Instructables: exploring - technology - dremel http://www.instructables.com Tue, 30 Sep 2014 08:52:21 PDT BLOX v1.01 Solidoodle 2 (2nd Gen) to CNC Mill Conversion http://www.instructables.com/id/Solidoodle-2-2nd-Gen-to-CNC-Mill-Conversion/
Solidoodle 2 (2nd Gen) to CNC Mill Conversion - More DIY How To Projects]]> http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SQUARE2.jpg http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SQUARE.jpg http://cdn.instructables.com/FJW/XV51/HZB3SRH6/FJWXV51HZB3SRH6.SMALL.jpg andrew.moody.315 This Instructable is to demonstrate the procedure I used to convert my Solidoodle 2 (or 2nd Gen Solidoodle) to a desktop CNC mill. I took the minimalist approach and changed only those things necessary to complete the expected outcome. As a consequence, there is no additional hardware required. T...
By: andrew.moody.315

Continue Reading »]]>
Fri, 29 Aug 2014 18:00:47 PDT
Raspberry Pi Powered Bar-top Arcade Machine http://www.instructables.com/id/Raspberry-PiCade-Bartop-Arcade-Machine-powered-by-/
Raspberry Pi Powered Bar-top Arcade Machine - More DIY How To Projects]]> http://cdn.instructables.com/FCV/USXM/HZB3NT75/FCVUSXMHZB3NT75.SQUARE2.jpg http://cdn.instructables.com/FCV/USXM/HZB3NT75/FCVUSXMHZB3NT75.SQUARE.jpg http://cdn.instructables.com/FCV/USXM/HZB3NT75/FCVUSXMHZB3NT75.SMALL.jpg MoTinkerGNome I was browsing Instructables when i came across rbates4 and his Raspberry Pi powered arcade machine. http://www.instructables.com/id/Build-your-own-Min...I figured hey I have a spare DVI monitor, an X-arcadestick and a desire to tinker with the Raspberry Pi microcomputer. I am going to have to build...
By: MoTinkerGNome

Continue Reading »]]>
Wed, 27 Aug 2014 06:25:21 PDT
Ornament: Repurposed Light Bulb http://www.instructables.com/id/Ornament-Repurposed-Light-Bulb/
Ornament: Repurposed Light Bulb - More DIY How To Projects]]> http://cdn.instructables.com/FF3/PX2Q/HZB3IQTH/FF3PX2QHZB3IQTH.SQUARE2.jpg http://cdn.instructables.com/FF3/PX2Q/HZB3IQTH/FF3PX2QHZB3IQTH.SQUARE.jpg http://cdn.instructables.com/FF3/PX2Q/HZB3IQTH/FF3PX2QHZB3IQTH.SMALL.jpg TheHiveTHPL Simple Dremel Project for Instructables.Repurpose an old light bulb to create a lighted ornament. Total Build Time: 35 minsDremel work: 5-10 minsWiring: 5-10 minsCustomizing: 10-15 mins Gather all the parts needed for this project: Dremel tool and cutting accessories(1) medium light bulb...
By: TheHiveTHPL

Continue Reading »]]>
Tue, 26 Aug 2014 11:02:37 PDT
LEGO USB Case http://www.instructables.com/id/LEGO-USB-Case/
LEGO USB Case - More DIY How To Projects]]> http://cdn.instructables.com/FRX/39DY/HZ9O3RET/FRX39DYHZ9O3RET.SQUARE2.jpg http://cdn.instructables.com/FRX/39DY/HZ9O3RET/FRX39DYHZ9O3RET.SQUARE.jpg http://cdn.instructables.com/FRX/39DY/HZ9O3RET/FRX39DYHZ9O3RET.SMALL.jpg micreatespace I had a USB memory stick that was coming out of the case so I made a new cover for it using a Dremel & some 2x2 LEGO pieces. Things You Need: USB flash driveDremelDrill & Routing bits for your Dremel2x2 LEGO bricks--enough to cover your memory stick completely2 2x2 LEGO platesTacky GlueSafety ...
By: micreatespace

Continue Reading »]]>
Mon, 25 Aug 2014 13:15:58 PDT
Almost-Macro for gopro (focus from closer distance) http://www.instructables.com/id/Almost-Macro-for-gopro-focus-from-closer-distance/
Almost-Macro for gopro (focus from closer distance) - More DIY How To Projects]]> http://cdn.instructables.com/FAH/9I71/HZ88NT14/FAH9I71HZ88NT14.SQUARE2.jpg http://cdn.instructables.com/FAH/9I71/HZ88NT14/FAH9I71HZ88NT14.SQUARE.jpg http://cdn.instructables.com/FAH/9I71/HZ88NT14/FAH9I71HZ88NT14.SMALL.jpg Greaven This is an easy trick to make your gopro focus from almost 2x shorter distance. Things you may need;- A dremel tool with pvc cutting blade- A glue gun- Bottle cap from an air-wick electric air freshener- Lens from a cheap led headlight (most of them use plano-convex lenses, make sure the lens you us...
By: Greaven

Continue Reading »]]>
Sun, 24 Aug 2014 13:38:13 PDT
Engraved Acrylic with LED Lights at MauiMakers! http://www.instructables.com/id/Engraved-Acrylic-with-LED-Lights-at-MauiMakers/
Engraved Acrylic with LED Lights at MauiMakers! - More DIY How To Projects]]> http://cdn.instructables.com/F53/97FR/HYR3G9G9/F5397FRHYR3G9G9.SQUARE2.jpg http://cdn.instructables.com/F53/97FR/HYR3G9G9/F5397FRHYR3G9G9.SQUARE.jpg http://cdn.instructables.com/F53/97FR/HYR3G9G9/F5397FRHYR3G9G9.SMALL.jpg mauigolightly This project was created during the Maui Makers “Dremel Build Day” with the help of some awesome Maui Makers (Brian, Lorayne, Laura, Jerry, and everyone else in attendance!). I learned how to use the Dremel rotary and multi-max tools and came home with some fun new art!Bonus... Hurricane Iselle and ...
By: mauigolightly

