Instructables: exploring - technology - game - featured http://www.instructables.com Sun, 11 Dec 2016 06:22:48 PST BLOX v1.01 TapTap LED http://www.instructables.com/id/TapTap-LED/
TapTap LED - More DIY How To Projects]]> https://cdn.instructables.com/F9D/5OWA/IWGXRVEH/F9D5OWAIWGXRVEH.SQUARE2.jpg https://cdn.instructables.com/F9D/5OWA/IWGXRVEH/F9D5OWAIWGXRVEH.SQUARE.jpg https://cdn.instructables.com/F9D/5OWA/IWGXRVEH/F9D5OWAIWGXRVEH.SMALL.jpg jackieyoungs TapTap LED was created to address the serious decline of reaction time in the general public. Think about it, nowadays you're always watching something on TV, playing a game on your phone, or watching videos on Facebook; you're always getting an overload of visual stimuli with no required response!...
By: jackieyoungs

Continue Reading »]]>
Thu, 8 Dec 2016 16:02:27 PST
Pacman On A String http://www.instructables.com/id/Pacman-on-a-String/
Pacman On A String - More DIY How To Projects]]> https://cdn.instructables.com/F2N/SQW0/IWI0LZ0H/F2NSQW0IWI0LZ0H.SQUARE2.jpg https://cdn.instructables.com/F2N/SQW0/IWI0LZ0H/F2NSQW0IWI0LZ0H.SQUARE.jpg https://cdn.instructables.com/F2N/SQW0/IWI0LZ0H/F2NSQW0IWI0LZ0H.SMALL.jpg RaymondX Well it is not exactly a Pac-man, but it basically moves along a long LED strip to collect good things and avoid bad things. So you get the idea!A group of middle-school kids have been learning and playing Arduino, NodeMCU and MQTT with me over the weekends, and as I heard about a Maker-Faire event,...
By: RaymondX

Continue Reading »]]>
Fri, 9 Dec 2016 11:51:32 PST
Arduino Pinball Machine http://www.instructables.com/id/Arduino-Pinball-Machine/
Arduino Pinball Machine - More DIY How To Projects]]> https://cdn.instructables.com/FOY/GLR7/IWE4P2UA/FOYGLR7IWE4P2UA.SQUARE2.jpg https://cdn.instructables.com/FOY/GLR7/IWE4P2UA/FOYGLR7IWE4P2UA.SQUARE.jpg https://cdn.instructables.com/FOY/GLR7/IWE4P2UA/FOYGLR7IWE4P2UA.SMALL.jpg mnl_cntn This instructable was created in fulfillment of the project requirement of the Makecourse-Art at the University of South Florida (www.makecourse-art.com) Cut the Wood Using half inch plywood, cut two 19" by 6" pieces with a one inch slope. The front-most piece is 10" by 5" and the back piece is 1...
By: mnl_cntn

Continue Reading »]]>
Thu, 8 Dec 2016 06:46:41 PST
The Petanquemeter http://www.instructables.com/id/The-Petanquemeter/
The Petanquemeter - More DIY How To Projects]]> https://cdn.instructables.com/FDU/1BSQ/IVO3KVG9/FDU1BSQIVO3KVG9.SQUARE2.jpg https://cdn.instructables.com/FDU/1BSQ/IVO3KVG9/FDU1BSQIVO3KVG9.SQUARE.jpg https://cdn.instructables.com/FDU/1BSQ/IVO3KVG9/FDU1BSQIVO3KVG9.SMALL.jpg Matlek Hi guys,In this article I'll show you my first Arduino project, so be indulgent ;) It helped me a lot in understanding the Arduino board, because it is a project that uses many common sensors and technics (such as the ultrasonic sensor, a push button debouncing, a LCD screen...). It is based on a ga...
By: Matlek

Continue Reading »]]>
Mon, 21 Nov 2016 08:46:02 PST
Game O Verre ! Play with your glasses ! [DIY version] http://www.instructables.com/id/Game-O-Verre-Play-With-Your-Glasses-DIY-Version/
Game O Verre ! Play with your glasses ! [DIY version] - More DIY How To Projects]]> https://cdn.instructables.com/FC4/O1TS/IVMPY6SD/FC4O1TSIVMPY6SD.SQUARE2.jpg https://cdn.instructables.com/FC4/O1TS/IVMPY6SD/FC4O1TSIVMPY6SD.SQUARE.jpg https://cdn.instructables.com/FC4/O1TS/IVMPY6SD/FC4O1TSIVMPY6SD.SMALL.jpg LeoMarius The "Game O Verre" (GOV) is a new kind of game controller, it allow you to play games with your favorite action : Drinking !How does it work ? It's easy ! Build your own Game O Verre set (this Instructables will help you for) Install your GOV on your favorite glass Connect to the ele...
By: LeoMarius

Continue Reading »]]>
Thu, 17 Nov 2016 15:24:36 PST
DIY A Raspberry Game - 2048 http://www.instructables.com/id/DIY-a-Raspberry-Game-2048/
DIY A Raspberry Game - 2048 - More DIY How To Projects]]> https://cdn.instructables.com/FCX/2SRT/IVA4TGYB/FCX2SRTIVA4TGYB.SQUARE2.jpg https://cdn.instructables.com/FCX/2SRT/IVA4TGYB/FCX2SRTIVA4TGYB.SQUARE.jpg https://cdn.instructables.com/FCX/2SRT/IVA4TGYB/FCX2SRTIVA4TGYB.SMALL.jpg Seeed Studio Game 【2048】is a single-player sliding block puzzle game by Italian web developer Gabriele Cirulli. 2048 was originally written in JavaScript and CSS during a weekend, and released on March 9, 2014, as free and open-source software subject to the MIT license. The game's objective is to slide numbered...
By: Seeed Studio

