http://www.instructables.com Fri, 24 May 2013 00:14:50 PDT BLOX v1.01 http://www.instructables.com/id/Magnetic-knife-rack-built-using-hard-drive-magnets/
Magnetic knife rack built using hard drive magnets (without power tools) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F7F/493R/HGZOFLBV/F7F493RHGZOFLBV.SQUARE2.jpg http://www.instructables.com/files/deriv/F7F/493R/HGZOFLBV/F7F493RHGZOFLBV.SQUARE.jpg http://www.instructables.com/files/deriv/F7F/493R/HGZOFLBV/F7F493RHGZOFLBV.SMALL.jpg tzny After obsessively taking apart numerous dead hard drives (befriend your IT folks, and you too can have this treasure), I've accumulated way too many of those powerful magnets. What to make? An anti-gravity device? No, that's too much work. I know -- a magnetic knife rack! I wish I had more garage sp...
By: tzny

Continue Reading »]]> Wed, 22 May 2013 13:36:25 PDT http://www.instructables.com/id/Quick-and-Easy-Wooden-Catapult/
Quick and Easy Wooden Catapult - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1B/Q5Y4/HGU2K0JV/F1BQ5Y4HGU2K0JV.SQUARE2.jpg http://www.instructables.com/files/deriv/F1B/Q5Y4/HGU2K0JV/F1BQ5Y4HGU2K0JV.SQUARE.jpg http://www.instructables.com/files/deriv/F1B/Q5Y4/HGU2K0JV/F1BQ5Y4HGU2K0JV.SMALL.jpg powellcubs This catapult is doable in about half an hour to forty-five minutes. It doesn't launch very far due to the elasticity of this bungee cord, but a motorcycle strap would much work better. Parts Parts: 3" hinge (I bought a door hinge from Walmart with the screws) 8' of 2x4 12 decking screws 4 eye bo...
By: powellcubs

Continue Reading »]]> Wed, 22 May 2013 06:49:34 PDT http://www.instructables.com/id/How-to-make-a-matching-knife-handle-and-sheath/
How to make a matching knife handle and sheath - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFN/8G65/HGIEWD93/FFN8G65HGIEWD93.SQUARE2.jpg http://www.instructables.com/files/deriv/FFN/8G65/HGIEWD93/FFN8G65HGIEWD93.SQUARE.jpg http://www.instructables.com/files/deriv/FFN/8G65/HGIEWD93/FFN8G65HGIEWD93.SMALL.jpg beucephalus So I got an old hand me down knife from a friend, and decided it needed some TLC. It's an old stainless steel blade and was a real pain to sharpen, but it all turned out pretty well. Most of the tools I used are not expensive, but it does take some skill and experience with power and hand tools. Rem...
By: beucephalus

Continue Reading »]]> Fri, 17 May 2013 15:55:06 PDT http://www.instructables.com/id/Reclaimed-Wood-Flat-Pack-Picnic-Table-With-Planter/
Reclaimed Wood Flat-Pack Picnic Table With Planter/Ice Trough - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F58/IGUW/HFSHSH7V/F58IGUWHFSHSH7V.SQUARE2.jpg http://www.instructables.com/files/deriv/F58/IGUW/HFSHSH7V/F58IGUWHFSHSH7V.SQUARE.jpg http://www.instructables.com/files/deriv/F58/IGUW/HFSHSH7V/F58IGUWHFSHSH7V.SMALL.jpg quitethecontrary Here's our Reclaimed Wood Flat Pack Picnic Table With Planter (I know.  It's a mouthful).  There is a gutter running down the center below the tabletop surface that can be filled with ice to put your beers in on a hot day, or for planting herbs (reach across the table to get the freshest seasoning f...
By: quitethecontrary

Continue Reading »]]> Mon, 13 May 2013 21:16:09 PDT http://www.instructables.com/id/Handprints-with-a-turned-wood-frame/
Mothers-Day handprints with a turned wood frame. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FXQ/IH13/HGHAP2V0/FXQIH13HGHAP2V0.SQUARE2.jpg http://www.instructables.com/files/deriv/FXQ/IH13/HGHAP2V0/FXQIH13HGHAP2V0.SQUARE.jpg http://www.instructables.com/files/deriv/FXQ/IH13/HGHAP2V0/FXQIH13HGHAP2V0.SMALL.jpg SlickSqueegie I'm sure most of you out there have heard of, seen or made the childrens hand-print molds with the pie tin and plaster of paris. My fiance wanted to help her niece and nephew make some hand-prints for their mom for mothers day.  That gave me an idea for the molds. Instead of using a pie tin, I had a...
By: SlickSqueegie

Continue Reading »]]> Thu, 9 May 2013 10:31:29 PDT http://www.instructables.com/id/Carving-a-Eagle-Feather/
Carving a Eagle Feather - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F9Z/EN0Y/HFSHUKXO/F9ZEN0YHFSHUKXO.SQUARE2.jpg http://www.instructables.com/files/deriv/F9Z/EN0Y/HFSHUKXO/F9ZEN0YHFSHUKXO.SQUARE.jpg http://www.instructables.com/files/deriv/F9Z/EN0Y/HFSHUKXO/F9ZEN0YHFSHUKXO.SMALL.jpg coondog73 In this instructable I'm going to show how to carve a feather with a eagle head on in. This is a simple carving that a beginner should be able to do easily. Items Needed 1. Piece of wood about 14x3x3/8. I used a slat of a pallet but any soft wood will be fine. 2. Pattern. I included one for you t...
By: coondog73

