Instructables: exploring - workshop - woodworking - workshop - featured http://www.instructables.com Fri, 29 Jul 2016 05:14:37 PDT BLOX v1.01 DIY From Dog House to Chicken Coop http://www.instructables.com/id/DIY-From-Dog-House-to-Chicken-Coop/
DIY From Dog House to Chicken Coop - More DIY How To Projects]]> http://cdn.instructables.com/FIF/20AR/IQ6WTGR6/FIF20ARIQ6WTGR6.SQUARE2.jpg http://cdn.instructables.com/FIF/20AR/IQ6WTGR6/FIF20ARIQ6WTGR6.SQUARE.jpg http://cdn.instructables.com/FIF/20AR/IQ6WTGR6/FIF20ARIQ6WTGR6.SMALL.jpg 1775 Hi there, thanks for checking out my Instructable!Today I will show you how my girlfriend and I converted an old dog house into a chicken coop. First, a little backstory: My girlfriend has been talking about getting two or three chickens for quite some time, but we have never followed through with i...
By: 1775

Continue Reading »]]>
Sun, 3 Jul 2016 18:35:37 PDT
How to Make a Coffin http://www.instructables.com/id/How-to-Make-a-Coffin/
How to Make a Coffin - More DIY How To Projects]]> http://cdn.instructables.com/FIZ/L3JY/IQ2KDXGQ/FIZL3JYIQ2KDXGQ.SQUARE2.jpg http://cdn.instructables.com/FIZ/L3JY/IQ2KDXGQ/FIZL3JYIQ2KDXGQ.SQUARE.jpg http://cdn.instructables.com/FIZ/L3JY/IQ2KDXGQ/FIZL3JYIQ2KDXGQ.SMALL.jpg Wood Review Story and photos by Stephen OramReprinted from Australian Wood Review, issue 56, September 2007When one is commissioned to make a piece there is usually an arbitrary deadline set as part of the deal—Christmas, birthdays, business premises opening... But recently I came close to a true deadline wh...
By: Wood Review

Continue Reading »]]>
Thu, 30 Jun 2016 18:51:13 PDT
Drum Sanding Table for the Drill Press http://www.instructables.com/id/Drum-Sanding-Table-for-the-Drill-Press/
Drum Sanding Table for the Drill Press - More DIY How To Projects]]> http://cdn.instructables.com/F8S/XI4J/IQ171GBN/F8SXI4JIQ171GBN.SQUARE2.jpg http://cdn.instructables.com/F8S/XI4J/IQ171GBN/F8SXI4JIQ171GBN.SQUARE.jpg http://cdn.instructables.com/F8S/XI4J/IQ171GBN/F8SXI4JIQ171GBN.SMALL.jpg Dominic Bender A sanding drum is a handy addition to any drill press. Here I show you how I built my easy to use drum sanding table with dust extraction and thickness sanding feature. Like so many other things I believe this has been done before, but maybe the way I did it - as simple and easy as possible - will b...
By: Dominic Bender

Continue Reading »]]>
Wed, 29 Jun 2016 15:31:19 PDT
Sandpaper Disc Storage Rack http://www.instructables.com/id/Sandpaper-Disc-Storage-Rack/
Sandpaper Disc Storage Rack - More DIY How To Projects]]> http://cdn.instructables.com/FC4/1A5C/IPZMLH93/FC41A5CIPZMLH93.SQUARE2.jpg http://cdn.instructables.com/FC4/1A5C/IPZMLH93/FC41A5CIPZMLH93.SQUARE.jpg http://cdn.instructables.com/FC4/1A5C/IPZMLH93/FC41A5CIPZMLH93.SMALL.jpg fixthisbuildthat This Sandpaper Disc Storage Rack is a very quick build and will tame all those errant sanding discs laying around your shop. With storage for your sander on the top, it's a great way to get some organization for the sanding gear and paper in your shop.Tools (Affiliate Links):Pocket Hole JigRight Ang...
By: fixthisbuildthat

Continue Reading »]]>
Tue, 28 Jun 2016 18:34:35 PDT
Off-surface Shelf http://www.instructables.com/id/Off-surface-Shelf/
Off-surface Shelf - More DIY How To Projects]]> http://cdn.instructables.com/FLF/QB5T/IP74QUNM/FLFQB5TIP74QUNM.SQUARE2.jpg http://cdn.instructables.com/FLF/QB5T/IP74QUNM/FLFQB5TIP74QUNM.SQUARE.jpg http://cdn.instructables.com/FLF/QB5T/IP74QUNM/FLFQB5TIP74QUNM.SMALL.jpg FABLAB Dhahran Hi everyone, here's another fun easy to make project. In this project we will be making a small useful off-surface shelf with our own touch. All we need is a basic 2D designing skills. So, lets get started. Requirement For this project all we need is : 1- Plywood. ( I used 8mm thickness) 2- Sand...
By: FABLAB Dhahran

Continue Reading »]]>
Thu, 9 Jun 2016 03:44:35 PDT
Flattening a Slab on my Bench with a Router http://www.instructables.com/id/Flattening-a-Slab-on-My-Bench-With-a-Router/
Flattening a Slab on my Bench with a Router - More DIY How To Projects]]> http://cdn.instructables.com/F63/KFU7/IOVPRP3T/F63KFU7IOVPRP3T.SQUARE2.jpg http://cdn.instructables.com/F63/KFU7/IOVPRP3T/F63KFU7IOVPRP3T.SQUARE.jpg http://cdn.instructables.com/F63/KFU7/IOVPRP3T/F63KFU7IOVPRP3T.SMALL.jpg Charlie Kocourek I had a very nice slab that I wanted to make into a coffee table. I flattened this slab right on my workbench! I am happy to say that flattening a slab of wood with a router was even easier that I thought it would be! Not only was it easy, but the results were great! Make a simple jig to hold the...
By: Charlie Kocourek