Continue Reading »]]>
Fri, 11 Nov 2016 08:22:55 PST
Binary Game http://www.instructables.com/id/Binary-Game/
Binary Game - More DIY How To Projects]]> https://cdn.instructables.com/F3G/9ASL/IV0B3V9Y/F3G9ASLIV0B3V9Y.SQUARE2.jpg https://cdn.instructables.com/F3G/9ASL/IV0B3V9Y/F3G9ASLIV0B3V9Y.SQUARE.jpg https://cdn.instructables.com/F3G/9ASL/IV0B3V9Y/F3G9ASLIV0B3V9Y.SMALL.jpg keebie81 This is a game I created on Autodesk Circuits to learn binary numbers. A playable online version can be found at https://circuits.io/circuits/2924784-binary-gameIf you want to follow along with this guide and build your own the files and code can be found on my github at https://github.com/keebie81/...
By: keebie81

Continue Reading »]]>
Sun, 6 Nov 2016 17:35:17 PST
DIY Raspberry Pi Zero Handheld Game Console http://www.instructables.com/id/DIY-Raspberry-Pi-Zero-Handheld-Game-Console/
DIY Raspberry Pi Zero Handheld Game Console - More DIY How To Projects]]> https://cdn.instructables.com/FW1/WMF8/IUSM1QP7/FW1WMF8IUSM1QP7.SQUARE2.jpg https://cdn.instructables.com/FW1/WMF8/IUSM1QP7/FW1WMF8IUSM1QP7.SQUARE.jpg https://cdn.instructables.com/FW1/WMF8/IUSM1QP7/FW1WMF8IUSM1QP7.SMALL.jpg GreatScottLab In this project I will show you how I used a Raspberry Pi Zero, NiMH batteries, a homemade over-discharge protection circuit, a rearview lcd and an audio amp to create a handheld game console that can play retro games. Let's get started! Watch the videos! The first video will show you how the ele...
By: GreatScottLab

Continue Reading »]]>
Sun, 30 Oct 2016 08:45:44 PDT
Flappy Bird on ATtiny85 and OLED Display SSD1306 http://www.instructables.com/id/Flappy-Bird-on-ATtiny85-and-OLED-Display-SSD1306/
Flappy Bird on ATtiny85 and OLED Display SSD1306 - More DIY How To Projects]]> https://cdn.instructables.com/F39/AMKJ/IUKEV6ML/F39AMKJIUKEV6ML.SQUARE2.jpg https://cdn.instructables.com/F39/AMKJ/IUKEV6ML/F39AMKJIUKEV6ML.SQUARE.jpg https://cdn.instructables.com/F39/AMKJ/IUKEV6ML/F39AMKJIUKEV6ML.SMALL.jpg AlexFW Hey Everyone,Today I'm going to show you a basic flappy bird clone that I created, and how you can go about making a similar game. I'll essentially run through my code with you and explain how it works every step of the way. This game is built to run on an ATtiny85 clocked at 1MHz, with an I2C OLED ...
By: AlexFW

Continue Reading »]]>
Sun, 23 Oct 2016 15:09:56 PDT
Lego Arcade Game Box http://www.instructables.com/id/Lego-Arcade-Game-Box/
Lego Arcade Game Box - More DIY How To Projects]]> https://cdn.instructables.com/F99/TIKC/IUG0POFZ/F99TIKCIUG0POFZ.SQUARE2.jpg https://cdn.instructables.com/F99/TIKC/IUG0POFZ/F99TIKCIUG0POFZ.SQUARE.jpg https://cdn.instructables.com/F99/TIKC/IUG0POFZ/F99TIKCIUG0POFZ.SMALL.jpg Goodmornin Hey everyone, this is my first instructable and I'm going to show a way to make a cool Lego display that can be used in a variety of ways. In my case, it hosts arcade games.This project isn't too hard to assemble but it's clean and has endless possibilities in terms of coding after the initial const...
By: Goodmornin

Continue Reading »]]>
Wed, 19 Oct 2016 13:12:18 PDT
Arcade Spielekonsole Mit Raspberry Pi http://www.instructables.com/id/Arcade-Spielekonsole-Mit-Raspberry-Pi/
Arcade Spielekonsole Mit Raspberry Pi - More DIY How To Projects]]> https://cdn.instructables.com/FN7/5N7J/IUDWFNZQ/FN75N7JIUDWFNZQ.SQUARE2.jpg https://cdn.instructables.com/FN7/5N7J/IUDWFNZQ/FN75N7JIUDWFNZQ.SQUARE.jpg https://cdn.instructables.com/FN7/5N7J/IUDWFNZQ/FN75N7JIUDWFNZQ.SMALL.jpg LarsH23 In dieser Anleitung zeige ich euch, wie man eine einfache Spielekonsole für Spieleklassiker und Arcade-Spiele selbst baut. Als Konsole kommt ein Raspberry Pi mit entsprechender Software zum Einsatz.Ich übernehme keine Gewährleistung für diese Anleitung. Benötigte Materialien 72,52€ Joystick, Knö...
By: LarsH23

Continue Reading »]]>
Mon, 17 Oct 2016 04:49:15 PDT
How To make an HTC vive with Google Cardboard http://www.instructables.com/id/How-to-Make-an-HTC-Vive-With-Google-Cardboard/
How To make an HTC vive with Google Cardboard - More DIY How To Projects]]> https://cdn.instructables.com/FW5/KEIE/IUHMQROP/FW5KEIEIUHMQROP.SQUARE2.jpg https://cdn.instructables.com/FW5/KEIE/IUHMQROP/FW5KEIEIUHMQROP.SQUARE.jpg https://cdn.instructables.com/FW5/KEIE/IUHMQROP/FW5KEIEIUHMQROP.SMALL.jpg ryan422 Today i am going to show you how to closely emulate and HTC Vive for Under $100.You will be able to play SteamVR games like The Lab and Job Simulator. Supplies Needed You will need • Basic-Medium understanding of computer and gaming software. • A way to mount the controller to your HeadsetHardw...
By: ryan422

Continue Reading »]]>
Fri, 30 Sep 2016 19:50:09 PDT
Mini Wire Loop Game http://www.instructables.com/id/Mini-Wire-Loop-Game/
Mini Wire Loop Game - More DIY How To Projects]]> https://cdn.instructables.com/FII/SS8Y/ITKJBQNK/FIISS8YITKJBQNK.SQUARE2.jpg https://cdn.instructables.com/FII/SS8Y/ITKJBQNK/FIISS8YITKJBQNK.SQUARE.jpg https://cdn.instructables.com/FII/SS8Y/ITKJBQNK/FIISS8YITKJBQNK.SMALL.jpg chienline It was my last project where I broke the solder pad of my Arduino Pro Mini "RAW pin". I was having a basketball shootout game before I came back to my soldering project. Then I soldered on the wrong pin and I have to desoldered and finally I broke the pad on RAW pin.Our hands will be trembling after...
By: chienline