Continue Reading »]]> Sat, 27 Apr 2013 18:08:34 PDT http://www.instructables.com/id/tea-staining/ http://www.instructables.com/files/deriv/FRR/I9LH/HFSHSPZF/FRRI9LHHFSHSPZF.SQUARE2.jpg http://www.instructables.com/files/deriv/FRR/I9LH/HFSHSPZF/FRRI9LHHFSHSPZF.SQUARE.jpg http://www.instructables.com/files/deriv/FRR/I9LH/HFSHSPZF/FRRI9LHHFSHSPZF.SMALL.jpg mikeasaurus Think that staining wood means stinky lacquers, rubber gloves, and long drying times? Think again! I'll show you how to stain wood to look weathered and old, with nothing more than household items, and with results achieved in a fraction of the time. Naturally aged wood has a great faded look that ...
By: mikeasaurus

Continue Reading »]]> Tue, 23 Apr 2013 15:40:25 PDT http://www.instructables.com/id/Backyard-Climbing-and-Training-Wall/
Backyard Climbing and Training Wall - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FWQ/UFPE/HFD173PR/FWQUFPEHFD173PR.SQUARE2.jpg http://www.instructables.com/files/deriv/FWQ/UFPE/HFD173PR/FWQUFPEHFD173PR.SQUARE.jpg http://www.instructables.com/files/deriv/FWQ/UFPE/HFD173PR/FWQUFPEHFD173PR.SMALL.jpg Mave_Rick The wall is semi-permanent; meaning that the legs that support the climbing panels can be detached from the base and swing to lay the entire wall flat. While it is very heavy, two people can move it fairly easily.  Design Your design should incorporate everything you want to get out of your trai...
By: Mave_Rick

Continue Reading »]]> Sat, 13 Apr 2013 18:11:41 PDT http://www.instructables.com/id/Building-a-Custom-Rifle-Stock/
Building a Custom Rifle Stock - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F0F/TVD6/GW88L84Z/F0FTVD6GW88L84Z.SQUARE2.jpg http://www.instructables.com/files/deriv/F0F/TVD6/GW88L84Z/F0FTVD6GW88L84Z.SQUARE.jpg http://www.instructables.com/files/deriv/F0F/TVD6/GW88L84Z/F0FTVD6GW88L84Z.SMALL.jpg jwilliamsen Author's Note:  There are concepts in this instructable that go beyond their application to gun stocks - including general woodoworking, sculpting, and finishing - so even if gun stocks aren't your "thing" you may still find something useful here. Introduction: I recently picked up a Russian-made...
By: jwilliamsen

Continue Reading »]]> Thu, 15 Dec 2011 08:56:32 PST http://www.instructables.com/id/Wood-Ring/
Wood Ring - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAQ/F6OU/GP7IH9JC/FAQF6OUGP7IH9JC.SQUARE2.jpg http://www.instructables.com/files/deriv/FAQ/F6OU/GP7IH9JC/FAQF6OUGP7IH9JC.SQUARE.jpg http://www.instructables.com/files/deriv/FAQ/F6OU/GP7IH9JC/FAQF6OUGP7IH9JC.SMALL.jpg delno This instructable will show you how to make a simple wood ring. Materials: -Piece of wood veneer, approximately 6 by 6 inches -Wood glue -Food coloring -Clear nail polish Tools: -Scissors -Drill -Bandsaw -5/8" drill bit -Belt sander or sandpaper Approximate time: 1 to 2 hours of work and about...
By: delno

Continue Reading »]]> Wed, 6 Jul 2011 18:46:45 PDT http://www.instructables.com/id/Make-a-Boomerang-that-actually-comes-back!/
Make a Boomerang that actually comes back! - More DIY How To Projects]]> http://cdn.instructables.com/FS7/94YF/F33IV2YI/FS794YFF33IV2YI.SQUARE2.jpg http://cdn.instructables.com/FS7/94YF/F33IV2YI/FS794YFF33IV2YI.SQUARE.jpg http://cdn.instructables.com/FS7/94YF/F33IV2YI/FS794YFF33IV2YI.SMALL.jpg psfordvt Make a working boomerang! Does it actually work?-Yes! In order for you to be willing to build your own, you probably want some assurance that it will/can work. I teacher engineering in high school and this is a project I do with my classes. If a ninth grader can build a working boomerang so ...
By: psfordvt

Continue Reading »]]> Mon, 18 Jun 2007 22:39:08 PDT http://www.instructables.com/id/How-to-make-a-bowl-from-a-flat-plank/
How to make a bowl from a flat plank - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SQUARE2.jpg http://www.instructables.com/files/deriv/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SQUARE.jpg http://www.instructables.com/files/deriv/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SMALL.jpg Jor2daje This instructable will show how to make a bowl from a single plank of wood, using only a jig saw and wood glue, the bowl could be mounted on a lathe to clean it up but is not necessary. This is a great way to get a nice large bowl from a cheap piece of wood. materials Materials and Tools: -jig ...
By: Jor2daje

Continue Reading »]]> Sun, 4 Jul 2010 21:05:42 PDT http://www.instructables.com/id/Awesome-Cutting-Boards!/
Awesome Cutting Boards! - More DIY How To Projects]]> http://cdn.instructables.com/F27/9553/F11S8SPO/F279553F11S8SPO.SQUARE2.jpg http://cdn.instructables.com/F27/9553/F11S8SPO/F279553F11S8SPO.SQUARE.jpg http://cdn.instructables.com/F27/9553/F11S8SPO/F279553F11S8SPO.SMALL.jpg acantine This Instructable details how to make hardwood cutting boards out of maple and cherry scraps. Not only are they beautiful and high quality, they're made from materials that would have been discarded otherwise. Reduce, Reuse, Recycle! Get your materials For this project, my friend N. graciously p...
By: acantine

