http://www.instructables.com Sat, 25 May 2013 23:57:02 PDT BLOX v1.01 http://www.instructables.com/id/Remove-the-front-clip-from-your-1979-Camaro/
Remove the front clip from your 1979 Camaro - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SQUARE2.jpg http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SQUARE.jpg http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SMALL.jpg Skylberg If you are doing some serious repairs this may be worth your while.  This will help you remove the front clip in one piece.  The front fenders, hood, inner fenders, radiator support, front bumper, radiator, condenser and front end will all come off in one piece.  What you will need 3/8" socket 1...
By: Skylberg

Continue Reading »]]> Tue, 30 Apr 2013 08:48:15 PDT http://www.instructables.com/id/Removing-Rust-or-How-to-Fix-a-Red-Brick/
Removing Rust or How to Fix a Red Brick - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5R/TGIJ/HFD1KNWU/F5RTGIJHFD1KNWU.SQUARE2.jpg http://www.instructables.com/files/deriv/F5R/TGIJ/HFD1KNWU/F5RTGIJHFD1KNWU.SQUARE.jpg http://www.instructables.com/files/deriv/F5R/TGIJ/HFD1KNWU/F5RTGIJHFD1KNWU.SMALL.jpg Roninofthewest I have tried everything when it comes to rust removal. Chemicals make your shop smell funny, and can destroy a concrete floor. Sand blasting turns your workspace into a beach, and is way to harsh on metal for what I do. Today I will show you how to use a very simple houshold item to bring your "red ...
By: Roninofthewest

Continue Reading »]]> Wed, 17 Apr 2013 13:01:58 PDT http://www.instructables.com/id/SACHS-MOPED-CLUTCH-REMOVAL/
SACHS MOPED CLUTCH REMOVAL - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAM/39TD/HAQ30864/FAM39TDHAQ30864.SQUARE2.jpg http://www.instructables.com/files/deriv/FAM/39TD/HAQ30864/FAM39TDHAQ30864.SQUARE.jpg http://www.instructables.com/files/deriv/FAM/39TD/HAQ30864/FAM39TDHAQ30864.SMALL.jpg droidy_pendejo Need to remove the clutch from your Sachs moped motor? It's no biggie. Grab a wrench and follow along..... I'll show you how to do it. I made it at Techshop. The have a work bay where you can work on your car, motorcycle, moped... whatever! There are 3 of them around the SF Bay Area, so it's pret...
By: droidy_pendejo

Continue Reading »]]> Wed, 9 Jan 2013 08:00:25 PST http://www.instructables.com/id/Pull-a-Car-Dent-Using-a-Telephone-Pole/ http://www.instructables.com/files/deriv/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SQUARE2.jpg http://www.instructables.com/files/deriv/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SQUARE.jpg http://www.instructables.com/files/deriv/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SMALL.jpg hackmattr I bought a car with a major dent on the driver side rear quarter panel and rear door. Instead of buying a door panel and quarter panel, I decided to pull the dent. Using a slide hammer and stud welder was not the best method for this dent removal (Spent a couple days pulling it this way). Seeing n...
By: hackmattr

Continue Reading »]]> Sat, 22 Dec 2012 01:04:20 PST http://www.instructables.com/id/How-to-remove-window-tint-for-under-30/
How to remove window tint for under $30 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFM/EVGN/H9K2FZ7J/FFMEVGNH9K2FZ7J.SQUARE2.jpg http://www.instructables.com/files/deriv/FFM/EVGN/H9K2FZ7J/FFMEVGNH9K2FZ7J.SQUARE.jpg http://www.instructables.com/files/deriv/FFM/EVGN/H9K2FZ7J/FFMEVGNH9K2FZ7J.SMALL.jpg GrimWarhawk In this instructable, I'll cover how to remove window tinting from your car windows.  It takes about 5 minutes for side windows and 15 for a rear window. Let's get started! Gather Your Supplies You're going to need some stuff. 1 - Razor Blade ($1 for a 5 pack) 1 - Upholstery Steamer ($29 at the...
By: GrimWarhawk