Continue Reading »]]>
Thu, 29 Sep 2016 02:13:10 PDT
How to make Ladder game using ATtiny13a and mini breadboard. http://www.instructables.com/id/How-to-Make-Ladder-Game-Using-ATtiny13a-and-Mini-B/
How to make Ladder game using ATtiny13a and mini breadboard. - More DIY How To Projects]]> https://cdn.instructables.com/F9L/NS41/ITKLIC16/F9LNS41ITKLIC16.SQUARE2.jpg https://cdn.instructables.com/F9L/NS41/ITKLIC16/F9LNS41ITKLIC16.SQUARE.jpg https://cdn.instructables.com/F9L/NS41/ITKLIC16/F9LNS41ITKLIC16.SMALL.gif SANUKI UDON I made the game that I used 12 LED for using breadboard and ATtiny13a.I can buy ATtiny13a in a half dollar in Japan. It is a very cheap microcomputer. Memory is low and 1KByte.I challenged the making of Ladder game in 1KByte. Sketch I wrote in a program at ATtiny13a using Arduino IDE used versio...
By: SANUKI UDON

Continue Reading »]]>
Wed, 28 Sep 2016 06:48:20 PDT
Baby high chair light game Arduino http://www.instructables.com/id/Arduino-Baby-High-Chair-Light-Game/
Baby high chair light game Arduino - More DIY How To Projects]]> https://cdn.instructables.com/FC0/KK2Q/ITKJ0TP4/FC0KK2QITKJ0TP4.SQUARE2.jpg https://cdn.instructables.com/FC0/KK2Q/ITKJ0TP4/FC0KK2QITKJ0TP4.SQUARE.jpg https://cdn.instructables.com/FC0/KK2Q/ITKJ0TP4/FC0KK2QITKJ0TP4.SMALL.jpg Thomas sxt It is never easy to keep a baby busy and safe without you looking all the time.The purpose of this project is to create a playful high chair for kid of all age ! The main project of this tutorial is to setup a game , when the baby press a button the light of the same color turn on and a sound is pla...
By: Thomas sxt

Continue Reading »]]>
Tue, 27 Sep 2016 06:45:02 PDT
Single line LED display Games http://www.instructables.com/id/Single-Line-LED-Display-Games/
Single line LED display Games - More DIY How To Projects]]> https://cdn.instructables.com/FW0/KZ9A/IRXT01YJ/FW0KZ9AIRXT01YJ.SQUARE2.jpg https://cdn.instructables.com/FW0/KZ9A/IRXT01YJ/FW0KZ9AIRXT01YJ.SQUARE.jpg https://cdn.instructables.com/FW0/KZ9A/IRXT01YJ/FW0KZ9AIRXT01YJ.SMALL.jpg RonM9 aka LED Ladder Display Game System. An Attiny-85 outfitted with hardware and software to play action packed "video" games, on a in-line LED display. It has a multiplexed 12 LED ladder display, and supports up to 6 button inputs and an optional audio output.It is packed with 4 games of skill, with mu...
By: RonM9

Continue Reading »]]>
Wed, 17 Aug 2016 23:02:08 PDT
How to make Simon Says using ATtiny13a and mini breadboard. http://www.instructables.com/id/How-to-Make-Simon-Says-Using-ATtiny13a-and-Mini-Br/
How to make Simon Says using ATtiny13a and mini breadboard. - More DIY How To Projects]]> https://cdn.instructables.com/F27/VZH0/IRXT5B7F/F27VZH0IRXT5B7F.SQUARE2.jpg https://cdn.instructables.com/F27/VZH0/IRXT5B7F/F27VZH0IRXT5B7F.SQUARE.jpg https://cdn.instructables.com/F27/VZH0/IRXT5B7F/F27VZH0IRXT5B7F.SMALL.jpg SANUKI UDON I made the game that I used 12 LED for in ATtiny13a.The memory of ATtiny13a is very little with 1KB.I tried the challenge I make games in 1 KB.I made very small Simon Say using ATtiny13a and the mini breadboard. Circuit diagram Circuit diagram is using a large breadboard :-)Material1x ATtiny13a...
By: SANUKI UDON

Continue Reading »]]>
Thu, 18 Aug 2016 06:23:21 PDT
Electro-Flare ...from X-COM: UFO Defense http://www.instructables.com/id/Electro-Flare-from-X-COM-UFO-Defense/
Electro-Flare ...from X-COM: UFO Defense - More DIY How To Projects]]> https://cdn.instructables.com/FR0/LN6R/IRXT8ZSN/FR0LN6RIRXT8ZSN.SQUARE2.jpg https://cdn.instructables.com/FR0/LN6R/IRXT8ZSN/FR0LN6RIRXT8ZSN.SQUARE.jpg https://cdn.instructables.com/FR0/LN6R/IRXT8ZSN/FR0LN6RIRXT8ZSN.SMALL.jpg Troublemakers Before we start. An explanation of what this thing is, and why we built it, is in order. It starts back in the early 90’s… 1993 to be exact. A video game was released called… X-COM: Enemy Unknown. In 1994 the game was released in the North America as X-COM: UFO Defense.The by-line read "Extrem...
By: Troublemakers

Continue Reading »]]>
Wed, 17 Aug 2016 15:18:14 PDT
Cowboy Duel Game http://www.instructables.com/id/Cowboy-Duel-Game/
Cowboy Duel Game - More DIY How To Projects]]> https://cdn.instructables.com/F0P/GSJV/IRPPOBJH/F0PGSJVIRPPOBJH.SQUARE2.jpg https://cdn.instructables.com/F0P/GSJV/IRPPOBJH/F0PGSJVIRPPOBJH.SQUARE.jpg https://cdn.instructables.com/F0P/GSJV/IRPPOBJH/F0PGSJVIRPPOBJH.SMALL.jpg SanderDoomen Welcome visitor!I made this project for school(HKU Games&Interaction, Netherlands). With the idea to mix laser cut wood with technology(Arduino Yún) and make a small game out of it. My inspiration was a small mini game from Kirby on the NES. Which has this cowboy duel mini-game. The idea is that two...
By: SanderDoomen

