Instructables: exploring - workshop - tools - make http://www.instructables.com Wed, 28 Sep 2016 10:29:08 PDT BLOX v1.01 Huge DIY clear work-box! (to avoid dust) http://www.instructables.com/id/Huge-DIY-Clear-Work-box-to-Avoid-Dust/
Huge DIY clear work-box! (to avoid dust) - More DIY How To Projects]]> https://cdn.instructables.com/FPP/RAS6/IRXTFDQZ/FPPRAS6IRXTFDQZ.SQUARE2.jpg https://cdn.instructables.com/FPP/RAS6/IRXTFDQZ/FPPRAS6IRXTFDQZ.SQUARE.jpg https://cdn.instructables.com/FPP/RAS6/IRXTFDQZ/FPPRAS6IRXTFDQZ.SMALL.jpg NitsanS This is super simple. It's a big clear plastic storage box that cost me £14 in a local home products store. I think this one was a 45L size. It's not perfect, but it's much better than nothing, and it has tons of space inside to move tools around. Make it: I had a spare piece of glass that fit pe...
By: NitsanS

Continue Reading »]]>
Sat, 20 Aug 2016 21:04:59 PDT
Top 10 Vise Hacks! http://www.instructables.com/id/Top-10-Vise-Hacks/
Top 10 Vise Hacks! - More DIY How To Projects]]> https://cdn.instructables.com/FOZ/J8BE/IRPPMVMB/FOZJ8BEIRPPMVMB.SQUARE2.jpg https://cdn.instructables.com/FOZ/J8BE/IRPPMVMB/FOZJ8BEIRPPMVMB.SQUARE.jpg https://cdn.instructables.com/FOZ/J8BE/IRPPMVMB/FOZJ8BEIRPPMVMB.SMALL.jpg Yonatan24 Get the most out of your Bench-Vise!After building three vises, I think I came up with enough tips, tricks, improvements, unusual uses, and hacks to stop you from getting screwed while DIY'ing (pun not intended!).In this Instructable I will show:How to make an improvised Drill-Press with a viseHow t...
By: Yonatan24

Continue Reading »]]>
Thu, 11 Aug 2016 02:43:16 PDT
Magnetic Swivel Base Vise Mount http://www.instructables.com/id/How-to-Make-a-Magnetic-Swivel-Base-Vise-Mount/
Magnetic Swivel Base Vise Mount - More DIY How To Projects]]> https://cdn.instructables.com/F5D/FM8R/IRLQQQXU/F5DFM8RIRLQQQXU.SQUARE2.jpg https://cdn.instructables.com/F5D/FM8R/IRLQQQXU/F5DFM8RIRLQQQXU.SQUARE.jpg https://cdn.instructables.com/F5D/FM8R/IRLQQQXU/F5DFM8RIRLQQQXU.SMALL.jpg Yonatan24 In my last Instructable, I showed How to Make a Wooden 6" Vise. The vise has turned out way better than I thought, so I decided that I want to mount it, which caused some problems: I didn't want to use clamps, but wanted to mount it firmly onto my workbench, and also wanted to use it as a Drill-Pres...
By: Yonatan24

Continue Reading »]]>
Tue, 9 Aug 2016 06:17:10 PDT
How to Make a Wooden 6" Bench-Vise http://www.instructables.com/id/How-to-Make-a-Wooden-6-Bench-Vise/
How to Make a Wooden 6" Bench-Vise - More DIY How To Projects]]> https://cdn.instructables.com/FSW/QP9C/IRHV2B7O/FSWQP9CIRHV2B7O.SQUARE2.jpg https://cdn.instructables.com/FSW/QP9C/IRHV2B7O/FSWQP9CIRHV2B7O.SQUARE.jpg https://cdn.instructables.com/FSW/QP9C/IRHV2B7O/FSWQP9CIRHV2B7O.SMALL.jpg Yonatan24 I have a great little vise. I use it a ton (pun not intended)! The only problem with it is that it's tiny-- It opens to a little more than 1.5"I wanted to buy a bigger vise (for my birthday), but the prices are INSANE! As a "maker", I don't think it makes sense to pay $100 to $500+ on a vise, when ...
By: Yonatan24

Continue Reading »]]>
Fri, 5 Aug 2016 12:34:01 PDT
How to Build a Twin-Screw Vise | DIY Woodworking Tools #10 http://www.instructables.com/id/How-to-Build-a-Twin-Screw-Vise-DIY-Woodworking-Too/
How to Build a Twin-Screw Vise | DIY Woodworking Tools #10 - More DIY How To Projects]]> https://cdn.instructables.com/F1L/EYGU/IR9EF4U7/F1LEYGUIR9EF4U7.SQUARE2.jpg https://cdn.instructables.com/F1L/EYGU/IR9EF4U7/F1LEYGUIR9EF4U7.SQUARE.jpg https://cdn.instructables.com/F1L/EYGU/IR9EF4U7/F1LEYGUIR9EF4U7.SMALL.jpg Yonatan24 I recently found a HUGE M20 Turnbuckle while hiking, and thought I could built myself a Twin-Screw vise with it, since I needed another big vise.The M20 Bolts from the Turnbuckle can apply several tons of force, so I think they're a great option for building a vise.Not only can a big Moxon Vise like...
By: Yonatan24

Continue Reading »]]>
Sun, 31 Jul 2016 06:07:12 PDT
DIY Face Shield (w/ Built in Safety Glasses) http://www.instructables.com/id/DIY-Face-Shield-w-Built-in-Safety-Glasses/
DIY Face Shield (w/ Built in Safety Glasses) - More DIY How To Projects]]> https://cdn.instructables.com/FNT/5KV6/IR3HIZ3L/FNT5KV6IR3HIZ3L.SQUARE2.jpg https://cdn.instructables.com/FNT/5KV6/IR3HIZ3L/FNT5KV6IR3HIZ3L.SQUARE.jpg https://cdn.instructables.com/FNT/5KV6/IR3HIZ3L/FNT5KV6IR3HIZ3L.SMALL.jpg Yonatan24 I've been wanting a face shield for all sorts of dangerous projects, but they're pretty expensive, and I can't seem to find one anyway.I originally thought of buying a sheet of Plexiglass, melting it, and then bending, but I doubt that it will work, since it will probably crack, and will ruin the op...
By: Yonatan24

