Instructables: exploring - technology - leds - lamp http://www.instructables.com Tue, 2 Sep 2014 01:30:31 PDT BLOX v1.01 DIY LED Book Reading Lamp and Torch http://www.instructables.com/id/DIY-Book-Reading-Lamp-and-Torch/
DIY LED Book Reading Lamp and Torch - More DIY How To Projects]]> http://cdn.instructables.com/F2K/LDWT/HZIHCHSY/F2KLDWTHZIHCHSY.SQUARE2.jpg http://cdn.instructables.com/F2K/LDWT/HZIHCHSY/F2KLDWTHZIHCHSY.SQUARE.jpg http://cdn.instructables.com/F2K/LDWT/HZIHCHSY/F2KLDWTHZIHCHSY.SMALL.jpg TannyPB Hey everyone! In this instructable I'll show you how to make your own DIY Reading Lamp, that you can mount on the book you're reading. This lamp is handy if you want to read a book in a car or in the dark without disturbing anyone else. This lamp is bright enough to illuminate both pages of the book...
By: TannyPB

Continue Reading »]]>
Mon, 1 Sep 2014 01:47:03 PDT
Light up a LED with one AA-battery (in a solar lamp) http://www.instructables.com/id/Light-up-a-LED-with-one-AA-battery-in-a-solar-lamp/
Light up a LED with one AA-battery (in a solar lamp) - More DIY How To Projects]]> http://cdn.instructables.com/FSZ/IH5X/HZGTF7U9/FSZIH5XHZGTF7U9.SQUARE2.jpg http://cdn.instructables.com/FSZ/IH5X/HZGTF7U9/FSZIH5XHZGTF7U9.SQUARE.jpg http://cdn.instructables.com/FSZ/IH5X/HZGTF7U9/FSZIH5XHZGTF7U9.SMALL.jpg Tom_Toffi In my lastest project i want to build a little solar lamp. So i went to my local electronics distributor and want to buy i little solar cell. The solar cell has an output of 2V and the battery an maximum output of 1.2V, which is quite to low to drive any standard white LED. Sure there is an easy way...
By: Tom_Toffi

Continue Reading »]]>
Sat, 30 Aug 2014 16:03:48 PDT
IKEA Samtid mood-light upgrade http://www.instructables.com/id/IKEA-Samtid-mood-light-upgrade/
IKEA Samtid mood-light upgrade - More DIY How To Projects]]> http://cdn.instructables.com/FE3/BT49/HYY8JBBE/FE3BT49HYY8JBBE.SQUARE2.jpg http://cdn.instructables.com/FE3/BT49/HYY8JBBE/FE3BT49HYY8JBBE.SQUARE.jpg http://cdn.instructables.com/FE3/BT49/HYY8JBBE/FE3BT49HYY8JBBE.SMALL.jpg madworm Arduino compatible WS2812B-based RGB LED ring light that can easily be added to your IKEA Samtid lamp. Runs on 5V DC (2.75A). Get all design files on github. Lamp assembly First unplug the power cord.Remove the lamp shade by undoing the nut that clamps it down. If your lamp comes with a plastic d...
By: madworm

Continue Reading »]]>
Sun, 17 Aug 2014 06:57:17 PDT
ice light http://www.instructables.com/id/ice-light/
ice light - More DIY How To Projects]]> http://cdn.instructables.com/F8S/1VPZ/HXVR3UPN/F8S1VPZHXVR3UPN.SQUARE2.jpg http://cdn.instructables.com/F8S/1VPZ/HXVR3UPN/F8S1VPZHXVR3UPN.SQUARE.jpg http://cdn.instructables.com/F8S/1VPZ/HXVR3UPN/F8S1VPZHXVR3UPN.SMALL.jpg gruban it is simple project things we need 1.ice 2.led3.9v battery4.paper cup led connect LED with battery then make a hole on paper cup then place the LED final add some ice in paper cup to make the light
By: gruban

Continue Reading »]]>
Mon, 21 Jul 2014 09:03:07 PDT
IKEA Samtid reading light upgrade http://www.instructables.com/id/IKEA-Samtid-reading-light-upgrade/
IKEA Samtid reading light upgrade - More DIY How To Projects]]> http://cdn.instructables.com/FF2/L08S/HWQF1G25/FF2L08SHWQF1G25.SQUARE2.jpg http://cdn.instructables.com/FF2/L08S/HWQF1G25/FF2L08SHWQF1G25.SQUARE.jpg http://cdn.instructables.com/FF2/L08S/HWQF1G25/FF2L08SHWQF1G25.SMALL.jpg madworm After switching all my lamps to LED light bulbs, I was annoyed by the fact that most of these bulbs predominantly emit light into the forward hemisphere. Only very little light makes it into the opposite direction. To some degree this is ameliorated by the lamp's screen acting as a diffuser, but it'...
By: madworm

Continue Reading »]]>
Sat, 21 Jun 2014 17:59:46 PDT
Diffused Glue Stick Lamp http://www.instructables.com/id/Diffused-Glue-Stick-Lamp/
Diffused Glue Stick Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F82/733T/HWNUD1P0/F82733THWNUD1P0.SQUARE2.jpg http://cdn.instructables.com/F82/733T/HWNUD1P0/F82733THWNUD1P0.SQUARE.jpg http://cdn.instructables.com/F82/733T/HWNUD1P0/F82733THWNUD1P0.SMALL.jpg vishalapr Last week, I received the glue gun I ordered almost a month ago which I replaced with my older mini glue gun. The mini glue gun used thin glue sticks(7mm) whereas the new one I got used only normal sized glue sticks(10mm). So I had a whole bunch of these thin glue sticks left over, thought for a bit...
By: vishalapr

