Instructables: exploring - workshop - woodworking http://www.instructables.com Mon, 22 Dec 2014 08:31:57 PST BLOX v1.01 last min cristmas gift http://www.instructables.com/id/last-min-cristmas-gift/
last min cristmas gift - More DIY How To Projects]]> http://cdn.instructables.com/F2S/XYQ1/I3THRJ9I/F2SXYQ1I3THRJ9I.SQUARE2.jpg http://cdn.instructables.com/F2S/XYQ1/I3THRJ9I/F2SXYQ1I3THRJ9I.SQUARE.jpg http://cdn.instructables.com/F2S/XYQ1/I3THRJ9I/F2SXYQ1I3THRJ9I.SMALL.jpg mischa19 it is a realy simpel project all you need is a piece of wood a saw sandpaper bamboe skewers a drill and ear protection marking firt you start whit making two lines an inch from the edge of the wood saw then you set up you saw to cut 6mm pieces if you cut about 60 pieces you get 30 underlayers ...
By: mischa19

Continue Reading »]]>
Mon, 22 Dec 2014 07:02:04 PST
Dinosaur Trophy http://www.instructables.com/id/Dinosaur-Trophy/
Dinosaur Trophy - More DIY How To Projects]]> http://cdn.instructables.com/FVI/C6I5/I3THN1BO/FVIC6I5I3THN1BO.SQUARE2.jpg http://cdn.instructables.com/FVI/C6I5/I3THN1BO/FVIC6I5I3THN1BO.SQUARE.jpg http://cdn.instructables.com/FVI/C6I5/I3THN1BO/FVIC6I5I3THN1BO.SMALL.jpg pudtiny This instructable will take you through the steps of converting a cheap wooden dinosaur puzzle into a large dinosaur wall trophy. Bits & Bobs - Tools & Stuff MaterialPuzzleWood GlueSpray mount (or other way of temporarily attaching paper templates to wood)Card for shield templatePicture HangerWoo...
By: pudtiny

Continue Reading »]]>
Sun, 21 Dec 2014 12:00:27 PST
Bass Clef Cutting Board http://www.instructables.com/id/Bass-Clef-Cutting-Board/
Bass Clef Cutting Board - More DIY How To Projects]]> http://cdn.instructables.com/F1U/EGC9/I3VHM8Q5/F1UEGC9I3VHM8Q5.SQUARE2.jpg http://cdn.instructables.com/F1U/EGC9/I3VHM8Q5/F1UEGC9I3VHM8Q5.SQUARE.jpg http://cdn.instructables.com/F1U/EGC9/I3VHM8Q5/F1UEGC9I3VHM8Q5.SMALL.jpg LuckyGoose I wanted to make my girlfriend a gift for Christmas. She's a musician (teacher + performer), so what's better than a pixelated music note cutting board? I drew inspiration from this instructable (http://www.instructables.com/id/Pixel-Art-Chopping... but deviated a little bit in the process. The gift...
By: LuckyGoose

Continue Reading »]]>
Sun, 21 Dec 2014 08:57:27 PST
coconut drinking glass http://www.instructables.com/id/coconut-drinking-glass/
coconut drinking glass - More DIY How To Projects]]> http://cdn.instructables.com/FCR/SER2/I3VHKVMV/FCRSER2I3VHKVMV.SQUARE2.jpg http://cdn.instructables.com/FCR/SER2/I3VHKVMV/FCRSER2I3VHKVMV.SQUARE.jpg http://cdn.instructables.com/FCR/SER2/I3VHKVMV/FCRSER2I3VHKVMV.SMALL.jpg Mattie52x11 In the summer I like to drink lemonade, but normal glasses are not cool.A friend of me give me a coconut and I decided to make a drink glass of it.This instructable will explain how to do this. What you need: one coconut a drill a knife a marker a plastic cup a stanley knife and scissors a vile...
By: Mattie52x11

Continue Reading »]]>
Sun, 21 Dec 2014 04:46:35 PST
How To Make An Elder Wand http://www.instructables.com/id/How-To-Make-An-Elder-Wand/
How To Make An Elder Wand - More DIY How To Projects]]> http://cdn.instructables.com/F5G/M5LB/I3VHIZ9U/F5GM5LBI3VHIZ9U.SQUARE2.jpg http://cdn.instructables.com/F5G/M5LB/I3VHIZ9U/F5GM5LBI3VHIZ9U.SQUARE.jpg http://cdn.instructables.com/F5G/M5LB/I3VHIZ9U/F5GM5LBI3VHIZ9U.SMALL.jpg mcanales3000 This is how to make a legit elder wand out of only: a skewer a glue gun brown paint white paint a pen Use Glue gun To Make Balls Use the glue gun to make the balls down the wandPicture number two will show what it will look like after doing this Poke Holes I...
By: mcanales3000

Continue Reading »]]>
Sat, 20 Dec 2014 19:05:05 PST
Strata Bench / Fabrication / Part 3 of 3 http://www.instructables.com/id/Strata-Bench-Fabrication-Part-3-of-3/
Strata Bench / Fabrication / Part 3 of 3 - More DIY How To Projects]]> http://cdn.instructables.com/FYI/J50U/I3WWVEHI/FYIJ50UI3WWVEHI.SQUARE2.jpg http://cdn.instructables.com/FYI/J50U/I3WWVEHI/FYIJ50UI3WWVEHI.SQUARE.jpg http://cdn.instructables.com/FYI/J50U/I3WWVEHI/FYIJ50UI3WWVEHI.SMALL.jpg ADintheStudio This project is an exploration into form and workflows - a combination of using manual hand skills, computer aided design (CAD), and digital fabrication techniques - to create a sculptural and functional bench made from stacked and carved plywood. Part 1 - DesignPart 2 - Scale ModelIn Part 3 - Fab...
By: ADintheStudio

