Instructables: exploring - technology - iphone - featured http://www.instructables.com Wed, 4 May 2016 20:03:33 PDT BLOX v1.01 Biking headwind monitor http://www.instructables.com/id/Biking-Headwind-Monitor/
Biking headwind monitor - More DIY How To Projects]]> http://cdn.instructables.com/F9G/7VH5/INNGN7F6/F9G7VH5INNGN7F6.SQUARE2.jpg http://cdn.instructables.com/F9G/7VH5/INNGN7F6/F9G7VH5INNGN7F6.SQUARE.jpg http://cdn.instructables.com/F9G/7VH5/INNGN7F6/F9G7VH5INNGN7F6.SMALL.jpg DaleL17 How to measure your wind resistance while cycling, so that you can see how hard you're really working!The Arduino reads the real-time airspeed as measured by a compact Pitot tube + airspeed sensor connected to analog input 0, and reports it back to the iOS app using Bluetooth LE. When the Pitot tube...
By: DaleL17

Continue Reading »]]>
Sat, 30 Apr 2016 21:38:04 PDT
Bluetooth PS2 Controller http://www.instructables.com/id/Bluetooth-PS2-Controller/
Bluetooth PS2 Controller - More DIY How To Projects]]> http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SQUARE2.jpg http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SQUARE.jpg http://cdn.instructables.com/F40/7XPZ/INKG7ACZ/F407XPZINKG7ACZ.SMALL.jpg EvanKale The original PlayStation 2 controller is still a solid and well-built controller by today's standards. Better yet, they can be had nowadays for a fraction of the cost of a controller with the same quality.Today we're bringing this 15-year-old controller back from the dead and turning it into a Bluet...
By: EvanKale

Continue Reading »]]>
Fri, 29 Apr 2016 08:14:19 PDT
DIY Snap-on Fisheye Lens Attachment for iPhone http://www.instructables.com/id/DIY-Snap-on-Fisheye-Lens-Attachment/
DIY Snap-on Fisheye Lens Attachment for iPhone - More DIY How To Projects]]> http://cdn.instructables.com/F8E/XVHR/INC0B968/F8EXVHRINC0B968.SQUARE2.jpg http://cdn.instructables.com/F8E/XVHR/INC0B968/F8EXVHRINC0B968.SQUARE.jpg http://cdn.instructables.com/F8E/XVHR/INC0B968/F8EXVHRINC0B968.SMALL.jpg manuelmasc Hi everyone! In this instructable I'm going to show you how to make a Fisheye lens attachment for your iPhone (or any other smartphone) using a cheap fisheye lense and an iPhone case.I know that this is not a innovative design and that you could buy the same object without doing what I did in this i...
By: manuelmasc

Continue Reading »]]>
Sat, 23 Apr 2016 07:21:31 PDT
The REAL iPhone Airplane Mode http://www.instructables.com/id/The-REAL-IPhone-Airplane-Mode/
The REAL iPhone Airplane Mode - More DIY How To Projects]]> http://cdn.instructables.com/F7P/8VL4/IN0EO7GG/F7P8VL4IN0EO7GG.SQUARE2.jpg http://cdn.instructables.com/F7P/8VL4/IN0EO7GG/F7P8VL4IN0EO7GG.SQUARE.jpg http://cdn.instructables.com/F7P/8VL4/IN0EO7GG/F7P8VL4IN0EO7GG.SMALL.jpg manuelmasc Hi everyone!In this Instructable I'm gonna show you how to make a cheap, easy and innovative mount for your smartphone using just a wooden strawberry box, 12cm of wooden rod, 6m of fishing wire and a bolt.A couple of months ago Nicolas Vuignier, a swiss guy, released a video on YouTube showing the "...
By: manuelmasc

Continue Reading »]]>
Thu, 14 Apr 2016 08:53:21 PDT
Bluetooth Keyboard Mouse Adapter http://www.instructables.com/id/Bluetooth-Keyboard-Mouse-Adapter/
Bluetooth Keyboard Mouse Adapter - More DIY How To Projects]]> http://cdn.instructables.com/FGM/5F20/IMQD5OCR/FGM5F20IMQD5OCR.SQUARE2.jpg http://cdn.instructables.com/FGM/5F20/IMQD5OCR/FGM5F20IMQD5OCR.SQUARE.jpg http://cdn.instructables.com/FGM/5F20/IMQD5OCR/FGM5F20IMQD5OCR.SMALL.jpg EvanKale Hey! This week's build is the Minion Bluetooth Keyboard Mouse Adapter!Plug in a standard keyboard or mouse and we'll be able to use them as a Bluetooth keyboard or mouse.It's also NFC enabled so we can directly tap to pair with a mobile device.So whether you're looking to turn your mobile device int...
By: EvanKale

Continue Reading »]]>
Thu, 7 Apr 2016 08:54:06 PDT
Multi-Use Bendy Phone Charging Cable http://www.instructables.com/id/Multi-Use-Bendy-Phone-Charging-Cable/
Multi-Use Bendy Phone Charging Cable - More DIY How To Projects]]> http://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SQUARE2.jpg http://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SQUARE.jpg http://cdn.instructables.com/FZ5/B98E/IM2B1J9X/FZ5B98EIM2B1J9X.SMALL.jpg pucksurfer Phone cables are one of the more important parts of our lives, we don't realize it but without them, we wouldn't be able to charge our phones, and without our phones... well let's not go there. Anyway, you get the idea, phone chargers are a pivotal part of our lives... (and to all of you people out ...
By: pucksurfer

