Instructables: exploring - technology - cnc - router http://www.instructables.com Fri, 12 Feb 2016 23:02:56 PST BLOX v1.01 Machinable Wax on the CNC Router http://www.instructables.com/id/Machinable-Wax-on-the-CNC-Router/
Machinable Wax on the CNC Router - More DIY How To Projects]]> http://cdn.instructables.com/FE9/FHJ6/IKJ85YG7/FE9FHJ6IKJ85YG7.SQUARE2.jpg http://cdn.instructables.com/FE9/FHJ6/IKJ85YG7/FE9FHJ6IKJ85YG7.SQUARE.jpg http://cdn.instructables.com/FE9/FHJ6/IKJ85YG7/FE9FHJ6IKJ85YG7.SMALL.jpg dhpenner1 I came across http://www.machinablewax.com while researching various CNC related projects. It's a mixture of Wax and Plastic (polyethelene I think) and is much harder, has a higher melting point and is much more stable than regular wax. It comes in precast blocks, 3D printer filament and in bulk c...
By: dhpenner1

Continue Reading »]]>
Thu, 11 Feb 2016 21:37:41 PST
CNC FROM SCRAP http://www.instructables.com/id/CNC-FROM-SCRAP/
CNC FROM SCRAP - More DIY How To Projects]]> http://cdn.instructables.com/FKF/CCG0/IIXFDU0G/FKFCCG0IIXFDU0G.SQUARE2.jpg http://cdn.instructables.com/FKF/CCG0/IIXFDU0G/FKFCCG0IIXFDU0G.SQUARE.jpg http://cdn.instructables.com/FKF/CCG0/IIXFDU0G/FKFCCG0IIXFDU0G.SMALL.jpg zainm2 "DO IGNORE SOME SPELLING MISTAKES IF YOU SEE ANY "FOR MORE DETAILS DO CONTACT ME HERE ZAIN. Any one can create a CNC it easy and the possibility of changing it to a different machine are tremendous, by this I mean that you can change the machines tool to perform a different task for example LASER CU...
By: zainm2

Continue Reading »]]>
Sun, 3 Jan 2016 09:12:49 PST
Definity Collection and DMS One tool One setup http://www.instructables.com/id/Definity-Collection-and-DMS-One-tool-One-setup/
Definity Collection and DMS One tool One setup - More DIY How To Projects]]> http://cdn.instructables.com/FAO/5ZFF/IGS9JCMD/FAO5ZFFIGS9JCMD.SQUARE2.jpg http://cdn.instructables.com/FAO/5ZFF/IGS9JCMD/FAO5ZFFIGS9JCMD.SQUARE.jpg http://cdn.instructables.com/FAO/5ZFF/IGS9JCMD/FAO5ZFFIGS9JCMD.SMALL.jpg Aminimal We used this setup to make your Definity CollectionIn this tutorial for the DMS 5 axis CNC, We wanted to explore the possible way to setup the machine for one tool and one setup, so that 5/6 sides of a cube can be approached by the bit. Measure the tools and clearance of dust collector To get a f...
By: Aminimal

Continue Reading »]]>
Mon, 9 Nov 2015 17:49:22 PST
Homemade Mini Mill Router DIY XYZ Axis Slide CNC by Aluminium Alloy http://www.instructables.com/id/Homemade-Mini-Mill-Router-DIY-XYZ-Axis-Slide-CNC-b/
Homemade Mini Mill Router DIY XYZ Axis Slide CNC by Aluminium Alloy - More DIY How To Projects]]> http://cdn.instructables.com/F9H/E8W1/IGJR3OC9/F9HE8W1IGJR3OC9.SQUARE2.jpg http://cdn.instructables.com/F9H/E8W1/IGJR3OC9/F9HE8W1IGJR3OC9.SQUARE.jpg http://cdn.instructables.com/F9H/E8W1/IGJR3OC9/F9HE8W1IGJR3OC9.SMALL.jpg joulethief669 Homemade Mini Mill Router DIY XYZ Axis Slide CNC by Aluminium Alloy 6061Specification:Spindle Ozito or Dremel Rotary hand tools ( Ozito Rotary tools 170 Watt 12000 rpm )Z Axis Travel 250 mmY Axis Travel 100 mmX Axis Tavel 150 mmBed make by Aluminium Alloy 12 mm x 150 mm x 300 mmIt is very nice work...
By: joulethief669

Continue Reading »]]>
Wed, 4 Nov 2015 07:08:17 PST
Homemade Mini Mill Router DIY X Axis Slide CNC http://www.instructables.com/id/Homemade-Mini-Mill-Router-DIY-X-Axis-Slide-CNC/
Homemade Mini Mill Router DIY X Axis Slide CNC - More DIY How To Projects]]> http://cdn.instructables.com/FB6/7IBT/IGHVAP7L/FB67IBTIGHVAP7L.SQUARE2.jpg http://cdn.instructables.com/FB6/7IBT/IGHVAP7L/FB67IBTIGHVAP7L.SQUARE.jpg http://cdn.instructables.com/FB6/7IBT/IGHVAP7L/FB67IBTIGHVAP7L.SMALL.jpg joulethief669 Homemade Mini Mill Router DIY Y Axis Slide CNCSpecification:X Trvel 150 mmMaterial:1 pcs aluminium alloy 300 mm x 125 mm x 12mm for bed 1 pcs aluminium alloy 150 mm x 150 mm x 12mm for top 2 pcs aluminium alloy 125 mm x 45 mm x 20 mm for hold linear Slide Motion2 Pcs SC20UU 20mm Long Aluminum Linear...
By: joulethief669

Continue Reading »]]>
Mon, 2 Nov 2015 07:45:14 PST
Homemade Mini Mill Router DIY Z Axis Slide CNC Complette XYZ Axis http://www.instructables.com/id/Homemade-Mini-Mill-Router-DIY-Z-Axis-Slide-CNC-Com/
Homemade Mini Mill Router DIY Z Axis Slide CNC Complette XYZ Axis - More DIY How To Projects]]> http://cdn.instructables.com/FLP/AZ3M/IGJAR6EA/FLPAZ3MIGJAR6EA.SQUARE2.jpg http://cdn.instructables.com/FLP/AZ3M/IGJAR6EA/FLPAZ3MIGJAR6EA.SQUARE.jpg http://cdn.instructables.com/FLP/AZ3M/IGJAR6EA/FLPAZ3MIGJAR6EA.SMALL.jpg joulethief669 Homemade Mini Mill Router DIY Y Axis Slide CNCSpecification: Z Axis Trvel 250 mm with Hand Wheel DIYY Axis Trvel 150 mmX Axis Trvel 100 mm More Good Projects Homemade Nice Work for DIY Handmade here:Material: 2 Linear Bearing Flange Type/Linear Bushing Flange Type 25 mm2 pcs 400 mm 25mm Shaft Long H...
By: joulethief669