Continue Reading »]]>
Thu, 11 Aug 2016 07:56:50 PDT
Matrix Game Console With Arduino for Beginner http://www.instructables.com/id/Matrix-Game-Console-With-Arduino-for-Beginner/
Matrix Game Console With Arduino for Beginner - More DIY How To Projects]]> https://cdn.instructables.com/FQ8/OBPR/IQE1ZNR4/FQ8OBPRIQE1ZNR4.SQUARE2.jpg https://cdn.instructables.com/FQ8/OBPR/IQE1ZNR4/FQ8OBPRIQE1ZNR4.SQUARE.jpg https://cdn.instructables.com/FQ8/OBPR/IQE1ZNR4/FQ8OBPRIQE1ZNR4.SMALL.jpg YiyiY This is a very simple Game console powered by an Arduino Microcontroller board. It is a fun project to begin with, and all the components are usually covered within any Arduino beginner pack. The one I will display only has all the basic element of the endless possibilities this type of game console...
By: YiyiY

Continue Reading »]]>
Sat, 9 Jul 2016 06:14:01 PDT
Touch LED table - Retrogaming and ambiant light http://www.instructables.com/id/Touch-LED-Table-Retrogaming-and-Ambiant-Light/
Touch LED table - Retrogaming and ambiant light - More DIY How To Projects]]> https://cdn.instructables.com/F22/9VMW/IPQM99NS/F229VMWIPQM99NS.SQUARE2.jpg https://cdn.instructables.com/F22/9VMW/IPQM99NS/F229VMWIPQM99NS.SQUARE.jpg https://cdn.instructables.com/F22/9VMW/IPQM99NS/F229VMWIPQM99NS.SMALL.jpg arbalet_project Arbalet is an ARduino-BAsed LED Table, a flat surface filled with several hundreds of coloured square lights designed for Education, Geeks, and Pleasure. With its limited number of pixels and a DIY touch interface, Arbalet brings our old 80's arcad games back into fashion through a modern, classy,...
By: arbalet_project

Continue Reading »]]>
Wed, 22 Jun 2016 03:56:59 PDT
Curie-Powered Dice http://www.instructables.com/id/Curie-Powered-Dice/
Curie-Powered Dice - More DIY How To Projects]]> https://cdn.instructables.com/FLS/QR6K/ION6NP4G/FLSQR6KION6NP4G.SQUARE2.jpg https://cdn.instructables.com/FLS/QR6K/ION6NP4G/FLSQR6KION6NP4G.SQUARE.jpg https://cdn.instructables.com/FLS/QR6K/ION6NP4G/FLSQR6KION6NP4G.SMALL.jpg HowardT13 The goal of this project is to build a set of six-sided game dice with Curie-powered Arduino 101 boards inside. Each die uses the inertial measurement unit (IMU) that is built into Curie™ to determine the resulting values of the rolls. These results are sent to a game running on the PC via Bluetoo...
By: HowardT13

Continue Reading »]]>
Wed, 25 May 2016 19:22:34 PDT
The Simplest Buzzer Tutorial; Using Arduino http://www.instructables.com/id/The-Simplest-Buzzer-Tutorial-Using-Arduino/
The Simplest Buzzer Tutorial; Using Arduino - More DIY How To Projects]]> https://cdn.instructables.com/FFN/N906/IOIU7Z4D/FFNN906IOIU7Z4D.SQUARE2.jpg https://cdn.instructables.com/FFN/N906/IOIU7Z4D/FFNN906IOIU7Z4D.SQUARE.jpg https://cdn.instructables.com/FFN/N906/IOIU7Z4D/FFNN906IOIU7Z4D.SMALL.jpg miymakers Hey Makers,Lets make a Simple Quiz Buzzer using Arduino! ​What we can do with it? What we can do with it?Quiz Game BuzzerPlay Tunes and lots more…………. Things Required Arduino Uno (Buy From Amazon.in) (Buy From Amazon.com) Buzzer (Buy From Amazon.in) (Buy From Amazon.com) Switch (Buy From ...
By: miymakers

Continue Reading »]]>
Mon, 23 May 2016 09:41:16 PDT
WIRELESS GAMING CONSOLE USING HUMAN GESTURES http://www.instructables.com/id/WIRELESS-GAMING-CONSOLE-USING-HUMAN-GESTURES/
WIRELESS GAMING CONSOLE USING HUMAN GESTURES - More DIY How To Projects]]> https://cdn.instructables.com/FT7/3EDH/IOFZASYP/FT73EDHIOFZASYP.SQUARE2.jpg https://cdn.instructables.com/FT7/3EDH/IOFZASYP/FT73EDHIOFZASYP.SQUARE.jpg https://cdn.instructables.com/FT7/3EDH/IOFZASYP/FT73EDHIOFZASYP.SMALL.jpg AXR AMAR watch this video ! this is a 2d game in this project we are going to build 2D game and Hardware to control game wirelessly using gestures. To build Hardware and Software Gesture based Game controller and Game design Guide....(both Hardware and software !!) Introduction Now a days virtual envir...
By: AXR AMAR

Continue Reading »]]>
Sat, 21 May 2016 03:04:25 PDT
Flat Pack Tic-Tac-ToeBot http://www.instructables.com/id/Flat-Pack-Tic-Tac-ToeBot/
Flat Pack Tic-Tac-ToeBot - More DIY How To Projects]]> https://cdn.instructables.com/F1B/XDKL/IO8WBHNS/F1BXDKLIO8WBHNS.SQUARE2.jpg https://cdn.instructables.com/F1B/XDKL/IO8WBHNS/F1BXDKLIO8WBHNS.SQUARE.jpg https://cdn.instructables.com/F1B/XDKL/IO8WBHNS/F1BXDKLIO8WBHNS.SMALL.jpg PaulSS I decided to build this for my son mostly because I wanted to challenge myself and make him something fun, but also because I had left over components after a 3D printer build. How this works is the player will pick a square for the first move and then the computer will makes its selection. The 2 st...
By: PaulSS