Continue Reading »]]> Mon, 19 Nov 2012 14:15:06 PST http://www.instructables.com/id/Removing-Tar-from-Fiberglass/ http://www.instructables.com/files/deriv/FV1/SSTA/HC9MJASG/FV1SSTAHC9MJASG.SQUARE2.jpg http://www.instructables.com/files/deriv/FV1/SSTA/HC9MJASG/FV1SSTAHC9MJASG.SQUARE.jpg http://www.instructables.com/files/deriv/FV1/SSTA/HC9MJASG/FV1SSTAHC9MJASG.SMALL.jpg audreyobscura I have just begun the restoration process of my tiny fiberglass trailer. When I pulled the windows off of the hull, there was this tar-based weather stripping sealing the window from the elements. I knew that if I was to replace the windows at any point, I would have to replace the weather stripping...
By: audreyobscura

Continue Reading »]]> Mon, 15 Oct 2012 16:14:38 PDT http://www.instructables.com/id/FELCO-7-Pruner-Rebuild-E-Z-Shock-Absorber-Replac/ http://www.instructables.com/files/deriv/FTN/VPER/GTMP7XAN/FTNVPERGTMP7XAN.SQUARE2.jpg http://www.instructables.com/files/deriv/FTN/VPER/GTMP7XAN/FTNVPERGTMP7XAN.SQUARE.jpg http://www.instructables.com/files/deriv/FTN/VPER/GTMP7XAN/FTNVPERGTMP7XAN.SMALL.jpg DaveTheC The Felco 7 pruner is a great tool, but after 10 years, I had to break it down and rebuild it with new blade, anvil and other parts. Still cheaper than buying new! The hardest part to replace was the Shock Absorber pad.  It is a flat-conical rubber pad embedded in a hole. You cannot grab it. Felco ...
By: DaveTheC

Continue Reading »]]> Tue, 11 Oct 2011 16:50:42 PDT http://www.instructables.com/id/Juniper-and-Large-Stump-Removal/ http://www.instructables.com/files/deriv/FSG/V4X9/GQZJMS5M/FSGV4X9GQZJMS5M.SQUARE2.jpg http://www.instructables.com/files/deriv/FSG/V4X9/GQZJMS5M/FSGV4X9GQZJMS5M.SQUARE.jpg http://www.instructables.com/files/deriv/FSG/V4X9/GQZJMS5M/FSGV4X9GQZJMS5M.SMALL.jpg jkalter Stumps can be hard to remove. Real hard. For the motivated, hours and hours of back breaking shoveling, swinging a pick axe, ruining chain saw blades and cursing so loud so as to negate any relationship with one's neighbor is usually involved. For the unmotivated, tons of beer, chains, and a truck a...
By: jkalter

Continue Reading »]]> Fri, 5 Aug 2011 12:52:28 PDT http://www.instructables.com/id/Remove-Moss-from-Cement-Without-Chemicals-or-a-Pre/
Remove Moss from Cement Without Chemicals or a Pressure Washer - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FPD/CDDP/GQTM02LC/FPDCDDPGQTM02LC.SQUARE2.jpg http://www.instructables.com/files/deriv/FPD/CDDP/GQTM02LC/FPDCDDPGQTM02LC.SQUARE.jpg http://www.instructables.com/files/deriv/FPD/CDDP/GQTM02LC/FPDCDDPGQTM02LC.SMALL.jpg tranoxx My yard has lots of trees overhanging the sidewalk. All the shade makes the section of cement in front of my house a prime area for moss to grow. There are lots of ways to remove moss but a lot of them involve using chemicals or a pressure washer, both of which I don't have access to. If you have a...
By: tranoxx

