2 Dec 2015 06:32:22 PST
Easy BLE button http://www.instructables.com/id/Easy-BLE-button/
Easy BLE button - More DIY How To Projects]]> http://cdn.instructables.com/FPF/BJDW/IHHLAWGO/FPFBJDWIHHLAWGO.SQUARE2.jpg http://cdn.instructables.com/FPF/BJDW/IHHLAWGO/FPFBJDWIHHLAWGO.SQUARE.jpg http://cdn.instructables.com/FPF/BJDW/IHHLAWGO/FPFBJDWIHHLAWGO.SMALL.gif abue172 This instructable will show the steps to build a BLE button. What will you need Azufier (view my last post for more information) Simple Button Shield Mac iOS Device Making Button Shield Building Azufier's Shield is not so hard that you think.Buy a mini size ProtoBoard(like this one ), and...
By: abue172

Continue Reading »]]>
Fri, 27 Nov 2015 06:13:14 PST
Tutorial on the Atmel Xplained Mini http://www.instructables.com/id/Tutorial-on-the-Atmel-Xplained-Mini/
Tutorial on the Atmel Xplained Mini - More DIY How To Projects]]> http://cdn.instructables.com/FBB/8CHP/IHJGZ098/FBB8CHPIHJGZ098.SQUARE2.jpg http://cdn.instructables.com/FBB/8CHP/IHJGZ098/FBB8CHPIHJGZ098.SQUARE.jpg http://cdn.instructables.com/FBB/8CHP/IHJGZ098/FBB8CHPIHJGZ098.SMALL.jpg ForceTronics In this Instructable we give you an overview of the Atmel Xplained Mini which is a development board for the ATmega168PB microcontroller. In the video we cover how to load a simple "Blink" program onto the Xplained Mini with Atmel Studio and how the development board is compatible with Arduino Shiel...
By: ForceTronics

Continue Reading »]]>
Fri, 27 Nov 2015 05:34:52 PST
Arduino Basic Test Shield http://www.instructables.com/id/Arduino-Basic-Test-Shield/
Arduino Basic Test Shield - More DIY How To Projects]]> http://cdn.instructables.com/FPE/Y5XQ/IH3OXW7R/FPEY5XQIH3OXW7R.SQUARE2.jpg http://cdn.instructables.com/FPE/Y5XQ/IH3OXW7R/FPEY5XQIH3OXW7R.SQUARE.jpg http://cdn.instructables.com/FPE/Y5XQ/IH3OXW7R/FPEY5XQIH3OXW7R.SMALL.jpg PROTO-PIC-TECH We sell hundreds of Arduinos every month, and from time to time we get one returned as faulty. As technical support & product design for Proto-PIC.co.uk , I decided to make a shield for testing them. Thinking about how to do this, I thought about building 2 shields, one for input and one for output....
By: PROTO-PIC-TECH

Continue Reading »]]>
Wed, 18 Nov 2015 05:47:54 PST
EMF detector 0- 999 Hz for ATtiny 85 http://www.instructables.com/id/EMF-detector-0-999-Hz-for-ATtiny-85/
EMF detector 0- 999 Hz for ATtiny 85 - More DIY How To Projects]]> http://cdn.instructables.com/FF7/NRR0/IGZJ0IF1/FF7NRR0IGZJ0IF1.SQUARE2.jpg http://cdn.instructables.com/FF7/NRR0/IGZJ0IF1/FF7NRR0IGZJ0IF1.SQUARE.jpg http://cdn.instructables.com/FF7/NRR0/IGZJ0IF1/FF7NRR0IGZJ0IF1.SMALL.jpg arduinomaster An EMF meter can measure AC electromagnetic fields, which are usually emitted from manmade sources such as electrical wiring, while gaussmeters or magnetometers measure DC fields, which occur naturally in Earth's geomagnetic field and are emitted from other sources where direct current is present. ...
By: arduinomaster

Continue Reading »]]>
Sun, 15 Nov 2015 08:45:27 PST
3D Printed Back to the Future TIme Circuit Clock http://www.instructables.com/id/3D-Printed-Back-to-the-Future-TIme-Circuit-Clock/
3D Printed Back to the Future TIme Circuit Clock - More DIY How To Projects]]> http://cdn.instructables.com/FHJ/Y7IK/IGJP04VO/FHJY7IKIGJP04VO.SQUARE2.jpg http://cdn.instructables.com/FHJ/Y7IK/IGJP04VO/FHJY7IKIGJP04VO.SQUARE.jpg http://cdn.instructables.com/FHJ/Y7IK/IGJP04VO/FHJY7IKIGJP04VO.SMALL.jpg gg2inc The time circuit clock will display the following via the LED displays.Destination Time – (Top-Red)The destination time is an area that shows a fixed date and time. Use this area to display an important date in your life such as wedding, Birthday or the date you first discovered this most excellent...
By: gg2inc