Continue Reading »]]>
Tue, 26 Jul 2016 09:38:48 PDT
Drill-Powered Knife Sharpener! | DIY Woodworking Tools #9 http://www.instructables.com/id/Drill-Powered-ToolKnife-Sharpener-DIY-Woodworking-/
Drill-Powered Knife Sharpener! | DIY Woodworking Tools #9 - More DIY How To Projects]]> https://cdn.instructables.com/FNP/K08W/IQYT31D9/FNPK08WIQYT31D9.SQUARE2.jpg https://cdn.instructables.com/FNP/K08W/IQYT31D9/FNPK08WIQYT31D9.SQUARE.jpg https://cdn.instructables.com/FNP/K08W/IQYT31D9/FNPK08WIQYT31D9.SMALL.jpg Yonatan24 There is one thing that is in common with almost all of my tools, and all of our kitchen knives - They are dull.Very dull. They are about a sharp as a brick.We always buy the highest quality knives that we can afford, yet we pretty much never sharpen them. Ignoring the fact that Dull knives are more...
By: Yonatan24

Continue Reading »]]>
Sun, 24 Jul 2016 17:59:15 PDT
How to make a track saw guide for a circular saw http://www.instructables.com/id/How-to-Make-a-Track-Saw-Guide-for-a-Circular-Saw/
How to make a track saw guide for a circular saw - More DIY How To Projects]]> https://cdn.instructables.com/F8O/8VXV/IQMKIQ1F/F8O8VXVIQMKIQ1F.SQUARE2.jpg https://cdn.instructables.com/F8O/8VXV/IQMKIQ1F/F8O8VXVIQMKIQ1F.SQUARE.jpg https://cdn.instructables.com/F8O/8VXV/IQMKIQ1F/F8O8VXVIQMKIQ1F.SMALL.jpg diycreators In this Instructables I will be making a track saw guide. This guide is very stable and extremely accurate. You too can have the same experience, if done right. Hopefully my instructions are clear and easy to follow. Please for give me for any typos. Enjoy :)Check out the video for a more in depth t...
By: diycreators

Continue Reading »]]>
Thu, 14 Jul 2016 20:06:50 PDT
Make Your Own Dead-Blow Hammer! | DIY Woodworking Tools #7 http://www.instructables.com/id/Make-Your-Own-Dead-Blow-Hammer-DIY-Woodworking-Too/
Make Your Own Dead-Blow Hammer! | DIY Woodworking Tools #7 - More DIY How To Projects]]> https://cdn.instructables.com/FAH/12SO/IQI5GHLD/FAH12SOIQI5GHLD.SQUARE2.jpg https://cdn.instructables.com/FAH/12SO/IQI5GHLD/FAH12SOIQI5GHLD.SQUARE.jpg https://cdn.instructables.com/FAH/12SO/IQI5GHLD/FAH12SOIQI5GHLD.SMALL.jpg Yonatan24 A Dead-Blow Hammer is a hammer that doesn't bounce back up when hit, and less force is required when using it, because of it's weight. This type of hammer also saves a lot of time and effort, when compared to a regular mallet (soft hammer). Did you know you can make, and choose the exact weight that...
By: Yonatan24

Continue Reading »]]>
Wed, 6 Jul 2016 11:31:29 PDT
Drill Press Build http://www.instructables.com/id/Drill-Press-Build/
Drill Press Build - More DIY How To Projects]]> https://cdn.instructables.com/F8K/PAGD/IQ5PSTY0/F8KPAGDIQ5PSTY0.SQUARE2.jpg https://cdn.instructables.com/F8K/PAGD/IQ5PSTY0/F8KPAGDIQ5PSTY0.SQUARE.jpg https://cdn.instructables.com/F8K/PAGD/IQ5PSTY0/F8KPAGDIQ5PSTY0.SMALL.jpg simplerandom Homemade drill press build.
By: simplerandom

Continue Reading »]]>
Mon, 4 Jul 2016 05:23:39 PDT
Rubber Wedding Ring http://www.instructables.com/id/Rubber-Wedding-Ring/
Rubber Wedding Ring - More DIY How To Projects]]> https://cdn.instructables.com/F9J/EQIL/IPJTGISN/F9JEQILIPJTGISN.SQUARE2.jpg https://cdn.instructables.com/F9J/EQIL/IPJTGISN/F9JEQILIPJTGISN.SQUARE.jpg https://cdn.instructables.com/F9J/EQIL/IPJTGISN/F9JEQILIPJTGISN.SMALL.jpg seamster My wife tolerates the fact that I've never worn a wedding ring. I don't get along with rings for a couple of reasons: I have chunky fat-baby hands. This makes any kind of ring-wearing annoying, as there's zero clearance between my stubby fingers when I'm trying to hold any kind of tool.I work with m...
By: seamster

Continue Reading »]]>
Fri, 17 Jun 2016 18:14:04 PDT
Ultimate Workbench http://www.instructables.com/id/Ultimate-Workbench/
Ultimate Workbench - More DIY How To Projects]]> https://cdn.instructables.com/FGC/L7YE/IPIK5MNU/FGCL7YEIPIK5MNU.SQUARE2.jpg https://cdn.instructables.com/FGC/L7YE/IPIK5MNU/FGCL7YEIPIK5MNU.SQUARE.jpg https://cdn.instructables.com/FGC/L7YE/IPIK5MNU/FGCL7YEIPIK5MNU.SMALL.jpg mikeasaurus The ultimate workbench is your go-to place when you need to get a job done. It's got a solid wood work surface, great lighting, a vice to hold down your work, and of course all the important tools at the ready in drawers underneath. Also, it's on casters. Which is really the best part about this wor...
By: mikeasaurus