Continue Reading »]]> Tue, 2 Aug 2011 15:54:54 PDT http://www.instructables.com/id/Changing-a-2005-Honda-Civic-Taillight-Lens-aka-r/
Changing a 2005 Honda Civic Taillight Lens (aka: removing your bumper) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FHH/R0OH/GQB4XFC9/FHHR0OHGQB4XFC9.SQUARE2.jpg http://www.instructables.com/files/deriv/FHH/R0OH/GQB4XFC9/FHHR0OHGQB4XFC9.SQUARE.jpg http://www.instructables.com/files/deriv/FHH/R0OH/GQB4XFC9/FHHR0OHGQB4XFC9.SMALL.jpg jellysix I recently had to change out one of the taillights in my 2005 Honda Civic Hybrid, and was surprised that it was more complex an operation than expected, requiring the partial removal of the bumper.  It wasn't really difficult, but documentation was sparse, so I thought I'd share the experience here ...
By: jellysix

Continue Reading »]]> Thu, 21 Jul 2011 14:52:06 PDT http://www.instructables.com/id/Cutting-Down-a-Tree-Solo/
Cutting Down a Tree in Pieces - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FA1/9VCH/GNJD0LT1/FA19VCHGNJD0LT1.SQUARE2.jpg http://www.instructables.com/files/deriv/FA1/9VCH/GNJD0LT1/FA19VCHGNJD0LT1.SQUARE.jpg http://www.instructables.com/files/deriv/FA1/9VCH/GNJD0LT1/FA19VCHGNJD0LT1.SMALL.jpg cobinrox The following contains some tips that could be used in the course of removing a tree with the constraints: a)  Removal by one person b)  No chain saw (reciprocating saw) c)  Tree cannot be felled in one swoop (environment too cramped) While there are many good references for tree removal, most rely...
By: cobinrox

Continue Reading »]]> Sat, 14 May 2011 21:16:14 PDT http://www.instructables.com/id/Sword-Making-by-Stock-Removal/
Sword Making by Stock Removal - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FQP/YS2C/GBF5KN6J/FQPYS2CGBF5KN6J.SQUARE2.jpg http://www.instructables.com/files/deriv/FQP/YS2C/GBF5KN6J/FQPYS2CGBF5KN6J.SQUARE.jpg http://www.instructables.com/files/deriv/FQP/YS2C/GBF5KN6J/FQPYS2CGBF5KN6J.SMALL.jpg Deathatsix       This is a sword i made for a good friend a couple years ago. It's one of the few i've taken pictures of most of the process of making it. Usually i just zone out and go at it. This sword took me about a week of working late nights after my day job to make.  There are many different ways to ...
By: Deathatsix

Continue Reading »]]> Sat, 10 Jul 2010 20:35:34 PDT http://www.instructables.com/id/Replacing-Lower-Ball-joints-94-Chevy-1500/
Replacing Lower Ball joints, 94 Chevy 1500 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FT0/PEPT/G2HDXO4Q/FT0PEPTG2HDXO4Q.SQUARE2.jpg http://www.instructables.com/files/deriv/FT0/PEPT/G2HDXO4Q/FT0PEPTG2HDXO4Q.SQUARE.jpg http://www.instructables.com/files/deriv/FT0/PEPT/G2HDXO4Q/FT0PEPTG2HDXO4Q.SMALL.jpg designedforhell /* Style Definitions */table.MsoNormalTable{mso-style-name:'Table Normal';mso-tstyle-rowband-size:0;mso-tstyle-colband-size:0;mso-style-noshow:yes;mso-style-priority:99;mso-style-qformat:yes;mso-style-parent:'';mso-padding-alt:0in 5.4pt 0in 5.4pt;mso-para-margin-top:0in;mso-para-margin-right:0...
By: designedforhell