Continue Reading »]]>
Wed, 4 Nov 2015 09:58:14 PST
ARDUINO PIR Motion Detector With 16X2 LCD http://www.instructables.com/id/ARDUINO-PIR-Motion-Detector-With-16X2-LCD/
ARDUINO PIR Motion Detector With 16X2 LCD - More DIY How To Projects]]> http://cdn.instructables.com/F2Y/LVEY/IG3YYZM6/F2YLVEYIG3YYZM6.SQUARE2.jpg http://cdn.instructables.com/F2Y/LVEY/IG3YYZM6/F2YLVEYIG3YYZM6.SQUARE.jpg http://cdn.instructables.com/F2Y/LVEY/IG3YYZM6/F2YLVEYIG3YYZM6.SMALL.jpg abhirooprobotics This is a simple project for beginners who have just started using Arduino.This project uses a PIR Motion Sensor and a 16X2 LCD Module to display when the motion was detected and when the motion stopped.So,just follow the steps to make this project. PARTS Required The parts required are:-1. 1 X A...
By: abhirooprobotics

Continue Reading »]]>
Sat, 24 Oct 2015 00:19:53 PDT
EASY BLUETOOTH SHIELD http://www.instructables.com/id/EASY-BLUETOOTH-SHIELD/
EASY BLUETOOTH SHIELD - More DIY How To Projects]]> http://cdn.instructables.com/FSI/Y0BI/IG2JIRYW/FSIY0BIIG2JIRYW.SQUARE2.jpg http://cdn.instructables.com/FSI/Y0BI/IG2JIRYW/FSIY0BIIG2JIRYW.SQUARE.jpg http://cdn.instructables.com/FSI/Y0BI/IG2JIRYW/FSIY0BIIG2JIRYW.SMALL.jpg Carl Gordon Media So, you want an easy way to connect your Arduino projects to your smartphone via Bluetooth?Maybe you want to build a shield and explore the possibilities of including Bluetooth in your future projects like me. I'm no expert in electronics but this was the easiest way I found to setup a Bluetooth con...
By: Carl Gordon Media

Continue Reading »]]>
Thu, 22 Oct 2015 15:28:23 PDT
Building an Arduino Shield for the nRF24L01+ Transceiver http://www.instructables.com/id/Building-an-Arduino-Shield-for-the-nRF24L01-Transc/
Building an Arduino Shield for the nRF24L01+ Transceiver - More DIY How To Projects]]> http://cdn.instructables.com/F73/1W9E/IG14244S/F731W9EIG14244S.SQUARE2.jpg http://cdn.instructables.com/F73/1W9E/IG14244S/F731W9EIG14244S.SQUARE.jpg http://cdn.instructables.com/F73/1W9E/IG14244S/F731W9EIG14244S.SMALL.jpg ForceTronics The nRF24L01+ Transceiver is a great low cost way to add wireless capability to any project. But the down side of the nRF24L01+ is it can be a hassle to prototype with. In this instructable we look at how to build an Arduino shield and a mini proto board for the nRF24L01+. You can also purchase the ...
By: ForceTronics

Continue Reading »]]>
Wed, 21 Oct 2015 13:31:07 PDT
Linkit One - Activity Controlled switching http://www.instructables.com/id/Linkit-One-Part-4-Activity-Controlled-switching/
Linkit One - Activity Controlled switching - More DIY How To Projects]]> http://cdn.instructables.com/FU9/DHQB/IFZQV2NW/FU9DHQBIFZQV2NW.SQUARE2.jpg http://cdn.instructables.com/FU9/DHQB/IFZQV2NW/FU9DHQBIFZQV2NW.SQUARE.jpg http://cdn.instructables.com/FU9/DHQB/IFZQV2NW/FU9DHQBIFZQV2NW.SMALL.jpg HUKBMBEAR The next step in usefully using strobing LEDs with the Linkit One board is to get it to respond to limits as the speed of the strobing changes.This guide will modify the code to allow the board to read the value of a potentiometer and light the on board led at pin D13, which can also be used to on o...
By: HUKBMBEAR