Continue Reading »]]>
Sat, 20 Dec 2014 18:26:32 PST
Make your own carbide lathe tools http://www.instructables.com/id/Make-your-own-carbide-lathe-tools/
Make your own carbide lathe tools - More DIY How To Projects]]> http://cdn.instructables.com/F78/K0LC/I3XTS5QF/F78K0LCI3XTS5QF.SQUARE2.jpg http://cdn.instructables.com/F78/K0LC/I3XTS5QF/F78K0LCI3XTS5QF.SQUARE.jpg http://cdn.instructables.com/F78/K0LC/I3XTS5QF/F78K0LCI3XTS5QF.SMALL.jpg VikingCode Carbide turning chisels are interesting whether you’re new to turning or a veteran. They’re fantastic for harder, more abrasive timbers and mixed materials that would normally require a lot of sharpening, and because they’re scrapers you don’t need particularly fancy techniques to get them to work w...
By: VikingCode

Continue Reading »]]>
Sat, 20 Dec 2014 11:10:22 PST
Giant wooden Lego men http://www.instructables.com/id/Giant-wooden-Lego-men/
Giant wooden Lego men - More DIY How To Projects]]> http://cdn.instructables.com/FMT/CQ7T/I3THIW7M/FMTCQ7TI3THIW7M.SQUARE2.jpg http://cdn.instructables.com/FMT/CQ7T/I3THIW7M/FMTCQ7TI3THIW7M.SQUARE.jpg http://cdn.instructables.com/FMT/CQ7T/I3THIW7M/FMTCQ7TI3THIW7M.SMALL.jpg Simon Beggs Wood Turning These are some giant Lego men that I have made. They have all the movements, clips and operations that a standard Lego man has. They are to scale (1 : 6.25). The timbers I have use are Huon pine, Australian red cedar and American walnut. More works @ www.facebook.com/pages/Simon-Beggs-Wood-Turning/1...
By: Simon Beggs Wood Turning

Continue Reading »]]>
Sat, 20 Dec 2014 01:51:39 PST
Pallet Bar http://www.instructables.com/id/Pallet-Bar/
Pallet Bar - More DIY How To Projects]]> http://cdn.instructables.com/FHT/5HWO/I3VHBJZQ/FHT5HWOI3VHBJZQ.SQUARE2.jpg http://cdn.instructables.com/FHT/5HWO/I3VHBJZQ/FHT5HWOI3VHBJZQ.SQUARE.jpg http://cdn.instructables.com/FHT/5HWO/I3VHBJZQ/FHT5HWOI3VHBJZQ.SMALL.jpg mperkins433 For father's day I wanted to surprise my boyfriend with something unexpected and special (not to mention fun that we can all enjoy!) Since we had been talking about buying a bar for the outdoor area but they were all so expensive I looked up some Pinterest ideas and set to my plan in motion. I picke...
By: mperkins433

Continue Reading »]]>
Fri, 19 Dec 2014 20:21:23 PST
Carving a bowl http://www.instructables.com/id/Carving-a-bowl/
Carving a bowl - More DIY How To Projects]]> http://cdn.instructables.com/FYL/WFM1/I3THHGXI/FYLWFM1I3THHGXI.SQUARE2.jpg http://cdn.instructables.com/FYL/WFM1/I3THHGXI/FYLWFM1I3THHGXI.SQUARE.jpg http://cdn.instructables.com/FYL/WFM1/I3THHGXI/FYLWFM1I3THHGXI.SMALL.jpg RichL1 This was the simplest and least time consuming approach to this type of project: Carving a round inner shape. The picture is of a burl i carved into a bowl shape. I took triangular wedges and arranged them under the burl like a cradle and clamped it to the table (another amazing technique for clampi...
By: RichL1

Continue Reading »]]>
Fri, 19 Dec 2014 08:48:37 PST
How to cut a round shape with a circular saw http://www.instructables.com/id/How-to-cut-a-round-shape-with-a-circular-saw/
How to cut a round shape with a circular saw - More DIY How To Projects]]> http://cdn.instructables.com/FVP/Q8XB/I3THHGPV/FVPQ8XBI3THHGPV.SQUARE2.jpg http://cdn.instructables.com/FVP/Q8XB/I3THHGPV/FVPQ8XBI3THHGPV.SQUARE.jpg http://cdn.instructables.com/FVP/Q8XB/I3THHGPV/FVPQ8XBI3THHGPV.SMALL.jpg RichL1 So I've had people ask, watch and wonder how to cut a round profile with a standard circular saw (outer profile only). It is no more dangerous than cutting anything with a circular saw. This is less dangerous really because you're cutting small triangular pieces off the outside with straight cuts. 1...
By: RichL1

Continue Reading »]]>
Fri, 19 Dec 2014 08:46:06 PST
Relief carving made easy http://www.instructables.com/id/Relief-carving-made-easy/
Relief carving made easy - More DIY How To Projects]]> http://cdn.instructables.com/FS2/CPRI/I3THHHSU/FS2CPRII3THHHSU.SQUARE2.jpg http://cdn.instructables.com/FS2/CPRI/I3THHHSU/FS2CPRII3THHHSU.SQUARE.jpg http://cdn.instructables.com/FS2/CPRI/I3THHHSU/FS2CPRII3THHHSU.SMALL.jpg RichL1 This was a daunting idea because I didn't know about it but i tried and found it wasn't too complicated. To start it off, theres a couple ways of looking at this. If you are an artist, and have done this long enough you'll be able to do free-work without drawings. Some people are just natural sculpt...
By: RichL1

