Instructables: exploring - technology - led - fun http://www.instructables.com Mon, 22 Dec 2014 02:56:46 PST BLOX v1.01 DIY Robot Mold Making, Casting, and Arduino Remote Control http://www.instructables.com/id/DIY-Robot-Mold-Making-Casting-and-Arduino-Remote-C/
DIY Robot Mold Making, Casting, and Arduino Remote Control - More DIY How To Projects]]> http://cdn.instructables.com/FDA/LBZH/I2XA8PMD/FDALBZHI2XA8PMD.SQUARE2.jpg http://cdn.instructables.com/FDA/LBZH/I2XA8PMD/FDALBZHI2XA8PMD.SQUARE.jpg http://cdn.instructables.com/FDA/LBZH/I2XA8PMD/FDALBZHI2XA8PMD.SMALL.jpg ComposiMold Learn how to build your own unique robot with ComposiMold.Parts List:ComposiStone (2lbs), Hot glue, Spray adhesive, PureCast605, Elmer’s Glue, Used ComposiMold, ProtoCast85R, Water, Toy Robot, Silicone, Cardboard Box’s, Paint, Colored tissue Paper, Cups, Wires, Delight Paper Clay, Plastic bags/ tras...
By: ComposiMold

Continue Reading »]]>
Tue, 25 Nov 2014 09:38:30 PST
DIY pocket sized bluetooth receiver http://www.instructables.com/id/DIY-pocket-sized-bluetooth-receiver/
DIY pocket sized bluetooth receiver - More DIY How To Projects]]> http://cdn.instructables.com/FB0/3Z4C/I28W6YOR/FB03Z4CI28W6YOR.SQUARE2.jpg http://cdn.instructables.com/FB0/3Z4C/I28W6YOR/FB03Z4CI28W6YOR.SQUARE.jpg http://cdn.instructables.com/FB0/3Z4C/I28W6YOR/FB03Z4CI28W6YOR.SMALL.jpg ibenkos In this project I'm making an wireless bluetooth receiver that you can connect to any amplifier or headset and you don't have to deal whit the AUX cable and that you can't use your phone far away while playing music.This is an easy project and an fun one! Its 3v coming from the batteries and goes in...
By: ibenkos

Continue Reading »]]>
Fri, 7 Nov 2014 12:38:08 PST
IcosaLEDron: A Multi LED Smart Ball http://www.instructables.com/id/IcosaLEDron-A-Multi-LED-Smart-Ball/
IcosaLEDron: A Multi LED Smart Ball - More DIY How To Projects]]> http://cdn.instructables.com/FUB/64QT/I24LYBTV/FUB64QTI24LYBTV.SQUARE2.jpg http://cdn.instructables.com/FUB/64QT/I24LYBTV/FUB64QTI24LYBTV.SQUARE.jpg http://cdn.instructables.com/FUB/64QT/I24LYBTV/FUB64QTI24LYBTV.SMALL.jpg Afritlabs What is an IcosaLEDron? It's a programmable, rechargeable 20 sided "ball" with a RGB LED on each face. Inside is a custom PCB equipped with the Atmega328p that is Arduino compatible allowing for easy programming of different effects. With twenty WS2812B LEDs (also known as Neopixels) positioned equa...
By: Afritlabs

Continue Reading »]]>
Mon, 3 Nov 2014 20:09:42 PST
RGB Ghost http://www.instructables.com/id/RGB-Ghost/
RGB Ghost - More DIY How To Projects]]> http://cdn.instructables.com/FZP/MFO6/I1KJK1LV/FZPMFO6I1KJK1LV.SQUARE2.jpg http://cdn.instructables.com/FZP/MFO6/I1KJK1LV/FZPMFO6I1KJK1LV.SQUARE.jpg http://cdn.instructables.com/FZP/MFO6/I1KJK1LV/FZPMFO6I1KJK1LV.SMALL.jpg lmowry UPDATE: video example was uploaded:)http://youtu.be/xOAMFGLDaVkThis is a simple tutorial on my findings on making a foam ghost and a free issues I ran into... I made four of these and am using them outside for some shows. But due to it being made of styrofoam the wind rubbing it up against the trees...
By: lmowry

Continue Reading »]]>
Wed, 22 Oct 2014 11:21:18 PDT
Newton Cradle Lamp http://www.instructables.com/id/Newton-Cradle-Lamp/
Newton Cradle Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FBT/X4R5/I1C462CO/FBTX4R5I1C462CO.SQUARE2.jpg http://cdn.instructables.com/FBT/X4R5/I1C462CO/FBTX4R5I1C462CO.SQUARE.jpg http://cdn.instructables.com/FBT/X4R5/I1C462CO/FBTX4R5I1C462CO.SMALL.gif sabotai I recently made this 'lamp' using 5 simple circuits and red LEDs.See it in action here.Materials Necessary:1. Newton's Cradle of this style2. 5 CR2032 3V Batteries*3. Copper Tape4. Conductive Thread5. 5 Diffused LEDs of your choice* You could also change up the circuit to use less batteries Wrappi...
By: sabotai

Continue Reading »]]>
Sun, 19 Oct 2014 00:15:37 PDT
Build Night Boston at the Flagship Computer Clubhouse, Boston Museum of Science http://www.instructables.com/id/Build-Night-Boston-at-the-Flagship-Computer-Clubho/
Build Night Boston at the Flagship Computer Clubhouse, Boston Museum of Science - More DIY How To Projects]]> http://cdn.instructables.com/FDV/DMKH/HZXYJU99/FDVDMKHHZXYJU99.SQUARE2.jpg http://cdn.instructables.com/FDV/DMKH/HZXYJU99/FDVDMKHHZXYJU99.SQUARE.jpg http://cdn.instructables.com/FDV/DMKH/HZXYJU99/FDVDMKHHZXYJU99.SMALL.jpg jackiez "Having received the LED's from Instructables for our very own build night, we were amazed at how many there were in the box and at once began to come up with ideas that would put them to good use. Our space decided on a decorative sign that would embody who we are as a space and a program. Our main...
By: jackiez