Continue Reading »]]>
Thu, 16 Jun 2016 10:18:09 PDT
The Flat-Pack Bandsaw | DIY Woodworking Tools #6 http://www.instructables.com/id/Building-the-Flat-Pack-Bandsaw-AKA-the-Jigsaw-Tabl/
The Flat-Pack Bandsaw | DIY Woodworking Tools #6 - More DIY How To Projects]]> https://cdn.instructables.com/FHA/OIOF/IO6DY2C5/FHAOIOFIO6DY2C5.SQUARE2.jpg https://cdn.instructables.com/FHA/OIOF/IO6DY2C5/FHAOIOFIO6DY2C5.SQUARE.jpg https://cdn.instructables.com/FHA/OIOF/IO6DY2C5/FHAOIOFIO6DY2C5.SMALL.jpg Yonatan24 Even before I started woodworking, I wanted one of those tiny Circular-Saws. I also wanted a Bandsaw. Unfortunately (As always), It was pretty expensive, And I couldn't afford them.But... What I did later remember, Is that I did have a Jigsaw that my dad bought almost 10 years ago. I decided to use ...
By: Yonatan24

Continue Reading »]]>
Sat, 14 May 2016 12:46:39 PDT
How to Make a Magnetic Honing Guide (For Sharpening Chisels & Hand Planes) | DIY Woodworking Tools #5 http://www.instructables.com/id/How-to-Make-a-Magnetic-Honing-Guide-For-Sharpening/
How to Make a Magnetic Honing Guide (For Sharpening Chisels & Hand Planes) | DIY Woodworking Tools #5 - More DIY How To Projects]]> https://cdn.instructables.com/FHE/0AYM/INYS53PR/FHE0AYMINYS53PR.SQUARE2.jpg https://cdn.instructables.com/FHE/0AYM/INYS53PR/FHE0AYMINYS53PR.SQUARE.jpg https://cdn.instructables.com/FHE/0AYM/INYS53PR/FHE0AYMINYS53PR.SMALL.jpg Yonatan24 "When the [wood's] grain tears out, I wanna tear my hair out." - GmoonWhile this problem does not occur because of Trichotillomania, It definitely does happen because you aren't sharpening your Hand-Planes correctly.An easy way to hold a Hand-Plane, Or a Chisel in place while sharpening, Is by using...
By: Yonatan24

Continue Reading »]]>
Mon, 9 May 2016 10:36:52 PDT
How to Make Vacuum Cleaner http://www.instructables.com/id/How-to-Make-Vacuum-Cleaner-1/
How to Make Vacuum Cleaner - More DIY How To Projects]]> https://cdn.instructables.com/FQG/Y7IN/INNGOBFT/FQGY7ININNGOBFT.SQUARE2.jpg https://cdn.instructables.com/FQG/Y7IN/INNGOBFT/FQGY7ININNGOBFT.SQUARE.jpg https://cdn.instructables.com/FQG/Y7IN/INNGOBFT/FQGY7ININNGOBFT.SMALL.jpg abedmoghari How to make vacuum cleanerTools:1- Small fan (from battery charger)2- Cartoon or plastic Tube3- Nebulizer (From pharmacy)4- Push button5- Permeable clothWatch The video and enjoy Don't forget to like
By: abedmoghari

Continue Reading »]]>
Sun, 1 May 2016 08:27:06 PDT
Make a Panel Gauge http://www.instructables.com/id/Make-a-Panel-Gauge/
Make a Panel Gauge - More DIY How To Projects]]> https://cdn.instructables.com/FNY/60AN/INNEIEK3/FNY60ANINNEIEK3.SQUARE2.jpg https://cdn.instructables.com/FNY/60AN/INNEIEK3/FNY60ANINNEIEK3.SQUARE.jpg https://cdn.instructables.com/FNY/60AN/INNEIEK3/FNY60ANINNEIEK3.SMALL.jpg WOmadeOD If you want to mark lines parallel to an edge, you need a panel gauge.They're easy to make out of any scraps you have lying around the workshop, and I'll explain how in the following steps.If you would like to see this one being made, then I have a video here:A SketchUp model is also available to do...
By: WOmadeOD

Continue Reading »]]>
Sat, 30 Apr 2016 16:52:01 PDT
Alternative method to properly drive insert nuts in hard wood http://www.instructables.com/id/Alternative-Method-to-Properly-Drive-Insert-Nuts-i/
Alternative method to properly drive insert nuts in hard wood - More DIY How To Projects]]> https://cdn.instructables.com/F1E/LXO6/INM7JCHS/F1ELXO6INM7JCHS.SQUARE2.jpg https://cdn.instructables.com/F1E/LXO6/INM7JCHS/F1ELXO6INM7JCHS.SQUARE.jpg https://cdn.instructables.com/F1E/LXO6/INM7JCHS/F1ELXO6INM7JCHS.SMALL.jpg MakinThings The goal of this ible is to show you how to use threaded inserts in different types of wood. I will also show you how to do so without buying the specialized insertion driver. Although the special driver is inexpensive, I find that the soft brass often shears when trying to use the insert driver in ...
By: MakinThings

Continue Reading »]]>
Sat, 30 Apr 2016 07:17:33 PDT
How to Restore a Drill-Press Stand (Aka RIP'ing its Rust) http://www.instructables.com/id/How-to-Restore-a-Drill-Press-Stand-Aka-RIPing-Its-/
How to Restore a Drill-Press Stand (Aka RIP'ing its Rust) - More DIY How To Projects]]> https://cdn.instructables.com/F4S/DBDU/IN7ON00F/F4SDBDUIN7ON00F.SQUARE2.jpg https://cdn.instructables.com/F4S/DBDU/IN7ON00F/F4SDBDUIN7ON00F.SQUARE.jpg https://cdn.instructables.com/F4S/DBDU/IN7ON00F/F4SDBDUIN7ON00F.SMALL.jpg Yonatan24 I would say that this Drill-Press Stand looks horrible, But Drill-Press Stands might have feelings, So I'm not going to say that.I might as well also get an award for that-- The last thing you need to make a Drill-Press Stand cry, The salt in the tears would make it rust even more!I recently found a...
By: Yonatan24

