Instructables: exploring - workshop - woodworking - saw http://www.instructables.com Wed, 25 May 2016 20:05:51 PDT BLOX v1.01 Scroll Saw Stand http://www.instructables.com/id/Scroll-Saw-Stand/
Scroll Saw Stand - More DIY How To Projects]]> http://cdn.instructables.com/FUK/5ZJ0/IOEXWYHM/FUK5ZJ0IOEXWYHM.SQUARE2.jpg http://cdn.instructables.com/FUK/5ZJ0/IOEXWYHM/FUK5ZJ0IOEXWYHM.SQUARE.jpg http://cdn.instructables.com/FUK/5ZJ0/IOEXWYHM/FUK5ZJ0IOEXWYHM.SMALL.jpg Making it Matters This is a 2-part series of a build video for a scroll saw stand. I didn't mind the stand that came with the saw, but I'm after near perfect shop solutions. This is close to that mythical state. In the first video I build the structure, and in the second video I complete it with focus on finishing an...
By: Making it Matters

Continue Reading »]]>
Fri, 20 May 2016 17:16:47 PDT
Homemade Mini Circular Table Saw DIY Wood PCB Cutting Machine with Motor Drill http://www.instructables.com/id/Homemade-Mini-Circular-Table-Saw-DIY-Wood-PCB-Cutt/
Homemade Mini Circular Table Saw DIY Wood PCB Cutting Machine with Motor Drill - More DIY How To Projects]]> http://cdn.instructables.com/FUP/B9LC/INI7SZGE/FUPB9LCINI7SZGE.SQUARE2.jpg http://cdn.instructables.com/FUP/B9LC/INI7SZGE/FUPB9LCINI7SZGE.SQUARE.jpg http://cdn.instructables.com/FUP/B9LC/INI7SZGE/FUPB9LCINI7SZGE.SMALL.jpg joulethief669 Homemade Mini Circular Table Saw DIY Wood PCB Cutting Machine with Motor DrillOne of the most important tools in handmade or DIY amateur are table mini saw and press drill. Since I don’t have a workshop and I am not used to make big things, my perfect tool would be this saw, but very small.This lon...
By: joulethief669

Continue Reading »]]>
Tue, 26 Apr 2016 23:42:02 PDT
Easy and beautiful cutting/cheese board http://www.instructables.com/id/Easy-and-Beautiful-Cutting-Board/
Easy and beautiful cutting/cheese board - More DIY How To Projects]]> http://cdn.instructables.com/FQO/GTOW/INER70N8/FQOGTOWINER70N8.SQUARE2.jpg http://cdn.instructables.com/FQO/GTOW/INER70N8/FQOGTOWINER70N8.SQUARE.jpg http://cdn.instructables.com/FQO/GTOW/INER70N8/FQOGTOWINER70N8.SMALL.jpg grunda In this instructable (my first), I will show you all how to build a simple yet beautiful wooden cutting board that is very easy to make without sophisticated tools. Speaking of tools, the only complicated tool required is a saw that can cut nice thin and straight strips of hardwood. There are a few ...
By: grunda

Continue Reading »]]>
Tue, 26 Apr 2016 17:48:53 PDT
Three Ways to Saw Straight with a Handsaw http://www.instructables.com/id/Three-Ways-to-Saw-Straight-With-a-Handsaw/
Three Ways to Saw Straight with a Handsaw - More DIY How To Projects]]> http://cdn.instructables.com/FPQ/E6PG/IMF641QV/FPQE6PGIMF641QV.SQUARE2.jpg http://cdn.instructables.com/FPQ/E6PG/IMF641QV/FPQE6PGIMF641QV.SQUARE.jpg http://cdn.instructables.com/FPQ/E6PG/IMF641QV/FPQE6PGIMF641QV.SMALL.jpg Wood Review Raf Nathan shows three ways to handsaw breadboard ends off a tabletop and get straight and square results.For more how to guides and reviews, check out www.woodreview.com.au or Wood Review TV.
By: Wood Review

Continue Reading »]]>
Wed, 30 Mar 2016 22:37:54 PDT
Homemade Wooden Watch (From Scratch) http://www.instructables.com/id/Homemade-Wooden-Watch-From-Scratch/
Homemade Wooden Watch (From Scratch) - More DIY How To Projects]]> http://cdn.instructables.com/FGJ/12QX/IMDZ8UGR/FGJ12QXIMDZ8UGR.SQUARE2.jpg http://cdn.instructables.com/FGJ/12QX/IMDZ8UGR/FGJ12QXIMDZ8UGR.SQUARE.jpg http://cdn.instructables.com/FGJ/12QX/IMDZ8UGR/FGJ12QXIMDZ8UGR.SMALL.jpg Joo Min AndrewP Hi,I love woodworking and one day spontaneously decided to make a watch out of wood.This may not quite be an "Instructables", but rather an explanation as to how I went about doing this with very limited amount of tools.Hope you guys enjoy! Dismantle an existing watch I had a watch that I purchas...
By: Joo Min AndrewP

Continue Reading »]]>
Wed, 30 Mar 2016 10:47:31 PDT
Simple, Clean Door Pulls http://www.instructables.com/id/Simple-Clean-Door-Pulls/
Simple, Clean Door Pulls - More DIY How To Projects]]> http://cdn.instructables.com/FZT/XUQ8/ILV8CRDF/FZTXUQ8ILV8CRDF.SQUARE2.jpg http://cdn.instructables.com/FZT/XUQ8/ILV8CRDF/FZTXUQ8ILV8CRDF.SQUARE.jpg http://cdn.instructables.com/FZT/XUQ8/ILV8CRDF/FZTXUQ8ILV8CRDF.SMALL.jpg jessemckee At the close of every project, I'm left with a few scraps here and there and in an effort to organize my shop, I've been able to build several cabinets out of these extras. I use these cabinets to store all my shop stuff, from tools to stain. I like closed cabinets as opposed to open shelving as saw...
By: jessemckee