Continue Reading »]]>
Tue, 9 Sep 2014 08:38:31 PDT
LED Felt Carrot with Soft Circuits http://www.instructables.com/id/LED-Felt-Carrot-with-Soft-Circuits/
LED Felt Carrot with Soft Circuits - More DIY How To Projects]]> http://cdn.instructables.com/F5O/V4T3/HZS8TFL4/F5OV4T3HZS8TFL4.SQUARE2.jpg http://cdn.instructables.com/F5O/V4T3/HZS8TFL4/F5OV4T3HZS8TFL4.SQUARE.jpg http://cdn.instructables.com/F5O/V4T3/HZS8TFL4/F5OV4T3HZS8TFL4.SMALL.jpg Snax_and_Macs Hi! Have you ever wanted to make a felt carrot that lights up when you touch it? Yes!? Well then this is the Instructables for you!Here's what you need: MaterialsFelt - Green and Orange3V battery2 LED's Needle and orange and green thread Solder/Soldering Iron and conductive material OR Copper Tape C...
By: Snax_and_Macs

Continue Reading »]]>
Sun, 7 Sep 2014 10:33:57 PDT
Rocket Kit - Beginner Solar Powered + LED http://www.instructables.com/id/Rocket-Kit-Beginner-Solar-Powered-LED/
Rocket Kit - Beginner Solar Powered + LED - More DIY How To Projects]]> http://cdn.instructables.com/F1W/MWMW/HZ13FBK9/F1WMWMWHZ13FBK9.SQUARE2.jpg http://cdn.instructables.com/F1W/MWMW/HZ13FBK9/F1WMWMWHZ13FBK9.SQUARE.jpg http://cdn.instructables.com/F1W/MWMW/HZ13FBK9/F1WMWMWHZ13FBK9.SMALL.jpg lumenjewelry This instructable is for a solar powered Rocket Kit. It measures about 2" by 1", including the USB tab. It has one hole through the top of the board, making hanging easy. We show it as a necklace, but you could make yours into earrings, a keychain, bond on a pin, or hang it in a window. The pos...
By: lumenjewelry

Continue Reading »]]>
Tue, 19 Aug 2014 10:20:13 PDT
555 RGB Rainbow LED Driver (NOT using a 4029) http://www.instructables.com/id/RGB-Rainbow-LED-Driver-An-Alternative-NOT-done-wit/
555 RGB Rainbow LED Driver (NOT using a 4029) - More DIY How To Projects]]> http://cdn.instructables.com/FCD/RYOQ/HYZX8683/FCDRYOQHYZX8683.SQUARE2.jpg http://cdn.instructables.com/FCD/RYOQ/HYZX8683/FCDRYOQHYZX8683.SQUARE.jpg http://cdn.instructables.com/FCD/RYOQ/HYZX8683/FCDRYOQHYZX8683.SMALL.gif A_Teacher | A_Teacher |Ok, so as far as I can tell, this is a unique brand NEW design. The project is in a few contests on instructables at the moment, if you like what I have made, please Vote for it.Calling all Space Cadets: As a way of motivating folks to make the project, I am currently giving away a ...
By: A_Teacher

Continue Reading »]]>
Thu, 14 Aug 2014 04:48:27 PDT
Flashing LED Railroad Lights made with 555 timer http://www.instructables.com/id/Flashing-LED-Railroad-Lights-made-with-555-timer/
Flashing LED Railroad Lights made with 555 timer - More DIY How To Projects]]> http://cdn.instructables.com/F52/KKST/HYHGHT6N/F52KKSTHYHGHT6N.SQUARE2.jpg http://cdn.instructables.com/F52/KKST/HYHGHT6N/F52KKSTHYHGHT6N.SQUARE.jpg http://cdn.instructables.com/F52/KKST/HYHGHT6N/F52KKSTHYHGHT6N.SMALL.jpg iburntmyhandwhilesoldering Hey there this is a small circuit i put together with a 555 timer, a few LEDS,some resistors and capacitors.Check it out, Build it and tell me if it works.Thanks! Get the parts!!1 A word of caution:This project is not for people with photosensitive epilepsy.Thank you.Parts Required:R1 and R4: 470...
By: iburntmyhandwhilesoldering

Continue Reading »]]>
Wed, 6 Aug 2014 05:02:09 PDT
How to create your very own DIY Instrument Plane! InstruPlane!! Create your own music tape to play on DIY Instrument http://www.instructables.com/id/How-to-create-your-very-own-DIY-Instrument-Plane-I/
How to create your very own DIY Instrument Plane! InstruPlane!! Create your own music tape to play on DIY Instrument - More DIY How To Projects]]> http://cdn.instructables.com/FIC/R180/HXVR31XQ/FICR180HXVR31XQ.SQUARE2.jpg http://cdn.instructables.com/FIC/R180/HXVR31XQ/FICR180HXVR31XQ.SQUARE.jpg http://cdn.instructables.com/FIC/R180/HXVR31XQ/FICR180HXVR31XQ.SMALL.jpg techwillsaveus How to do it?Tools:Foam Board, Bottle cap, clear film, electrical tape, cutting mat, Pencil, blade, ruler, something sharp to pierce holes, sticky pads, two nuts an bolts and some washers.Step 1. Cut out your aeroplane shape from foamboard and use the sticky pads to stick it on to the back of your ...
By: techwillsaveus

Continue Reading »]]>
Mon, 21 Jul 2014 13:22:57 PDT
Make your own little clog out of conductive dough! http://www.instructables.com/id/Make-your-own-little-clog-out-of-conductive-dough/
Make your own little clog out of conductive dough! - More DIY How To Projects]]> http://cdn.instructables.com/FCC/1B0J/HXVR32IK/FCC1B0JHXVR32IK.SQUARE2.jpg http://cdn.instructables.com/FCC/1B0J/HXVR32IK/FCC1B0JHXVR32IK.SQUARE.jpg http://cdn.instructables.com/FCC/1B0J/HXVR32IK/FCC1B0JHXVR32IK.SMALL.jpg techwillsaveus 1. Make your own little Clog out of conductive dough :)2. Make some holes in your character 3. Put some insulating dough at the bottom of each hole 4. Build up some conductive walls around the holes (this makes the game more difficult!) 5. Now make the little conductive 'bugs' to take out of Clog ...
By: techwillsaveus