Continue Reading »]]>
Tue, 12 Aug 2014 20:25:57 PDT
Pantograph with Dremel http://www.instructables.com/id/Pantograph-with-Dremel/
Pantograph with Dremel - More DIY How To Projects]]> http://cdn.instructables.com/F9Y/Z5PN/HY7T2WOF/F9YZ5PNHY7T2WOF.SQUARE2.jpg http://cdn.instructables.com/F9Y/Z5PN/HY7T2WOF/F9YZ5PNHY7T2WOF.SQUARE.jpg http://cdn.instructables.com/F9Y/Z5PN/HY7T2WOF/F9YZ5PNHY7T2WOF.SMALL.jpg makeict In July of 2014 MakeICT had the good fortune to hold an instructables build night workshop with Dremel tools. The Dremel company sent us several very nice high speed rotary tools. We decided to experiment with one and create a duplicating mechanism which is sometimes called a panthograph. Several sh...
By: makeict

Continue Reading »]]>
Tue, 29 Jul 2014 20:29:01 PDT
Star Trek LED Insignia http://www.instructables.com/id/Star-Trek-LED-Insignia/
Star Trek LED Insignia - More DIY How To Projects]]> http://cdn.instructables.com/FO1/UELC/HUVS4ZE4/FO1UELCHUVS4ZE4.SQUARE2.jpg http://cdn.instructables.com/FO1/UELC/HUVS4ZE4/FO1UELCHUVS4ZE4.SQUARE.jpg http://cdn.instructables.com/FO1/UELC/HUVS4ZE4/FO1UELCHUVS4ZE4.SMALL.jpg transistorguy Its a pretty straight forward construction, I just wanted to show off my latest project!All it took was a piece of acrylic engraved with a dremel, a piece of wood as a base, and 3 LEDs.
By: transistorguy

Continue Reading »]]>
Mon, 5 May 2014 09:19:40 PDT
Oscillating Tool Steak Carving Knife http://www.instructables.com/id/Oscillating-Tool-Steak-Carving-Knife/
Oscillating Tool Steak Carving Knife - More DIY How To Projects]]> http://cdn.instructables.com/F65/03LG/HUMSAAQI/F6503LGHUMSAAQI.SQUARE2.jpg http://cdn.instructables.com/F65/03LG/HUMSAAQI/F6503LGHUMSAAQI.SQUARE.jpg http://cdn.instructables.com/F65/03LG/HUMSAAQI/F6503LGHUMSAAQI.SMALL.jpg caitlinsdad Steak knife? Zombie knife? Make this custom FOOD blade attachment for your oscillating power tool. DISCLAIMER: This is Fn dangerous to make as it is to use. Don't try this at home. Mechanical details... You need a few things: First, your oscillating power tool. You might notice there a...
By: caitlinsdad

Continue Reading »]]>
Wed, 30 Apr 2014 19:56:54 PDT
Rotary Tool Organizer made with a Laser Cutter http://www.instructables.com/id/Rotary-Tool-Organizer-made-with-a-Laser-Printer/
Rotary Tool Organizer made with a Laser Cutter - More DIY How To Projects]]> http://cdn.instructables.com/FQR/8EER/HTDSQ2WN/FQR8EERHTDSQ2WN.SQUARE2.jpg http://cdn.instructables.com/FQR/8EER/HTDSQ2WN/FQR8EERHTDSQ2WN.SQUARE.jpg http://cdn.instructables.com/FQR/8EER/HTDSQ2WN/FQR8EERHTDSQ2WN.SMALL.jpg dogtooth Here is my rotary tool organizer.   It consists of a wood  box and a set of removable trays that hold the rotary bits.  All the parts were cut on the the laser with the exception of the latch hardware,  which was made on a 3d printer. I made it at Techshop:   http:www.techshop.ws Materials and ...
By: dogtooth

Continue Reading »]]>
Sun, 30 Mar 2014 13:14:00 PDT
My portable workstation http://www.instructables.com/id/My-portable-workstation/
My portable workstation - More DIY How To Projects]]> http://cdn.instructables.com/FPA/RCQB/HRN4DSPS/FPARCQBHRN4DSPS.SQUARE2.jpg http://cdn.instructables.com/FPA/RCQB/HRN4DSPS/FPARCQBHRN4DSPS.SQUARE.jpg http://cdn.instructables.com/FPA/RCQB/HRN4DSPS/FPARCQBHRN4DSPS.SMALL.jpg fiero79 This is my portable work station for small electronics hobby building. I will include a 12 Volt power supply from SLA batteries,a Dremel(knockoff), soldering iron, rechargeable battery, cigarette lighter outlet, voltage display, wall wart to recharge the batteries, a helping hand, and a way to hea...
By: fiero79

Continue Reading »]]>
Thu, 27 Mar 2014 00:16:19 PDT
Replacing Buttons on a Game System or Controller http://www.instructables.com/id/Replacing-Buttons-on-a-Game-System-or-Controller/ http://cdn.instructables.com/F6N/4C6R/HT3E0DJ5/F6N4C6RHT3E0DJ5.SQUARE2.jpg http://cdn.instructables.com/F6N/4C6R/HT3E0DJ5/F6N4C6RHT3E0DJ5.SQUARE.jpg http://cdn.instructables.com/F6N/4C6R/HT3E0DJ5/F6N4C6RHT3E0DJ5.SMALL.jpg FossilFolk In this video, I replaced some poorly designed soft contact style buttons with hard tactile button on the directional pad of a Sudoku game system. This process will also work for TV or other remote controllers, video game controllers (especially older ones), or any other device with the soft style b...
By: FossilFolk