Continue Reading »]]> Thu, 3 May 2007 11:30:47 PDT http://www.instructables.com/id/Customized-wooden-heart/
The Illusionist's heart - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FLM/CAB7/H1JUGHD9/FLMCAB7H1JUGHD9.SQUARE2.jpg http://www.instructables.com/files/deriv/FLM/CAB7/H1JUGHD9/FLMCAB7H1JUGHD9.SQUARE.jpg http://www.instructables.com/files/deriv/FLM/CAB7/H1JUGHD9/FLMCAB7H1JUGHD9.SMALL.jpg bricobart You're in love. You like woodworking. You hate to buy industrial-made junk-jewelry. You want to give something personal and special. You don't want to cut your heart out to give it away either. This Instructable is for you! I'll show you how to make a wooden 'cartouche' - just a piece of wood - th...
By: bricobart

Continue Reading »]]> Sat, 28 Apr 2012 04:46:57 PDT http://www.instructables.com/id/How-To-Make-A-Wooden-Pen/
How To Make A Wooden Pen - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F6Y/3VWH/HF243BVA/F6Y3VWHHF243BVA.SQUARE2.jpg http://www.instructables.com/files/deriv/F6Y/3VWH/HF243BVA/F6Y3VWHHF243BVA.SQUARE.jpg http://www.instructables.com/files/deriv/F6Y/3VWH/HF243BVA/F6Y3VWHHF243BVA.SMALL.jpg cerick33 This instructable will show a step by step process in how to make a custom wooden pen.  There are specific tools you will need to complete this project.  You will need: -Pen set -Wood Block -Lathe with a 7mm mandrel -Drill -7mm drill bit -Lathe Chisels -Finishing Wax -Saw -Super Glue -Sand Paper -Hu...
By: cerick33

Continue Reading »]]> Thu, 4 Apr 2013 11:03:54 PDT http://www.instructables.com/id/Bench-Lathe-3-in-1-Lathe-Sander-GrinderSharp/
Bench Lathe 3 in 1 (Lathe - Sander - Grinder/Sharpener) - More DIY How To Projects]]> http://cdn.instructables.com/FXU/2JC2/G8QJNLY2/FXU2JC2G8QJNLY2.SQUARE2.jpg http://cdn.instructables.com/FXU/2JC2/G8QJNLY2/FXU2JC2G8QJNLY2.SQUARE.jpg http://cdn.instructables.com/FXU/2JC2/G8QJNLY2/FXU2JC2G8QJNLY2.SMALL.jpg steliart Introduction:   When I submitted my instructable "The smallest workshop in the world" a lathe latter addition was presented as an add-on idea to the tool bench, after someone asked me... "Where is the lathe?" At first I did a quick sketch lathe idea using a power drill for motor, just to show ...
By: steliart

Continue Reading »]]> Tue, 4 May 2010 04:39:27 PDT http://www.instructables.com/id/Reclaimed-6-drawer-Dresser-TECHSHOP-BUILT/
Reclaimed 6 drawer Dresser (TECHSHOP BUILT)!! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FV5/SJOK/HEI4FNK5/FV5SJOKHEI4FNK5.SQUARE2.jpg http://www.instructables.com/files/deriv/FV5/SJOK/HEI4FNK5/FV5SJOKHEI4FNK5.SQUARE.jpg http://www.instructables.com/files/deriv/FV5/SJOK/HEI4FNK5/FV5SJOKHEI4FNK5.SMALL.jpg kjbills I was asked by a friend to make her a dresser...the only thing that she mentioned is that she wanted it to look old. Old is not that easy for a novice like me, but I said yes, and she gave me a idea of what she was looking for, and I got started. GOOD THING I HAVE A TECH SHOP MEMBERSHIP!!!! ...
By: kjbills

Continue Reading »]]> Thu, 21 Mar 2013 21:30:59 PDT http://www.instructables.com/id/Build-a-Wooden-Horse/
Build a Wooden Horse - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FXL/UH2C/HE7CSHXE/FXLUH2CHE7CSHXE.SQUARE2.jpg http://www.instructables.com/files/deriv/FXL/UH2C/HE7CSHXE/FXLUH2CHE7CSHXE.SQUARE.jpg http://www.instructables.com/files/deriv/FXL/UH2C/HE7CSHXE/FXLUH2CHE7CSHXE.SMALL.jpg fcabezas as the first part of the project we have a render which build. Modeling in Autodesk Inventor in the second part of the horse do the modeling in Autodesk Inventor or AutoCAD. as the third part, we develop the modeling in a 3D modeling program, as inventor or autocad The 3D modeling project wit...
By: fcabezas

Continue Reading »]]> Wed, 13 Mar 2013 20:45:24 PDT http://www.instructables.com/id/Toolbox-Ideas/ http://www.instructables.com/files/deriv/FUH/H8P1/FYTCOUGS/FUHH8P1FYTCOUGS.SQUARE2.jpg http://www.instructables.com/files/deriv/FUH/H8P1/FYTCOUGS/FUHH8P1FYTCOUGS.SQUARE.jpg http://www.instructables.com/files/deriv/FUH/H8P1/FYTCOUGS/FUHH8P1FYTCOUGS.SMALL.jpg 90kar08 I was tired of having all of my tools lying in a pile so I decided to build myself a toolbox to store them in. The foam rubber is excellent for keeping the tools in place, I got it for free from my mom's work they use it to protect expensive devices when shipping them around the world.
By: 90kar08