Continue Reading »]]>
Wed, 1 Jun 2016 17:01:31 PDT
How to Make a Box http://www.instructables.com/id/How-to-Make-a-Box/
How to Make a Box - More DIY How To Projects]]> http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SQUARE2.jpg http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SQUARE.jpg http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SMALL.jpg Wood Review Words and photos: Leo SadlekThe challenge to design a piece from a single board of timber is, at first glance, quite different from the usual design brief. It is rare for a client to give me a piece of timber with a request involving nothing more than can I please make something from it. Usually ...
By: Wood Review

Continue Reading »]]>
Mon, 23 May 2016 23:27:31 PDT
Featured Author: Kludge77 http://www.instructables.com/id/Featured-Author-Kludge77/ http://cdn.instructables.com/F7T/Q03U/INU1G1J4/F7TQ03UINU1G1J4.SQUARE2.jpg http://cdn.instructables.com/F7T/Q03U/INU1G1J4/F7TQ03UINU1G1J4.SQUARE.jpg http://cdn.instructables.com/F7T/Q03U/INU1G1J4/F7TQ03UINU1G1J4.SMALL.jpg tomatoskins Peter Brown, better known on Instructables as Kludge77, is a woodworker and self-proclaimed “computer geek." He originally joined Instructables on a whim, posting a project and YouTube video here and there. After picking up followers and winning contests, he has become one of our regular authors....
By: tomatoskins

Continue Reading »]]>
Fri, 6 May 2016 13:36:36 PDT
Rocket Ship, DIY Home Decor / Toy http://www.instructables.com/id/Rocket-Ship-DIY-Home-Decor-Toy/
Rocket Ship, DIY Home Decor / Toy - More DIY How To Projects]]> http://cdn.instructables.com/FC1/BD16/INUV0OPV/FC1BD16INUV0OPV.SQUARE2.jpg http://cdn.instructables.com/FC1/BD16/INUV0OPV/FC1BD16INUV0OPV.SQUARE.jpg http://cdn.instructables.com/FC1/BD16/INUV0OPV/FC1BD16INUV0OPV.SMALL.jpg Liberty Woodworking This is a fun idea I came up with for some home decor ideas I was thinking about and thought of a simple rocket ship just to have in the room as part of the decor on a book shelf or fire place mantle. I have my youtube channel called Liberty Woodworking where I do some DIY projects all the time and ...
By: Liberty Woodworking

Continue Reading »]]>
Thu, 5 May 2016 16:05:23 PDT
Wood Veneer Rose http://www.instructables.com/id/Wood-Veneer-Rose/
Wood Veneer Rose - More DIY How To Projects]]> http://cdn.instructables.com/FF4/3561/INKJMCX4/FF43561INKJMCX4.SQUARE2.jpg http://cdn.instructables.com/FF4/3561/INKJMCX4/FF43561INKJMCX4.SQUARE.jpg http://cdn.instructables.com/FF4/3561/INKJMCX4/FF43561INKJMCX4.SMALL.jpg geekbuilders This project works well as a gift for valentines, mother's day, or for a special loved one. It takes some patience, but yields a beautiful result. you can also watch a video of the rose being made along with the steps outlined here. Enjoy! Create the Form The first step in the process is to creat...
By: geekbuilders

Continue Reading »]]>
Wed, 20 Apr 2016 22:21:46 PDT
Make an eggbox http://www.instructables.com/id/Make-an-Eggbox/
Make an eggbox - More DIY How To Projects]]> http://cdn.instructables.com/FNL/4YUE/IM80SKRU/FNL4YUEIM80SKRU.SQUARE2.jpg http://cdn.instructables.com/FNL/4YUE/IM80SKRU/FNL4YUEIM80SKRU.SQUARE.jpg http://cdn.instructables.com/FNL/4YUE/IM80SKRU/FNL4YUEIM80SKRU.SMALL.jpg Amaries “It’s springtime, the season when eggs traditionally get their moment of glory” so I made an eggbox. I hope you get inspired and if you don’t want to make an egg you can always eat one. How it got started I turned this egg last week and found the result pretty boring. I wanted it to paint the egg...
By: Amaries

Continue Reading »]]>
Fri, 25 Mar 2016 15:00:53 PDT
Portable Workshop http://www.instructables.com/id/Portable-Workshop/
Portable Workshop - More DIY How To Projects]]> http://cdn.instructables.com/FC0/29K4/IL5J6YJK/FC029K4IL5J6YJK.SQUARE2.jpg http://cdn.instructables.com/FC0/29K4/IL5J6YJK/FC029K4IL5J6YJK.SQUARE.jpg http://cdn.instructables.com/FC0/29K4/IL5J6YJK/FC029K4IL5J6YJK.SMALL.jpg Paoson Woodwork A Portable Workshop for those of you that don't have much space or a compact cabinet you can carry all your stuff to work in other locations.I wanted it to keep it as small as possible for those of you that don't have much space or your car and tools share the same place. It has wheels so it can be ...
By: Paoson Woodwork

Continue Reading »]]>
Fri, 26 Feb 2016 16:15:37 PST
American Patriot Pen http://www.instructables.com/id/American-Patriot-Pen/
American Patriot Pen - More DIY How To Projects]]> http://cdn.instructables.com/FYF/S49B/IL17PVEH/FYFS49BIL17PVEH.SQUARE2.jpg http://cdn.instructables.com/FYF/S49B/IL17PVEH/FYFS49BIL17PVEH.SQUARE.jpg http://cdn.instructables.com/FYF/S49B/IL17PVEH/FYFS49BIL17PVEH.SMALL.jpg HPandLOTR I turned this slimline pen from stars and stripes blanks and I'll show you how I did it. Cutting and Drilling your Blanks I purchased a stars blank and a stripes blank from Packard Woodworks (though you can buy them at a lot of other woodturning stores). I also bought a chrome fancy slimline pen...
By: HPandLOTR