Continue Reading »]]>
Mon, 21 Jul 2014 07:12:23 PDT
Lightning / Firefly Bugs Jar http://www.instructables.com/id/Lightning-Firefly-Bugs-Jar/
Lightning / Firefly Bugs Jar - More DIY How To Projects]]> http://cdn.instructables.com/F5S/8L1B/HXDPG13Z/F5S8L1BHXDPG13Z.SQUARE2.jpg http://cdn.instructables.com/F5S/8L1B/HXDPG13Z/F5S8L1BHXDPG13Z.SQUARE.jpg http://cdn.instructables.com/F5S/8L1B/HXDPG13Z/F5S8L1BHXDPG13Z.SMALL.jpg RobSmithDev I was invited to help a local charity put on an event to raise some money, The theme was sunset beach, and this summoned images of beautiful skys and lighting bugs / firefly's. I know several people have created firefly jars before but I wanted something simple. I needed to make 8 of these jars, ...
By: RobSmithDev

Continue Reading »]]>
Wed, 9 Jul 2014 14:34:09 PDT
DIY iPhone controller for Raspberry-Pi (OSC) http://www.instructables.com/id/R-Pi-control-Android-iPhone-via-OSC/
DIY iPhone controller for Raspberry-Pi (OSC) - More DIY How To Projects]]> http://cdn.instructables.com/FJJ/HMYR/HXCCLU1U/FJJHMYRHXCCLU1U.SQUARE2.jpg http://cdn.instructables.com/FJJ/HMYR/HXCCLU1U/FJJHMYRHXCCLU1U.SQUARE.jpg http://cdn.instructables.com/FJJ/HMYR/HXCCLU1U/FJJHMYRHXCCLU1U.SMALL.jpg Greg0reo To start off this project I would like to explain how all this will work. We will be using a form of communication called OSC (Open Sound Control) and an app called "TouchOSC" which is available on the Google Play and Apple app store, along with pyOSC. What we will do is the following:- Create a sui...
By: Greg0reo

Continue Reading »]]>
Tue, 1 Jul 2014 18:04:26 PDT
The simplest game ever http://www.instructables.com/id/The-simplest-game-ever/
The simplest game ever - More DIY How To Projects]]> http://cdn.instructables.com/F8X/0AQX/HWH2K362/F8X0AQXHWH2K362.SQUARE2.jpg http://cdn.instructables.com/F8X/0AQX/HWH2K362/F8X0AQXHWH2K362.SQUARE.jpg http://cdn.instructables.com/F8X/0AQX/HWH2K362/F8X0AQXHWH2K362.SMALL.jpg qquuiinn As Moore's law states, processors have been getting faster. In turn, they are ale to process more, meaning that video games are getting more and more realistic. But as microcontrollers and the maker movement have been spreading, so have the number of microcontroller-based games that defy these real...
By: qquuiinn

Continue Reading »]]>
Mon, 16 Jun 2014 15:43:31 PDT
RGB Lantern http://www.instructables.com/id/RGB-Lantern/
RGB Lantern - More DIY How To Projects]]> http://cdn.instructables.com/FDJ/ZZ82/HR0AXDYZ/FDJZZ82HR0AXDYZ.SQUARE2.jpg http://cdn.instructables.com/FDJ/ZZ82/HR0AXDYZ/FDJZZ82HR0AXDYZ.SQUARE.jpg http://cdn.instructables.com/FDJ/ZZ82/HR0AXDYZ/FDJZZ82HR0AXDYZ.SMALL.jpg sammydogjj A quick, easy, and fun color changing with multiple modes RGB lantern. Gather Materials -9v battery clip-Resistor for your RGB led-RGB led (mine had 3 prongs)-Momentary switch-Housing (I used a mason jar and it looks nice) Wiring Diagram And Schematic null Begin Assembly -Make a hole for y...
By: sammydogjj

Continue Reading »]]>
Mon, 3 Feb 2014 05:54:36 PST
Glowing Snowball http://www.instructables.com/id/Glowing-Snowball/
Glowing Snowball - More DIY How To Projects]]> http://cdn.instructables.com/FP4/47EF/HQ8QP87Z/FP447EFHQ8QP87Z.SQUARE2.jpg http://cdn.instructables.com/FP4/47EF/HQ8QP87Z/FP447EFHQ8QP87Z.SQUARE.jpg http://cdn.instructables.com/FP4/47EF/HQ8QP87Z/FP447EFHQ8QP87Z.SMALL.jpg Cats Science Club Want that special someone to really see that snowball coming as it is about to hit them? Looking for that right lighting for your snow fort? Want the neighbors to think you have a fire in your igloo? Here it is, the Glowing Snowball. Easy to make and fun to play with. This instructable is a combina...
By: Cats Science Club

Continue Reading »]]>
Thu, 9 Jan 2014 20:42:45 PST
Why buy a festive card for a friend or your family when you can make one? What if you could make one full of LEDs, batteries and the art work itself was conductive? http://www.instructables.com/id/Why-buy-a-festive-card-for-a-friend-or-your-family/ http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SQUARE2.jpg http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SQUARE.jpg http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SMALL.jpg techwillsaveus Why buy a festive card for a friend or your family when you can make one? What if you could make one full of LEDs, batteries and the art work itself was conductive? This DIY kit comes with Bare Conductive paint - a multipurpose electrically conductive material, 6 LED's, 3 button cell betteries, a se...
By: techwillsaveus

