Instructables: exploring - technology - cable http://www.instructables.com Sat, 25 Mar 2017 09:16:46 PDT BLOX v1.01 Shared USB Port for Two Computer - USB to USB Switch http://www.instructables.com/id/Shared-USB-Port-for-Two-Computer-USB-to-USB-Switch/
Shared USB Port for Two Computer - USB to USB Switch - More DIY How To Projects]]> https://cdn.instructables.com/F4T/G9TG/J0CON5WY/F4TG9TGJ0CON5WY.SQUARE2.jpg https://cdn.instructables.com/F4T/G9TG/J0CON5WY/F4TG9TGJ0CON5WY.SQUARE.jpg https://cdn.instructables.com/F4T/G9TG/J0CON5WY/F4TG9TGJ0CON5WY.SMALL.jpg MojiN1 What i want and why i want? helloi have an old CNC that only support rs232 and usb for reading and writing data in memory of work. i no like rs232 port so i use USB but every time i have to connect and disconnect my USB flash memory by myself and and lazy so i had to make something to make it easy f...
By: MojiN1

Continue Reading »]]>
Thu, 16 Mar 2017 14:37:16 PDT
Connect to a Raspberry Pi Zero W Via USB - No Mini HDMI Cable Needed http://www.instructables.com/id/Connect-to-a-Raspberry-Pi-Zero-W-Via-USB-No-Mini-H/
Connect to a Raspberry Pi Zero W Via USB - No Mini HDMI Cable Needed - More DIY How To Projects]]> https://cdn.instructables.com/F5P/S9X8/J08EJGNH/F5PS9X8J08EJGNH.SQUARE2.jpg https://cdn.instructables.com/F5P/S9X8/J08EJGNH/F5PS9X8J08EJGNH.SQUARE.jpg https://cdn.instructables.com/F5P/S9X8/J08EJGNH/F5PS9X8J08EJGNH.SMALL.jpg TechWizYouTube In this Instructable, you are going to learn how to connect your Raspberry Pi Zero W to your PC without using a MicroHDMI Cable.If you really enjoy this article, consider checking out my TechWizTime YouTube Channel. And for an awesome source of Raspberry Pi Accessories, check out my Raspberry Pi Ama...
By: TechWizYouTube

Continue Reading »]]>
Tue, 14 Mar 2017 17:09:47 PDT
Cable Repair http://www.instructables.com/id/Cable-Repair/
Cable Repair - More DIY How To Projects]]> https://cdn.instructables.com/FIO/58NC/J048HWFD/FIO58NCJ048HWFD.SQUARE2.jpg https://cdn.instructables.com/FIO/58NC/J048HWFD/FIO58NCJ048HWFD.SQUARE.jpg https://cdn.instructables.com/FIO/58NC/J048HWFD/FIO58NCJ048HWFD.SMALL.jpg gabevt1 Every time I get a new phone charger or cable, I run into the same problem where the wires get exposed and frayed. This normally results in the charger being thrown out and the purchasing of a new one. This set of instructions is meant to show how these cables can be repaired with the right tools. M...
By: gabevt1

Continue Reading »]]>
Sun, 12 Mar 2017 20:45:20 PDT
How to Make a USB Fan(DIY) http://www.instructables.com/id/How-to-Make-a-USB-FanDIY/
How to Make a USB Fan(DIY) - More DIY How To Projects]]> https://cdn.instructables.com/FY0/89KN/IZYGMI9P/FY089KNIZYGMI9P.SQUARE2.jpg https://cdn.instructables.com/FY0/89KN/IZYGMI9P/FY089KNIZYGMI9P.SQUARE.jpg https://cdn.instructables.com/FY0/89KN/IZYGMI9P/FY089KNIZYGMI9P.SMALL.jpg science-tech Hi friendsIn this instructable we are going to see how to make a usb fan
By: science-tech

Continue Reading »]]>
Tue, 7 Mar 2017 10:54:10 PST
Robotic Arm http://www.instructables.com/id/Robotic-Arm-12/
Robotic Arm - More DIY How To Projects]]> https://cdn.instructables.com/FWK/LJ4I/IZT6KM7W/FWKLJ4IIZT6KM7W.SQUARE2.jpg https://cdn.instructables.com/FWK/LJ4I/IZT6KM7W/FWKLJ4IIZT6KM7W.SQUARE.jpg https://cdn.instructables.com/FWK/LJ4I/IZT6KM7W/FWKLJ4IIZT6KM7W.SMALL.jpg DamiD96 Make your robotic arm!Download the files .stl and print!You need different screws and bolts, like in video (8x M2, 5x M3, 10x M4).I used:5X TGY - S901D servo battery ( like Turnigy 1800mAh, 2 Cell) Arduino Nano cables a common webcam robotic claw gym weight, like in picture Files .stl Build It...
By: DamiD96

Continue Reading »]]>
Sun, 5 Mar 2017 02:33:03 PST
Quick, Easy and Cheap Fix for Fraying Damaged Cables http://www.instructables.com/id/Quick-Easy-and-Cheap-Fix-for-Fraying-Cables/
Quick, Easy and Cheap Fix for Fraying Damaged Cables - More DIY How To Projects]]> https://cdn.instructables.com/FL2/GLGW/IZ6DD7NC/FL2GLGWIZ6DD7NC.SQUARE2.jpg https://cdn.instructables.com/FL2/GLGW/IZ6DD7NC/FL2GLGWIZ6DD7NC.SQUARE.jpg https://cdn.instructables.com/FL2/GLGW/IZ6DD7NC/FL2GLGWIZ6DD7NC.SMALL.jpg vscything As we continue to utilize the mystical power of electrons to conform to our will, there will be a need for a path on which they can travel. This comes in the form of a cable. Unfortunately as these electrons zip about, their conduit may become frayed, especially the outer sheathing revelealing the...
By: vscything