Continue Reading »]]>
Sun, 23 Mar 2014 15:58:32 PDT
CD name plate http://www.instructables.com/id/CD-name-plate/
CD name plate - More DIY How To Projects]]> http://cdn.instructables.com/FHY/GMOD/HPG4MP6P/FHYGMODHPG4MP6P.SQUARE2.jpg http://cdn.instructables.com/FHY/GMOD/HPG4MP6P/FHYGMODHPG4MP6P.SQUARE.jpg http://cdn.instructables.com/FHY/GMOD/HPG4MP6P/FHYGMODHPG4MP6P.SMALL.jpg Kale_3d Make a custom name plate from a CD Materials You will need:- A CD- An engraver, dremel, or other rotary tool- Cardboard- A flashlight- Glue or tape Engrave the CD Use the engraver or dremel to cut out your name on the CD Make the cardboard mount Cut a slit through the card board, then cut a...
By: Kale_3d

Continue Reading »]]>
Sat, 21 Dec 2013 17:44:02 PST
Altoids Tin USB Hub 2.0 http://www.instructables.com/id/Altoids-Tin-USB-Hub-20/ http://cdn.instructables.com/FE0/0NBB/HP0CJ082/FE00NBBHP0CJ082.SQUARE2.jpg http://cdn.instructables.com/FE0/0NBB/HP0CJ082/FE00NBBHP0CJ082.SQUARE.jpg http://cdn.instructables.com/FE0/0NBB/HP0CJ082/FE00NBBHP0CJ082.SMALL.jpg sean_sylvester1 This is an update of my Altoids tin USB hub. I added a 5V green LED (available at radio shack) that lights up when it is plugged in. Make sure to check out my original project. -For those of you who have built the original project feel free to drill a hole in your tin and connect an LED to the unus...
By: sean_sylvester1

Continue Reading »]]>
Thu, 12 Dec 2013 15:02:12 PST
Dremel pointer for precise shaping http://www.instructables.com/id/Dremel-pointer-for-precise-shaping/
Dremel pointer for precise shaping - More DIY How To Projects]]> http://cdn.instructables.com/F36/9OZD/HOUG7A8W/F369OZDHOUG7A8W.SQUARE2.jpg http://cdn.instructables.com/F36/9OZD/HOUG7A8W/F369OZDHOUG7A8W.SQUARE.jpg http://cdn.instructables.com/F36/9OZD/HOUG7A8W/F369OZDHOUG7A8W.SMALL.jpg assemblyrequired Whenever I am attempting to Dremel a finer piece at a specific height, I use a Dremel mounted to a special table that mounts onto the workbench. However, if the Dremel bit does not go all the way through the piece, I cannot see where my bit is cutting. To solve this, I created a pointer that will al...
By: assemblyrequired

Continue Reading »]]>
Mon, 9 Dec 2013 14:21:16 PST
Altoids Tin USB Hub http://www.instructables.com/id/Altoids-Tin-USB-Hub/
Altoids Tin USB Hub - More DIY How To Projects]]> http://cdn.instructables.com/F79/4HBA/HO23AKG8/F794HBAHO23AKG8.SQUARE2.jpg http://cdn.instructables.com/F79/4HBA/HO23AKG8/F794HBAHO23AKG8.SQUARE.jpg http://cdn.instructables.com/F79/4HBA/HO23AKG8/F794HBAHO23AKG8.SMALL.jpg sean_sylvester1 This is a 3 port usb hub with a flexible male port leading out. The entire thing is very simple to build and is a fun hardware hack. The hub is also built into an altoids tin, now you'll get some hilarious looks from people when they see you plugging your flash drive into an altoids tin! make sure ...
By: sean_sylvester1

Continue Reading »]]>
Sun, 17 Nov 2013 10:25:54 PST
My Home Made Dremel or Rotary Tool http://www.instructables.com/id/My-Home-Made-Dremel-or-Rotary-Tool/ http://cdn.instructables.com/FKB/13CY/HI3U0GUL/FKB13CYHI3U0GUL.SQUARE2.jpg http://cdn.instructables.com/FKB/13CY/HI3U0GUL/FKB13CYHI3U0GUL.SQUARE.jpg http://cdn.instructables.com/FKB/13CY/HI3U0GUL/FKB13CYHI3U0GUL.SMALL.jpg Mahmoud Alaa    This is my second able about making pcb drill , sander  , dremel...etc , after my Frist one . Here is the things that i used to make this dremel : -6v Motor -wires -push switch -9v battery clip  -sand paper and hotglue  for making the heads  - that metal piece (found it ) The best thing is it ...
By: Mahmoud Alaa

Continue Reading »]]>
Wed, 19 Jun 2013 04:38:14 PDT
USB Powered Micro Sander! http://www.instructables.com/id/USB-Powered-Micro-Sander/
USB Powered Micro Sander! - More DIY How To Projects]]> http://cdn.instructables.com/F57/F4HX/HCLBWU3U/F57F4HXHCLBWU3U.SQUARE2.jpg http://cdn.instructables.com/F57/F4HX/HCLBWU3U/F57F4HXHCLBWU3U.SQUARE.jpg http://cdn.instructables.com/F57/F4HX/HCLBWU3U/F57F4HXHCLBWU3U.SMALL.jpg Verticees Hello Everyone!              In this Instructable  I will show you how to make a small but powerful sander, that fits right in your pocket. It is made out of components from old, broken electronics. I did not buy a single thing while making this project. The sander is super easy to make and takes le...
By: Verticees

Continue Reading »]]>
Sat, 2 Feb 2013 19:39:56 PST
TheMaker2 Homemade CNC http://www.instructables.com/id/TheMaker2-Homemade-CNC/ http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SQUARE2.jpg http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SQUARE.jpg http://cdn.instructables.com/F0Y/QUR9/HLSH8VSF/F0YQUR9HLSH8VSF.SMALL.jpg msaleiro Hi! In this instructable I'm going to show you my second homemade CNC: TheMaker2. In order to build a more robust structure I decided not to build it with a moving gantry, but with a moving table on x axis and a fixed structure for y axis, which holds z axis. To make a CNC like this one I had to use...
By: msaleiro

