Instructables: exploring - workshop - bowl http://www.instructables.com Sat, 30 Aug 2014 13:42:37 PDT BLOX v1.01 Cast an Aluminum Bowl! http://www.instructables.com/id/Cast-an-Aluminum-Bowl/
Cast an Aluminum Bowl! - More DIY How To Projects]]> http://cdn.instructables.com/FQH/4GD9/HYHGEGUV/FQH4GD9HYHGEGUV.SQUARE2.jpg http://cdn.instructables.com/FQH/4GD9/HYHGEGUV/FQH4GD9HYHGEGUV.SQUARE.jpg http://cdn.instructables.com/FQH/4GD9/HYHGEGUV/FQH4GD9HYHGEGUV.SMALL.jpg PopsicleGhoul This Instructable will cover the general process I followed to cast an aluminum (or aluminium) bowl, a replica of a glass kitchen bowl. This is the story of scrap aluminum, melted to a complete liquid, and remade into something awesomely new. My guide will not go into great detail as to the constr...
By: PopsicleGhoul

Continue Reading »]]>
Wed, 6 Aug 2014 08:00:24 PDT
Experimenting with 'wood silicone' http://www.instructables.com/id/Experimenting-with-wood-silicone/
Experimenting with 'wood silicone' - More DIY How To Projects]]> http://cdn.instructables.com/FQ6/B7RG/HXDJJK2I/FQ6B7RGHXDJJK2I.SQUARE2.jpg http://cdn.instructables.com/FQ6/B7RG/HXDJJK2I/FQ6B7RGHXDJJK2I.SQUARE.jpg http://cdn.instructables.com/FQ6/B7RG/HXDJJK2I/FQ6B7RGHXDJJK2I.SMALL.jpg Joekevdv With a group of four art students, we were challenged to develop a new kind of material. Together we researched silicone rubber and we decided to use this material as a starting point. After a lot of experiments we discovered that mixing silicone rubber with sawdust made the silicone rubber much mor...
By: Joekevdv

Continue Reading »]]>
Tue, 8 Jul 2014 11:44:32 PDT
2x4 Dinner http://www.instructables.com/id/2x4-Dinner/
2x4 Dinner - More DIY How To Projects]]> http://cdn.instructables.com/FWE/60IN/HVCUTQCS/FWE60INHVCUTQCS.SQUARE2.jpg http://cdn.instructables.com/FWE/60IN/HVCUTQCS/FWE60INHVCUTQCS.SQUARE.jpg http://cdn.instructables.com/FWE/60IN/HVCUTQCS/FWE60INHVCUTQCS.SMALL.jpg kludge77 When is a 2x4 not a 2x4? When its a dinner setting for 2. 2 bowls, 2 plates, 2 cups ,2 napkin rings & roughly 400 splinters...
By: kludge77

Continue Reading »]]>
Mon, 19 May 2014 21:54:25 PDT
Tobacco pipe making http://www.instructables.com/id/Tobacco-pipe-making/
Tobacco pipe making - More DIY How To Projects]]> http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SQUARE2.jpg http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SQUARE.jpg http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SMALL.jpg ElmarsM Hey! First of all I wanted to say, that I'm from Latvia, so I'm sorry for my english. This is a quite detailed, step-by-step instructable about pipe making. I am not a professional, I just wanted to try my skills. First step is to choose the wood for your pipe. In my case the most suitable w...
By: ElmarsM

Continue Reading »]]>
Sun, 27 Apr 2014 10:12:54 PDT
NATURAL EDGE BOWL http://www.instructables.com/id/NATURAL-EDGE-BOWL/ http://cdn.instructables.com/FT0/HIMI/HUBJBXU5/FT0HIMIHUBJBXU5.SQUARE2.jpg http://cdn.instructables.com/FT0/HIMI/HUBJBXU5/FT0HIMIHUBJBXU5.SQUARE.jpg http://cdn.instructables.com/FT0/HIMI/HUBJBXU5/FT0HIMIHUBJBXU5.SMALL.jpg glassman15201 Here is a natural edge bowl and "I made it at the TechShop". And you can make one there also. I started with a crotch of cherry wood that I could not use in my wood. I knew it was from the fall cut and that would work great for an edge bowl. I first mounted it on the lathe the same as a spindle bet...
By: glassman15201