Continue Reading »]]>
Sun, 15 May 2016 20:51:35 PDT
Interactive Survey Game http://www.instructables.com/id/Interactive-Survey-Game/
Interactive Survey Game - More DIY How To Projects]]> https://cdn.instructables.com/FF2/A9Y4/ITM7QD2T/FF2A9Y4ITM7QD2T.SQUARE2.jpg https://cdn.instructables.com/FF2/A9Y4/ITM7QD2T/FF2A9Y4ITM7QD2T.SQUARE.jpg https://cdn.instructables.com/FF2/A9Y4/ITM7QD2T/FF2A9Y4ITM7QD2T.SMALL.jpg jenfoxbot A survey questionnaire come to life! Use (nearly) any object to gather helpful data through an interactive, engaging, and fun multiple-choice survey.This project uses the Makey Makey microcontroller in combination with a Raspberry Pi computer to read in participants' survey choices and save the resu...
By: jenfoxbot

Continue Reading »]]>
Mon, 18 Apr 2016 08:22:53 PDT
USB GAME CONTROLLER FOR P.C http://www.instructables.com/id/USB-GAME-CONTROLLER-FOR-PC/
USB GAME CONTROLLER FOR P.C - More DIY How To Projects]]> https://cdn.instructables.com/FL8/KOJJ/IOIWCSEN/FL8KOJJIOIWCSEN.SQUARE2.jpg https://cdn.instructables.com/FL8/KOJJ/IOIWCSEN/FL8KOJJIOIWCSEN.SQUARE.jpg https://cdn.instructables.com/FL8/KOJJ/IOIWCSEN/FL8KOJJIOIWCSEN.SMALL.jpg techgeek17 A GAMING CONTROLLER FOR ANY GAME(ALMOST) INTRODUCTION In this instructable I am going to show you how you can make a U.S.B game controller using a keyboard and some other components MATERIALS REQUIRED 1. A Keyboard2. A Case( I am using a cassette case )3. Momentary switches 10 (+ 2 Optional ...
By: techgeek17

Continue Reading »]]>
Sat, 2 Apr 2016 07:56:48 PDT
Gaming With Thoughts/Mindwaves (w/ Arduino) http://www.instructables.com/id/Gaming-With-ThoughtsMindwaves-w-Arduino/
Gaming With Thoughts/Mindwaves (w/ Arduino) - More DIY How To Projects]]> https://cdn.instructables.com/FME/XG39/IMGJ8X1O/FMEXG39IMGJ8X1O.SQUARE2.jpg https://cdn.instructables.com/FME/XG39/IMGJ8X1O/FMEXG39IMGJ8X1O.SQUARE.jpg https://cdn.instructables.com/FME/XG39/IMGJ8X1O/FMEXG39IMGJ8X1O.SMALL.jpg Imetomi What do you think why we like videogames? The answer isn't hard: the videogames shows us new, extremly good challanges. I play videogames rarely, but my favorites are car racing and open world games just like Need for Speed and Grand Theft Auto series. Yes, these games are intrerestings, but after o...
By: Imetomi

Continue Reading »]]>
Thu, 31 Mar 2016 10:26:21 PDT
Arduino MINTIA - Game Console In A Candy Box http://www.instructables.com/id/Arduino-MINTIA-Game-Console-in-a-Candy-Box/
Arduino MINTIA - Game Console In A Candy Box - More DIY How To Projects]]> https://cdn.instructables.com/FI7/UIJS/IMF3WP8X/FI7UIJSIMF3WP8X.SQUARE2.jpg https://cdn.instructables.com/FI7/UIJS/IMF3WP8X/FI7UIJSIMF3WP8X.SQUARE.jpg https://cdn.instructables.com/FI7/UIJS/IMF3WP8X/FI7UIJSIMF3WP8X.SMALL.jpg 陳亮 This Instructables show you how to use a tiny candy box to create an Arduino color game console. Introduction to MINTIA MINTIA is a multi favor tablet produced by Asahi Group Food, Ltd. in Japan. The candy box design make it very easy to take one and only one tablet out when put off the cover, yo...
By: 陳亮

Continue Reading »]]>
Tue, 29 Mar 2016 08:03:06 PDT
How to make an android mobile game ? http://www.instructables.com/id/How-to-Make-an-Android-Mobile-Game-/
How to make an android mobile game ? - More DIY How To Projects]]> https://cdn.instructables.com/FXM/0KT9/IM0VQOJW/FXM0KT9IM0VQOJW.SQUARE2.jpg https://cdn.instructables.com/FXM/0KT9/IM0VQOJW/FXM0KT9IM0VQOJW.SQUARE.jpg https://cdn.instructables.com/FXM/0KT9/IM0VQOJW/FXM0KT9IM0VQOJW.SMALL.jpg prayag nao A game is structured form of play, usually undertaken for enjoyment and sometimes used as an educational tool.Playing games help us grow, think, and find solutions to problems.So Today i am going to make a game for android mobile.Note:This game will work with moblie phone having 5.5" screen and Andr...
By: prayag nao

Continue Reading »]]>
Mon, 21 Mar 2016 05:39:45 PDT
Arduino Shooting Game Arcade http://www.instructables.com/id/Arduino-Shooting-Game-Arcade/
Arduino Shooting Game Arcade - More DIY How To Projects]]> https://cdn.instructables.com/FCF/7TT4/ILV8L4R2/FCF7TT4ILV8L4R2.SQUARE2.jpg https://cdn.instructables.com/FCF/7TT4/ILV8L4R2/FCF7TT4ILV8L4R2.SQUARE.jpg https://cdn.instructables.com/FCF/7TT4/ILV8L4R2/FCF7TT4ILV8L4R2.SMALL.jpg Rahul - S Hello Friends,Welcome to my shooting range.This instructable is all about making your own Shooting Game within your budget. This setup cost me only approx. 15$ (1000INR)The project is now of alpha version.The animations and game, you are seeing in videos are preliminary. You can do many thing that y...
By: Rahul - S