Continue Reading »]]>
Wed, 24 Feb 2016 19:03:14 PST
Organize Your Shop with French Cleat Tool Storage http://www.instructables.com/id/Organize-Your-Shop-With-French-Cleat-Tool-Storage/
Organize Your Shop with French Cleat Tool Storage - More DIY How To Projects]]> http://cdn.instructables.com/FPJ/7VYA/IKLFQLKL/FPJ7VYAIKLFQLKL.SQUARE2.jpg http://cdn.instructables.com/FPJ/7VYA/IKLFQLKL/FPJ7VYAIKLFQLKL.SQUARE.jpg http://cdn.instructables.com/FPJ/7VYA/IKLFQLKL/FPJ7VYAIKLFQLKL.SMALL.jpg fixthisbuildthat If you liked the video please subscribe to my YouTube channel.I have a French Cleat Tool Storage System in my shop that makes moving all my tool storage items super easy when I want to reconfigure things. I have dedicated plans for all the items you see in the picture over at FixThisBuildThat.com. ...
By: fixthisbuildthat

Continue Reading »]]>
Sat, 13 Feb 2016 20:07:38 PST
Fold Down Work Table for X-Carve CNC Machine http://www.instructables.com/id/Fold-Down-Work-Table-for-X-Carve-CNC-Machine/
Fold Down Work Table for X-Carve CNC Machine - More DIY How To Projects]]> http://cdn.instructables.com/FRD/J4GQ/IJ0EERF7/FRDJ4GQIJ0EERF7.SQUARE2.jpg http://cdn.instructables.com/FRD/J4GQ/IJ0EERF7/FRDJ4GQIJ0EERF7.SQUARE.jpg http://cdn.instructables.com/FRD/J4GQ/IJ0EERF7/FRDJ4GQIJ0EERF7.SMALL.jpg AverageJoesJoinery I love making things, as I'm sure you do too. My work space is small though, just a 12ft x 8ft shed. I have to make the most of the space I have so I designed this fold down table to house my X-Carve CNC machine.If you would like to watch me make it, I have a video on my YouTube channel here: Materi...
By: AverageJoesJoinery

Continue Reading »]]>
Mon, 4 Jan 2016 13:51:00 PST
More than just a lumber cart http://www.instructables.com/id/More-Than-Just-a-Lumber-Cart/
More than just a lumber cart - More DIY How To Projects]]> http://cdn.instructables.com/FFA/WKJR/IICCRRLU/FFAWKJRIICCRRLU.SQUARE2.jpg http://cdn.instructables.com/FFA/WKJR/IICCRRLU/FFAWKJRIICCRRLU.SQUARE.jpg http://cdn.instructables.com/FFA/WKJR/IICCRRLU/FFAWKJRIICCRRLU.SMALL.jpg Moy perez woodshop A mobil cart to hold anything from small cutoffs to larger pieces of lumber. It also includes plenty of storage drawers and a clamp rack. Tools needed and materials Tools needed*Mitersaw or circular saw*Reciprocating saw or hacksaw*Drill press or hand drill*sander*Bandsaw or jigsaw*Brad nailer an...
By: Moy perez woodshop

Continue Reading »]]>
Fri, 18 Dec 2015 14:38:22 PST
Simple Dorm Table http://www.instructables.com/id/Simple-Dorm-Table/
Simple Dorm Table - More DIY How To Projects]]> http://cdn.instructables.com/F1Z/7M9U/II4WMERF/F1Z7M9UII4WMERF.SQUARE2.jpg http://cdn.instructables.com/F1Z/7M9U/II4WMERF/F1Z7M9UII4WMERF.SQUARE.jpg http://cdn.instructables.com/F1Z/7M9U/II4WMERF/F1Z7M9UII4WMERF.SMALL.jpg ttj54020 The object of this project was to create a simple table to be used from a futon or couch for college course work. The budget was set at $10 for lumber. This makes a great inexpensive gift for college students! Materials To complete this instructable you will need:2 - 2x4's 8 feet (we will only ...
By: ttj54020

Continue Reading »]]>
Sun, 13 Dec 2015 20:29:09 PST
DIY Luxo Jr. Lamp (Pixar Inspired) http://www.instructables.com/id/DIY-Luxo-Jr-Lamp-Pixar-Inspired/
DIY Luxo Jr. Lamp (Pixar Inspired) - More DIY How To Projects]]> http://cdn.instructables.com/F2Z/MD4S/IHI3QS1E/F2ZMD4SIHI3QS1E.SQUARE2.jpg http://cdn.instructables.com/F2Z/MD4S/IHI3QS1E/F2ZMD4SIHI3QS1E.SQUARE.jpg http://cdn.instructables.com/F2Z/MD4S/IHI3QS1E/F2ZMD4SIHI3QS1E.SMALL.jpg mikeandlauren I wanted to make a Pixar style lamp out of wood. It took me three attempts, but I'm happy with the result! CNC Fail I chose this project because I wanted to learn Google Sketchup. It took me about 3 days but I finally got the hang of it. Unfortunately, I couldn't get the X-Carve to cut properl...
By: mikeandlauren

Continue Reading »]]>
Sat, 28 Nov 2015 10:03:18 PST
Split live edge cedar and pine box ((mostly)no power tools) http://www.instructables.com/id/Split-live-edge-cedar-and-pine-box-mostlyno-power-/
Split live edge cedar and pine box ((mostly)no power tools) - More DIY How To Projects]]> http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SQUARE2.jpg http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SQUARE.jpg http://cdn.instructables.com/F1P/OV2A/IGV4FY92/F1POV2AIGV4FY92.SMALL.jpg oleishman this is a concept i made along time ago with the split sides but i never completed it. this week i dug up the one side i had made and a handful of garden stakes to bring this old idea back from the spare parts bin. this build used approximately 20cm 2x4 40cm cedar garden stake 1 cool drift wood and ...
By: oleishman