Continue Reading »]]>
Wed, 21 Oct 2015 10:52:40 PDT
Linkit One - Calibration and Detection http://www.instructables.com/id/Linkit-One-Part-3-Calibration-and-Detection/
Linkit One - Calibration and Detection - More DIY How To Projects]]> http://cdn.instructables.com/FXU/L24I/IFZQUPY1/FXUL24IIFZQUPY1.SQUARE2.jpg http://cdn.instructables.com/FXU/L24I/IFZQUPY1/FXUL24IIFZQUPY1.SQUARE.jpg http://cdn.instructables.com/FXU/L24I/IFZQUPY1/FXUL24IIFZQUPY1.SMALL.jpg HUKBMBEAR The next step in usefully using strobing LEDs with the Linkit One board is to get them to respond to a varying condition – for example light levels.This guide will add components to the previous guide (Linkit One - Part 2 - Strobe lights) I will also modify the code to allow the board to read the va...
By: HUKBMBEAR

Continue Reading »]]>
Wed, 21 Oct 2015 10:26:17 PDT
Linkit One - Strobe lights http://www.instructables.com/id/Linkit-One-Part-2-Strobe-lights/
Linkit One - Strobe lights - More DIY How To Projects]]> http://cdn.instructables.com/F7V/F5PW/IFZQUJ91/F7VF5PWIFZQUJ91.SQUARE2.jpg http://cdn.instructables.com/F7V/F5PW/IFZQUJ91/F7VF5PWIFZQUJ91.SQUARE.jpg http://cdn.instructables.com/F7V/F5PW/IFZQUJ91/F7VF5PWIFZQUJ91.SMALL.jpg HUKBMBEAR This guides follows on from my previous basic intro intocoding and the Linkit One board (http://www.instructables.com/id/Linkit-One-In-the-beginning/) the focus for this one is to take the single LED and increase the number and then change the code running the board so that the LED's have a strobin...
By: HUKBMBEAR

Continue Reading »]]>
Wed, 21 Oct 2015 10:08:13 PDT
Linkit One - In the beginning http://www.instructables.com/id/Linkit-One-In-the-beginning/
Linkit One - In the beginning - More DIY How To Projects]]> http://cdn.instructables.com/F8Q/OUK1/IFO6Y31Z/F8QOUK1IFO6Y31Z.SQUARE2.jpg http://cdn.instructables.com/F8Q/OUK1/IFO6Y31Z/F8QOUK1IFO6Y31Z.SQUARE.jpg http://cdn.instructables.com/F8Q/OUK1/IFO6Y31Z/F8QOUK1IFO6Y31Z.SMALL.jpg HUKBMBEAR Everyone has to start somewhere, and while turning an LED on and off is a very basic function not everyone can do it immediately.So yes Im expecting a few comments on how simple this is, but its a starting point.Personally this is the first time I have used the LinkIt One board, I never even know it...
By: HUKBMBEAR

Continue Reading »]]>
Mon, 12 Oct 2015 11:06:32 PDT
Arduino Battery Shield http://www.instructables.com/id/Arduino-Battery-Shield/
Arduino Battery Shield - More DIY How To Projects]]> http://cdn.instructables.com/FSB/TKUT/IEKJ7V63/FSBTKUTIEKJ7V63.SQUARE2.jpg http://cdn.instructables.com/FSB/TKUT/IEKJ7V63/FSBTKUTIEKJ7V63.SQUARE.jpg http://cdn.instructables.com/FSB/TKUT/IEKJ7V63/FSBTKUTIEKJ7V63.SMALL.jpg MarPok "Scotty, we need more Power!". This instructable is about making battery shield for Arduino. Material Material list: flat lithium battery (e.g. taken from old mobile phone) (I used battery for Huawei Ideos X5 U8800) Li-ion charger module with TP4056 (see on eBay) DC-to-DC step-up module, with V...
By: MarPok