Continue Reading »]]>
Tue, 19 Apr 2016 12:04:30 PDT
Make Your Own Hot-Glue Mallet! (Rubber Hammer) | DIY Woodworking Tools #4 http://www.instructables.com/id/Make-Your-Own-Hot-Glue-Mallet-Rubber-Hammer-DIY-Wo/
Make Your Own Hot-Glue Mallet! (Rubber Hammer) | DIY Woodworking Tools #4 - More DIY How To Projects]]> https://cdn.instructables.com/F6P/K3XE/IMV8LFVR/F6PK3XEIMV8LFVR.SQUARE2.jpg https://cdn.instructables.com/F6P/K3XE/IMV8LFVR/F6PK3XEIMV8LFVR.SQUARE.jpg https://cdn.instructables.com/F6P/K3XE/IMV8LFVR/F6PK3XEIMV8LFVR.SMALL.jpg Yonatan24 Why would I buy a Rubber Mallet? Why should I pay almost $10 for a small piece of rubber and a handle?Well, I can make one with several sticks of Hot-Glue!In my experiments, A Rubber Mallet is even BETTER than a Wooden Mallet for Chisel-work. Keep this in mind, Fellow Woodworkers! ;)This project was...
By: Yonatan24

Continue Reading »]]>
Mon, 11 Apr 2016 11:23:24 PDT
How to Build a Wooden Drill-Press Vise | DIY Woodworking Tools #3 http://www.instructables.com/id/How-to-Make-the-Ultimate-Wooden-Vise-DIY-Woodworki/
How to Build a Wooden Drill-Press Vise | DIY Woodworking Tools #3 - More DIY How To Projects]]> https://cdn.instructables.com/FWB/IXRF/IMMFFO1Z/FWBIXRFIMMFFO1Z.SQUARE2.jpg https://cdn.instructables.com/FWB/IXRF/IMMFFO1Z/FWBIXRFIMMFFO1Z.SQUARE.jpg https://cdn.instructables.com/FWB/IXRF/IMMFFO1Z/FWBIXRFIMMFFO1Z.SMALL.jpg Yonatan24 I've been needing another vise for quite a long time now. I have one vise, Which is in my room (My room serves as a workshop). Sometimes, When I do messier projects, Such as ones with a lot of sawdust, I prefer doing them in our balcony. Because I have one vise, And it is pretty difficult to remove ...
By: Yonatan24

Continue Reading »]]>
Mon, 4 Apr 2016 01:19:13 PDT
Make Your Own Wooden C-Clamp! | DIY Woodworking Tools #2 http://www.instructables.com/id/Make-Your-Own-Wooden-C-Clamp-DIY-Woodworking-Tools/
Make Your Own Wooden C-Clamp! | DIY Woodworking Tools #2 - More DIY How To Projects]]> https://cdn.instructables.com/FGT/4EK6/ILL5TCF6/FGT4EK6ILL5TCF6.SQUARE2.jpg https://cdn.instructables.com/FGT/4EK6/ILL5TCF6/FGT4EK6ILL5TCF6.SQUARE.jpg https://cdn.instructables.com/FGT/4EK6/ILL5TCF6/FGT4EK6ILL5TCF6.SMALL.jpg Yonatan24 C-Clamps are so expensive! Did you see that price tag last time you were at the store?I don't have a very big budget for projects, So I make most of my tools. That's why I'm going to show you how to make a perfect woodworking C-Clamp, Using only hand tools! What's better than making an extremely use...
By: Yonatan24

Continue Reading »]]>
Thu, 10 Mar 2016 07:02:11 PST
How to Make a Mini Dremel Tool http://www.instructables.com/id/How-to-Make-a-Mini-Dremel-Tool/
How to Make a Mini Dremel Tool - More DIY How To Projects]]> https://cdn.instructables.com/FUK/PGXF/ILFFXXOD/FUKPGXFILFFXXOD.SQUARE2.jpg https://cdn.instructables.com/FUK/PGXF/ILFFXXOD/FUKPGXFILFFXXOD.SQUARE.jpg https://cdn.instructables.com/FUK/PGXF/ILFFXXOD/FUKPGXFILFFXXOD.SMALL.jpg vlad881 Good whatever time of day it is where you are, my friends! In this video I am going to show you a great idea how you can make a mini dremel tool from almost any thing of naught.That is all folks I wished to share with you! Please subscribe to my YouTube channel with some more interesting video stori...
By: vlad881

Continue Reading »]]>
Sat, 5 Mar 2016 13:05:42 PST
A Simple Marking Knife http://www.instructables.com/id/A-Simple-Marking-Knife/
A Simple Marking Knife - More DIY How To Projects]]> https://cdn.instructables.com/FDQ/SR7I/ILCH96J4/FDQSR7IILCH96J4.SQUARE2.jpg https://cdn.instructables.com/FDQ/SR7I/ILCH96J4/FDQSR7IILCH96J4.SQUARE.jpg https://cdn.instructables.com/FDQ/SR7I/ILCH96J4/FDQSR7IILCH96J4.SMALL.jpg RecklessRedneckWoodWorks Necessity is the mother of invention, or so they say. Well, this is a prime example. Someone kept stealing my pencils in the shop, So I made a simple marking knife to use instead. They are more accurate anyways. Don't forget to like and subscribe.Check us out on facebook : https://www.facebook.com/r...
By: RecklessRedneckWoodWorks

Continue Reading »]]>
Thu, 3 Mar 2016 10:39:31 PST
Magnetic Bit Storage On A Drill http://www.instructables.com/id/Magnetic-Bit-Storage-on-a-Drill/
Magnetic Bit Storage On A Drill - More DIY How To Projects]]> https://cdn.instructables.com/FHO/6EML/IL8LHYP5/FHO6EMLIL8LHYP5.SQUARE2.jpg https://cdn.instructables.com/FHO/6EML/IL8LHYP5/FHO6EMLIL8LHYP5.SQUARE.jpg https://cdn.instructables.com/FHO/6EML/IL8LHYP5/FHO6EMLIL8LHYP5.SMALL.jpg Yonatan24 I think almost everyone that has a drill can agree with me that losing a bit or a screw while making a project is the worst thing that could ever happen. EVER!I decided that I want to keep the bits that I used most often on my drill so they won't get lost, Using magnets. This also makes it really ea...
By: Yonatan24