Continue Reading »]]>
Thu, 12 Nov 2015 01:54:06 PST
Building a Tool cabinet http://www.instructables.com/id/Building-a-Tool-cabinet/
Building a Tool cabinet - More DIY How To Projects]]> http://cdn.instructables.com/FIN/915S/IFGNSOPM/FIN915SIFGNSOPM.SQUARE2.jpg http://cdn.instructables.com/FIN/915S/IFGNSOPM/FIN915SIFGNSOPM.SQUARE.jpg http://cdn.instructables.com/FIN/915S/IFGNSOPM/FIN915SIFGNSOPM.SMALL.jpg magnolia24 Wear safety glasses and hearing protection. Always use straight boards and check for square after each step. Wipe off excess glue with a moist wipe. For the cabinet you'll need: 5 pieces of 1x4 @14.5 " 2 pieces of 1x4 @32 " For the door you'll need: 5 pieces of 1x2 @14.5" 2 pieces of 1x2 @32 " Also...
By: magnolia24

Continue Reading »]]>
Wed, 7 Oct 2015 18:50:43 PDT
How to make a tree shelf http://www.instructables.com/id/How-to-make-a-tree-shelf/
How to make a tree shelf - More DIY How To Projects]]> http://cdn.instructables.com/F2Y/W6HA/IEWNK3BZ/F2YW6HAIEWNK3BZ.SQUARE2.jpg http://cdn.instructables.com/F2Y/W6HA/IEWNK3BZ/F2YW6HAIEWNK3BZ.SQUARE.jpg http://cdn.instructables.com/F2Y/W6HA/IEWNK3BZ/F2YW6HAIEWNK3BZ.SMALL.jpg StephanP1 from scrap wood Preparing the wood I used an old beamI cut the length and width and planed it with a planer.(But you can also use new wood from a store) Mark the joints All the joints are half lap joints.Attach a branch to the stem and make pencil lines on the branch and on the stem to indica...
By: StephanP1

Continue Reading »]]>
Wed, 23 Sep 2015 04:43:29 PDT
A shelf with 1 screw http://www.instructables.com/id/A-screwless-shelf/
A shelf with 1 screw - More DIY How To Projects]]> http://cdn.instructables.com/FHI/IUQT/IEN4Q49N/FHIIUQTIEN4Q49N.SQUARE2.jpg http://cdn.instructables.com/FHI/IUQT/IEN4Q49N/FHIIUQTIEN4Q49N.SQUARE.jpg http://cdn.instructables.com/FHI/IUQT/IEN4Q49N/FHIIUQTIEN4Q49N.SMALL.jpg StephanP1 A simple shelf for a workshop Material You need a long board for the back and short boards for the shelfMark the position for the short boards where ever you want Make your first cut The height of the saw blade is 1/4 of the width of the long board Add a spacer and make your second cut.The...
By: StephanP1

Continue Reading »]]>
Wed, 16 Sep 2015 13:44:58 PDT
workbench with reclaimed tabletop http://www.instructables.com/id/workbench-with-reclaimed-tabletop/
workbench with reclaimed tabletop - More DIY How To Projects]]> http://cdn.instructables.com/FOF/04YY/IDZSE8IV/FOF04YYIDZSE8IV.SQUARE2.jpg http://cdn.instructables.com/FOF/04YY/IDZSE8IV/FOF04YYIDZSE8IV.SQUARE.jpg http://cdn.instructables.com/FOF/04YY/IDZSE8IV/FOF04YYIDZSE8IV.SMALL.jpg maluco This is a sturdy workbench with adjustable feet using a recycled table top that can be replaced later on with something else.Why make this ? It's a lot of fun to learn, experiment with some techniques and a lot cheaper than buying one.Making it from scratch means it can done to any dimension, includ...
By: maluco

Continue Reading »]]>
Mon, 31 Aug 2015 19:58:37 PDT
Glow in the Dark & Back-lit Sign http://www.instructables.com/id/Glow-in-the-Dark-Back-lit-Sign/
Glow in the Dark & Back-lit Sign - More DIY How To Projects]]> http://cdn.instructables.com/FOJ/PLGK/IDU2N0SE/FOJPLGKIDU2N0SE.SQUARE2.jpg http://cdn.instructables.com/FOJ/PLGK/IDU2N0SE/FOJPLGKIDU2N0SE.SQUARE.jpg http://cdn.instructables.com/FOJ/PLGK/IDU2N0SE/FOJPLGKIDU2N0SE.SMALL.jpg MonoLoco Workshop Turn your logo or favorite design into an awesome glow in the dark sign! You can even supercharge it to glow in the light by making it back-lit with UV LED's.A long while back a friend sent me a link to the Instructables article by mikeasaurus. The Glow Table... I almost immediately found some photo...
By: MonoLoco Workshop

Continue Reading »]]>
Thu, 27 Aug 2015 08:34:15 PDT
Plane your wood slabs with a Planing Sled that you build http://www.instructables.com/id/Plane-your-wood-slabs-with-a-Planing-Sled-that-you/
Plane your wood slabs with a Planing Sled that you build - More DIY How To Projects]]> http://cdn.instructables.com/FAQ/3XGZ/IDBHY07R/FAQ3XGZIDBHY07R.SQUARE2.jpg http://cdn.instructables.com/FAQ/3XGZ/IDBHY07R/FAQ3XGZIDBHY07R.SQUARE.jpg http://cdn.instructables.com/FAQ/3XGZ/IDBHY07R/FAQ3XGZIDBHY07R.SMALL.jpg robot-six This instructable gives an overview of how to plane your wood slabs flat using a router and a Planing sled. Start with your wood slabs. Here are the two wood slabs that I want to plane flat Measure your wood slabs maximum width and length. These wood slabs are on the smallish side. So I wante...
By: robot-six