Continue Reading »]]> Wed, 26 Aug 2009 06:38:44 PDT http://www.instructables.com/id/Made-it-at-TechShop-RDU-How-to-refurbish-an-Old-S/
Made it at TechShop RDU- How to refurbish an Old Skateboard - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FV4/49ZV/HDOW6TU6/FV449ZVHDOW6TU6.SQUARE2.jpg http://www.instructables.com/files/deriv/FV4/49ZV/HDOW6TU6/FV449ZVHDOW6TU6.SQUARE.jpg http://www.instructables.com/files/deriv/FV4/49ZV/HDOW6TU6/FV449ZVHDOW6TU6.SMALL.jpg RaleighBKV This is an Instructable on refurbishing an old skateboard. I did this at TechShop RDU in Raleigh, NC: www.techshop.ws. Also, here's my new Etsy page:  http://www.etsy.com/shop/LeadfootPressings I've had this skateboard since I was a child, and decided recently I was going to teach my dog to pull i...
By: RaleighBKV

Continue Reading »]]> Sun, 3 Mar 2013 15:38:48 PST http://www.instructables.com/id/Build-a-Farmhouse-Table/
Build a Farmhouse Table - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FWH/YXZG/HDP32G3I/FWHYXZGHDP32G3I.SQUARE2.jpg http://www.instructables.com/files/deriv/FWH/YXZG/HDP32G3I/FWHYXZGHDP32G3I.SQUARE.jpg http://www.instructables.com/files/deriv/FWH/YXZG/HDP32G3I/FWHYXZGHDP32G3I.SMALL.jpg kentdvm A farmhouse table has a wonderful aura of warmth and history.  After completing my window seat, I decided to build one.  A table is a relatively simple project and here's how I built mine.   If you are interested in building a window seat, you can read about it here http://www.instructables.com/id...
By: kentdvm

Continue Reading »]]> Mon, 4 Mar 2013 11:58:54 PST http://www.instructables.com/id/I-Made-this-at-TechShop-How-to-Make-a-Wooden-Ring-/
I Made this at TechShop-How to Make a Wooden Ring (Teak) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FP9/QR1N/HD4VNEFJ/FP9QR1NHD4VNEFJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FP9/QR1N/HD4VNEFJ/FP9QR1NHD4VNEFJ.SQUARE.jpg http://www.instructables.com/files/deriv/FP9/QR1N/HD4VNEFJ/FP9QR1NHD4VNEFJ.SMALL.jpg RaleighBKV Take a look at TechShop: http://www.techshop.ws The following is an instructable on making a wooden ring out of teak at Techshop RDU. These rings can be made out of any hardwood, but teak is both water resistant and strong enough to remain intact, even with a slender profile.   Take a look at the ...
By: RaleighBKV

Continue Reading »]]> Mon, 25 Feb 2013 17:31:30 PST http://www.instructables.com/id/How-to-build-an-Eskimohut-in-wood/
How to build a Sami hut in wood! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGW/F5QA/FT7PMA1J/FGWF5QAFT7PMA1J.SQUARE2.jpg http://www.instructables.com/files/deriv/FGW/F5QA/FT7PMA1J/FGWF5QAFT7PMA1J.SQUARE.jpg http://www.instructables.com/files/deriv/FGW/F5QA/FT7PMA1J/FGWF5QAFT7PMA1J.SMALL.jpg Rabarbervin This is a description with pics of how i built my Sami hut in wood. What this hut has as a raw model is the hut that our Swedish indigenous people called Sami, have built and used for many centuries. This type of building is/was also (to some degree) used by the Inuit, Aleut and Yupik peoples. ...
By: Rabarbervin

Continue Reading »]]> Fri, 10 Apr 2009 09:24:38 PDT http://www.instructables.com/id/Ebonizing-Wood-Study/
Ebonizing Wood Study - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FM9/PS22/HD4VPYWW/FM9PS22HD4VPYWW.SQUARE2.jpg http://www.instructables.com/files/deriv/FM9/PS22/HD4VPYWW/FM9PS22HD4VPYWW.SQUARE.jpg http://www.instructables.com/files/deriv/FM9/PS22/HD4VPYWW/FM9PS22HD4VPYWW.SMALL.jpg nyx702 I have been scouring the internet looking for the best and cheapest way to ebonize wood. If you are not familiar with this term it's basically staining wood a deep dark opaque black. You are trying to simulate the real ebony wood only at a fraction of the cost. There are a variety of ways to do this...
By: nyx702

Continue Reading »]]> Wed, 20 Feb 2013 22:31:29 PST http://www.instructables.com/id/Make-adjustable-feet-for-a-butcher-block-Made-at/
Make adjustable feet for a butcher block - Made at Techshop - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTY/DLLE/HD4VO9FF/FTYDLLEHD4VO9FF.SQUARE2.jpg http://www.instructables.com/files/deriv/FTY/DLLE/HD4VO9FF/FTYDLLEHD4VO9FF.SQUARE.jpg http://www.instructables.com/files/deriv/FTY/DLLE/HD4VO9FF/FTYDLLEHD4VO9FF.SMALL.jpg workislove Someone I know recently commisioned a cutting board from me - as described in my earlier instructable how to make an end grain cutting board. But instead of making a normal size cutting board, they wanted a full-on butcher block, and I decided that instead of just being a solid block, it needed some...
By: workislove