Continue Reading »]]>
Thu, 23 Feb 2017 19:52:31 PST
How to make an XLR (microphone) cable. http://www.instructables.com/id/How-to-Make-an-XLR-microphone-Cable/
How to make an XLR (microphone) cable. - More DIY How To Projects]]> https://cdn.instructables.com/F65/T8T8/IZ6CA7SC/F65T8T8IZ6CA7SC.SQUARE2.jpg https://cdn.instructables.com/F65/T8T8/IZ6CA7SC/F65T8T8IZ6CA7SC.SQUARE.jpg https://cdn.instructables.com/F65/T8T8/IZ6CA7SC/F65T8T8IZ6CA7SC.SMALL.jpg MatthewEff Making your own cable for the first time is a right of passage for aspiring audio engineers. It is also a totally useful skill for electric/electronic musicians, anyone working with live sound, and even folks interested in custom home audio. The supplies are inexpensive and you can easily make cable...
By: MatthewEff

Continue Reading »]]>
Fri, 17 Feb 2017 22:04:15 PST
Fast Usb Cable Fix http://www.instructables.com/id/Fast-Usb-Cable-Fix/
Fast Usb Cable Fix - More DIY How To Projects]]> https://cdn.instructables.com/F0H/ESTO/IYYSYCVV/F0HESTOIYYSYCVV.SQUARE2.jpg https://cdn.instructables.com/F0H/ESTO/IYYSYCVV/F0HESTOIYYSYCVV.SQUARE.jpg https://cdn.instructables.com/F0H/ESTO/IYYSYCVV/F0HESTOIYYSYCVV.SMALL.jpg sun. I inherited an Iphone with an very much used but still not totally broken Iphone cable. The perfect reason to try out my new owned "moldable glue which turns into rubber" piece.For this quick cable fix you need: 1 packet Suguru (moldable glue) water to clean your hands, a towel to dry your hands sci...
By: sun.

Continue Reading »]]>
Wed, 8 Feb 2017 05:06:44 PST
A fashion-first bracelet combines 5 gadgets in 1 for smartphones (Part II) http://www.instructables.com/id/A-Fashion-first-Bracelet-Combines-5-Gadgets-in-1-f/
A fashion-first bracelet combines 5 gadgets in 1 for smartphones (Part II) - More DIY How To Projects]]> https://cdn.instructables.com/FZ6/QOSD/IYLZRS1V/FZ6QOSDIYLZRS1V.SQUARE2.jpg https://cdn.instructables.com/FZ6/QOSD/IYLZRS1V/FZ6QOSDIYLZRS1V.SQUARE.jpg https://cdn.instructables.com/FZ6/QOSD/IYLZRS1V/FZ6QOSDIYLZRS1V.SMALL.jpg TimL122 Hello guys. I’m back. As I promised, I’ll update the following parts—add the charging function to the cable and the final prototype of this bracelet.Watch Video and Demo click here and here is the Part I Add a switch on the OTG cable I add a switch on the OTG cable to control different functions ...
By: TimL122

Continue Reading »]]>
Tue, 31 Jan 2017 09:44:29 PST
Arduino- Controlling LED's with a 4x4 keypad http://www.instructables.com/id/Arduino-Controlling-LEDs-With-a-4x4-Keypad/
Arduino- Controlling LED's with a 4x4 keypad - More DIY How To Projects]]> https://cdn.instructables.com/FXP/APRJ/IXUQ5Z78/FXPAPRJIXUQ5Z78.SQUARE2.jpg https://cdn.instructables.com/FXP/APRJ/IXUQ5Z78/FXPAPRJIXUQ5Z78.SQUARE.jpg https://cdn.instructables.com/FXP/APRJ/IXUQ5Z78/FXPAPRJIXUQ5Z78.SMALL.jpg Syoshida12 Today, I am going to show you how to create and use a 4x4 keypad controlling LED's. Materials Arduino Uno Board USB cable x1 Jumper wires x20 LED's x8 RGB LED x1 220Ohms Resistor x11 4x4 keypad x1 Connecting the Keypad to the Arduino Board. D2 - Pin1 D3 - Pin2D4 - Pin3D5 - Pin4D...
By: Syoshida12

Continue Reading »]]>
Sat, 14 Jan 2017 07:38:53 PST
DIY Data Only USB Type B http://www.instructables.com/id/DIY-Data-Only-USB-Type-B/
DIY Data Only USB Type B - More DIY How To Projects]]> https://cdn.instructables.com/FG5/8NF4/IXGFRUP5/FG58NF4IXGFRUP5.SQUARE2.jpg https://cdn.instructables.com/FG5/8NF4/IXGFRUP5/FG58NF4IXGFRUP5.SQUARE.jpg https://cdn.instructables.com/FG5/8NF4/IXGFRUP5/FG58NF4IXGFRUP5.SMALL.jpg DavisT2 This can be useful in a lot of different circumstances and it's a pretty simple mod. Me personally, I'm building a Prusa i3 and don't want to have it powered on all of the time, but it's so much more convenient to just leave it plugged into the back of my desktop since it has it's own dedicated powe...
By: DavisT2

Continue Reading »]]>
Sun, 1 Jan 2017 09:13:08 PST
Make a TV Antenna out of a Banana Peel (FREE TV) http://www.instructables.com/id/Make-a-TV-Antenna-Out-of-a-Banana-Peel/
Make a TV Antenna out of a Banana Peel (FREE TV) - More DIY How To Projects]]> https://cdn.instructables.com/FQR/5KP3/IXGFID9B/FQR5KP3IXGFID9B.SQUARE2.jpg https://cdn.instructables.com/FQR/5KP3/IXGFID9B/FQR5KP3IXGFID9B.SQUARE.jpg https://cdn.instructables.com/FQR/5KP3/IXGFID9B/FQR5KP3IXGFID9B.SMALL.jpg raspberrypi33 This Instructable is about making a TV antenna out of a banana peel. The TV antenna that we bought did not work (we live too far out for the signal to get to us), and set out to make a really cheap one. I spent about $0.50 on the whole thing. I have around 30 channels now (for free too)! Gather M...
By: raspberrypi33