Continue Reading »]]>
Fri, 20 Jun 2014 20:51:32 PDT
Origami Paper Glowie http://www.instructables.com/id/Origami-Paper-Glowie/
Origami Paper Glowie - More DIY How To Projects]]> http://cdn.instructables.com/FWT/7XA8/HVPX6G83/FWT7XA8HVPX6G83.SQUARE2.jpg http://cdn.instructables.com/FWT/7XA8/HVPX6G83/FWT7XA8HVPX6G83.SQUARE.jpg http://cdn.instructables.com/FWT/7XA8/HVPX6G83/FWT7XA8HVPX6G83.SMALL.jpg cadebot The Origami Paper Glowie is a battery-powered lamp that looks clean and sharp. Its portability allows for it to be placed nearly anywhere around your home, and it is sure to appeal to you and your guests.Continue reading to learn how the lamp is made! Trim the Paper To construct the cube, I recom...
By: cadebot

Continue Reading »]]>
Tue, 27 May 2014 18:59:07 PDT
Enerjar 1: green power jar http://www.instructables.com/id/Enerjar-1-green-power-jar/
Enerjar 1: green power jar - More DIY How To Projects]]> http://cdn.instructables.com/FHM/T8IS/HVNXRVLS/FHMT8ISHVNXRVLS.SQUARE2.jpg http://cdn.instructables.com/FHM/T8IS/HVNXRVLS/FHMT8ISHVNXRVLS.SQUARE.jpg http://cdn.instructables.com/FHM/T8IS/HVNXRVLS/FHMT8ISHVNXRVLS.SMALL.jpg Makor The Green Electronics Challenge. A place to showcase skill and the ability to harness nature or another means of green power. When thinking of what my entry would be I thought, "Hmm, what is the best form of renewable green energy?" And it literally hit me like a hot-flash, "The Sun!" The sun is ama...
By: Makor

Continue Reading »]]>
Mon, 26 May 2014 11:14:31 PDT
DIY LED Glow Cubes (Accent Lighting & Night Lamp) http://www.instructables.com/id/DIY-LED-Glow-Blocks/
DIY LED Glow Cubes (Accent Lighting & Night Lamp) - More DIY How To Projects]]> http://cdn.instructables.com/FR6/5Z34/H9G12NSF/FR65Z34H9G12NSF.SQUARE2.jpg http://cdn.instructables.com/FR6/5Z34/H9G12NSF/FR65Z34H9G12NSF.SQUARE.jpg http://cdn.instructables.com/FR6/5Z34/H9G12NSF/FR65Z34H9G12NSF.SMALL.jpg bhvm I love LEDs~! People who have been following me know this very well. Now here's a New one for you. LED GLOW BLOCKS! LED Glow blocks are a neat way to accentuate your Posh Living room, Add a fill to your Existing Lights, for use as a Elaborate and artistic Night lamp or a cool and Diffused light sou...
By: bhvm

Continue Reading »]]>
Tue, 13 May 2014 21:24:15 PDT
Mini Lamp http://www.instructables.com/id/Mini-Lamp-2/
Mini Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FCB/AO6Z/HUYM50PO/FCBAO6ZHUYM50PO.SQUARE2.jpg http://cdn.instructables.com/FCB/AO6Z/HUYM50PO/FCBAO6ZHUYM50PO.SQUARE.jpg http://cdn.instructables.com/FCB/AO6Z/HUYM50PO/FCBAO6ZHUYM50PO.SMALL.jpg alilovic007 This lamp is very easy to make. Just follow the steps. Material MaterialThese small LEDs can buy on eBay. Blue circle serves as a mounting base for a lamp.The green wire is the carrier of LEDs.For this job you need about 10 minutes How to make a lamp First you need to roll the wire as in the s...
By: alilovic007

Continue Reading »]]>
Sun, 11 May 2014 13:20:50 PDT
Flower Lamps (Barbara + Peter) http://www.instructables.com/id/Flower-Lamps-Barbara-Peter/
Flower Lamps (Barbara + Peter) - More DIY How To Projects]]> http://cdn.instructables.com/F3O/T37X/HERLZTJ8/F3OT37XHERLZTJ8.SQUARE2.jpg http://cdn.instructables.com/F3O/T37X/HERLZTJ8/F3OT37XHERLZTJ8.SQUARE.jpg http://cdn.instructables.com/F3O/T37X/HERLZTJ8/F3OT37XHERLZTJ8.SMALL.jpg SHS_PnE It would be nice to have one of these sitting by your night stand. The flowers and vase hide the wires connecting the LEDs. Materials 2 sheets of purple origami paper 1 wire of solder 1 soldering iron 1 soldering stand 4 green LEDs 4 yellow LEDs 2 strands of black and red wire 1 ipod charger 16...
By: SHS_PnE

Continue Reading »]]>
Thu, 1 May 2014 17:38:03 PDT
Louis and Alex's LED Lamp http://www.instructables.com/id/Louis-and-Alexs-LED-Lamp/
Louis and Alex's LED Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FKE/IASM/HF23K6R8/FKEIASMHF23K6R8.SQUARE2.jpg http://cdn.instructables.com/FKE/IASM/HF23K6R8/FKEIASMHF23K6R8.SQUARE.jpg http://cdn.instructables.com/FKE/IASM/HF23K6R8/FKEIASMHF23K6R8.SMALL.jpg SHS_PnE STEP 1: Gather your materials 2 x CD's 6 x LED's 1 x 12 inch 1' diameter pvc pipe 1 x XYZ PVC connector 2 x 90 degree PVC elbows 6 x LED resistors 1 x USB connector 1 x sauter 1 x sautering iron/kit wire for circuit 1 x drill Gather Materials STEP 1: Gather your materials 2 x CD's 6 x LED's 1 x 1...
By: SHS_PnE

