Instructables: exploring - workshop - woodworking - box - featured http://www.instructables.com Mon, 8 Feb 2016 17:34:13 PST BLOX v1.01 Tetris Puzzle Box http://www.instructables.com/id/Tetris-Puzzle-Box/
Tetris Puzzle Box - More DIY How To Projects]]> http://cdn.instructables.com/FEF/L3L8/IKBHVN6K/FEFL3L8IKBHVN6K.SQUARE2.jpg http://cdn.instructables.com/FEF/L3L8/IKBHVN6K/FEFL3L8IKBHVN6K.SQUARE.jpg http://cdn.instructables.com/FEF/L3L8/IKBHVN6K/FEFL3L8IKBHVN6K.SMALL.jpg mfwoodshop https://www.mfwoodshop.com/2015/11/tetris-box/This easy to look at project, turned in to a 5 hour head ache. I had this little idea to make this box and though it would go quick and easy, I even had a plan drawn out. Well the fist two pieces wasn’t bad, then more part got added. Problems just compou...
By: mfwoodshop

Continue Reading »]]>
Sun, 7 Feb 2016 07:55:08 PST
Locking Box With 2 Drawers http://www.instructables.com/id/Locking-Box-With-2-Drawers/
Locking Box With 2 Drawers - More DIY How To Projects]]> http://cdn.instructables.com/FJB/4JNB/IK7BYNQD/FJB4JNBIK7BYNQD.SQUARE2.jpg http://cdn.instructables.com/FJB/4JNB/IK7BYNQD/FJB4JNBIK7BYNQD.SQUARE.jpg http://cdn.instructables.com/FJB/4JNB/IK7BYNQD/FJB4JNBIK7BYNQD.SMALL.jpg kevincarruthers I like the idea of a box with secret locks, so I thought I would try a different type of lock on this one. I used This box is pretty big. I used approx 2'x4' of 3/8" plywood, 38" of 1x2 pine, 35" of 1x2 pine ripped to make 1/2x2, 2" of 1" dowel, 8" of 3/8" dowel, 1" of 1/4" dowel Cut Parts, D...
By: kevincarruthers

Continue Reading »]]>
Sat, 6 Feb 2016 11:09:02 PST
Tobacco (or Anything Else) Wood Box http://www.instructables.com/id/Tobacco-or-Anything-Else-Wood-Box/
Tobacco (or Anything Else) Wood Box - More DIY How To Projects]]> http://cdn.instructables.com/FMN/E6KI/IK2X570J/FMNE6KIIK2X570J.SQUARE2.jpg http://cdn.instructables.com/FMN/E6KI/IK2X570J/FMNE6KIIK2X570J.SQUARE.jpg http://cdn.instructables.com/FMN/E6KI/IK2X570J/FMNE6KIIK2X570J.SMALL.jpg deluges Hey everyone,Here is a quick (one day) project I made on a sunday. It's my fist box and I wanted to make it quite nice. I think it'll be used for pipe tobacco if it keeps the humidity well enough (which it probably won't) but could be used for anything else. As per usual, no measurements because I'm...
By: deluges

Continue Reading »]]>
Sun, 31 Jan 2016 15:03:08 PST
Pallet CUP Lamp http://www.instructables.com/id/Pallet-CUP-Lamp/
Pallet CUP Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FF0/D4IT/IK1HR16I/FF0D4ITIK1HR16I.SQUARE2.jpg http://cdn.instructables.com/FF0/D4IT/IK1HR16I/FF0D4ITIK1HR16I.SQUARE.jpg http://cdn.instructables.com/FF0/D4IT/IK1HR16I/FF0D4ITIK1HR16I.SMALL.jpg OS11 A simple wood box with cups and bulbs. Pretty awesome The Box I found this wooden frame so I just cut them and sand them to make this 5 faces boxes. Stain I used this stain called CAOBILLA, or wengue or dark chocolate (this is how the client want it) Cups I have a dremel so I took a diam...
By: OS11

Continue Reading »]]>
Sun, 31 Jan 2016 05:49:15 PST
How to Build a Portable Toolbox for Travel http://www.instructables.com/id/How-to-Build-a-Portable-Toolbox-for-Travel/
How to Build a Portable Toolbox for Travel - More DIY How To Projects]]> http://cdn.instructables.com/FAT/Z1N7/IJUCSRYJ/FATZ1N7IJUCSRYJ.SQUARE2.jpg http://cdn.instructables.com/FAT/Z1N7/IJUCSRYJ/FATZ1N7IJUCSRYJ.SQUARE.jpg http://cdn.instructables.com/FAT/Z1N7/IJUCSRYJ/FATZ1N7IJUCSRYJ.SMALL.jpg darbinorvar This box is made out of maple with walnut splines and it has a walnut tray insert. Originally I designed it for art supplies, but as I started to work on it, I thought it would be just perfect as a travel box for hand tools. That's not to say however that it wouldn't be a great box to hold any suppl...
By: darbinorvar

Continue Reading »]]>
Tue, 26 Jan 2016 10:54:55 PST
Shut the Box Game TA http://www.instructables.com/id/Shut-the-Box-Game-TA/
Shut the Box Game TA - More DIY How To Projects]]> http://cdn.instructables.com/F81/AIXF/IJUCRNUO/F81AIXFIJUCRNUO.SQUARE2.jpg http://cdn.instructables.com/F81/AIXF/IJUCRNUO/F81AIXFIJUCRNUO.SQUARE.jpg http://cdn.instructables.com/F81/AIXF/IJUCRNUO/F81AIXFIJUCRNUO.SMALL.jpg RAMiddle Today I will be showing you how to create a fun, mathematical game that can be played by the whole family. Go Shopping Materials1/2x48 pinewood with rabbit joint15/16x 2 1/2 pinewood 3/4x9 pinewood9 1/2 by 9 1/2 Luan boardDecorative Foam lettersGorilla wood glue and elmers glue#6 washers1/8 dial ...
By: RAMiddle