Continue Reading »]]>
Sat, 31 Dec 2016 12:17:02 PST
Repair iPhone 5 USB cable!!! http://www.instructables.com/id/Repair-IPhone-5-USB-Cable/
Repair iPhone 5 USB cable!!! - More DIY How To Projects]]> https://cdn.instructables.com/FTU/MPPF/IWQVFLIJ/FTUMPPFIWQVFLIJ.SQUARE2.jpg https://cdn.instructables.com/FTU/MPPF/IWQVFLIJ/FTUMPPFIWQVFLIJ.SQUARE.jpg https://cdn.instructables.com/FTU/MPPF/IWQVFLIJ/FTUMPPFIWQVFLIJ.SMALL.jpg fdr1929 So the thing is, you enter to your home and suddenly your dog has eaten and broken your iPhone 5 USB cable, what to do now? Just read this instructable and watch the vids, and your cable will be up to live again. Disarming the damaged extreme. Almost always the damage of this kind of cables are i...
By: fdr1929

Continue Reading »]]>
Wed, 14 Dec 2016 22:37:38 PST
Devo 7E + CC2500 http://www.instructables.com/id/Devo-7E-CC2500/
Devo 7E + CC2500 - More DIY How To Projects]]> https://cdn.instructables.com/FW9/M251/IWH3BNLF/FW9M251IWH3BNLF.SQUARE2.jpg https://cdn.instructables.com/FW9/M251/IWH3BNLF/FW9M251IWH3BNLF.SQUARE.jpg https://cdn.instructables.com/FW9/M251/IWH3BNLF/FW9M251IWH3BNLF.SMALL.jpg Lasplaner Photo from HacksModsThere are some very good tutorials over on HacksMods about the A7105, NRF24L01 and Walkera 8S module installation however there is nothing about the CC2500(FrSky and some Futaba). So in this instructable I will show you how I did it.*I refer to contact pads as pins* Tin and Sol...
By: Lasplaner

Continue Reading »]]>
Wed, 7 Dec 2016 05:43:41 PST
R.R.S.S. Raspberry pi Rave Sound System http://www.instructables.com/id/RRSS-Raspberry-Pi-Rave-Sound-System/
R.R.S.S. Raspberry pi Rave Sound System - More DIY How To Projects]]> https://cdn.instructables.com/F4F/U3A3/IVO59HVN/F4FU3A3IVO59HVN.SQUARE2.jpg https://cdn.instructables.com/F4F/U3A3/IVO59HVN/F4FU3A3IVO59HVN.SQUARE.jpg https://cdn.instructables.com/F4F/U3A3/IVO59HVN/F4FU3A3IVO59HVN.SMALL.jpg Garage 420 Hi guys! We are a group of unidentified young men who are interested in technology, nature, recycling, music and several other things but none of us speak English. Some of us works, others not, some studies and there are those who do nothing but none of us is the leader. When we have some free time...
By: Garage 420

Continue Reading »]]>
Mon, 28 Nov 2016 13:39:02 PST
How to Save on Phone, Cable, and Internet Service http://www.instructables.com/id/How-to-Save-on-Phone-Cable-and-Internet-Service/
How to Save on Phone, Cable, and Internet Service - More DIY How To Projects]]> https://cdn.instructables.com/FIE/IH0D/IVO43AGP/FIEIH0DIVO43AGP.SQUARE2.jpg https://cdn.instructables.com/FIE/IH0D/IVO43AGP/FIEIH0DIVO43AGP.SQUARE.jpg https://cdn.instructables.com/FIE/IH0D/IVO43AGP/FIEIH0DIVO43AGP.SMALL.jpg i-doc Everyone knows that you can save money on cable, phone, and internet by bundling services through the same company. However, there are other ways to save on each of these luxuries. Here are a few tips to help you lower your phone, cable, and internet bills. Phone Service There are many different ...
By: i-doc

Continue Reading »]]>
Wed, 23 Nov 2016 19:59:01 PST
Raspberry Pi Surveillance Rover (Land Drone) http://www.instructables.com/id/Raspberry-Pi-Surveillance-Drone-Land/
Raspberry Pi Surveillance Rover (Land Drone) - More DIY How To Projects]]> https://cdn.instructables.com/F4G/PQ7T/IV0AOCUB/F4GPQ7TIV0AOCUB.SQUARE2.jpg https://cdn.instructables.com/F4G/PQ7T/IV0AOCUB/F4GPQ7TIV0AOCUB.SQUARE.jpg https://cdn.instructables.com/F4G/PQ7T/IV0AOCUB/F4GPQ7TIV0AOCUB.SMALL.jpg DavidDrones Ever wanted to have a surveillance drone to monitor your surroundings? Of course you have! Using a Raspberry Pi for the on-board logic, this compact, mobile computer, will create a local port that streams a video in real-time while simultaneously creating Bluetooth sockets to read values sent by a ...
By: DavidDrones

Continue Reading »]]>
Sun, 6 Nov 2016 08:21:50 PST
Sending Balanced Stereo XLR Outputs to Unbalanced Stereo TRS Input http://www.instructables.com/id/Sending-Balanced-Stereo-XLR-Outputs-to-Unbalanced-/
Sending Balanced Stereo XLR Outputs to Unbalanced Stereo TRS Input - More DIY How To Projects]]> https://cdn.instructables.com/F53/INBU/IUSLIUI3/F53INBUIUSLIUI3.SQUARE2.jpg https://cdn.instructables.com/F53/INBU/IUSLIUI3/F53INBUIUSLIUI3.SQUARE.jpg https://cdn.instructables.com/F53/INBU/IUSLIUI3/F53INBUIUSLIUI3.SMALL.jpg ehobgood This tutorial will overview creating a cable which can take a balanced stereo signal from two XLR terminated outputs and turns it into an unbalanced stereo signal terminated by a TRS connector. It includes information about the basics of unbalanced versus balanced audio signals as well as instructio...
By: ehobgood

Continue Reading »]]>
Fri, 28 Oct 2016 07:27:18 PDT
DIY Bluetooth Speaker Under 5$ http://www.instructables.com/id/DIY-Bluetooth-Speaker-Under-5/
DIY Bluetooth Speaker Under 5$ - More DIY How To Projects]]> https://cdn.instructables.com/FLL/GBMR/IUOI9BL2/FLLGBMRIUOI9BL2.SQUARE2.jpg https://cdn.instructables.com/FLL/GBMR/IUOI9BL2/FLLGBMRIUOI9BL2.SQUARE.jpg https://cdn.instructables.com/FLL/GBMR/IUOI9BL2/FLLGBMRIUOI9BL2.SMALL.jpg bobes360 Today I'll show you how I made this awesome bluetooth speaker for total cost under 5$. It is easy project that you can make with minimal knowledge of electronics and woodworking. Just for you to know : this is not very high quality speaker. It's mainly made from scrap and to be as cheap as possible....
By: bobes360