Continue Reading »]]>
Mon, 14 Mar 2016 11:22:47 PDT
Crane Game Revival ! With Arduino. http://www.instructables.com/id/Crane-Game-Revival-With-Arduino/
Crane Game Revival ! With Arduino. - More DIY How To Projects]]> https://cdn.instructables.com/F2S/XU1I/ILFMDEPM/F2SXU1IILFMDEPM.SQUARE2.jpg https://cdn.instructables.com/F2S/XU1I/ILFMDEPM/F2SXU1IILFMDEPM.SQUARE.jpg https://cdn.instructables.com/F2S/XU1I/ILFMDEPM/F2SXU1IILFMDEPM.SMALL.jpg mechanoboyu Hi! I'm Noboyu.I often go to amusement arcade in Japan. I like the Crane game machine in particular.One day...I obtained a part of Crane game TOY in a junk shop,It was just throw away as unsold garbage. And that was the start of making crane game myself.The thing that I obtained was gearbox of Cran...
By: mechanoboyu

Continue Reading »]]>
Sun, 6 Mar 2016 06:16:10 PST
Pc Steering Wheel with Pedals. Turn Joystick to PC Gaming Wheel http://www.instructables.com/id/Pc-Steering-Wheel-With-Pedals-Turn-Joystick-to-PC-/
Pc Steering Wheel with Pedals. Turn Joystick to PC Gaming Wheel - More DIY How To Projects]]> https://cdn.instructables.com/F9S/72J4/ILCN8LS4/F9S72J4ILCN8LS4.SQUARE2.jpg https://cdn.instructables.com/F9S/72J4/ILCN8LS4/F9S72J4ILCN8LS4.SQUARE.jpg https://cdn.instructables.com/F9S/72J4/ILCN8LS4/F9S72J4ILCN8LS4.SMALL.jpg balsuryana Playing games is fun, arcade, adventure, rpg, racing and many more. Playing racing game is more fun then any game. But, playing racing games with Keyboard, mouse and joystick is Super Boring. :(So, for solve this problem, I make PC gaming steering wheel with pedals. :) PC Steeri...
By: balsuryana

Continue Reading »]]>
Thu, 3 Mar 2016 23:09:23 PST
Handheld Pong & Invaders on the cheap (Arduino compatible) http://www.instructables.com/id/Handheld-Pong-Invaders-on-the-Cheap-Arduino-Compat/
Handheld Pong & Invaders on the cheap (Arduino compatible) - More DIY How To Projects]]> https://cdn.instructables.com/F3P/X6BX/ILCHA454/F3PX6BXILCHA454.SQUARE2.jpg https://cdn.instructables.com/F3P/X6BX/ILCHA454/F3PX6BXILCHA454.SQUARE.jpg https://cdn.instructables.com/F3P/X6BX/ILCHA454/F3PX6BXILCHA454.SMALL.jpg Ugifer A retro hand-held gaming system cheap enough for a kids' project. Possible? Absolutely! Just bring on the power of Arduino and cheap Chinese components!This project was designed as a soldering project for a group of half-a-dozen 9 and 10 year-old kids but it's a great introduction to soldering, A...
By: Ugifer

Continue Reading »]]>
Thu, 3 Mar 2016 14:41:58 PST
GALAXIS - an Arduino Retro Game http://www.instructables.com/id/GALAXIS-an-Arduino-Retro-Game/
GALAXIS - an Arduino Retro Game - More DIY How To Projects]]> https://cdn.instructables.com/FJ1/WLAB/ILBGUZZE/FJ1WLABILBGUZZE.SQUARE2.jpg https://cdn.instructables.com/FJ1/WLAB/ILBGUZZE/FJ1WLABILBGUZZE.SQUARE.jpg https://cdn.instructables.com/FJ1/WLAB/ILBGUZZE/FJ1WLABILBGUZZE.SMALL.jpg JirkaJezek Galaxis is a retro logic game based on Galaxis original logic game from year 1980. I used to play many many years ago and now I make (someting like) it myself. This version is for 1 or 2 palyers, like original.Rules of game:you have to find 4 galaxies in array 1-9 and A-Gwho first finds all galaxies...
By: JirkaJezek

Continue Reading »]]>
Thu, 3 Mar 2016 00:09:17 PST
Arduino LED Rocker Game! http://www.instructables.com/id/Arduino-LED-Rocker-Game/
Arduino LED Rocker Game! - More DIY How To Projects]]> https://cdn.instructables.com/FGB/GZJI/IKWVEHKJ/FGBGZJIIKWVEHKJ.SQUARE2.jpg https://cdn.instructables.com/FGB/GZJI/IKWVEHKJ/FGBGZJIIKWVEHKJ.SQUARE.jpg https://cdn.instructables.com/FGB/GZJI/IKWVEHKJ/FGBGZJIIKWVEHKJ.SMALL.jpg Joe_barhouch This is a simple arduino game, pretty basic but insanely addictive. It's based on the blink without delay example of the Arduino website.To play, just open the Serial Monitor, and press the button when the middle LED turns on. You'll get three lives before you lose. GOOD LUCK!! MATERIAL You are g...
By: Joe_barhouch

Continue Reading »]]>
Mon, 22 Feb 2016 07:22:17 PST
Hacking SNES Pads to Make Arcade Style Controllers for Retropie http://www.instructables.com/id/Hacking-SNES-Pads-to-Make-Arcade-Style-Controllers/
Hacking SNES Pads to Make Arcade Style Controllers for Retropie - More DIY How To Projects]]> https://cdn.instructables.com/FK3/2FC3/IKWXEER2/FK32FC3IKWXEER2.SQUARE2.jpg https://cdn.instructables.com/FK3/2FC3/IKWXEER2/FK32FC3IKWXEER2.SQUARE.jpg https://cdn.instructables.com/FK3/2FC3/IKWXEER2/FK32FC3IKWXEER2.SMALL.jpg MrHermito Hi, and thanks for taking some time to read my amazing tutorial. My little sister's birthday is on February 25, she is turning 29 and I guess she started feeling a little bit old because she asked me to give her one of my Super Nintendos and a Super Mario World cartridge (I have 2 SNES and a SFC wit...
By: MrHermito