Continue Reading »]]>
Tue, 23 Oct 2012 20:12:21 PDT
Hack your battery dremel to a wired one http://www.instructables.com/id/Hack-your-battery-dremel-to-a-wired-one/
Hack your battery dremel to a wired one - More DIY How To Projects]]> http://cdn.instructables.com/F7I/N62F/H6S49K0F/F7IN62FH6S49K0F.SQUARE2.jpg http://cdn.instructables.com/F7I/N62F/H6S49K0F/F7IN62FH6S49K0F.SQUARE.jpg http://cdn.instructables.com/F7I/N62F/H6S49K0F/F7IN62FH6S49K0F.SMALL.jpg ALazyazzpanda Hello every I’m ALazyAzzPanda here, to so post my first instructable EVER WOOT WOOT!!! This instructble will show you how to turn a cordless (battery powered) Dremel to have an always ready energy source to it. You may be wondering “Why would you do that?”. Well at the time I started using it I onl...
By: ALazyazzpanda

Continue Reading »]]>
Sun, 9 Sep 2012 17:01:25 PDT
Acrylic Boombox http://www.instructables.com/id/Acrylic-Boombox/
Acrylic Boombox - More DIY How To Projects]]> http://cdn.instructables.com/F2D/PAFN/H5TVB7KG/F2DPAFNH5TVB7KG.SQUARE2.jpg http://cdn.instructables.com/F2D/PAFN/H5TVB7KG/F2DPAFNH5TVB7KG.SQUARE.jpg http://cdn.instructables.com/F2D/PAFN/H5TVB7KG/F2DPAFNH5TVB7KG.SMALL.jpg SharadScience This Boombox was created for my friend with mostly recycled parts. The story is that I owed my friend big time, so I took his old car speakers he wasn’t using and decided to make something useful. Below is how I had initially thought how it should be constructed. Now with this design, I realized th...
By: SharadScience

Continue Reading »]]>
Sat, 18 Aug 2012 23:46:24 PDT
Retro Wireless Apple Mouse http://www.instructables.com/id/Retro-Wireless-Apple-Mouse/
Retro Wireless Apple Mouse - More DIY How To Projects]]> http://cdn.instructables.com/FT2/4LWE/H5TUCB38/FT24LWEH5TUCB38.SQUARE2.jpg http://cdn.instructables.com/FT2/4LWE/H5TUCB38/FT24LWEH5TUCB38.SQUARE.jpg http://cdn.instructables.com/FT2/4LWE/H5TUCB38/FT24LWEH5TUCB38.SMALL.jpg UnconventionalHacker It's been a while since we created our last Instructable but we're back! In this guide, you'll learn how to put an old wired Apple ADB mouse to good use with upgraded wireless capabilities! Don't forget vote for us in the Fix & Improve it Contest and to visit our blog: http://www.unconventionalhacke...
By: UnconventionalHacker

Continue Reading »]]>
Tue, 14 Aug 2012 08:54:35 PDT
Reuse old power station for your projects http://www.instructables.com/id/Reuse-old-power-station-for-your-projects/ http://cdn.instructables.com/FTZ/3O86/H337KKYW/FTZ3O86H337KKYW.SQUARE2.jpg http://cdn.instructables.com/FTZ/3O86/H337KKYW/FTZ3O86H337KKYW.SQUARE.jpg http://cdn.instructables.com/FTZ/3O86/H337KKYW/FTZ3O86H337KKYW.SMALL.jpg SpMcqueen use power station for your projects by hooking up all your tools to make your projects quicker and easier
By: SpMcqueen

Continue Reading »]]>
Mon, 11 Jun 2012 15:53:10 PDT
Upgrade a 4.8v Dremel to 6v for more speed and power. http://www.instructables.com/id/Upgrade-a-48v-Dremel-to-6v-for-more-speed-and-pow/ http://cdn.instructables.com/FKH/9X2Z/H0OJ0UVU/FKH9X2ZH0OJ0UVU.SQUARE2.jpg http://cdn.instructables.com/FKH/9X2Z/H0OJ0UVU/FKH9X2ZH0OJ0UVU.SQUARE.jpg http://cdn.instructables.com/FKH/9X2Z/H0OJ0UVU/FKH9X2ZH0OJ0UVU.SMALL.jpg carpespasm Where I work we often have need for a dremel tool, and the one we have at our store has always been pretty weak. Rebuilding it's battery (which is made of 4 NiMH AA cells did help some but it was still really weak when you went into anything strong. I was going to hook up a similar battery while cha...
By: carpespasm

Continue Reading »]]>
Sun, 15 Apr 2012 19:59:45 PDT
Simple CNC Machine http://www.instructables.com/id/Simple-CNC-Machine/
Simple CNC Machine - More DIY How To Projects]]> http://cdn.instructables.com/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SQUARE2.jpg http://cdn.instructables.com/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SQUARE.jpg http://cdn.instructables.com/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SMALL.jpg koff1979 What I'm going to try and show you in this instructable is how to build a simple CNC machine. Now when I say Simple I mean you only require basic tools & materials to build the machine. The machine is made out of Sawn Timber, drawer sliders, nema 17 Stepper motors, a TB6560 Driver Controller Board...
By: koff1979

Continue Reading »]]>
Mon, 27 Feb 2012 13:51:21 PST
Pinewood Derby Police car http://www.instructables.com/id/Pinewood-Derby-Police-car/
Pinewood Derby Police car - More DIY How To Projects]]> http://cdn.instructables.com/FW3/YZ03/GZ0BW77H/FW3YZ03GZ0BW77H.SQUARE2.jpg http://cdn.instructables.com/FW3/YZ03/GZ0BW77H/FW3YZ03GZ0BW77H.SQUARE.jpg http://cdn.instructables.com/FW3/YZ03/GZ0BW77H/FW3YZ03GZ0BW77H.SMALL.jpg shaggs31 It's Pinewood Derby season!  This year I am building one with an arduino chip inside.  This car has LED head and tail lights.  Also it has red and blue flashing lights that are controlled by the arduino chip. I'll show you how to build one of your own. Prep and parts list First thing we need t...
By: shaggs31