Continue Reading »]]>
Sun, 1 Nov 2015 08:39:28 PST
​DIY Y Axis Slide CNC for Homemade Mini Mill Router http://www.instructables.com/id/DIY-Y-Axis-Slide-CNC-for-Homemade-Mini-Mill-Router/
​DIY Y Axis Slide CNC for Homemade Mini Mill Router - More DIY How To Projects]]> http://cdn.instructables.com/F8Y/Y59R/IJYUODRR/F8YY59RIJYUODRR.SQUARE2.jpg http://cdn.instructables.com/F8Y/Y59R/IJYUODRR/F8YY59RIJYUODRR.SQUARE.jpg http://cdn.instructables.com/F8Y/Y59R/IJYUODRR/F8YY59RIJYUODRR.SMALL.jpg joulethief669 DIY Y Axis Slide CNC for Homemade Mini Mill Router by aluminium alloy Homemade mini Milling DIY X Y Z Slide CNC Drill Home Built Lathe Router MachineMaterial:1 pcs aluminium alloy 300 mm x 150 mm x 12mm for bed1 pcs aluminium alloy 122 mm x 300 mm x 12mm for X axis2 Pcs SC20UU 20mm Long Aluminum Lin...
By: joulethief669

Continue Reading »]]>
Fri, 30 Oct 2015 07:58:20 PDT
Homemade X Y Z Axis Slide for DIY CNC Router Milling http://www.instructables.com/id/Homemade-X-Y-Z-Axis-Slide-for-DIY-CNC-Router-Milli/
Homemade X Y Z Axis Slide for DIY CNC Router Milling - More DIY How To Projects]]> http://cdn.instructables.com/F6B/HFWW/IGC3EZCC/F6BHFWWIGC3EZCC.SQUARE2.jpg http://cdn.instructables.com/F6B/HFWW/IGC3EZCC/F6BHFWWIGC3EZCC.SQUARE.jpg http://cdn.instructables.com/F6B/HFWW/IGC3EZCC/F6BHFWWIGC3EZCC.SMALL.jpg joulethief669 Homemade X Y Z Axis Slide for DIY CNC Router MillingHomemade mini Milling DIY X Y Z Slide CNC Drill Home Built Lathe Router MachinePerfect to fit the most critical part of your home made or professional CNC project. More Good Projects Homemade Nice Work for DIY Handmade here:More economic, more prec...
By: joulethief669

Continue Reading »]]>
Tue, 27 Oct 2015 10:06:23 PDT
DIY XYZ Axis Slide CNC for Homemade Mini Milling Router Mill http://www.instructables.com/id/DIY-XYZ-Axis-Slide-CNC-for-Homemade-Mini-Milling-R/
DIY XYZ Axis Slide CNC for Homemade Mini Milling Router Mill - More DIY How To Projects]]> http://cdn.instructables.com/F5P/80IF/IFWTWFJX/F5P80IFIFWTWFJX.SQUARE2.jpg http://cdn.instructables.com/F5P/80IF/IFWTWFJX/F5P80IFIFWTWFJX.SQUARE.jpg http://cdn.instructables.com/F5P/80IF/IFWTWFJX/F5P80IFIFWTWFJX.SMALL.jpg joulethief669 DIY XYZ Axis Slide CNC for Homemade Mini Milling Router MillMore Homemade mini Milling DIY X Y Z Slide CNC Drill Home Built Lathe Router Machine2 pcs 20mm x 300 mm linear shaft Cylinder Liner Rail Linear Shaft axis cnc parts2 pcs SC20UU SCS8UU 20 mm Linear Motion Ball Bearing Slide Bushing Linear Sh...
By: joulethief669

Continue Reading »]]>
Mon, 19 Oct 2015 06:54:25 PDT
Homemade Mini Milling Router Mill with Makita Maktec Spindle http://www.instructables.com/id/Homemade-Mini-Milling-Router-Mill-with-Makita-Makt/
Homemade Mini Milling Router Mill with Makita Maktec Spindle - More DIY How To Projects]]> http://cdn.instructables.com/FCT/DBF4/IFVC8UVR/FCTDBF4IFVC8UVR.SQUARE2.jpg http://cdn.instructables.com/FCT/DBF4/IFVC8UVR/FCTDBF4IFVC8UVR.SQUARE.jpg http://cdn.instructables.com/FCT/DBF4/IFVC8UVR/FCTDBF4IFVC8UVR.SMALL.jpg joulethief669 Homemade Mini Milling Router Mill with Makita Maktec SpindleHomemade mini Milling DIY X Y Z Slide CNC Drill Home Built Lathe Router MachineMakita Maktec Spindle Motor Speed: 33,000rpm ...
By: joulethief669

Continue Reading »]]>
Fri, 16 Oct 2015 06:32:22 PDT
Homemade XY Axis Slide for DIY Vertical Mill Router Mechanism CNC http://www.instructables.com/id/Homemade-XY-Axis-Slide-for-DIY-Vertical-Mill-Route/
Homemade XY Axis Slide for DIY Vertical Mill Router Mechanism CNC - More DIY How To Projects]]> http://cdn.instructables.com/FOQ/8Z4Y/ICD7G1MW/FOQ8Z4YICD7G1MW.SQUARE2.jpg http://cdn.instructables.com/FOQ/8Z4Y/ICD7G1MW/FOQ8Z4YICD7G1MW.SQUARE.jpg http://cdn.instructables.com/FOQ/8Z4Y/ICD7G1MW/FOQ8Z4YICD7G1MW.SMALL.jpg diyhobbybike Homemade XY Axis Slide for DIY Vertical Mill Router Mechanism CNCXY Axis Slide for DIY Vertical Mill Router with travel 280 mm for Y and 280 mm for X Easy do it in home with Aluminium Aloy and Linear Rail Shaft 400 mm and 300 mmYou can make it bigger and it nice work and very cheapMore Homemade Vert...
By: diyhobbybike