Continue Reading »]]>
Tue, 22 Apr 2014 15:45:26 PDT
Plywood Bowl http://www.instructables.com/id/Plywood-Bowl/
Plywood Bowl - More DIY How To Projects]]> http://cdn.instructables.com/F2L/E9DF/HU1RQP9S/F2LE9DFHU1RQP9S.SQUARE2.jpg http://cdn.instructables.com/F2L/E9DF/HU1RQP9S/F2LE9DFHU1RQP9S.SQUARE.jpg http://cdn.instructables.com/F2L/E9DF/HU1RQP9S/F2LE9DFHU1RQP9S.SMALL.jpg glassman15201 This is another in my series of test bowls that "I made it at TechShop". I have been working on things to use to build up a bowl. I hope you enjoy the process. www.techshop.ws Parts So here are the parts to make the bowl. I did not measure these that are to be quick. But cut the plywood into squ...
By: glassman15201

Continue Reading »]]>
Wed, 16 Apr 2014 10:58:51 PDT
how to make a fireplace / BBQ out of steel http://www.instructables.com/id/how-to-make-a-fireplace-BBQ-out-of-steel/
how to make a fireplace / BBQ out of steel - More DIY How To Projects]]> http://cdn.instructables.com/F80/RGCO/HOUFXFQJ/F80RGCOHOUFXFQJ.SQUARE2.jpg http://cdn.instructables.com/F80/RGCO/HOUFXFQJ/F80RGCOHOUFXFQJ.SQUARE.jpg http://cdn.instructables.com/F80/RGCO/HOUFXFQJ/F80RGCOHOUFXFQJ.SMALL.jpg hukkitorte This is how to make a nice big firebowl for a BBQ really fast in the workshop.. The Bowl Get a nice top of a boiler.. (sometimes scrapyards have them lying around).This time I bought one, was about 100€. 800mm in diameter and 6mm thickness Find the center Find the exact center and drill a hole...
By: hukkitorte

Continue Reading »]]>
Sat, 7 Dec 2013 08:38:05 PST
Easy Homemade Wooden Tea Cup Without A Lath http://www.instructables.com/id/Easy-Homemade-Wooden-Tea-Cup-Without-A-Lathe/
Easy Homemade Wooden Tea Cup Without A Lath - More DIY How To Projects]]> http://cdn.instructables.com/F0M/2G7X/HNM44L77/F0M2G7XHNM44L77.SQUARE2.jpg http://cdn.instructables.com/F0M/2G7X/HNM44L77/F0M2G7XHNM44L77.SQUARE.jpg http://cdn.instructables.com/F0M/2G7X/HNM44L77/F0M2G7XHNM44L77.SMALL.jpg mulrich125 Hey everyone so here's just a quick instructable about how I made this teacup without using a lathe. All I used was a drill a sand belt and sand paper. Enjoy! Edit: Thanks so much for the feature on my first instructable! Have fun trying it out! :) Getting Your Wood If you look at my finished pro...
By: mulrich125

Continue Reading »]]>
Tue, 5 Nov 2013 17:41:18 PST
How to Make Wooden Bowls Using Your Bandsaw http://www.instructables.com/id/How-to-Make-Wooden-Bowls-Using-Your-Bandsaw/
How to Make Wooden Bowls Using Your Bandsaw - More DIY How To Projects]]> http://cdn.instructables.com/FSL/7TLG/HMMF1LNO/FSL7TLGHMMF1LNO.SQUARE2.jpg http://cdn.instructables.com/FSL/7TLG/HMMF1LNO/FSL7TLGHMMF1LNO.SQUARE.jpg http://cdn.instructables.com/FSL/7TLG/HMMF1LNO/FSL7TLGHMMF1LNO.SMALL.jpg rschoenm I'll show you how make round wooden bowls from strips of wood and a bandsaw. I don't have a wood lathe, so I found a way to create round bowls using my bandsaw. You can make them any diameter 3 inches and up. The pictures show a few of the bowls I made from mesquite wood. My instructions will get yo...
By: rschoenm