Continue Reading »]]>
Mon, 28 Mar 2016 21:50:53 PDT
Wooden Horse Using Only Homemade Knife http://www.instructables.com/id/Wooden-Horse-Using-Only-Homemade-Knife/
Wooden Horse Using Only Homemade Knife - More DIY How To Projects]]> http://cdn.instructables.com/FYM/OLV7/ILQVHICX/FYMOLV7ILQVHICX.SQUARE2.jpg http://cdn.instructables.com/FYM/OLV7/ILQVHICX/FYMOLV7ILQVHICX.SQUARE.jpg http://cdn.instructables.com/FYM/OLV7/ILQVHICX/FYMOLV7ILQVHICX.SMALL.jpg bobes360 Today I am going to show you how I made my horse using just my homemade knife. Remember !! This is my first attempt to carve something so don't judge hard. 1. Finding suitable wood First you need to find some soft wood good for carving. I used lime-tree but anything soft will work. You need it t...
By: bobes360

Continue Reading »]]>
Sun, 13 Mar 2016 14:41:42 PDT
Make a Note Box with a Japanese Lock http://www.instructables.com/id/Make-a-Note-Box-With-a-Japanese-Lock/
Make a Note Box with a Japanese Lock - More DIY How To Projects]]> http://cdn.instructables.com/FTB/2UNJ/IL15LHQP/FTB2UNJIL15LHQP.SQUARE2.jpg http://cdn.instructables.com/FTB/2UNJ/IL15LHQP/FTB2UNJIL15LHQP.SQUARE.jpg http://cdn.instructables.com/FTB/2UNJ/IL15LHQP/FTB2UNJIL15LHQP.SMALL.jpg jessemckee The pictured boxes were a present for a good friend's wedding. He asked for a couple boxes to sit on the guest sign in table, one to hold a bottle of wine and the other would hold notes from friends and family attending the wedding. The plan is for them to open both boxes on their one year anniversa...
By: jessemckee

Continue Reading »]]>
Wed, 24 Feb 2016 17:05:35 PST
Carved Wooden Tooth http://www.instructables.com/id/Carved-Wooden-Tooth/
Carved Wooden Tooth - More DIY How To Projects]]> http://cdn.instructables.com/FW4/32L1/IKYG9W0B/FW432L1IKYG9W0B.SQUARE2.jpg http://cdn.instructables.com/FW4/32L1/IKYG9W0B/FW432L1IKYG9W0B.SQUARE.jpg http://cdn.instructables.com/FW4/32L1/IKYG9W0B/FW432L1IKYG9W0B.SMALL.jpg IsSu2911 Heyho,first of all I'd like to explain why the hell I carved a wooden tooth. :DI'm a student in dental school, so many of my friends are going to be Dentists, too. A few months ago I carved a lower jaw out of soap as a present for one of them and thought that it also might be a funny present to use ...
By: IsSu2911

Continue Reading »]]>
Mon, 22 Feb 2016 14:21:23 PST
Grippy Work Holders ! http://www.instructables.com/id/Grippy-Work-Holders-/
Grippy Work Holders ! - More DIY How To Projects]]> http://cdn.instructables.com/F7W/R2ET/IKSL0U3O/F7WR2ETIKSL0U3O.SQUARE2.jpg http://cdn.instructables.com/F7W/R2ET/IKSL0U3O/F7WR2ETIKSL0U3O.SQUARE.jpg http://cdn.instructables.com/F7W/R2ET/IKSL0U3O/F7WR2ETIKSL0U3O.SMALL.jpg Tom Howbridge Build these super effective grippy work holders ! also know as bench cookiesIt makes for an incredibly useful tool whilst it does move a little when using a finishing orbital sander on worktop surface it grips really well when using the random orbit sander, circular saw and the router it holds it fi...
By: Tom Howbridge

Continue Reading »]]>
Thu, 18 Feb 2016 19:07:32 PST
Bandsaw Box http://www.instructables.com/id/Bandsaw-Box-3/
Bandsaw Box - More DIY How To Projects]]> http://cdn.instructables.com/FI4/6LX5/IKPQ1ZT4/FI46LX5IKPQ1ZT4.SQUARE2.jpg http://cdn.instructables.com/FI4/6LX5/IKPQ1ZT4/FI46LX5IKPQ1ZT4.SQUARE.jpg http://cdn.instructables.com/FI4/6LX5/IKPQ1ZT4/FI46LX5IKPQ1ZT4.SMALL.jpg kevincarruthers My grand-daughter has a birthday coming and I thought she might like a jewelry box I Used I had a piece of 3/4" pine panel so I cut it into 4 9"x6" pieces and laminated them together to get a 9x6x3 block and a 9"x6" piece of 1/4" birch plywood. I traced the block onto paper and started drawing di...
By: kevincarruthers

Continue Reading »]]>
Tue, 16 Feb 2016 15:34:01 PST
Supplemental Wood Dust & Chip Collection http://www.instructables.com/id/Supplemental-Dust-Collection/
Supplemental Wood Dust & Chip Collection - More DIY How To Projects]]> http://cdn.instructables.com/FZD/ZS28/IK7N93LP/FZDZS28IK7N93LP.SQUARE2.jpg http://cdn.instructables.com/FZD/ZS28/IK7N93LP/FZDZS28IK7N93LP.SQUARE.jpg http://cdn.instructables.com/FZD/ZS28/IK7N93LP/FZDZS28IK7N93LP.SMALL.jpg KellyCraig My table saw has dust collection capability by way of a four inch bottom port and an over-arm collector. I use the bottom port religiously, but the over-arm collector only gets used with wider boards, or when hold-downs are used, because it interferes with using a push block.My band saw had just a ...
By: KellyCraig