Continue Reading »]]>
Thu, 1 May 2014 17:37:43 PDT
Led Milkshake Hat Lamp http://www.instructables.com/id/Led-Milkshake-Hat-Lamp/
Led Milkshake Hat Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FCZ/9YOA/HEXSGXD2/FCZ9YOAHEXSGXD2.SQUARE2.jpg http://cdn.instructables.com/FCZ/9YOA/HEXSGXD2/FCZ9YOAHEXSGXD2.SQUARE.jpg http://cdn.instructables.com/FCZ/9YOA/HEXSGXD2/FCZ9YOAHEXSGXD2.SMALL.jpg SHS_PnE Materials List: 1 Hat 1 iPod Charger with cord and wall adapter 3  1/2 inch PVC T joint 1 foot 1/2 PVC pipe 1 wooden disc 6 colored LED's 6 100 ohm resistors solder 2 feet red and black insulated wire wire strippers hot glue electrical tape soldering iron  wire cutters pliers  sponge Step 1 Ge...
By: SHS_PnE

Continue Reading »]]>
Thu, 1 May 2014 17:36:32 PDT
RGB LED Film Strip Lamp http://www.instructables.com/id/RGB-LED-Film-Strip-Lamp/
RGB LED Film Strip Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FES/M38Q/HUM7D27Z/FESM38QHUM7D27Z.SQUARE2.jpg http://cdn.instructables.com/FES/M38Q/HUM7D27Z/FESM38QHUM7D27Z.SQUARE.jpg http://cdn.instructables.com/FES/M38Q/HUM7D27Z/FESM38QHUM7D27Z.SMALL.jpg pjakowetz I saw a filmstrip lamp on imgur a while ago, and was pretty keen to recreate it.... but with a twist. I had recently brought some cheap LED 5050 tape from china, so thought it was an ideal time to hack something together. This is definitely just a prototype, and will be creating v2 in the near futur...
By: pjakowetz

Continue Reading »]]>
Wed, 30 Apr 2014 03:35:59 PDT
Mini Reader's Lamp http://www.instructables.com/id/Mini-Readers-Lamp/
Mini Reader's Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F9P/QXP2/HTVIEYTW/F9PQXP2HTVIEYTW.SQUARE2.jpg http://cdn.instructables.com/F9P/QXP2/HTVIEYTW/F9PQXP2HTVIEYTW.SQUARE.jpg http://cdn.instructables.com/F9P/QXP2/HTVIEYTW/F9PQXP2HTVIEYTW.SMALL.jpg Ayush Sharma Hi Everybody, Did you Ever Whished a Lamp which is about only 7cm Long and 5cm width? In this instructable you will be seeing a lamp which was made from a childhood 4$ game and some LED's.   Get the Parts.... 1. Mechanix Kids Engineering Game 2. (1) 3W Cool White led (without base - ...
By: Ayush Sharma

Continue Reading »]]>
Mon, 28 Apr 2014 02:50:08 PDT
Electrical Tape LED! http://www.instructables.com/id/Electrical-Tape-LED/
Electrical Tape LED! - More DIY How To Projects]]> http://cdn.instructables.com/F9D/H3LT/HTZ3FISS/F9DH3LTHTZ3FISS.SQUARE2.jpg http://cdn.instructables.com/F9D/H3LT/HTZ3FISS/F9DH3LTHTZ3FISS.SQUARE.jpg http://cdn.instructables.com/F9D/H3LT/HTZ3FISS/F9DH3LTHTZ3FISS.SMALL.jpg pandyaketan Another waste to best lamp light.... This is just a variation to give ideas on enormous possibilities and potential. If you are environmentally conscious, you will find it aesthetically beautiful also! -------------------------------------------------------- "May the good belong to all the people ...
By: pandyaketan

Continue Reading »]]>
Mon, 14 Apr 2014 00:59:41 PDT
Pet Coke Bottle LED Light http://www.instructables.com/id/Pet-Coke-Bottle-LED-Light/
Pet Coke Bottle LED Light - More DIY How To Projects]]> http://cdn.instructables.com/FKT/7KPV/HTZ3F4EV/FKT7KPVHTZ3F4EV.SQUARE2.jpg http://cdn.instructables.com/FKT/7KPV/HTZ3F4EV/FKT7KPVHTZ3F4EV.SQUARE.jpg http://cdn.instructables.com/FKT/7KPV/HTZ3F4EV/FKT7KPVHTZ3F4EV.SMALL.jpg pandyaketan Waste to best. If you are environmentally conscious, you will find it aesthetically beautiful also! Parts required: Parts required: 1. Empty pet coke bottle (Make a vertical slit to insert the led circuit in the bottle). Mine is half litre one.  2. Four / 6/8 or ten leds 3. If your country has...
By: pandyaketan

Continue Reading »]]>
Sun, 13 Apr 2014 23:21:25 PDT
DIY: Amazing Jar Lantern http://www.instructables.com/id/DIY-Amazing-Jar-Lantern/ http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SQUARE2.jpg http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SQUARE.jpg http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SMALL.jpg macobt Jar Lantern that run on battery,inside there is one White Led Diode,2 AAA bateries and on  lid there is handle and switch. Join to American Hacker:http://www.youtube.com/subscription_center?add_user=macobt
By: macobt