Continue Reading »]]>
Wed, 26 Oct 2016 17:36:57 PDT
Cable Terminals - High Current - for Off Grid Solar Batteries http://www.instructables.com/id/Cable-Terminals-High-Power-for-Off-Grid-Solar-Batt/
Cable Terminals - High Current - for Off Grid Solar Batteries - More DIY How To Projects]]> https://cdn.instructables.com/FU5/VEG2/IUEU4K8G/FU5VEG2IUEU4K8G.SQUARE2.jpg https://cdn.instructables.com/FU5/VEG2/IUEU4K8G/FU5VEG2IUEU4K8G.SQUARE.jpg https://cdn.instructables.com/FU5/VEG2/IUEU4K8G/FU5VEG2IUEU4K8G.SMALL.jpg jothhughes I'm building an off-grid solar power system and wanted a cheap solution to connect my batteries. High powered terminal ends are expensive, so I came up with this!Because these terminals are so cheap and easy to make, it won't be a long Instructable.I'm a teacher, so I like to give the 5 second summa...
By: jothhughes

Continue Reading »]]>
Tue, 18 Oct 2016 04:01:48 PDT
A gadget combines 5 gadgets in 1 (Part I) http://www.instructables.com/id/A-Gadget-Combines-5-Gadgets-in-1-Part-I/
A gadget combines 5 gadgets in 1 (Part I) - More DIY How To Projects]]> https://cdn.instructables.com/FUW/7OIT/ITW2KGTH/FUW7OITITW2KGTH.SQUARE2.jpg https://cdn.instructables.com/FUW/7OIT/ITW2KGTH/FUW7OITITW2KGTH.SQUARE.jpg https://cdn.instructables.com/FUW/7OIT/ITW2KGTH/FUW7OITITW2KGTH.SMALL.jpg TimL122 Hi guys,I DIY a gadget integrating the charging cable, the sync cable, the OTG cable, the flash drive and the Micro-SD card reader.The reason why I want to make such a thingCables, the USB flash drive or micro SD card reader, these gadgets are not so necessary and used frequently for every day. But ...
By: TimL122

Continue Reading »]]>
Wed, 5 Oct 2016 18:42:18 PDT
Getting Started With ESP8266 | AT Commands http://www.instructables.com/id/Getting-Started-With-ESP8266-AT-Commands/
Getting Started With ESP8266 | AT Commands - More DIY How To Projects]]> https://cdn.instructables.com/F9S/F3NQ/ITKYSUHE/F9SF3NQITKYSUHE.SQUARE2.jpg https://cdn.instructables.com/F9S/F3NQ/ITKYSUHE/F9SF3NQITKYSUHE.SQUARE.jpg https://cdn.instructables.com/F9S/F3NQ/ITKYSUHE/F9SF3NQITKYSUHE.SMALL.jpg WearGenius Published on Sep 26, 2016Connecting the ESP8266 Wi-Fi module to PC and trying out some AT Commands.The ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability produced by Shanghai-based Chinese manufacturer, Espressif Systems.The chip first came to the attention of wes...
By: WearGenius

Continue Reading »]]>
Sun, 25 Sep 2016 06:28:49 PDT
Repair/ Reuse Dead LED Bulbs for USB Power http://www.instructables.com/id/Repair-Reuse-Dead-LED-Bulbs-for-USB-Power/
Repair/ Reuse Dead LED Bulbs for USB Power - More DIY How To Projects]]> https://cdn.instructables.com/FNQ/AU5E/IRXTDKDQ/FNQAU5EIRXTDKDQ.SQUARE2.jpg https://cdn.instructables.com/FNQ/AU5E/IRXTDKDQ/FNQAU5EIRXTDKDQ.SQUARE.jpg https://cdn.instructables.com/FNQ/AU5E/IRXTDKDQ/FNQAU5EIRXTDKDQ.SMALL.jpg bhvm The LED household bulbs (A-lamps) are here to stay. They brought in Very high efficiency (Compared to stupid Incans), Less heat output; and more importantly, Longer operating life.However there are still times where an LED bulb fails. Interestingly, the usual failure mode of LED bulb is just the bus...
By: bhvm

Continue Reading »]]>
Sun, 21 Aug 2016 08:24:37 PDT
Controlling L293D Motor Driver by Arduino http://www.instructables.com/id/Controlling-L293D-Motor-Driver-by-Arduino/
Controlling L293D Motor Driver by Arduino - More DIY How To Projects]]> https://cdn.instructables.com/FN1/EJO3/IRO1H32P/FN1EJO3IRO1H32P.SQUARE2.jpg https://cdn.instructables.com/FN1/EJO3/IRO1H32P/FN1EJO3IRO1H32P.SQUARE.jpg https://cdn.instructables.com/FN1/EJO3/IRO1H32P/FN1EJO3IRO1H32P.SMALL.jpg ruhliar This instructable will show you how to control 1 or 2 motors forward or backward by Arduino (my: UNO). What will you need? You will need:-L293D-breadboard-wires-Arduino-USB cable-battery with voltage for motor Connecting Connect it all as it's on images. If you don't want to use 2 motors just ...
By: ruhliar

Continue Reading »]]>
Wed, 10 Aug 2016 09:37:47 PDT
Yamaha Hph-200 Cable Mod http://www.instructables.com/id/Yamaha-Hph-200-Cable-Mod/
Yamaha Hph-200 Cable Mod - More DIY How To Projects]]> https://cdn.instructables.com/FWP/ZMFB/IRC6Y70D/FWPZMFBIRC6Y70D.SQUARE2.jpg https://cdn.instructables.com/FWP/ZMFB/IRC6Y70D/FWPZMFBIRC6Y70D.SQUARE.jpg https://cdn.instructables.com/FWP/ZMFB/IRC6Y70D/FWPZMFBIRC6Y70D.SMALL.jpg Bluesat Have the cleanest looking HPH-200 around! No more visible wires! Tools and materials you will need:20 to 28 AWG stranded wire, most thin wires will workThin (around 1mm diameter) Earbud wire, at least 50 cm, salvaged from cheap earbuds, see pictureStereo Socket (I used PJ-392, click to see on eBay)S...
By: Bluesat