Continue Reading »]]>
Thu, 4 Feb 2016 09:55:30 PST
PLYWOOD DRINK COASTERS ! http://www.instructables.com/id/PLYWOOD-DRINK-COASTERS-/
PLYWOOD DRINK COASTERS ! - More DIY How To Projects]]> http://cdn.instructables.com/F2O/J34C/IK4CK9CK/F2OJ34CIK4CK9CK.SQUARE2.jpg http://cdn.instructables.com/F2O/J34C/IK4CK9CK/F2OJ34CIK4CK9CK.SQUARE.jpg http://cdn.instructables.com/F2O/J34C/IK4CK9CK/F2OJ34CIK4CK9CK.SMALL.jpg Tom Howbridge Turn your scrap plywood into something which is both beautiful and functional.I would highly recommend you use the highest quality you can get as it will make your life easier as it will have no voids, I used a scrap piece I had.Watch the video HERE I ripped my 18 mm thick plywood down to 100 m...
By: Tom Howbridge

Continue Reading »]]>
Mon, 1 Feb 2016 13:33:55 PST
Band Saw Blade Storage http://www.instructables.com/id/Band-Saw-Blade-Storage/
Band Saw Blade Storage - More DIY How To Projects]]> http://cdn.instructables.com/FWL/7IG5/IJQNZ2U3/FWL7IG5IJQNZ2U3.SQUARE2.jpg http://cdn.instructables.com/FWL/7IG5/IJQNZ2U3/FWL7IG5IJQNZ2U3.SQUARE.jpg http://cdn.instructables.com/FWL/7IG5/IJQNZ2U3/FWL7IG5IJQNZ2U3.SMALL.jpg KellyCraig During the over forty years I've been making sawdust, storing the blades used on the tools from which it is made has always been an issue, for both me and many other woodworkers. Part of the reason is, we end up using every square foot of shop wall for storage of tools, patterns, jigs and other thi...
By: KellyCraig

Continue Reading »]]>
Sat, 23 Jan 2016 10:36:45 PST
Band Saw Log Sled http://www.instructables.com/id/Band-Saw-Log-Sled/
Band Saw Log Sled - More DIY How To Projects]]> http://cdn.instructables.com/F8L/W3MQ/IJQ26KU1/F8LW3MQIJQ26KU1.SQUARE2.jpg http://cdn.instructables.com/F8L/W3MQ/IJQ26KU1/F8LW3MQIJQ26KU1.SQUARE.jpg http://cdn.instructables.com/F8L/W3MQ/IJQ26KU1/F8LW3MQIJQ26KU1.SMALL.jpg KellyCraig There are a lot of band saw sled plans on the net. Here are some of the characteristics of ones I found:1) Every log sled relied on the miter slot to make straight cuts. Since most saws have the miter slot to the right of the blade, the log is, of course, cut to the right of the blade. This puts ...
By: KellyCraig

Continue Reading »]]>
Fri, 22 Jan 2016 13:41:42 PST
Custom Wood Workbench http://www.instructables.com/id/Custom-Wood-Workbench/
Custom Wood Workbench - More DIY How To Projects]]> http://cdn.instructables.com/FCH/B3PX/IJORXJC5/FCHB3PXIJORXJC5.SQUARE2.jpg http://cdn.instructables.com/FCH/B3PX/IJORXJC5/FCHB3PXIJORXJC5.SQUARE.jpg http://cdn.instructables.com/FCH/B3PX/IJORXJC5/FCHB3PXIJORXJC5.SMALL.jpg cyranohadden After finally moving out of an apartment and into a house, I found I had space! The previous renters left a 2 1/2ft tall table in the garage, but it was hardly ideal to do any kind of work on. Thus was born the idea for a work bench. I spent about a month designing the bench, trying to fulfill sev...
By: cyranohadden

Continue Reading »]]>
Fri, 22 Jan 2016 09:48:19 PST
Precision Digital Table Saw with Arduino Oversampling http://www.instructables.com/id/Precision-Digital-Table-Saw-With-Arduino-Oversampl/
Precision Digital Table Saw with Arduino Oversampling - More DIY How To Projects]]> http://cdn.instructables.com/F00/W8KR/IJ5TX2JS/F00W8KRIJ5TX2JS.SQUARE2.jpg http://cdn.instructables.com/F00/W8KR/IJ5TX2JS/F00W8KRIJ5TX2JS.SQUARE.jpg http://cdn.instructables.com/F00/W8KR/IJ5TX2JS/F00W8KRIJ5TX2JS.SMALL.jpg RocketScientist A few months ago I discovered the YouTube woodworking community and the likes of Darbin Orvar and Bob Clagett. I've learned a great deal from watching their videos and I really appreciate their blend of woodworking and electronics. When I got my first 'new-to-me' table saw, I thought about how cool ...
By: RocketScientist

Continue Reading »]]>
Fri, 8 Jan 2016 10:14:54 PST
DIY Mini Circular Saw for Homemade Woodworking http://www.instructables.com/id/DIY-Mini-Circular-Saw-for-Homemade-Woodworking/
DIY Mini Circular Saw for Homemade Woodworking - More DIY How To Projects]]> http://cdn.instructables.com/FZ4/IGCW/IJ7WOOB9/FZ4IGCWIJ7WOOB9.SQUARE2.jpg http://cdn.instructables.com/FZ4/IGCW/IJ7WOOB9/FZ4IGCWIJ7WOOB9.SQUARE.jpg http://cdn.instructables.com/FZ4/IGCW/IJ7WOOB9/FZ4IGCWIJ7WOOB9.SMALL.jpg joulethief669 My important tools for workshop or DIY amateur, is a table saw. Since I don’t have a workshop and I am not used to make big things, my perfect tool would be this saw, but very small. If we look for a small saw we’ll see that there are only two or three options in the shops, and are quite expensive. ...
By: joulethief669