Continue Reading »]]>
Sun, 21 Feb 2016 17:22:12 PST
Motion Reactive Shake-the-Maze Game http://www.instructables.com/id/Motion-Reactive-Shake-the-Maze-Game/
Motion Reactive Shake-the-Maze Game - More DIY How To Projects]]> https://cdn.instructables.com/FWZ/W600/IKOAR315/FWZW600IKOAR315.SQUARE2.jpg https://cdn.instructables.com/FWZ/W600/IKOAR315/FWZW600IKOAR315.SQUARE.jpg https://cdn.instructables.com/FWZ/W600/IKOAR315/FWZW600IKOAR315.SMALL.jpg jenfoxbot Bring magic to life with an automated, motion reactive shake-the-maze game! Using components from an Arduino starter kit and common materials around the house, this is a customizable game to let you feel like a wizard while learning the ways of servo motors and light sensors.In this game, wave your ...
By: jenfoxbot

Continue Reading »]]>
Tue, 16 Feb 2016 07:12:16 PST
Mechatronic Basketball Shooter http://www.instructables.com/id/Mechatronic-Basketball-Shooter/
Mechatronic Basketball Shooter - More DIY How To Projects]]> https://cdn.instructables.com/FFU/QFMB/IJYURJMK/FFUQFMBIJYURJMK.SQUARE2.jpg https://cdn.instructables.com/FFU/QFMB/IJYURJMK/FFUQFMBIJYURJMK.SQUARE.jpg https://cdn.instructables.com/FFU/QFMB/IJYURJMK/FFUQFMBIJYURJMK.SMALL.jpg chienline Seeing my Arduino Arm (for Office Catapult) laying around, I was thinking "What else can I do with it?" At the moment I was having my Basketball ring renewed. I need to move my body a little, rather than just sitting in the office. Then this Mechatronic Basketball Shooter crossed my mind. I have an ...
By: chienline

Continue Reading »]]>
Sat, 30 Jan 2016 15:08:50 PST
Interactive Dungeon Board http://www.instructables.com/id/Interactive-Dungeon-Board/
Interactive Dungeon Board - More DIY How To Projects]]> https://cdn.instructables.com/FYX/8E1F/IJIUVDUL/FYX8E1FIJIUVDUL.SQUARE2.jpg https://cdn.instructables.com/FYX/8E1F/IJIUVDUL/FYX8E1FIJIUVDUL.SQUARE.jpg https://cdn.instructables.com/FYX/8E1F/IJIUVDUL/FYX8E1FIJIUVDUL.SMALL.jpg Jaap Bierman Ever wanted to take your dungeoneering experiences to the next level? Well, I have, and for me, building an interactive dungeon board was the way to go.The idea for this project came to be when I had to build something with arduino for a school project. I was about to play Dungeons and dragons for t...
By: Jaap Bierman

Continue Reading »]]>
Mon, 18 Jan 2016 06:32:20 PST
Simple Arduino LCD Game! http://www.instructables.com/id/Simple-Arduino-LCD-Game/
Simple Arduino LCD Game! - More DIY How To Projects]]> https://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SQUARE2.jpg https://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SQUARE.jpg https://cdn.instructables.com/FSG/IKG0/IJRFIEO8/FSGIKG0IJRFIEO8.SMALL.jpg Pure Carbon Hello World! Pure Carbon here and today I will be showing you how to make an extremely simple game that can be played on an LCD Button Shield for Arduino. Unfortunately its not actually a game because all you will be able to do is make a character walk back and forth using the buttons on the shield ...
By: Pure Carbon

Continue Reading »]]>
Sat, 23 Jan 2016 21:46:52 PST
Guitar Hero USB controller with Arduino and Java http://www.instructables.com/id/Guitar-Hero-USB-Controller-With-Arduino/
Guitar Hero USB controller with Arduino and Java - More DIY How To Projects]]> https://cdn.instructables.com/FZN/5US1/IJHJSWH7/FZN5US1IJHJSWH7.SQUARE2.jpg https://cdn.instructables.com/FZN/5US1/IJHJSWH7/FZN5US1IJHJSWH7.SQUARE.jpg https://cdn.instructables.com/FZN/5US1/IJHJSWH7/FZN5US1IJHJSWH7.SMALL.jpg rglszl I've been planning to create a Guitar Hero (or Frets on Fire) controller for a long time. A few weeks ago I found a guitar toy (with buttons on the neck, whammy bar and strum bar) at the local store discounted from about 5000 Hungarian Forints (approximately 20$ (USD)) to 2000 HUF (~7$), and I thoug...
By: rglszl

Continue Reading »]]>
Sun, 17 Jan 2016 10:00:43 PST
Arduino Simon Says Game http://www.instructables.com/id/Arduino-Simon-Says-Game-1/
Arduino Simon Says Game - More DIY How To Projects]]> https://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SQUARE2.jpg https://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SQUARE.jpg https://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SMALL.jpg cgaine This is a fun project I did with my kids over the holidays.To house this game I decided to use an old iPhone 5c box. I had it just lying around and it seemed about the right size.List of Components:(Note: all links are products I used at the time I built the game and may become out of date over tim...
By: cgaine

Continue Reading »]]>
Sat, 16 Jan 2016 19:10:11 PST
DIY Arduino Game Show Buttons http://www.instructables.com/id/DIY-Arduino-Game-Show-Buttons/
DIY Arduino Game Show Buttons - More DIY How To Projects]]> https://cdn.instructables.com/FIB/BLVE/IJ1PMKJS/FIBBLVEIJ1PMKJS.SQUARE2.jpg https://cdn.instructables.com/FIB/BLVE/IJ1PMKJS/FIBBLVEIJ1PMKJS.SQUARE.jpg https://cdn.instructables.com/FIB/BLVE/IJ1PMKJS/FIBBLVEIJ1PMKJS.SMALL.jpg Alexan24 How to make a Game Show Buttons using Arduino, cheap and easy, for unlimited fun!! Parts 3 Led (any colour)3 10kΩ resistors3 buttonsArduinoBreadboardJumper Wires Wire Up Wire up the circuit like the schematic. Code time!! Upload the code.You can add more players just by copying one part an...
By: Alexan24