Continue Reading »]]>
Sat, 15 Feb 2014 14:35:45 PST
Vase of ice and fire http://www.instructables.com/id/Vase-of-ice-and-fire/
Vase of ice and fire - More DIY How To Projects]]> http://cdn.instructables.com/F3P/3R2K/HRI92LIW/F3P3R2KHRI92LIW.SQUARE2.jpg http://cdn.instructables.com/F3P/3R2K/HRI92LIW/F3P3R2KHRI92LIW.SQUARE.jpg http://cdn.instructables.com/F3P/3R2K/HRI92LIW/F3P3R2KHRI92LIW.SMALL.jpg Ginko Balboa Make functional vase using vitrage (glazing) technique with embedded LEDs. The vase can be filled with water and used as a regular flower vase, also LEDs can be light up when placed on the stand. The vase can shine in one of two possible colors, switching colors only by rotating the vase on the st...
By: Ginko Balboa

Continue Reading »]]>
Mon, 10 Feb 2014 16:29:41 PST
Lamp with bulb http://www.instructables.com/id/Lamp-with-bulb/
Lamp with bulb - More DIY How To Projects]]> http://cdn.instructables.com/FJS/A3WP/HRBE3WXP/FJSA3WPHRBE3WXP.SQUARE2.jpg http://cdn.instructables.com/FJS/A3WP/HRBE3WXP/FJSA3WPHRBE3WXP.SQUARE.jpg http://cdn.instructables.com/FJS/A3WP/HRBE3WXP/FJSA3WPHRBE3WXP.SMALL.jpg Tezeusz I apologize for the pictures, I never thought I'd put on Instructables this article.For more projects like the facebook page! Container Recycling dose of a deodorant or air wick.First i wanted to use deodorant container, but we found that no balance, you'll see why, so I used the air wick contain...
By: Tezeusz

Continue Reading »]]>
Fri, 7 Feb 2014 12:21:46 PST
24 Watt LED Lamp. http://www.instructables.com/id/24-Watt-LED-Lamp/
24 Watt LED Lamp. - More DIY How To Projects]]> http://cdn.instructables.com/F3D/JKFO/HOHYD1CB/F3DJKFOHOHYD1CB.SQUARE2.jpg http://cdn.instructables.com/F3D/JKFO/HOHYD1CB/F3DJKFOHOHYD1CB.SQUARE.jpg http://cdn.instructables.com/F3D/JKFO/HOHYD1CB/F3DJKFOHOHYD1CB.SMALL.jpg Dipankar This high power LED lamp is made out of a discarded PVC pipe of 110 mm diameter. I have used 24 numbers of 1 watt LED’s which gives a powerful light, and is very good for lighting up your work table when you require more light to do some intricate work. Parts you will need. 1. AC Transf...
By: Dipankar

Continue Reading »]]>
Sun, 1 Dec 2013 03:29:31 PST
Solar powered window lamp http://www.instructables.com/id/Solar-powered-window-lamp/
Solar powered window lamp - More DIY How To Projects]]> http://cdn.instructables.com/FDQ/LAXT/HO7XG0H0/FDQLAXTHO7XG0H0.SQUARE2.jpg http://cdn.instructables.com/FDQ/LAXT/HO7XG0H0/FDQLAXTHO7XG0H0.SQUARE.jpg http://cdn.instructables.com/FDQ/LAXT/HO7XG0H0/FDQLAXTHO7XG0H0.SMALL.jpg molarin I have a window in my house without electricity where I wanted a window lamp. I've been searching for a solar powered lamp but I couldn't find anyone that suited for the right price so I descided to build my own. Here is what you need: Solar powered garden lamps x 3 Nipper Electric tape Soldering t...
By: molarin

Continue Reading »]]>
Tue, 26 Nov 2013 04:36:23 PST
Patron led hanging patio lights http://www.instructables.com/id/Patron-led-hanging-patio-lights/ http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SQUARE2.jpg http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SQUARE.jpg http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SMALL.jpg ARGMISTER After doing some researching and reading on some ideas for lights for my backyard patio I came across this instructable.,..  http://www.instructables.com/id/Stylish-Half-bottle-LED-Lights/ ....well it sparked an idea and I remembered I had access to alot of patron bottles..empty already. Got a pr...
By: ARGMISTER

Continue Reading »]]>
Sun, 24 Nov 2013 18:10:20 PST
Malibu bottle lamp! http://www.instructables.com/id/Malibu-bottle-lamp/
Malibu bottle lamp! - More DIY How To Projects]]> http://cdn.instructables.com/F8K/PFCR/HO7XCO24/F8KPFCRHO7XCO24.SQUARE2.jpg http://cdn.instructables.com/F8K/PFCR/HO7XCO24/F8KPFCRHO7XCO24.SQUARE.jpg http://cdn.instructables.com/F8K/PFCR/HO7XCO24/F8KPFCRHO7XCO24.SMALL.jpg ThatKid07 This is my first instructable, so it is pretty straightforward and easy to make! I finished mine in an afternoon!                                                   *EDIT* I have entered this into the make it glow contest, so if you like it don't forget to vote!* You will need: .A funky bottle .a ...
By: ThatKid07

Continue Reading »]]>
Thu, 21 Nov 2013 10:38:45 PST
High Power RGB LED Moodlamp which syncs with Philips Hue http://www.instructables.com/id/High-Power-RGB-LED-Moodlamp-which-syncs-with-Phili/
High Power RGB LED Moodlamp which syncs with Philips Hue - More DIY How To Projects]]> http://cdn.instructables.com/F39/DU4J/HNUEZAL2/F39DU4JHNUEZAL2.SQUARE2.jpg http://cdn.instructables.com/F39/DU4J/HNUEZAL2/F39DU4JHNUEZAL2.SQUARE.jpg http://cdn.instructables.com/F39/DU4J/HNUEZAL2/F39DU4JHNUEZAL2.SMALL.jpg andstdout In this instructable the main focus lies on the software which I've created - not so much on the hardware side. You needn't to use a high- power led for this, you can use every RGB- LED you like. The "High Power RGB LED Moodlamp" is a high power rgb led lamp which can be controlled via http comma...
By: andstdout