Continue Reading »]]>
Thu, 19 Dec 2013 07:48:42 PST
Easy LED Color Changing "Candle" http://www.instructables.com/id/Easy-LED-Color-Changing-Light/
Easy LED Color Changing "Candle" - More DIY How To Projects]]> http://cdn.instructables.com/FYL/MJZ5/HP71H2BW/FYLMJZ5HP71H2BW.SQUARE2.jpg http://cdn.instructables.com/FYL/MJZ5/HP71H2BW/FYLMJZ5HP71H2BW.SQUARE.jpg http://cdn.instructables.com/FYL/MJZ5/HP71H2BW/FYLMJZ5HP71H2BW.SMALL.jpg Cats Science Club This is a simple color changing light that is great for kids and adults. Looks beautiful in a dimly lit room, great for the holidays, and makes a pretty cool night light. Materials Glue Gun - We are using a low temperature glue gun. It hurts when the glue touches your skin but it does not burn y...
By: Cats Science Club

Continue Reading »]]>
Sat, 14 Dec 2013 08:41:26 PST
$3.00 Altoids Charger (EASY BUILD) (CHEAP) http://www.instructables.com/id/300-Altoids-Charger-EASY-BUILD-CHEAP/
$3.00 Altoids Charger (EASY BUILD) (CHEAP) - More DIY How To Projects]]> http://cdn.instructables.com/F4H/O57K/HOUG0C9N/F4HO57KHOUG0C9N.SQUARE2.jpg http://cdn.instructables.com/F4H/O57K/HOUG0C9N/F4HO57KHOUG0C9N.SQUARE.jpg http://cdn.instructables.com/F4H/O57K/HOUG0C9N/F4HO57KHOUG0C9N.SMALL.jpg snow1434 I know your thinking i have seen hundreds of these but have you ever seen one so easy to build? LETS GET STARTED Things you will need : L78MO5CV Voltage Regulator http://www.taydaelectronics.com/ic-integrated-circuits/voltage-regulators/lm7805-l7805-7805-voltage-regulator-ic-5v-1-5a.html ...
By: snow1434

Continue Reading »]]>
Sun, 8 Dec 2013 21:48:07 PST
TWSU How to assemble your own video console DIY GAMER http://www.instructables.com/id/How-to-assemble-your-DIY-GAMER/ http://cdn.instructables.com/F01/GY8Q/HOHYJ16Y/F01GY8QHOHYJ16Y.SQUARE2.jpg http://cdn.instructables.com/F01/GY8Q/HOHYJ16Y/F01GY8QHOHYJ16Y.SQUARE.jpg http://cdn.instructables.com/F01/GY8Q/HOHYJ16Y/F01GY8QHOHYJ16Y.SMALL.jpg techwillsaveus This tutorial will give you a quick overview about how to solder all the components on you DIY GAMER Kit! Have a look at our website: www.technologywillsaveus.org E-mail us on: info@technologywillsaveus.org Tweet us: @techwillsaveus
By: techwillsaveus

Continue Reading »]]>
Thu, 28 Nov 2013 05:00:14 PST
Glowing Color-Changing Guitar http://www.instructables.com/id/Glowing-Color-Changing-Guitar/
Glowing Color-Changing Guitar - More DIY How To Projects]]> http://cdn.instructables.com/FCJ/1G0G/HLSH87BX/FCJ1G0GHLSH87BX.SQUARE2.jpg http://cdn.instructables.com/FCJ/1G0G/HLSH87BX/FCJ1G0GHLSH87BX.SQUARE.jpg http://cdn.instructables.com/FCJ/1G0G/HLSH87BX/FCJ1G0GHLSH87BX.SMALL.jpg randofo In the kingdom of rock and roll it is important to set oneself apart. With millions of people in this world who can play the guitar, simply playing well is just not going to cut it. You need something extra to rise up as a rock god. Consider this guitar the mystical glowing ax bestowed upon you by...
By: randofo

Continue Reading »]]>
Mon, 18 Nov 2013 10:28:21 PST
Arduino defuseable bomb, perfect for airsoft games! (with timer, LCD, keypad, sound and more!) http://www.instructables.com/id/Arduino-defuseable-bomb-perfect-for-airsoft-games-/
Arduino defuseable bomb, perfect for airsoft games! (with timer, LCD, keypad, sound and more!) - More DIY How To Projects]]> http://cdn.instructables.com/FMP/WHP0/HN8245GK/FMPWHP0HN8245GK.SQUARE2.jpg http://cdn.instructables.com/FMP/WHP0/HN8245GK/FMPWHP0HN8245GK.SQUARE.jpg http://cdn.instructables.com/FMP/WHP0/HN8245GK/FMPWHP0HN8245GK.SMALL.jpg MaltheF Hello This is a project I made a long time ago, but decided to upload anyways, feel free to ask me about it! The bomb has several features: - Password input by keypad to arm the bomb - Timer/count down - Sound - Flashy LEDs - Defusing via the password - LCD display - Keypad - Simple to edit and chan...
By: MaltheF

Continue Reading »]]>
Sat, 26 Oct 2013 17:09:40 PDT
Arduino Countdown Timer http://www.instructables.com/id/Arduino-Countdown-Timer/
Arduino Countdown Timer - More DIY How To Projects]]> http://cdn.instructables.com/FYK/HCEA/HJKBSUW9/FYKHCEAHJKBSUW9.SQUARE2.jpg http://cdn.instructables.com/FYK/HCEA/HJKBSUW9/FYKHCEAHJKBSUW9.SQUARE.jpg http://cdn.instructables.com/FYK/HCEA/HJKBSUW9/FYKHCEAHJKBSUW9.SMALL.jpg randofo The Arduino Countdown Timer is a fun weekend project for beginners who wants to move on to something slightly more advanced. The timer controls two 7-segment displays which count down from 99 to 0, and can be stopped and started using a button. When the timer reaches 0, the display flashes and a buz...
By: randofo

