Instructables: exploring - technology - cell-phones - stand Wed, 1 Jul 2015 05:27:36 PDT BLOX v1.01 Phone Stand Under 30 Seconds
Phone Stand Under 30 Seconds - More DIY How To Projects]]> VideoBlinks How to make a Phone Stand under 30 SecondsItems required:- old credit card, gift card or royalty card-ruler Take the card and measure it half an inch on one side, place a ruler on that mark.Put it on the table and bend it.Turn the card to the back side and on the opposite side measure 1 inch.Pla...
By: VideoBlinks

Continue Reading »]]>
Fri, 19 Jun 2015 17:08:55 PDT
Hockey Puck Phone Stand-Minimalistic version (v2.0)
Hockey Puck Phone Stand-Minimalistic version (v2.0) - More DIY How To Projects]]> pucksurfer For all of you hockey fans out there, this is for you... (and me). I bring to you, a hockey puck mobile device stand, version 2. You can see my original puck stand, which turned out very ummmm, interesting to say the least. Anyway, this is a pretty easy and simple way to turn an old puck, into a swe...
By: pucksurfer

Continue Reading »]]>
Mon, 8 Jun 2015 06:25:37 PDT
DIY Easy Phone Stand
DIY Easy Phone Stand - More DIY How To Projects]]> VideoBlinks DIY Easy Phone Stand
By: VideoBlinks

Continue Reading »]]>
Sat, 6 Jun 2015 12:03:53 PDT
Smartphone Stand
Smartphone Stand - More DIY How To Projects]]> pensa A simple yet elegant stand for your smartphone. Gather the Necessary Materials and Tools Material: 1 length .125" Steel Wire Tools: Wire Cutters, Pliers, Pack of SugruTime: 15 Minutes (+ 24-hour Sugru cure) Skill Level: EasySugru is not essential but it's pretty cool! And a nice addition to this ...
By: pensa

Continue Reading »]]>
Mon, 1 Jun 2015 13:29:14 PDT
A PDA or Phone Desk Stand
A PDA or Phone Desk Stand - More DIY How To Projects]]> scd I made this stand for a PDA (that I use primarily as a world-time desk clock) but it could be scaled up or down to fit a phone or phablet. Here is the parts list: 1x small scrap of 1/4" (~6mm) plywood (scrap bin) 3x T-nuts 1/4"x20 thread(Home Depot) 2x 1.5" carriage bolts (Home Depot) 1x 3/8" shrink...
By: scd

Continue Reading »]]>
Fri, 24 Apr 2015 19:35:17 PDT
Tablet stand / Phone stand
Tablet stand / Phone stand - More DIY How To Projects]]> dermbrian No need for detailed instructions. No cutting. Maybe some sanding. Readily available materials. There's not much to this... And I'm really only posting this because a search of the site didn't come up with anything that worked as well as this simple, cheap and easy-to-make tablet stand.Full cr...
By: dermbrian

Continue Reading »]]>
Sun, 8 Mar 2015 23:42:26 PDT
Laser Cut Phone Stand Multi-tool
Laser Cut Phone Stand Multi-tool - More DIY How To Projects]]> Hoodnj In this instructable I will show you how to make a laser cut phone stand. Its small and portable and easy to use, plus it has some additional features. Its simple to make and very customizable to fit your needs.For this project you will need:WoodA Laser CutterA computer with AutoCADWood GlueSandpape...
By: Hoodnj

Continue Reading »]]>
Tue, 11 Nov 2014 06:36:38 PST
Simple Smartphone Stand
Simple Smartphone Stand - More DIY How To Projects]]> scotjo This is a quick project to create a simple, one-piece smartphone stand. Use it as a tripod for selfies or timelapse videos, a base for use on a nightstand, or as a stand to hold the phone while watching videos. These examples were made using containers found around my house. The only tools needed a...
By: scotjo

Continue Reading »]]>
Sun, 26 Oct 2014 12:54:02 PDT
Cheapest,easiest wire smartphone stand EVER
Cheapest,easiest wire smartphone stand EVER - More DIY How To Projects]]> rellik1000 "Necessity is the mother of invention"Find yourself about 12 inches of soft wire.Some dollar stores carry 6 foot spools of 14 gauge aluminum floral wire in different colors.Most hardware stores sell bulk 14/3 (14 gauge,3 conductor standard household wiring)solid copper electrical wire for less than ...
By: rellik1000