Continue Reading »]]>
Tue, 12 Nov 2013 12:24:36 PST
Ultrabright LED Emergency Lamp (Rechargeable!) http://www.instructables.com/id/Ultrabright-LED-Emergency-Lamp/
Ultrabright LED Emergency Lamp (Rechargeable!) - More DIY How To Projects]]> http://cdn.instructables.com/FF7/CNYF/HNRHW0WN/FF7CNYFHNRHW0WN.SQUARE2.jpg http://cdn.instructables.com/FF7/CNYF/HNRHW0WN/FF7CNYFHNRHW0WN.SQUARE.jpg http://cdn.instructables.com/FF7/CNYF/HNRHW0WN/FF7CNYFHNRHW0WN.SMALL.jpg ASCAS Preparing for a calamity or planning to go camping in the vast wilderness? Make an ultrabright emergency light in less than 5 minutes! It glows 360° and is completely WATERPROOF!. In addition the jar's lid can be detached from the jar turning it into a compact flashlight! This is a simple project th...
By: ASCAS

Continue Reading »]]>
Fri, 8 Nov 2013 19:03:37 PST
Water Lamp http://www.instructables.com/id/Water-Lamp/
Water Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FYC/XJ2G/HN82KMJU/FYCXJ2GHN82KMJU.SQUARE2.jpg http://cdn.instructables.com/FYC/XJ2G/HN82KMJU/FYCXJ2GHN82KMJU.SQUARE.jpg http://cdn.instructables.com/FYC/XJ2G/HN82KMJU/FYCXJ2GHN82KMJU.SMALL.jpg amriorda Do you like light?  How about water?  Cheap things to make?  Well I have a project that is kinda cool if you can do it right.  And I did it, so you shouldn't have a problem. Materials The materials for this is a bit long, but most of them are really easy to acquire. -Tape -Scissors -Hearing Aid ...
By: amriorda

Continue Reading »]]>
Mon, 28 Oct 2013 21:06:39 PDT
LED Night Lamp http://www.instructables.com/id/LED-Night-Lamp/
LED Night Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FC1/QVML/HM8DDKEE/FC1QVMLHM8DDKEE.SQUARE2.jpg http://cdn.instructables.com/FC1/QVML/HM8DDKEE/FC1QVMLHM8DDKEE.SQUARE.jpg http://cdn.instructables.com/FC1/QVML/HM8DDKEE/FC1QVMLHM8DDKEE.SMALL.jpg mahadevrm Here is cheapest  LED Night Lamp less than 1 $  using old un used mobile  (my lost mobile) charger. Step 1. Materials 1.Old mobile charger (5v  300 ma) - Free existing un used 2.Power LED 1 Watt  with heat sink -  Rs. 10  (0.16 $) 3.Resistance 10 Ohm  1 watt or higher depends on charger rating...
By: mahadevrm

Continue Reading »]]>
Mon, 7 Oct 2013 01:30:25 PDT
Dark Activated Film Canister Night Light http://www.instructables.com/id/Dark-Activated-Film-Canister-Night-Light/
Dark Activated Film Canister Night Light - More DIY How To Projects]]> http://cdn.instructables.com/FDL/3G1V/HLSH5IF7/FDL3G1VHLSH5IF7.SQUARE2.jpg http://cdn.instructables.com/FDL/3G1V/HLSH5IF7/FDL3G1VHLSH5IF7.SQUARE.jpg http://cdn.instructables.com/FDL/3G1V/HLSH5IF7/FDL3G1VHLSH5IF7.SMALL.jpg Cats Science Club A light that turns on in the dark! Not as hard as it looks. We are beginners and if we could do it you could too. We liked the mini-mood lighting and the flashlights we made but wanted to try something else. Cool Cat has several film canister flashlights in his room and a mini mood light but he for...
By: Cats Science Club

Continue Reading »]]>
Mon, 23 Sep 2013 04:29:03 PDT
Rainbow Jar - RGB Pixel Strip Controlled via Arduino http://www.instructables.com/id/Rainbow-Jar-RGB-Pixel-Strip-Controlled-via-Ardui/
Rainbow Jar - RGB Pixel Strip Controlled via Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FEP/PL6S/HJKC5UT2/FEPPL6SHJKC5UT2.SQUARE2.jpg http://cdn.instructables.com/FEP/PL6S/HJKC5UT2/FEPPL6SHJKC5UT2.SQUARE.jpg http://cdn.instructables.com/FEP/PL6S/HJKC5UT2/FEPPL6SHJKC5UT2.SMALL.jpg phenoptix Our most popular item on our display at Maker Faires is always the Rainbow Jar. One customer has already replicated it so we thought we'd share how we made it so you can make your own! https://vine.co/v/hqxpVgdFQ9z (tried embedding this vine but it breaks instructables!) Getting Started - What ...
By: phenoptix