Continue Reading »]]> Thu, 14 Feb 2013 02:55:23 PST http://www.instructables.com/id/Simple-Stylish-Toddler-Bed-for-Under-40/
Simple & Stylish Toddler Bed for Under $40 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F6Y/CPDH/HD2RTUZY/F6YCPDHHD2RTUZY.SQUARE2.jpg http://www.instructables.com/files/deriv/F6Y/CPDH/HD2RTUZY/F6YCPDHHD2RTUZY.SQUARE.jpg http://www.instructables.com/files/deriv/F6Y/CPDH/HD2RTUZY/F6YCPDHHD2RTUZY.SMALL.jpg tjesse As a parent, I am constantly learning new things about my daughter’s likes and dislikes. I recently learned that her all-in-one bed is pointless if she will not sleep in it. It was supposed to transform with the growing needs of our child, but try telling her that. Our original toddler bed is just a...
By: tjesse

Continue Reading »]]> Tue, 12 Feb 2013 09:55:23 PST http://www.instructables.com/id/How-To-Make-A-Bullroarer/
How To Make A Bullroarer - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FSH/E2CS/HCV92AFB/FSHE2CSHCV92AFB.SQUARE2.jpg http://www.instructables.com/files/deriv/FSH/E2CS/HCV92AFB/FSHE2CSHCV92AFB.SQUARE.jpg http://www.instructables.com/files/deriv/FSH/E2CS/HCV92AFB/FSHE2CSHCV92AFB.SMALL.jpg cap n crunch Bullroarers are a ceremonial noisemaker, toy and signaling device. They are native to many parts of the world, including Australia, Scandinavia, Mali, the British Isles, and all over the Americas. Bullroarers make a distinct, low-pitched sound that can travel for long distances. Above all, they are ...
By: cap n crunch

Continue Reading »]]> Tue, 12 Feb 2013 12:24:52 PST http://www.instructables.com/id/iHeart-Wood-iPad-case-100-salvage-materials/
iHeart Wood iPad case (100% salvage materials) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FX5/D41T/HCV8NKMC/FX5D41THCV8NKMC.SQUARE2.jpg http://www.instructables.com/files/deriv/FX5/D41T/HCV8NKMC/FX5D41THCV8NKMC.SQUARE.jpg http://www.instructables.com/files/deriv/FX5/D41T/HCV8NKMC/FX5D41THCV8NKMC.SMALL.jpg east fork spring My dad, awesome dad that he is, bought me an iPad last Christmas. When I went scouting for an iPad cover, I found only a few that suited my personality and zero that suited my pocketbook. So off to the shop I went. When I returned, this is what I had. It's working out just fine. Note: every stitch ...
By: east fork spring

Continue Reading »]]> Sun, 10 Feb 2013 19:20:54 PST http://www.instructables.com/id/The-illusionist-heart-locket/
The illusionist heart locket - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F7D/GF96/HCV8TZ8A/F7DGF96HCV8TZ8A.SQUARE2.jpg http://www.instructables.com/files/deriv/F7D/GF96/HCV8TZ8A/F7DGF96HCV8TZ8A.SQUARE.jpg http://www.instructables.com/files/deriv/F7D/GF96/HCV8TZ8A/F7DGF96HCV8TZ8A.SMALL.jpg Flecks This is my approach at the illusionist heart locket, as a gift for my girlfriend. Many have already made attempts at this, and you can find some here on instructables, and even more on Google, but this one is made completely by me, i have designed and made every single piece of it myself. Because i ...
By: Flecks

Continue Reading »]]> Sun, 10 Feb 2013 03:50:57 PST http://www.instructables.com/id/Jewelry-Box/
Jewelry Box - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FQC/R1IJ/HCV91PCL/FQCR1IJHCV91PCL.SQUARE2.jpg http://www.instructables.com/files/deriv/FQC/R1IJ/HCV91PCL/FQCR1IJHCV91PCL.SQUARE.jpg http://www.instructables.com/files/deriv/FQC/R1IJ/HCV91PCL/FQCR1IJHCV91PCL.SMALL.jpg cgapay I created this jewelry box as a gift for a friend.  It has a clear top to display pictures through the lid. Sides were cut to desired length.  Rounding the sides required the blade to be at a 45 degree angle with a guide setup with clamps on the table saw, also at 45 degrees.   A cardboard t...
By: cgapay

Continue Reading »]]> Sat, 9 Feb 2013 08:06:49 PST http://www.instructables.com/id/Roubo-Style-Workbench/
Roubo-Style Workbench - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F88/5ZJR/HCRVRD5G/F885ZJRHCRVRD5G.SQUARE2.jpg http://www.instructables.com/files/deriv/F88/5ZJR/HCRVRD5G/F885ZJRHCRVRD5G.SQUARE.jpg http://www.instructables.com/files/deriv/F88/5ZJR/HCRVRD5G/F885ZJRHCRVRD5G.SMALL.jpg Scotttland   This is going to be less of a step-by-step tutorial and more a series of tips and a review of what I learned making my workbench.      After examining many, many workbench designs and almost settling on a German-style bench, I came across the 17th century French workbench of Andre Roubo.  This des...
By: Scotttland