Continue Reading »]]>
Sat, 25 Oct 2014 15:31:52 PDT
Phone Stand & Headphone Wrap
Phone Stand & Headphone Wrap - More DIY How To Projects]]> burgtb This simple and compact phone stand will hold almost any device. It works with Androids, IPhones, Tablets, and many other devices. It folds together for comfortable transport and fits perfectly on a key chain. When it is not holding your device, the stand will keep your head phones neat and together...
By: burgtb

Continue Reading »]]>
Thu, 23 Oct 2014 06:46:43 PDT
Laser-Cut Phone Stand
Laser-Cut Phone Stand - More DIY How To Projects]]> JTotes99 This is a phone stand that is portable and easy to use. I made this using a laser in my school to cut the wood, so you'll need to make sure you have access to one before you start.Supplies Needed: 0.115 inch-think wood, wood glue, sand paperThe original idea to create a phone stand came from a proje...
By: JTotes99

Continue Reading »]]>
Wed, 22 Oct 2014 06:20:43 PDT
DIY Cellphone stand from cap of bottle
DIY Cellphone stand from cap of bottle - More DIY How To Projects]]> esarguns Make yourself a nice cellphone stand from cap of bottle in 5 minutes!Despite small diameter such construction is very stable (see video) Get a cap from a bottle Just take some bigger plastic cap from bottle (5 litre bottles - ~ 3-4 cm in diameter). You probably throw out such caps every day :) ...
By: esarguns

Continue Reading »]]>
Tue, 7 Oct 2014 13:13:20 PDT
Paper Clip Iphone Stand
Paper Clip Iphone Stand - More DIY How To Projects]]> jdgreen This paper clip stand is easy to make and effective. You can almost make one anywhere you can find a paper clip! The can hold a phone/iPod horizontally or vertically. You can also display images such as a post card with them! What You'll Need For this project you'll need...Large paper clipPliers...
By: jdgreen

Continue Reading »]]>
Mon, 23 Jun 2014 12:43:37 PDT
Binder Clip Phone Stand
Binder Clip Phone Stand - More DIY How To Projects]]> vmathur3 Make an AWESOME stand for ANY Phone in seconds!!! All you need is 3 binder clips of the same size (preferably medium), and you're good to go! Assembly Straighten the pins of the first clip, and attach the second clip onto them.See the images for further clarification. Final Touches Now take th...
By: vmathur3

Continue Reading »]]>
Mon, 26 May 2014 01:00:46 PDT
Phone Stand
Phone Stand - More DIY How To Projects]]> Milz2000 This Is A Phone Stand I Made In Dt At School null I Have A Hard Wood Base null Metal Bracket Screwed In null Plastic Legs To Support The Phone Which Have Been Epoxied In null Hope This Give You Some Idea This took about 10 50min lessons including drawings and manufacturing. Plea...
By: Milz2000

Continue Reading »]]>
Wed, 9 Apr 2014 12:34:48 PDT
Smartphone Tripod & Stand, small and foldable
Smartphone Tripod & Stand, small and foldable - More DIY How To Projects]]> Benny Johansson How to make a small stand for smartphones, - Two sides, "tripod" on one and viewing stand on the other. - Can be folded flat, small enough to fit in a wallet. - The phone can be tilted 0-15 degrees on the tripod side. Materials: - a piece of polypropylene (PP) plastic sheet 0,6-0,8 mm thick, 18,...
By: Benny Johansson

Continue Reading »]]>
Tue, 4 Mar 2014 10:28:26 PST
Wanna be a YouTube star? Well, you gotta have a camera (stand)!
Wanna be a YouTube star? Well, you gotta have a camera (stand)! - More DIY How To Projects]]> keokg2 So you want to be a star huh?  GREAT!  But maybe you can't afford a really good camera?  Maybe you only have your phone camera?  GREAT!!!  That'll work but do you ever have the problem where to put the thing?  Mine keeps sliding down when I set it against something or the angle is wrong.  Plus I don...
By: keokg2

Continue Reading »]]>
Sun, 2 Mar 2014 17:39:33 PST
Paracord Phone Stand
Paracord Phone Stand - More DIY How To Projects]]> pucksurfer So, I had some extra paracord and I was wondering what to do with it and then it hit me. I thought that I should make a phone stand... Out of paracord. All you are going to new is some paracord and some fairly strong wire Threading The Wire Fist you need to take out the white strings from the i...
By: pucksurfer