Continue Reading »]]>
Mon, 27 Feb 2012 13:22:38 PST
Replacing the batteries on a dremel Stylus http://www.instructables.com/id/Replacing-the-batteries-on-a-dremel-Stylus/
Replacing the batteries on a dremel Stylus - More DIY How To Projects]]> http://cdn.instructables.com/FLQ/BGNZ/GY4RAHH8/FLQBGNZGY4RAHH8.SQUARE2.jpg http://cdn.instructables.com/FLQ/BGNZ/GY4RAHH8/FLQBGNZGY4RAHH8.SQUARE.jpg http://cdn.instructables.com/FLQ/BGNZ/GY4RAHH8/FLQBGNZGY4RAHH8.SMALL.jpg ekaggrat I had burnt one of the cells in the dremel stylus by overcharging them ( faulty base charger )... I tried looking for replacement batteries on the dremel site but found none for the stylus.. So i looked for similar batteries and found 3.6v single cell 2400 mAh batteries from sanyo which could be a ...
By: ekaggrat

Continue Reading »]]>
Sat, 4 Feb 2012 01:58:09 PST
Faca suas proprias lixas para Dremel Multimax ou similares - Do yourself Dremel's Multimax sandpaper http://www.instructables.com/id/Faca-suas-proprias-lixas-para-Dremel-Multimax-ou-s/
Faca suas proprias lixas para Dremel Multimax ou similares - Do yourself Dremel's Multimax sandpaper - More DIY How To Projects]]> http://cdn.instructables.com/FAW/ELCY/GW88LD4P/FAWELCYGW88LD4P.SQUARE2.jpg http://cdn.instructables.com/FAW/ELCY/GW88LD4P/FAWELCYGW88LD4P.SQUARE.jpg http://cdn.instructables.com/FAW/ELCY/GW88LD4P/FAWELCYGW88LD4P.SMALL.jpg rcaproni ****** In portuguese (BR) and english (ENG). ****** (BR) Recentemente adquiri uma ferramenta vibratória Dremel Multimax. A ferramenta é excelente, servindo muito bem aos propósitos de um usuário hobbysta como eu. Infelizmente, até o presente momento (dez/2011), essa ferramenta não é vendida no Bras...
By: rcaproni

Continue Reading »]]>
Thu, 22 Dec 2011 10:45:26 PST
Building a drawer slide CNC machine for under $200! http://www.instructables.com/id/Building-a-drawer-slide-CNC-machine-for-under-200/ http://cdn.instructables.com/FE6/1Y88/GUKAROPQ/FE61Y88GUKAROPQ.SQUARE2.jpg http://cdn.instructables.com/FE6/1Y88/GUKAROPQ/FE61Y88GUKAROPQ.SQUARE.jpg http://cdn.instructables.com/FE6/1Y88/GUKAROPQ/FE61Y88GUKAROPQ.SMALL.jpg CopperDropDesigns <br> Drawer Slide CNC Machine for under $200   Like many of us interested in this hobby, I wanted my own machine. B...
By: CopperDropDesigns

Continue Reading »]]>
Wed, 9 Nov 2011 20:48:38 PST
Instala LEDs en el pedal de tu amplificador. http://www.instructables.com/id/Instala-LEDs-en-el-pedal-de-tu-amplificador/
Instala LEDs en el pedal de tu amplificador. - More DIY How To Projects]]> http://cdn.instructables.com/FTV/Y7ZT/GU7F3D38/FTVY7ZTGU7F3D38.SQUARE2.jpg http://cdn.instructables.com/FTV/Y7ZT/GU7F3D38/FTVY7ZTGU7F3D38.SQUARE.jpg http://cdn.instructables.com/FTV/Y7ZT/GU7F3D38/FTVY7ZTGU7F3D38.SMALL.jpg curbowman Si tienes un amplificador de guitarra o de bajo, el pedal (footswitch) es un accesorio esencial que te brinda la posibilidad de cambiar los canales y/o activar el lazo de efectos sin tener que apartar tus manos de las cuerdas para presionar un botón en tu amplificador. Sin embargo, la mayoría de los...
By: curbowman

Continue Reading »]]>
Mon, 31 Oct 2011 12:38:04 PDT
Etched Design on X-Plorer Window http://www.instructables.com/id/Etched-Design-on-X-Plorer-Window/ http://cdn.instructables.com/FIV/9J63/GSLF1J0J/FIV9J63GSLF1J0J.SQUARE2.jpg http://cdn.instructables.com/FIV/9J63/GSLF1J0J/FIV9J63GSLF1J0J.SQUARE.jpg http://cdn.instructables.com/FIV/9J63/GSLF1J0J/FIV9J63GSLF1J0J.SMALL.jpg bkjkhker This is a project me and a friend did quite a while ago. We simply printed a picture off of the Internet, traced it onto the *outside* of the case, flipped it over and routed out the inside with a dremele with a routing attatchent and router bit. You can easily edge light this using a few LED's, and...
By: bkjkhker

Continue Reading »]]>
Thu, 15 Sep 2011 14:49:09 PDT
Microchip Keychain in less than 5 minutes !!! http://www.instructables.com/id/Microchip-Keychain-in-less-than-5-minutes-/
Microchip Keychain in less than 5 minutes !!! - More DIY How To Projects]]> http://cdn.instructables.com/FZF/LEG5/GS3BFED5/FZFLEG5GS3BFED5.SQUARE2.jpg http://cdn.instructables.com/FZF/LEG5/GS3BFED5/FZFLEG5GS3BFED5.SQUARE.jpg http://cdn.instructables.com/FZF/LEG5/GS3BFED5/FZFLEG5GS3BFED5.SMALL.jpg MikeyUM Hi everyone, I was cleaning my office and I found some microchips they were burned, so instead of throwing them I just decide to make some fun keychain, to everyone can know you are a guy of computers hahaha !!! What you need ? 1 Plier 1 Old Microchip (Not Working) 1 Keychain metals. 1 Dremel 5 M...
By: MikeyUM