Continue Reading »]]>
Mon, 21 Mar 2016 19:30:49 PDT
Smartphone Tripod Adapter--DIY for free http://www.instructables.com/id/Smartphone-Tripod-Adapter-DIY-for-Free/
Smartphone Tripod Adapter--DIY for free - More DIY How To Projects]]> http://cdn.instructables.com/FNO/4GG8/ILO0NRA9/FNO4GG8ILO0NRA9.SQUARE2.jpg http://cdn.instructables.com/FNO/4GG8/ILO0NRA9/FNO4GG8ILO0NRA9.SQUARE.jpg http://cdn.instructables.com/FNO/4GG8/ILO0NRA9/FNO4GG8ILO0NRA9.SMALL.jpg alanjamesblair Sometimes we really are too hard on ourselves.I was wracking my brain trying to figure out how I could make an easy and affordable tripod adapter for my iPod. While having a snack in the kitchen, inspiration struck. Keep it simple, silly. What you'll need A tripod.An old useless camera with a tri...
By: alanjamesblair

Continue Reading »]]>
Fri, 11 Mar 2016 20:52:22 PST
Reframe: Turn IPhones Into a Wall Widget http://www.instructables.com/id/Reframe-Turn-IPhones-Into-a-Wall-Widget/
Reframe: Turn IPhones Into a Wall Widget - More DIY How To Projects]]> http://cdn.instructables.com/FI3/V7TM/ILGVFZLW/FI3V7TMILGVFZLW.SQUARE2.jpg http://cdn.instructables.com/FI3/V7TM/ILGVFZLW/FI3V7TMILGVFZLW.SQUARE.jpg http://cdn.instructables.com/FI3/V7TM/ILGVFZLW/FI3V7TMILGVFZLW.SMALL.jpg purincess This Instructable is a revision to Reframe: turn old iPhones into wall clock or wall art! with the following benefits: Support for more devices: iPhone 3G/3GS, 4/4S, 5/5S More streamlined steps (laser-cutting only) Built-in hole for hanging.Here's a back story:If you're like me, you might ...
By: purincess

Continue Reading »]]>
Mon, 7 Mar 2016 07:01:44 PST
5 Google Cardboard VR Hacks http://www.instructables.com/id/5-Google-Cardboard-VR-Hacks/
5 Google Cardboard VR Hacks - More DIY How To Projects]]> http://cdn.instructables.com/FNO/K6RG/IL2624XA/FNOK6RGIL2624XA.SQUARE2.jpg http://cdn.instructables.com/FNO/K6RG/IL2624XA/FNOK6RGIL2624XA.SQUARE.jpg http://cdn.instructables.com/FNO/K6RG/IL2624XA/FNOK6RGIL2624XA.SMALL.jpg PerfectPixel Google Cardboard VR is the entry level VR headset that works with your smartphone. I got the chance to purchase one of these a while ago and when I first got it my first impressions was that it was good, but it could be better.The great thing about it though is that it is made of cardboard - it is l...
By: PerfectPixel

Continue Reading »]]>
Fri, 26 Feb 2016 09:10:39 PST
How To Disconnect from a Stalker Ex http://www.instructables.com/id/How-to-Disconnect-From-a-Stalker-Ex/
How To Disconnect from a Stalker Ex - More DIY How To Projects]]> http://cdn.instructables.com/F5K/DBH9/IL15L5C8/F5KDBH9IL15L5C8.SQUARE2.jpg http://cdn.instructables.com/F5K/DBH9/IL15L5C8/F5KDBH9IL15L5C8.SQUARE.jpg http://cdn.instructables.com/F5K/DBH9/IL15L5C8/F5KDBH9IL15L5C8.SMALL.jpg GenghisNBorte When an Ex won't stop trying to connect with you online you need a checklist to quickly wall off unwanted contact. This is a checklist to follow. I couldn't find one when I needed it, so I hope it will help others. Get Safe Make sure you are safe from physical or verbal confrontation. Get somewh...
By: GenghisNBorte

Continue Reading »]]>
Wed, 24 Feb 2016 15:59:51 PST
Smartphone Clipboard http://www.instructables.com/id/Smartphone-Clipboard/
Smartphone Clipboard - More DIY How To Projects]]> http://cdn.instructables.com/FL9/S3HC/IKJ86MQZ/FL9S3HCIKJ86MQZ.SQUARE2.jpg http://cdn.instructables.com/FL9/S3HC/IKJ86MQZ/FL9S3HCIKJ86MQZ.SQUARE.jpg http://cdn.instructables.com/FL9/S3HC/IKJ86MQZ/FL9S3HCIKJ86MQZ.SMALL.jpg Dave Malby Smartphones are fantastic for many uses besides it's main use as a phone. As a student at a lecture, with virtually no space for your phone, this clipboard works fantastic! With all the great apps available, the Smartphone Clipboard is great for taking notes, recording lectures, and messaging! Th...
By: Dave Malby

Continue Reading »]]>
Fri, 12 Feb 2016 09:14:43 PST
Iphone Cable Repair http://www.instructables.com/id/Iphone-Cable-Repair/
Iphone Cable Repair - More DIY How To Projects]]> http://cdn.instructables.com/FJV/7AIS/IJWWNOVM/FJV7AISIJWWNOVM.SQUARE2.jpg http://cdn.instructables.com/FJV/7AIS/IJWWNOVM/FJV7AISIJWWNOVM.SQUARE.jpg http://cdn.instructables.com/FJV/7AIS/IJWWNOVM/FJV7AISIJWWNOVM.SMALL.jpg MichaelA29 If you ever had your cable and it started to frey around the tip of the charger from over use this will help you fix this problem. GATHER YOUR TOOLS AND MATERIALS You are going to need your cable and just two more things. A hot glue gun and a Spring from a Pen.TOOLS-------------------------------...
By: MichaelA29

Continue Reading »]]>
Wed, 27 Jan 2016 18:13:07 PST
Smartphone Tripod Adapter http://www.instructables.com/id/Smartphone-Tripod-Adapter-1/
Smartphone Tripod Adapter - More DIY How To Projects]]> http://cdn.instructables.com/F4Q/4ZE4/IJSX3R12/F4Q4ZE4IJSX3R12.SQUARE2.jpg http://cdn.instructables.com/F4Q/4ZE4/IJSX3R12/F4Q4ZE4IJSX3R12.SQUARE.jpg http://cdn.instructables.com/F4Q/4ZE4/IJSX3R12/F4Q4ZE4IJSX3R12.SMALL.jpg Dustin Rogers I shoot the majority of my videos with my iPhone. I had been using a cheap plastic tripod adapter and finally got fed up with it. My two biggest complaints with it were: If not positioned properly, the lower cradle would activate the buttons on the side of the phone and secondly, the adapter-to-trip...
By: Dustin Rogers