Continue Reading »]]>
Thu, 20 Feb 2014 18:42:56 PST
Poor man's mobile case, stand and more ...
Poor man's mobile case, stand and more ... - More DIY How To Projects]]> bobes360 How to make a mobile case, half-case, stand, screen protector for no money at all.... Step 1 : Materials All you need is a mobile phone (of course, why would you do it without a mobile phone) and a box and the other stuff you get with your mobile phone. Step 2 Use these three things to make y...
By: bobes360

Continue Reading »]]>
Thu, 20 Feb 2014 08:44:23 PST
Quick and easy tablet stand.
Quick and easy tablet stand. - More DIY How To Projects]]> Todd Gehris I wanted to watch a video today on my tablet and needed a stand for it. In the past I had made stands out of file folders to prop up papers for typing. I figured it would be an easy thing to make a stand for a tablet using the same method. Before going to upload this I looked and discovered there w...
By: Todd Gehris

Continue Reading »]]>
Sun, 12 Jan 2014 10:37:00 PST
Gadget stands on my desk (at work). An old cassette case flipped around to make a stand for my phone. (Since I used the phone to take the picture, this sticky note pad served as a stand-in.) The hole in the corner of my Nook HD+ is perfect for using a pen to stand it up. Lastly, a pair of hooks, used for hanging coats, etc, on the p...

Continue Reading »]]>
Tue, 17 Dec 2013 19:54:24 PST
Duplo universal smart phone stand bubblewrap74 I was having trouble finding a stable DIY phone stand on the web. I wanted one that would accommodate the phone in portrait mode, because I have a workout app that does not support landscape. I tried several different DIY projects and none of them seemed very stable. The ones that looked better seem...
By: bubblewrap74

Continue Reading »]]>
Tue, 26 Nov 2013 20:25:12 PST
DIY Phone Stand - Paper Clip Mobile Phone Stand - 2min, $0 Project
DIY Phone Stand - Paper Clip Mobile Phone Stand - 2min, $0 Project - More DIY How To Projects]]> ab727 This is a very easy project to make a Mobile Phone / Tablet / Phablet Stand using just a paper clip. The phone can be held in either the landscape or portrait mode. The phone that I used to test this out was Motorola Defy which is a 115g phone. The Tablet that I used to test this was Nexus 7. The tr...
By: ab727

Continue Reading »]]>
Wed, 21 Aug 2013 08:32:08 PDT
$1 tablet/phone stand!
$1 tablet/phone stand! - More DIY How To Projects]]> rint -hello here is explanation about my tablet stand- it was not difficult to make and its very handy! mine one is for the nexus 7 but it does not matter what kind of device you have for this project you can have this stand in portrait and landscape mode! needs: to make this stand you need: -some t...
By: rint

Continue Reading »]]>
Sat, 17 Aug 2013 11:00:43 PDT
Multi-axis Phone Stand (completed Version)
Multi-axis Phone Stand (completed Version) - More DIY How To Projects]]> RickiDuff842 Some of you may have seen my prototype of this multi axis phone stand which will show you how to make this but out of polystyrene pizza trays which after my phone being it it for a night, one ring had snapped an the other 2 had become deformed so I made this new one out of a piece of old floor board...
By: RickiDuff842

Continue Reading »]]>
Fri, 26 Jul 2013 08:38:30 PDT
Multi-axis Phone Stand
Multi-axis Phone Stand - More DIY How To Projects]]> RickiDuff842 This is my prototype version of a multi-axis phone stand. I got this idea from watching a tv show where they used a gyroscope chair which NASA use to simulate an out of control space shuttle. What I Used (Sorry not all items are in these pictures)Materials:•2 plastic pizza ...
By: RickiDuff842

Continue Reading »]]>
Tue, 23 Jul 2013 14:43:51 PDT
Make simple and cheap phone holder/tripod kankintojas Simple tutorial how to make phone holder/tripod out of egg box.
By: kankintojas

Continue Reading »]]>
Fri, 19 Jul 2013 12:16:42 PDT
Turn Your Phone Into A GPS Using K'nex!
Turn Your Phone Into A GPS Using K'nex! - More DIY How To Projects]]> nerfrocketeer Imagine this: your lost in the wilderness on a lonely back road. You have no idea where you are and no way to find out. If only you had a way to find your way home! Luckily, you still have your cell phone and a box of K'nex in the trunk. It's time to make the (emergency) K'nex GPS/phone holder! This...
By: nerfrocketeer

Continue Reading »]]>
Sun, 16 Jun 2013 17:59:38 PDT
Android phone stand with Lego crosendahl I love my Nexus phone, but the accessories market for Android phones is pretty weak. I use my phone as an alarm clock at night while I recharge it, jammed between books and the lamp on my nightstand so it's readable. It was time to correct this problem, and Lego is always a great solution. This is...
By: crosendahl