Continue Reading »]]>
Fri, 4 Oct 2013 07:54:05 PDT
DIY solar rechargeable automatic night light (outside use) http://www.instructables.com/id/DIY-solar-rechareable-automatic-night-light-outsi/
DIY solar rechargeable automatic night light (outside use) - More DIY How To Projects]]> http://cdn.instructables.com/FEV/JVNR/HJKC242C/FEVJVNRHJKC242C.SQUARE2.jpg http://cdn.instructables.com/FEV/JVNR/HJKC242C/FEVJVNRHJKC242C.SQUARE.jpg http://cdn.instructables.com/FEV/JVNR/HJKC242C/FEVJVNRHJKC242C.SMALL.jpg out-of-the-box In this I will show you how to make a solar rechargeable automatic led night light. I made mine for outside use but hey you could do whatever with yours! :)   How did this idea come about? first I have been meaning to get some sort of light fixture in our back yard, I was going to install an out...
By: out-of-the-box

Continue Reading »]]>
Wed, 31 Jul 2013 21:52:31 PDT
Film Canister Battery http://www.instructables.com/id/Film-Canister-Battery/
Film Canister Battery - More DIY How To Projects]]> http://cdn.instructables.com/FIN/EZF1/HJKBUG33/FINEZF1HJKBUG33.SQUARE2.jpg http://cdn.instructables.com/FIN/EZF1/HJKBUG33/FINEZF1HJKBUG33.SQUARE.jpg http://cdn.instructables.com/FIN/EZF1/HJKBUG33/FINEZF1HJKBUG33.SMALL.jpg Cats Science Club Making a battery from film canisters, used wire, vinegar, and nails. Check us out at catsscience.com and on Facebook Please vote for us. Materials Film canisters Vinegar Safety goggles Nails (zinc coated) Wire Cutters Alligator clips with wire Scrap copper wire Red LED No film canisters? You ...
By: Cats Science Club

Continue Reading »]]>
Sat, 27 Jul 2013 11:11:45 PDT
Rainbowduino: Ping Pong http://www.instructables.com/id/Rainbowduino-Ping-Pong/
Rainbowduino: Ping Pong - More DIY How To Projects]]> http://cdn.instructables.com/FDW/UFX2/HI3TOEP8/FDWUFX2HI3TOEP8.SQUARE2.jpg http://cdn.instructables.com/FDW/UFX2/HI3TOEP8/FDWUFX2HI3TOEP8.SQUARE.jpg http://cdn.instructables.com/FDW/UFX2/HI3TOEP8/FDWUFX2HI3TOEP8.SMALL.jpg lini27 Everybody likes to play a game. That`s why i created Pong for the Rainbowduino. This is a two player game, so you can play this game with a friend.  The game includes a counter, the first who has 5 points wins the game. Parts and Stuff You need these things: - 2 Potentiometer 10K - 1 Rainbowdui...
By: lini27

Continue Reading »]]>
Sat, 22 Jun 2013 02:26:48 PDT
Lightsaber knitting needles http://www.instructables.com/id/Light-saber-knitting-needles/
Lightsaber knitting needles - More DIY How To Projects]]> http://cdn.instructables.com/FQM/LEI0/HH2W0B7L/FQMLEI0HH2W0B7L.SQUARE2.jpg http://cdn.instructables.com/FQM/LEI0/HH2W0B7L/FQMLEI0HH2W0B7L.SQUARE.jpg http://cdn.instructables.com/FQM/LEI0/HH2W0B7L/FQMLEI0HH2W0B7L.SMALL.jpg Random_Canadian An Epic Battle With Every Stitch... I will not embarrass you with my poor knitting but maybe someone out there can "give me a hand! Right?" I will however show a cast on at night in a darkened room with the lights off! I made a second set at 8 inches length for the pocket size contest! And a thi...
By: Random_Canadian

Continue Reading »]]>
Wed, 5 Jun 2013 21:37:17 PDT
Make Your Own Light Painting Orb Creator http://www.instructables.com/id/Make-Your-Own-Light-Painting-Orb-Creator/
Make Your Own Light Painting Orb Creator - More DIY How To Projects]]> http://cdn.instructables.com/FST/MDIS/HGU2JHW9/FSTMDISHGU2JHW9.SQUARE2.jpg http://cdn.instructables.com/FST/MDIS/HGU2JHW9/FSTMDISHGU2JHW9.SQUARE.jpg http://cdn.instructables.com/FST/MDIS/HGU2JHW9/FSTMDISHGU2JHW9.SMALL.jpg mazzmn Long exposure night photography can be a fun pass-time especially on a cool summer evening. "Light painting" can make things even more fun. If you've looked into light painting you've no doubt seen Orb's, spherical mystery lights....Orb photos are created by spinning bright LED lights.  This Instru...
By: mazzmn

Continue Reading »]]>
Sun, 19 May 2013 13:23:05 PDT
Rotary Phone iPod Dock http://www.instructables.com/id/Rotary-Phone-iPod-Dock/
Rotary Phone iPod Dock - More DIY How To Projects]]> http://cdn.instructables.com/FB2/DREG/HFSHF90U/FB2DREGHFSHF90U.SQUARE2.jpg http://cdn.instructables.com/FB2/DREG/HFSHF90U/FB2DREGHFSHF90U.SQUARE.jpg http://cdn.instructables.com/FB2/DREG/HFSHF90U/FB2DREGHFSHF90U.SMALL.jpg tomatoskins I have always loved re-purposing one thing into another. This instructable will show pictures of my completed iPod dock with commentary on how I put it together. I apologize that I didn't take pictures through the whole process. I was just too excited about the project. Parts Needed Parts needed:...
By: tomatoskins

Continue Reading »]]>
Sat, 27 Apr 2013 20:58:01 PDT
Color Visualizer http://www.instructables.com/id/Color-Visualizer/ http://cdn.instructables.com/F59/Q02V/HFD15VRV/F59Q02VHFD15VRV.SQUARE2.jpg http://cdn.instructables.com/F59/Q02V/HFD15VRV/F59Q02VHFD15VRV.SQUARE.jpg http://cdn.instructables.com/F59/Q02V/HFD15VRV/F59Q02VHFD15VRV.SMALL.jpg Qtechknow Ever wanted an interactive and simple soldering kit for beginners?  The Color Visualizer has three potentiometers, resistors, a battery pack, and an RGB LED to make a simple soldering kit, and an interactive project all in one!!!  I originally came up with the design, and prototyped it on a breadboa...
By: Qtechknow