Continue Reading »]]>
Tue, 5 Nov 2013 12:21:39 PST
Pear Bowl http://www.instructables.com/id/Pear-Bowl/ http://cdn.instructables.com/FR6/IBDE/HLO24S6X/FR6IBDEHLO24S6X.SQUARE2.jpg http://cdn.instructables.com/FR6/IBDE/HLO24S6X/FR6IBDEHLO24S6X.SQUARE.jpg http://cdn.instructables.com/FR6/IBDE/HLO24S6X/FR6IBDEHLO24S6X.SMALL.jpg kludge77 This is a small hunk of pear crotch with a large crack and exposed bark. The wood was from a co-workers fallen pear tree. I took the whole thing and will have pear projects for many moons. The green wood was rough turned in July, it has dried enough for a final turning. Totally size was about 7" o...
By: kludge77

Continue Reading »]]>
Mon, 16 Sep 2013 15:17:52 PDT
Staves (duelas) http://www.instructables.com/id/Staves-duelas/
Staves (duelas) - More DIY How To Projects]]> http://cdn.instructables.com/F4M/2H1M/HJKBSPRL/F4M2H1MHJKBSPRL.SQUARE2.jpg http://cdn.instructables.com/F4M/2H1M/HJKBSPRL/F4M2H1MHJKBSPRL.SQUARE.jpg http://cdn.instructables.com/F4M/2H1M/HJKBSPRL/F4M2H1MHJKBSPRL.SMALL.jpg rimar2000 Hace unas semanas intenté hacer en mi torno un recipiente aproximadamente cilíndrico, y me dio mucho trabajo ahuecarlo. Terminé rompiendo sin querer la pieza de madera, y aunque traté de recuperarla, no quedó bien. Mientras trabajaba en ella, se me ocurrió que sería una buena idea partir de una pie...
By: rimar2000

Continue Reading »]]>
Tue, 30 Jul 2013 20:53:56 PDT
My first Guksi (or Finnish: Kuksa; Swedish: Kåsa) http://www.instructables.com/id/My-first-Guksi-or-Finnish-Kuksa-Swedish-Ksa/ http://cdn.instructables.com/F27/JLVB/HF23R3YQ/F27JLVBHF23R3YQ.SQUARE2.jpg http://cdn.instructables.com/F27/JLVB/HF23R3YQ/F27JLVBHF23R3YQ.SQUARE.jpg http://cdn.instructables.com/F27/JLVB/HF23R3YQ/F27JLVBHF23R3YQ.SMALL.jpg balu92 First of all: I am pretty bad in English :) It wasn't planned to put my little project online, so forgive also the bad pictures. This is for inspiration: Some Details: Wood: Birch (no burl) Kuksa: Guksi (or Finnish: kuksa; Swedish: kåsa) is a type of drinking cup traditionally duodji crafted by ...
By: balu92

Continue Reading »]]>
Mon, 8 Apr 2013 13:19:32 PDT
Multi-functional ductape bowl. http://www.instructables.com/id/Multi-functional-ductape-bowl/
Multi-functional ductape bowl. - More DIY How To Projects]]> http://cdn.instructables.com/FX9/FWM0/HDOWARZC/FX9FWM0HDOWARZC.SQUARE2.jpg http://cdn.instructables.com/FX9/FWM0/HDOWARZC/FX9FWM0HDOWARZC.SQUARE.jpg http://cdn.instructables.com/FX9/FWM0/HDOWARZC/FX9FWM0HDOWARZC.SMALL.jpg Bauwser This little bowl (or big, that depends on what you need) is made from an empty roll of ductape and some ductape offcourse. Its very simple and can have many uses, plus it is disposable (but can also be re-used in some cases) and it takes less than 5 minutes to create. Necessities: Empty ductape ro...
By: Bauwser

Continue Reading »]]>
Tue, 5 Mar 2013 08:49:00 PST
Cherry bowl http://www.instructables.com/id/Cherry-bowl/ http://cdn.instructables.com/FME/T5WT/HCB8KRGS/FMET5WTHCB8KRGS.SQUARE2.jpg http://cdn.instructables.com/FME/T5WT/HCB8KRGS/FMET5WTHCB8KRGS.SQUARE.jpg http://cdn.instructables.com/FME/T5WT/HCB8KRGS/FMET5WTHCB8KRGS.SMALL.jpg fasaxc Had a good time on the lathe yesterday. I turned this bowl from cherry. My first try at a decorative rim went quite well and I was pretty happy with the shape. Unlike the previous two bowls that I attempted out of zebrawood, it neither smells bad (zebrawood smells like cheese), nor did it explode a...
By: fasaxc