Continue Reading »]]>
Tue, 26 Jan 2016 07:28:12 PST
How to Make a Sliding Tray Box With Hidden Compartment http://www.instructables.com/id/How-to-Make-a-Sliding-Tray-Box-With-Hidden-Compart/
How to Make a Sliding Tray Box With Hidden Compartment - More DIY How To Projects]]> http://cdn.instructables.com/FSL/U9CQ/IJUAGVFE/FSLU9CQIJUAGVFE.SQUARE2.jpg http://cdn.instructables.com/FSL/U9CQ/IJUAGVFE/FSLU9CQIJUAGVFE.SQUARE.jpg http://cdn.instructables.com/FSL/U9CQ/IJUAGVFE/FSLU9CQIJUAGVFE.SMALL.jpg Drunken Woodworker This box has mitered corner joinery that can easily be made on the tablesaw and reinforced with splines. The inside has a top sliding tray that moves to reveal a lower tray. When all the trays are lifted out, a secret hidden compartment is revealed to hide your valuables. All these trays are lined w...
By: Drunken Woodworker

Continue Reading »]]>
Tue, 26 Jan 2016 06:01:00 PST
Secret Compartment Box II http://www.instructables.com/id/Secret-Compartment-Box-II/
Secret Compartment Box II - More DIY How To Projects]]> http://cdn.instructables.com/FBJ/2R1K/IJG4AEZ9/FBJ2R1KIJG4AEZ9.SQUARE2.jpg http://cdn.instructables.com/FBJ/2R1K/IJG4AEZ9/FBJ2R1KIJG4AEZ9.SQUARE.jpg http://cdn.instructables.com/FBJ/2R1K/IJG4AEZ9/FBJ2R1KIJG4AEZ9.SMALL.jpg dhpenner1 I wanted to see if it was possible to build a box like this, with all its tight clearances, using mostly 2x4 material.I'm happy to say, while difficult, it can be done. The outside of the box are made from run of the mill 2x4's, the bottom/false bottom are 1/4" baltic birch plywood, the compartment ...
By: dhpenner1

Continue Reading »]]>
Sat, 16 Jan 2016 10:32:30 PST
Art supply box http://www.instructables.com/id/Art-Supply-Box/
Art supply box - More DIY How To Projects]]> http://cdn.instructables.com/F28/OU9G/IIM1UU3F/F28OU9GIIM1UU3F.SQUARE2.jpg http://cdn.instructables.com/F28/OU9G/IIM1UU3F/F28OU9GIIM1UU3F.SQUARE.jpg http://cdn.instructables.com/F28/OU9G/IIM1UU3F/F28OU9GIIM1UU3F.SMALL.jpg kevincarruthers My wife recently got an adult colouring book (lots of fine detail, not the dirty mind type) so I wanted to make her a nice box materials and tools You will need a 24"×48" sheet of 1/4" plywood, I used birch some scrap 1x4 and edging. The tools I used were my trusty band saw and drill press maki...
By: kevincarruthers

Continue Reading »]]>
Fri, 25 Dec 2015 19:34:13 PST
Wooden 6 Wheel Combination Lock Box http://www.instructables.com/id/Wooden-6-Wheel-Combination-Lock-Box/
Wooden 6 Wheel Combination Lock Box - More DIY How To Projects]]> http://cdn.instructables.com/FR0/HHC9/IIM1UTIA/FR0HHC9IIM1UTIA.SQUARE2.jpg http://cdn.instructables.com/FR0/HHC9/IIM1UTIA/FR0HHC9IIM1UTIA.SQUARE.jpg http://cdn.instructables.com/FR0/HHC9/IIM1UTIA/FR0HHC9IIM1UTIA.SMALL.jpg kevincarruthers a wooden box with a 6 wheel combination lock you will need I used approx. 6' Sq 1/2"plywood, 2'- 1x2, and assorted dowel making the rings I started by cutting 6 squares 10 1/2" square finding Centre and drilling a 5/64" hole. I make a simple circle jig for my band saw drilled a1/16" hole and...
By: kevincarruthers

Continue Reading »]]>
Fri, 25 Dec 2015 19:17:05 PST
Wood Box Bandsaw Style http://www.instructables.com/id/Wood-Box-Bandsaw-Style/
Wood Box Bandsaw Style - More DIY How To Projects]]> http://cdn.instructables.com/FFR/L2GS/II6BZYMV/FFRL2GSII6BZYMV.SQUARE2.jpg http://cdn.instructables.com/FFR/L2GS/II6BZYMV/FFRL2GSII6BZYMV.SQUARE.jpg http://cdn.instructables.com/FFR/L2GS/II6BZYMV/FFRL2GSII6BZYMV.SMALL.jpg torx My latest creation is placed in wooden boxes strand performed with the band saw. In particular I was inspired by what we've seen on the net and that is under the name "wood bandsaw box chicago style" from which the site is major source of original ideas Pinterest.Being the first time that I was buil...
By: torx

Continue Reading »]]>
Mon, 14 Dec 2015 16:07:34 PST
Bandsaw Box with Lid http://www.instructables.com/id/Bandsaw-Box-With-Lid/
Bandsaw Box with Lid - More DIY How To Projects]]> http://cdn.instructables.com/FVM/K0SQ/II3JCCPL/FVMK0SQII3JCCPL.SQUARE2.jpg http://cdn.instructables.com/FVM/K0SQ/II3JCCPL/FVMK0SQII3JCCPL.SQUARE.jpg http://cdn.instructables.com/FVM/K0SQ/II3JCCPL/FVMK0SQII3JCCPL.SMALL.jpg lanleo I'm home sick and stuck on the couch, so I thought I would share an easy project I do with my students. I think this is a nice introduction to bandsaw boxes, and a good project that requires only basic tool knowledge and techniques. I have mixed classes of 7th and 8th grade students. Some have never...
By: lanleo