Continue Reading »]]>
Mon, 15 Apr 2013 23:46:59 PDT
How to make led lamp to save dollars http://www.instructables.com/id/How-to-make-led-lamp-to-save-dollars/ http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SQUARE2.jpg http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SQUARE.jpg http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SMALL.jpg macobt Replace old incandescent bulb with leds,homemade led lamp made of 8 pieces 1 watt leds connected in serial array,one array have 5 leds,other have 3 leds.Total 8 watts of led light replace about 60 watts  incandescent light. Subscribe to my youtube channel:http://www.youtube.com/user/macobt Visit b...
By: macobt

Continue Reading »]]>
Tue, 2 Apr 2013 08:29:57 PDT
How to make air duster http://www.instructables.com/id/How-to-make-air-duster/ http://cdn.instructables.com/FW6/VDAT/HEXSRZIE/FW6VDATHEXSRZIE.SQUARE2.jpg http://cdn.instructables.com/FW6/VDAT/HEXSRZIE/FW6VDATHEXSRZIE.SQUARE.jpg http://cdn.instructables.com/FW6/VDAT/HEXSRZIE/FW6VDATHEXSRZIE.SMALL.jpg macobt Here is a quick, easy and fun way to make refillable air duster. Visit my blogspot:http://macoprojects.blogspot.com/ or visit my channel:https://www.youtube.com/user/macobt
By: macobt

Continue Reading »]]>
Sun, 31 Mar 2013 15:41:44 PDT
Tiny Altoid Tin Robot With Personality http://www.instructables.com/id/Tiny-Altoid-Tin-Robot-With-Personality/
Tiny Altoid Tin Robot With Personality - More DIY How To Projects]]> http://cdn.instructables.com/FAQ/22GN/HET1F8WZ/FAQ22GNHET1F8WZ.SQUARE2.jpg http://cdn.instructables.com/FAQ/22GN/HET1F8WZ/FAQ22GNHET1F8WZ.SQUARE.jpg http://cdn.instructables.com/FAQ/22GN/HET1F8WZ/FAQ22GNHET1F8WZ.SMALL.jpg Mizchief100 I love robots. Normally the ones I build are quite large and wouldn't fit in your pocket, but for a change of pace I decided I would try something small and fun! This robot is exactly that, and in fact fits inside of an altoids tin. It is inexpensive, versatile (so many different sensors can be used...
By: Mizchief100

Continue Reading »]]>
Sat, 30 Mar 2013 12:25:45 PDT
"ButtonMasherz" (Arduino Project) http://www.instructables.com/id/ButtonMasherz-Arduino-Project/ http://cdn.instructables.com/FLB/ET6A/HDP32GDP/FLBET6AHDP32GDP.SQUARE2.jpg http://cdn.instructables.com/FLB/ET6A/HDP32GDP/FLBET6AHDP32GDP.SQUARE.jpg http://cdn.instructables.com/FLB/ET6A/HDP32GDP/FLBET6AHDP32GDP.SMALL.jpg thechinskyguy This game can be written and uploaded to an Arduino Leonardo (and likely other Arduino boards) so it can be played between two players. The objective of the game is to press your button 50 times before the other player can. The code can be found below, and follow the images for instructions on wirin...
By: thechinskyguy

Continue Reading »]]>
Tue, 5 Mar 2013 16:08:31 PST
Logic Love Heart http://www.instructables.com/id/Logic-Love-Heart/
Logic Love Heart - More DIY How To Projects]]> http://cdn.instructables.com/F5G/2X7F/HD8TX0HQ/F5G2X7FHD8TX0HQ.SQUARE2.jpg http://cdn.instructables.com/F5G/2X7F/HD8TX0HQ/F5G2X7FHD8TX0HQ.SQUARE.jpg http://cdn.instructables.com/F5G/2X7F/HD8TX0HQ/F5G2X7FHD8TX0HQ.SMALL.jpg passmadd Hello everyone :) This is a Logic Love Heart I created for an old flame this year (we have a kid and we're still good mates, plus I like winding her up). Some say love isn't logical, well it is now! So sit back, grab a beer and I'll show you how I made this. Firstly, I had some fundamentals for t...
By: passmadd

Continue Reading »]]>
Sun, 24 Feb 2013 15:28:02 PST
Wearable USB drivey - MK ii http://www.instructables.com/id/Wearable-USB-drivey-MK-ii/
Wearable USB drivey - MK ii - More DIY How To Projects]]> http://cdn.instructables.com/F0A/27FZ/HCJO1JPL/F0A27FZHCJO1JPL.SQUARE2.jpg http://cdn.instructables.com/F0A/27FZ/HCJO1JPL/F0A27FZHCJO1JPL.SQUARE.jpg http://cdn.instructables.com/F0A/27FZ/HCJO1JPL/F0A27FZHCJO1JPL.SMALL.jpg tech ace Hello there. As far as I know, I believe that USB memory has been the greatest versatile storage device ever. Now, cloud has been  great device, but what will we do when there is no internet coverage?  And USB is great when we modify them to suit our needs. I was looking for a right time, for a righ...
By: tech ace

Continue Reading »]]>
Sun, 3 Feb 2013 03:02:19 PST
Iron Man - Arc Reactor http://www.instructables.com/id/Iron-Man-Arc-Reactor-4/
Iron Man - Arc Reactor - More DIY How To Projects]]> http://cdn.instructables.com/FCU/1Y6Q/HCJORLR2/FCU1Y6QHCJORLR2.SQUARE2.jpg http://cdn.instructables.com/FCU/1Y6Q/HCJORLR2/FCU1Y6QHCJORLR2.SQUARE.jpg http://cdn.instructables.com/FCU/1Y6Q/HCJORLR2/FCU1Y6QHCJORLR2.SMALL.jpg zapdos Hi,this is my first and the only instructable so far. Sorry for my bad comunication skills nad English :) So always follow the pictures. You may ask all of your queries in your mind in any way. Here are the materials I used for a simple Arc Reactor. - A CD container - 10 meters copper wire - Alumin...
By: zapdos