Continue Reading »]]>
Sun, 27 Jan 2013 15:50:41 PST
Lathe turned plastic bowl http://www.instructables.com/id/Lathe-turned-plastic-bowl/
Lathe turned plastic bowl - More DIY How To Projects]]> http://cdn.instructables.com/FYE/RJM9/HBFFJQHH/FYERJM9HBFFJQHH.SQUARE2.jpg http://cdn.instructables.com/FYE/RJM9/HBFFJQHH/FYERJM9HBFFJQHH.SQUARE.jpg http://cdn.instructables.com/FYE/RJM9/HBFFJQHH/FYERJM9HBFFJQHH.SMALL.jpg SlickSqueegie I found a bunch of this plastic in different shapes and sizes. Im not sure what the technical name for it is, but I have seen it used in many jigs at machine shops. I posted a forum topic questioning what it is here. I had to try making a bowl. Chuck it up on your lathe This piece already had ...
By: SlickSqueegie

Continue Reading »]]>
Fri, 11 Jan 2013 11:51:53 PST
Segmented Turning Blank (for bowls and cups) http://www.instructables.com/id/Segmented-Turning-Blank-for-bowls-and-cups/
Segmented Turning Blank (for bowls and cups) - More DIY How To Projects]]> http://cdn.instructables.com/F8Z/6L6J/HA4M8DN1/F8Z6L6JHA4M8DN1.SQUARE2.jpg http://cdn.instructables.com/F8Z/6L6J/HA4M8DN1/F8Z6L6JHA4M8DN1.SQUARE.jpg http://cdn.instructables.com/F8Z/6L6J/HA4M8DN1/F8Z6L6JHA4M8DN1.SMALL.jpg JoeGadget Decorative cups and bowls can be made on a woodturning lathe, and are often made out of a single block of wood (or a straightforward laminated block of wood).  For a more complex appearance, try a segmented wood turning.  In a segmented turning, the turning blank is made out of a series of stacked w...
By: JoeGadget

Continue Reading »]]>
Wed, 5 Dec 2012 19:38:11 PST
recycle pallet wood into turned art http://www.instructables.com/id/recycle-pallet-wood-into-turned-art/
recycle pallet wood into turned art - More DIY How To Projects]]> http://cdn.instructables.com/F72/WOVC/H9T4QX8R/F72WOVCH9T4QX8R.SQUARE2.jpg http://cdn.instructables.com/F72/WOVC/H9T4QX8R/F72WOVCH9T4QX8R.SQUARE.jpg http://cdn.instructables.com/F72/WOVC/H9T4QX8R/F72WOVCH9T4QX8R.SMALL.jpg montana mindsmith this instructable is about how to take a chunk of pallet wood and turn it into a bowl/vessel on a lathe.  this is not a "how to turn" instructable; there are lots of those out there as well as plenty on how to build your own lathe if you don't have one.  this is simply one way i like to re-use palle...
By: montana mindsmith

Continue Reading »]]>
Tue, 27 Nov 2012 18:38:54 PST
Wooden Bowl http://www.instructables.com/id/Wooden-Bowl/ http://cdn.instructables.com/FT3/0PMK/H7S4ZVSS/FT30PMKH7S4ZVSS.SQUARE2.jpg http://cdn.instructables.com/FT3/0PMK/H7S4ZVSS/FT30PMKH7S4ZVSS.SQUARE.jpg http://cdn.instructables.com/FT3/0PMK/H7S4ZVSS/FT30PMKH7S4ZVSS.SMALL.jpg SelkeyMoonbeam This is just a photo instructable to show off the pretty bowl I made on a wood lathe. It's not a step-by-step because as far as wood-lathe-bowl projects go, it's pretty basic- if you know the principles (which you should learn from someone in person if you can), I'm sure you can produce a similar r...
By: SelkeyMoonbeam