Continue Reading »]]>
Sun, 13 Dec 2015 09:28:25 PST
2x4 Enchanted Treasure Box http://www.instructables.com/id/2x4-Enchanted-Treasure-Box/
2x4 Enchanted Treasure Box - More DIY How To Projects]]> http://cdn.instructables.com/FKZ/TBPL/II4WKWWH/FKZTBPLII4WKWWH.SQUARE2.jpg http://cdn.instructables.com/FKZ/TBPL/II4WKWWH/FKZTBPLII4WKWWH.SQUARE.jpg http://cdn.instructables.com/FKZ/TBPL/II4WKWWH/FKZTBPLII4WKWWH.SMALL.jpg MissionSRX Well now you've done it. It's almost Christmas and you forgot "someone's" gift. Before your hang your head in shame, refuse to accept defeat. Take a walk to the garage. Can you find:-a 2x4-an inch of 1/4" dowel-a square bit of 1/4" plywood...Seriously, $3 worth of leftovers and a little determinatio...
By: MissionSRX

Continue Reading »]]>
Sun, 13 Dec 2015 17:03:59 PST
How to Make a Puzzle Box. "Hell Box" http://www.instructables.com/id/How-to-Make-a-Puzzle-Box-Hell-Box/
How to Make a Puzzle Box. "Hell Box" - More DIY How To Projects]]> http://cdn.instructables.com/FST/FW0R/II3H4WU0/FSTFW0RII3H4WU0.SQUARE2.jpg http://cdn.instructables.com/FST/FW0R/II3H4WU0/FSTFW0RII3H4WU0.SQUARE.jpg http://cdn.instructables.com/FST/FW0R/II3H4WU0/FSTFW0RII3H4WU0.SMALL.jpg Nunwithgun My wife had to have surgery and would be in the hospital for 4 days. I needed to get her a gift. But she would have to work for it. So I created a puzzle box, or I prefer "Hell Box" because its hell getting into. My idea was that I could give her a box with a lock on it, but the only way to unlock t...
By: Nunwithgun

Continue Reading »]]>
Sun, 13 Dec 2015 00:03:02 PST
Band Saw Box with a Secret Drawer and swinging bracelet bars http://www.instructables.com/id/Band-Saw-Box-With-a-Secret-Door-and-Swinging-Brace/
Band Saw Box with a Secret Drawer and swinging bracelet bars - More DIY How To Projects]]> http://cdn.instructables.com/F03/X5ZS/IHZ4RR0Q/F03X5ZSIHZ4RR0Q.SQUARE2.jpg http://cdn.instructables.com/F03/X5ZS/IHZ4RR0Q/F03X5ZSIHZ4RR0Q.SQUARE.jpg http://cdn.instructables.com/F03/X5ZS/IHZ4RR0Q/F03X5ZSIHZ4RR0Q.SMALL.jpg kevincarruthers This is my first attempt at a band saw box and I haven't really used a band saw much in 30 years. I made this as an Xmas gift for my daughter and thought the secret drawer was a nice touch creating a design You will need a band saw, drill press or router and round-over bit, belt sander and sand...
By: kevincarruthers

Continue Reading »]]>
Thu, 10 Dec 2015 09:19:40 PST
Evil Dead Scary LED Lamp Build with Gearbox Designs http://www.instructables.com/id/Evil-Dead-Scary-LED-Lamp-Build-With-Gearbox-Design/
Evil Dead Scary LED Lamp Build with Gearbox Designs - More DIY How To Projects]]> http://cdn.instructables.com/FLW/WXIV/IHZ8Y8Q0/FLWWXIVIHZ8Y8Q0.SQUARE2.jpg http://cdn.instructables.com/FLW/WXIV/IHZ8Y8Q0/FLWWXIVIHZ8Y8Q0.SQUARE.jpg http://cdn.instructables.com/FLW/WXIV/IHZ8Y8Q0/FLWWXIVIHZ8Y8Q0.SMALL.jpg gearboxdesigns In this Instructable, I will show you how I made this rad LED lightbox featuring my favorite character from my favorite movie: Henrietta from Evil Dead 2. If you are on a mobile device and would like to see the video, here's an alternate link.Its a pretty straight forward build. The tools I used are...
By: gearboxdesigns

Continue Reading »]]>
Wed, 9 Dec 2015 07:17:26 PST
Making Vintage Style Storage Boxes w/ Splines http://www.instructables.com/id/Making-Vintage-Style-Storage-Boxes-w-Splines/
Making Vintage Style Storage Boxes w/ Splines - More DIY How To Projects]]> http://cdn.instructables.com/FWH/TXMV/IHVVPK9L/FWHTXMVIHVVPK9L.SQUARE2.jpg http://cdn.instructables.com/FWH/TXMV/IHVVPK9L/FWHTXMVIHVVPK9L.SQUARE.jpg http://cdn.instructables.com/FWH/TXMV/IHVVPK9L/FWHTXMVIHVVPK9L.SMALL.jpg darbinorvar I wanted to build a couple of really nice looking boxes that I could use for organizing and storing some art supplies. For the boxes I decided to use cedar wood, as well as maple for splices. I also used some card holders and they turned out just great. Let's see how I built them. Cutting the Wood...
By: darbinorvar

Continue Reading »]]>
Mon, 7 Dec 2015 09:58:25 PST
Make a box and bracelet to your dearest Star http://www.instructables.com/id/Make-a-box-and-bracelet-to-your-dearest-Star/
Make a box and bracelet to your dearest Star - More DIY How To Projects]]> http://cdn.instructables.com/F38/1O4R/IHS3QSGS/F381O4RIHS3QSGS.SQUARE2.jpg http://cdn.instructables.com/F38/1O4R/IHS3QSGS/F381O4RIHS3QSGS.SQUARE.jpg http://cdn.instructables.com/F38/1O4R/IHS3QSGS/F381O4RIHS3QSGS.SMALL.jpg Amaries Christmas time is coming and I like to give away homemade gifts. This year it will be a bracelet in a carved box with a special message. I wanted to play with words and stars. On the lid of the box I carved: "You are the star in my life". On one side: "All that I want" and on the other side: "Starti...
By: Amaries