Continue Reading »]]>
Fri, 14 Aug 2015 10:08:37 PDT
adjustable wood sawhorse http://www.instructables.com/id/adjustable-wood-sawhorse/
adjustable wood sawhorse - More DIY How To Projects]]> http://cdn.instructables.com/FAR/ULVZ/ICID2Q08/FARULVZICID2Q08.SQUARE2.jpg http://cdn.instructables.com/FAR/ULVZ/ICID2Q08/FARULVZICID2Q08.SQUARE.jpg http://cdn.instructables.com/FAR/ULVZ/ICID2Q08/FARULVZICID2Q08.SMALL.jpg andrea biffi A good sawhorse is something essential in a workshop, especially if you work with wood and you often need to take outside some board or piece to cut and sand.And if you need a temporary table in the garden for barbecue and parties, these two stacking and adjustable sawhorses are the perfect support....
By: andrea biffi

Continue Reading »]]>
Sun, 26 Jul 2015 00:17:55 PDT
Turning a Camphor Pen http://www.instructables.com/id/Turning-a-Camphor-Pen/
Turning a Camphor Pen - More DIY How To Projects]]> http://cdn.instructables.com/F73/2MPJ/IC5C3FMX/F732MPJIC5C3FMX.SQUARE2.jpg http://cdn.instructables.com/F73/2MPJ/IC5C3FMX/F732MPJIC5C3FMX.SQUARE.jpg http://cdn.instructables.com/F73/2MPJ/IC5C3FMX/F732MPJIC5C3FMX.SMALL.jpg HPandLOTR So I am a pen turner and I'd say I'm a fairly decent one. There are many secrets to turning a pen that aren't shown in the instructions that come with your pen kit. Today I'll show you how i turned a Slimline Pen out of Camphor wood. Preparing your blanks for turning I held the brass tube up to...
By: HPandLOTR

Continue Reading »]]>
Thu, 16 Jul 2015 07:32:55 PDT
Crochet hook http://www.instructables.com/id/Crochet-hook/
Crochet hook - More DIY How To Projects]]> http://cdn.instructables.com/FVU/0L4U/IANRKH06/FVU0L4UIANRKH06.SQUARE2.jpg http://cdn.instructables.com/FVU/0L4U/IANRKH06/FVU0L4UIANRKH06.SQUARE.jpg http://cdn.instructables.com/FVU/0L4U/IANRKH06/FVU0L4UIANRKH06.SMALL.jpg world of woodcraft I know a lot of people who crochet. So much so that a while back I decided to make my mum the best crochet hook in the world ever. This was perhaps a little foolish endeavor for a non crocheter but allowed me to do a lot of geeky research and experiments.I documented my research at the time on the F...
By: world of woodcraft

Continue Reading »]]>
Mon, 8 Jun 2015 11:18:41 PDT
Abstract Wood Wall Art http://www.instructables.com/id/Abstract-Wood-Wall-Art/
Abstract Wood Wall Art - More DIY How To Projects]]> http://cdn.instructables.com/FLW/7P0I/IA0X64A0/FLW7P0IIA0X64A0.SQUARE2.jpg http://cdn.instructables.com/FLW/7P0I/IA0X64A0/FLW7P0IIA0X64A0.SQUARE.jpg http://cdn.instructables.com/FLW/7P0I/IA0X64A0/FLW7P0IIA0X64A0.SMALL.jpg RoeyLeon HeyI decided to bring some interest to my living roomBought 7 long wood Planks each 2 meter long and 2x2 cm wide.I asked for the guy at the wood shop to cut each and every plank into a different size ( one will be 10 cm , 12, cm 6 cm and so on )attached them to each other on my living room floor , ...
By: RoeyLeon

Continue Reading »]]>
Mon, 25 May 2015 00:45:02 PDT
Hanging camera slider with arm extension http://www.instructables.com/id/Hanging-camera-slider-with-arm-extension/
Hanging camera slider with arm extension - More DIY How To Projects]]> http://cdn.instructables.com/FHZ/7CU0/I9QWJTI2/FHZ7CU0I9QWJTI2.SQUARE2.jpg http://cdn.instructables.com/FHZ/7CU0/I9QWJTI2/FHZ7CU0I9QWJTI2.SQUARE.jpg http://cdn.instructables.com/FHZ/7CU0/I9QWJTI2/FHZ7CU0I9QWJTI2.SMALL.jpg tlee2 This is my camera setup for my workshop. Its so versatile and covers nearly every shot that I need. The camera is mounted onto an old adjustable lamp arm which slides along a track that is mounted to a beam in the ceiling. This setup is quite specific to my workshop layout but hopefully this gives y...
By: tlee2

Continue Reading »]]>
Sat, 16 May 2015 23:15:02 PDT
Make Your Irwin Clamps Longer - For Free http://www.instructables.com/id/Make-Your-Irwin-Clamps-Longer-For-Free/
Make Your Irwin Clamps Longer - For Free - More DIY How To Projects]]> http://cdn.instructables.com/FN5/ZUC3/I9L6LTVV/FN5ZUC3I9L6LTVV.SQUARE2.jpg http://cdn.instructables.com/FN5/ZUC3/I9L6LTVV/FN5ZUC3I9L6LTVV.SQUARE.jpg http://cdn.instructables.com/FN5/ZUC3/I9L6LTVV/FN5ZUC3I9L6LTVV.SMALL.jpg stangtime When I'm working on a project in my shop the longer clamps are often committed to other jobs and I'm left with smaller clamps. The obvious answer is to get more clamps (you can never have enough of them), but often I only need another inch or two to make the smaller clamps work. An easy mod to squ...
By: stangtime