Continue Reading »]]>
Sun, 24 Jan 2016 17:08:17 PST
Repair IPhone Home Button With Earplug. http://www.instructables.com/id/Repair-IPhone-Home-Button-With-Earplug/
Repair IPhone Home Button With Earplug. - More DIY How To Projects]]> http://cdn.instructables.com/F78/NUNP/IN7OQZSY/F78NUNPIN7OQZSY.SQUARE2.jpg http://cdn.instructables.com/F78/NUNP/IN7OQZSY/F78NUNPIN7OQZSY.SQUARE.jpg http://cdn.instructables.com/F78/NUNP/IN7OQZSY/F78NUNPIN7OQZSY.SMALL.jpg eelislehtinen Missing home button? No money for expencive repairs? This is right instructable for you! Step 1 Cut small piece of earplug. Step 2 Push your piece and fit it into your home buttons hole. Done Works perfectly!
By: eelislehtinen

Continue Reading »]]>
Sun, 24 Jan 2016 02:07:49 PST
Turn Your IPhone Packaging Box Into a Virtual Reality Headset http://www.instructables.com/id/Turn-Your-IPhone-Packaging-Box-Into-a-Virtual-Real/
Turn Your IPhone Packaging Box Into a Virtual Reality Headset - More DIY How To Projects]]> http://cdn.instructables.com/F81/FWY7/IJORUK09/F81FWY7IJORUK09.SQUARE2.jpg http://cdn.instructables.com/F81/FWY7/IJORUK09/F81FWY7IJORUK09.SQUARE.jpg http://cdn.instructables.com/F81/FWY7/IJORUK09/F81FWY7IJORUK09.SMALL.jpg Miemode Let's go DIY. Here's a simple and stylish way to turn any container into a vr headset. Use these material In this tutorial, we are using iPhone packaging box. You can also use any similar two-piece box that fits your phone. Download the template to position the lenses from Google Cardboard we...
By: Miemode

Continue Reading »]]>
Thu, 21 Jan 2016 23:47:03 PST
Fix a Frayed iPhone Cable http://www.instructables.com/id/HOW-TO-FIX-a-FRAYING-IPHONE-CHARGER-CABLE/
Fix a Frayed iPhone Cable - More DIY How To Projects]]> http://cdn.instructables.com/FKW/XLWG/IJKEJT0X/FKWXLWGIJKEJT0X.SQUARE2.jpg http://cdn.instructables.com/FKW/XLWG/IJKEJT0X/FKWXLWGIJKEJT0X.SQUARE.jpg http://cdn.instructables.com/FKW/XLWG/IJKEJT0X/FKWXLWGIJKEJT0X.SMALL.jpg Fionaussie I applied this cool fix to my iPhone charger cable. Because of the small lightening connector the 2:1 heat-shrink tubing slipped on easily. If your cable has a connector that's too large for the heat-shrink tubing, try using tubing with a 3:1 ratio (shrinks to 1/3 of the tube's original diameter). F...
By: Fionaussie

Continue Reading »]]>
Tue, 19 Jan 2016 08:18:56 PST
Arduino Simon Says Game http://www.instructables.com/id/Arduino-Simon-Says-Game-1/
Arduino Simon Says Game - More DIY How To Projects]]> http://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SQUARE2.jpg http://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SQUARE.jpg http://cdn.instructables.com/F6Z/KJYK/IJG270FO/F6ZKJYKIJG270FO.SMALL.jpg cgaine This is a fun project I did with my kids over the holidays.To house this game I decided to use an old iPhone 5c box. I had it just lying around and it seemed about the right size.List of Components:(Note: all links are products I used at the time I built the game and may become out of date over tim...
By: cgaine

Continue Reading »]]>
Sat, 16 Jan 2016 19:10:11 PST
Making the connecting plugs for Macbook and iPhone Charger interchangeable http://www.instructables.com/id/Making-the-Connecting-Plugs-for-Macbook-and-IPhone/
Making the connecting plugs for Macbook and iPhone Charger interchangeable - More DIY How To Projects]]> http://cdn.instructables.com/FKP/5XIF/IJ8X0HBE/FKP5XIFIJ8X0HBE.SQUARE2.jpg http://cdn.instructables.com/FKP/5XIF/IJ8X0HBE/FKP5XIFIJ8X0HBE.SQUARE.jpg http://cdn.instructables.com/FKP/5XIF/IJ8X0HBE/FKP5XIFIJ8X0HBE.SMALL.jpg dmalg All those who have a macbook and a mac charger for your iPhone know the problem: the connecting piece for your socket-outlets *should* be interchangeable, but only the short, direct plug piece really is. The piece with the cord is missing a dent. Or the mobile charger has a tiny bit too much plastic...
By: dmalg

Continue Reading »]]>
Mon, 11 Jan 2016 07:18:34 PST
Adding Bluetooth 4.0 to your Arduino Project [IoT] - Controlled by Smartphone http://www.instructables.com/id/Adding-Bluetooth-40-to-Your-Arduino-Project-IoT-Co/
Adding Bluetooth 4.0 to your Arduino Project [IoT] - Controlled by Smartphone - More DIY How To Projects]]> http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SQUARE2.jpg http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SQUARE.jpg http://cdn.instructables.com/FVN/ZK7F/IIM1UQHZ/FVNZK7FIIM1UQHZ.SMALL.jpg IoTalabs We are group of internet of things enthusiasts that love hacking together different devices. Check out our current project at our website and take a look at this guide in a different format at our blog. Introduction Arduino is a cool platform because you can easily interact with your projects fro...
By: IoTalabs