Continue Reading »]]>
Fri, 4 Dec 2015 14:55:48 PST
Beautiful Wood Toy Box http://www.instructables.com/id/Beautiful-Wood-Toy-Box/
Beautiful Wood Toy Box - More DIY How To Projects]]> http://cdn.instructables.com/FEP/WCG2/IHQM657C/FEPWCG2IHQM657C.SQUARE2.jpg http://cdn.instructables.com/FEP/WCG2/IHQM657C/FEPWCG2IHQM657C.SQUARE.jpg http://cdn.instructables.com/FEP/WCG2/IHQM657C/FEPWCG2IHQM657C.SMALL.jpg Corasaurus Rex Beautiful Wood Toy BoxFor my nephew Nathan's 1st birthday my Fiance and I decided to make him something special, something that he could climb all over as he grows and use for years to come.We decided we would make an elegant looking Hand Crafted Toy Box for him that was not only functional as a sto...
By: Corasaurus Rex

Continue Reading »]]>
Thu, 3 Dec 2015 13:25:50 PST
Wooden Christmas Cracker http://www.instructables.com/id/Wooden-Christmas-Cracker/
Wooden Christmas Cracker - More DIY How To Projects]]> http://cdn.instructables.com/FLO/RCJL/IHNP55XS/FLORCJLIHNP55XS.SQUARE2.jpg http://cdn.instructables.com/FLO/RCJL/IHNP55XS/FLORCJLIHNP55XS.SQUARE.jpg http://cdn.instructables.com/FLO/RCJL/IHNP55XS/FLORCJLIHNP55XS.SMALL.jpg world of woodcraft The concept of a Christmas cracker might not be universal but its pretty fun. The basics are that each person gets a cracker... which is traditionally a big sweet shaped present which is broken into by pulling between two people. This provides fun and merriment in the form of a paper hat, a terrible...
By: world of woodcraft

Continue Reading »]]>
Tue, 1 Dec 2015 14:00:37 PST
Split live edge cedar and pine box ((mostly)no power tools) http://www.instructables.com/id/Split-live-edge-cedar-and-pine-box-mostlyno-power-/
Split live edge cedar and pine box ((mostly)no power tools) - More DIY How To Projects]]> http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SQUARE2.jpg http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SQUARE.jpg http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SMALL.jpg oleishman this is a concept i made along time ago with the split sides but i never completed it. this week i dug up the one side i had made and a handful of garden stakes to bring this old idea back from the spare parts bin. this build used approximately 20cm 2x4 40cm cedar garden stake 1 cool drift wood and ...
By: oleishman

Continue Reading »]]>
Thu, 12 Nov 2015 01:54:06 PST
Laser cut Finger Joint Valet box with tray http://www.instructables.com/id/Laser-cut-Finger-Joint-Valet-box-with-tray/
Laser cut Finger Joint Valet box with tray - More DIY How To Projects]]> http://cdn.instructables.com/FJO/N55T/I4LKIWPK/FJON55TI4LKIWPK.SQUARE2.jpg http://cdn.instructables.com/FJO/N55T/I4LKIWPK/FJON55TI4LKIWPK.SQUARE.jpg http://cdn.instructables.com/FJO/N55T/I4LKIWPK/FJON55TI4LKIWPK.SMALL.jpg TimothyS Thanksgiving was a great time this year. I got to spend many hours with my Brother-in-law, who seemed to misplace his keys and wallet at least seven times a day. After dinner, we drew names for Christmas presents; lo and behold, I got him. What better way to help than giving him the gift of organ...
By: TimothyS

Continue Reading »]]>
Tue, 6 Jan 2015 18:39:50 PST
How To Make Segmented Boxes on the Band Saw http://www.instructables.com/id/How-To-Make-Segmented-Boxes-on-the-Band-Saw/
How To Make Segmented Boxes on the Band Saw - More DIY How To Projects]]> http://cdn.instructables.com/FUW/Q1GT/IG9MO8XD/FUWQ1GTIG9MO8XD.SQUARE2.jpg http://cdn.instructables.com/FUW/Q1GT/IG9MO8XD/FUWQ1GTIG9MO8XD.SQUARE.jpg http://cdn.instructables.com/FUW/Q1GT/IG9MO8XD/FUWQ1GTIG9MO8XD.SMALL.jpg darbinorvar I wanted to try something new and decided to make some segmented boxes, but not on the lathe, no on the band saw. It's a simple technique, and you get a lot of boxes out of your material. These boxes were pretty simple to make, and came out absolutely gorgeous! Let's go over how I made them! Milli...
By: darbinorvar

Continue Reading »]]>
Wed, 28 Oct 2015 09:23:50 PDT
Video Game/Movie Disk Case Box http://www.instructables.com/id/Video-GameMovie-Disk-Case-Box/
Video Game/Movie Disk Case Box - More DIY How To Projects]]> http://cdn.instructables.com/FBG/HGSQ/IG5EESKT/FBGHGSQIG5EESKT.SQUARE2.jpg http://cdn.instructables.com/FBG/HGSQ/IG5EESKT/FBGHGSQIG5EESKT.SQUARE.jpg http://cdn.instructables.com/FBG/HGSQ/IG5EESKT/FBGHGSQIG5EESKT.SMALL.jpg ozzie2200 A step-by-step DIY of making a Video Game/Movie Disk Case Box. Materials/Tools Needed Tools 600mm Ruler Tenon Saw Flat Fine Grain File Flat Large Grain File Tri Square Scroll Saw 120 Grain Sandpaper Pencil Band Saw GlueMaterials 90x19x1200 Pine 400x300 Ply Cut Plank in Two Use the band saw to...
By: ozzie2200