Continue Reading »]]>
Tue, 12 May 2015 12:32:35 PDT
Contractor Saw Dust Collection http://www.instructables.com/id/Contractor-Saw-Dust-Collection/
Contractor Saw Dust Collection - More DIY How To Projects]]> http://cdn.instructables.com/F9W/5GEX/I9EOQZ0V/F9W5GEXI9EOQZ0V.SQUARE2.jpg http://cdn.instructables.com/F9W/5GEX/I9EOQZ0V/F9W5GEXI9EOQZ0V.SQUARE.jpg http://cdn.instructables.com/F9W/5GEX/I9EOQZ0V/F9W5GEXI9EOQZ0V.SMALL.jpg TheWoodfather Ugh. Dust, amirite?My shopvac isn’t very high quality and a proper dust collection system is a long way off for me, but I’m sick of tasting pine with my evening meal. And I can’t leave anything in my shop without a thick coating of dust forming on it. I left my bike in the shop while I made a few cu...
By: TheWoodfather

Continue Reading »]]>
Thu, 7 May 2015 16:39:49 PDT
bamboo wine holder http://www.instructables.com/id/bamboo-wine-holder/
bamboo wine holder - More DIY How To Projects]]> http://cdn.instructables.com/F7W/VO1L/I84B924L/F7WVO1LI84B924L.SQUARE2.jpg http://cdn.instructables.com/F7W/VO1L/I84B924L/F7WVO1LI84B924L.SQUARE.jpg http://cdn.instructables.com/F7W/VO1L/I84B924L/F7WVO1LI84B924L.SMALL.jpg sakwijaya lets make bamboo wine holder without glue Tools and Material Tools :- saw- axe- sandpaper - carver- brush- glasses- Furnish- hammerMaterials :-bamboo Making main body holder the making of main body holder (wine body holder) main body holder size : 30 cm x 12 cmuse sandpaper cc320cw for the tu...
By: sakwijaya

Continue Reading »]]>
Sun, 5 Apr 2015 08:45:04 PDT
Laptop Stand http://www.instructables.com/id/Laptop-Stand-7/
Laptop Stand - More DIY How To Projects]]> http://cdn.instructables.com/FFZ/3T5T/I7MY8W0V/FFZ3T5TI7MY8W0V.SQUARE2.jpg http://cdn.instructables.com/FFZ/3T5T/I7MY8W0V/FFZ3T5TI7MY8W0V.SQUARE.jpg http://cdn.instructables.com/FFZ/3T5T/I7MY8W0V/FFZ3T5TI7MY8W0V.SMALL.jpg babou76 Hello everybody,Actually I learn cabinet-maker. For my first instructable I build a laptop stand for desk. It's better when you work with paper and cooled fast the laptop. I took pictures for steps. It's my first try for the dimension, they can be optimized. I hope that my model will inspire readers...
By: babou76

Continue Reading »]]>
Sun, 29 Mar 2015 17:30:00 PDT
12 Awesome Hot Glue Hacks http://www.instructables.com/id/12-Awesome-Hot-Glue-Hacks/
12 Awesome Hot Glue Hacks - More DIY How To Projects]]> http://cdn.instructables.com/F0U/FLYR/I4PHKBHW/F0UFLYRI4PHKBHW.SQUARE2.jpg http://cdn.instructables.com/F0U/FLYR/I4PHKBHW/F0UFLYRI4PHKBHW.SQUARE.jpg http://cdn.instructables.com/F0U/FLYR/I4PHKBHW/F0UFLYRI4PHKBHW.SMALL.jpg darbinorvar The hot glue gun is a really cool tool to have in any workshop. No matter whether you need instant holding power, insulation, or the properties of soft plastic, the hot glue gun is one practical tool to have at your disposal. Let's take a look at a couple of different interesting ways to use the hot...
By: darbinorvar

Continue Reading »]]>
Wed, 7 Jan 2015 15:06:09 PST
one hand bottle opener http://www.instructables.com/id/one-hand-bottle-opener/
one hand bottle opener - More DIY How To Projects]]> http://cdn.instructables.com/FAU/C001/I70B0W2B/FAUC001I70B0W2B.SQUARE2.jpg http://cdn.instructables.com/FAU/C001/I70B0W2B/FAUC001I70B0W2B.SQUARE.jpg http://cdn.instructables.com/FAU/C001/I70B0W2B/FAUC001I70B0W2B.SMALL.jpg StephanP1 This bottle opener works better than any other bottle opener I know. Cut a piece of scrap wood the dimension doesn't matter Round the edges if you don't have a router, use sandaper Cut it in length ca. 10cm Drill a hole to avoid splintering Sanding sanding, sanding ... Nailing a n...
By: StephanP1

Continue Reading »]]>
Sun, 8 Mar 2015 16:27:31 PDT
Create your own acorn necklace http://www.instructables.com/id/Create-your-own-acorn-necklace/
Create your own acorn necklace - More DIY How To Projects]]> http://cdn.instructables.com/FAN/SMW7/I6YLT3Y1/FANSMW7I6YLT3Y1.SQUARE2.jpg http://cdn.instructables.com/FAN/SMW7/I6YLT3Y1/FANSMW7I6YLT3Y1.SQUARE.jpg http://cdn.instructables.com/FAN/SMW7/I6YLT3Y1/FANSMW7I6YLT3Y1.SMALL.jpg Amaries Although it’s almost spring here in Nothern Europe I am going to show you how to make a beautiful acorn pendant. I love the combination of walnut or other dark sorts of wood with oak and this is my favorite necklace. I hope it will be yours too. Some more pictures Materials I don’t have a bi...
By: Amaries