Continue Reading »]]>
Tue, 21 Jul 2015 15:44:44 PDT
Homemade Mini Press Drill for all Hand tools http://www.instructables.com/id/Homemade-Mini-Press-Drill-for-all-Hand-tools/
Homemade Mini Press Drill for all Hand tools - More DIY How To Projects]]> http://cdn.instructables.com/FH5/CQ6T/I9UE290E/FH5CQ6TI9UE290E.SQUARE2.jpg http://cdn.instructables.com/FH5/CQ6T/I9UE290E/FH5CQ6TI9UE290E.SQUARE.jpg http://cdn.instructables.com/FH5/CQ6T/I9UE290E/FH5CQ6TI9UE290E.SMALL.jpg joulethief669 Homemade Mini Press Drill for all Hand tools very cheap and easyParts and Tools:2 pcs Aluminium Alloy Profile 300 mm x 80 mm x 40 mm. Aluminium Alloy 6061 300 mm x 80 mm x 12 mm 2 pcs Aluminium Alloy 6061 70 mm x 70 mm x 12 mmAluminium Alloy 6061 60 mm x 160 mm x 12 mm1 Linear shaft 15 mm x 250 m...
By: joulethief669

Continue Reading »]]>
Wed, 20 May 2015 01:42:44 PDT
Making A Binford Tools Sign http://www.instructables.com/id/Making-A-Binford-Tools-Sign/
Making A Binford Tools Sign - More DIY How To Projects]]> http://cdn.instructables.com/FNF/1UO1/I9SMSF0V/FNF1UO1I9SMSF0V.SQUARE2.jpg http://cdn.instructables.com/FNF/1UO1/I9SMSF0V/FNF1UO1I9SMSF0V.SQUARE.jpg http://cdn.instructables.com/FNF/1UO1/I9SMSF0V/FNF1UO1I9SMSF0V.SMALL.jpg stangtime Making this sign was a blast. The software used was Inkscape and Jscut - both free programs! A snip of part of the Binford text was found online and brought into Inkscape. Once in Inkscape a bitmap trace was made. The smaller text was then added from the font selection within Inkscape. The desi...
By: stangtime

Continue Reading »]]>
Sun, 17 May 2015 18:18:26 PDT
Homemade Wood Metal Lathe very cheap http://www.instructables.com/id/Homemade-Wood-Metal-Lathe-very-cheap/
Homemade Wood Metal Lathe very cheap - More DIY How To Projects]]> http://cdn.instructables.com/FOY/FBUP/I9OSSBTM/FOYFBUPI9OSSBTM.SQUARE2.jpg http://cdn.instructables.com/FOY/FBUP/I9OSSBTM/FOYFBUPI9OSSBTM.SQUARE.jpg http://cdn.instructables.com/FOY/FBUP/I9OSSBTM/FOYFBUPI9OSSBTM.SMALL.jpg joulethief669 Homemade Mini Lathe Chuck Wood Metal Axis Tailstock DIY Router Spindle How to Make Drill CNC MachineDIY Wood Mini Lathe Metal Axis Homemade Tailstock with Motor Drill very cheap and easy:Parts and Tools: Wood MDF 200 mm x 650 mm x 20 mm2pcs SCS10UU 20 mm Linear Ball Bearing Motion Bearing CNC 2pcs ...
By: joulethief669

Continue Reading »]]>
Fri, 15 May 2015 01:47:42 PDT
DIY Wood Mini Lathe Metal Axis Homemade Tailstock with Motor Drill http://www.instructables.com/id/DIY-Wood-Mini-Lathe-Metal-Axis-Homemade-Tailstock-/
DIY Wood Mini Lathe Metal Axis Homemade Tailstock with Motor Drill - More DIY How To Projects]]> http://cdn.instructables.com/FBF/JF7G/I9FGVOOJ/FBFJF7GI9FGVOOJ.SQUARE2.jpg http://cdn.instructables.com/FBF/JF7G/I9FGVOOJ/FBFJF7GI9FGVOOJ.SQUARE.jpg http://cdn.instructables.com/FBF/JF7G/I9FGVOOJ/FBFJF7GI9FGVOOJ.SMALL.jpg joulethief669 DIY Wood Mini Lathe Metal Axis Homemade Tailstock with Motor Drill very cheap and easy:Parts and Tools:2 SCS10UU 20 mm Linear Ball Bearing Motion Bearing CNC 2 x 400 mm 20 mm Linear Rails Aluminium Alloy Profile 1200 mm x 40 mm x 20 mm Aluminium Alloy 6061 120 mm x 80 mm x 40 mm. Lathe Chuck 80 mm2...
By: joulethief669

Continue Reading »]]>
Sat, 9 May 2015 01:30:15 PDT
DIY Mini Mill Router Machine by Slide Axis CNC and Aluminium Alloy Profile http://www.instructables.com/id/DIY-Mini-Mill-Router-Machine-by-Slide-Axis-CNC-and/
DIY Mini Mill Router Machine by Slide Axis CNC and Aluminium Alloy Profile - More DIY How To Projects]]> http://cdn.instructables.com/FUR/7BPR/I99R88X7/FUR7BPRI99R88X7.SQUARE2.jpg http://cdn.instructables.com/FUR/7BPR/I99R88X7/FUR7BPRI99R88X7.SQUARE.jpg http://cdn.instructables.com/FUR/7BPR/I99R88X7/FUR7BPRI99R88X7.SMALL.jpg joulethief669 DIY Mini Mill Router Machine by Slide Axis CNC and Aluminium Alloy Profile very cheapParts and Tools:4 or 6 or 8 SCS10UU 20 mm Linear Ball Bearing Motion Bearing CNC 2 x 300 mm 20 mm Linear Rails2 x 400 mm 20 mm Linear Rails2 pcs Aluminium Alloy Profile 400 mm x 80 mm 2 pcs Aluminium Alloy Profile 3...
By: joulethief669

Continue Reading »]]>
Sun, 3 May 2015 08:04:14 PDT
CNC - Backlit LED Sign http://www.instructables.com/id/CNC-Backlit-LED-Sign/
CNC - Backlit LED Sign - More DIY How To Projects]]> http://cdn.instructables.com/FCN/BAWP/I8WW1GE5/FCNBAWPI8WW1GE5.SQUARE2.jpg http://cdn.instructables.com/FCN/BAWP/I8WW1GE5/FCNBAWPI8WW1GE5.SQUARE.jpg http://cdn.instructables.com/FCN/BAWP/I8WW1GE5/FCNBAWPI8WW1GE5.SMALL.jpg stangtime This was a fun project. Using a relatively inexpensive CNC, some scrap wood, and some LED lights it's possible to make some really cool back lit signs. Back lit signs are also possible with nothing more than a rotary tool and some time. Thanks for taking a look.To manipulate the graphics I used a...
By: stangtime