Continue Reading »]]>
Wed, 29 May 2013 21:36:39 PDT
Use a Bottle Top to Make a Vertical Cell Phone Stand Gregbot I use my cell phone for a lot of things. I need to hear the Timer go off especially. In my routine, missing it is DOOM! ... I needed a vertical stand to get the speaker and face up in the air. ... BUT ... I'm cheap and like to make my stuff if possible. So I used a wide lid from a plastic bottle. .....
By: Gregbot

Continue Reading »]]>
Wed, 29 May 2013 11:02:54 PDT
Old Card Phone Stand
Old Card Phone Stand - More DIY How To Projects]]> maxtateraven Welcome to an instruction guide to making a credit card or gift card phone holder. Follow these simple steps and put your unwanted and out of date cards to good use. This phone holder is suitable for most phones but purposely made for iPhones. The tutorial should take no more than 10-15 minutes to m...
By: maxtateraven

Continue Reading »]]>
Sat, 26 Jan 2013 14:00:57 PST
Typewriter iPad Stand
Typewriter iPad Stand - More DIY How To Projects]]> jackzylkin My USB Typewriter Conversion Kit  allows you to easily retrofit your old typewriter to work as a keyboard for computers and laptops, or even for tablets such as the iPad. In fact, you can even position your iPad on the roller so it acts as "virtual paper" for your typewriter. I just love the effect ...
By: jackzylkin

Continue Reading »]]>
Wed, 16 Jan 2013 14:55:49 PST
Adjustable Clip On Desktop Cellphone Holder
Adjustable Clip On Desktop Cellphone Holder - More DIY How To Projects]]> batteriesnotincluded My wife wanted a cell phone holder for her desk , so after looking around she didnt find one that she liked . so i decided to make her one that could be up off of the desk but still reachable It is adjustable for clamping onto the shelves ( multi positional you could say) ****** ALWAYS USE YOUR SA...
By: batteriesnotincluded

Continue Reading »]]>
Tue, 1 Jan 2013 21:47:36 PST
Quick and easy Android, i-phone, i-pod stand
Quick and easy Android, i-phone, i-pod stand - More DIY How To Projects]]> basementjax457 This is a quick and dirty little phone stand I made on the fly.  My daughter made a little volume booster for her iphone from a TP tube.  I was working on the stencil for the bleach print shirts and decided to watch some Firefly on netflix while I worked.  I took a look at my daughter's project and ...
By: basementjax457

Continue Reading »]]>
Tue, 7 Aug 2012 23:13:48 PDT
Beer coaster iPhone stand
Beer coaster iPhone stand - More DIY How To Projects]]> god1066 I run music events in pubs and bars and get aggravated by how many people waste beer mats. Whether they are being thrown at people, soaked by spilt drinks or torn up for no reason, the poor little things are always going to waste. I realized that they are made from pretty strong card and i decided t...
By: god1066

Continue Reading »]]>
Thu, 28 Jun 2012 06:32:13 PDT
Mobile Phone Stand
Mobile Phone Stand - More DIY How To Projects]]> davebe I wanted a stand for my phone, but I needed to be able to carry it around with me. The ideal size was a credit card. So it seemed obvious to make it out of one. Or rather, two. Find some credit cards Take 2 credit cards. These are for some lottery I think. They were giving them away at the corne...
By: davebe

Continue Reading »]]>
Thu, 26 Apr 2012 05:07:03 PDT
my iphone charger
my iphone charger - More DIY How To Projects]]> technology guy! Technology guy! presents my iphone charger design it Firstly sketch out the iphone charger. Here I've got the mesurements.iphone mesurements height 12 cm width 7 cm. charger mesurements height 14 cm width 16 cm  Get what you need. (see step 1) 2.cardboard 3.ruler 4.scissors glue...
By: technology guy!