Continue Reading »]]>
Sat, 7 Mar 2015 02:05:45 PST
Simple Sturdy Low Cost Furniture http://www.instructables.com/id/Simple-Sturdy-Low-Cost-Furniture/
Simple Sturdy Low Cost Furniture - More DIY How To Projects]]> http://cdn.instructables.com/FNC/GRRG/I5P7LKSZ/FNCGRRGI5P7LKSZ.SQUARE2.jpg http://cdn.instructables.com/FNC/GRRG/I5P7LKSZ/FNCGRRGI5P7LKSZ.SQUARE.jpg http://cdn.instructables.com/FNC/GRRG/I5P7LKSZ/FNCGRRGI5P7LKSZ.SMALL.jpg BrianE2 This Instructable will show how to build simple, low cost, sturdy, wood furniture that can look good and last for a long time. I recommend reading through the entire Instructable before you begin. I am not a professional wood worker and some of my methods/materials may highlight this fact. I have ...
By: BrianE2

Continue Reading »]]>
Wed, 4 Feb 2015 02:46:50 PST
C-Clamp iPhone Stand http://www.instructables.com/id/C-Clamp-iPhone-Stand/
C-Clamp iPhone Stand - More DIY How To Projects]]> http://cdn.instructables.com/FO7/K2RE/I5DT3LYX/FO7K2REI5DT3LYX.SQUARE2.jpg http://cdn.instructables.com/FO7/K2RE/I5DT3LYX/FO7K2REI5DT3LYX.SQUARE.jpg http://cdn.instructables.com/FO7/K2RE/I5DT3LYX/FO7K2REI5DT3LYX.SMALL.jpg nicknawa I made a tiny C-Clamp for fun and realized that it works really well as a phone stand so here are the instructions on how to make one yourself. So you are aware, this instructable requires some basic jig making and needs some tools that everyone may not have. I will try to find work arounds as we go...
By: nicknawa

Continue Reading »]]>
Thu, 29 Jan 2015 10:44:54 PST
Tablesaw Outfeed Support Workstation with Aux Fence & Storage http://www.instructables.com/id/How-to-Install-a-Nissan-Frontier-Bed-Rail-System-o/
Tablesaw Outfeed Support Workstation with Aux Fence & Storage - More DIY How To Projects]]> http://cdn.instructables.com/FFR/CYU3/I4LKPBQD/FFRCYU3I4LKPBQD.SQUARE2.jpg http://cdn.instructables.com/FFR/CYU3/I4LKPBQD/FFRCYU3I4LKPBQD.SQUARE.jpg http://cdn.instructables.com/FFR/CYU3/I4LKPBQD/FFRCYU3I4LKPBQD.SMALL.jpg jasonruhl A few years ago I got a small benchtop tablesaw (DeWalt DW745, the older model than what's shown but it's nearly the same saw). I immediately wanted an outfeed support that would allow me to rip a full 4x8 sheet of plywood if necessary. This workstation allows me to do that, is easily movable but st...
By: jasonruhl

Continue Reading »]]>
Thu, 8 Jan 2015 13:56:22 PST
The Camera Track and Boom System http://www.instructables.com/id/The-Camera-Track-and-Boom-System/
The Camera Track and Boom System - More DIY How To Projects]]> http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SQUARE2.jpg http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SQUARE.jpg http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SMALL.jpg -BALES- The bulk of work in my shop is custom drum building with Calderwood Percussion, which includes making build videos for our Youtube channel. My shop is roughly 10' x 25' with one central pathway and the tools arranged along the perimeter. Adding an obstacle like a tripod is hindering because it's a...
By: -BALES-

Continue Reading »]]>
Mon, 15 Dec 2014 16:33:04 PST
Wooden iPhone Case http://www.instructables.com/id/Wooden-iPhone-Case/
Wooden iPhone Case - More DIY How To Projects]]> http://cdn.instructables.com/F5R/30X5/I08G63RA/F5R30X5I08G63RA.SQUARE2.jpg http://cdn.instructables.com/F5R/30X5/I08G63RA/F5R30X5I08G63RA.SQUARE.jpg http://cdn.instructables.com/F5R/30X5/I08G63RA/F5R30X5I08G63RA.SMALL.jpg deluges Hello everyone,So my dad got a brand new iPhone 5s (already outdated now) and I know that he would never buy a case for it so I decided to take the matter in my own hands and craft one for him, so that he would feel guilty if he said he didn't want it.Although he has a 5s, you can make this case for...
By: deluges

Continue Reading »]]>
Thu, 18 Sep 2014 13:51:19 PDT
scrap ends table http://www.instructables.com/id/scrap-ends-table/
scrap ends table - More DIY How To Projects]]> http://cdn.instructables.com/FYT/E9WZ/HZZRJK4W/FYTE9WZHZZRJK4W.SQUARE2.jpg http://cdn.instructables.com/FYT/E9WZ/HZZRJK4W/FYTE9WZHZZRJK4W.SQUARE.jpg http://cdn.instructables.com/FYT/E9WZ/HZZRJK4W/FYTE9WZHZZRJK4W.SMALL.jpg mikeasaurus It might be hard to believe, but this attractive end grain table was made almost entirely with scrap wood. It looks amazing and is easy to make as it doesn't matter the size or of the scrap wood you use, or that you aren't precise with your cuts. The only parts of this project I bought were a 3' ...
By: mikeasaurus

Continue Reading »]]>
Fri, 12 Sep 2014 11:42:23 PDT
Trailer Trolley http://www.instructables.com/id/Trailer-Trolley/
Trailer Trolley - More DIY How To Projects]]> http://cdn.instructables.com/FQX/ESYG/HZ6T7P98/FQXESYGHZ6T7P98.SQUARE2.jpg http://cdn.instructables.com/FQX/ESYG/HZ6T7P98/FQXESYGHZ6T7P98.SQUARE.jpg http://cdn.instructables.com/FQX/ESYG/HZ6T7P98/FQXESYGHZ6T7P98.SMALL.jpg HUKBMBEAR The reason for this instructable is one which happens to us all - A little bit of age.We have a trailer which we use for camping, but having no way to get it into the garden for storage is kept in the front between the Bay Window and the front wall (see the initial pictures). When we want to use it ...
By: HUKBMBEAR