Continue Reading »]]>
Sat, 25 Apr 2015 15:42:45 PDT
My High School CNC Projects http://www.instructables.com/id/My-High-School-CNC-Projects/
My High School CNC Projects - More DIY How To Projects]]> http://cdn.instructables.com/FVX/ZET3/I6YXW270/FVXZET3I6YXW270.SQUARE2.jpg http://cdn.instructables.com/FVX/ZET3/I6YXW270/FVXZET3I6YXW270.SQUARE.jpg http://cdn.instructables.com/FVX/ZET3/I6YXW270/FVXZET3I6YXW270.SMALL.jpg RyanB10 My CNC endeavor started with a 9th grade science fair project. Since then (currently in 11th, 16 years old) it has grown into my hobby and favorite pastime, this is my CNC story. My First CNC, science project In 9th grade my friend and I took on a challenge, develop an alternative method of makin...
By: RyanB10

Continue Reading »]]>
Sun, 8 Mar 2015 22:11:43 PDT
3D Puzzle Maze CNC http://www.instructables.com/id/3D-Puzzle-Maze-CNC/
3D Puzzle Maze CNC - More DIY How To Projects]]> http://cdn.instructables.com/FAS/EIT6/I6RSIBFW/FASEIT6I6RSIBFW.SQUARE2.jpg http://cdn.instructables.com/FAS/EIT6/I6RSIBFW/FASEIT6I6RSIBFW.SQUARE.jpg http://cdn.instructables.com/FAS/EIT6/I6RSIBFW/FASEIT6I6RSIBFW.SMALL.jpg Cheapdiyproject This is a very challenging 3D puzzle maze project for CNC machines. Download files and adjust for your machine. Download the files, and adjust the files as needed for your production method. It is possible to just open the files, and hit the computer print button and cut the pieces with scissors,...
By: Cheapdiyproject

Continue Reading »]]>
Mon, 2 Mar 2015 15:18:47 PST
My First CNC Machine http://www.instructables.com/id/My-First-CNC-Machine/
My First CNC Machine - More DIY How To Projects]]> http://cdn.instructables.com/FV3/MUVS/I6NICOED/FV3MUVSI6NICOED.SQUARE2.jpg http://cdn.instructables.com/FV3/MUVS/I6NICOED/FV3MUVSI6NICOED.SQUARE.jpg http://cdn.instructables.com/FV3/MUVS/I6NICOED/FV3MUVSI6NICOED.SMALL.jpg madguernseyboy This CNC was created using parts bought though the Kickstarter project www.aquickcnc.com.Here is the Ended Kickstarted Project https://www.kickstarter.com/projects/ajquick/cnc-b...The Design was built using Aluminium profiles and 3rd printed parts. The great part of the design of this is that the Ac...
By: madguernseyboy

Continue Reading »]]>
Sun, 1 Mar 2015 12:06:43 PST
CNC Padded Jewelry Boxes http://www.instructables.com/id/Padded-Jewelry-Boxes/
CNC Padded Jewelry Boxes - More DIY How To Projects]]> http://cdn.instructables.com/F8J/XDBL/I4SCON5Z/F8JXDBLI4SCON5Z.SQUARE2.jpg http://cdn.instructables.com/F8J/XDBL/I4SCON5Z/F8JXDBLI4SCON5Z.SQUARE.jpg http://cdn.instructables.com/F8J/XDBL/I4SCON5Z/F8JXDBLI4SCON5Z.SMALL.jpg MidnightMaker The frantic activity around the the holiday season (you would think that with a full 12 months notice it would be less so!) leaves very little time for making gifts. This year I managed to find the time and made jewelry boxes from wood boards. The boxes have an inlaid brass plate which are personall...
By: MidnightMaker

Continue Reading »]]>
Mon, 12 Jan 2015 14:38:44 PST
Build A Cheap Handcrafted CNC Mill http://www.instructables.com/id/My-Cheap-Handcrafted-CNC-Mill-Unfinished-Prototype/
Build A Cheap Handcrafted CNC Mill - More DIY How To Projects]]> http://cdn.instructables.com/F2L/N155/I3VH9UKW/F2LN155I3VH9UKW.SQUARE2.jpg http://cdn.instructables.com/F2L/N155/I3VH9UKW/F2LN155I3VH9UKW.SQUARE.jpg http://cdn.instructables.com/F2L/N155/I3VH9UKW/F2LN155I3VH9UKW.SMALL.jpg ASCAS Ever since I knew what a CNC was, I've dreamed of having one. As a kid, my parents didn't take it seriously. They said it was too impractical to buy one, specially for my age. CNC and 3D printing services in our country were absent at that time. I was very eager of building a DIY version so dreamed ...
By: ASCAS

Continue Reading »]]>
Fri, 19 Dec 2014 11:42:43 PST
Homemade Mini Wood Mill Router Milling Machine by Slide Axis CNC and Table Press Drill http://www.instructables.com/id/Homemade-Mini-Wood-Mill-Router-Milling-Machine-by-/
Homemade Mini Wood Mill Router Milling Machine by Slide Axis CNC and Table Press Drill - More DIY How To Projects]]> http://cdn.instructables.com/F2A/A8X2/I376RHVH/F2AA8X2I376RHVH.SQUARE2.jpg http://cdn.instructables.com/F2A/A8X2/I376RHVH/F2AA8X2I376RHVH.SQUARE.jpg http://cdn.instructables.com/F2A/A8X2/I376RHVH/F2AA8X2I376RHVH.SMALL.jpg easydiychina DIY Mini Wood Mill Router Milling Machine by Slide Axis CNC and Table Press Drill Homemade Y Axis Wood Slide CNC Homemade Y Axis Wood Slide CNC with scrap wood Homemade X Axis Slide by Wood Homemade X Axis Slide by Wood and complette with Table Press Drill
By: easydiychina