Continue Reading »]]>
Tue, 2 Aug 2016 04:57:20 PDT
Professional Sound Booth http://www.instructables.com/id/Professional-Sound-Booth/
Professional Sound Booth - More DIY How To Projects]]> https://cdn.instructables.com/F07/OE0M/IR5MUF3M/F07OE0MIR5MUF3M.SQUARE2.jpg https://cdn.instructables.com/F07/OE0M/IR5MUF3M/F07OE0MIR5MUF3M.SQUARE.jpg https://cdn.instructables.com/F07/OE0M/IR5MUF3M/F07OE0MIR5MUF3M.SMALL.jpg god.favored I recently built out a new youth room and we really wanted a good looking sound booth. The booth is normally overlooked, or hidden away as much as possible, but the optimal mixing point is the middle of the room, so why not have the sound booth look as good as the rest of the room? This is more of...
By: god.favored

Continue Reading »]]>
Wed, 27 Jul 2016 23:34:04 PDT
DIY Jumper Wires (male to Male) http://www.instructables.com/id/DIY-Jumper-Wires-male-to-Male/
DIY Jumper Wires (male to Male) - More DIY How To Projects]]> https://cdn.instructables.com/FM9/L0J1/IQW1FEBV/FM9L0J1IQW1FEBV.SQUARE2.jpg https://cdn.instructables.com/FM9/L0J1/IQW1FEBV/FM9L0J1IQW1FEBV.SQUARE.jpg https://cdn.instructables.com/FM9/L0J1/IQW1FEBV/FM9L0J1IQW1FEBV.SMALL.jpg chrisjlionel A jump wire, is a short electrical wire with a solid tip at each end (or sometimes without them, simply "tinned"), which is normally used to interconnect the components in a breadboard. Follow this procedure to make your own. Gather the requirements Flat ribbon cables Male header pins 3 m...
By: chrisjlionel

Continue Reading »]]>
Thu, 21 Jul 2016 03:56:10 PDT
Ethernet Crossover Cable from a straight-through ethernet cable http://www.instructables.com/id/Ethernet-Crossover-Cable-From-a-Straight-through-E/
Ethernet Crossover Cable from a straight-through ethernet cable - More DIY How To Projects]]> https://cdn.instructables.com/FRO/78U2/IQSAB81U/FRO78U2IQSAB81U.SQUARE2.jpg https://cdn.instructables.com/FRO/78U2/IQSAB81U/FRO78U2IQSAB81U.SQUARE.jpg https://cdn.instructables.com/FRO/78U2/IQSAB81U/FRO78U2IQSAB81U.SMALL.jpg Punarnia Make an ethernet crossover cable from a straight-through ethernet cable Things you will need Ethernet cableSoldering ironSolder shrinkable tubing cable cutting plier Tape Remove a small ​part of the tubing Remove a small part of the tubing Soldering the cable Cut the green, orange, strip...
By: Punarnia

Continue Reading »]]>
Tue, 19 Jul 2016 06:09:52 PDT
Avoid Your Dish From Rusting http://www.instructables.com/id/Avoid-Your-Dish-From-Rusting/
Avoid Your Dish From Rusting - More DIY How To Projects]]> https://cdn.instructables.com/F34/C6UJ/IQJ05PZK/F34C6UJIQJ05PZK.SQUARE2.jpg https://cdn.instructables.com/F34/C6UJ/IQJ05PZK/F34C6UJIQJ05PZK.SQUARE.jpg https://cdn.instructables.com/F34/C6UJ/IQJ05PZK/F34C6UJIQJ05PZK.SMALL.jpg MustaphaH5 Here I'm talking about a small dish (KU) you can make a few things to avoid the serious consequences that are easy to happen if you scorn,it is your responsibility to do the following:- Remember to use special coverings Plastic cover - On hand to keep LNB and hand of keeping the dish.- Because the ...
By: MustaphaH5

Continue Reading »]]>
Tue, 12 Jul 2016 06:22:41 PDT
How to fix the cable lightning Apple http://www.instructables.com/id/How-to-Fix-the-Cable-Lightning-Apple/
How to fix the cable lightning Apple - More DIY How To Projects]]> https://cdn.instructables.com/FCY/ZUFG/IQFHFITN/FCYZUFGIQFHFITN.SQUARE2.jpg https://cdn.instructables.com/FCY/ZUFG/IQFHFITN/FCYZUFGIQFHFITN.SQUARE.jpg https://cdn.instructables.com/FCY/ZUFG/IQFHFITN/FCYZUFGIQFHFITN.SMALL.jpg FelipeB46 Hi people, this is my first instructable, I don´t write very well in english, so sorry me for this...Many people have iphones, ipads, and ipods, their original cable sometimes break, and then you need to buy another one, and how Apple charges a lot for their original cables, found a way to fix them ...
By: FelipeB46

Continue Reading »]]>
Sat, 9 Jul 2016 21:17:16 PDT
Bose Companion 5 Speakers Extention Cable http://www.instructables.com/id/Bose-Speakers-Extention-Cable/
Bose Companion 5 Speakers Extention Cable - More DIY How To Projects]]> https://cdn.instructables.com/FF4/6GYW/IQ8A6D1D/FF46GYWIQ8A6D1D.SQUARE2.jpg https://cdn.instructables.com/FF4/6GYW/IQ8A6D1D/FF46GYWIQ8A6D1D.SQUARE.jpg https://cdn.instructables.com/FF4/6GYW/IQ8A6D1D/FF46GYWIQ8A6D1D.SMALL.jpg IlyaPl The Bose Companion 5 speaker system (a sub-woofer, a left speaker and a right speaker) is meant to be used on a computer desk so the cables are pretty short. I wanted to place them on bookshelves further away from the sub-woofer but Bose does not sell extension cables and I didn't want to cut the or...
By: IlyaPl