Continue Reading »]]>
Fri, 25 Dec 2015 16:55:06 PST
Faux Flowerpot USB Charger http://www.instructables.com/id/Faux-Flowerpot-USB-Charger/
Faux Flowerpot USB Charger - More DIY How To Projects]]> http://cdn.instructables.com/FV1/BSX9/II96VSIX/FV1BSX9II96VSIX.SQUARE2.jpg http://cdn.instructables.com/FV1/BSX9/II96VSIX/FV1BSX9II96VSIX.SQUARE.jpg http://cdn.instructables.com/FV1/BSX9/II96VSIX/FV1BSX9II96VSIX.SMALL.jpg RuthlessKarma Do you ever get tired of looking at that mess of chargers and wires in the high traffic areas in your house ? How about a cheap, easy and good looking way to hide them? Materials & Tools 1. Container that meets your size requirements of your location2. Hard Styrofoam 3. Black or green felt paper...
By: RuthlessKarma

Continue Reading »]]>
Wed, 16 Dec 2015 15:16:06 PST
Augmented Reality Christmas Card (TfCD) http://www.instructables.com/id/Augmented-Reality-Christmas-Card/
Augmented Reality Christmas Card (TfCD) - More DIY How To Projects]]> http://cdn.instructables.com/FCD/FKN4/II96YLNO/FCDFKN4II96YLNO.SQUARE2.jpg http://cdn.instructables.com/FCD/FKN4/II96YLNO/FCDFKN4II96YLNO.SQUARE.jpg http://cdn.instructables.com/FCD/FKN4/II96YLNO/FCDFKN4II96YLNO.SMALL.jpg Mark BertB Make christmas unforgettable by impressing your family with a home made futuristic christmas card!Augmented Reality (AR) is an upcoming and awesome technology. It allows you to add virtual visuals to reality through means of a screen and camera or a projection. It is applicable in many fields, but i...
By: Mark BertB

Continue Reading »]]>
Thu, 17 Dec 2015 08:12:10 PST
Fool Your "Smart" Phone http://www.instructables.com/id/Fool-Your-Smart-Phone/
Fool Your "Smart" Phone - More DIY How To Projects]]> http://cdn.instructables.com/FHZ/HR9F/II96V4RB/FHZHR9FII96V4RB.SQUARE2.jpg http://cdn.instructables.com/FHZ/HR9F/II96V4RB/FHZHR9FII96V4RB.SQUARE.jpg http://cdn.instructables.com/FHZ/HR9F/II96V4RB/FHZHR9FII96V4RB.SMALL.jpg Just4Fun Media This is a simple project to learn about and play with "Capacitive Touch". Modern touchscreens use this technology to detect your finger by detecting electromagnetic fields. More precisely your body's electromagnetic pulses.By simulating these pulses using a controller and using carbon fiber to simul...
By: Just4Fun Media

Continue Reading »]]>
Tue, 15 Dec 2015 18:25:24 PST
DIY Geometric Laptop/iPhone Decal http://www.instructables.com/id/DIY-Geometric-LaptopiPhone-Decal/
DIY Geometric Laptop/iPhone Decal - More DIY How To Projects]]> http://cdn.instructables.com/F1K/B73L/II4WJLE1/F1KB73LII4WJLE1.SQUARE2.jpg http://cdn.instructables.com/F1K/B73L/II4WJLE1/F1KB73LII4WJLE1.SQUARE.jpg http://cdn.instructables.com/F1K/B73L/II4WJLE1/F1KB73LII4WJLE1.SMALL.jpg rawdesignco Making a custom decal for your technology does not have to be expensive or complicated. In fact, you only need 3 things to complete this project!You can also use these instructions to place a handmade decal on ANY surface. However, I recommend a very smooth surface, like metal or glass. For the purp...
By: rawdesignco

Continue Reading »]]>
Sun, 13 Dec 2015 13:23:29 PST
Iphone sextant project http://www.instructables.com/id/ISextant-Project/
Iphone sextant project - More DIY How To Projects]]> http://cdn.instructables.com/F58/6489/II01QDQ0/F586489II01QDQ0.SQUARE2.jpg http://cdn.instructables.com/F58/6489/II01QDQ0/F586489II01QDQ0.SQUARE.jpg http://cdn.instructables.com/F58/6489/II01QDQ0/F586489II01QDQ0.SMALL.jpg omarreis This project uses the iphone orientation sensors (magnetic compass and gyroscope) to work as a sextant for celestial navigation. With this device, you can take altitudes of a couple stars and calculate your astronomical position.At first I tried to use the bare phone camera as pointing device. But p...
By: omarreis

Continue Reading »]]>
Thu, 10 Dec 2015 09:22:16 PST
iPhone stand http://www.instructables.com/id/iPhone-stand-6/
iPhone stand - More DIY How To Projects]]> http://cdn.instructables.com/FKY/F9LF/IHNB3KYQ/FKYF9LFIHNB3KYQ.SQUARE2.jpg http://cdn.instructables.com/FKY/F9LF/IHNB3KYQ/FKYF9LFIHNB3KYQ.SQUARE.jpg http://cdn.instructables.com/FKY/F9LF/IHNB3KYQ/FKYF9LFIHNB3KYQ.SMALL.jpg Yaroslava This project was made during the lamp design workshop directed by the Noah Norton from The University of Wisconsin-Stout in Menomonie. The workshop was held in Fablab Moscow. The task was to make a design of a lamp, but I decided to use my iPhone as a lamp source. Cheater, yes.I used the ideas from ...
By: Yaroslava

Continue Reading »]]>
Tue, 1 Dec 2015 08:23:42 PST
Smartphone Alarm Clock http://www.instructables.com/id/Smartphone-Alarm-Clock/
Smartphone Alarm Clock - More DIY How To Projects]]> http://cdn.instructables.com/FJR/VNL2/IHI3PM3L/FJRVNL2IHI3PM3L.SQUARE2.jpg http://cdn.instructables.com/FJR/VNL2/IHI3PM3L/FJRVNL2IHI3PM3L.SQUARE.jpg http://cdn.instructables.com/FJR/VNL2/IHI3PM3L/FJRVNL2IHI3PM3L.SMALL.jpg Ingenerare Hi!In this Instructable I will tell you how to make a good looking smartphone alarm clock. The alarm clock displays the time, can charge the phone and houses a mini amplifier and speaker. I had the idea to build this alarm clock for a long time but the "Time" contest helped me to get started. The d...
By: Ingenerare