Continue Reading »]]>
Mon, 1 Oct 2012 21:16:18 PDT
Turned bowl and apple http://www.instructables.com/id/Turned-bowl-and-apple/ http://cdn.instructables.com/FBJ/NS4A/H742FHSB/FBJNS4AH742FHSB.SQUARE2.jpg http://cdn.instructables.com/FBJ/NS4A/H742FHSB/FBJNS4AH742FHSB.SQUARE.jpg http://cdn.instructables.com/FBJ/NS4A/H742FHSB/FBJNS4AH742FHSB.SMALL.jpg fasaxc I made this turned bowl and apple at Techshop, San Francisco using the wood lathe. The bowl is cherry.  The apple is soft maple with a walnut stalk, which I also turned.  The best way to learn to make either is to take a class and then search for turning videos on youtube.  The cuts for making a bo...
By: fasaxc

Continue Reading »]]>
Thu, 20 Sep 2012 19:08:58 PDT
From Blank to Bowl http://www.instructables.com/id/From-Blank-to-Bowl/
From Blank to Bowl - More DIY How To Projects]]> http://cdn.instructables.com/F2K/578N/H2ULR4LN/F2K578NH2ULR4LN.SQUARE2.jpg http://cdn.instructables.com/F2K/578N/H2ULR4LN/F2K578NH2ULR4LN.SQUARE.jpg http://cdn.instructables.com/F2K/578N/H2ULR4LN/F2K578NH2ULR4LN.SMALL.jpg frankenboom Wooden bowls are beautiful and easy to make because they come straight from a log. There isn't any cutting or gluing, so the natural beauty of the wood can shine. Once you figure out how to use the lathe tools properly, it's really satisfying to watch the shavings pile up by your feet. First, you ne...
By: frankenboom

Continue Reading »]]>
Mon, 4 Jun 2012 14:43:47 PDT
Make a bowl out of a log part 1 http://www.instructables.com/id/Make-a-bowl-out-of-a-log-part-1/
Make a bowl out of a log part 1 - More DIY How To Projects]]> http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SQUARE2.jpg http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SQUARE.jpg http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SMALL.jpg SlickSqueegie The only thing I like better than turning bowls out of wood, is turning bowls out of free wood! Throuought the summer trees fall down. Im constantly looking for nice pieces carelessly thrown out.  The only bad part about it is they are always wet. Wood has a high percentage of water stored in the tr...
By: SlickSqueegie

Continue Reading »]]>
Fri, 23 Mar 2012 17:26:58 PDT
Wine Barrel fruit bowl http://www.instructables.com/id/Wine-Barrel-fruit-bowl/
Wine Barrel fruit bowl - More DIY How To Projects]]> http://cdn.instructables.com/FR4/Y066/GYGGJ28S/FR4Y066GYGGJ28S.SQUARE2.jpg http://cdn.instructables.com/FR4/Y066/GYGGJ28S/FR4Y066GYGGJ28S.SQUARE.jpg http://cdn.instructables.com/FR4/Y066/GYGGJ28S/FR4Y066GYGGJ28S.SMALL.jpg liquidhandwash This is the fruit bowl I made from wine barrel planks, the red stain on the inside of the bowl is from the red wine that used to be inside the barrel. Stuff you will need After making the wine barrel beer table, I spent I long time sitting and thinking on a  pile of oak barrel planks which are cu...
By: liquidhandwash

Continue Reading »]]>
Sun, 12 Feb 2012 02:19:10 PST
Making a Pipe (Part 1): The Stummel http://www.instructables.com/id/Making-a-Pipe-Part-1-The-Stummel/
Making a Pipe (Part 1): The Stummel - More DIY How To Projects]]> http://cdn.instructables.com/FTJ/FQOG/GY4RAINS/FTJFQOGGY4RAINS.SQUARE2.jpg http://cdn.instructables.com/FTJ/FQOG/GY4RAINS/FTJFQOGGY4RAINS.SQUARE.jpg http://cdn.instructables.com/FTJ/FQOG/GY4RAINS/FTJFQOGGY4RAINS.SMALL.jpg shakezula Edited to add: Hey y'all, Thanks so much for the wonderful comments and positive feedback on this tutorial! I was not expecting such a warm reception, and I'm very glad that people have found this useful and enjoyable. While I have to acknowledge that the pipes I've made and share in the following p...
By: shakezula