Continue Reading »]]>
Tue, 2 Dec 2014 05:34:09 PST
Homemade DIY Mini Wood Lathe Press Drill Dynamic Tailstock CNC Metal Mill Axis Router http://www.instructables.com/id/Homemade-DIY-Mini-Wood-Lathe-Press-Drill-Dynamic-T/
Homemade DIY Mini Wood Lathe Press Drill Dynamic Tailstock CNC Metal Mill Axis Router - More DIY How To Projects]]> http://cdn.instructables.com/FDA/FFAW/I1K3NFTK/FDAFFAWI1K3NFTK.SQUARE2.jpg http://cdn.instructables.com/FDA/FFAW/I1K3NFTK/FDAFFAWI1K3NFTK.SQUARE.jpg http://cdn.instructables.com/FDA/FFAW/I1K3NFTK/FDAFFAWI1K3NFTK.SMALL.jpg kaka45345 Homemade DIY Mini Wood Lathe Press Drill Dynamic Tailstock CNC Metal Mill Axis Router DIY X Y Axis Slide table DIY Mini Lathe by Aluminium Aloy DIY Mini Lathe by Aluminium Aloy DIY Lathe Chuck and Dynamic Tailstock DIY Lathe Chuck and Dynamic Tailstock with Cordless Drill
By: kaka45345

Continue Reading »]]>
Wed, 22 Oct 2014 07:28:28 PDT
How to write G code (basics) http://www.instructables.com/id/How-to-write-G-code-basics/
How to write G code (basics) - More DIY How To Projects]]> http://cdn.instructables.com/F4M/XJ8O/I1C3WG33/F4MXJ8OI1C3WG33.SQUARE2.jpg http://cdn.instructables.com/F4M/XJ8O/I1C3WG33/F4MXJ8OI1C3WG33.SQUARE.jpg http://cdn.instructables.com/F4M/XJ8O/I1C3WG33/F4MXJ8OI1C3WG33.SMALL.jpg Mach95 The basics of writing G code and some M code Write the Introduction Start the first line with a '%' then press enter. The next line should start with a capital 'o'. If the character there is a zero the machine will throw an error code. After the capital O and with no spaces there should be 4 or 5...
By: Mach95

Continue Reading »]]>
Thu, 16 Oct 2014 14:05:20 PDT
Solidoodle 2 (2nd Gen) to CNC Mill Conversion http://www.instructables.com/id/Solidoodle-2-2nd-Gen-to-CNC-Mill-Conversion/
Solidoodle 2 (2nd Gen) to CNC Mill Conversion - More DIY How To Projects]]> http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SQUARE2.jpg http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SQUARE.jpg http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SMALL.jpg andrew.moody.315 This Instructable is to demonstrate the procedure I used to convert my Solidoodle 2 (or 2nd Gen Solidoodle) to a desktop CNC mill. I took the minimalist approach and changed only those things necessary to complete the expected outcome. As a consequence, there is no additional hardware required. T...
By: andrew.moody.315

Continue Reading »]]>
Fri, 29 Aug 2014 18:00:47 PDT
CNC Art http://www.instructables.com/id/CNC-Art/
CNC Art - More DIY How To Projects]]> http://cdn.instructables.com/FIM/D5Y5/HV3ZOV07/FIMD5Y5HV3ZOV07.SQUARE2.jpg http://cdn.instructables.com/FIM/D5Y5/HV3ZOV07/FIMD5Y5HV3ZOV07.SQUARE.jpg http://cdn.instructables.com/FIM/D5Y5/HV3ZOV07/FIMD5Y5HV3ZOV07.SMALL.jpg alepalan I really wanted to make a few drawing on the CNC router (Shopbot Buddy). I did a few experiments using different techniques and mediums.I started using simply pen and paper, then refined that technique using a pen with a spring attached, later tried over canvas and finally using different markers. I...
By: alepalan

Continue Reading »]]>
Mon, 12 May 2014 17:42:03 PDT
Building a CNC router http://www.instructables.com/id/Building-a-CNC-router/
Building a CNC router - More DIY How To Projects]]> http://cdn.instructables.com/F8S/G95S/HMVJDE8H/F8SG95SHMVJDE8H.SQUARE2.jpg http://cdn.instructables.com/F8S/G95S/HMVJDE8H/F8SG95SHMVJDE8H.SQUARE.jpg http://cdn.instructables.com/F8S/G95S/HMVJDE8H/F8SG95SHMVJDE8H.SMALL.jpg Benne This instructable will show you how I built my CNC router. I hope you can draw some inspiration from my build and that this instructable will be helpful for your future projects. This instructable shows all the steps I went through in designing and building this CNC router. The main thing I like ab...
By: Benne

Continue Reading »]]>
Mon, 21 Oct 2013 04:51:57 PDT
CNC Picture Carving http://www.instructables.com/id/CNC-Picture-Carving/
CNC Picture Carving - More DIY How To Projects]]> http://cdn.instructables.com/FP0/4WKV/HCV91TCL/FP04WKVHCV91TCL.SQUARE2.jpg http://cdn.instructables.com/FP0/4WKV/HCV91TCL/FP04WKVHCV91TCL.SQUARE.jpg http://cdn.instructables.com/FP0/4WKV/HCV91TCL/FP04WKVHCV91TCL.SMALL.jpg stangtime As shown on many of my videos, I cobbled together a CNC machine recently.  While learning to use it I also wanted to be able to import g-code from regular digital pictures and do cuttings on wood and other materials.  I'm always looking for affordable options and I came across some software called S...
By: stangtime

Continue Reading »]]>
Sat, 9 Feb 2013 16:36:36 PST
DIY Drawerslide CNC Machine - Gantry Re-design http://www.instructables.com/id/DIY-Drawerslide-CNC-Machine-Gantry-Re-design/
DIY Drawerslide CNC Machine - Gantry Re-design - More DIY How To Projects]]> http://cdn.instructables.com/FUQ/6FMW/HCJO1ELN/FUQ6FMWHCJO1ELN.SQUARE2.jpg http://cdn.instructables.com/FUQ/6FMW/HCJO1ELN/FUQ6FMWHCJO1ELN.SQUARE.jpg http://cdn.instructables.com/FUQ/6FMW/HCJO1ELN/FUQ6FMWHCJO1ELN.SMALL.jpg stangtime I built a CNC machine that used a small inexpensive rotary tool that rode on one drawerslide.  It was fun to see it actually work (this was the first CNC machine that I have ever built) but it was limited in its ability to cut larger pieces of wood.  The small rotary tool also lacked torque and had ...
By: stangtime