Continue Reading »]]>
Sun, 22 Nov 2015 06:29:11 PST
Classic Cardboard http://www.instructables.com/id/Classic-Cardboard/
Classic Cardboard - More DIY How To Projects]]> http://cdn.instructables.com/FTQ/JXER/IH2BRW3F/FTQJXERIH2BRW3F.SQUARE2.jpg http://cdn.instructables.com/FTQ/JXER/IH2BRW3F/FTQJXERIH2BRW3F.SQUARE.jpg http://cdn.instructables.com/FTQ/JXER/IH2BRW3F/FTQJXERIH2BRW3F.SMALL.jpg janth After some lenses arrived at the fablab (special thanks to iMoox) it was time to finally build my own google cardboard. Since the new cardboard seems to be a little bit big for the ipone 6s i decided to go for the first version, and when i'm already at a classic version of the cardboard, i can also ...
By: janth

Continue Reading »]]>
Tue, 17 Nov 2015 08:13:28 PST
Smartphone Photo Studio for #3DBenchy and tiny stuff http://www.instructables.com/id/Smartphone-Photo-Studio-for-3DBenchy-and-tiny-stuf/
Smartphone Photo Studio for #3DBenchy and tiny stuff - More DIY How To Projects]]> http://cdn.instructables.com/FO2/0QZ6/IG2HFQ6M/FO20QZ6IG2HFQ6M.SQUARE2.jpg http://cdn.instructables.com/FO2/0QZ6/IG2HFQ6M/FO20QZ6IG2HFQ6M.SQUARE.jpg http://cdn.instructables.com/FO2/0QZ6/IG2HFQ6M/FO20QZ6IG2HFQ6M.SMALL.jpg CreativeTools DESCRIPTIONThis 3D-printable camera rig for smartphones is designed to create a repeatable way to photograph #3DBenchy models at fixed angle positions. An included turntable attachment makes it is also possible to record 360° videos.The base frame and phone shelf are easily adjustable to fit most co...
By: CreativeTools

Continue Reading »]]>
Fri, 23 Oct 2015 00:42:56 PDT
iPhone Universal Learing Remote with Arduino http://www.instructables.com/id/iPhone-Universal-Learing-Remote-with-Arduino/
iPhone Universal Learing Remote with Arduino - More DIY How To Projects]]> http://cdn.instructables.com/FYJ/M033/IFR43NK5/FYJM033IFR43NK5.SQUARE2.jpg http://cdn.instructables.com/FYJ/M033/IFR43NK5/FYJM033IFR43NK5.SQUARE.jpg http://cdn.instructables.com/FYJ/M033/IFR43NK5/FYJM033IFR43NK5.SMALL.jpg jcuk Hello, and welcome to my first Instructable.I don't know about you, but I can never find the remote for my TV. It always seems to disappear whenever I need it and then only turns up days later wedged inside the sofa by one of the kids. One thing do I always have with me though, is my iPhone. My iPho...
By: jcuk

Continue Reading »]]>
Thu, 15 Oct 2015 04:10:58 PDT
iPad mini inside of a Macintosh SE retro old classic http://www.instructables.com/id/iPad-mini-inside-of-a-Macintosh-SE-retro-old-class/
iPad mini inside of a Macintosh SE retro old classic - More DIY How To Projects]]> http://cdn.instructables.com/FJJ/7HGD/HY7T91VX/FJJ7HGDHY7T91VX.SQUARE2.jpg http://cdn.instructables.com/FJJ/7HGD/HY7T91VX/FJJ7HGDHY7T91VX.SQUARE.jpg http://cdn.instructables.com/FJJ/7HGD/HY7T91VX/FJJ7HGDHY7T91VX.SMALL.jpg travderose I mounted an iPad mini inside of an old retro Macintosh SE. I also included a small pair of computer speakers. I had seen other projects similar to this but they all used a regular iPad which I think is too big because the edges are cut off, and they were also docks for the iPad. There was a big s...
By: travderose

Continue Reading »]]>
Mon, 10 Jun 2013 15:11:10 PDT
Super Simple Phone Charger http://www.instructables.com/id/Super-Simple-Phone-Charger/
Super Simple Phone Charger - More DIY How To Projects]]> http://cdn.instructables.com/FZU/C6A3/IEB8BZR9/FZUC6A3IEB8BZR9.SQUARE2.jpg http://cdn.instructables.com/FZU/C6A3/IEB8BZR9/FZUC6A3IEB8BZR9.SQUARE.jpg http://cdn.instructables.com/FZU/C6A3/IEB8BZR9/FZUC6A3IEB8BZR9.SMALL.jpg lonesoulsurfer This could possibly be one of the most simplest phone chargers you can make. I wanted to make a charger that could use a 9v battery to power-up my phone. The worst thing about having a phone charger which you charge via USB is you never remember to charge it! After looking through a few 'ibles I ...
By: lonesoulsurfer

Continue Reading »]]>
Thu, 10 Sep 2015 03:40:56 PDT
How To Control a 3D Printer with a Phone via DIY AstroBox http://www.instructables.com/id/How-To-Control-a-3D-Printer-with-a-Phone-via-DIY-A/
How To Control a 3D Printer with a Phone via DIY AstroBox - More DIY How To Projects]]> http://cdn.instructables.com/FFN/V6O4/IEA9FK8L/FFNV6O4IEA9FK8L.SQUARE2.jpg http://cdn.instructables.com/FFN/V6O4/IEA9FK8L/FFNV6O4IEA9FK8L.SQUARE.jpg http://cdn.instructables.com/FFN/V6O4/IEA9FK8L/FFNV6O4IEA9FK8L.SMALL.jpg Toglefritz This Instructable will show you how to set up a Raspberry Pi-based print server so you can control and monitor your 3D printer remotely (including remote slicing) from a phone, tablet, or computer. Wireless PrintingOf course, the main purpose of this Instructable is to show you how to build a print...
By: Toglefritz