Continue Reading »]]>
Sun, 5 Feb 2012 20:47:44 PST
Hand Bowl http://www.instructables.com/id/Hand-Bowl/
Hand Bowl - More DIY How To Projects]]> http://cdn.instructables.com/F4D/LFEA/GXFXNFMM/F4DLFEAGXFXNFMM.SQUARE2.jpg http://cdn.instructables.com/F4D/LFEA/GXFXNFMM/F4DLFEAGXFXNFMM.SQUARE.jpg http://cdn.instructables.com/F4D/LFEA/GXFXNFMM/F4DLFEAGXFXNFMM.SMALL.jpg PenfoldPlant Here's a small bowl I made from interlocking layers of birch plywood. I designed it using Poser, Blender and Autodesk 123D Make, then used a laser cutter to precisely cut all 40 of the pieces. The bowl stands at about a foot in height and, despite being very light, is sturdy and extremely well bala...
By: PenfoldPlant

Continue Reading »]]>
Tue, 10 Jan 2012 12:47:32 PST
Segmented Salad Bowl Maple and Walnut http://www.instructables.com/id/Segmented-Salad-Bowl-Maple-and-Walnut/
Segmented Salad Bowl Maple and Walnut - More DIY How To Projects]]> http://cdn.instructables.com/F7L/19CY/GWF6ESX8/F7L19CYGWF6ESX8.SQUARE2.jpg http://cdn.instructables.com/F7L/19CY/GWF6ESX8/F7L19CYGWF6ESX8.SQUARE.jpg http://cdn.instructables.com/F7L/19CY/GWF6ESX8/F7L19CYGWF6ESX8.SMALL.jpg SlickSqueegie Hello everyone,  this is my 12th bowl that I have "successfully" completed and my 2nd segmented bowl. I made it for my Fathers nurse for a Christmas present. Im am pretty proud of this one as it is the finest piece I have made thus far. This one was a lot of fun. enjoy. Lathes are very dangerous an...
By: SlickSqueegie

Continue Reading »]]>
Tue, 27 Dec 2011 19:07:41 PST
How to sharpen lathe chisels http://www.instructables.com/id/How-to-sharpening-lathe-chisels/
How to sharpen lathe chisels - More DIY How To Projects]]> http://cdn.instructables.com/FWC/KGCG/GV9SPK6J/FWCKGCGGV9SPK6J.SQUARE2.jpg http://cdn.instructables.com/FWC/KGCG/GV9SPK6J/FWCKGCGGV9SPK6J.SQUARE.jpg http://cdn.instructables.com/FWC/KGCG/GV9SPK6J/FWCKGCGGV9SPK6J.SMALL.jpg jskingry Anyone who has had a lathe for more than a week knows that you need to sharpen your chisels and sharpen then often.  Nothing dulls tool steel like a 3000rpm spinning chunk of wood.  I have recently gotten back into wood turning after a ten year break from it so I am revisiting my sharpening techniqu...
By: jskingry

Continue Reading »]]>
Sat, 26 Nov 2011 14:50:27 PST
Easy to make concrete bowls and planters... http://www.instructables.com/id/Easy-to-make-concrete-bowls-and-planters/
Easy to make concrete bowls and planters... - More DIY How To Projects]]> http://cdn.instructables.com/FDG/NCTS/GQZJN3JV/FDGNCTSGQZJN3JV.SQUARE2.jpg http://cdn.instructables.com/FDG/NCTS/GQZJN3JV/FDGNCTSGQZJN3JV.SQUARE.jpg http://cdn.instructables.com/FDG/NCTS/GQZJN3JV/FDGNCTSGQZJN3JV.SMALL.jpg WUVIE For a quick, fun and very easy garden project, grab a bag of concrete, your imagination, and follow me! Concrete planters and garden ornamentation are a wonderful addition to the outdoor setting around one's home. Often, such decor comes with a high price, enormous size and incredible weight whic...
By: WUVIE