Continue Reading »]]>
Wed, 30 Jan 2013 16:41:13 PST
Color Changing Christmas Star http://www.instructables.com/id/Color-Changing-Christmas-Star/
Color Changing Christmas Star - More DIY How To Projects]]> http://cdn.instructables.com/FIS/ZWRG/HAVGJTBJ/FISZWRGHAVGJTBJ.SQUARE2.jpg http://cdn.instructables.com/FIS/ZWRG/HAVGJTBJ/FISZWRGHAVGJTBJ.SQUARE.jpg http://cdn.instructables.com/FIS/ZWRG/HAVGJTBJ/FISZWRGHAVGJTBJ.SMALL.jpg Qtechknow Ever wanted to make that normal, golden star at the top of your Christmas tree different?  How about color changing?  The new Color Changing Christmas Star does that all in one package.  The main components are 5 RGB LEDs, an Arduino UNO, and an Arduino Proto Shield.  They all fit together on a Drem...
By: Qtechknow

Continue Reading »]]>
Mon, 31 Dec 2012 18:09:55 PST
Arduino Project - E-Dice! (Beginner) http://www.instructables.com/id/Arduino-Project-E-Dice-Beginner/
Arduino Project - E-Dice! (Beginner) - More DIY How To Projects]]> http://cdn.instructables.com/F8I/8XZD/H9T4S8SP/F8I8XZDH9T4S8SP.SQUARE2.jpg http://cdn.instructables.com/F8I/8XZD/H9T4S8SP/F8I8XZDH9T4S8SP.SQUARE.jpg http://cdn.instructables.com/F8I/8XZD/H9T4S8SP/F8I8XZDH9T4S8SP.SMALL.jpg .A. Well, I just got my Arduino kit in the mail yesterday, and I was very happy to get started! After about an hour or two, I decided to start making something fun: An electronic dice. I had to make this myself, because there were no instructables that i could find with search! D: Mine is not very adv...
By: .A.

Continue Reading »]]>
Wed, 21 Nov 2012 18:38:05 PST
Wireless Power http://www.instructables.com/id/Wireless-Power-1/ http://cdn.instructables.com/F3C/V0XC/H7S4ZVRN/F3CV0XCH7S4ZVRN.SQUARE2.jpg http://cdn.instructables.com/F3C/V0XC/H7S4ZVRN/F3CV0XCH7S4ZVRN.SQUARE.jpg http://cdn.instructables.com/F3C/V0XC/H7S4ZVRN/F3CV0XCH7S4ZVRN.SMALL.gif ixisuprflyixi I will start with an apology because I do not have enough time to write up a proper Instructable.  This was mostly just a proof of concept build for me and I wanted to see how difficult it was.  It was actually very easy and hence you don't really need much more instruction than is provided.   I use...
By: ixisuprflyixi

Continue Reading »]]>
Mon, 1 Oct 2012 20:15:01 PDT
NyanCube! http://www.instructables.com/id/NyanCube/ http://cdn.instructables.com/FFU/ENHD/H7431JKK/FFUENHDH7431JKK.SQUARE2.jpg http://cdn.instructables.com/FFU/ENHD/H7431JKK/FFUENHDH7431JKK.SQUARE.jpg http://cdn.instructables.com/FFU/ENHD/H7431JKK/FFUENHDH7431JKK.SMALL.jpg canon1200 After ordering 10 tilt switches and got tired of playing around with it, I got an idea of combining this with a RGB LED and voilà! NYANCUBEEE! By the way, this is just a prototype. Newer version coming soon! If you like it, I will post an Instructable. Enjoy!
By: canon1200

Continue Reading »]]>
Sat, 29 Sep 2012 07:21:59 PDT
Traffic Lights kit + XXL Green LED Blinker Kit in one box with one battery! http://www.instructables.com/id/Traffic-Lights-kit-XXL-Green-LED-Blinker-Kit-in-/
Traffic Lights kit + XXL Green LED Blinker Kit in one box with one battery! - More DIY How To Projects]]> http://cdn.instructables.com/F0F/D9MI/H6S4FWTN/F0FD9MIH6S4FWTN.SQUARE2.jpg http://cdn.instructables.com/F0F/D9MI/H6S4FWTN/F0FD9MIH6S4FWTN.SQUARE.jpg http://cdn.instructables.com/F0F/D9MI/H6S4FWTN/F0FD9MIH6S4FWTN.SMALL.jpg powerman666 I built alot of these types of kits and mostly they don't come with boxes to protect the circuits. Alot of times they also don't come with parts that accommodate them for being in nice boxes either. So you'll have to buy some extra parts. For this project I bought the Traffic Lights Kit and the XX...
By: powerman666

Continue Reading »]]>
Thu, 6 Sep 2012 20:55:14 PDT
DIY Infrared Proximity Sensor (Arduino Compatible) http://www.instructables.com/id/DIY-Infrared-Proximity-Sensor-Arduino-Compatible/
DIY Infrared Proximity Sensor (Arduino Compatible) - More DIY How To Projects]]> http://cdn.instructables.com/F0C/LXFM/H6MER0K5/F0CLXFMH6MER0K5.SQUARE2.jpg http://cdn.instructables.com/F0C/LXFM/H6MER0K5/F0CLXFMH6MER0K5.SQUARE.jpg http://cdn.instructables.com/F0C/LXFM/H6MER0K5/F0CLXFMH6MER0K5.SMALL.jpg xBacon Ever looked on Sparkfun or Adafruit for some cool robot parts, and saw those expensive IR and Ultrasonic proximity sensors? I have, and I really wanted one, but they're so expensive ($30-$40 or more) so I decided that I could make one myself with the parts I had on hand for way less. What I came up...
By: xBacon