Continue Reading »]]>
Mon, 12 Sep 2011 16:39:56 PDT
Warrior's Talon Claw Shaving Mirror "UNBREAKABLE" http://www.instructables.com/id/Warriors-Talon-Claw-Shaving-Mirror-UNBREAKABLE/
Warrior's Talon Claw Shaving Mirror "UNBREAKABLE" - More DIY How To Projects]]> http://cdn.instructables.com/F9A/H7OL/GS3BEIM0/F9AH7OLGS3BEIM0.SQUARE2.jpg http://cdn.instructables.com/F9A/H7OL/GS3BEIM0/F9AH7OLGS3BEIM0.SQUARE.jpg http://cdn.instructables.com/F9A/H7OL/GS3BEIM0/F9AH7OLGS3BEIM0.SMALL.jpg LifeWarrior Lately I've been endeavoring to get back to the gym and start getting back into shape; One thing that is a daily ritual after a good workout is a shower and a shave (Shaving in a hot shower is great to reduce razors bumps but just no mirrors so I always have to bring one with me)  I guess I'm a litt...
By: LifeWarrior

Continue Reading »]]>
Fri, 9 Sep 2011 02:11:56 PDT
Xbox Original Desktop PC http://www.instructables.com/id/Xbox-Original-Desktop-PC/ http://cdn.instructables.com/FCV/8PW4/GRTHXO35/FCV8PW4GRTHXO35.SQUARE2.jpg http://cdn.instructables.com/FCV/8PW4/GRTHXO35/FCV8PW4GRTHXO35.SQUARE.jpg http://cdn.instructables.com/FCV/8PW4/GRTHXO35/FCV8PW4GRTHXO35.SMALL.jpg tylak eBay link: http://www.ebay.com/itm/250926812679?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Hey everyone this is my first instructable. I hope I dont do so bad. I apologize for not making this into a step by step but I thought about taking pictures once I was almost done. After many inspi...
By: tylak

Continue Reading »]]>
Sun, 28 Aug 2011 00:05:44 PDT
Make A Lego USB Drive! http://www.instructables.com/id/Make-A-Lego-USB-Drive/
Make A Lego USB Drive! - More DIY How To Projects]]> http://cdn.instructables.com/FCC/4RC8/GP2DLES0/FCC4RC8GP2DLES0.SQUARE2.jpg http://cdn.instructables.com/FCC/4RC8/GP2DLES0/FCC4RC8GP2DLES0.SQUARE.jpg http://cdn.instructables.com/FCC/4RC8/GP2DLES0/FCC4RC8GP2DLES0.SMALL.jpg PopsicleGhoul Have you ever thought your usb drive had a junky case, or was it cracked?  Well, this is the place for you!  In this Instructable, I will show you how to make a really cool LEGO (or Mega blok) usb flash drive.  It is moderately easy, and should only take an hour or less.  Be sure to wear proper safe...
By: PopsicleGhoul

Continue Reading »]]>
Mon, 20 Jun 2011 06:11:52 PDT
Dremel 395- Not working, repair http://www.instructables.com/id/Dremel-395-Not-working-repair/
Dremel 395- Not working, repair - More DIY How To Projects]]> http://cdn.instructables.com/FGA/5UI7/GNFSK8A0/FGA5UI7GNFSK8A0.SQUARE2.jpg http://cdn.instructables.com/FGA/5UI7/GNFSK8A0/FGA5UI7GNFSK8A0.SQUARE.jpg http://cdn.instructables.com/FGA/5UI7/GNFSK8A0/FGA5UI7GNFSK8A0.SMALL.jpg treflip My Dremel 395 quit working when I was twisting the wire counter-clockwise to get it into my z-axis mount. I read on the forum where someone tested 6.5/7 ohms between the stator wires. One of mine was broke so I fixed it! I hope someone else can use this to fix theirs too. First determine if ...
By: treflip

Continue Reading »]]>
Mon, 9 May 2011 22:39:03 PDT
Nokia Charger to iPod charger http://www.instructables.com/id/Nokia-Charger-iPod-charger/ http://cdn.instructables.com/FQI/VS2E/GL4Z4C8I/FQIVS2EGL4Z4C8I.SQUARE2.jpg http://cdn.instructables.com/FQI/VS2E/GL4Z4C8I/FQIVS2EGL4Z4C8I.SQUARE.jpg http://cdn.instructables.com/FQI/VS2E/GL4Z4C8I/FQIVS2EGL4Z4C8I.SMALL.jpg rupin.chheda I converted a Nokia Charger to allow me to charge USB devices like iPods and iPhone. Please use these instructions at your own risk.I would not be liable for any damage or any consequences! My inspiration came from this information-http://www.ladyada.net/make/mintyboost/icharge.html Parts List 1) ...
By: rupin.chheda

Continue Reading »]]>
Sun, 13 Mar 2011 07:09:50 PDT
How to Make a Homemade Dremel Tool http://www.instructables.com/id/How-to-make-a-homemade-dremel-tool-Pt-12/
How to Make a Homemade Dremel Tool - More DIY How To Projects]]> http://cdn.instructables.com/F7O/OF0G/GL4Z69KL/F7OOF0GGL4Z69KL.SQUARE2.jpg http://cdn.instructables.com/F7O/OF0G/GL4Z69KL/F7OOF0GGL4Z69KL.SQUARE.jpg http://cdn.instructables.com/F7O/OF0G/GL4Z69KL/F7OOF0GGL4Z69KL.SMALL.jpg EngineerJakit If there's one thing that any crafty person, like myself, hates more than getting some inspiration for something cool to make, its not having the right tool to use to make that cool thing. One tool that i can think of that many with a low budget would love to have is a dremel. Since i can't use my s...
By: EngineerJakit