Continue Reading »]]>
Sat, 6 Aug 2011 15:03:40 PDT
Wood Turnings http://www.instructables.com/id/Wood-Turnings/ http://cdn.instructables.com/FP3/77W7/GL4Z6JRJ/FP377W7GL4Z6JRJ.SQUARE2.jpg http://cdn.instructables.com/FP3/77W7/GL4Z6JRJ/FP377W7GL4Z6JRJ.SQUARE.jpg http://cdn.instructables.com/FP3/77W7/GL4Z6JRJ/FP377W7GL4Z6JRJ.SMALL.jpg hackmattr I have been working with wood since I was Eleven years old. I started using a lathe when I was fourteen and the pictures above are of some of the turnings I have made.   Spalted Maple Goblet- The first two pictures are of a Captive Ring Goblet made from Spalted Maple. The Captive ring is around the...
By: hackmattr

Continue Reading »]]>
Sun, 13 Mar 2011 21:31:21 PDT
bent wood hand-shaped bowl http://www.instructables.com/id/bent-wood-hand-shaped-bowl/
bent wood hand-shaped bowl - More DIY How To Projects]]> http://cdn.instructables.com/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SQUARE2.jpg http://cdn.instructables.com/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SQUARE.jpg http://cdn.instructables.com/FXX/J3SE/GHFK0QEZ/FXXJ3SEGHFK0QEZ.SMALL.jpg mikeasaurus Give yourself a helping hand, with some hand-shaped bowls. Made for keeping your everyday carrying things in one place when you're at home; dump your keys, phone, coins and other sundries into a pair of open hands to keep them safe. Place this hands near your front door or coffee table you're sure t...
By: mikeasaurus

Continue Reading »]]>
Tue, 14 Dec 2010 10:39:44 PST
How to make a bowl from a flat plank http://www.instructables.com/id/How-to-make-a-bowl-from-a-flat-plank/
How to make a bowl from a flat plank - More DIY How To Projects]]> http://cdn.instructables.com/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SQUARE2.jpg http://cdn.instructables.com/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SQUARE.jpg http://cdn.instructables.com/FEI/8RZH/GB3W2AU4/FEI8RZHGB3W2AU4.SMALL.jpg Jor2daje This instructable will show how to make a bowl from a single plank of wood, using only a jig saw and wood glue, the bowl could be mounted on a lathe to clean it up but is not necessary. This is a great way to get a nice large bowl from a cheap piece of wood. materials Materials and Tools: -jig ...
By: Jor2daje

Continue Reading »]]>
Sun, 4 Jul 2010 21:05:42 PDT
Paper towel stand. http://www.instructables.com/id/Paper-towel-stand/
Paper towel stand. - More DIY How To Projects]]> http://cdn.instructables.com/FIC/T28J/GA1BGC6D/FICT28JGA1BGC6D.SQUARE2.jpg http://cdn.instructables.com/FIC/T28J/GA1BGC6D/FICT28JGA1BGC6D.SQUARE.jpg http://cdn.instructables.com/FIC/T28J/GA1BGC6D/FICT28JGA1BGC6D.SMALL.jpg Computothought Again Mr. Cheapo here is looking for ways of doing things without spending a lot of money. Tis is another coat hanger creation. Nice because I did not want to hang anything on the wall, have something that was not disposable or not easily transportable. Try this at your own risk. Slight chance of ey...
By: Computothought

Continue Reading »]]>
Sat, 5 Jun 2010 00:54:44 PDT
Oil lamp with three matches http://www.instructables.com/id/Oil-lamp-with-three-matches/
Oil lamp with three matches - More DIY How To Projects]]> http://cdn.instructables.com/F1F/VVWD/G3W8QR7H/F1FVVWDG3W8QR7H.SQUARE2.jpg http://cdn.instructables.com/F1F/VVWD/G3W8QR7H/F1FVVWDG3W8QR7H.SQUARE.jpg http://cdn.instructables.com/F1F/VVWD/G3W8QR7H/F1FVVWDG3W8QR7H.SMALL.jpg steam_cannon You can make an oil lamp from just three matches. This is also a good way to recycle used cooking oil. Most oils will burn well in this type of oil lamp and three matches tends to be the magic number to get a good lasting flame. What you need are: 1.  A book of paper matches. 2. A piece of wire, ...
By: steam_cannon