Continue Reading »]]>
Tue, 5 Jul 2016 06:25:01 PDT
IPhone cable repair(or any other cable) http://www.instructables.com/id/IPhone-Cable-Repairor-Any-Other-Cable/
IPhone cable repair(or any other cable) - More DIY How To Projects]]> https://cdn.instructables.com/F4C/2YZB/IPOC2VXL/F4C2YZBIPOC2VXL.SQUARE2.jpg https://cdn.instructables.com/F4C/2YZB/IPOC2VXL/F4C2YZBIPOC2VXL.SQUARE.jpg https://cdn.instructables.com/F4C/2YZB/IPOC2VXL/F4C2YZBIPOC2VXL.SMALL.jpg KotPomojnyj Hello! This is my first instructable. I'd like to share my process of repair broken cable's insulation. You know how apple's cable can be corrupted easy, so if can't use them carefully, you shoul do this first. Heat shrink stretch I took white heat shrink pipe 5 mm diametr. This color looks bette...
By: KotPomojnyj

Continue Reading »]]>
Mon, 20 Jun 2016 15:44:34 PDT
Homemade coaxial antenna cable http://www.instructables.com/id/Homemade-Coaxial-Antenna-Cable/
Homemade coaxial antenna cable - More DIY How To Projects]]> https://cdn.instructables.com/FN7/U1QI/IPK99QHU/FN7U1QIIPK99QHU.SQUARE2.jpg https://cdn.instructables.com/FN7/U1QI/IPK99QHU/FN7U1QIIPK99QHU.SQUARE.jpg https://cdn.instructables.com/FN7/U1QI/IPK99QHU/FN7U1QIIPK99QHU.SMALL.jpg rallekralle Hello yet again readers!today i'll be showing you how to make some really simple homemade coaxial cable, for FPV antennas n' stuff.but first, a bit of a disclaimer: i don't know anything about what makes antenna cable "good", but i see no reason why this wouldn't work fine.Let's get started! Get y...
By: rallekralle

Continue Reading »]]>
Sun, 19 Jun 2016 04:26:20 PDT
Headset or Headphone Hanger http://www.instructables.com/id/Headset-or-Headphone-Hanger/
Headset or Headphone Hanger - More DIY How To Projects]]> https://cdn.instructables.com/FFV/R05X/IPJTDVQ6/FFVR05XIPJTDVQ6.SQUARE2.jpg https://cdn.instructables.com/FFV/R05X/IPJTDVQ6/FFVR05XIPJTDVQ6.SQUARE.jpg https://cdn.instructables.com/FFV/R05X/IPJTDVQ6/FFVR05XIPJTDVQ6.SMALL.jpg rockeratr In this Instructable I will show you how to make a simple hanger for your headphones or headset using a PCI expansion bay cover from an old PC case. This is very easy to do. Hangers like this can also be used for cable management on walls or desks. Materials Needed 1. Pliers (needle nose work be...
By: rockeratr

Continue Reading »]]>
Fri, 17 Jun 2016 08:07:03 PDT
3D Printed Wire Management http://www.instructables.com/id/3D-Printed-Wire-Management/
3D Printed Wire Management - More DIY How To Projects]]> https://cdn.instructables.com/FWP/1YRQ/IPA1QVCO/FWP1YRQIPA1QVCO.SQUARE2.jpg https://cdn.instructables.com/FWP/1YRQ/IPA1QVCO/FWP1YRQIPA1QVCO.SQUARE.jpg https://cdn.instructables.com/FWP/1YRQ/IPA1QVCO/FWP1YRQIPA1QVCO.SMALL.jpg OfficialZander Have you ever had to deal with pesky wires dangling around your printer, waiting to be snagged or ripped from connectors? Don't like the standard cable wrap? That is where Cable Chains come in. Cable chains house your wires in a chain which bends/moves with a moving part to protect, and keeps you're...
By: OfficialZander

Continue Reading »]]>
Sat, 11 Jun 2016 07:31:57 PDT
Making spiral wire wrap tube for cable organizing http://www.instructables.com/id/Making-Spiral-Wire-Wrap-Tube-for-Cable-Organizing/
Making spiral wire wrap tube for cable organizing - More DIY How To Projects]]> https://cdn.instructables.com/FOM/PAW6/IP094ZMR/FOMPAW6IP094ZMR.SQUARE2.jpg https://cdn.instructables.com/FOM/PAW6/IP094ZMR/FOMPAW6IP094ZMR.SQUARE.jpg https://cdn.instructables.com/FOM/PAW6/IP094ZMR/FOMPAW6IP094ZMR.SMALL.jpg TheKitMurkit. Hello there!If you have something ended in your bathroom that was stored in a bottle with a push dispenser like that on the photo, that means you have some free nice parts for your projects! This is my first instructable and it is very simple! All you need is a knife, the sharper - the better! :) ...
By: TheKitMurkit.

Continue Reading »]]>
Mon, 6 Jun 2016 04:57:10 PDT
Autonomous Gripforce Stabilizer Robotic Arm http://www.instructables.com/id/Autonomous-Gripforce-Stabilizer-Robotic-Arm/
Autonomous Gripforce Stabilizer Robotic Arm - More DIY How To Projects]]> https://cdn.instructables.com/F9N/NLQ1/IOXJ257D/F9NNLQ1IOXJ257D.SQUARE2.jpg https://cdn.instructables.com/F9N/NLQ1/IOXJ257D/F9NNLQ1IOXJ257D.SQUARE.jpg https://cdn.instructables.com/F9N/NLQ1/IOXJ257D/F9NNLQ1IOXJ257D.SMALL.jpg villadsen1 The Autonomous Gripforce Stabilizer Robotic Arm is a robot arm capable of applying the exact amount of pressure needed to pick up any object without breaking nor dropping it, as you can see in the video. It is first demonstrated in manual mode and again with the autonomous grip force enabled to show...
By: villadsen1