Continue Reading »]]>
Fri, 19 Dec 2014 08:30:46 PST
Making cutting boards with cutoffs and scrap wood http://www.instructables.com/id/Making-cutting-boards-with-cutoffs-and-scrap-wood/
Making cutting boards with cutoffs and scrap wood - More DIY How To Projects]]> http://cdn.instructables.com/F9R/WCY6/I3THHG0V/F9RWCY6I3THHG0V.SQUARE2.jpg http://cdn.instructables.com/F9R/WCY6/I3THHG0V/F9RWCY6I3THHG0V.SQUARE.jpg http://cdn.instructables.com/F9R/WCY6/I3THHG0V/F9RWCY6I3THHG0V.SMALL.jpg RichL1 This is a fun and pretty simple project, all you need are a bunch of pieces of food grade wood and glue them into a rough shape then form into a nice cutting board. 1) Take the strips of wood and dimension them on table saw and get them all the same widths.You can make them thicker by using thicker ...
By: RichL1

Continue Reading »]]>
Fri, 19 Dec 2014 07:47:19 PST
Perfect circle using drillpress http://www.instructables.com/id/Perfect-circle-using-drillpress/
Perfect circle using drillpress - More DIY How To Projects]]> http://cdn.instructables.com/FDW/0Z8V/I3U1U6D5/FDW0Z8VI3U1U6D5.SQUARE2.jpg http://cdn.instructables.com/FDW/0Z8V/I3U1U6D5/FDW0Z8VI3U1U6D5.SQUARE.jpg http://cdn.instructables.com/FDW/0Z8V/I3U1U6D5/FDW0Z8VI3U1U6D5.SMALL.jpg knutknackebröd So you need a perfect circle but you dont have access to something like a cnc machine? This ible will show you the way! I needed a perfect circle for a hurdy gurdy (will be an ible some time soon) to be used as the wheel, but the biggest powertool I have is a drillpress..... nothing like a cnc / lat...
By: knutknackebröd

Continue Reading »]]>
Fri, 19 Dec 2014 05:07:56 PST
DIY Doll Sized Rocking Horse http://www.instructables.com/id/Doll-Sized-Rocking-Horse/
DIY Doll Sized Rocking Horse - More DIY How To Projects]]> http://cdn.instructables.com/FU7/PNJI/I3XTS9EK/FU7PNJII3XTS9EK.SQUARE2.jpg http://cdn.instructables.com/FU7/PNJI/I3XTS9EK/FU7PNJII3XTS9EK.SQUARE.jpg http://cdn.instructables.com/FU7/PNJI/I3XTS9EK/FU7PNJII3XTS9EK.SMALL.jpg moabrocks Here goes number 2 Instructable. So I built some beds for my daughters American Girl dolls and wanted to do something else for fun. We purchased some equestrian clothes for one of them so I thought a wooden rocking horse would be nice. There are a million designs out there. I looked around and found...
By: moabrocks

Continue Reading »]]>
Fri, 19 Dec 2014 03:37:56 PST
Minecraft Crossed Swords http://www.instructables.com/id/Minecraft-Crossed-Swords/
Minecraft Crossed Swords - More DIY How To Projects]]> http://cdn.instructables.com/FPW/MHAQ/I3THBALR/FPWMHAQI3THBALR.SQUARE2.jpg http://cdn.instructables.com/FPW/MHAQ/I3THBALR/FPWMHAQI3THBALR.SQUARE.jpg http://cdn.instructables.com/FPW/MHAQ/I3THBALR/FPWMHAQI3THBALR.SMALL.jpg pudtiny Minecraft crossed sword wall art. Not a difficult project but it is a bit time consuming. Bits & Bobs - Tools & Stuff Materials18mm Ply 16" x 21" Picture HangerToolsJigsawMouse SanderDrill with 10mm Wood BitLarge Framing SquareBlack Spray PaintColoured Acrylic Paints Marking Out and Cuttin...
By: pudtiny

Continue Reading »]]>
Thu, 18 Dec 2014 16:50:24 PST
Giant plywood vase http://www.instructables.com/id/Giant-plywood-vase/
Giant plywood vase - More DIY How To Projects]]> http://cdn.instructables.com/FP7/GVFV/I3THAXFW/FP7GVFVI3THAXFW.SQUARE2.jpg http://cdn.instructables.com/FP7/GVFV/I3THAXFW/FP7GVFVI3THAXFW.SQUARE.jpg http://cdn.instructables.com/FP7/GVFV/I3THAXFW/FP7GVFVI3THAXFW.SMALL.jpg Simon Beggs Wood Turning This is a 1.2 meter vase that I make out of plywood. After getting my new lathe I though how can I challenge myself and this is what i came up with. The vase is inspired by Ron KentIts made from a sheet of 2.4m x 1.2m ply cut and laminated together, then turned on the lathe. It is hollow. Done durin...
By: Simon Beggs Wood Turning

Continue Reading »]]>
Thu, 18 Dec 2014 11:43:10 PST
Best works http://www.instructables.com/id/Best-works/
Best works - More DIY How To Projects]]> http://cdn.instructables.com/F5S/4J6F/I3THAZH3/F5S4J6FI3THAZH3.SQUARE2.jpg http://cdn.instructables.com/F5S/4J6F/I3THAZH3/F5S4J6FI3THAZH3.SQUARE.jpg http://cdn.instructables.com/F5S/4J6F/I3THAZH3/F5S4J6FI3THAZH3.SMALL.jpg Simon Beggs Wood Turning After turning for 5 years these are some of my favourite pieces
By: Simon Beggs Wood Turning