Continue Reading »]]>
Fri, 1 Jan 2010 09:23:16 PST
Foreclosure Bowl http://www.instructables.com/id/Foreclosure-Bowl/
Foreclosure Bowl - More DIY How To Projects]]> http://cdn.instructables.com/FBV/M8QI/FXXPL8M4/FBVM8QIFXXPL8M4.SQUARE2.jpg http://cdn.instructables.com/FBV/M8QI/FXXPL8M4/FBVM8QIFXXPL8M4.SQUARE.jpg http://cdn.instructables.com/FBV/M8QI/FXXPL8M4/FBVM8QIFXXPL8M4.SMALL.jpg wholman Pushed by unfolding events, a crop of "For Sale" signs has been popping up all over the country this summer; selling houses, boats, cars, motorcycles, RVs, and many other things. A lot of these signs are made from thin sheet steel or aluminum. One might inquire on Craigslist about possible used si...
By: wholman

Continue Reading »]]>
Wed, 5 Aug 2009 09:13:52 PDT
How to Replace a Toilet http://www.instructables.com/id/How-to-Replace-a-Toilet/
How to Replace a Toilet - More DIY How To Projects]]> http://cdn.instructables.com/FXI/ESMN/FM7WGPVW/FXIESMNFM7WGPVW.SQUARE2.jpg http://cdn.instructables.com/FXI/ESMN/FM7WGPVW/FXIESMNFM7WGPVW.SQUARE.jpg http://cdn.instructables.com/FXI/ESMN/FM7WGPVW/FXIESMNFM7WGPVW.SMALL.jpg taskmapper This article will explain the step by step process involved in removing a old toilet and replacing to with a new one.Toilet Replacement TaskMap - Click to see full size pictures Original source of this article. Shared with permission Shut off the water supply Turn the supply valve clockwiseThing ...
By: taskmapper

Continue Reading »]]>
Tue, 14 Oct 2008 08:42:36 PDT
Simple Plate Display Stand http://www.instructables.com/id/Simple-Plate-Display-Stand/
Simple Plate Display Stand - More DIY How To Projects]]> http://cdn.instructables.com/FU3/O0M0/FFKCQBKY/FU3O0M0FFKCQBKY.SQUARE2.jpg http://cdn.instructables.com/FU3/O0M0/FFKCQBKY/FU3O0M0FFKCQBKY.SQUARE.jpg http://cdn.instructables.com/FU3/O0M0/FFKCQBKY/FU3O0M0FFKCQBKY.SMALL.jpg jeff-o My wife and I recently visited the Dominican Republic, and returned with quite a few souvenirs - among them, a set of five colourful decorative plates. We needed a way to display them, so I created some simple and easy to make display stands with some wood I had sitting around. They turned out wel...
By: jeff-o

Continue Reading »]]>
Thu, 28 Aug 2008 08:38:10 PDT
Wood Shop Projects http://www.instructables.com/id/Wood-Shop-Projects/ http://cdn.instructables.com/FC0/7HIC/FFRCP008/FC07HICFFRCP008.SQUARE2.jpg http://cdn.instructables.com/FC0/7HIC/FFRCP008/FC07HICFFRCP008.SQUARE.jpg http://cdn.instructables.com/FC0/7HIC/FFRCP008/FC07HICFFRCP008.SMALL.jpg MadMechanicMike Here are just a few things I have made over the past 4 years in my woods class at school. A lot of the projects were made in under 2 hours. Unfortunately, our school uses very old machines that don't work so well so I spend most of my time on the lathe. Since its the end of school for me (graduation...
By: MadMechanicMike

Continue Reading »]]>
Fri, 2 May 2008 19:45:46 PDT
My first woodturning project(s) http://www.instructables.com/id/My-first-woodturning-projects/ http://cdn.instructables.com/FG0/K7QC/FFNEHNVK/FG0K7QCFFNEHNVK.SQUARE2.jpg http://cdn.instructables.com/FG0/K7QC/FFNEHNVK/FG0K7QCFFNEHNVK.SQUARE.jpg http://cdn.instructables.com/FG0/K7QC/FFNEHNVK/FG0K7QCFFNEHNVK.SMALL.jpg Patrik So I took this weekend woodturning class at The Crucible in West Oakland, and here's what I made. This is actually my very first woodworking project ever. Needless to say, I'm quite happy with the results.(The Crucible is a really cool place, by the way - they do lots of classes for youth and adults...
By: Patrik

Continue Reading »]]>
Fri, 2 May 2008 14:44:19 PDT