Continue Reading »]]>
Sat, 23 Aug 2014 12:16:17 PDT
Prensas para carpintería http://www.instructables.com/id/Abrazaderas-para-trabajar-la-madera/
Prensas para carpintería - More DIY How To Projects]]> http://cdn.instructables.com/FCR/3SNQ/HXLMUKI7/FCR3SNQHXLMUKI7.SQUARE2.jpg http://cdn.instructables.com/FCR/3SNQ/HXLMUKI7/FCR3SNQHXLMUKI7.SQUARE.jpg http://cdn.instructables.com/FCR/3SNQ/HXLMUKI7/FCR3SNQHXLMUKI7.SMALL.jpg Roninofthewest Este proyecto puede ser un poco difícil para ellos que no estén iniciados en los fundamentales de la carpintería, pero si tienes un poco de experiencia en el taller, este debería ser bastante fácil. Este proyecto es útil si quieres actualizar tu taller, o simplemente aumentar tu colección de prensas...
By: Roninofthewest

Continue Reading »]]>
Thu, 17 Jul 2014 09:02:24 PDT
A Chair for the Great Outdoors http://www.instructables.com/id/A-Chair-for-the-Great-Outdoors/
A Chair for the Great Outdoors - More DIY How To Projects]]> http://cdn.instructables.com/FBH/QTTY/HXA9QG8C/FBHQTTYHXA9QG8C.SQUARE2.jpg http://cdn.instructables.com/FBH/QTTY/HXA9QG8C/FBHQTTYHXA9QG8C.SQUARE.jpg http://cdn.instructables.com/FBH/QTTY/HXA9QG8C/FBHQTTYHXA9QG8C.SMALL.jpg TinkerJim This is a project that will reward you with comfort! It will last outdoors for years and years with no upkeep, weathering gracefully as the years roll on. It has a natural rugged utilitarian style, and making one of these chairs is an easy weekend project. The inspiration for this chair came fro...
By: TinkerJim

Continue Reading »]]>
Mon, 7 Jul 2014 08:41:13 PDT
3D Wooden Portrait http://www.instructables.com/id/3D-Wooden-Portrait/
3D Wooden Portrait - More DIY How To Projects]]> http://cdn.instructables.com/FHM/5UV4/HVS1CPG1/FHM5UV4HVS1CPG1.SQUARE2.jpg http://cdn.instructables.com/FHM/5UV4/HVS1CPG1/FHM5UV4HVS1CPG1.SQUARE.jpg http://cdn.instructables.com/FHM/5UV4/HVS1CPG1/FHM5UV4HVS1CPG1.SMALL.jpg ronanmor So my idea was to add a new twist on those 3-colour stencils you see all over the place. I really like that style but i wanted to add a little texture and depth to the whole thing.So i thought why not make it out of wood and use a different colour wood for each layer. That way you get that kind of t...
By: ronanmor

Continue Reading »]]>
Thu, 29 May 2014 08:44:54 PDT
DIY Wooden sunglasses http://www.instructables.com/id/wooden-sunglasses/
DIY Wooden sunglasses - More DIY How To Projects]]> http://cdn.instructables.com/F7P/6XW5/HSNFX9UA/F7P6XW5HSNFX9UA.SQUARE2.jpg http://cdn.instructables.com/F7P/6XW5/HSNFX9UA/F7P6XW5HSNFX9UA.SQUARE.jpg http://cdn.instructables.com/F7P/6XW5/HSNFX9UA/F7P6XW5HSNFX9UA.SMALL.jpg sabladask Hi I am form Norway. My first attempt at making wooden sunglasses was 4 years ago, but that attempt did not succeed very well. But about half a year ago I finally succeeded. My research in the project started basically from scratch. At the beginning I had only a very basic homebuilt cnc(I still use...
By: sabladask

Continue Reading »]]>
Tue, 11 Mar 2014 14:25:50 PDT
Wood drill bits made of a spoke http://www.instructables.com/id/Wood-drill-bits-made-of-a-spoke/
Wood drill bits made of a spoke - More DIY How To Projects]]> http://cdn.instructables.com/F4I/C4C6/HSASL8EZ/F4IC4C6HSASL8EZ.SQUARE2.jpg http://cdn.instructables.com/F4I/C4C6/HSASL8EZ/F4IC4C6HSASL8EZ.SQUARE.jpg http://cdn.instructables.com/F4I/C4C6/HSASL8EZ/F4IC4C6HSASL8EZ.SMALL.jpg Tech4All Drilling wood, specially if you have to do it by hand, must be done in steps: first a small hole, then a bit larger, then to size. Or as many in-between steps as needed. Woodworkers have collections of drills, but what to do when you have to start from scratch? We start with a drill bit of good qual...
By: Tech4All

Continue Reading »]]>
Tue, 4 Mar 2014 07:54:30 PST
ShopTent: collapsible dust-free storage for garage workshop http://www.instructables.com/id/ShopTent-collapsible-dust-free-storage-for-garage-/
ShopTent: collapsible dust-free storage for garage workshop - More DIY How To Projects]]> http://cdn.instructables.com/FHT/MKC2/HSGRT6U1/FHTMKC2HSGRT6U1.SQUARE2.jpg http://cdn.instructables.com/FHT/MKC2/HSGRT6U1/FHTMKC2HSGRT6U1.SQUARE.jpg http://cdn.instructables.com/FHT/MKC2/HSGRT6U1/FHTMKC2HSGRT6U1.SMALL.jpg seamster I do a lot of woodworking in my garage, where I also store all of our family bicycles.  Keeping our bikes clean has always been a headache for me, so I decided it was time to come up with a clean place within my garage to keep our bikes where they would be protected from all the saw dust, but still...
By: seamster

Continue Reading »]]>
Fri, 7 Mar 2014 10:28:27 PST