Continue Reading »]]>
Thu, 31 Jan 2013 17:07:01 PST
From SketchUp to CNC Fabrication http://www.instructables.com/id/From-SketchUp-to-CNC-Fabrication/
From SketchUp to CNC Fabrication - More DIY How To Projects]]> http://cdn.instructables.com/FWI/2X5Q/HBPBS090/FWI2X5QHBPBS090.SQUARE2.jpg http://cdn.instructables.com/FWI/2X5Q/HBPBS090/FWI2X5QHBPBS090.SQUARE.jpg http://cdn.instructables.com/FWI/2X5Q/HBPBS090/FWI2X5QHBPBS090.SMALL.jpg phooddaniel This video series shows how to get from CAD, to CAM, to a CNC fabricated product.  The tools we will be using are SketchUp for CAD,  CamBam for CAM, Mach3 for gcode reading/CNC control, and a CNC router (greenBull from BuildYourCNC.com) for part fabrication.  Keep in mind during this tutorial that ...
By: phooddaniel

Continue Reading »]]>
Mon, 14 Jan 2013 14:35:19 PST
$400 DIY Drawer Slide CNC Machine http://www.instructables.com/id/400-DIY-Drawer-Slide-CNC-Machine/
$400 DIY Drawer Slide CNC Machine - More DIY How To Projects]]> http://cdn.instructables.com/FKX/G6MH/HBNXUZR8/FKXG6MHHBNXUZR8.SQUARE2.jpg http://cdn.instructables.com/FKX/G6MH/HBNXUZR8/FKXG6MHHBNXUZR8.SQUARE.jpg http://cdn.instructables.com/FKX/G6MH/HBNXUZR8/FKXG6MHHBNXUZR8.SMALL.jpg stangtime This is just a quick follow up video of my completed drawer slide CNC machine.  The total cost for this was around $400.  It took a couple months just working on it when I had the time.  The stepper motors and driver board (TB6560) were ordered through eBay for $175.   I would imagine that this gen...
By: stangtime

Continue Reading »]]>
Tue, 8 Jan 2013 18:35:45 PST
How to use a CNC Router at Techshop to build a simple 6 board chest out of a 2* 4 foot quarter sheet of half inch thick Birch plywood. I did it at Techshop! Did I say Techshop! http://www.instructables.com/id/How-to-use-a-CNC-Router-to-build-a-simple-6-board-/
How to use a CNC Router at Techshop to build a simple 6 board chest out of a 2* 4 foot quarter sheet of half inch thick Birch plywood. I did it at Techshop! Did I say Techshop! - More DIY How To Projects]]> http://cdn.instructables.com/FLO/MIVW/HBFFJ2Z4/FLOMIVWHBFFJ2Z4.SQUARE2.jpg http://cdn.instructables.com/FLO/MIVW/HBFFJ2Z4/FLOMIVWHBFFJ2Z4.SQUARE.jpg http://cdn.instructables.com/FLO/MIVW/HBFFJ2Z4/FLOMIVWHBFFJ2Z4.SMALL.jpg caladin How to use a CNC Router to build a simple 6 board chest out of a 2* 4 foot quarter sheet of ½ inch Birch plywood. I did it at Techshop! This is my first Instructable so please feel free to leave any constructive criticism in the comments, thanks! What is Techshop? follow this link! http://www.tech...
By: caladin

Continue Reading »]]>
Wed, 2 Jan 2013 13:24:49 PST
cnc machine http://www.instructables.com/id/cnc-machine-2/
cnc machine - More DIY How To Projects]]> http://cdn.instructables.com/F5Q/MKCQ/H9T4CHPK/F5QMKCQH9T4CHPK.SQUARE2.jpg http://cdn.instructables.com/F5Q/MKCQ/H9T4CHPK/F5QMKCQH9T4CHPK.SQUARE.jpg http://cdn.instructables.com/F5Q/MKCQ/H9T4CHPK/F5QMKCQH9T4CHPK.SMALL.jpg speed_hack cnc machine stuffydo.wordpress.com/ Drawing the machine I started by creating the design of the machine on SolidWorks.On the PDF i put all the measurements. start construction After seeing all the measurements, I calculated the amount of iron that I would need to build the machine. It was some...
By: speed_hack

Continue Reading »]]>
Sat, 24 Nov 2012 16:51:01 PST
Wood Nut for a Wood Vice Screw http://www.instructables.com/id/Nut-for-a-Wood-Vice-Screw/
Wood Nut for a Wood Vice Screw - More DIY How To Projects]]> http://cdn.instructables.com/FRU/1OX1/H8FYP141/FRU1OX1H8FYP141.SQUARE2.jpg http://cdn.instructables.com/FRU/1OX1/H8FYP141/FRU1OX1H8FYP141.SQUARE.jpg http://cdn.instructables.com/FRU/1OX1/H8FYP141/FRU1OX1H8FYP141.SMALL.jpg Scotttland In the construction of my leg vice, by the grace of the cosmos I came into possession of this huge wood screw.  I estimate it to be about 100 years old; it looks like it's seen enough action to have earned a few purple hearts and a postgraduate degree.  But the requisite nut, that component needed t...
By: Scotttland

Continue Reading »]]>
Wed, 31 Oct 2012 17:28:03 PDT
TheMaker2 Homemade CNC http://www.instructables.com/id/TheMaker2-Homemade-CNC/
TheMaker2 Homemade CNC - More DIY How To Projects]]> http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SQUARE2.jpg http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SQUARE.jpg http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SMALL.jpg msaleiro Hi! In this instructable I'm going to show you my second homemade CNC: TheMaker2. In order to build a more robust structure I decided not to build it with a moving gantry, but with a moving table on x axis and a fixed structure for y axis, which holds z axis. To make a CNC like this one I had to use...
By: msaleiro

Continue Reading »]]>
Tue, 23 Oct 2012 20:12:21 PDT
DIY Aluminum 3-AXIS CNC Router http://www.instructables.com/id/DIY-Aluminum-3-AXIS-CNC-Router/
DIY Aluminum 3-AXIS CNC Router - More DIY How To Projects]]> http://cdn.instructables.com/FGS/1N8P/HJ602W27/FGS1N8PHJ602W27.SQUARE2.jpg http://cdn.instructables.com/FGS/1N8P/HJ602W27/FGS1N8PHJ602W27.SQUARE.jpg http://cdn.instructables.com/FGS/1N8P/HJ602W27/FGS1N8PHJ602W27.SMALL.jpg schou This is a CNC I built from scratch using mostly 3/4" x 3/4" x1/16" aluminum square tubing. I got the design by looking around for ideas on Google and mostly just improvised as I got to each phase. The total cutting area is about 12" x 8" x 3" (X by Y by Z). The rails and bearings required over 100...
By: schou