Continue Reading »]]>
Tue, 1 Mar 2016 10:30:48 PST
Make Your Own Plywood Mallet! | DIY Woodworking Tools #1 http://www.instructables.com/id/Make-a-Your-Own-Woodwoking-Mallet-W-Leftover-Plywo/
Make Your Own Plywood Mallet! | DIY Woodworking Tools #1 - More DIY How To Projects]]> https://cdn.instructables.com/FIY/S7CA/IKBFO4OI/FIYS7CAIKBFO4OI.SQUARE2.jpg https://cdn.instructables.com/FIY/S7CA/IKBFO4OI/FIYS7CAIKBFO4OI.SQUARE.jpg https://cdn.instructables.com/FIY/S7CA/IKBFO4OI/FIYS7CAIKBFO4OI.SMALL.jpg Yonatan24 In the last few weeks, I've noticed that my interest has been moving a lot into woodworking projects*, I found that we have several woodworking tools that I forgot we had: A "Rasp", A "Rasp Planer", And some "Chisels".These chisels caught my eye: They are around 30 years old! I sharpened them and st...
By: Yonatan24

Continue Reading »]]>
Wed, 3 Feb 2016 09:27:44 PST
How to Double Scrollsaw Blade Life! http://www.instructables.com/id/How-to-Double-Scrollsaw-Blade-Life/
How to Double Scrollsaw Blade Life! - More DIY How To Projects]]> https://cdn.instructables.com/F83/R9NJ/IJX585UR/F83R9NJIJX585UR.SQUARE2.jpg https://cdn.instructables.com/F83/R9NJ/IJX585UR/F83R9NJIJX585UR.SQUARE.jpg https://cdn.instructables.com/F83/R9NJ/IJX585UR/F83R9NJIJX585UR.SMALL.jpg NelsonStudios Scroll saws get used in very predictable ways most of the time. Intricate cuts on thin material. All blades have a working lifespan and as those teeth start to get dull the quality of the cut starts to suffer. Next thing you know you are discarding a blade that has a dull spot in the middle but f...
By: NelsonStudios

Continue Reading »]]>
Wed, 27 Jan 2016 15:01:04 PST
Ziptie Arm Light http://www.instructables.com/id/Ziptie-Arm-Light/
Ziptie Arm Light - More DIY How To Projects]]> https://cdn.instructables.com/FH8/W6TA/IJUCN9JD/FH8W6TAIJUCN9JD.SQUARE2.jpg https://cdn.instructables.com/FH8/W6TA/IJUCN9JD/FH8W6TAIJUCN9JD.SQUARE.jpg https://cdn.instructables.com/FH8/W6TA/IJUCN9JD/FH8W6TAIJUCN9JD.SMALL.jpg Frenchtoast Here is a problem some people may have. It's dark out. You have to do a job that requires both hands. You are all by yourself. How do you hold the flashlight? Introducing the ziptie arm light. It holds your light while you work. It also solves many other problems. You Will Need: -7 zipties-flashl...
By: Frenchtoast

Continue Reading »]]>
Mon, 25 Jan 2016 19:48:29 PST
Make Lockpick Tools http://www.instructables.com/id/Make-Lockpick-Tools/
Make Lockpick Tools - More DIY How To Projects]]> https://cdn.instructables.com/FZ6/RXFJ/IJKCM5VR/FZ6RXFJIJKCM5VR.SQUARE2.jpg https://cdn.instructables.com/FZ6/RXFJ/IJKCM5VR/FZ6RXFJIJKCM5VR.SQUARE.jpg https://cdn.instructables.com/FZ6/RXFJ/IJKCM5VR/FZ6RXFJIJKCM5VR.SMALL.jpg tomkio101 Hi in this video i show you how to make any type of lockpickyou will need : a Dremel hacksaw blade an allen keybench grindersome waterBE RESPONSABLE .
By: tomkio101

Continue Reading »]]>
Tue, 19 Jan 2016 08:39:57 PST
Magnetic Vise Soft Jaws (w/ Silicone Adhesive) http://www.instructables.com/id/Magnetic-Soft-Jaws-for-Your-Vise-Using-Silicone-Ad/
Magnetic Vise Soft Jaws (w/ Silicone Adhesive) - More DIY How To Projects]]> https://cdn.instructables.com/FU5/3C0O/IJQNYPPV/FU53C0OIJQNYPPV.SQUARE2.jpg https://cdn.instructables.com/FU5/3C0O/IJQNYPPV/FU53C0OIJQNYPPV.SQUARE.jpg https://cdn.instructables.com/FU5/3C0O/IJQNYPPV/FU53C0OIJQNYPPV.SMALL.jpg Yonatan24 I was recently given a very old vise from my grandpa, I started using it, And for most projects, It's an amazing must have tool!The problem with vises is that they have serrated jaws, Which are very aggressive and can leave marks on your work, Whether it's Wood, Metal, Or anything else.After looking...
By: Yonatan24

Continue Reading »]]>
Sat, 9 Jan 2016 01:09:15 PST
How to make a mini Gas-jet (up to 1000ºC) http://www.instructables.com/id/How-to-make-a-mini-Gas-jet-up-to-1000ºC/
How to make a mini Gas-jet (up to 1000ºC) - More DIY How To Projects]]> https://cdn.instructables.com/FQZ/U12J/IHLVODYC/FQZU12JIHLVODYC.SQUARE2.jpg https://cdn.instructables.com/FQZ/U12J/IHLVODYC/FQZU12JIHLVODYC.SQUARE.jpg https://cdn.instructables.com/FQZ/U12J/IHLVODYC/FQZU12JIHLVODYC.SMALL.jpg romanursuhack https://youtu.be/tuj6_RC9sKo To do such Gas-jet you need!!! With the turned on blowing the gas-jet has a good heating power, it can set alight a plumbeous pellet in a few seconds (up to 1000ºС)! Step and step how to make!!! In conclusion I'd like to say: this gas-jet may be improved by inst...
By: romanursuhack

Continue Reading »]]>
Mon, 30 Nov 2015 10:47:30 PST
Homemade HAND DRILL http://www.instructables.com/id/Homemade-HAND-DRILL/
Homemade HAND DRILL - More DIY How To Projects]]> https://cdn.instructables.com/F8J/C26R/IPVHANIR/F8JC26RIPVHANIR.SQUARE2.jpg https://cdn.instructables.com/F8J/C26R/IPVHANIR/F8JC26RIPVHANIR.SQUARE.jpg https://cdn.instructables.com/F8J/C26R/IPVHANIR/F8JC26RIPVHANIR.SMALL.jpg Curiositydrive check this awesome diy on homemade HAND DRILL !!Click here for hand drill..Click here for making Grinder from fan happy making !!
By: Curiositydrive