Continue Reading »]]>
Sat, 12 Mar 2011 18:31:18 PST
Moleskine nook color case http://www.instructables.com/id/Moleskine-nook-color-case/
Moleskine nook color case - More DIY How To Projects]]> http://cdn.instructables.com/FNU/SR29/GKAYXQ1Q/FNUSR29GKAYXQ1Q.SQUARE2.jpg http://cdn.instructables.com/FNU/SR29/GKAYXQ1Q/FNUSR29GKAYXQ1Q.SQUARE.jpg http://cdn.instructables.com/FNU/SR29/GKAYXQ1Q/FNUSR29GKAYXQ1Q.SMALL.jpg mydian_nightshade      First off I'd like to note that there are tons of really nice nook & nook color cases out there for cheaper than the material costs for this project. They're designed by professionals and made by companies who do lots of testing because they don't like being sued when customers return broken e...
By: mydian_nightshade

Continue Reading »]]>
Fri, 18 Feb 2011 14:58:00 PST
Jesus LED Acrilico (plexiglas) http://www.instructables.com/id/Jesus-LED-Acrilico-plexiglas/
Jesus LED Acrilico (plexiglas) - More DIY How To Projects]]> http://cdn.instructables.com/FZL/XG3D/GK3TO1RN/FZLXG3DGK3TO1RN.SQUARE2.jpg http://cdn.instructables.com/FZL/XG3D/GK3TO1RN/FZLXG3DGK3TO1RN.SQUARE.jpg http://cdn.instructables.com/FZL/XG3D/GK3TO1RN/FZLXG3DGK3TO1RN.SMALL.jpg shd128 Regalo para la abuela de mi novio, la cual es muy religiosa. //Gift for my boyfriend's grandma, who is very religious. Primero que nada, los materiales: //First of all, what you'll need: -Un minitorno (en mi caso un dremel 300 series, con una punta bien fina) //A dremel (in my case a Dremel 300 Se...
By: shd128

Continue Reading »]]>
Sun, 13 Feb 2011 12:38:10 PST
Cell phone Desktop Stand http://www.instructables.com/id/Desktop-Cell-phone-Stand/
Cell phone Desktop Stand - More DIY How To Projects]]> http://cdn.instructables.com/F6Z/FKX7/GI0TG855/F6ZFKX7GI0TG855.SQUARE2.jpg http://cdn.instructables.com/F6Z/FKX7/GI0TG855/F6ZFKX7GI0TG855.SQUARE.jpg http://cdn.instructables.com/F6Z/FKX7/GI0TG855/F6ZFKX7GI0TG855.SMALL.jpg Diabloscope i was thinking instead of my phone just lying on my desk / PC Station ,I can make a stand to prop my phone up , so away i went to the garage and in less than 10 minutes i came back with an  A frame style stand pretty basic i thought and easy , a week went by testing the stand of its flaws and how ...
By: Diabloscope

Continue Reading »]]>
Mon, 27 Dec 2010 04:11:31 PST
One Man, One Dremel, and One DREAMel - How to Make Amazing POI LED Toys Using Recycled Plastic Drink Bottles / Containers http://www.instructables.com/id/One-Man-One-Dremel-and-One-DREAMel-How-to-Make/
One Man, One Dremel, and One DREAMel - How to Make Amazing POI LED Toys Using Recycled Plastic Drink Bottles / Containers - More DIY How To Projects]]> http://cdn.instructables.com/FZI/WUKN/GHHIM6VD/FZIWUKNGHHIM6VD.SQUARE2.jpg http://cdn.instructables.com/FZI/WUKN/GHHIM6VD/FZIWUKNGHHIM6VD.SQUARE.jpg http://cdn.instructables.com/FZI/WUKN/GHHIM6VD/FZIWUKNGHHIM6VD.SMALL.jpg ice_k99 Hey There!, This instructable is intended to show the average household American how to prepare, assemble, and use your own custom Poi LED toys - 75% of which all of the materials required are made from your average day-to-day household items! Poi LEDS, in short, resemble and are similar to what m...
By: ice_k99

Continue Reading »]]>
Mon, 13 Dec 2010 06:51:04 PST
DC Generator Made From A Dremel http://www.instructables.com/id/DC-Generator-Made-From-A-Dremel/
DC Generator Made From A Dremel - More DIY How To Projects]]> http://cdn.instructables.com/F1R/S9TB/GHDSNC7S/F1RS9TBGHDSNC7S.SQUARE2.jpg http://cdn.instructables.com/F1R/S9TB/GHDSNC7S/F1RS9TBGHDSNC7S.SQUARE.jpg http://cdn.instructables.com/F1R/S9TB/GHDSNC7S/F1RS9TBGHDSNC7S.SMALL.jpg hackmattr Even though a Dremel is used as a tool, I figured I would use it for another useful purpose. Generating electricity. As proof of concept, I attached it to a gas powered scooter. Video is shown Above.... This dremel tool still works great, the only problem is that the battery pack stopped holding a...
By: hackmattr

Continue Reading »]]>
Wed, 8 Dec 2010 10:45:07 PST
animatronic hand statue http://www.instructables.com/id/animatronic-hand-statue/
animatronic hand statue - More DIY How To Projects]]> http://cdn.instructables.com/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SQUARE2.jpg http://cdn.instructables.com/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SQUARE.jpg http://cdn.instructables.com/FMZ/BU8A/GGPF4VSO/FMZBU8AGGPF4VSO.SMALL.jpg iminthebathroom Welcome to my instructable on animatronic hand building. Addition to the section on the crank shaft build! Addition to the section on the fingers addition to the section on tumbling I was going for a rough industrial look from a bygone era.  Solenoids and servo's are the easy way to go...
By: iminthebathroom