Continue Reading »]]>
Fri, 8 Jan 2016 07:52:43 PST
Make your own (cheap and easy) Hand Planer http://www.instructables.com/id/Make-Your-Own-cheap-and-Easy-Hand-Planer/
Make your own (cheap and easy) Hand Planer - More DIY How To Projects]]> http://cdn.instructables.com/FAG/DP9Y/IIAOK0SV/FAGDP9YIIAOK0SV.SQUARE2.jpg http://cdn.instructables.com/FAG/DP9Y/IIAOK0SV/FAGDP9YIIAOK0SV.SQUARE.jpg http://cdn.instructables.com/FAG/DP9Y/IIAOK0SV/FAGDP9YIIAOK0SV.SMALL.jpg Paoson Woodwork I had been searching the market for new hand planes to my workshop. There are several brands and models but they're usually so expensive tools, so after a long research on the internet, I figured out how to recycle my old cutting discs from my circular saw and plywood remains.I started the design in...
By: Paoson Woodwork

Continue Reading »]]>
Wed, 16 Dec 2015 03:35:27 PST
Custom Cutting Board - Project http://www.instructables.com/id/Custom-Cutting-Board-Project/
Custom Cutting Board - Project - More DIY How To Projects]]> http://cdn.instructables.com/FRK/S6HH/II1LHRKO/FRKS6HHII1LHRKO.SQUARE2.jpg http://cdn.instructables.com/FRK/S6HH/II1LHRKO/FRKS6HHII1LHRKO.SQUARE.jpg http://cdn.instructables.com/FRK/S6HH/II1LHRKO/FRKS6HHII1LHRKO.SMALL.jpg KiteArmy Hey everyone! I just completed a really simple and fun project that is going to make a great gift. I did it all with this great little desktop saw. I have put together a video to demonstrate all the steps. I bought the cutting board from Home Depot for $7.99. Alright, lets get to work. Things...
By: KiteArmy

Continue Reading »]]>
Fri, 11 Dec 2015 08:18:02 PST
Custom Wood Wall Piece http://www.instructables.com/id/Custom-Wood-Wall-Piece/
Custom Wood Wall Piece - More DIY How To Projects]]> http://cdn.instructables.com/F3U/B39N/II0M8C24/F3UB39NII0M8C24.SQUARE2.jpg http://cdn.instructables.com/F3U/B39N/II0M8C24/F3UB39NII0M8C24.SQUARE.jpg http://cdn.instructables.com/F3U/B39N/II0M8C24/F3UB39NII0M8C24.SMALL.jpg Corasaurus Rex Custom Wood, Wall Piece What do you get the man who has everything? NOTHING you build him a Custom Wood Wall Piece. Okay so my boss is a great guy and is always helping me out when I need anything. Because he owns his own quite successful landscape company he pretty much has the most badass back y...
By: Corasaurus Rex

Continue Reading »]]>
Thu, 10 Dec 2015 13:02:29 PST
Make your own wood comb! http://www.instructables.com/id/Make-your-own-wood-comb/
Make your own wood comb! - More DIY How To Projects]]> http://cdn.instructables.com/FGN/4M4O/IH56JDU4/FGN4M4OIH56JDU4.SQUARE2.jpg http://cdn.instructables.com/FGN/4M4O/IH56JDU4/FGN4M4OIH56JDU4.SQUARE.jpg http://cdn.instructables.com/FGN/4M4O/IH56JDU4/FGN4M4OIH56JDU4.SMALL.jpg gearboxdesigns In this video I will show you how to make your very own beard comb! Wood combs are awesome because they help distribute your natural oils and do not create static, which leads to split ends and weird beard. You can make one with limited tools. I use a scroll saw in this video, but you could use a co...
By: gearboxdesigns

Continue Reading »]]>
Wed, 18 Nov 2015 16:00:35 PST
Mini Table Saw http://www.instructables.com/id/Mini-Table-Saw-1/
Mini Table Saw - More DIY How To Projects]]> http://cdn.instructables.com/F5N/2T11/IG1424IY/F5N2T11IG1424IY.SQUARE2.jpg http://cdn.instructables.com/F5N/2T11/IG1424IY/F5N2T11IG1424IY.SQUARE.jpg http://cdn.instructables.com/F5N/2T11/IG1424IY/F5N2T11IG1424IY.SMALL.jpg Mr Useful Hi again, Mr Useful here! In this time, we are going to make a Mini Table Saw that really cuts!. Is very simple to make, and it really works for little wooden boards, popsicle sticks and this kind of material.Take a look at the video below and I hope you enjoy the vídeo.Please leave your comment, I ...
By: Mr Useful

Continue Reading »]]>
Wed, 21 Oct 2015 13:41:35 PDT
Train Shelf http://www.instructables.com/id/Train-Shelf/
Train Shelf - More DIY How To Projects]]> http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SQUARE2.jpg http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SQUARE.jpg http://cdn.instructables.com/FMO/E6VB/IFLGEA2L/FMOE6VBIFLGEA2L.SMALL.jpg HUKBMBEAR When I designed the Bi-Plane shelf (see instructable at: http://www.instructables.com/id/Biplane-shelf/ )One of my designs was for a Train shelf, so after making the plane I decided to also have a go at the train, and I think it turned out quite well. I also wanted to do something for the Back To th...
By: HUKBMBEAR

Continue Reading »]]>
Sat, 10 Oct 2015 11:14:48 PDT
Poor Man's Straight Line Rip Sled http://www.instructables.com/id/Poor-Mans-Straight-Line-Rip-Sled/
Poor Man's Straight Line Rip Sled - More DIY How To Projects]]> http://cdn.instructables.com/FDG/BCBN/IEO2XMCJ/FDGBCBNIEO2XMCJ.SQUARE2.jpg http://cdn.instructables.com/FDG/BCBN/IEO2XMCJ/FDGBCBNIEO2XMCJ.SQUARE.jpg http://cdn.instructables.com/FDG/BCBN/IEO2XMCJ/FDGBCBNIEO2XMCJ.SMALL.jpg albertlea101 Years ago I was in need of some walnut wood, and a friend of mine had some rough cut he wanted to get rid of.I live in a very rural area, so getting my planks to a mill house wasn't an option. Snapping a string for straight edge, then free handing the plank through the saw is not fun, and quite dang...
By: albertlea101