Continue Reading »]]> Thu, 21 Jan 2010 14:22:58 PST http://www.instructables.com/id/How-to-debadge-remove-decals-from-a-motorcycle/
How to debadge (remove decals) from a motorcycle. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FCL/O86I/G4E0Y4J7/FCLO86IG4E0Y4J7.SQUARE2.jpg http://www.instructables.com/files/deriv/FCL/O86I/G4E0Y4J7/FCLO86IG4E0Y4J7.SQUARE.jpg http://www.instructables.com/files/deriv/FCL/O86I/G4E0Y4J7/FCLO86IG4E0Y4J7.SMALL.jpg thickneckarts I love the color of my motorcycle (Kawasaki Ninja 500r) but hate the maroon tribal-looking decals on the fairings. So I decided to remove them and here's how I did it. *NOTE - this method works only on decals that are not "clear-coated" over. If your decals have been clear-coated over, do not use t...
By: thickneckarts

Continue Reading »]]> Tue, 19 Jan 2010 09:23:56 PST http://www.instructables.com/id/How-to-get-get-rid-of-plant-mildew/
How to get get rid of plant mildew - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGW/VPMB/G02LRZYN/FGWVPMBG02LRZYN.SQUARE2.jpg http://www.instructables.com/files/deriv/FGW/VPMB/G02LRZYN/FGWVPMBG02LRZYN.SQUARE.jpg http://www.instructables.com/files/deriv/FGW/VPMB/G02LRZYN/FGWVPMBG02LRZYN.SMALL.jpg Applebohn What you'll need All you need to make the mixture is: Water Baking soda For every 1 cup of water add a quarter of a teaspoon of baking soda and stir it well. It's that simple! Now all that's left to do is to pour it into the spray bottle and apply it to your target plant. Apply to the plant...
By: Applebohn

Continue Reading »]]> Wed, 30 Sep 2009 05:53:56 PDT http://www.instructables.com/id/How-to-remove-rear-strutsshocks/ http://www.instructables.com/files/deriv/FFV/EWV7/FYTCM3MQ/FFVEWV7FYTCM3MQ.SQUARE2.jpg http://www.instructables.com/files/deriv/FFV/EWV7/FYTCM3MQ/FFVEWV7FYTCM3MQ.SQUARE.jpg http://www.instructables.com/files/deriv/FFV/EWV7/FYTCM3MQ/FFVEWV7FYTCM3MQ.SMALL.jpg Subfightr Tools needed will be the proper fitting wrenches and sockets, and a SPECIAL tool named a SPRING COMPRESSOR. Mine was $10 bucks at harbor freight. Very useful. I'm sure there are better ways of going about this, but if you just have the basic tools and a dirt floor... it'll do. I hope this helps yo...
By: Subfightr

Continue Reading »]]> Wed, 16 Sep 2009 00:20:17 PDT http://www.instructables.com/id/Pipe-Tools-A-Small-Garden-Hoe/
Pipe Tools, A Small Garden Hoe - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FMH/AAX4/FWYHRTC6/FMHAAX4FWYHRTC6.SQUARE2.jpg http://www.instructables.com/files/deriv/FMH/AAX4/FWYHRTC6/FMHAAX4FWYHRTC6.SQUARE.jpg http://www.instructables.com/files/deriv/FMH/AAX4/FWYHRTC6/FMHAAX4FWYHRTC6.SMALL.jpg robbtoberfest This tool is similar to a pipe tools shovel that I posted a while back, except for a few extra steps which turn it into a handy little hoe. It's very tough and costs almost nothing. The blade can be modified to have teeth, a sharp point, or whatever you can think of.Once at a garage saw I picked up ...
By: robbtoberfest