Continue Reading »]]>
Sat, 24 Oct 2015 18:04:13 PDT
Grateful Dead woodburned box http://www.instructables.com/id/Grateful-Dead-woodburned-box/
Grateful Dead woodburned box - More DIY How To Projects]]> http://cdn.instructables.com/FEF/SG5L/IFSJG5N9/FEFSG5LIFSJG5N9.SQUARE2.jpg http://cdn.instructables.com/FEF/SG5L/IFSJG5N9/FEFSG5LIFSJG5N9.SQUARE.jpg http://cdn.instructables.com/FEF/SG5L/IFSJG5N9/FEFSG5LIFSJG5N9.SMALL.jpg jessyratfink My second woodburning adventure! This woodburning was a little more complicated than my first try but I'm still enjoying it. This one was a request from a friend - I confess I know very little to nothing about the Grateful Dead. :DI've attached my "pattern" to the next step, and I've linked to the b...
By: jessyratfink

Continue Reading »]]>
Thu, 15 Oct 2015 14:54:46 PDT
custom wooden ring box http://www.instructables.com/id/custom-wooden-ring-box/
custom wooden ring box - More DIY How To Projects]]> http://cdn.instructables.com/F44/VZ09/IFO6ZJ2I/F44VZ09IFO6ZJ2I.SQUARE2.jpg http://cdn.instructables.com/F44/VZ09/IFO6ZJ2I/F44VZ09IFO6ZJ2I.SQUARE.jpg http://cdn.instructables.com/F44/VZ09/IFO6ZJ2I/F44VZ09IFO6ZJ2I.SMALL.jpg jrobie custom ring box made from fallen birch tree gather supplies, prep wood supplies needed:-hand saw-fallen tree (1 1/2" - 2" diameter)-paint brush-wood stain-polyurethane -small hinge-old ring box-sand paper-small wood chiselsdirections:prep tree by cutting desired length and cut off top third for c...
By: jrobie

Continue Reading »]]>
Mon, 12 Oct 2015 15:08:58 PDT
Train Shelf http://www.instructables.com/id/Train-Shelf/
Train Shelf - More DIY How To Projects]]> http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SQUARE2.jpg http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SQUARE.jpg http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SMALL.jpg HUKBMBEAR When I designed the Bi-Plane shelf (see instructable at: http://www.instructables.com/id/Biplane-shelf/ )One of my designs was for a Train shelf, so after making the plane I decided to also have a go at the train, and I think it turned out quite well. I also wanted to do something for the Back To th...
By: HUKBMBEAR

Continue Reading »]]>
Sat, 10 Oct 2015 11:14:48 PDT
Phi Box http://www.instructables.com/id/Phi-Box/
Phi Box - More DIY How To Projects]]> http://cdn.instructables.com/FTH/A6FS/IERC6DLE/FTHA6FSIERC6DLE.SQUARE2.jpg http://cdn.instructables.com/FTH/A6FS/IERC6DLE/FTHA6FSIERC6DLE.SQUARE.jpg http://cdn.instructables.com/FTH/A6FS/IERC6DLE/FTHA6FSIERC6DLE.SMALL.jpg HTMF Metal Pizza The attached file is a scalable vector graphic made from Corel Draw.I made this to be cut on the UNIVERSAL 60 Watt CO2 Lasers in the Chandler, Az TECHSHOP.This is a laser cut pattern that assembles into a box with a wooden hinge. Its about (approximately, almost, nearly) the size of a cigar box with...
By: HTMF Metal Pizza

Continue Reading »]]>
Sat, 19 Sep 2015 19:06:14 PDT
Sliding ring box http://www.instructables.com/id/Sliding-ring-box/
Sliding ring box - More DIY How To Projects]]> http://cdn.instructables.com/F9K/S9VI/IE4ZUIR7/F9KS9VIIE4ZUIR7.SQUARE2.jpg http://cdn.instructables.com/F9K/S9VI/IE4ZUIR7/F9KS9VIIE4ZUIR7.SQUARE.jpg http://cdn.instructables.com/F9K/S9VI/IE4ZUIR7/F9KS9VIIE4ZUIR7.SMALL.jpg petachock My last ring box I made I posted on Instructables and I got a lot of views and likes (ring box), also someone saw the wooden hinge I'd used and decided to put it on an engagement ring box he was making so when I decided to make another one I thought I'd put it on here too and hopefully it too could ...
By: petachock

Continue Reading »]]>
Fri, 4 Sep 2015 09:10:32 PDT
"Flaming" Bandsaw Box http://www.instructables.com/id/Flaming-Bandsaw-Box/
"Flaming" Bandsaw Box - More DIY How To Projects]]> http://cdn.instructables.com/F66/4F5A/IE17ZJ2R/F664F5AIE17ZJ2R.SQUARE2.jpg http://cdn.instructables.com/F66/4F5A/IE17ZJ2R/F664F5AIE17ZJ2R.SQUARE.jpg http://cdn.instructables.com/F66/4F5A/IE17ZJ2R/F664F5AIE17ZJ2R.SMALL.jpg isaylor In this instructable, I will show you how to make a "flaming" bandsaw box. I am making this box for my dad. The reason I chose a flame is that he is a firefighter. WARNING, if you don't like sanding small cracks and crevices, do not make this box.Tools Needed:BandsawBelt/disc sanderDrill and drum sa...
By: isaylor

Continue Reading »]]>
Tue, 1 Sep 2015 17:34:12 PDT
"Broken" Bandsaw Box http://www.instructables.com/id/Bandsaw-Box-1/
"Broken" Bandsaw Box - More DIY How To Projects]]> http://cdn.instructables.com/F3A/YEOP/IDLZYV7Z/F3AYEOPIDLZYV7Z.SQUARE2.jpg http://cdn.instructables.com/F3A/YEOP/IDLZYV7Z/F3AYEOPIDLZYV7Z.SQUARE.jpg http://cdn.instructables.com/F3A/YEOP/IDLZYV7Z/F3AYEOPIDLZYV7Z.SMALL.jpg isaylor In this instructable I will show you how to make a bandsaw box. A bandsaw box is an ornate jewelry or trinket box made mostly on a bandsaw. They are fun to make and don't take many materials.Tools Needed:Bandsaw (with a rip fence)Belt Sander Drill press with a drum sander Materials Needed:woodFelt ...
By: isaylor