Continue Reading »]]> Tue, 5 Feb 2013 17:04:05 PST http://www.instructables.com/id/Stack-O-Books-Box/
Stack O' Books Box - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FCY/LAJJ/HCB8KNWM/FCYLAJJHCB8KNWM.SQUARE2.jpg http://www.instructables.com/files/deriv/FCY/LAJJ/HCB8KNWM/FCYLAJJHCB8KNWM.SQUARE.jpg http://www.instructables.com/files/deriv/FCY/LAJJ/HCB8KNWM/FCYLAJJHCB8KNWM.SMALL.jpg BigMrTree Not just another box made of books!! This one has style, this one has class... and it hides your stuff!! I was inspired for this project by some of the other Book Boxes here on Instructables, http://www.instructables.com/id/Book-Safe/?ALLSTEPS http://www.instructables.com/id/power-book/?ALLSTEPS  h...
By: BigMrTree

Continue Reading »]]> Sun, 27 Jan 2013 02:56:32 PST http://www.instructables.com/id/Glass-fill-epoxy-top-round-bar-table/ http://www.instructables.com/files/deriv/FNQ/K3QW/HC9M6EBI/FNQK3QWHC9M6EBI.SQUARE2.jpg http://www.instructables.com/files/deriv/FNQ/K3QW/HC9M6EBI/FNQK3QWHC9M6EBI.SQUARE.jpg http://www.instructables.com/files/deriv/FNQ/K3QW/HC9M6EBI/FNQK3QWHC9M6EBI.SMALL.jpg NelsonStudios I made this for my brother's Seattle wine-bar, the Poco Wine Room as a 'congratulations on your dream' gift.  The process was involved but the results were absolutely worth it!  The top (and it's identical mate) was teamed with the bases of his existing laminate bar tables.  Pressboard was gone and ...
By: NelsonStudios

Continue Reading »]]> Tue, 22 Jan 2013 17:18:52 PST http://www.instructables.com/id/Quick-Sides-for-Small-Utility-Trailer/
Quick Sides for Small Utility Trailer - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FLV/ZOUN/HBUZGOJW/FLVZOUNHBUZGOJW.SQUARE2.jpg http://www.instructables.com/files/deriv/FLV/ZOUN/HBUZGOJW/FLVZOUNHBUZGOJW.SQUARE.jpg http://www.instructables.com/files/deriv/FLV/ZOUN/HBUZGOJW/FLVZOUNHBUZGOJW.SMALL.jpg caldersdad This method of constructing solid, wooden sides for a small utility trailer uses a minimum of materials and requires only an hour or two for assembly. We found all these materials on hand in the shop. This concept may be adapted for trailers of other sizes or where other materials are available for ...
By: caldersdad

Continue Reading »]]> Sun, 13 Jan 2013 20:18:48 PST http://www.instructables.com/id/Olmo-Desk/ http://www.instructables.com/files/deriv/F5P/KHOE/HBUZES2U/F5PKHOEHBUZES2U.SQUARE2.jpg http://www.instructables.com/files/deriv/F5P/KHOE/HBUZES2U/F5PKHOEHBUZES2U.SQUARE.jpg http://www.instructables.com/files/deriv/F5P/KHOE/HBUZES2U/F5PKHOEHBUZES2U.SMALL.jpg Anto.does Olmo desk is a table thinked for designers and architects who works in small places. Inspired by the Chinese boxes. The 1:5 scale model is totally handmade. Model dimensions: 12cm x 26 cm x 16 cm. Enjoy! 
By: Anto.does

Continue Reading »]]> Mon, 14 Jan 2013 14:03:19 PST http://www.instructables.com/id/Forcibly-Aging-Wood/
Forcibly Aging Wood - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZB/KJKE/HC3PTE14/FZBKJKEHC3PTE14.SQUARE2.jpg http://www.instructables.com/files/deriv/FZB/KJKE/HC3PTE14/FZBKJKEHC3PTE14.SQUARE.jpg http://www.instructables.com/files/deriv/FZB/KJKE/HC3PTE14/FZBKJKEHC3PTE14.SMALL.jpg Justin Tyler Tate Do you like the look of old, weathered wood but just don't have the 10 years to wait? Do it quickly with simple household items; don't wait, do it now! Ingredients: - Black Tea - Vinegar - A brush - some steel (steel wool, old rusty nails....) (*the comic above is awful) Mix yourself a Rusty Na...
By: Justin Tyler Tate

Continue Reading »]]> Tue, 8 Jan 2013 02:18:35 PST http://www.instructables.com/id/A-Small-Circle-Center-Finder-Drawing-Aid/
A Small Circle Center Finder & Drawing Aid - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FQY/C0XJ/HBFFJKQU/FQYC0XJHBFFJKQU.SQUARE2.jpg http://www.instructables.com/files/deriv/FQY/C0XJ/HBFFJKQU/FQYC0XJHBFFJKQU.SQUARE.jpg http://www.instructables.com/files/deriv/FQY/C0XJ/HBFFJKQU/FQYC0XJHBFFJKQU.SMALL.jpg bgerens I wanted to see what the largest diameter circle I could get from an irregular shaped small piece of wood. There are templates available for finding the center of log sections and locating the center point, but I was working with small stock. I made this center finder/drawing aid at the TechShop, ww...
By: bgerens

Continue Reading »]]> Sat, 5 Jan 2013 20:35:04 PST http://www.instructables.com/id/Turning-Wooden-Nutcrackers-from-blanks/
Turning Wooden Nutcrackers from blanks - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FHM/CGVX/HAUNM0LV/FHMCGVXHAUNM0LV.SQUARE2.jpg http://www.instructables.com/files/deriv/FHM/CGVX/HAUNM0LV/FHMCGVXHAUNM0LV.SQUARE.jpg http://www.instructables.com/files/deriv/FHM/CGVX/HAUNM0LV/FHMCGVXHAUNM0LV.SMALL.jpg tstan1136 I wanted to make some cool nutcrackers for Christmas, but couldn't find anything resembling free instructions! Most plans are in books or plans you buy online.  So, I did alot of guesswork and research, and came up with a pretty easy way to assemble em ( labor intensive though) I've got pictures of...
By: tstan1136