Continue Reading »]]>
Thu, 17 Sep 2015 08:51:05 PDT
Saw Handle Pizza Cutter http://www.instructables.com/id/Saw-Handle-Pizza-Cutter/
Saw Handle Pizza Cutter - More DIY How To Projects]]> http://cdn.instructables.com/F96/G56B/IEGXR2YL/F96G56BIEGXR2YL.SQUARE2.jpg http://cdn.instructables.com/F96/G56B/IEGXR2YL/F96G56BIEGXR2YL.SQUARE.jpg http://cdn.instructables.com/F96/G56B/IEGXR2YL/F96G56BIEGXR2YL.SMALL.jpg BCDesign Are you a woodworker? Do you like pizza? if the answer is yes you need to make yourself one of these awesome simple to make Saw Handle Pizza Cutters! What you need: 1 Piece of scrap wood 7"x7" , Pizza Cutter Wheel, Jigsaw/Fret Saw, Sander, Dremel , Mineral Oil, Epoxy Glue & your fav...
By: BCDesign

Continue Reading »]]>
Sat, 12 Sep 2015 17:49:41 PDT
wall of wood http://www.instructables.com/id/wall-of-wood/
wall of wood - More DIY How To Projects]]> http://cdn.instructables.com/FUP/51TE/IBKMKIJW/FUP51TEIBKMKIJW.SQUARE2.jpg http://cdn.instructables.com/FUP/51TE/IBKMKIJW/FUP51TEIBKMKIJW.SQUARE.jpg http://cdn.instructables.com/FUP/51TE/IBKMKIJW/FUP51TEIBKMKIJW.SMALL.jpg FaHaDS Simple action to take advantage of the old panelsYou just need, saw, hammer, nails, meters, drill 1. Install side wall panels. 2. Measure the height of the wall and begin to cut the panels. 3. install the panels on the symptoms (hammer, or drill)....This is everythingbe careful and good luck
By: FaHaDS

Continue Reading »]]>
Mon, 29 Jun 2015 08:01:59 PDT
Simple DIY Candle Holders http://www.instructables.com/id/Simple-DIY-Candle-Holders/
Simple DIY Candle Holders - More DIY How To Projects]]> http://cdn.instructables.com/FV4/PJDL/I9JR7STC/FV4PJDLI9JR7STC.SQUARE2.jpg http://cdn.instructables.com/FV4/PJDL/I9JR7STC/FV4PJDLI9JR7STC.SQUARE.jpg http://cdn.instructables.com/FV4/PJDL/I9JR7STC/FV4PJDLI9JR7STC.SMALL.jpg CurtosNoirDesign Do you know someone in your life that likes candles....and wood? You are in luck because I have the perfect gift instructable with printable temple for FREE!! Mark Your Wood Print out the provided template. Cut out and spray adhere to some scrap wood. This will be your guide to size and hole loca...
By: CurtosNoirDesign

Continue Reading »]]>
Sun, 10 May 2015 13:45:24 PDT
Wood Ford Model T 1:60 replica http://www.instructables.com/id/Wood-Ford-Model-T-160-replica/
Wood Ford Model T 1:60 replica - More DIY How To Projects]]> http://cdn.instructables.com/FC2/VYU5/I74LARPJ/FC2VYU5I74LARPJ.SQUARE2.jpg http://cdn.instructables.com/FC2/VYU5/I74LARPJ/FC2VYU5I74LARPJ.SQUARE.jpg http://cdn.instructables.com/FC2/VYU5/I74LARPJ/FC2VYU5I74LARPJ.SMALL.jpg deluges Here's a wood project I made a while ago, so it is not as documented as it should be... But it gives a couple ideas on how to practice very fine cuts with the scroll saw to make and then assemble tiny tiny parts to make tiny tiny projects. There won't be many pictures as I didn't really take any dur...
By: deluges

Continue Reading »]]>
Wed, 11 Mar 2015 16:33:46 PDT
Carve a Wood Cooking Knife http://www.instructables.com/id/Carve-a-Wood-Cooking-Knife/
Carve a Wood Cooking Knife - More DIY How To Projects]]> http://cdn.instructables.com/FJ2/GDBC/I74N7JGZ/FJ2GDBCI74N7JGZ.SQUARE2.jpg http://cdn.instructables.com/FJ2/GDBC/I74N7JGZ/FJ2GDBCI74N7JGZ.SQUARE.jpg http://cdn.instructables.com/FJ2/GDBC/I74N7JGZ/FJ2GDBCI74N7JGZ.SMALL.jpg jessemckee I made this knife to chop up ground meat in the pan while cooking.It's made from a sycamore branch. Sycamore has a nice, closed grain that is suitable for food utensils. I have also made spoons and other things from various logs that I've collected over the years. The Tools The main tools I used ...
By: jessemckee

Continue Reading »]]>
Wed, 11 Mar 2015 14:47:46 PDT
DIY Desk with Vinyl Flooring Top http://www.instructables.com/id/DIY-Desk-with-Vinyl-Flooring-Top/
DIY Desk with Vinyl Flooring Top - More DIY How To Projects]]> http://cdn.instructables.com/FYP/2URH/I5WCQHMK/FYP2URHI5WCQHMK.SQUARE2.jpg http://cdn.instructables.com/FYP/2URH/I5WCQHMK/FYP2URHI5WCQHMK.SQUARE.jpg http://cdn.instructables.com/FYP/2URH/I5WCQHMK/FYP2URHI5WCQHMK.SMALL.jpg majjuss Hello to all fellow Instructablers and Woodworkers!I would like to share my new desk that I made with you.The old one in my bedroom got too small so I figured I needed a bigger one.The Frame is from timber I got at our local hardware store, the top is made of self-adhesive vinyl flooring panels.Sinc...
By: majjuss