Continue Reading »]]>
Fri, 2 Aug 2013 06:23:13 PDT
Tabletop LED Lamp http://www.instructables.com/id/Tabletop-LED-Lamp/
Tabletop LED Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FVF/BNDV/HJAHP8VE/FVFBNDVHJAHP8VE.SQUARE2.jpg http://cdn.instructables.com/FVF/BNDV/HJAHP8VE/FVFBNDVHJAHP8VE.SQUARE.jpg http://cdn.instructables.com/FVF/BNDV/HJAHP8VE/FVFBNDVHJAHP8VE.SMALL.jpg RS Industries Ever feel bored or stressed out at the office or at home? Then build this simple electronic Tabletop LED Lamp. Just press the button and watch the lamp light up and turn off again. I am told that it is very effective, i personally have not tried it yet. Ultra bright LED - I got mine in bulk from ...
By: RS Industries

Continue Reading »]]>
Tue, 23 Jul 2013 09:46:34 PDT
How to make the Ring Lamp http://www.instructables.com/id/How-to-make-the-Ring-Lamp/
How to make the Ring Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SQUARE2.jpg http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SQUARE.jpg http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SMALL.jpg Alex Jalland This is an Instructable for a LED Lamp that I made using resin, wood and home-made circuitry. I hope you enjoy it, here is a link to my other Instructables: http://www.instructables.com/member/Alex+Jalland/  Here is the list of things you will need: 40x LED's of your choice(i used straw hat) ...
By: Alex Jalland

Continue Reading »]]>
Mon, 15 Jul 2013 09:46:13 PDT
LED Desklamp Conversion http://www.instructables.com/id/LED-Desklamp-Conversion/
LED Desklamp Conversion - More DIY How To Projects]]> http://cdn.instructables.com/F4B/UAGN/HIWDJTJP/F4BUAGNHIWDJTJP.SQUARE2.jpg http://cdn.instructables.com/F4B/UAGN/HIWDJTJP/F4BUAGNHIWDJTJP.SQUARE.jpg http://cdn.instructables.com/F4B/UAGN/HIWDJTJP/F4BUAGNHIWDJTJP.SMALL.jpg Hakimi While clearing my store, i found  my old desk lamp, non working desk lamp. Despite repairing, i rather convert it to LED which is better brightness and energy efficient too. Disassemble the lamp The parts of desk lamp when dismantled.  PCB Design and Stickering techniques The circuit and LED...
By: Hakimi

Continue Reading »]]>
Sat, 13 Jul 2013 10:41:04 PDT
O-Lamp http://www.instructables.com/id/O-Lamp/ http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SQUARE2.jpg http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SQUARE.jpg http://cdn.instructables.com/FOR/9IPO/HINO59MV/FOR9IPOHINO59MV.SMALL.jpg Alex Jalland
By: Alex Jalland

Continue Reading »]]>
Wed, 3 Jul 2013 11:15:23 PDT
12V Sleeping Lamp http://www.instructables.com/id/12V-Sleeping-Lamp/ http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SQUARE2.jpg http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SQUARE.jpg http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SMALL.jpg ardmatrik Made of: 1. 1W smd 3.7V Cool White LED 2. Wire 3. Plastic vase 4. Hot Cup - white/fog color 5. PVC pipe 6. Slide switch Support Material & Tools: 1. Super glue/5minute 1 tonne hardex 2. Cutter 3. Mini project saw 4. Driller Mine the power supply is from 12V solar system. Total power ~4Watt
By: ardmatrik

Continue Reading »]]>
Sat, 25 May 2013 17:10:46 PDT
LED Table Lamp - Acrylic Version. I made this at TechShop http://www.instructables.com/id/LED-Table-Lamp-Acrylic-Version-I-made-this-at-/ http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SQUARE2.jpg http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SQUARE.jpg http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SMALL.jpg John_TS_DTW Background:         The 3D Printed version of this LED Table Lamp.took a while to make.  The machine time also takes longer and the material cost is also higher.  The battery bracket need to be designed sturdier.            If we take a close look at this part, we could visualize it is primarily lay...
By: John_TS_DTW

Continue Reading »]]>
Fri, 3 May 2013 00:41:20 PDT
Mini LED Table Lamp Kit. Cable-free. Solder-free. I made it at TechShop. http://www.instructables.com/id/Mini-Table-Lamp-Kit-I-made-in-TechShop/ http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SQUARE2.jpg http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SQUARE.jpg http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SMALL.jpg John_TS_DTW Goals:       To make a mini portable LED table lamp kit.      To design Plug and Play device.  User just plug in 6 LEDs and 6 batteries.      To learn how to use Autodesk Inventor Professional and Maker Bot - Replicator 2      To have fun working and learning at the TechShop. Procedure:   * Create ...
By: John_TS_DTW

Continue Reading »]]>
Thu, 18 Apr 2013 18:23:14 PDT
meta lamp - portrait of a lamp is a 2000 lumen led lamp http://www.instructables.com/id/meta-lamp-portrait-of-a-lamp-is-a-2000-lumen-led/
meta lamp - portrait of a lamp is a 2000 lumen led lamp - More DIY How To Projects]]> http://cdn.instructables.com/FI1/11NX/HFD173EB/FI111NXHFD173EB.SQUARE2.jpg http://cdn.instructables.com/FI1/11NX/HFD173EB/FI111NXHFD173EB.SQUARE.jpg http://cdn.instructables.com/FI1/11NX/HFD173EB/FI111NXHFD173EB.SMALL.jpg pobriant For over a century the shape of our lighting has been defined by the shape of a glass bulb.  No more.  High power leds the size of a grain of sand are on the horizon and the only limits to lighting is our imagination. And if it is still not quite practical to have our walls light up, at least art s...
By: pobriant