Continue Reading »]]>
Thu, 18 Dec 2014 11:30:57 PST
Split Bowls http://www.instructables.com/id/Split-Bowls/
Split Bowls - More DIY How To Projects]]> http://cdn.instructables.com/F81/6NFN/I3THAYAG/F816NFNI3THAYAG.SQUARE2.jpg http://cdn.instructables.com/F81/6NFN/I3THAYAG/F816NFNI3THAYAG.SQUARE.jpg http://cdn.instructables.com/F81/6NFN/I3THAYAG/F816NFNI3THAYAG.SMALL.jpg Simon Beggs Wood Turning These delicate pieces are called split bowls. A thin bowl is turned and then cut in half. It is then reglued on a different axis to form another shape. On my 3 pieces i have embellished with inlays, piercing with a dremmel and other shapes that were fromed by sawing, sanding and drilling. Original i...
By: Simon Beggs Wood Turning

Continue Reading »]]>
Thu, 18 Dec 2014 11:25:04 PST
Collapsible Rifle Stand http://www.instructables.com/id/Collapsible-Rifle-Stand/
Collapsible Rifle Stand - More DIY How To Projects]]> http://cdn.instructables.com/FJB/5XYH/I3THB1WW/FJB5XYHI3THB1WW.SQUARE2.jpg http://cdn.instructables.com/FJB/5XYH/I3THB1WW/FJB5XYHI3THB1WW.SQUARE.jpg http://cdn.instructables.com/FJB/5XYH/I3THB1WW/FJB5XYHI3THB1WW.SMALL.jpg gizmologist If you've got a shooter in your life, chances are he (or she) owns a rifle or shotgun. While these firearms are ergonomic while being used, they are less so when being cleaned and maintained. They'll slide around on the table, fall on your foot, and just generally be ungainly. Protect those expensiv...
By: gizmologist

Continue Reading »]]>
Thu, 18 Dec 2014 10:44:09 PST
Wooden Eyeglasses http://www.instructables.com/id/Wooden-Eyeglasses/
Wooden Eyeglasses - More DIY How To Projects]]> http://cdn.instructables.com/FT4/8PD1/I3TH9D61/FT48PD1I3TH9D61.SQUARE2.jpg http://cdn.instructables.com/FT4/8PD1/I3TH9D61/FT48PD1I3TH9D61.SQUARE.jpg http://cdn.instructables.com/FT4/8PD1/I3TH9D61/FT48PD1I3TH9D61.SMALL.jpg neil.walsky This frame is comprised of Koa, Birch, Pearwood, and Jarrah. Watch the video to see how its made!
By: neil.walsky

Continue Reading »]]>
Thu, 18 Dec 2014 03:39:26 PST
Laptop Stand http://www.instructables.com/id/Laptop-Stand-6/
Laptop Stand - More DIY How To Projects]]> http://cdn.instructables.com/F0A/WMWW/I3TH7RH1/F0AWMWWI3TH7RH1.SQUARE2.jpg http://cdn.instructables.com/F0A/WMWW/I3TH7RH1/F0AWMWWI3TH7RH1.SQUARE.jpg http://cdn.instructables.com/F0A/WMWW/I3TH7RH1/F0AWMWWI3TH7RH1.SMALL.jpg CoreyS1 This laptop stand will be a simplistic design that can work for most laptops, although slight changes in dimensions might be required for the various sizes of laptops. The simplistic size of it allows for it to be constructed using very few materials; in this case, a single 2"x4" (2 feet in length),...
By: CoreyS1

Continue Reading »]]>
Wed, 17 Dec 2014 21:03:19 PST
Bookcase Storage Cubby Unit http://www.instructables.com/id/Bookcase-Storage-Cubby-Unit/
Bookcase Storage Cubby Unit - More DIY How To Projects]]> http://cdn.instructables.com/F8U/FXUQ/I3TH96T3/F8UFXUQI3TH96T3.SQUARE2.jpg http://cdn.instructables.com/F8U/FXUQ/I3TH96T3/F8UFXUQI3TH96T3.SQUARE.jpg http://cdn.instructables.com/F8U/FXUQ/I3TH96T3/F8UFXUQI3TH96T3.SMALL.jpg ecotner My wife wanted a cubby from Ikea, but two problems: they don't make it anymore, and it's junky white laminate to begin with. Having taken a woodworking course at the local community college, I decided I had the necessary skills to tackle it myself. You can see the results in the picture, and I'd ...
By: ecotner

Continue Reading »]]>
Wed, 17 Dec 2014 18:26:25 PST
Open your letters like a boss ! | letter opener | hacksaw blade repo http://www.instructables.com/id/Open-your-letters-like-a-boss-letter-opener-hacksa/
Open your letters like a boss ! | letter opener | hacksaw blade repo - More DIY How To Projects]]> http://cdn.instructables.com/F9E/Y4GK/I3THI4TW/F9EY4GKI3THI4TW.SQUARE2.jpg http://cdn.instructables.com/F9E/Y4GK/I3THI4TW/F9EY4GKI3THI4TW.SQUARE.jpg http://cdn.instructables.com/F9E/Y4GK/I3THI4TW/F9EY4GKI3THI4TW.SMALL.jpg Tom Howbridge Create a letter opener to open your letters in like a boss and as its Christmas time It will be create for opening your Christmas greeting cards from your friends and loved ones !The handle Is Turned on my lathe then a hacksaw blade is snapped to shaped then a curve is grinded to the end and them an...
By: Tom Howbridge

Continue Reading »]]>
Wed, 17 Dec 2014 13:47:44 PST
Game of Thrones Inspired Chess Table http://www.instructables.com/id/Game-of-Thrones-Inspired-Chess-Table/
Game of Thrones Inspired Chess Table - More DIY How To Projects]]> http://cdn.instructables.com/F9I/YHMR/I3R75IUL/F9IYHMRI3R75IUL.SQUARE2.jpg http://cdn.instructables.com/F9I/YHMR/I3R75IUL/F9IYHMRI3R75IUL.SQUARE.jpg http://cdn.instructables.com/F9I/YHMR/I3R75IUL/F9IYHMRI3R75IUL.SMALL.jpg joesighting One night, as I sat down to watch Game of Thrones on HBO, I noticed the carved heraldic bands revolving around the sun thinking “those would be fun to carve on my CarveWright”. I tried to think of a project that I could incorporate these into and came up with the idea of a chess set.I began resea...
By: joesighting