Continue Reading »]]>
Wed, 21 Mar 2012 23:52:18 PDT
Camera Phone Tripod Mount
Camera Phone Tripod Mount - More DIY How To Projects]]> mr_snuffles I have a small desktop camera tripod that I wanted to fix my phone to for taking pictures This is another use for recycled wooden tea/coffee stirrers Assemble the sticks to the thickness of the phone and glue them together I find it easier to work in a smaller scale, glue them and clamp them t...
By: mr_snuffles

Continue Reading »]]>
Wed, 7 Mar 2012 06:38:11 PST
Phone Stand
Phone Stand - More DIY How To Projects]]> mr_snuffles This is my first Instructable... so be nice I decided to make a stand for my phone for when I am away from home, so atleast I can see a clock at night! This is a simple project that can be made using most things you will find around your office. I used recycled wooden stirrers from the cafeteria t...
By: mr_snuffles

Continue Reading »]]>
Wed, 29 Feb 2012 14:02:22 PST
Binder clip cellphone stand dkfotog I made this simple cellphone camera stand out of a pair of binder clips and a business card, to hold my phone steady while shooting video. No bending, folding or heavy lifting.
By: dkfotog

Continue Reading »]]>
Thu, 12 Jan 2012 20:33:22 PST
Innovative iPhone Stands Penolopy Bulnick From your desk to your car, there are many options for where to put your phone rather than your pocket.  Whether your style is simple and basic or complicated and intricate, we've collected the best. Take a look through these 16 innovative iPhone stands and see which one will show off your iPhone th...
By: Penolopy Bulnick

Continue Reading »]]>
Mon, 14 Nov 2011 16:51:29 PST
Smartphone stand lamoe I guess you’d call this a Findable not an Inscrutable. It’s the holder from a printer cartridge from Cartridge World it’s labeled as an Easlseclip. Comes in 2 versions. One has the thumb inline with the back, the other one is shown and has the thumb release perpendicular to the back. Both wok, but ...
By: lamoe

Continue Reading »]]>
Mon, 22 Aug 2011 18:13:41 PDT
Enter a TitleVertical / horizontal Smartphone stand lamoe Smartphones are extremely versatile and with their 4+” screens they make watching a movie or reading a book very easy but holding them for a period of time can be tiring. Commercially available stands run $25 to $30 and aren’t angle adjustable. This one is made from 1 refrigerator magnet clip, 1 b...
By: lamoe

Continue Reading »]]>
Sun, 7 Aug 2011 20:41:08 PDT
phone stand for less than $1
phone stand for less than $1 - More DIY How To Projects]]> Delta25 Hello in this instructable i will show you how to make a phone, gps or whatever stand.Sorry for my english,its not my native language. So first lets see the list of materials: Materials & Tools So for building you need: + A clip (found in any office) + A ball of paper, if its  tissue paper...
By: Delta25

Continue Reading »]]>
Sun, 31 Jul 2011 17:11:28 PDT
Yet Another Minute Mobile Stand
Yet Another Minute Mobile Stand - More DIY How To Projects]]> dahzz Here is my first instructable. The YAMMS (Yet Another Minute Mobile Stand). This instructable explain how to easily build a mobile stand with stuff you can find anywhere in One single minute or less ! Stuff You'll need Here we are, all the stuff you'll need is 2 old plastic card (Phonecard, lo...
By: dahzz

Continue Reading »]]>
Tue, 1 Mar 2011 03:30:36 PST
simple phone stand.
simple phone stand. - More DIY How To Projects]]> CaseBoy hi everyone, figure i post this for the people that want to make an phone or horizontal ipod stand. I find it works really well, and can be used on many different phones(with some adjustments)  you will need:a butter fly paperclip, and a pair of pliers. optional:plasti-dip. unbend first, you wa...
By: CaseBoy

Continue Reading »]]>
Sat, 19 Feb 2011 15:43:56 PST
iPhone simple acrylic stand capoeira4u If you've got the tools, time, and skill, you can make a really elegant acrylic stand for your iPhone 4.  But for those of us who don't (that includes me) here's a simple and cheap solution you can buy at most stationary stores.  I used a 2.2" x 3.6" acrylic holder for name cards.  It's totally unmo...
By: capoeira4u

Continue Reading »]]>
Mon, 31 Jan 2011 13:54:17 PST
Cell phone Desktop Stand
Cell phone Desktop Stand - More DIY How To Projects]]> Diabloscope i was thinking instead of my phone just lying on my desk / PC Station ,I can make a stand to prop my phone up , so away i went to the garage and in less than 10 minutes i came back with an  A frame style stand pretty basic i thought and easy , a week went by testing the stand of its flaws and how ...
By: Diabloscope

Continue Reading »]]>
Mon, 27 Dec 2010 04:11:31 PST
Mobile stand with kid shoes cocolol Here is a recycling idea. Use your kid shoes to build a smart mobile holder without doing any mods. You can extend this idea by drilling a hole in the sole and connect your charger from inside.
By: cocolol

Continue Reading »]]>
Thu, 24 Jan 2008 07:49:50 PST