Continue Reading »]]>
Fri, 21 Aug 2015 12:28:59 PDT
Mars Attacks Martian Saucer Candy Dish http://www.instructables.com/id/Mars-Attacks-Martian-Saucer-Candy-Dish/
Mars Attacks Martian Saucer Candy Dish - More DIY How To Projects]]> http://cdn.instructables.com/F10/P7CE/ICRXTUKN/F10P7CEICRXTUKN.SQUARE2.jpg http://cdn.instructables.com/F10/P7CE/ICRXTUKN/F10P7CEICRXTUKN.SQUARE.jpg http://cdn.instructables.com/F10/P7CE/ICRXTUKN/F10P7CEICRXTUKN.SMALL.jpg antagonizer Let me start by saying that, as a fan of sci-fi movies, none is more iconic than the classic, 'Mars Attacks'. There are so many props for die hard enthusiasts to recreate, but none is more beautifully designed than the Martian saucer. Based on the 50's 'B' movie model, it is both simple, and elegan...
By: antagonizer

Continue Reading »]]>
Sun, 2 Aug 2015 20:23:32 PDT
Wood box http://www.instructables.com/id/Wood-box-1/
Wood box - More DIY How To Projects]]> http://cdn.instructables.com/F5O/OH3P/ICE1WEVQ/F5OOH3PICE1WEVQ.SQUARE2.jpg http://cdn.instructables.com/F5O/OH3P/ICE1WEVQ/F5OOH3PICE1WEVQ.SQUARE.jpg http://cdn.instructables.com/F5O/OH3P/ICE1WEVQ/F5OOH3PICE1WEVQ.SMALL.jpg yehong Make a wood box Preparation Select a suitable wood for box, I used walnut wood. Remove the wood for box Use proper tool to remove wood. Make the box cover Use proper tools to make the box cover Clean and make detail Use sand paper to process the box surface.
By: yehong

Continue Reading »]]>
Mon, 20 Jul 2015 07:59:33 PDT
Cedar Planter Box http://www.instructables.com/id/Cedar-Planter-Box/
Cedar Planter Box - More DIY How To Projects]]> http://cdn.instructables.com/F4T/3TPZ/IC8X2I38/F4T3TPZIC8X2I38.SQUARE2.jpg http://cdn.instructables.com/F4T/3TPZ/IC8X2I38/F4T3TPZIC8X2I38.SQUARE.jpg http://cdn.instructables.com/F4T/3TPZ/IC8X2I38/F4T3TPZIC8X2I38.SMALL.jpg LaneBrosWoodShop I always enjoy building outdoor projects anyways. I wanted to build something a little different from the usual planter boxes and decided that a sort of Greene and Greene style would be cool.This is really a simple project to build especially if you have a Kreg Jig. I started out with 4 1x4x8 cedar ...
By: LaneBrosWoodShop

Continue Reading »]]>
Sat, 18 Jul 2015 10:55:25 PDT
How To Make Apple Boxes http://www.instructables.com/id/How-To-Make-Apple-Boxes/
How To Make Apple Boxes - More DIY How To Projects]]> http://cdn.instructables.com/F3Z/U71K/IB7BBA7O/F3ZU71KIB7BBA7O.SQUARE2.jpg http://cdn.instructables.com/F3Z/U71K/IB7BBA7O/F3ZU71KIB7BBA7O.SQUARE.jpg http://cdn.instructables.com/F3Z/U71K/IB7BBA7O/F3ZU71KIB7BBA7O.SMALL.jpg nick ferry Apple boxes get tons of use in all sorts of fields relating to camera work. These are great for having talent sit on, stand on, setting props on or secure lighting fixtures or tri-pods. They also work really well around the home workshop for a place to sit or as a nice little step stool! My photo...
By: nick ferry

Continue Reading »]]>
Sun, 21 Jun 2015 22:41:38 PDT
Log card box http://www.instructables.com/id/Log-card-box/
Log card box - More DIY How To Projects]]> http://cdn.instructables.com/FM2/M6HD/IB21YDKW/FM2M6HDIB21YDKW.SQUARE2.jpg http://cdn.instructables.com/FM2/M6HD/IB21YDKW/FM2M6HDIB21YDKW.SQUARE.jpg http://cdn.instructables.com/FM2/M6HD/IB21YDKW/FM2M6HDIB21YDKW.SMALL.jpg mikeasaurus Collect all the cards for your birthday, wedding, or other event in a rustic card box that's made from an old section of log. This card box is made from real wood, and is sure to capture the imagination of your guests. The log section was trimmed up and hollowed on a bandsaw. A swivel lid allows acc...
By: mikeasaurus

Continue Reading »]]>
Thu, 18 Jun 2015 12:41:18 PDT
Bandsaw Box- Whale http://www.instructables.com/id/Bandsaw-Box-Whale/
Bandsaw Box- Whale - More DIY How To Projects]]> http://cdn.instructables.com/FXC/RBCO/I9UDDJY7/FXCRBCOI9UDDJY7.SQUARE2.jpg http://cdn.instructables.com/FXC/RBCO/I9UDDJY7/FXCRBCOI9UDDJY7.SQUARE.jpg http://cdn.instructables.com/FXC/RBCO/I9UDDJY7/FXCRBCOI9UDDJY7.SMALL.jpg HaroldPenner How to make your very own Bandsaw box Whale. Thanks to Angeli Frondoso who made this in our Woodworking class. (:Thanks Angie for the instructable directions! Whale Pattern Length- 25cm (10")Width- 8.5cm (3 3/8")Height- 8.5cm (3 3/8") Draw top and side view of the whale This pattern can easily...
By: HaroldPenner