Continue Reading »]]>
Sun, 8 Feb 2015 15:11:50 PST
Make a Bow Saw! http://www.instructables.com/id/Make-a-Bow-Saw/
Make a Bow Saw! - More DIY How To Projects]]> http://cdn.instructables.com/FSV/TSVX/I53I0A3J/FSVTSVXI53I0A3J.SQUARE2.jpg http://cdn.instructables.com/FSV/TSVX/I53I0A3J/FSVTSVXI53I0A3J.SQUARE.jpg http://cdn.instructables.com/FSV/TSVX/I53I0A3J/FSVTSVXI53I0A3J.SMALL.jpg randomtower Welcome to another barbaric attempt at an Instructable! I am Steven, and I will be your host for today's woodworking shenanigans. Now, onto the subject of this tutorial: A bow saw, also called a frame saw. It is a type of saw popular in Europe, and can be seen being used in The Art of the Carpenter ...
By: randomtower

Continue Reading »]]>
Mon, 19 Jan 2015 15:18:28 PST
Basic Introduction to Wood Turning for FUN, for Gifts, FOR SAFETY (updated) http://www.instructables.com/id/Basic-Introduction-to-Wood-Turning-for-FUN/
Basic Introduction to Wood Turning for FUN, for Gifts, FOR SAFETY (updated) - More DIY How To Projects]]> http://cdn.instructables.com/FG3/3DYO/I4J6YTT3/FG33DYOI4J6YTT3.SQUARE2.jpg http://cdn.instructables.com/FG3/3DYO/I4J6YTT3/FG33DYOI4J6YTT3.SQUARE.jpg http://cdn.instructables.com/FG3/3DYO/I4J6YTT3/FG33DYOI4J6YTT3.SMALL.jpg HUKBMBEAR Ive completed a number of guides for various wood turning projects, so I thought I would do one that covered a few of the areas you need to consider before during and after you have made your hand made in wood?? gift.The question marks are there because wood is not the only material available to you...
By: HUKBMBEAR

Continue Reading »]]>
Tue, 6 Jan 2015 02:25:02 PST
Little Wooden Cars http://www.instructables.com/id/Little-Wooden-Cars/
Little Wooden Cars - More DIY How To Projects]]> http://cdn.instructables.com/FY8/2ERF/I3TI7N9N/FY82ERFI3TI7N9N.SQUARE2.jpg http://cdn.instructables.com/FY8/2ERF/I3TI7N9N/FY82ERFI3TI7N9N.SQUARE.jpg http://cdn.instructables.com/FY8/2ERF/I3TI7N9N/FY82ERFI3TI7N9N.SMALL.jpg MichielD99 My little cousin loves cars and his birthday is coming closer so i had to find a birthday gift but the car toys in shops are so expensive. Thats why i made some pretty cool cars for him by myself and how i did it, you can see in this instructable! What Do We Need? ✤ MATERIALS☞ plank✤ TOOLS☞ figur...
By: MichielD99

Continue Reading »]]>
Wed, 24 Dec 2014 11:35:01 PST
Table Saw Set-up Guide / Gauge http://www.instructables.com/id/Table-Saw-Set-up-Guide-Gauge/
Table Saw Set-up Guide / Gauge - More DIY How To Projects]]> http://cdn.instructables.com/FHN/VCO3/I3A1O0QY/FHNVCO3I3A1O0QY.SQUARE2.jpg http://cdn.instructables.com/FHN/VCO3/I3A1O0QY/FHNVCO3I3A1O0QY.SQUARE.jpg http://cdn.instructables.com/FHN/VCO3/I3A1O0QY/FHNVCO3I3A1O0QY.SMALL.jpg KellyCraig A table saw blade must be perfectly parallel to the miter slots of your table saw top, or it will go through wood at an angle, essentially widening the blade and making even good, sharp blades seem dull. Just as an out of align table saw top will cause poor and difficult cuts, so will an out...
By: KellyCraig

Continue Reading »]]>
Thu, 4 Dec 2014 09:23:16 PST
Keeping Grandpa's Saw Alive http://www.instructables.com/id/Keeping-Grandpas-Saw-Alive/
Keeping Grandpa's Saw Alive - More DIY How To Projects]]> http://cdn.instructables.com/F87/QT4F/I2EM0R3Y/F87QT4FI2EM0R3Y.SQUARE2.jpg http://cdn.instructables.com/F87/QT4F/I2EM0R3Y/F87QT4FI2EM0R3Y.SQUARE.jpg http://cdn.instructables.com/F87/QT4F/I2EM0R3Y/F87QT4FI2EM0R3Y.SMALL.jpg Hollowground17 I found this small hand saw in my grandpa's workshop and knew I had to save it and bring it back to life. It is the perfect size for my scale of work and would be the first panel saw in my collection. The fact that this is my grandpa's makes it all the more special to me.Let's get started!!!! Ho...
By: Hollowground17

Continue Reading »]]>
Tue, 11 Nov 2014 19:38:46 PST
Chevron Wood Bench with Hairpin Legs! http://www.instructables.com/id/Chevron-Wood-Bench-with-Hairpin-Legs/
Chevron Wood Bench with Hairpin Legs! - More DIY How To Projects]]> http://cdn.instructables.com/FED/RLAM/I28OIEDO/FEDRLAMI28OIEDO.SQUARE2.jpg http://cdn.instructables.com/FED/RLAM/I28OIEDO/FEDRLAMI28OIEDO.SQUARE.jpg http://cdn.instructables.com/FED/RLAM/I28OIEDO/FEDRLAMI28OIEDO.SMALL.jpg doodlecraft I built a wood bench for my tiny front porch!But turns out my husband likes it...so it ended up in our room!Chevron is such a popular pattern and adds some fun when done with wood! Supplies! Supplies: PlywoodPine boards or reclaimed woodMiter saw/Table sawLiquid NailsApple cider vinegarSteel wool...
By: doodlecraft