Continue Reading »]]>
Fri, 7 Sep 2012 20:52:40 PDT
The Anni Router 0.3 http://www.instructables.com/id/The-Anni-Router-03/
The Anni Router 0.3 - More DIY How To Projects]]> http://cdn.instructables.com/FKS/5OJG/H2WEXI90/FKS5OJGH2WEXI90.SQUARE2.jpg http://cdn.instructables.com/FKS/5OJG/H2WEXI90/FKS5OJGH2WEXI90.SQUARE.jpg http://cdn.instructables.com/FKS/5OJG/H2WEXI90/FKS5OJGH2WEXI90.SMALL.jpg sbenjamin The design is similar with the Anni Router 0.2. We change the wooden boards into HDPE boards, much nicer. Please check.
By: sbenjamin

Continue Reading »]]>
Mon, 11 Jun 2012 15:21:08 PDT
Make Your Own DIY CNC http://www.instructables.com/id/Make-Your-Own-DIY-CNC/
Make Your Own DIY CNC - More DIY How To Projects]]> http://cdn.instructables.com/FC7/HBLF/H0OJ0R1K/FC7HBLFH0OJ0R1K.SQUARE2.jpg http://cdn.instructables.com/FC7/HBLF/H0OJ0R1K/FC7HBLFH0OJ0R1K.SQUARE.jpg http://cdn.instructables.com/FC7/HBLF/H0OJ0R1K/FC7HBLFH0OJ0R1K.SMALL.jpg nick2334 This instructable outlines the assembly process of my 2nd generation CNC machine which I designed to be simple to build and quiet enough to be apartment friendly. I have included example projects that I have made in the first two weeks of using the machine to demonstrate its capabilities. This is t...
By: nick2334

Continue Reading »]]>
Thu, 26 Apr 2012 23:10:14 PDT
domo - large format cnc mill http://www.instructables.com/id/domo-large-format-cnc-mill/
domo - large format cnc mill - More DIY How To Projects]]> http://cdn.instructables.com/FWL/1256/H0OJ6X9Z/FWL1256H0OJ6X9Z.SQUARE2.jpg http://cdn.instructables.com/FWL/1256/H0OJ6X9Z/FWL1256H0OJ6X9Z.SQUARE.jpg http://cdn.instructables.com/FWL/1256/H0OJ6X9Z/FWL1256H0OJ6X9Z.SMALL.jpg forseral Domo is my cnc milling machine targeted at ease of construction while maintaining high rigidity.  I'm not a metal worker nor do i have the tools for this sort of precision.  Having stated such, I designed domo with the goal of using as many existing components as possible.  He's not yet 100% complet...
By: forseral

Continue Reading »]]>
Sat, 14 Apr 2012 11:27:36 PDT
How to make a woodcut from... a photo of a woodcut using your CNC mill http://www.instructables.com/id/How-to-make-a-woodcut-from-a-photo-of-a-woodcut/
How to make a woodcut from... a photo of a woodcut using your CNC mill - More DIY How To Projects]]> http://cdn.instructables.com/FFY/0QDQ/H0FLRO1E/FFY0QDQH0FLRO1E.SQUARE2.jpg http://cdn.instructables.com/FFY/0QDQ/H0FLRO1E/FFY0QDQH0FLRO1E.SQUARE.jpg http://cdn.instructables.com/FFY/0QDQ/H0FLRO1E/FFY0QDQH0FLRO1E.SMALL.jpg ccrome My dad was just visiting, and he asked me if I could use my new CNC router to make a woodcut.  That got me to thinking... sure, why not?   He sent me a photo of a woodcut hanging in my sister's house, and in a few hours I was able to make this woodcut!  Very neat.  Unfortunately, this instructabl...
By: ccrome

Continue Reading »]]>
Wed, 28 Mar 2012 10:11:48 PDT
Make an M.C. Escher Reptile puzzle on your CNC router/mill http://www.instructables.com/id/Make-an-MC-Escher-Reptile-puzzle-on-your-CNC-rou/
Make an M.C. Escher Reptile puzzle on your CNC router/mill - More DIY How To Projects]]> http://cdn.instructables.com/FDI/XN39/H01NA9RC/FDIXN39H01NA9RC.SQUARE2.jpg http://cdn.instructables.com/FDI/XN39/H01NA9RC/FDIXN39H01NA9RC.SQUARE.jpg http://cdn.instructables.com/FDI/XN39/H01NA9RC/FDIXN39H01NA9RC.SMALL.jpg ccrome So, you've just finished your CNC router/mill build, and you need something to make.  Try the hand bowl, which is extremely cool. For your next project, try this one.  I always had a fondness for the works of M. C. Escher, so i decided to make the reptiles out of wood. I started with a dxf from he...
By: ccrome

Continue Reading »]]>
Tue, 27 Mar 2012 23:42:17 PDT
DIY CNC Router http://www.instructables.com/id/DIY-CNC-Router/
DIY CNC Router - More DIY How To Projects]]> http://cdn.instructables.com/F1E/SORQ/GZ0BVNE3/F1ESORQGZ0BVNE3.SQUARE2.jpg http://cdn.instructables.com/F1E/SORQ/GZ0BVNE3/F1ESORQGZ0BVNE3.SQUARE.jpg http://cdn.instructables.com/F1E/SORQ/GZ0BVNE3/F1ESORQGZ0BVNE3.SMALL.jpg Doug Costlow If you have any interest in purchasing a kit version of this machine please click the above button and complete the form so that I can gauge the level of interest. This instructable will show you how to construct a CNC Router that will allow you to cut 3-D shapes out of wood, plastic and aluminum...
By: Doug Costlow