Continue Reading »]]>
Mon, 18 May 2015 18:23:48 PDT
Small Van Modifications http://www.instructables.com/id/Small-Van-Modifications/
Small Van Modifications - More DIY How To Projects]]> http://cdn.instructables.com/FFP/IUH5/I9PGU48Y/FFPIUH5I9PGU48Y.SQUARE2.jpg http://cdn.instructables.com/FFP/IUH5/I9PGU48Y/FFPIUH5I9PGU48Y.SQUARE.jpg http://cdn.instructables.com/FFP/IUH5/I9PGU48Y/FFPIUH5I9PGU48Y.SMALL.jpg Bill Rose Ok so I have a small van. A Citreon Berlingo its a common size of van and has a lot of space inside. However a lot of that space is wasted. Its just a lot of air being driven around and the loading area is limited. But if you build a parcel / crate shelf then the van becomes much more user friendly....
By: Bill Rose

Continue Reading »]]>
Fri, 15 May 2015 04:25:04 PDT
Custom Project Enclosure http://www.instructables.com/id/Custom-Project-Enclosure/
Custom Project Enclosure - More DIY How To Projects]]> http://cdn.instructables.com/FFH/I532/I760NLR2/FFHI532I760NLR2.SQUARE2.jpg http://cdn.instructables.com/FFH/I532/I760NLR2/FFHI532I760NLR2.SQUARE.jpg http://cdn.instructables.com/FFH/I532/I760NLR2/FFHI532I760NLR2.SMALL.jpg DIY Hacks and How Tos So you have just finished building an awesome electronics project. Now you need to find a housing for it. You could just stick it in a plain plastic box. But project enclosures that you buy from a store are expensive and are rarely the right size. So why not build your own custom project enclosure. ...
By: DIY Hacks and How Tos

Continue Reading »]]>
Thu, 12 Mar 2015 04:37:09 PDT
CNC Hammer Joint Box http://www.instructables.com/id/CNC-Hammer-Joint-Box/
CNC Hammer Joint Box - More DIY How To Projects]]> http://cdn.instructables.com/FY2/T6IK/I6YY03V9/FY2T6IKI6YY03V9.SQUARE2.jpg http://cdn.instructables.com/FY2/T6IK/I6YY03V9/FY2T6IKI6YY03V9.SQUARE.jpg http://cdn.instructables.com/FY2/T6IK/I6YY03V9/FY2T6IKI6YY03V9.SMALL.jpg mydarndest I am building some skills with my Shapeoko 2 and decided to cut a box that uses joinery and assembles without glue. Using a joinery technique called “Hammer Tenon”, I did some studies to translate it for CNC and did test cuts to make sure I had my file match the tolerance of the machine. Then, I d...
By: mydarndest

Continue Reading »]]>
Mon, 9 Mar 2015 12:24:27 PDT
wine box into rustic wood box http://www.instructables.com/id/wine-box-into-rustic-wood-box/
wine box into rustic wood box - More DIY How To Projects]]> http://cdn.instructables.com/FKV/1789/I6DHZ4M3/FKV1789I6DHZ4M3.SQUARE2.jpg http://cdn.instructables.com/FKV/1789/I6DHZ4M3/FKV1789I6DHZ4M3.SQUARE.jpg http://cdn.instructables.com/FKV/1789/I6DHZ4M3/FKV1789I6DHZ4M3.SMALL.jpg briciius Hello everybody !Today i will teach you how to get an authentic, vintage and rustic wood box from a classical wine box.It's a project i've made during my studies a long time ago. so i've take new pics to show you the differents step. Preparing our magic potion. We need : A bottle - Vinaigre ( use...
By: briciius

Continue Reading »]]>
Fri, 20 Feb 2015 04:43:17 PST
Ring box with wooden hinge http://www.instructables.com/id/Ring-box-with-wooden-hinge/
Ring box with wooden hinge - More DIY How To Projects]]> http://cdn.instructables.com/FR6/F1U1/I4YTQFR8/FR6F1U1I4YTQFR8.SQUARE2.jpg http://cdn.instructables.com/FR6/F1U1/I4YTQFR8/FR6F1U1I4YTQFR8.SQUARE.jpg http://cdn.instructables.com/FR6/F1U1/I4YTQFR8/FR6F1U1I4YTQFR8.SMALL.jpg petachock I really like making wooden boxes and always use wooden hinges, I think they look so much better than any hinge you can buy. Plus they cost so much less (in money terms that is, not time!). As a lot of people who do woodwork I often have loads of offcuts that a generally too small to do anything wit...
By: petachock

Continue Reading »]]>
Fri, 16 Jan 2015 14:23:20 PST
Secret Compartment Box with Silver Inlay http://www.instructables.com/id/Secret-Compartment-Box-with-Silver-Inlay/
Secret Compartment Box with Silver Inlay - More DIY How To Projects]]> http://cdn.instructables.com/FB2/5MRC/I4VQ6AQM/FB25MRCI4VQ6AQM.SQUARE2.jpg http://cdn.instructables.com/FB2/5MRC/I4VQ6AQM/FB25MRCI4VQ6AQM.SQUARE.jpg http://cdn.instructables.com/FB2/5MRC/I4VQ6AQM/FB25MRCI4VQ6AQM.SMALL.jpg rybitski This box was constructed as a gift from cherry and walnut. The cherry was cut, dried, sawed, and planed in my hometown in Virginia then moved out west with me. The walnut was purchased locally in California. The only fasteners used in the construction of the box are the screws attaching the hinge, e...
By: rybitski