Continue Reading »]]>
Sat, 13 Apr 2013 16:00:10 PDT
Study LED Lamp http://www.instructables.com/id/Study-LED-Lamp/
Study LED Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F9Y/79L1/HFD1JIQ5/F9Y79L1HFD1JIQ5.SQUARE2.jpg http://cdn.instructables.com/F9Y/79L1/HFD1JIQ5/F9Y79L1HFD1JIQ5.SQUARE.jpg http://cdn.instructables.com/F9Y/79L1/HFD1JIQ5/F9Y79L1HFD1JIQ5.SMALL.jpg SHS_PnE Materials/Tools: 2 inch PVC Soldering iron + solder Electrical Tape Drill and variety large drill bit( The larger the better depending of the PVC size) USB Charger( Ipod chargers work) Wire Stripper LED lights Wire Cutters Heat Gun Use of a sink  1-4 PVC Adapter (See Picture) Wire Resistors Ammeter...
By: SHS_PnE

Continue Reading »]]>
Thu, 11 Apr 2013 17:14:36 PDT
Multi-Color LED Lamp Utilizing an 8 Channel LED Controller v.3 http://www.instructables.com/id/Multi-Color-LED-Lamp-Utilizing-an-8-Channel-LED-Co/
Multi-Color LED Lamp Utilizing an 8 Channel LED Controller v.3 - More DIY How To Projects]]> http://cdn.instructables.com/F1V/J226/HFBKEMHE/F1VJ226HFBKEMHE.SQUARE2.jpg http://cdn.instructables.com/F1V/J226/HFBKEMHE/F1VJ226HFBKEMHE.SQUARE.jpg http://cdn.instructables.com/F1V/J226/HFBKEMHE/F1VJ226HFBKEMHE.SMALL.jpg ChromationSystems I wanted to experiment with using different color LEDs, other than the standard RGB, to create multi-color effects in a functional lamp. This lamp uses Cyan, Magenta, Yellow, Purple, Aqua-Green, and Blue 5mm LEDs along with an upper and lower White 12v LED strip. Each of the colors and upper/lower ...
By: ChromationSystems

Continue Reading »]]>
Thu, 11 Apr 2013 12:01:34 PDT
Calvin And Drew LED Lamp http://www.instructables.com/id/Calvin-And-Drew-LED-Lamp/
Calvin And Drew LED Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F0K/M73Q/HF23XMWT/F0KM73QHF23XMWT.SQUARE2.jpg http://cdn.instructables.com/F0K/M73Q/HF23XMWT/F0KM73QHF23XMWT.SQUARE.jpg http://cdn.instructables.com/F0K/M73Q/HF23XMWT/F0KM73QHF23XMWT.SMALL.jpg SHS_PnE Materials:  4 inch PVC coupling 2 in PVC Gaiting gun connector 3/4 in PVC pipe 22 LED Diodes  1/4 in plywood Wire 2 paper clip  1 Motor USB power adapter  Solder  Electric tape soldering iron Step 1: The Circuit - Cut out a circular piece of plywood that measures 2 1/8 in in diameter - Drill 1 ...
By: SHS_PnE

Continue Reading »]]>
Tue, 9 Apr 2013 07:16:09 PDT
USB Powered Custom Logo Light http://www.instructables.com/id/USB-Powered-Custom-Logo-Light/
USB Powered Custom Logo Light - More DIY How To Projects]]> http://cdn.instructables.com/F4N/JNWC/HF23WDAP/F4NJNWCHF23WDAP.SQUARE2.jpg http://cdn.instructables.com/F4N/JNWC/HF23WDAP/F4NJNWCHF23WDAP.SQUARE.jpg http://cdn.instructables.com/F4N/JNWC/HF23WDAP/F4NJNWCHF23WDAP.SMALL.jpg zagzero This is submitted in the Make to Learn Youth Contest, and it requires me to add questions and answers. Here are the questions: 1 - What did you make? 2 - How did you make it? 3 - Where did you make it? 4 - What did you learn? Answer to all four questions: I like using LEDs to light up things, but ...
By: zagzero

Continue Reading »]]>
Mon, 8 Apr 2013 14:17:24 PDT
The Prospector 5000 http://www.instructables.com/id/The-Prospector-5000/ http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SQUARE2.jpg http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SQUARE.jpg http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SMALL.jpg GhoustDoggy Howdy ho miners If you have ever mine in the dark  dont fear the new Ghoustdoggy's product will save the day.This  is 3.7 volt LED lamp for mining and exploration off unknown areas and places.It can be recharged by solar or reserved batterys.It can ligt for 2.5 hours .And good luck miners.
By: GhoustDoggy

Continue Reading »]]>
Sun, 7 Apr 2013 05:51:42 PDT
LED PVC Chair w/ reading light http://www.instructables.com/id/LED-PVC-Chair-w-reading-light/
LED PVC Chair w/ reading light - More DIY How To Projects]]> http://cdn.instructables.com/F1F/MBQW/HEXSSB2R/F1FMBQWHEXSSB2R.SQUARE2.jpg http://cdn.instructables.com/F1F/MBQW/HEXSSB2R/F1FMBQWHEXSSB2R.SQUARE.jpg http://cdn.instructables.com/F1F/MBQW/HEXSSB2R/F1FMBQWHEXSSB2R.SMALL.jpg SHS_PnE With minimal material requirements, you can turn your homemade PVC chair into a comfortable reading space- even if it's in a dark room! By attaching LED lights to a simple everyday CD, you can read at all hours of the night.  YOU WILL NEED: - 2 CDs (preferably unused) - 9 LED lights (color accordin...
By: SHS_PnE