Continue Reading »]]> Thu, 3 Jan 2013 13:13:13 PST http://www.instructables.com/id/How-to-make-Cooking-Spoons/
How to make Cooking Spoons - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FB2/H8NK/HAUNN3EZ/FB2H8NKHAUNN3EZ.SQUARE2.jpg http://www.instructables.com/files/deriv/FB2/H8NK/HAUNN3EZ/FB2H8NKHAUNN3EZ.SQUARE.jpg http://www.instructables.com/files/deriv/FB2/H8NK/HAUNN3EZ/FB2H8NKHAUNN3EZ.SMALL.jpg Sam DeRose This post shows how to make multipurpose wooden cooking spoons on a lathe. I wanted to make my mom something for Christmas, and I also wanted an excuse to learn how to use a wood lathe, so I made some cooking spoons out of walnut. *I decided to make three spoons, two 10", and one heavy duty 14".  ...
By: Sam DeRose

Continue Reading »]]> Sun, 30 Dec 2012 11:13:09 PST http://www.instructables.com/id/Scrap-Wood-Cutting-Board-2/ http://www.instructables.com/files/deriv/FIC/4EV9/HAWSHZD7/FIC4EV9HAWSHZD7.SQUARE2.jpg http://www.instructables.com/files/deriv/FIC/4EV9/HAWSHZD7/FIC4EV9HAWSHZD7.SQUARE.jpg http://www.instructables.com/files/deriv/FIC/4EV9/HAWSHZD7/FIC4EV9HAWSHZD7.SMALL.jpg Sam DeRose If you do a lot of woodworking and hate wasting scrap material, this is a great project for you. This cutting board can be made out of any scrap hardwood, and no matter what it looks beautiful and is always unique. Also, since you already paid for the wood and assumed you'd be wasting some, this cut...
By: Sam DeRose

Continue Reading »]]> Thu, 27 Dec 2012 22:03:25 PST http://www.instructables.com/id/Key-Shaped-Key-Hanger/
Key-Shaped Key Hanger - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTK/KPUY/HAUNMU9Z/FTKKPUYHAUNMU9Z.SQUARE2.jpg http://www.instructables.com/files/deriv/FTK/KPUY/HAUNMU9Z/FTKKPUYHAUNMU9Z.SQUARE.jpg http://www.instructables.com/files/deriv/FTK/KPUY/HAUNMU9Z/FTKKPUYHAUNMU9Z.SMALL.jpg guyzo35 My friend Steve requested a key-shaped key hanger for Christmas, (and I finished it just in the nick of time).  It's a fairly easy project if you have a drill-press and scroll/band saw.  Total cost of the project was $1.73 for the key hanger hooks from the local hardware store.   I always have a wi...
By: guyzo35

Continue Reading »]]> Mon, 24 Dec 2012 22:35:40 PST http://www.instructables.com/id/Bandsaw-Taxidermy/
Bandsaw Taxidermy - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FYZ/8W10/H0URBYDP/FYZ8W10H0URBYDP.SQUARE2.jpg http://www.instructables.com/files/deriv/FYZ/8W10/H0URBYDP/FYZ8W10H0URBYDP.SQUARE.jpg http://www.instructables.com/files/deriv/FYZ/8W10/H0URBYDP/FYZ8W10H0URBYDP.SMALL.jpg wholman I am not a hunter, in the literal sense; more of an alley walker, stalking dumpsters and backyard scrap heaps for promising prey, old wood, discarded appliances, mint-condition cardboard.  My trophies are oft-unappreciated, fading into the background of my apartment.  No longer.  Here is a way for u...
By: wholman

Continue Reading »]]> Wed, 11 Apr 2012 19:21:48 PDT http://www.instructables.com/id/Homemade-tobacco-pipe/
Homemade tobacco pipe - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F8Q/E55O/FGAGY92P/F8QE55OFGAGY92P.SQUARE2.jpg http://www.instructables.com/files/deriv/F8Q/E55O/FGAGY92P/F8QE55OFGAGY92P.SQUARE.jpg http://www.instructables.com/files/deriv/F8Q/E55O/FGAGY92P/F8QE55OFGAGY92P.SMALL.jpg SimonRuben This Instructable is about how to make your own tobacco pipes at home. I didn't want to spend a lot of money for a tobacco pipe, so I decided to make one myself. Here is how I did just that. You will need... What you will need to make your own tobacco pipe: - 1 Block of Bruyere wood - 1 ferule -...
By: SimonRuben

Continue Reading »]]> Sun, 18 May 2008 03:49:33 PDT http://www.instructables.com/id/How-to-Prepare-Reclaimed-Wood/
How to Prepare Reclaimed Wood - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FKN/WFOY/HAQ37RGA/FKNWFOYHAQ37RGA.SQUARE2.jpg http://www.instructables.com/files/deriv/FKN/WFOY/HAQ37RGA/FKNWFOYHAQ37RGA.SQUARE.jpg http://www.instructables.com/files/deriv/FKN/WFOY/HAQ37RGA/FKNWFOYHAQ37RGA.SMALL.jpg Groovy Green Gal I bought some wood off of craigslist. The fellow said it was redwood from a barn. I decided to restore it rather than using it with the aged look.  The Instructable will describe how I went through the process of getting the wood ready to plane using the planer/jointer at TechShop. What you will ne...
By: Groovy Green Gal