Continue Reading »]]>
Wed, 14 Jan 2015 17:12:01 PST
Wooden Apple iPad Protective Box http://www.instructables.com/id/Wooden-Apple-iPad-Protective-Box/
Wooden Apple iPad Protective Box - More DIY How To Projects]]> http://cdn.instructables.com/FKQ/DXZG/I4PHVJVO/FKQDXZGI4PHVJVO.SQUARE2.jpg http://cdn.instructables.com/FKQ/DXZG/I4PHVJVO/FKQDXZGI4PHVJVO.SQUARE.jpg http://cdn.instructables.com/FKQ/DXZG/I4PHVJVO/FKQDXZGI4PHVJVO.SMALL.jpg AverageJoesJoinery I made this wooden box/case to enable me to take my iPad with me when I go into hospital. It will offer a lot of protection if I did drop it because the iPad is secured with padded foam inside the wooden box. Just because it was designed to offer protection doesnt mean it shouldnt look nice, so I in...
By: AverageJoesJoinery

Continue Reading »]]>
Sun, 11 Jan 2015 08:41:04 PST
Laser Cut Wooden Jewelry Box http://www.instructables.com/id/Laser-Cut-Wooden-Jewelry-Box/
Laser Cut Wooden Jewelry Box - More DIY How To Projects]]> http://cdn.instructables.com/F8Q/Y8CG/I4CN467Q/F8QY8CGI4CN467Q.SQUARE2.jpg http://cdn.instructables.com/F8Q/Y8CG/I4CN467Q/F8QY8CGI4CN467Q.SQUARE.jpg http://cdn.instructables.com/F8Q/Y8CG/I4CN467Q/F8QY8CGI4CN467Q.SMALL.jpg Regax This Instructable will guide you through all of the steps required to make a fully customizable laser cut wooden jewelry box! This jewelry box contains two fold-out wings complete with satin foam pads, three racks designed to hold a total of twelve rings/necklaces and two fold-out panels designed to...
By: Regax

Continue Reading »]]>
Sat, 3 Jan 2015 00:12:16 PST
Hardwood watch box http://www.instructables.com/id/Hardwood-watch-box/
Hardwood watch box - More DIY How To Projects]]> http://cdn.instructables.com/F6D/6KK5/I3THV7DV/F6D6KK5I3THV7DV.SQUARE2.jpg http://cdn.instructables.com/F6D/6KK5/I3THV7DV/F6D6KK5I3THV7DV.SQUARE.jpg http://cdn.instructables.com/F6D/6KK5/I3THV7DV/F6D6KK5I3THV7DV.SMALL.jpg plkap74 I made this wooden box as a present for my brother over the holidays. The box is made of two pieces of Padauk hardwood (love the red color). Box pieces of wood have had pockets CNC milled into them to fit a 2 watches, and the top of the box has been CNC milled with a v-shaped bit to make his initial...
By: plkap74

Continue Reading »]]>
Mon, 22 Dec 2014 21:48:20 PST
Frozen Checker Board Box http://www.instructables.com/id/Frozen-Checker-Board-Box/
Frozen Checker Board Box - More DIY How To Projects]]> http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SQUARE2.jpg http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SQUARE.jpg http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SMALL.jpg sporty667 I wanted to build something for my cousins two little girls for Christmas and my dad said make checker board that's what I used to make for family and my mom said do something from frozen. These two little girls love frozen and were even them for Halloween so I started working, first time attempting...
By: sporty667

Continue Reading »]]>
Mon, 15 Dec 2014 16:54:20 PST
Secret Compartment Box http://www.instructables.com/id/Secret-Compartment-Box/
Secret Compartment Box - More DIY How To Projects]]> http://cdn.instructables.com/FWL/HRGY/I3GUJ7ZJ/FWLHRGYI3GUJ7ZJ.SQUARE2.jpg http://cdn.instructables.com/FWL/HRGY/I3GUJ7ZJ/FWLHRGYI3GUJ7ZJ.SQUARE.jpg http://cdn.instructables.com/FWL/HRGY/I3GUJ7ZJ/FWLHRGYI3GUJ7ZJ.SMALL.jpg dhpenner1 I've had this idea for a jewelry box with a secret compartment rolling around in my head for a few months. There are no metal mechanisms, all movement is caused by wooden springs activated by an unassuming key. Selecting Your Wood I used a Walnut for the sides and Curly Maple for the back, front...
By: dhpenner1

Continue Reading »]]>
Mon, 8 Dec 2014 21:51:51 PST
Make A Cordless Lightbox http://www.instructables.com/id/Make-A-Cordless-Lightbox/
Make A Cordless Lightbox - More DIY How To Projects]]> http://cdn.instructables.com/F57/GVQB/I2LM25V6/F57GVQBI2LM25V6.SQUARE2.jpg http://cdn.instructables.com/F57/GVQB/I2LM25V6/F57GVQBI2LM25V6.SQUARE.jpg http://cdn.instructables.com/F57/GVQB/I2LM25V6/F57GVQBI2LM25V6.SMALL.jpg imwilly Recently designed and constructed this light-box which requires no 'mains' power supply. Just insert a 9V DC battery.Have just finished my upload file and wanted to share.Now everyone can make their on light-boxes. Wanted to get it out there before someone tried making everyone pay for it.Cheapest A...
By: imwilly

Continue Reading »]]>
Mon, 17 Nov 2014 03:34:10 PST
dogwood burl and walnut freehand pick box http://www.instructables.com/id/dogwood-burl-and-walnut-freehand-pick-box/
dogwood burl and walnut freehand pick box - More DIY How To Projects]]> http://cdn.instructables.com/FZW/J4K1/I2F1ZDKL/FZWJ4K1I2F1ZDKL.SQUARE2.jpg http://cdn.instructables.com/FZW/J4K1/I2F1ZDKL/FZWJ4K1I2F1ZDKL.SQUARE.jpg http://cdn.instructables.com/FZW/J4K1/I2F1ZDKL/FZWJ4K1I2F1ZDKL.SMALL.jpg rickysp8 Well it said "In this Wood Contest, we want you to show us what magic you can create with a hunk of wood" so I did just that. A couple of years ago while wondering out in the woods I found a dog wood tree with a small burl near its base and since the tree was nearly dead I got my saw and cut the bur...
By: rickysp8

Continue Reading »]]>
Wed, 12 Nov 2014 17:18:59 PST