Continue Reading »]]>
Tue, 15 Sep 2015 15:24:53 PDT
Monitoring Load Feedback of an Actuator http://www.instructables.com/id/Monitoring-Load-Feedback-of-an-Actuator/
Monitoring Load Feedback of an Actuator - More DIY How To Projects]]> http://cdn.instructables.com/FJA/Z1ZQ/IDSN9VJI/FJAZ1ZQIDSN9VJI.SQUARE2.jpg http://cdn.instructables.com/FJA/Z1ZQ/IDSN9VJI/FJAZ1ZQIDSN9VJI.SQUARE.jpg http://cdn.instructables.com/FJA/Z1ZQ/IDSN9VJI/FJAZ1ZQIDSN9VJI.SMALL.jpg ProgressiveAuto1 In this Instructable, we'll be learning how to monitor the amount of current that an actuator is using, so that you can tell how much force it is applying. This is a more advanced project, requiring in-depth coding and calibrating.The programming we will be doing today will cover debouncing of switc...
By: ProgressiveAuto1

Continue Reading »]]>
Wed, 26 Aug 2015 13:19:12 PDT
Usando Arduino Shield Freescale FRDM-STBC-AGM01 http://www.instructables.com/id/Usando-Arduino-Shield-Freescale-FRDM-STBC-AGM01/
Usando Arduino Shield Freescale FRDM-STBC-AGM01 - More DIY How To Projects]]> http://cdn.instructables.com/FBL/Q1RZ/IDFSHRU1/FBLQ1RZIDFSHRU1.SQUARE2.jpg http://cdn.instructables.com/FBL/Q1RZ/IDFSHRU1/FBLQ1RZIDFSHRU1.SQUARE.jpg http://cdn.instructables.com/FBL/Q1RZ/IDFSHRU1/FBLQ1RZIDFSHRU1.SMALL.jpg sabas1080 Hola amigosEn esta ocasión les voy a mostrar como utilizar el shield de Freescale FRDM-STBC-AGM01 en Arduino, este shield incluye un giroscopio, acelerometro, magnetometro y sensor de temparatura gracias a los chips FXOS8700CQ y FXAS21002C que están integrados en la tarjeta, muy interesante ...
By: sabas1080

Continue Reading »]]>
Mon, 17 Aug 2015 16:05:42 PDT
How to Make Custom Shields for Your Microcontrollers http://www.instructables.com/id/How-to-Make-Custom-Shields-for-Your-Microcontrolle/
How to Make Custom Shields for Your Microcontrollers - More DIY How To Projects]]> http://cdn.instructables.com/F48/0F9V/ICM6ZISQ/F480F9VICM6ZISQ.SQUARE2.jpg http://cdn.instructables.com/F48/0F9V/ICM6ZISQ/F480F9VICM6ZISQ.SQUARE.jpg http://cdn.instructables.com/F48/0F9V/ICM6ZISQ/F480F9VICM6ZISQ.SMALL.jpg DIY Hacks and How Tos Microcontrollers such as Arduinos are a great way to control your custom electronics projects. But you always need some way to connect the external components to the microcontroller board. Jumper wires can work for this, but having too many loose wires running around is just asking for trouble. A go...
By: DIY Hacks and How Tos

Continue Reading »]]>
Mon, 27 Jul 2015 14:31:07 PDT
Cheapest way to connect arduino to internet http://www.instructables.com/id/Connect-Arduino-Router-without-any-sheilds/
Cheapest way to connect arduino to internet - More DIY How To Projects]]> http://cdn.instructables.com/FH6/FZN3/ICM6YCZU/FH6FZN3ICM6YCZU.SQUARE2.jpg http://cdn.instructables.com/FH6/FZN3/ICM6YCZU/FH6FZN3ICM6YCZU.SQUARE.jpg http://cdn.instructables.com/FH6/FZN3/ICM6YCZU/FH6FZN3ICM6YCZU.SMALL.jpg Narzan Qarma Cheapest way to connect Arduino to internetShields here costly! and this bothers me a lot. It's impossible to build your own automation system without shields.I found some articles on internet but for my bad luck non of them worked on my routers. All articles were talking about a specific router. ...
By: Narzan Qarma

Continue Reading »]]>
Mon, 27 Jul 2015 00:19:07 PDT
Arduino Stepper Motors http://www.instructables.com/id/Arduino-Stepper-Motors/
Arduino Stepper Motors - More DIY How To Projects]]> http://cdn.instructables.com/FFL/T98S/IBL62K7N/FFLT98SIBL62K7N.SQUARE2.jpg http://cdn.instructables.com/FFL/T98S/IBL62K7N/FFLT98SIBL62K7N.SQUARE.jpg http://cdn.instructables.com/FFL/T98S/IBL62K7N/FFLT98SIBL62K7N.SMALL.jpg cornelam When we need precision and repeatability, a stepper motor is always the solution. With the way it is designed, a stepper can only move from one step to the next and fix in that position. A typical motor has 200 steps per revolution; if we tell the motor to go 100 steps in one direction, it will turn...
By: cornelam