Continue Reading »]]>
Tue, 17 Nov 2015 04:34:59 PST
Make a SCREW DRIVER from Scrap http://www.instructables.com/id/Make-a-SCREW-DRIVER-from-Scrap/
Make a SCREW DRIVER from Scrap - More DIY How To Projects]]> https://cdn.instructables.com/FZW/RU6B/IH0YI2AA/FZWRU6BIH0YI2AA.SQUARE2.jpg https://cdn.instructables.com/FZW/RU6B/IH0YI2AA/FZWRU6BIH0YI2AA.SQUARE.jpg https://cdn.instructables.com/FZW/RU6B/IH0YI2AA/FZWRU6BIH0YI2AA.SMALL.jpg Curiositydrive check this for making a Screw Driver made from scrap using self made tools.... HAPPY MAKING!!Also check my other projects like making a Grinder from fan and. Making a HAND DRILL..... EtcClick here for screw driver.Click here for hand drill.Click here for table fan Grinder making videos..
By: Curiositydrive

Continue Reading »]]>
Mon, 16 Nov 2015 06:02:51 PST
Make a Youtube video on the cheap http://www.instructables.com/id/Make-a-Youtube-video-on-the-cheap/
Make a Youtube video on the cheap - More DIY How To Projects]]> https://cdn.instructables.com/FLT/YCK6/IF7IO29K/FLTYCK6IF7IO29K.SQUARE2.jpg https://cdn.instructables.com/FLT/YCK6/IF7IO29K/FLTYCK6IF7IO29K.SQUARE.jpg https://cdn.instructables.com/FLT/YCK6/IF7IO29K/FLTYCK6IF7IO29K.SMALL.jpg EnnioP Hi! A couple of days ago I've uploaded a video on youtubeIt's not perfect but it's not bad eitherI'll show you the gear I've bought and why I choose themthen I'll talk to you about the editing hope you'll like it Gears to make you feel like a pro without ruining the bank :) For starters I wante...
By: EnnioP

Continue Reading »]]>
Thu, 1 Oct 2015 04:58:04 PDT
Making Dowel Rods With a Table Saw http://www.instructables.com/id/Making-Dowel-Rods-With-a-Table-Saw/
Making Dowel Rods With a Table Saw - More DIY How To Projects]]> https://cdn.instructables.com/FOZ/IUQ5/IDYPD9F1/FOZIUQ5IDYPD9F1.SQUARE2.jpg https://cdn.instructables.com/FOZ/IUQ5/IDYPD9F1/FOZIUQ5IDYPD9F1.SQUARE.jpg https://cdn.instructables.com/FOZ/IUQ5/IDYPD9F1/FOZIUQ5IDYPD9F1.SMALL.jpg gadgetjim There are times when you may need a Dowel Rod made out of a particular variety of wood for a project, or an extra long length. Or maybe, like me, you like to make things yourself. This Instructable will explain how to make a fixture to make your own, custom dowel rods. Getting Started and Require...
By: gadgetjim

Continue Reading »]]>
Sun, 30 Aug 2015 20:21:32 PDT
Homemade Mini Lathe Aluminium Alloy with Slide CNC Linear Ball Bearing Motion Bearing http://www.instructables.com/id/Homemade-Mini-Lathe-Aluminium-Alloy-with-Slide-CNC/
Homemade Mini Lathe Aluminium Alloy with Slide CNC Linear Ball Bearing Motion Bearing - More DIY How To Projects]]> https://cdn.instructables.com/FG6/HV0K/IAWCF5GB/FG6HV0KIAWCF5GB.SQUARE2.jpg https://cdn.instructables.com/FG6/HV0K/IAWCF5GB/FG6HV0KIAWCF5GB.SQUARE.jpg https://cdn.instructables.com/FG6/HV0K/IAWCF5GB/FG6HV0KIAWCF5GB.SMALL.jpg joulethief669 Homemade Mini Lathe Aluminium Alloy with Slide CNC Linear Ball Bearing Motion BearingParts and Tools:Wood MDF 200 mm x 650 mm x 20 mm 2pcs SCS10UU 20 mm Linear Ball Bearing Motion Bearing CNC 2pcs 500 mm 20 mm Linear Rails 1 Pcs 530 mm x 140 mm x 12 mm Aluminium Alloy 60612 Pcs 60 mm x 140 mm x 12 ...
By: joulethief669

Continue Reading »]]>
Sat, 13 Jun 2015 07:27:46 PDT
Homemade wood mini lathe with hand Drill http://www.instructables.com/id/Homemade-wood-mini-lathe-with-hand-Drill/
Homemade wood mini lathe with hand Drill - More DIY How To Projects]]> https://cdn.instructables.com/FNY/81QC/I9QWKARN/FNY81QCI9QWKARN.SQUARE2.jpg https://cdn.instructables.com/FNY/81QC/I9QWKARN/FNY81QCI9QWKARN.SQUARE.jpg https://cdn.instructables.com/FNY/81QC/I9QWKARN/FNY81QCI9QWKARN.SMALL.jpg joulethief669 Homemade wood mini lathe by hand Drill very easy and cheap with old hand drill, Aluminium Alloy Profile 600 mm x 80 mm x 40 mm2 pcs Aluminium Alloy 6061 160 mm x 600 mm x 12 mm1 pcs Aluminium Alloy 6061 80 mm x 80 mm x 12 mm1 pcs Aluminium Alloy 6061 160 mm x 80 mm x 12 mm1 old drill broken and 1 1 ...
By: joulethief669