Continue Reading »]]>
Wed, 17 Dec 2014 13:37:52 PST
Crate & Barrel Christmas Hack: Wooden Ornament Trees http://www.instructables.com/id/Crate-Barrel-Christmas-Hack-Wooden-Ornament-Trees/
Crate & Barrel Christmas Hack: Wooden Ornament Trees - More DIY How To Projects]]> http://cdn.instructables.com/F4W/8IU7/I3S5MU21/F4W8IU7I3S5MU21.SQUARE2.jpg http://cdn.instructables.com/F4W/8IU7/I3S5MU21/F4W8IU7I3S5MU21.SQUARE.jpg http://cdn.instructables.com/F4W/8IU7/I3S5MU21/F4W8IU7I3S5MU21.SMALL.jpg ToolboxDivas The other day I was turning the pages of the latest Crate & Barrel holiday catalog and I came upon the cutest ornament trees made of steel. I loved it. But then I thought, this would be totally cool if it were made of wood and had a more rustic feel. So I went back to my workshop and in about 2 ho...
By: ToolboxDivas

Continue Reading »]]>
Wed, 17 Dec 2014 12:49:20 PST
Anniversary Jewelry Box http://www.instructables.com/id/Anniversary-Jewelry-Box/
Anniversary Jewelry Box - More DIY How To Projects]]> http://cdn.instructables.com/FXZ/98A3/I3PK26ON/FXZ98A3I3PK26ON.SQUARE2.jpg http://cdn.instructables.com/FXZ/98A3/I3PK26ON/FXZ98A3I3PK26ON.SQUARE.jpg http://cdn.instructables.com/FXZ/98A3/I3PK26ON/FXZ98A3I3PK26ON.SMALL.jpg IanV2 If you've taken the first few steps of your journey into woodworking, and wish to try your hand at some finer work, here is a fun and straightforward project with a (hopefully) beautiful result! I produced this piece in my earlier days of woodworking, to surprise my wife on our anniversary. It was a...
By: IanV2

Continue Reading »]]>
Wed, 17 Dec 2014 12:39:32 PST
Walnut hallway table topper http://www.instructables.com/id/Walnut-hallway-table-topper/
Walnut hallway table topper - More DIY How To Projects]]> http://cdn.instructables.com/F4I/LLBE/I3PK1WK8/F4ILLBEI3PK1WK8.SQUARE2.jpg http://cdn.instructables.com/F4I/LLBE/I3PK1WK8/F4ILLBEI3PK1WK8.SQUARE.jpg http://cdn.instructables.com/F4I/LLBE/I3PK1WK8/F4ILLBEI3PK1WK8.SMALL.jpg TimBTodd Topper for a metal hallway table topper I found. Found a piece of walnut with an interesting graining pattern and cut it into 3/4" strips and mixed them up. Glue up Glued them together and clamp them up while keeping them flat. Finish I used vinyl sealer and precatalyzed lacquer. Here i...
By: TimBTodd

Continue Reading »]]>
Wed, 17 Dec 2014 12:01:12 PST
Valet Tray http://www.instructables.com/id/Valet-Tray/
Valet Tray - More DIY How To Projects]]> http://cdn.instructables.com/FS8/IK52/I3PK1SR5/FS8IK52I3PK1SR5.SQUARE2.jpg http://cdn.instructables.com/FS8/IK52/I3PK1SR5/FS8IK52I3PK1SR5.SQUARE.jpg http://cdn.instructables.com/FS8/IK52/I3PK1SR5/FS8IK52I3PK1SR5.SMALL.jpg TimBTodd Hunk of 8/4 walnut trued up and cut to blank size. Starting to route out the tray sections. Edge Finished routing out tray sections. Added a spline of walnut into a blank for the sides. Cut them in such a way that the grain will wrap around the tray. Splines Used a jig on the table saw to cut...
By: TimBTodd

Continue Reading »]]>
Wed, 17 Dec 2014 11:51:31 PST
Walnut Coffee Table http://www.instructables.com/id/Walnut-Coffee-Table/
Walnut Coffee Table - More DIY How To Projects]]> http://cdn.instructables.com/FY5/S1AV/I3PK1RFW/FY5S1AVI3PK1RFW.SQUARE2.jpg http://cdn.instructables.com/FY5/S1AV/I3PK1RFW/FY5S1AVI3PK1RFW.SQUARE.jpg http://cdn.instructables.com/FY5/S1AV/I3PK1RFW/FY5S1AVI3PK1RFW.SMALL.jpg TimBTodd Here is my hunk(s) of wood. 8/4 walnut from a local shop. Trued up the sides and planed to thickness. Floating Tenon Jig I whipped one up and made some maple floating tenons from scrap. Glue up Added some dowels between the tenons and glued it up between a couple of bow clamps. Cross cut the ...
By: TimBTodd

Continue Reading »]]>
Wed, 17 Dec 2014 11:43:52 PST
The Wooden Whale of Woe http://www.instructables.com/id/The-Wooden-Whale-of-Woe/
The Wooden Whale of Woe - More DIY How To Projects]]> http://cdn.instructables.com/FZO/IUQJ/I3R74PY8/FZOIUQJI3R74PY8.SQUARE2.jpg http://cdn.instructables.com/FZO/IUQJ/I3R74PY8/FZOIUQJI3R74PY8.SQUARE.jpg http://cdn.instructables.com/FZO/IUQJ/I3R74PY8/FZOIUQJI3R74PY8.SMALL.jpg bretinc Greeting my fellow Instructables I've made this whale mostly out of branches and other things I had laying around the house, it was 100% free. The story all starts when my partner in crime and I were in Target a couple weeks back and had seen this very simple outline of a 1' x 2" wooden whale made o...
By: bretinc