Continue Reading »]]>
Wed, 1 Jul 2015 18:52:36 PDT
A Cheaper ESP8266 WiFi Shield for Arduino and other micros http://www.instructables.com/id/ESP8266-WiFi-Shield-for-Arduino-and-other-micros/
A Cheaper ESP8266 WiFi Shield for Arduino and other micros - More DIY How To Projects]]> http://cdn.instructables.com/FGB/J6NQ/IE183HO4/FGBJ6NQIE183HO4.SQUARE2.jpg http://cdn.instructables.com/FGB/J6NQ/IE183HO4/FGBJ6NQIE183HO4.SQUARE.jpg http://cdn.instructables.com/FGB/J6NQ/IE183HO4/FGBJ6NQIE183HO4.SMALL.jpg drmpf Update: 17th December 2105Rev 11 of this project cleans up other attempted connections if it is already connected. Also uses the timeout set by the web config. Rev 10 ignored the timeout setting.Update: 11th November 2015This is Rev 10 of the this project. Rev 10 uses a non-blocking WiFi library, pf...
By: drmpf

Continue Reading »]]>
Mon, 29 Jun 2015 02:06:43 PDT
Unboxing the ADRC Shield http://www.instructables.com/id/Unboxing-the-ADRC-Shield/
Unboxing the ADRC Shield - More DIY How To Projects]]> http://cdn.instructables.com/FM3/84GC/IBDHTMO6/FM384GCIBDHTMO6.SQUARE2.jpg http://cdn.instructables.com/FM3/84GC/IBDHTMO6/FM384GCIBDHTMO6.SQUARE.jpg http://cdn.instructables.com/FM3/84GC/IBDHTMO6/FM384GCIBDHTMO6.SMALL.jpg ADRCtech In this Instructable we demonstrate how to unbox an ADRC Shield and run the 'ledonoff' app that comes pre-installed on it. Your pack will contain one or more shields (depending on which one you ordered) and a hub. You should be aware that it does not contain an Arduino board. You will have to source...
By: ADRCtech

Continue Reading »]]>
Wed, 24 Jun 2015 16:18:40 PDT
Very Cheap/Simple WiFi Shield for Arduino and microprocessors http://www.instructables.com/id/CheapSimple-Wifi-Shield-for-Arduino-and-other-micr/
Very Cheap/Simple WiFi Shield for Arduino and microprocessors - More DIY How To Projects]]> http://cdn.instructables.com/F0E/APOA/IE1848BM/F0EAPOAIE1848BM.SQUARE2.jpg http://cdn.instructables.com/F0E/APOA/IE1848BM/F0EAPOAIE1848BM.SQUARE.jpg http://cdn.instructables.com/F0E/APOA/IE1848BM/F0EAPOAIE1848BM.SMALL.jpg drmpf Update: 17th December 2015Rev 11 of this project cleans up other attempted connections if it is already connected. Also uses the timeout set by the web config. Rev 10 ignored the timeout setting.Update: 11th November 2015This is Rev 10 of the this project. Rev 10 uses a non-blocking WiFi library, pf...
By: drmpf

Continue Reading »]]>
Wed, 24 Jun 2015 07:12:55 PDT
An RFID Dog Toy with Sounds http://www.instructables.com/id/An-RFID-Dog-Toy-with-Sounds/
An RFID Dog Toy with Sounds - More DIY How To Projects]]> http://cdn.instructables.com/F22/DKYR/IA3RAGBE/F22DKYRIA3RAGBE.SQUARE2.jpg http://cdn.instructables.com/F22/DKYR/IA3RAGBE/F22DKYRIA3RAGBE.SQUARE.jpg http://cdn.instructables.com/F22/DKYR/IA3RAGBE/F22DKYRIA3RAGBE.SMALL.jpg Colombinary For my MSc in Interaction Design thesis at Malmö University (Sweden), I built a prototype dog toy that could capture both sound and smell. I started with a lo-fi prototype including a soft toy in which I could hide a phone that played pre-recorded sounds that could be recognizable for the dog. Anoth...
By: Colombinary

Continue Reading »]]>
Mon, 25 May 2015 07:23:19 PDT