Continue Reading »]]>
Sat, 8 Nov 2014 14:36:16 PST
Log pencil holder http://www.instructables.com/id/Log-pencil-holder/
Log pencil holder - More DIY How To Projects]]> http://cdn.instructables.com/FI1/T98Y/I1XEV006/FI1T98YI1XEV006.SQUARE2.jpg http://cdn.instructables.com/FI1/T98Y/I1XEV006/FI1T98YI1XEV006.SQUARE.jpg http://cdn.instructables.com/FI1/T98Y/I1XEV006/FI1T98YI1XEV006.SMALL.jpg buildingandblogging I made this project for free only needed a hand saw, drill and drill bit, and optional finishing sander. It did take a bit to find a good log to use to cut up. Go for a walk and look in the woods. A hand saw can cut threw the log pretty quick. Im not sure what kind of wood it is. I added stain to a...
By: buildingandblogging

Continue Reading »]]>
Sat, 1 Nov 2014 15:48:58 PDT
Add a router table to a table saw http://www.instructables.com/id/Add-a-router-table-to-a-table-saw/
Add a router table to a table saw - More DIY How To Projects]]> http://cdn.instructables.com/FQL/3DZQ/I1565R6K/FQL3DZQI1565R6K.SQUARE2.jpg http://cdn.instructables.com/FQL/3DZQ/I1565R6K/FQL3DZQI1565R6K.SQUARE.jpg http://cdn.instructables.com/FQL/3DZQ/I1565R6K/FQL3DZQI1565R6K.SMALL.jpg makendo A router table + router came on sale locally (similar to this one), so I picked it up but hadn't anticipated just how much room it would take up on my workbench. However, my table saw has an extension that was not really doing anything other than allowing me to cut large stock. Luckily (because I di...
By: makendo

Continue Reading »]]>
Mon, 13 Oct 2014 14:36:09 PDT
Restoring a damaged table edge http://www.instructables.com/id/Restoring-a-damaged-table-edge/
Restoring a damaged table edge - More DIY How To Projects]]> http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SQUARE2.jpg http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SQUARE.jpg http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SMALL.jpg gregorio626 The top is subject to more general wear and tear than other areas of a table, especially if they are used for meals or children draw at them. Scratches, dents, and stains are commonplace, and other problems can frequently occur with table tops warping, , splitting, and damaged decorative edges. Fret...
By: gregorio626

Continue Reading »]]>
Sun, 28 Sep 2014 14:19:48 PDT
Simple wooden knobs http://www.instructables.com/id/Simple-wooden-knobs/
Simple wooden knobs - More DIY How To Projects]]> http://cdn.instructables.com/F5Y/TW16/HZTO9EG8/F5YTW16HZTO9EG8.SQUARE2.jpg http://cdn.instructables.com/F5Y/TW16/HZTO9EG8/F5YTW16HZTO9EG8.SQUARE.jpg http://cdn.instructables.com/F5Y/TW16/HZTO9EG8/F5YTW16HZTO9EG8.SMALL.jpg ade angelis Hello, everybody. a few days ago I finished building a table for my drill press. It's not really elaborate, but it has some nice features. you can see it in this video :http://youtu.be/WyN1PWIJPpU . Anyway, in this instructable I'll show you how I made the turning knobs I used in the project: two of...
By: ade angelis

Continue Reading »]]>
Mon, 8 Sep 2014 08:59:23 PDT
A Garage Door Makes A Precision Reference http://www.instructables.com/id/A-Garage-Door-Makes-A-Precision-Reference/
A Garage Door Makes A Precision Reference - More DIY How To Projects]]> http://cdn.instructables.com/FG7/V7RF/HYU8BPAU/FG7V7RFHYU8BPAU.SQUARE2.jpg http://cdn.instructables.com/FG7/V7RF/HYU8BPAU/FG7V7RFHYU8BPAU.SQUARE.jpg http://cdn.instructables.com/FG7/V7RF/HYU8BPAU/FG7V7RFHYU8BPAU.SMALL.jpg BeachsideHank I was looking at my garage door one day and noticed the stiffener channel running the 16 foot length (4.88m) seemed to be rather straight, so I put up a string line to see what it may be and found there was only about a 1/16” dip (1.59mm) over that distance. Very impressive I thought; that is more t...
By: BeachsideHank

Continue Reading »]]>
Thu, 14 Aug 2014 18:23:43 PDT
Pocket Hole Plugs http://www.instructables.com/id/Pocket-Hole-Plug-Cutting-Jig-for-the-Band-Saw/
Pocket Hole Plugs - More DIY How To Projects]]> http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SQUARE2.jpg http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SQUARE.jpg http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SMALL.jpg KellyCraig I needed some pocket hole plugs for a paint grade project I was doing for my wife. I live a couple hours, round trip, from supply sources, so not having any on hand was a problem.A package of fifty pocket hole plugs runs about seven dollars, or more from local venders and about the same on line. I...
By: KellyCraig

Continue Reading »]]>
Mon, 21 Jul 2014 13:42:30 PDT
Wooden flower cross with scroll saw http://www.instructables.com/id/Wooden-flower-cross-with-scroll-saw/
Wooden flower cross with scroll saw - More DIY How To Projects]]> http://cdn.instructables.com/F5U/V4YM/HSM562VV/F5UV4YMHSM562VV.SQUARE2.jpg http://cdn.instructables.com/F5U/V4YM/HSM562VV/F5UV4YMHSM562VV.SQUARE.jpg http://cdn.instructables.com/F5U/V4YM/HSM562VV/F5UV4YMHSM562VV.SMALL.jpg jlepack It all starts out by choosing a nice pattern. Found this one by searching Google. Glue to work piece After printing out your pattern, spray the back of the image with spray adhesive. I use 3m but others will work too. Press it onto your work piece. Drill holes and begin cutting out. I use a sm...
By: jlepack