Continue Reading »]]>
Sun, 2 Sep 2012 17:40:23 PDT
Color Changing LED Tree http://www.instructables.com/id/Color-Changing-LED-Tree/
Color Changing LED Tree - More DIY How To Projects]]> http://cdn.instructables.com/FJH/I290/H6DWVKBC/FJHI290H6DWVKBC.SQUARE2.jpg http://cdn.instructables.com/FJH/I290/H6DWVKBC/FJHI290H6DWVKBC.SQUARE.jpg http://cdn.instructables.com/FJH/I290/H6DWVKBC/FJHI290H6DWVKBC.SMALL.jpg xBacon Ever wanted an LED tree? Well now you can have your LED tree and eat it too (no, wait, you probably shouldn't)... Gather the parts You will need: 1x ATtiny85 10x male header pins Solid core wire, 2 colors A bunch of LEDs 1x Arduino Uno to program the ATtiny Program the ATtiny To prep the Ard...
By: xBacon

Continue Reading »]]>
Thu, 30 Aug 2012 10:19:46 PDT
ATtiny85 Mini RGB Mood Light! http://www.instructables.com/id/ATtiny85-Mini-RGB-Mood-Light/
ATtiny85 Mini RGB Mood Light! - More DIY How To Projects]]> http://cdn.instructables.com/F0J/JRE2/H5EDUZVI/F0JJRE2H5EDUZVI.SQUARE2.jpg http://cdn.instructables.com/F0J/JRE2/H5EDUZVI/F0JJRE2H5EDUZVI.SQUARE.jpg http://cdn.instructables.com/F0J/JRE2/H5EDUZVI/F0JJRE2H5EDUZVI.SMALL.jpg xBacon I have seen RGB mood lights using Arduino, PIC, and larger AVR chips, but never one with the ATtiny85. That's why I decided to make one. This mood light is super simple to make and all the parts can be purchased online for about $5.00 total (not including the Arduino used to program the chip). Thi...
By: xBacon

Continue Reading »]]>
Thu, 16 Aug 2012 15:37:20 PDT
Connect 4 Binary Clock http://www.instructables.com/id/Connect-4-Binary-Clock/
Connect 4 Binary Clock - More DIY How To Projects]]> http://cdn.instructables.com/FF1/UOU1/H5JVONY6/FF1UOU1H5JVONY6.SQUARE2.jpg http://cdn.instructables.com/FF1/UOU1/H5JVONY6/FF1UOU1H5JVONY6.SQUARE.jpg http://cdn.instructables.com/FF1/UOU1/H5JVONY6/FF1UOU1H5JVONY6.SMALL.jpg Emacheen22 Welcome ladies and gents! As an entrepreneur, I'm always looking for great projects to share.  Myself and two other classmates recently put together a project for our Master's of Engineering program in Technical Entrepreneurship, and we're thrilled to share our vision with you.  Remember that old C...
By: Emacheen22

Continue Reading »]]>
Thu, 9 Aug 2012 09:41:55 PDT
Arduino Digital 7-Segment Thermometer http://www.instructables.com/id/Arduino-Digital-7-Segment-Thermometer/
Arduino Digital 7-Segment Thermometer - More DIY How To Projects]]> http://cdn.instructables.com/FID/QANU/H5EDU0VD/FIDQANUH5EDU0VD.SQUARE2.jpg http://cdn.instructables.com/FID/QANU/H5EDU0VD/FIDQANUH5EDU0VD.SQUARE.jpg http://cdn.instructables.com/FID/QANU/H5EDU0VD/FIDQANUH5EDU0VD.SMALL.jpg xBacon Hello everybody! I will be showing you how to make a digital 7-segment thermometer using the LM335 temperature sensor. This a guide for an Arduino version, but I am working on a mini ATtiny84 version. Once I get that working, I will post another Instructable on how to make it. I'm sure you could m...
By: xBacon

Continue Reading »]]>
Wed, 8 Aug 2012 10:00:42 PDT
ATtiny85/45/25 LED dice (Super simple and CHEAP!) http://www.instructables.com/id/ATtiny854525-LED-dice-Super-simple-and-CHEAP/
ATtiny85/45/25 LED dice (Super simple and CHEAP!) - More DIY How To Projects]]> http://cdn.instructables.com/FE9/MJXP/H5ENPRXE/FE9MJXPH5ENPRXE.SQUARE2.jpg http://cdn.instructables.com/FE9/MJXP/H5ENPRXE/FE9MJXPH5ENPRXE.SQUARE.jpg http://cdn.instructables.com/FE9/MJXP/H5ENPRXE/FE9MJXPH5ENPRXE.SMALL.jpg xBacon If you have looked at my 5 LED ATtiny85 POV display, we programmed the ATtiny with the Arduino. (If you haven't seen it, click here) We will be doing the same thing for this LED Dice project. The total parts cost for this project is about $5-$10. (Not including the Arduino board and the tools.) It...
By: xBacon

Continue Reading »]]>
Fri, 3 Aug 2012 09:05:15 PDT
$10 ATtiny85/45 POV display!! (works really well) http://www.instructables.com/id/10-ATtiny8545-POV-display-works-really-well/
$10 ATtiny85/45 POV display!! (works really well) - More DIY How To Projects]]> http://cdn.instructables.com/FSE/AOV5/H5ECMR1R/FSEAOV5H5ECMR1R.SQUARE2.jpg http://cdn.instructables.com/FSE/AOV5/H5ECMR1R/FSEAOV5H5ECMR1R.SQUARE.jpg http://cdn.instructables.com/FSE/AOV5/H5ECMR1R/FSEAOV5H5ECMR1R.SMALL.jpg xBacon Hey guys! This is an Instructable for making your own ATtiny85/45 5 LED POV (Persistence Of Vision) display! This is my second Instructable, also for the Elemental LED contest, so drop a comment and vote it up! The total parts cost for this POV display is under $10! (If you get the parts from a wh...
By: xBacon

Continue Reading »]]>
Fri, 3 Aug 2012 06:59:35 PDT