Continue Reading »]]> Thu, 20 Dec 2012 16:02:05 PST http://www.instructables.com/id/Classic-Toy-Car/
Classic Toy Car - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1J/UHUV/HAQ37HEW/F1JUHUVHAQ37HEW.SQUARE2.jpg http://www.instructables.com/files/deriv/F1J/UHUV/HAQ37HEW/F1JUHUVHAQ37HEW.SQUARE.jpg http://www.instructables.com/files/deriv/F1J/UHUV/HAQ37HEW/F1JUHUVHAQ37HEW.SMALL.jpg JamesRPatrick This project was inspired by MAKE Magazine's Fast Toy Wood Car article. Make's car uses layers of laser-cut plywood to form the body of their car. I liked the idea but wanted something more durable, something that would last generations of abuse, or at least a few hand-me-downs. My solution is...
By: JamesRPatrick

Continue Reading »]]> Tue, 18 Dec 2012 21:19:46 PST http://www.instructables.com/id/How-to-make-a-REAL-homemade-bow/
How to make a REAL homemade bow - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FT9/758C/F9056VT2/FT9758CF9056VT2.SQUARE2.jpg http://www.instructables.com/files/deriv/FT9/758C/F9056VT2/FT9758CF9056VT2.SQUARE.jpg http://www.instructables.com/files/deriv/FT9/758C/F9056VT2/FT9758CF9056VT2.SMALL.jpg homebowyerboy I admit now that this instructable was pretty trashy, so i'm gonna make a good english longbow instructable in a couple days. Materials The materials list is as follows: 1.A long, straight stick about your height. Not bigger than about an inch and a half in diameter and preferably with as ...
By: homebowyerboy

Continue Reading »]]> Mon, 19 Nov 2007 11:04:12 PST http://www.instructables.com/id/Easiest-way-to-make-octagons-for-wood-turning-NO-/
Easiest way to make octagons for wood turning. NO MATH OR MARKING! YAYY! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAC/EYKA/HAM7L50U/FACEYKAHAM7L50U.SQUARE2.jpg http://www.instructables.com/files/deriv/FAC/EYKA/HAM7L50U/FACEYKAHAM7L50U.SQUARE.jpg http://www.instructables.com/files/deriv/FAC/EYKA/HAM7L50U/FACEYKAHAM7L50U.SMALL.jpg tstan1136 To turn a long piece of square wood into a shapely cylinder on the wood lathe, first your going to have to chop off the corners and turn it into an OCTAGON.  Now, I remember most of my high school trig and know a few ways of marking off corners and measuring to get that perfect octagon from a square...
By: tstan1136

Continue Reading »]]> Wed, 12 Dec 2012 10:48:54 PST http://www.instructables.com/id/Improved-Wooden-Toolbox-A-new-take-on-a-classic/
Improved Wooden Toolbox - A new take on a classic - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FT9/LST7/HA4M4JUH/FT9LST7HA4M4JUH.SQUARE2.jpg http://www.instructables.com/files/deriv/FT9/LST7/HA4M4JUH/FT9LST7HA4M4JUH.SQUARE.jpg http://www.instructables.com/files/deriv/FT9/LST7/HA4M4JUH/FT9LST7HA4M4JUH.SMALL.jpg bpoundah I wanted to create toolbox that was strong, easy to build, cheap to produce and also had some style. But more than that, I wanted to use recycled materials and for the design to be different enough in a simple and functional way. I feel like I succeeded. There are quite a few tool boxes/totes whic...
By: bpoundah

Continue Reading »]]> Sat, 8 Dec 2012 21:36:39 PST http://www.instructables.com/id/Key-Turner-For-people-with-arthiritis/
Key Turner (For people with arthiritis) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F15/AWIV/GHFK7HYF/F15AWIVGHFK7HYF.SQUARE2.jpg http://www.instructables.com/files/deriv/F15/AWIV/GHFK7HYF/F15AWIVGHFK7HYF.SQUARE.jpg http://www.instructables.com/files/deriv/F15/AWIV/GHFK7HYF/F15AWIVGHFK7HYF.SMALL.jpg fullmetalzzero I designed this key turner especial for people that have arthirits or have a hard time turning keys. It's a simple design made of wood band it helps tremendously in reducing the amount of torque needed to turn a key along with providing a greater surface area to hold on to. If there is anything...
By: fullmetalzzero

Continue Reading »]]> Sun, 12 Dec 2010 19:18:58 PST http://www.instructables.com/id/EASY-SET-OF-3-CANDLEHOLDERS-Little-Houses/
EASY SET OF 3 CANDLEHOLDERS (Little Houses) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FHQ/XR76/HAQ2YRJR/FHQXR76HAQ2YRJR.SQUARE2.jpg http://www.instructables.com/files/deriv/FHQ/XR76/HAQ2YRJR/FHQXR76HAQ2YRJR.SQUARE.jpg http://www.instructables.com/files/deriv/FHQ/XR76/HAQ2YRJR/FHQXR76HAQ2YRJR.SMALL.jpg Few Bits A friend of mine sent me a photo of 3 house shaped candleholders and I immediately thought, "Holiday gifts!"  You could finish these in a weekend, with very minimal costs. WHAT YOU WILL NEED: (this list will give you 8 sets) 1 6' 4x4 pine board Measuring tape Pencil Ruler Combination square (not ab...
By: Few Bits

Continue Reading »]]> Thu, 6 Dec 2012 14:15:04 PST