Continue Reading »]]>
Wed, 6 Jan 2016 09:03:27 PST
Magic keyboard - Light installation http://www.instructables.com/id/Magic-Keyboard-Light-Installation/
Magic keyboard - Light installation - More DIY How To Projects]]> https://cdn.instructables.com/FFQ/YPTV/IIOZ0EDS/FFQYPTVIIOZ0EDS.SQUARE2.jpg https://cdn.instructables.com/FFQ/YPTV/IIOZ0EDS/FFQYPTVIIOZ0EDS.SQUARE.jpg https://cdn.instructables.com/FFQ/YPTV/IIOZ0EDS/FFQYPTVIIOZ0EDS.SMALL.gif pdubost In November 2012, I created a simple installation called Magic Keyboard. At the time, the project was only running on my laptop and wasn't ready to be opened on any device. Over the years there was a rising interest for the concept, and I felt it was a great idea to port it to the web with a simple ...
By: pdubost

Continue Reading »]]>
Mon, 28 Dec 2015 10:26:21 PST
KeyChainino - the First Game KeyChain Programmable With Arduino http://www.instructables.com/id/KeyChainino-the-First-Game-KeyChain-Programmable-W/
KeyChainino - the First Game KeyChain Programmable With Arduino - More DIY How To Projects]]> https://cdn.instructables.com/F2I/3QFG/IIJL03MA/F2I3QFGIIJL03MA.SQUARE2.jpg https://cdn.instructables.com/F2I/3QFG/IIJL03MA/F2I3QFGIIJL03MA.SQUARE.jpg https://cdn.instructables.com/F2I/3QFG/IIJL03MA/F2I3QFGIIJL03MA.SMALL.jpg alessandromatera KeyChainino is a vintage game keychain programmable with Arduino where anyone can upload his own game just with the Arduino IDE.If you really love Arcade Game, KeyChainino is for you!It doesn't have any LCDs, but only 30 LEDs controlled by the Atmel ATtiny84. Surely you understand that an 14 pins mi...
By: alessandromatera

Continue Reading »]]>
Thu, 24 Dec 2015 18:49:19 PST
Linkit ONE: LED Game http://www.instructables.com/id/Linkit-ONE-LED-Game/
Linkit ONE: LED Game - More DIY How To Projects]]> https://cdn.instructables.com/FSF/MMX6/IIG9ZB8H/FSFMMX6IIG9ZB8H.SQUARE2.jpg https://cdn.instructables.com/FSF/MMX6/IIG9ZB8H/FSFMMX6IIG9ZB8H.SQUARE.jpg https://cdn.instructables.com/FSF/MMX6/IIG9ZB8H/FSFMMX6IIG9ZB8H.SMALL.jpg CTbles LED Game Material ledswirelinkit onebreadboardresistorsand a tact switch Connecting and Coding The game uses a code from the arduino software. Before coding , use the picture to connect all the wires and leds and other materials. For it to run properly all connections must be made correctly. L...
By: CTbles

Continue Reading »]]>
Mon, 21 Dec 2015 21:02:06 PST
Star Wars themed retro arcade game http://www.instructables.com/id/Star-Wars-Themed-Retro-Arcade-Game/
Star Wars themed retro arcade game - More DIY How To Projects]]> https://cdn.instructables.com/FF8/XSAJ/IIGE7KPY/FF8XSAJIIGE7KPY.SQUARE2.jpg https://cdn.instructables.com/FF8/XSAJ/IIGE7KPY/FF8XSAJIIGE7KPY.SQUARE.jpg https://cdn.instructables.com/FF8/XSAJ/IIGE7KPY/FF8XSAJIIGE7KPY.SMALL.jpg ptkrf One button. LCD. Procedurally generated terrain. A dash of Star Wars. An addicting game.Not sure why, but I have been obsessed with art style of those pixelated retro arcade games. I just couldn't get enough and so I decided to make a simple arcade game for Arduino that would display graphics on a s...
By: ptkrf

Continue Reading »]]>
Mon, 21 Dec 2015 11:32:14 PST
Mexican Mayan Cipher Wheel http://www.instructables.com/id/Mexican-Mayan-Cipher-Wheel/
Mexican Mayan Cipher Wheel - More DIY How To Projects]]> https://cdn.instructables.com/FTK/KNU5/IIAOGOTJ/FTKKNU5IIAOGOTJ.SQUARE2.jpg https://cdn.instructables.com/FTK/KNU5/IIAOGOTJ/FTKKNU5IIAOGOTJ.SQUARE.jpg https://cdn.instructables.com/FTK/KNU5/IIAOGOTJ/FTKKNU5IIAOGOTJ.SMALL.jpg H2Powerman For years I have been interested in codes and spy gear. I built this Mayan Cipher Wheel adaption from a Mexican cipher wheel that had been used up until WWII. Thanks to my local community college they helped me laser cut this so I could use this for a live action RPG game I did for a friend and thei...
By: H2Powerman

Continue Reading »]]>
Thu, 17 Dec 2015 16:58:50 PST
Interactive Television Show Game http://www.instructables.com/id/Interactive-Television-Show-Game/
Interactive Television Show Game - More DIY How To Projects]]> https://cdn.instructables.com/FYO/2TZV/IIAMCPJJ/FYO2TZVIIAMCPJJ.SQUARE2.jpg https://cdn.instructables.com/FYO/2TZV/IIAMCPJJ/FYO2TZVIIAMCPJJ.SQUARE.jpg https://cdn.instructables.com/FYO/2TZV/IIAMCPJJ/FYO2TZVIIAMCPJJ.SMALL.jpg jegatheesan.soundarapandian Interactive TV is a tamil channel, Where we lot of programs and also interactive games by call the number and use the mobile button to play the game on the television. Want to do some thing like that for local cable TV for my friend. So using DTMF to catch the keypress and play the game in local pc ...
By: jegatheesan.soundarapandian

Continue Reading »]]>
Thu, 17 Dec 2015 23:25:11 PST