Continue Reading »]]>
Wed, 12 Mar 2014 19:21:52 PDT
Multi-Tool Stand http://www.instructables.com/id/Multi-Tool-Stand/
Multi-Tool Stand - More DIY How To Projects]]> http://cdn.instructables.com/FFB/EIZ3/HS0D3EIC/FFBEIZ3HS0D3EIC.SQUARE2.jpg http://cdn.instructables.com/FFB/EIZ3/HS0D3EIC/FFBEIZ3HS0D3EIC.SQUARE.jpg http://cdn.instructables.com/FFB/EIZ3/HS0D3EIC/FFBEIZ3HS0D3EIC.SMALL.jpg JmsDwh When I was making my Radiator Cover a few years back, I needed a way to make a rabbet on the back to accept the plywood back. I didn't have my table saw yet, but I did have a handheld router. I didn't have the fence attachment for my router, but I had this little knock-off workmate that I thought I ...
By: JmsDwh

Continue Reading »]]>
Sun, 23 Feb 2014 08:37:55 PST
All Natural Coasters http://www.instructables.com/id/All-Natural-Coasters/
All Natural Coasters - More DIY How To Projects]]> http://cdn.instructables.com/FLP/4ANB/HRNQ7HNO/FLP4ANBHRNQ7HNO.SQUARE2.jpg http://cdn.instructables.com/FLP/4ANB/HRNQ7HNO/FLP4ANBHRNQ7HNO.SQUARE.jpg http://cdn.instructables.com/FLP/4ANB/HRNQ7HNO/FLP4ANBHRNQ7HNO.SMALL.jpg backflip11 Do need that perfect touch fit the cabin on the lake well you need a set of log coasters Find Log Find a Log that is about 4 inches in diameter and see if it has any cracks in it. Cut Cut into 1/4 in thick disk and collect in a bucket then rinse all the saw dust off of then when they dry I co...
By: backflip11

Continue Reading »]]>
Fri, 14 Feb 2014 13:17:58 PST
Deep Dish Cove Cut Slab Table Top Experiment http://www.instructables.com/id/Deep-Dish-Cove-Cut-Slab-Table-Top-Experiment/
Deep Dish Cove Cut Slab Table Top Experiment - More DIY How To Projects]]> http://cdn.instructables.com/FYA/HIGA/HR4STAUN/FYAHIGAHR4STAUN.SQUARE2.jpg http://cdn.instructables.com/FYA/HIGA/HR4STAUN/FYAHIGAHR4STAUN.SQUARE.jpg http://cdn.instructables.com/FYA/HIGA/HR4STAUN/FYAHIGAHR4STAUN.SMALL.jpg NelsonStudios Using a circular cove cut to dish an entire slab table top on the table saw.  Please keep in mind this is an experiment as part of an idea for another build.  That said it seemed to work and work well so I am sharing it here.  I have never seen this done before on this scale.  This is an *at your ow...
By: NelsonStudios

Continue Reading »]]>
Sun, 2 Feb 2014 20:23:59 PST
Miter Saw Enhancement http://www.instructables.com/id/Miter-Saw-Enhancement/
Miter Saw Enhancement - More DIY How To Projects]]> http://cdn.instructables.com/F1M/I7KR/HQVPZDMU/F1MI7KRHQVPZDMU.SQUARE2.jpg http://cdn.instructables.com/F1M/I7KR/HQVPZDMU/F1MI7KRHQVPZDMU.SQUARE.jpg http://cdn.instructables.com/F1M/I7KR/HQVPZDMU/F1MI7KRHQVPZDMU.SMALL.jpg tb399 This is not much of an Instructable - but more of an idea that we came across while doing some trim work last weekend. Cutting the inside and outside miters on the trim required us to place the wood 'finish side' down from time to time. Since the finished side was painted white, we kept getting mar...
By: tb399

Continue Reading »]]>
Mon, 27 Jan 2014 06:50:57 PST
Simple Tilting Router Table Insert / Table Saw Extension http://www.instructables.com/id/Simple-Tilting-Router-Table-Insert-Table-Saw-Exten/
Simple Tilting Router Table Insert / Table Saw Extension - More DIY How To Projects]]> http://cdn.instructables.com/FFM/GM8M/HQQLO4SU/FFMGM8MHQQLO4SU.SQUARE2.jpg http://cdn.instructables.com/FFM/GM8M/HQQLO4SU/FFMGM8MHQQLO4SU.SQUARE.jpg http://cdn.instructables.com/FFM/GM8M/HQQLO4SU/FFMGM8MHQQLO4SU.SMALL.jpg savvas_papasavva A simple tilting router insert, which fits into the extension table of my table saw.
By: savvas_papasavva

Continue Reading »]]>
Sat, 25 Jan 2014 07:41:40 PST
Raven beak - wooden guitar pick http://www.instructables.com/id/Raven-beak-wooden-guitar-pick/
Raven beak - wooden guitar pick - More DIY How To Projects]]> http://cdn.instructables.com/FVK/AXKY/HQQIJZ4Z/FVKAXKYHQQIJZ4Z.SQUARE2.jpg http://cdn.instructables.com/FVK/AXKY/HQQIJZ4Z/FVKAXKYHQQIJZ4Z.SQUARE.jpg http://cdn.instructables.com/FVK/AXKY/HQQIJZ4Z/FVKAXKYHQQIJZ4Z.SMALL.jpg Eldalote Hi! I came to this idea since someone mentioned a wooden guitar pick in comments. But my local music shop doesn't sell them, so I decided to make one! Although the playing isn't so comfortable for me it looks just awesome as pendant! :) Things you will need: - piece of wood ( I got mine from an ...
By: Eldalote

Continue Reading »]]>
Wed, 22 Jan 2014 10:07:18 PST