Continue Reading »]]>
Sun, 28 Nov 2010 22:30:57 PST
Car Audio Cassette Deck iPhone Stand http://www.instructables.com/id/Car-Audio-Cassette-Deck-iPhone-Stand/
Car Audio Cassette Deck iPhone Stand - More DIY How To Projects]]> http://cdn.instructables.com/FIR/KVV1/GFRWPETZ/FIRKVV1GFRWPETZ.SQUARE2.jpg http://cdn.instructables.com/FIR/KVV1/GFRWPETZ/FIRKVV1GFRWPETZ.SQUARE.jpg http://cdn.instructables.com/FIR/KVV1/GFRWPETZ/FIRKVV1GFRWPETZ.SMALL.jpg aymans Really...do you still have a cassette deck in your car.  I know I do.  Ever notice how the cassette kinda sticks out but is held firmly when its ejected.  It makes a perfect iPhone 4.0 stand.  All it takes is a cassette you don't care about and a Dremel.   Assemble your stuff You'll need a cla...
By: aymans

Continue Reading »]]>
Sat, 6 Nov 2010 18:35:29 PDT
Make Your Own LED Wedding Table Cards http://www.instructables.com/id/Make-Your-Own-LED-Wedding-Table-Cards/
Make Your Own LED Wedding Table Cards - More DIY How To Projects]]> http://cdn.instructables.com/F8N/TWWD/GDEA4U90/F8NTWWDGDEA4U90.SQUARE2.jpg http://cdn.instructables.com/F8N/TWWD/GDEA4U90/F8NTWWDGDEA4U90.SQUARE.jpg http://cdn.instructables.com/F8N/TWWD/GDEA4U90/F8NTWWDGDEA4U90.SMALL.jpg JerseyJ For years I've been drawn to stuff that lights up.  Maybe it was all the glow-in-the-dark toys they made back in the 80's.  Maybe I'm just part moth.  Whatever the case, when I started planning for my wedding I knew that I wanted to make something myself that was unique and lit up and looked awesome...
By: JerseyJ

Continue Reading »]]>
Sun, 29 Aug 2010 19:19:39 PDT
Build a furniture quality Laptop Stand and TV Tray http://www.instructables.com/id/Build-a-furniture-quality-Laptop-Stand-and-TV-Tray/
Build a furniture quality Laptop Stand and TV Tray - More DIY How To Projects]]> http://cdn.instructables.com/FY7/G1DH/FPBKYEOS/FY7G1DHFPBKYEOS.SQUARE2.jpg http://cdn.instructables.com/FY7/G1DH/FPBKYEOS/FY7G1DHFPBKYEOS.SQUARE.jpg http://cdn.instructables.com/FY7/G1DH/FPBKYEOS/FY7G1DHFPBKYEOS.SMALL.jpg Greg Pless An easy to build and assemble Laptop Stand/TV Tray that will become an integral part of your living room. With an adjustable tilt top, it can adjust to hold a laptop computer at the perfect typing angle, or go flat to hold a glass and plate for a meal in front of the TV. The parts are readily availa...
By: Greg Pless

Continue Reading »]]>
Tue, 20 Apr 2010 10:11:05 PDT
Upgrade your original 1984 Macintosh to run OS X Snow Leopard. http://www.instructables.com/id/Upgrade-your-original-1984-Macintosh-to-run-OS-X-S/
Upgrade your original 1984 Macintosh to run OS X Snow Leopard. - More DIY How To Projects]]> http://cdn.instructables.com/FAW/YY7R/G69MVR5F/FAWYY7RG69MVR5F.SQUARE2.jpg http://cdn.instructables.com/FAW/YY7R/G69MVR5F/FAWYY7RG69MVR5F.SQUARE.jpg http://cdn.instructables.com/FAW/YY7R/G69MVR5F/FAWYY7RG69MVR5F.SMALL.jpg gmjhowe The original Macintosh took the the world by storm with its small form factor, and above standard speeds. This project aims to show you how to upgrade your original 1984 macintosh to the specification of a modern day machine. The original Macintosh had an 8mhz processor, my upgrades will boost it t...
By: gmjhowe

Continue Reading »]]>
Sun, 7 Mar 2010 13:58:47 PST
Awesome LED Edge-lit Desktop Nameplate http://www.instructables.com/id/Awesome-LED-Edge-lit-Desktop-Nameplate/
Awesome LED Edge-lit Desktop Nameplate - More DIY How To Projects]]> http://cdn.instructables.com/FKF/IZW9/G68H8MB6/FKFIZW9G68H8MB6.SQUARE2.jpg http://cdn.instructables.com/FKF/IZW9/G68H8MB6/FKFIZW9G68H8MB6.SQUARE.jpg http://cdn.instructables.com/FKF/IZW9/G68H8MB6/FKFIZW9G68H8MB6.SMALL.jpg klbrockmann You'd be hard pressed to an office with a desktop that doesn't have a nameplate. This DIY project transforms the classic engraved vinyl nameplate into a high tech piece of art. It’s the perfect way to spice up anyone's desk at home or at work. The concept of this project is simple; engrave a name o...
By: klbrockmann

Continue Reading »]]>
Tue, 2 Mar 2010 05:09:02 PST
Mini drill press for free. http://www.instructables.com/id/Mini-drill-press-for-free/
Mini drill press for free. - More DIY How To Projects]]> http://cdn.instructables.com/FMV/98HN/G61AS45L/FMV98HNG61AS45L.SQUARE2.jpg http://cdn.instructables.com/FMV/98HN/G61AS45L/FMV98HNG61AS45L.SQUARE.jpg http://cdn.instructables.com/FMV/98HN/G61AS45L/FMV98HNG61AS45L.SMALL.jpg amando96  Hi guys, i was moving around bits and bobs of stuff i've gathered a long the years, most parts where from printers, scanners, and fax machines, i got two rails, 3 nylon sliders, add a dremel, some zip ties, i got some wood from an old cupboard that broke, and some springs also found in printers, et...
By: amando96

Continue Reading »]]>
Fri, 26 Feb 2010 12:11:43 PST