Continue Reading »]]>
Fri, 15 May 2015 09:13:49 PDT
Marking Pen Airbrush http://www.instructables.com/id/Marking-Pen-Airbrush/
Marking Pen Airbrush - More DIY How To Projects]]> https://cdn.instructables.com/FGD/38UI/I9N3M91Y/FGD38UII9N3M91Y.SQUARE2.jpg https://cdn.instructables.com/FGD/38UI/I9N3M91Y/FGD38UII9N3M91Y.SQUARE.jpg https://cdn.instructables.com/FGD/38UI/I9N3M91Y/FGD38UII9N3M91Y.SMALL.jpg TabLeft Super simple diy airbrush using marker pens. You can use just about any marker or paint pen in this, and it dries instantly with no clean up. This is powered by a small air compressor and built on a cheap air nozzle from Lowes.== Body == Its just two two holes intersecting at 45 degrees and a coup...
By: TabLeft

Continue Reading »]]>
Wed, 13 May 2015 15:26:51 PDT
DIY Stamp http://www.instructables.com/id/DIY-Stamp-1/
DIY Stamp - More DIY How To Projects]]> https://cdn.instructables.com/FXU/FKM7/I9N3M89M/FXUFKM7I9N3M89M.SQUARE2.jpg https://cdn.instructables.com/FXU/FKM7/I9N3M89M/FXUFKM7I9N3M89M.SQUARE.jpg https://cdn.instructables.com/FXU/FKM7/I9N3M89M/FXUFKM7I9N3M89M.SMALL.jpg TabLeft Made this whole project from junk laying about in my garage. Friends and family have been getting on me about not signing or branding any of my work so I thought I would make a quick stamp of the TL from my logo.If you wondering about the face in the drawer check out Steve Carmichael https://www.y...
By: TabLeft

Continue Reading »]]>
Wed, 13 May 2015 15:22:28 PDT
Sharpening Stone Caddy http://www.instructables.com/id/Sharpening-Stone-Caddy/
Sharpening Stone Caddy - More DIY How To Projects]]> https://cdn.instructables.com/F7V/URV2/I9N3M6XD/F7VURV2I9N3M6XD.SQUARE2.jpg https://cdn.instructables.com/F7V/URV2/I9N3M6XD/F7VURV2I9N3M6XD.SQUARE.jpg https://cdn.instructables.com/F7V/URV2/I9N3M6XD/F7VURV2I9N3M6XD.SMALL.jpg TabLeft This is a simple sharpening stone caddy to hold my diamond plates and strop when not in use. It holds the active sharpening stone in the top recess for quick touch ups when using chisels etc.
By: TabLeft

Continue Reading »]]>
Wed, 13 May 2015 15:16:10 PDT
Marking Knife http://www.instructables.com/id/Marking-Knife/
Marking Knife - More DIY How To Projects]]> https://cdn.instructables.com/FPD/HST4/I9N3M651/FPDHST4I9N3M651.SQUARE2.jpg https://cdn.instructables.com/FPD/HST4/I9N3M651/FPDHST4I9N3M651.SQUARE.jpg https://cdn.instructables.com/FPD/HST4/I9N3M651/FPDHST4I9N3M651.SMALL.jpg TabLeft Making a marking knife from an old tree branch and an old reciprocating saw blade
By: TabLeft

Continue Reading »]]>
Wed, 13 May 2015 15:08:33 PDT
DIY How to Make a Sawhorse http://www.instructables.com/id/DIY-How-to-Make-a-Sawhorse/
DIY How to Make a Sawhorse - More DIY How To Projects]]> https://cdn.instructables.com/FB6/7W7S/I7GS3NHB/FB67W7SI7GS3NHB.SQUARE2.jpg https://cdn.instructables.com/FB6/7W7S/I7GS3NHB/FB67W7SI7GS3NHB.SQUARE.jpg https://cdn.instructables.com/FB6/7W7S/I7GS3NHB/FB67W7SI7GS3NHB.SMALL.jpg dhruv.516 Learning how to make a sawhorse is a very basic woodworking project. They can be made with all manner of wood and be any number of different sizes. The nice thing about making your own sawhorses is you can build them exactly the size you need, so you can make big ones to hold a table, small ones for...
By: dhruv.516

Continue Reading »]]>
Mon, 16 Mar 2015 09:22:04 PDT
Turn a Mint Tin Into a Belt Holster for Screwdrivers http://www.instructables.com/id/Turn-a-Mint-Tin-Into-a-Belt-Caddy-for-Screwdrivers/
Turn a Mint Tin Into a Belt Holster for Screwdrivers - More DIY How To Projects]]> https://cdn.instructables.com/FYE/B9LS/I6RSRDHF/FYEB9LSI6RSRDHF.SQUARE2.jpg https://cdn.instructables.com/FYE/B9LS/I6RSRDHF/FYEB9LSI6RSRDHF.SQUARE.jpg https://cdn.instructables.com/FYE/B9LS/I6RSRDHF/FYEB9LSI6RSRDHF.SMALL.jpg M3G It seems like the moment you put down a screwdriver it disappears. You put it beside whatever you're working on, switch tools, and two minutes later when you need to switch back the screwdriver has jumped through a portal to another dimension. I hate misplacing tools, so I decided to come up with a ...
By: M3G

Continue Reading »]]>
Tue, 3 Mar 2015 07:20:51 PST
How To Make A Mallet From Milk Jugs! http://www.instructables.com/id/How-To-Make-A-Mallet-From-Milk-Jugs/
How To Make A Mallet From Milk Jugs! - More DIY How To Projects]]> https://cdn.instructables.com/FDY/SJU1/I6C2JWFN/FDYSJU1I6C2JWFN.SQUARE2.jpg https://cdn.instructables.com/FDY/SJU1/I6C2JWFN/FDYSJU1I6C2JWFN.SQUARE.jpg https://cdn.instructables.com/FDY/SJU1/I6C2JWFN/FDYSJU1I6C2JWFN.SMALL.jpg kludge77 HDPE is the plastic used in many household containers including gallon sized milk jugs. I made an Instructable a while back on the processing of HDPE using a blender and toaster oven. Well, I've been banned from touching the kitchen blender! So now I'm just rough cutting the plastic with a razor kni...
By: kludge77