Continue Reading »]]>
Thu, 2 Jun 2016 06:15:16 PDT
Wireless - omnidirectional antenna Plus +10Db - Antena Omni Potencializar http://www.instructables.com/id/Wireless-Omnidirectional-Antenna-Plus-10Db-Antena-/
Wireless - omnidirectional antenna Plus +10Db - Antena Omni Potencializar - More DIY How To Projects]]> https://cdn.instructables.com/FX4/R422/IOLP28Q0/FX4R422IOLP28Q0.SQUARE2.jpg https://cdn.instructables.com/FX4/R422/IOLP28Q0/FX4R422IOLP28Q0.SQUARE.jpg https://cdn.instructables.com/FX4/R422/IOLP28Q0/FX4R422IOLP28Q0.SMALL.jpg JuarezG Antena Wireless omnidirecional para potencializar sinal de roteadorWireless - omnidirectional antenna Plus +10Db - Antena Omni PotencializarMATERIAL:TUBO DE LATÃO, USADO EM ANTENAS CABO COAXIAL DE 50 Omhscable coaxial 50 OmhsAdaptador FEME ou antena padrão de roteador para usar como conector prontot...
By: JuarezG

Continue Reading »]]>
Tue, 24 May 2016 17:07:16 PDT
Optimized Surface Pro 2 3 4 Charger. http://www.instructables.com/id/Optimized-Surface-Pro-2-3-4-Charger/
Optimized Surface Pro 2 3 4 Charger. - More DIY How To Projects]]> https://cdn.instructables.com/FTY/XBWX/INM7M9IT/FTYXBWXINM7M9IT.SQUARE2.jpg https://cdn.instructables.com/FTY/XBWX/INM7M9IT/FTYXBWXINM7M9IT.SQUARE.jpg https://cdn.instructables.com/FTY/XBWX/INM7M9IT/FTYXBWXINM7M9IT.SMALL.jpg motivado Hi Instructaguys, This is a very simple hack or mod for the surface pro 4 Charger. I believe it works for any version and no special skills are needed. If you don't know how to solder or 3D Print I will give you some links to buy the stuff already done.Actually, I am surprised how an amazing product...
By: motivado

Continue Reading »]]>
Sun, 1 May 2016 06:18:01 PDT
Battery Bank Recycled From Laptop Battery http://www.instructables.com/id/Battery-Bank-Recycled-From-Laptop-Battery/
Battery Bank Recycled From Laptop Battery - More DIY How To Projects]]> https://cdn.instructables.com/FBE/SG9N/IQB50UAK/FBESG9NIQB50UAK.SQUARE2.jpg https://cdn.instructables.com/FBE/SG9N/IQB50UAK/FBESG9NIQB50UAK.SQUARE.jpg https://cdn.instructables.com/FBE/SG9N/IQB50UAK/FBESG9NIQB50UAK.SMALL.jpg Applied Electronics Published on 29-Apr-2016this intractable will show you how you could re-use laptop batteries as battery bank.video can be watched here:
By: Applied Electronics

Continue Reading »]]>
Fri, 29 Apr 2016 09:19:07 PDT
Remote shutter release cable for Nikon http://www.instructables.com/id/Remote-Shutter-Release-Cable-for-Nikon/
Remote shutter release cable for Nikon - More DIY How To Projects]]> https://cdn.instructables.com/FKI/FRDO/IN35QUP8/FKIFRDOIN35QUP8.SQUARE2.jpg https://cdn.instructables.com/FKI/FRDO/IN35QUP8/FKIFRDOIN35QUP8.SQUARE.jpg https://cdn.instructables.com/FKI/FRDO/IN35QUP8/FKIFRDOIN35QUP8.SMALL.jpg HeinrichL1 In this instructable I will be showing you how I made a shutter release cable for my Nikon D3200, although the procedure may be adapted for various other makes and models. This shutter release cable replaces the Nikon MC-DC2 and makes use of an adapter cable which has the shutter release connector o...
By: HeinrichL1

Continue Reading »]]>
Fri, 22 Apr 2016 19:01:54 PDT
How to upload code to Arduino Mega from Android device http://www.instructables.com/id/Samsung-Galaxy-Note-5-With-Arduino-Mega/
How to upload code to Arduino Mega from Android device - More DIY How To Projects]]> https://cdn.instructables.com/FC7/64GS/IN69BX38/FC764GSIN69BX38.SQUARE2.jpg https://cdn.instructables.com/FC7/64GS/IN69BX38/FC764GSIN69BX38.SQUARE.jpg https://cdn.instructables.com/FC7/64GS/IN69BX38/FC764GSIN69BX38.SMALL.jpg Bay Yolal Today, I am going to show you how to use Samsung Galaxy Note 5 mobile phone is running Android v6.0 and it supports OTG - On The Go option to upload any Arduino codes to Arduino boards such as Arduino Mega, Arduino Uno, and the others. By the way, I haven't got an iPhone to test on iOS loaded phone....
By: Bay Yolal

Continue Reading »]]>
Mon, 18 Apr 2016 15:56:20 PDT
Razer Blackshark Detachable Cable Mod http://www.instructables.com/id/Razer-Blackshark-Detachable-Cable-Mod/
Razer Blackshark Detachable Cable Mod - More DIY How To Projects]]> https://cdn.instructables.com/FGW/7WSL/IMQLIFSF/FGW7WSLIMQLIFSF.SQUARE2.jpg https://cdn.instructables.com/FGW/7WSL/IMQLIFSF/FGW7WSLIMQLIFSF.SQUARE.jpg https://cdn.instructables.com/FGW/7WSL/IMQLIFSF/FGW7WSLIMQLIFSF.SMALL.jpg dodekeract This guide will help you to re-purpose the microphone connector to a detachable cable-connector. I did this because I already own a studio-quality microphone and my headphones broke. Note that this WILL make your microphone useless.The detachable cable-connector should be able to prolong your Blacks...
By: dodekeract

Continue Reading »]]>
Thu, 7 Apr 2016 20:08:42 PDT
Multi-Use Bendy Phone Charging Cable http://www.instructables.com/id/Multi-Use-Bendy-Phone-Charging-Cable/
Multi-Use Bendy Phone Charging Cable - More DIY How To Projects]]> https://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SQUARE2.jpg https://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SQUARE.jpg https://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SMALL.jpg pucksurfer Phone cables are one of the more important parts of our lives, we don't realize it but without them, we wouldn't be able to charge our phones, and without our phones... well let's not go there. Anyway, you get the idea, phone chargers are a pivotal part of our lives... (and to all of you people out ...
By: pucksurfer