Continue Reading »]]> Fri, 10 Jul 2009 19:59:41 PDT http://www.instructables.com/id/High-Torque-Wing-Nut-TighteningRemoval-quotGett/ http://www.instructables.com/files/deriv/FVF/LTME/FOVWML0L/FVFLTMEFOVWML0L.SQUARE2.jpg http://www.instructables.com/files/deriv/FVF/LTME/FOVWML0L/FVFLTMEFOVWML0L.SQUARE.jpg http://www.instructables.com/files/deriv/FVF/LTME/FOVWML0L/FVFLTMEFOVWML0L.SMALL.jpg Lftndbt Ever had a wing nut that would not budge? Can't find a decent set of pliers? No problems! Just grab a piece of cloth or a tea towel and you have your very own high torque wing nut driving/removal device. Wrap your piece of material in the applicable direction. This is to ensure that the cloth "bite...
By: Lftndbt

Continue Reading »]]> Tue, 23 Dec 2008 22:43:14 PST http://www.instructables.com/id/AKAI-LCT2715-Power-Supply-Removal/
AKAI LCT2715 Power Supply Removal - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FVZ/5B1E/FNFPVHA4/FVZ5B1EFNFPVHA4.SQUARE2.jpg http://www.instructables.com/files/deriv/FVZ/5B1E/FNFPVHA4/FVZ5B1EFNFPVHA4.SQUARE.jpg http://www.instructables.com/files/deriv/FVZ/5B1E/FNFPVHA4/FVZ5B1EFNFPVHA4.SMALL.jpg Twizted How to disassemble your AKAI LCT2715 to access the Power Supply You are going to need a Phillips ( X ) Screwdriver for this proceedure. The first thing you will want to do is find a suitable location to disassemble the TV. Try to find somewhere with plenty of space to work and preferably somewh...
By: Twizted

Continue Reading »]]> Wed, 12 Nov 2008 10:47:31 PST http://www.instructables.com/id/Changing-and-rotating-tires/
Changing and rotating tires - More DIY How To Projects]]> http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SQUARE2.jpg http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SQUARE.jpg http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SMALL.jpg FKR First you need to have your car in postion on the lift with all doors and objects in the car or put away. Tools needed For this you will need these said tools: - Air gun - Torque wrench - Air hose - Impact Sockets Car lifting After you get the rigth set off tools you would want to find the...
By: FKR

Continue Reading »]]> Wed, 5 Nov 2008 05:49:26 PST http://www.instructables.com/id/Toyota-Corolla-2007-dash-removal-instrument-panel-/
Toyota Corolla 2007 dash removal instrument panel radio console snake - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJ8/7GIM/FG8Y4M96/FJ87GIMFG8Y4M96.SQUARE2.jpg http://www.instructables.com/files/deriv/FJ8/7GIM/FG8Y4M96/FJ87GIMFG8Y4M96.SQUARE.jpg http://www.instructables.com/files/deriv/FJ8/7GIM/FG8Y4M96/FJ87GIMFG8Y4M96.SMALL.jpg chrisayad I lost my snake in my car and I had to take apart the dash to get it out. My misfortune is your gain because I had my camera with me. I got a little carried away and i'm not sure if i should post these separately or what but i took like half of it apart. Basically what you need is a flathead screw...
By: chrisayad

Continue Reading »]]> Thu, 15 May 2008 13:21:16 PDT http://www.instructables.com/id/Pulling-dents-from-your-old-hearse-or-classic-car/
Pulling dents from your old hearse or classic car - More DIY How To Projects]]> http://cdn.instructables.com/F3W/PHKL/FDO20862/F3WPHKLFDO20862.SQUARE2.jpg http://cdn.instructables.com/F3W/PHKL/FDO20862/F3WPHKLFDO20862.SQUARE.jpg http://cdn.instructables.com/F3W/PHKL/FDO20862/F3WPHKLFDO20862.SMALL.jpg miz_raven This instructable will show you how to pull dents using a stud welder/slide hammer-specically older cars. This article is specific to hearse owner, yet is useful to anyone who owns a car that has dent. Please check out my art work: Miz Raven KustomsThanks photos by Andrew Bauer Prep and In...
By: miz_raven

Continue Reading »]]> Wed, 12 Mar 2008 20:34:46 PDT