Continue Reading »]]>
Thu, 19 Feb 2015 09:15:49 PST
Drill Dust Stopper http://www.instructables.com/id/Drill-Dust-Stopper/
Drill Dust Stopper - More DIY How To Projects]]> https://cdn.instructables.com/FMA/4OA5/I5WCS912/FMA4OA5I5WCS912.SQUARE2.jpg https://cdn.instructables.com/FMA/4OA5/I5WCS912/FMA4OA5I5WCS912.SQUARE.jpg https://cdn.instructables.com/FMA/4OA5/I5WCS912/FMA4OA5I5WCS912.SMALL.jpg Engineer of None If you ever drill a hole in the wall to hang something, you know the feeling off having dust all over the flour and having to cleaning everting.On this instructables i show you how to make a small gadget on the budget to avoid making a mess everytime we drill a hole in the wall. Watch the video ...
By: Engineer of None

Continue Reading »]]>
Sun, 8 Feb 2015 16:06:45 PST
Workshop Oil Hack http://www.instructables.com/id/Workshop-Oil-Hack/
Workshop Oil Hack - More DIY How To Projects]]> https://cdn.instructables.com/F6H/MTI0/I5GNA3YA/F6HMTI0I5GNA3YA.SQUARE2.jpg https://cdn.instructables.com/F6H/MTI0/I5GNA3YA/F6HMTI0I5GNA3YA.SQUARE.jpg https://cdn.instructables.com/F6H/MTI0/I5GNA3YA/F6HMTI0I5GNA3YA.SMALL.jpg TabLeft Tip to aerosolize shop oils that are either not available or cost prohibitive to buy in spray form.
By: TabLeft

Continue Reading »]]>
Tue, 27 Jan 2015 14:10:55 PST
Cheap Drill Conversion http://www.instructables.com/id/Cheap-Drill-Conversion/
Cheap Drill Conversion - More DIY How To Projects]]> https://cdn.instructables.com/FYP/3FSS/I53I1JQX/FYP3FSSI53I1JQX.SQUARE2.jpg https://cdn.instructables.com/FYP/3FSS/I53I1JQX/FYP3FSSI53I1JQX.SQUARE.jpg https://cdn.instructables.com/FYP/3FSS/I53I1JQX/FYP3FSSI53I1JQX.SMALL.jpg transistor2 This is a super easy way to make your cheap drill run as either a corded or cordless drill, that way you dont have to throw away the battery. It took me about 15 minutes to do it and it can be done with just about any drill. What you will need. Any drill that is battery operated expensive or chea...
By: transistor2

Continue Reading »]]>
Mon, 19 Jan 2015 17:25:15 PST
Best DIY Dremel Sander Ever http://www.instructables.com/id/Best-Dremel-Sander-Ever/
Best DIY Dremel Sander Ever - More DIY How To Projects]]> https://cdn.instructables.com/FBN/TGEM/I2LMMFJO/FBNTGEMI2LMMFJO.SQUARE2.jpg https://cdn.instructables.com/FBN/TGEM/I2LMMFJO/FBNTGEMI2LMMFJO.SQUARE.jpg https://cdn.instructables.com/FBN/TGEM/I2LMMFJO/FBNTGEMI2LMMFJO.SMALL.jpg lsp123 This is probably the cheapest and best Dremel sander you can make without any modification. It is really safe since its just soft plastic it is well balanced and most of all no weight at all so no unnecessary vibration. This Is What I Used Spice bottle top Dremel mandrel Double sided tape Sandp...
By: lsp123

Continue Reading »]]>
Wed, 19 Nov 2014 10:51:48 PST
Drill down the center of bar stock http://www.instructables.com/id/Drill-down-the-center-of-bar-stock/
Drill down the center of bar stock - More DIY How To Projects]]> https://cdn.instructables.com/FB7/IOLX/I2R9VXO6/FB7IOLXI2R9VXO6.SQUARE2.jpg https://cdn.instructables.com/FB7/IOLX/I2R9VXO6/FB7IOLXI2R9VXO6.SQUARE.jpg https://cdn.instructables.com/FB7/IOLX/I2R9VXO6/FB7IOLXI2R9VXO6.SMALL.jpg TabLeft Quick tip for drilling down the center of a dowel or bar stock for making bearings, bushings, nozzles, adapters, pipe stems, toys, etc. accurately.
By: TabLeft

Continue Reading »]]>
Wed, 19 Nov 2014 09:11:42 PST
How to Make a Mini Retractable Metal Saw http://www.instructables.com/id/How-to-Make-a-Mini-Retractable-Metal-Saw/
How to Make a Mini Retractable Metal Saw - More DIY How To Projects]]> https://cdn.instructables.com/F0E/DB0E/I1IQB3FJ/F0EDB0EI1IQB3FJ.SQUARE2.jpg https://cdn.instructables.com/F0E/DB0E/I1IQB3FJ/F0EDB0EI1IQB3FJ.SQUARE.jpg https://cdn.instructables.com/F0E/DB0E/I1IQB3FJ/F0EDB0EI1IQB3FJ.SMALL.jpg Von Malegowski I show how to make a small retractable metal saw out of a box cutter and a hacksaw blade. This is very simple to make and requires fairly common materials. It is more portable and convenient then a hacksaw but not as efficient. I used a fairly cheap box cutter so you should be able to get better res...
By: Von Malegowski

Continue Reading »]]>
Tue, 21 Oct 2014 13:24:05 PDT
The Ultimate Hammer (Hammer + Screwdriver, Bottle Opener, Nail Holder, and Ruler) http://www.instructables.com/id/The-Ultimate-Hammer-Hammer-Screwdriver-Bottle-Open/
The Ultimate Hammer (Hammer + Screwdriver, Bottle Opener, Nail Holder, and Ruler) - More DIY How To Projects]]> https://cdn.instructables.com/FY4/M0GH/HZ9O3KD0/FY4M0GHHZ9O3KD0.SQUARE2.jpg https://cdn.instructables.com/FY4/M0GH/HZ9O3KD0/FY4M0GHHZ9O3KD0.SQUARE.jpg https://cdn.instructables.com/FY4/M0GH/HZ9O3KD0/FY4M0GHHZ9O3KD0.SMALL.jpg M3G I recently stumbled upon this instructable, and it got me thinking; what else could be done to improve the humble hammer? I had some ideas in the back of my mind, and when I saw the Hand Tools Only Contest I decided to stop procrastinating and get to work. After all, what better entry for a contest ...
By: M3G

Continue Reading »]]>
Mon, 25 Aug 2014 08:24:06 PDT