Continue Reading »]]>
Mon, 7 Sep 2015 16:01:40 PDT
Smartphone Controlled Robot http://www.instructables.com/id/Smartphone-Controlled-Robot/
Smartphone Controlled Robot - More DIY How To Projects]]> http://cdn.instructables.com/F1Z/ULMM/IE6HAFBC/F1ZULMMIE6HAFBC.SQUARE2.jpg http://cdn.instructables.com/F1Z/ULMM/IE6HAFBC/F1ZULMMIE6HAFBC.SQUARE.jpg http://cdn.instructables.com/F1Z/ULMM/IE6HAFBC/F1ZULMMIE6HAFBC.SMALL.jpg Treker2 Hello instructibles, today I will be showing you how to make a tablet bot. Tablet bot is a remote controllable tablet based robot built using zip ties and recycled DVD drive parts. The base of tablet bot contains an Arduino UNO and a seed studio motor shield. All of this is hooked up to an Asus t100...
By: Treker2

Continue Reading »]]>
Sat, 5 Sep 2015 11:49:12 PDT
No solder nylon wrapped phone cable! http://www.instructables.com/id/No-solder-nylon-wrapped-phone-cable/
No solder nylon wrapped phone cable! - More DIY How To Projects]]> http://cdn.instructables.com/FB3/U152/IDUQO753/FB3U152IDUQO753.SQUARE2.jpg http://cdn.instructables.com/FB3/U152/IDUQO753/FB3U152IDUQO753.SQUARE.jpg http://cdn.instructables.com/FB3/U152/IDUQO753/FB3U152IDUQO753.SMALL.jpg Alaric Loftus Whether you have broken 3 of your fingers attempting to run in stilts and need to call your mom or need to order some life saving pizza delivered to your shop, your phone is your most valuable tool. Most devices require you to connect to a power source. So recently, I wanted to make a nylon wrapped ...
By: Alaric Loftus

Continue Reading »]]>
Sat, 29 Aug 2015 05:40:32 PDT
Airplay in the Car http://www.instructables.com/id/Airplay-in-the-Car/
Airplay in the Car - More DIY How To Projects]]> http://cdn.instructables.com/F1C/KER0/IDRP68YD/F1CKER0IDRP68YD.SQUARE2.jpg http://cdn.instructables.com/F1C/KER0/IDRP68YD/F1CKER0IDRP68YD.SQUARE.jpg http://cdn.instructables.com/F1C/KER0/IDRP68YD/F1CKER0IDRP68YD.SMALL.jpg puaerotch Bluetooth is a popular method to wirelessly play music from a phone through a car stereo system. But it's not the only option. You can also use Apple's Airplay. This can be done using an Airport Express. Of course, you could buy a power converter to plug into your car's 12V jack, but what fun is...
By: puaerotch

Continue Reading »]]>
Tue, 25 Aug 2015 16:16:59 PDT
DIY Mobile Macro Lens http://www.instructables.com/id/DIY-Mobile-Macro-Lens/
DIY Mobile Macro Lens - More DIY How To Projects]]> http://cdn.instructables.com/FD2/N41P/IDPSBXKN/FD2N41PIDPSBXKN.SQUARE2.jpg http://cdn.instructables.com/FD2/N41P/IDPSBXKN/FD2N41PIDPSBXKN.SQUARE.jpg http://cdn.instructables.com/FD2/N41P/IDPSBXKN/FD2N41PIDPSBXKN.SMALL.jpg Victor Does Do you still try to take pictures with your phone really close but does not seam to get a god focus? No problem! With this projects you will be able to take some stunning close-ups and discover a whole new world! You will need:Old camera (as shown later on in this project, and digital camera will no...
By: Victor Does

Continue Reading »]]>
Mon, 24 Aug 2015 06:35:37 PDT
DIY Cracked iPhone Makeover http://www.instructables.com/id/DIY-Cracked-iPhone-Makeover/
DIY Cracked iPhone Makeover - More DIY How To Projects]]> http://cdn.instructables.com/F4J/5Z6N/IDOCXNA0/F4J5Z6NIDOCXNA0.SQUARE2.jpg http://cdn.instructables.com/F4J/5Z6N/IDOCXNA0/F4J5Z6NIDOCXNA0.SQUARE.jpg http://cdn.instructables.com/F4J/5Z6N/IDOCXNA0/F4J5Z6NIDOCXNA0.SMALL.jpg dat groovy girl When my white iPhone 4 cracked on not one, but both sides, I was heartbroken. I thought it turned into a piece of junk; but with this awesome hack it became a more cool and colorful piece of junk:).Supplies:- Cracked white iPhone 4- Highlighters- Clear nail polish- Damp paper towel (to wipe of the e...
By: dat groovy girl

Continue Reading »]]>
Sun, 23 Aug 2015 20:37:35 PDT
Sharing your LinkedIn profile link wirelessly http://www.instructables.com/id/Sharing-your-LinkedIn-profile-link-wirelessly/
Sharing your LinkedIn profile link wirelessly - More DIY How To Projects]]> http://cdn.instructables.com/F0H/0TII/IDLO2BQP/F0H0TIIIDLO2BQP.SQUARE2.jpg http://cdn.instructables.com/F0H/0TII/IDLO2BQP/F0H0TIIIDLO2BQP.SQUARE.jpg http://cdn.instructables.com/F0H/0TII/IDLO2BQP/F0H0TIIIDLO2BQP.SMALL.jpg tarikozket Having an interesting conversation with the person next to you at an event. They are interested to add you on the LinkedIn and stay in touch. They pass their phone to you and want you to write down your name in to the LinkedIn search box. What if you had some magical powers like making your LinkedIn...
By: tarikozket