Continue Reading »]]>
Wed, 17 Dec 2014 11:11:42 PST
Make an Adjustable Knitting Loom http://www.instructables.com/id/Make-an-Adjustable-Knitting-Loom/
Make an Adjustable Knitting Loom - More DIY How To Projects]]> http://cdn.instructables.com/FDH/UYEB/I3R74OHW/FDHUYEBI3R74OHW.SQUARE2.jpg http://cdn.instructables.com/FDH/UYEB/I3R74OHW/FDHUYEBI3R74OHW.SQUARE.jpg http://cdn.instructables.com/FDH/UYEB/I3R74OHW/FDHUYEBI3R74OHW.SMALL.jpg petercd This multi-tasking loom is my DIY version of the commercial All 'n one knitting board It seemed like an easy wood-work project and looms in general are expensive and fairly hard to come by down my side of the woods.Using the 2 small spacer blocks it is possible to use it as a knitting board, either...
By: petercd

Continue Reading »]]>
Wed, 17 Dec 2014 10:58:21 PST
Woodwork wine rack http://www.instructables.com/id/Woodwork-wine-rack/
Woodwork wine rack - More DIY How To Projects]]> http://cdn.instructables.com/FLT/HCA6/I3PJUX7Z/FLTHCA6I3PJUX7Z.SQUARE2.jpg http://cdn.instructables.com/FLT/HCA6/I3PJUX7Z/FLTHCA6I3PJUX7Z.SQUARE.jpg http://cdn.instructables.com/FLT/HCA6/I3PJUX7Z/FLTHCA6I3PJUX7Z.SMALL.jpg Tahir the Wonderful Do you like wine? Do you like things hanging on the wall that hold your wine for you? Do you in fact like to have a wine rack hanging in your kitchen? If any of your answers to the questions were yes then this Inscructable is for you! This specific presentation here is here to show you how to make y...
By: Tahir the Wonderful

Continue Reading »]]>
Tue, 16 Dec 2014 19:06:42 PST
Rustic Guitar Stand http://www.instructables.com/id/Rustic-Guitar-Stand/
Rustic Guitar Stand - More DIY How To Projects]]> http://cdn.instructables.com/F7J/NJ3C/I3R71OUS/F7JNJ3CI3R71OUS.SQUARE2.jpg http://cdn.instructables.com/F7J/NJ3C/I3R71OUS/F7JNJ3CI3R71OUS.SQUARE.jpg http://cdn.instructables.com/F7J/NJ3C/I3R71OUS/F7JNJ3CI3R71OUS.SMALL.jpg tmak6 I've been wanting to try my hand at rustic furniture for awhile but wasn't sure where to start. Then one day I tripped over my guitar and thought I really needed a guitar stand. Light bulb! I'll make one out of wood. It was an easy project and a good one for my first project and instructable. Go s...
By: tmak6

Continue Reading »]]>
Tue, 16 Dec 2014 19:05:16 PST
Prop Base http://www.instructables.com/id/Prop-Base/
Prop Base - More DIY How To Projects]]> http://cdn.instructables.com/F4M/T8RS/I3R71IB1/F4MT8RSI3R71IB1.SQUARE2.jpg http://cdn.instructables.com/F4M/T8RS/I3R71IB1/F4MT8RSI3R71IB1.SQUARE.jpg http://cdn.instructables.com/F4M/T8RS/I3R71IB1/F4MT8RSI3R71IB1.SMALL.jpg gg2inc I wanted to create a base for various items that I make. I was looking for something unusual and it had to have backlighting. I made this the base out of wood and once it was complete, I had it immersion printed using a Hydrographic system so it looked like it was made from black carbon fiber. ...
By: gg2inc

Continue Reading »]]>
Tue, 16 Dec 2014 18:35:04 PST
Low Cost Walking Stick http://www.instructables.com/id/Low-Cost-Walking-Stick/
Low Cost Walking Stick - More DIY How To Projects]]> http://cdn.instructables.com/FPX/Q66M/I3R7088T/FPXQ66MI3R7088T.SQUARE2.jpg http://cdn.instructables.com/FPX/Q66M/I3R7088T/FPXQ66MI3R7088T.SQUARE.jpg http://cdn.instructables.com/FPX/Q66M/I3R7088T/FPXQ66MI3R7088T.SMALL.jpg graydog111 MATERIALSOld derelict post hole digger handle or suitable wooden shaftOld Brass Candle stick from Salvation Army Thrift storeSanding discs & sandpaper of various grits1.5" pool ball StainClear Sealant, such as clear varnish or lacquer3/8" X 4" boltTOOLSVariable Speed 1.5" Electric Makita hand held B...
By: graydog111

Continue Reading »]]>
Tue, 16 Dec 2014 16:32:15 PST
Flaming Shots Menorah http://www.instructables.com/id/Flaming-Shots-Menorah/
Flaming Shots Menorah - More DIY How To Projects]]> http://cdn.instructables.com/FTZ/KM1W/I3PJU2VO/FTZKM1WI3PJU2VO.SQUARE2.jpg http://cdn.instructables.com/FTZ/KM1W/I3PJU2VO/FTZKM1WI3PJU2VO.SQUARE.jpg http://cdn.instructables.com/FTZ/KM1W/I3PJU2VO/FTZKM1WI3PJU2VO.SMALL.jpg Carleyy Do you love Hanukkah parties? Put more "PARTY" in your Hanukkah with this Flaming Shots Menorah.FLAMING SHOTS MENORAH = EXTREME HANUKKAH CELEBRATION!!It's fairly simply to make with access to a basic wood shop tools and will be sure to impress holiday guests.Check out these 3 Flaming Holiday Shots t...
By: Carleyy