Continue Reading »]]>
Mon, 21 Mar 2016 19:30:49 PDT
How to Fix iPhone Charging Cable http://www.instructables.com/id/How-to-Fix-IPhone-Charging-Cable/
How to Fix iPhone Charging Cable - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FUM/BXNR/ILWJ65KO/FUMBXNRILWJ65KO.SQUARE2.jpg http://www.instructables.com/files/deriv/FUM/BXNR/ILWJ65KO/FUMBXNRILWJ65KO.SQUARE.jpg http://www.instructables.com/files/deriv/FUM/BXNR/ILWJ65KO/FUMBXNRILWJ65KO.SMALL.gif makememaker Materials Needed:1: Broken iPhone Charging Cable2: "Click" Ball point pen with spring3: Heat Shrink Tube4: Hair DryerDirections: Please follow the steps in the gif animation!
By: makememaker

Continue Reading »]]>
Fri, 18 Mar 2016 06:23:15 PDT
Raspberry Pi - VNC & SSH http://www.instructables.com/id/Raspberry-Pi-SSH/
Raspberry Pi - VNC & SSH - More DIY How To Projects]]> https://cdn.instructables.com/FOK/CBWE/ILQTFA26/FOKCBWEILQTFA26.SQUARE2.jpg https://cdn.instructables.com/FOK/CBWE/ILQTFA26/FOKCBWEILQTFA26.SQUARE.jpg https://cdn.instructables.com/FOK/CBWE/ILQTFA26/FOKCBWEILQTFA26.SMALL.jpg Bay Yolal Today, I am going to show you how to use Raspberry Pi board without using a HDMI monitor. Generally this is called as SSH to access Raspberry Pi without using HDMI-slot to see the desktop of Raspberry Pi.The need list:1. Raspberry Pi (I used Raspberry Pi 2 Model B v1.1 board for this instructable) (...
By: Bay Yolal

Continue Reading »]]>
Sun, 13 Mar 2016 14:21:22 PDT
DIY Emergancy BNC Cable http://www.instructables.com/id/DIY-Emergancy-BNC-Cable/
DIY Emergancy BNC Cable - More DIY How To Projects]]> https://cdn.instructables.com/FFP/DSDO/ILFI3V8C/FFPDSDOILFI3V8C.SQUARE2.jpg https://cdn.instructables.com/FFP/DSDO/ILFI3V8C/FFPDSDOILFI3V8C.SQUARE.jpg https://cdn.instructables.com/FFP/DSDO/ILFI3V8C/FFPDSDOILFI3V8C.SMALL.jpg toxicnos Sometimes when working with electronics, you may need a BNC cable to connect different test equipment together. If you are in a pinch and don't have a BNC cable but an oscilloscope probe, here's how to make one.Note: This does not work on all probes, only ones where the cable and probe separate, and...
By: toxicnos

Continue Reading »]]>
Sat, 5 Mar 2016 19:46:53 PST
How to replace the LCD flex cable for Canon HF11 camcorder http://www.instructables.com/id/How-to-Replace-the-LCD-Cable-for-Canon-HF11-Camcor/
How to replace the LCD flex cable for Canon HF11 camcorder - More DIY How To Projects]]> https://cdn.instructables.com/FJO/C9MQ/ILE0MC0T/FJOC9MQILE0MC0T.SQUARE2.jpg https://cdn.instructables.com/FJO/C9MQ/ILE0MC0T/FJOC9MQILE0MC0T.SQUARE.jpg https://cdn.instructables.com/FJO/C9MQ/ILE0MC0T/FJOC9MQILE0MC0T.SMALL.jpg the_russian My Canon HF11camcorder started to fail displaying the image when the LCD was fully open, for a while it worked only when it was only half-open and finally I had no image on the LCD.The culprit – the LCD ribbon cable that pass through the hinge.The only Canon service from my country refused me twice....
By: the_russian

Continue Reading »]]>
Sat, 5 Mar 2016 07:15:43 PST
Apple 30 Pin Charger for Samsung Hack http://www.instructables.com/id/Apple-30-Pin-Charger-for-Samsung-Hack/
Apple 30 Pin Charger for Samsung Hack - More DIY How To Projects]]> https://cdn.instructables.com/F2S/IS56/IL8LFTN4/F2SIS56IL8LFTN4.SQUARE2.jpg https://cdn.instructables.com/F2S/IS56/IL8LFTN4/F2SIS56IL8LFTN4.SQUARE.jpg https://cdn.instructables.com/F2S/IS56/IL8LFTN4/F2SIS56IL8LFTN4.SMALL.jpg Shane80 Use Apple 30 Pin To Charge Samsung Tablet Samsung 30 pin cables are faultyAlthough my tablet is a few years old I got it off my dad whom used it for 2 months then put it in a drawer and bought an iPad. I used it for 2 weeks then it wouldn't chargeI cut it open the cable but all the wires were co...
By: Shane80

Continue Reading »]]>
Tue, 1 Mar 2016 01:23:59 PST
Protect and Organize Your Lightning/USB Cables http://www.instructables.com/id/Protect-and-Organize-Your-LightningUSB-Cables/
Protect and Organize Your Lightning/USB Cables - More DIY How To Projects]]> https://cdn.instructables.com/FCD/Q00Y/IKY6FRL8/FCDQ00YIKY6FRL8.SQUARE2.jpg https://cdn.instructables.com/FCD/Q00Y/IKY6FRL8/FCDQ00YIKY6FRL8.SQUARE.jpg https://cdn.instructables.com/FCD/Q00Y/IKY6FRL8/FCDQ00YIKY6FRL8.SMALL.jpg MarcoG6 Lighting cables break so easy from being bent at the ends and getting pinched, putting heat shrink over the ends helps but they still get pinched in the middle and get tangled but by putting a small magnet in the heat shrink with the cable you can protect it and securely attach it to other magnets, ...
By: MarcoG6

Continue Reading »]]>
Mon, 22 Feb 2016 20:17:48 PST