Continue Reading »]]>
Sat, 22 Aug 2015 11:27:16 PDT
Bluetooth Police Beacon http://www.instructables.com/id/Bluetooth-Police-Beacon/
Bluetooth Police Beacon - More DIY How To Projects]]> http://cdn.instructables.com/FQ1/QISJ/IDH7SDXB/FQ1QISJIDH7SDXB.SQUARE2.jpg http://cdn.instructables.com/FQ1/QISJ/IDH7SDXB/FQ1QISJIDH7SDXB.SQUARE.jpg http://cdn.instructables.com/FQ1/QISJ/IDH7SDXB/FQ1QISJIDH7SDXB.SMALL.jpg laxap This mini rotating police beacon can be turned on and off remotely, from a smartphone via Bluetooth Low Energy (BLE).In this project, we will get hands-on experience on:a) Using a Lightblue Bean (old version) -- a small Arduino compatible board, dedicated to BLE.b) Converting a 5V power supply to 3....
By: laxap

Continue Reading »]]>
Tue, 18 Aug 2015 16:05:15 PDT
Reframe: turn old iPhones into wall clock or wall art! http://www.instructables.com/id/Reframe-turn-old-iPhones-into-wall-clock-or-wall-a/
Reframe: turn old iPhones into wall clock or wall art! - More DIY How To Projects]]> http://cdn.instructables.com/FGV/XTHD/ID5S7P1G/FGVXTHDID5S7P1G.SQUARE2.jpg http://cdn.instructables.com/FGV/XTHD/ID5S7P1G/FGVXTHDID5S7P1G.SQUARE.jpg http://cdn.instructables.com/FGV/XTHD/ID5S7P1G/FGVXTHDID5S7P1G.SMALL.jpg purincess Do you have an old functional iPhone that’s sitting around collecting dust? It’s a completely functional super-advanced mini-computer with a wonderful screen, speakers, microphones, and a ton of sensors built in. I set out to find an elegant way to repurpose them, and one solution I found is this: b...
By: purincess

Continue Reading »]]>
Mon, 10 Aug 2015 10:40:45 PDT
Water Drop Macro Lens http://www.instructables.com/id/How-to-make-a-water-drop-macro-lens/
Water Drop Macro Lens - More DIY How To Projects]]> http://cdn.instructables.com/FMV/NKAZ/ID02GV96/FMVNKAZID02GV96.SQUARE2.jpg http://cdn.instructables.com/FMV/NKAZ/ID02GV96/FMVNKAZID02GV96.SQUARE.jpg http://cdn.instructables.com/FMV/NKAZ/ID02GV96/FMVNKAZID02GV96.SMALL.jpg Znaffi In this instructable I will show you, how you can take really cool macro pictures with a drop of water as a lens for your smartphone / tablet.We are putting water directly onto the smartphone / tablet, so don't do this, if you are worried, that it will cause damages. I am not worried at all, as I ha...
By: Znaffi

Continue Reading »]]>
Thu, 6 Aug 2015 11:52:34 PDT
IPhone 5 Screen Replacement http://www.instructables.com/id/IPhone-5-Screen-Replacement/
IPhone 5 Screen Replacement - More DIY How To Projects]]> http://cdn.instructables.com/FHN/V69V/ICRXO13O/FHNV69VICRXO13O.SQUARE2.jpg http://cdn.instructables.com/FHN/V69V/ICRXO13O/FHNV69VICRXO13O.SQUARE.jpg http://cdn.instructables.com/FHN/V69V/ICRXO13O/FHNV69VICRXO13O.SMALL.jpg LucasOchoa My brother recently came back from college with a broken iPhone 5. After a little research I realized how much easier it was to fix this phone compared to the previous iPhone 4/4s. Instead of going through the back of the phone and removing all of the components it is as simple as moving all of the...
By: LucasOchoa

Continue Reading »]]>
Sat, 1 Aug 2015 14:58:04 PDT
iPhone 6 Photography http://www.instructables.com/id/iPhone-6-Photography/
iPhone 6 Photography - More DIY How To Projects]]> http://cdn.instructables.com/FZH/MR4R/ICE1WTCV/FZHMR4RICE1WTCV.SQUARE2.jpg http://cdn.instructables.com/FZH/MR4R/ICE1WTCV/FZHMR4RICE1WTCV.SQUARE.jpg http://cdn.instructables.com/FZH/MR4R/ICE1WTCV/FZHMR4RICE1WTCV.SMALL.jpg zstarkovich I have loved the iPhone 6 ever since it came out and i got it. The camera is my favorite feature on it. Close Ups I love the iphone 6 camera because of how good of close up pictures you can take. The way that i take these amazing close ups is by holding the camera about 4 inches away from the sub...
By: zstarkovich

Continue Reading »]]>
Wed, 22 Jul 2015 17:34:46 PDT
DIY Steadicam for GoPro or iPhone, Camera stabilizer http://www.instructables.com/id/DIY-Steadicam-for-GoPro-or-iPhone-Camera-stabilize/
DIY Steadicam for GoPro or iPhone, Camera stabilizer - More DIY How To Projects]]> http://cdn.instructables.com/FRD/OXSA/IC6I4WKD/FRDOXSAIC6I4WKD.SQUARE2.jpg http://cdn.instructables.com/FRD/OXSA/IC6I4WKD/FRDOXSAIC6I4WKD.SQUARE.jpg http://cdn.instructables.com/FRD/OXSA/IC6I4WKD/FRDOXSAIC6I4WKD.SMALL.jpg Warren Downes - One Wood Make a Steadicam for a GoPro or iPhoneusing wood bent lamination and aluminum, get that steady shot you have been looking for in this easy woodworking project that will teach you some new techniques like bent lamination.Nothing is more annoying that watching video with a shaky camera this simple Ste...
By: Warren Downes - One Wood