Continue Reading »]]>
Fri, 5 Apr 2013 05:25:13 PDT
Robert and Tylers USB CD Lamp http://www.instructables.com/id/USB-CD-Lamp/
Robert and Tylers USB CD Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FQ3/6EMH/HF23W9ZJ/FQ36EMHHF23W9ZJ.SQUARE2.jpg http://cdn.instructables.com/FQ3/6EMH/HF23W9ZJ/FQ36EMHHF23W9ZJ.SQUARE.jpg http://cdn.instructables.com/FQ3/6EMH/HF23W9ZJ/FQ36EMHHF23W9ZJ.SMALL.jpg SHS_PnE FIrst to build this lamp you must have  A soldering iron wire cutters and strippers 5 blue LEDS a spool of red wire a spool of black wire  a few inches of this wire some duct tape 5 200 ohm resistors 2 cds and a USB Cable you are willing to cut up. also another helpful tool but one doesn't need this...
By: SHS_PnE

Continue Reading »]]>
Wed, 3 Apr 2013 06:53:56 PDT
CD Lamp http://www.instructables.com/id/CD-Lamp-1/ http://cdn.instructables.com/FGK/OWIG/HEXSGOCP/FGKOWIGHEXSGOCP.SQUARE2.jpg http://cdn.instructables.com/FGK/OWIG/HEXSGOCP/FGKOWIGHEXSGOCP.SQUARE.jpg http://cdn.instructables.com/FGK/OWIG/HEXSGOCP/FGKOWIGHEXSGOCP.SMALL.jpg SHS_PnE Procedure Step 1: Gather materials- 4 CDs, 6 LED's (your choice of color), USB, 12 120 ohm resistors, 2 positive wires (15 inches), 2 negative wires (15 inches), wire cutter/stripper, soldering iron, pliers, drill, hot glue, hot glue gun, and electrical tape. Step 2: Resistor set up- Put the resis...
By: SHS_PnE

Continue Reading »]]>
Tue, 2 Apr 2013 07:55:47 PDT
Rum Bottle LED Lamp http://www.instructables.com/id/Rum-Bottle-LED-Lamp/
Rum Bottle LED Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FFK/20YN/HEXSS2AF/FFK20YNHEXSS2AF.SQUARE2.jpg http://cdn.instructables.com/FFK/20YN/HEXSS2AF/FFK20YNHEXSS2AF.SQUARE.jpg http://cdn.instructables.com/FFK/20YN/HEXSS2AF/FFK20YNHEXSS2AF.SMALL.jpg oroman2014 This color changing light is simple to make, fairly cheap and acts a perfect desk decoration to plug into your computer or wall! It's simplistic, yet beautiful with its multiple colors.  Materials 1 Rum bottle 12 LEDS:   - 1 white  - 1 blue  - 1 green  - 1 yellow  - 1 orange  - 1 pink  - 6 color ...
By: oroman2014

Continue Reading »]]>
Sun, 31 Mar 2013 19:44:17 PDT
LED USB Sturdy Desk Lamp http://www.instructables.com/id/LED-USB-Sturdy-Desk-Lamp/
LED USB Sturdy Desk Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F6A/LNVK/HEI4LX6M/F6ALNVKHEI4LX6M.SQUARE2.jpg http://cdn.instructables.com/F6A/LNVK/HEI4LX6M/F6ALNVKHEI4LX6M.SQUARE.jpg http://cdn.instructables.com/F6A/LNVK/HEI4LX6M/F6ALNVKHEI4LX6M.SMALL.jpg SHS_PnE The USB powered lamp can be used anywhere as long as you carry a laptop or a USB adapter. This lamp is very simple to make if you have extra PVC parts. Materials: 5- LEDs (any color you want, we used green) 1- USB Cable (used Apple USB cord, cut iPhone connector off) Wires Solder 1- 5" 1 inch PVC 1...
By: SHS_PnE

Continue Reading »]]>
Thu, 21 Mar 2013 07:07:27 PDT
LED CD Lamp CMH http://www.instructables.com/id/LED-CD-Lamp-CMH/
LED CD Lamp CMH - More DIY How To Projects]]> http://cdn.instructables.com/FB8/IC9C/HEBMZHNY/FB8IC9CHEBMZHNY.SQUARE2.jpg http://cdn.instructables.com/FB8/IC9C/HEBMZHNY/FB8IC9CHEBMZHNY.SQUARE.jpg http://cdn.instructables.com/FB8/IC9C/HEBMZHNY/FB8IC9CHEBMZHNY.SMALL.jpg SHS_PnE This lamp is very useful, and can be used as a great light source. There is a wood base that is a great place to put sticky notes or papers. Get the materials Here is a list of parts that you will need: 7 diodes 2 CDs 7 100 ohm resistors Wire USB cord 1" PVC Pipes 2 PVC Elbows Block of wood Elec...
By: SHS_PnE

Continue Reading »]]>
Thu, 21 Mar 2013 06:52:36 PDT
LED Skull lamp http://www.instructables.com/id/Glowing-LED-Skull/
LED Skull lamp - More DIY How To Projects]]> http://cdn.instructables.com/FZU/3LZB/HEBNHRBC/FZU3LZBHEBNHRBC.SQUARE2.jpg http://cdn.instructables.com/FZU/3LZB/HEBNHRBC/FZU3LZBHEBNHRBC.SQUARE.jpg http://cdn.instructables.com/FZU/3LZB/HEBNHRBC/FZU3LZBHEBNHRBC.SMALL.jpg Wopke How to make a LED skull lamp with some simple tools. You will need: You will need: - wire stripper - wire cutter - a skull - soldering iron - solder - duct tape - RGB LED strip - power supply - LED strip controller - wire - a knife Cut the LED strip Depending on how big the skull is, you'll ne...
By: Wopke

Continue Reading »]]>
Tue, 19 Mar 2013 09:38:33 PDT