Continue Reading »]]>
Tue, 16 Dec 2014 15:36:53 PST
How to make a swing http://www.instructables.com/id/How-to-make-a-swing/
How to make a swing - More DIY How To Projects]]> http://cdn.instructables.com/F2C/AZS8/I3PJU132/F2CAZS8I3PJU132.SQUARE2.jpg http://cdn.instructables.com/F2C/AZS8/I3PJU132/F2CAZS8I3PJU132.SQUARE.jpg http://cdn.instructables.com/F2C/AZS8/I3PJU132/F2CAZS8I3PJU132.SMALL.jpg chekun.he This instructable will show you how to make a swing. So read it, make it and endjoy it. Step 1: All you need is ... These are what you need to make the swing:Materials: - a piece of wood (I used 4 MDF pieces of 30 cm x 30 cm x 0.6 cm)- 4 x M10 ringbolt- screws (I used 3,0 x 16 mm chipboard screws...
By: chekun.he

Continue Reading »]]>
Tue, 16 Dec 2014 15:28:38 PST
stuff to make http://www.instructables.com/id/stuff-to-make/ http://www.instructables.com/files/deriv/FP8/HO08/I3PJTX5Z/FP8HO08I3PJTX5Z.SQUARE2.jpg http://www.instructables.com/files/deriv/FP8/HO08/I3PJTX5Z/FP8HO08I3PJTX5Z.SQUARE.jpg http://www.instructables.com/files/deriv/FP8/HO08/I3PJTX5Z/FP8HO08I3PJTX5Z.SMALL.jpg mgarza10 VortoLight - Internet of Things lamp with spark.io Metal Doctor Who Sonic Screwdriver with Arduino Ollivanders Wand Box with free templates! Takedown Recurve Bow - Home made Merida's Bow Nerf Sledgefire lever-action mod How to make a bow and arrow--10 Steps Only How t...
By: mgarza10

Continue Reading »]]>
Tue, 16 Dec 2014 15:10:33 PST
how toos http://www.instructables.com/id/how-toos/ http://cdn.instructables.com/FFY/S2SU/I3PJTWXB/FFYS2SUI3PJTWXB.SQUARE2.jpg http://cdn.instructables.com/FFY/S2SU/I3PJTWXB/FFYS2SUI3PJTWXB.SQUARE.jpg http://cdn.instructables.com/FFY/S2SU/I3PJTWXB/FFYS2SUI3PJTWXB.SMALL.jpg mgarza10 3d Modeling Swords Clone Trooper Mod HANDCARVED WANDS/VARITAS MAGICAS TALLADAS EN MADERA. Bending, Shaping and Strengthening Foam Armor (Cheap and Easy method) Refurbish an E-Piano: Fix and Polish Broken Keys Talking Caps Lock Key Prank
By: mgarza10

Continue Reading »]]>
Tue, 16 Dec 2014 15:07:15 PST
Headphones Stand http://www.instructables.com/id/Headphones-Stand/
Headphones Stand - More DIY How To Projects]]> http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SQUARE2.jpg http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SQUARE.jpg http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SMALL.jpg The Wood Workshop A super stylish headphone stand that I designed that is both simple to make and works really well. Its can be made with just a band saw or jigsaw and a little sanding. The cable holder is just my my favorite drawer pull as featured in my portafilter instructable. Timber Selection You can use any ...
By: The Wood Workshop

Continue Reading »]]>
Tue, 16 Dec 2014 14:34:46 PST
Woodworking Ideas/Projects http://www.instructables.com/id/Woodworking-IdeasProjects/ http://www.instructables.com/files/deriv/FHU/ZLMX/I3PJSPXB/FHUZLMXI3PJSPXB.SQUARE2.jpg http://www.instructables.com/files/deriv/FHU/ZLMX/I3PJSPXB/FHUZLMXI3PJSPXB.SQUARE.jpg http://www.instructables.com/files/deriv/FHU/ZLMX/I3PJSPXB/FHUZLMXI3PJSPXB.SMALL.jpg JKFrey Ideas to help work on my woodworking skills Make a simple T-light and Joss stick/incense holder This is a neat way to gain some skill at drilling flat holes and drilling at an angle while making a useful item. The Clamping Squares This is a cheap and effective way to help when you need to glue...
By: JKFrey

Continue Reading »]]>
Tue, 16 Dec 2014 10:54:02 PST
Personalized Wooden Key Organizer http://www.instructables.com/id/Wooden-Personalized-Key-Organizer/
Personalized Wooden Key Organizer - More DIY How To Projects]]> http://cdn.instructables.com/FQM/1DW0/I3PJTWMW/FQM1DW0I3PJTWMW.SQUARE2.jpg http://cdn.instructables.com/FQM/1DW0/I3PJTWMW/FQM1DW0I3PJTWMW.SQUARE.jpg http://cdn.instructables.com/FQM/1DW0/I3PJTWMW/FQM1DW0I3PJTWMW.SMALL.jpg DennisPelle This is a key organizer I had made for myself. I was tired of being poked in the legs by my keys everyday and wanted to eliminate the jingle every time I went to open my house door. This project was made with scrap materials I had laying around. (Note: I didn't think to take pics as I was going but ...
By: DennisPelle