Continue Reading »]]>
Fri, 17 Jul 2015 18:48:13 PDT
Bocina de lata/ Recycled Speaker Can http://www.instructables.com/id/Bocina-de-lata/
Bocina de lata/ Recycled Speaker Can - More DIY How To Projects]]> http://cdn.instructables.com/F03/RDH6/IBC2NFT7/F03RDH6IBC2NFT7.SQUARE2.jpg http://cdn.instructables.com/F03/RDH6/IBC2NFT7/F03RDH6IBC2NFT7.SQUARE.jpg http://cdn.instructables.com/F03/RDH6/IBC2NFT7/F03RDH6IBC2NFT7.SMALL.jpg gmendez3 Haremos esta bocina hecha con una lata para que puedas escuchar tu música favorita, necesitaremos lo siguiente.Materiales: 1 Lata, puede ser de café o leche en polvo o lo que quieras./// A coffee can or milk powder can with plastic cover.4 Tornillos de 5/32" para ajustar la bocina/// 4 screws 5/...
By: gmendez3

Continue Reading »]]>
Fri, 26 Jun 2015 09:08:13 PDT
Smart Home Power Strip http://www.instructables.com/id/DIY-Smart-Home-Electric-Socket/
Smart Home Power Strip - More DIY How To Projects]]> http://cdn.instructables.com/FTO/0OXM/IBGCA9ZU/FTO0OXMIBGCA9ZU.SQUARE2.jpg http://cdn.instructables.com/FTO/0OXM/IBGCA9ZU/FTO0OXMIBGCA9ZU.SQUARE.jpg http://cdn.instructables.com/FTO/0OXM/IBGCA9ZU/FTO0OXMIBGCA9ZU.SMALL.jpg Samuel_Alexander Smart Home Power Strip is an android and/or iDevice controllable plug outlet. You can turn the individual outlets by taping a button from your gadgets. I spend about $32 making this project.Difficulty level: Medium (Basic electronics and soldering skills required)Time needed: A weekendDisclaimer: Th...
By: Samuel_Alexander

Continue Reading »]]>
Fri, 26 Jun 2015 06:57:35 PDT
Graphic Design from iOS http://www.instructables.com/id/Graphic-Design-from-iOS/
Graphic Design from iOS - More DIY How To Projects]]> http://cdn.instructables.com/FEQ/321T/IATHLETI/FEQ321TIATHLETI.SQUARE2.jpg http://cdn.instructables.com/FEQ/321T/IATHLETI/FEQ321TIATHLETI.SQUARE.jpg http://cdn.instructables.com/FEQ/321T/IATHLETI/FEQ321TIATHLETI.SMALL.jpg jimmychakarji In this tutorial I will teach you how to create a professional looking graphic design from your iOS deviceInspiration could strike when you're away from your desk Capture your your design idea using your iOS deviceYour iOS device can be more than just a phone or a tablet, it could be the most helpfu...
By: jimmychakarji

Continue Reading »]]>
Mon, 8 Jun 2015 13:37:16 PDT
Hockey Puck Phone Stand-Minimalistic version (v2.0) http://www.instructables.com/id/Hockey-Puck-Phone-Stand-Minimalistic-version-v20/
Hockey Puck Phone Stand-Minimalistic version (v2.0) - More DIY How To Projects]]> http://cdn.instructables.com/FRU/GSKR/IAJHVH3U/FRUGSKRIAJHVH3U.SQUARE2.jpg http://cdn.instructables.com/FRU/GSKR/IAJHVH3U/FRUGSKRIAJHVH3U.SQUARE.jpg http://cdn.instructables.com/FRU/GSKR/IAJHVH3U/FRUGSKRIAJHVH3U.SMALL.jpg pucksurfer For all of you hockey fans out there, this is for you... (and me). I bring to you, a hockey puck mobile device stand, version 2. You can see my original puck stand, which turned out very ummmm, interesting to say the least. Anyway, this is a pretty easy and simple way to turn an old puck, into a swe...
By: pucksurfer

Continue Reading »]]>
Mon, 8 Jun 2015 06:25:37 PDT
How to make a Bluetooth Speaker http://www.instructables.com/id/How-to-make-a-Bluetooth-Speaker/
How to make a Bluetooth Speaker - More DIY How To Projects]]> http://cdn.instructables.com/FN3/XTNC/IAJNYBFE/FN3XTNCIAJNYBFE.SQUARE2.jpg http://cdn.instructables.com/FN3/XTNC/IAJNYBFE/FN3XTNCIAJNYBFE.SQUARE.jpg http://cdn.instructables.com/FN3/XTNC/IAJNYBFE/FN3XTNCIAJNYBFE.SMALL.jpg Constructed Hi, Welcome to my instructable!Today Ill teach you how to build a DIY Bluetooth speaker. Its extremely easy to make, and great for anyone learning electronics. The best part is you dont need any past experience with electronics! This project is great to practice your soldering skills (Mine clearly n...
By: Constructed

Continue Reading »]]>
Mon, 8 Jun 2015 07:25:21 PDT
Shooting Simple Product Photos with Printer Paper, A Smartphone and a Window http://www.instructables.com/id/Shooting-Simple-Product-Photos-with-Printer-Paper-/
Shooting Simple Product Photos with Printer Paper, A Smartphone and a Window - More DIY How To Projects]]> http://cdn.instructables.com/FHE/Z2TY/IAMCE0S9/FHEZ2TYIAMCE0S9.SQUARE2.jpg http://cdn.instructables.com/FHE/Z2TY/IAMCE0S9/FHEZ2TYIAMCE0S9.SQUARE.jpg http://cdn.instructables.com/FHE/Z2TY/IAMCE0S9/FHEZ2TYIAMCE0S9.SMALL.jpg superaudiomadras Short and sweet beginner’s tutorial on how you can easily shoot a professional looking product photo using any camera, natural window light and a few sheets of white printer paper. Stuff You Need 1) A flat surface or a wall2) A smart phone or any camera3) A few sheets of A4 paper or printer paper...
By: superaudiomadras

Continue Reading »]]>
Mon, 8 Jun 2015 04:50:29 PDT