Continue Reading »]]>
Mon, 27 Feb 2012 22:45:38 PST
Homemade 2'x4' Wood CNC Router http://www.instructables.com/id/How-to-Make-a-Homemade-2x4-Wood-CNC-Router/
Homemade 2'x4' Wood CNC Router - More DIY How To Projects]]> http://cdn.instructables.com/FTC/0HDD/GYN8ZAIU/FTC0HDDGYN8ZAIU.SQUARE2.jpg http://cdn.instructables.com/FTC/0HDD/GYN8ZAIU/FTC0HDDGYN8ZAIU.SQUARE.jpg http://cdn.instructables.com/FTC/0HDD/GYN8ZAIU/FTC0HDDGYN8ZAIU.SMALL.jpg Kyles Woodworking Here I am going to show how I made my CNC (Computer Numerical Controlled) router. The table measures 24"x48" and the cutting envelope is about 19”x38.” I made this CNC when I was 17 and if you would like to see more on this CNC, visit my website at www.KylesWoodworking.com NOTICE: THE PLANS AND DES...
By: Kyles Woodworking

Continue Reading »]]>
Wed, 15 Feb 2012 17:01:15 PST
DIY MDF CNC Machine 36x22 http://www.instructables.com/id/DIY-CNC-Machine-36x22/
DIY MDF CNC Machine 36x22 - More DIY How To Projects]]> http://cdn.instructables.com/FUG/AKHB/GPBDFI4C/FUGAKHBGPBDFI4C.SQUARE2.jpg http://cdn.instructables.com/FUG/AKHB/GPBDFI4C/FUGAKHBGPBDFI4C.SQUARE.jpg http://cdn.instructables.com/FUG/AKHB/GPBDFI4C/FUGAKHBGPBDFI4C.SMALL.jpg Spiky1987 The design I'm gonna present is a DIY CNC machine made with MDF board. This design has been made by one of my friend and I have built one exactly like his. So we currently have 2 machines like this one. This is my first instructable so maybe there will be a couple of things missing, please feel fre...
By: Spiky1987

Continue Reading »]]>
Sun, 26 Jun 2011 13:13:42 PDT
Quick Dingbat Style Font 2 Graphic http://www.instructables.com/id/Quick-Dingbat-Style-Font-2-Graphic/
Quick Dingbat Style Font 2 Graphic - More DIY How To Projects]]> http://cdn.instructables.com/F6V/75FG/GMDS5HTT/F6V75FGGMDS5HTT.SQUARE2.jpg http://cdn.instructables.com/F6V/75FG/GMDS5HTT/F6V75FGGMDS5HTT.SQUARE.jpg http://cdn.instructables.com/F6V/75FG/GMDS5HTT/F6V75FGGMDS5HTT.SMALL.jpg daveand5 Cant find a graphic you need and would rather not pay for one, only to find out you have to rework it to make it work. Well here is a quick rescue. http://www.fontspace.com has many many free fonts, many of which are dingbat style (graphics). I was amazed at one that i downloaded, In ink-scape i con...
By: daveand5

Continue Reading »]]>
Mon, 11 Apr 2011 12:36:31 PDT
Axis Dust Cover for the CNC Mini Milling Machine http://www.instructables.com/id/Axis-Dust-Cover-for-the-CNC-Mini-Milling-Machine/
Axis Dust Cover for the CNC Mini Milling Machine - More DIY How To Projects]]> http://cdn.instructables.com/FDY/1ZRR/GLFU64Y7/FDY1ZRRGLFU64Y7.SQUARE2.jpg http://cdn.instructables.com/FDY/1ZRR/GLFU64Y7/FDY1ZRRGLFU64Y7.SQUARE.jpg http://cdn.instructables.com/FDY/1ZRR/GLFU64Y7/FDY1ZRRGLFU64Y7.SMALL.jpg Flying_MashedPotatoes After being on this site for quite some time, and using other people's tutorials, I thought that I should contribute something that could help many people. If this design doesn't work for your machine, you can always change it so that it WILL work. This is a neat way to protect the axis of your min...
By: Flying_MashedPotatoes

Continue Reading »]]>
Fri, 18 Mar 2011 14:08:32 PDT
Military Service Showcase http://www.instructables.com/id/Military-Service-Showcase/
Military Service Showcase - More DIY How To Projects]]> http://cdn.instructables.com/F47/31I7/GL4Z3XJN/F4731I7GL4Z3XJN.SQUARE2.jpg http://cdn.instructables.com/F47/31I7/GL4Z3XJN/F4731I7GL4Z3XJN.SQUARE.jpg http://cdn.instructables.com/F47/31I7/GL4Z3XJN/F4731I7GL4Z3XJN.SMALL.jpg daveand5 When I saw this contest My first thought was that if I won the laser unit I could build a very unique gift/veteran display that I have been wanting to build for a while. Its made of etched glass or acrylic with wood top and bottom and lights up with led's.   I'm putting my idea into sketch up, grab...
By: daveand5

Continue Reading »]]>
Fri, 11 Mar 2011 09:09:27 PST
easy cnc etching from artwork http://www.instructables.com/id/easy-cnc-etching-from-artwork/
easy cnc etching from artwork - More DIY How To Projects]]> http://cdn.instructables.com/F15/LSM3/GKS0SQTA/F15LSM3GKS0SQTA.SQUARE2.jpg http://cdn.instructables.com/F15/LSM3/GKS0SQTA/F15LSM3GKS0SQTA.SQUARE.jpg http://cdn.instructables.com/F15/LSM3/GKS0SQTA/F15LSM3GKS0SQTA.SMALL.jpg daveand5 i often need to convert artwork and pictures to line drawings for my router projects, so i'm gonna share the procedure I use. needed software is Gimp and the demo of Img2CAD. first locate a picture you want to use, recently I have been making Service Branch seals so im gonna use the Air Force seal ...
By: daveand5

Continue Reading »]]>
Tue, 8 Mar 2011 13:04:08 PST
Adhesive Tape Flat Belt http://www.instructables.com/id/Adhesive-Tape-Flat-Belt/
Adhesive Tape Flat Belt - More DIY How To Projects]]> http://cdn.instructables.com/F92/YOPJ/GGPET5QE/F92YOPJGGPET5QE.SQUARE2.jpg http://cdn.instructables.com/F92/YOPJ/GGPET5QE/F92YOPJGGPET5QE.SQUARE.jpg http://cdn.instructables.com/F92/YOPJ/GGPET5QE/F92YOPJGGPET5QE.SMALL.jpg jovolomo Hi, This summer I was building my first CNC ROUTER, and I got confronted to the following issue: I only have ONE stepper motor for X axis. But X axis is driven on both sides by a threaded rod and a nut. the need was : fast transmission, medium torque, and relative position kept. I first thought a...
By: jovolomo

Continue Reading »]]>
Sun, 21 Nov 2010 17:17:05 PST