Continue Reading »]]>
Tue, 16 Dec 2014 10:46:55 PST
Catapult http://www.instructables.com/id/Catapult-4/
Catapult - More DIY How To Projects]]> http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SQUARE2.jpg http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SQUARE.jpg http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SMALL.jpg JsimsIII MaterialsWood2 pieces each 7 1/2 inches long3 pieces 14 inches long2 pieces 24 inches long1 piece 28 inches long1 piece 10 1/2 inches longOther2 large and strong eye hook20-30 long screws (can use nails but screws are better) not all will be used a cup (this holds your projectile) 4 20-24 (the shor...
By: JsimsIII

Continue Reading »]]>
Tue, 16 Dec 2014 07:36:25 PST
Wooden Bird Lounge http://www.instructables.com/id/Wooden-Bird-Lounge/
Wooden Bird Lounge - More DIY How To Projects]]> http://cdn.instructables.com/FZA/JXV8/I3PJR5DH/FZAJXV8I3PJR5DH.SQUARE2.jpg http://cdn.instructables.com/FZA/JXV8/I3PJR5DH/FZAJXV8I3PJR5DH.SQUARE.jpg http://cdn.instructables.com/FZA/JXV8/I3PJR5DH/FZAJXV8I3PJR5DH.SMALL.jpg jy5739 The Wooden Bird Lounge is a fun and safe way to protect roaming birds from harm. It is carefully designed to withstand outdoor weather temperatures and built durably. The Wooden Bird Lounge has two different levels to it, there is a bottom level that is closed up and has one opening in order to keep...
By: jy5739

Continue Reading »]]>
Tue, 16 Dec 2014 05:32:15 PST
Ultimate Birdhouse http://www.instructables.com/id/Ultimate-Birdhouse/
Ultimate Birdhouse - More DIY How To Projects]]> http://cdn.instructables.com/FDE/WKK2/I3PRRK3R/FDEWKK2I3PRRK3R.SQUARE2.jpg http://cdn.instructables.com/FDE/WKK2/I3PRRK3R/FDEWKK2I3PRRK3R.SQUARE.jpg http://cdn.instructables.com/FDE/WKK2/I3PRRK3R/FDEWKK2I3PRRK3R.SMALL.jpg julian2911 One 5-foot 1- x 6-inch No. 2 pine board 2-inch nails Hammer Hand saw Band sawWood glueCylinder shaped piece of wood Cut out the wood planks as shown in the diagram Use a drill press to cut a 2" diameter hole through the front piece Attach the front and back to the sides using nails ...
By: julian2911

Continue Reading »]]>
Tue, 16 Dec 2014 00:02:30 PST
Frozen Checker Board Box http://www.instructables.com/id/Frozen-Checker-Board-Box/
Frozen Checker Board Box - More DIY How To Projects]]> http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SQUARE2.jpg http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SQUARE.jpg http://cdn.instructables.com/FSG/SE40/I3H5NFH3/FSGSE40I3H5NFH3.SMALL.jpg sporty667 I wanted to build something for my cousins two little girls for Christmas and my dad said make checker board that's what I used to make for family and my mom said do something from frozen. These two little girls love frozen and were even them for Halloween so I started working, first time attempting...
By: sporty667

Continue Reading »]]>
Mon, 15 Dec 2014 16:54:20 PST
The Camera Track and Boom System http://www.instructables.com/id/The-Camera-Track-and-Boom-System/
The Camera Track and Boom System - More DIY How To Projects]]> http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SQUARE2.jpg http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SQUARE.jpg http://cdn.instructables.com/FZ3/WG7I/I3PRNTV4/FZ3WG7II3PRNTV4.SMALL.jpg -BALES- The bulk of work in my shop is custom drum building with Calderwood Percussion, which includes making build videos for our Youtube channel. My shop is roughly 10' x 25' with one central pathway and the tools arranged along the perimeter. Adding an obstacle like a tripod is hindering because it's a...
By: -BALES-

Continue Reading »]]>
Mon, 15 Dec 2014 16:33:04 PST
Spray can rack http://www.instructables.com/id/Spray-can-rack/
Spray can rack - More DIY How To Projects]]> http://cdn.instructables.com/FM1/RIKN/I3PJO60Z/FM1RIKNI3PJO60Z.SQUARE2.jpg http://cdn.instructables.com/FM1/RIKN/I3PJO60Z/FM1RIKNI3PJO60Z.SQUARE.jpg http://cdn.instructables.com/FM1/RIKN/I3PJO60Z/FM1RIKNI3PJO60Z.SMALL.jpg mikeasaurus I keep all my spray paint on a shelf in the workshop. This is usually fine, until I need a spray can way in the back and knock over all the cans in front trying to grab for the one I want. Instead of taking up a lot of valuable shelf space I moved my spray cans to a wall mounted system which allows ...
By: mikeasaurus

Continue Reading »]]>
Mon, 15 Dec 2014 15:52:14 PST
Wooden Fire Pit http://www.instructables.com/id/Wooden-Fire-Pit/
Wooden Fire Pit - More DIY How To Projects]]> http://cdn.instructables.com/FQC/SAB7/I3PRJPIA/FQCSAB7I3PRJPIA.SQUARE2.jpg http://cdn.instructables.com/FQC/SAB7/I3PRJPIA/FQCSAB7I3PRJPIA.SQUARE.jpg http://cdn.instructables.com/FQC/SAB7/I3PRJPIA/FQCSAB7I3PRJPIA.SMALL.jpg JON-A-TRON Manufactured fire pits all look the same. Make your own with hardwood, sheet metal, and off-the-shelf hardware store parts! Design I loved the contradictory idea of making a wood burning fire pit out of wood, so I had to figure out a way to make that work safely. I played around with some cast c...
By: JON-A-TRON

Continue Reading »]]>
Mon, 15 Dec 2014 10:32:30 PST