Instructables: exploring - workshop - woodwork http://www.instructables.com Thu, 18 Dec 2014 23:23:24 PST BLOX v1.01 Headphones Stand http://www.instructables.com/id/Headphones-Stand/
Headphones Stand - More DIY How To Projects]]> http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SQUARE2.jpg http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SQUARE.jpg http://cdn.instructables.com/FC4/4NUW/I3R6ZUYN/FC44NUWI3R6ZUYN.SMALL.jpg The Wood Workshop A super stylish headphone stand that I designed that is both simple to make and works really well. Its can be made with just a band saw or jigsaw and a little sanding. The cable holder is just my my favorite drawer pull as featured in my portafilter instructable. Timber Selection You can use any ...
By: The Wood Workshop

Continue Reading »]]>
Tue, 16 Dec 2014 14:34:46 PST
Catapult http://www.instructables.com/id/Catapult-4/
Catapult - More DIY How To Projects]]> http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SQUARE2.jpg http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SQUARE.jpg http://cdn.instructables.com/FJR/J3ZA/I3R6XKP2/FJRJ3ZAI3R6XKP2.SMALL.jpg JsimsIII MaterialsWood2 pieces each 7 1/2 inches long3 pieces 14 inches long2 pieces 24 inches long1 piece 28 inches long1 piece 10 1/2 inches longOther2 large and strong eye hook20-30 long screws (can use nails but screws are better) not all will be used a cup (this holds your projectile) 4 20-24 (the shor...
By: JsimsIII

Continue Reading »]]>
Tue, 16 Dec 2014 07:36:25 PST
WOODEN CHRISTMAS DEER http://www.instructables.com/id/WOODEN-CHRISTMAS-DEER/
WOODEN CHRISTMAS DEER - More DIY How To Projects]]> http://cdn.instructables.com/FKE/1GJC/I3KC9HTG/FKE1GJCI3KC9HTG.SQUARE2.jpg http://cdn.instructables.com/FKE/1GJC/I3KC9HTG/FKE1GJCI3KC9HTG.SQUARE.jpg http://cdn.instructables.com/FKE/1GJC/I3KC9HTG/FKE1GJCI3KC9HTG.SMALL.jpg aiden nicholls Hello my name is Aiden. I'm a DIY hobbyist and this is my instructable on how to build a wooden Christmas deer! It is very easy to build and only takes a few hours to make. And the best part is, I made it out of entirely scrap wood I found around the nature reserve and the bins of the furniture d...
By: aiden nicholls

Continue Reading »]]>
Sun, 14 Dec 2014 12:13:28 PST
Glow table http://www.instructables.com/id/Glow-table/
Glow table - More DIY How To Projects]]> http://cdn.instructables.com/FKD/RR8Z/I3BHIQP6/FKDRR8ZI3BHIQP6.SQUARE2.jpg http://cdn.instructables.com/FKD/RR8Z/I3BHIQP6/FKDRR8ZI3BHIQP6.SQUARE.jpg http://cdn.instructables.com/FKD/RR8Z/I3BHIQP6/FKDRR8ZI3BHIQP6.SMALL.jpg mikeasaurus Really light up your next dinner party with a table that glows in the dark!Photoluminescent (glow) powder mixed with clear casting resin fills the naturally formed voids in Pecky Cypress hardwood, creating a unique and stunning table. The glow powder charges up in sunlight and emits a cool blue glow...
By: mikeasaurus

Continue Reading »]]>
Mon, 8 Dec 2014 11:52:37 PST
Lazy Susan http://www.instructables.com/id/Lazy-Susan-1/
Lazy Susan - More DIY How To Projects]]> http://cdn.instructables.com/F73/L0QL/I3BHGRP3/F73L0QLI3BHGRP3.SQUARE2.jpg http://cdn.instructables.com/F73/L0QL/I3BHGRP3/F73L0QLI3BHGRP3.SQUARE.jpg http://cdn.instructables.com/F73/L0QL/I3BHGRP3/F73L0QLI3BHGRP3.SMALL.jpg The Wood Workshop This is probably one of the easiest projects ever and also one of the most useful. Before I go on any further I must point out the aluminium Lazy Susan bearings I found, they are so much better than the plastic ones and because they have little suction caps on both sides they don't need to be perman...
By: The Wood Workshop

Continue Reading »]]>
Sun, 7 Dec 2014 15:07:10 PST
Cherry Wood Ornament http://www.instructables.com/id/Cherry-Wood-Ornament/
Cherry Wood Ornament - More DIY How To Projects]]> http://cdn.instructables.com/FMA/6MU2/I3BHGMXY/FMA6MU2I3BHGMXY.SQUARE2.jpg http://cdn.instructables.com/FMA/6MU2/I3BHGMXY/FMA6MU2I3BHGMXY.SQUARE.jpg http://cdn.instructables.com/FMA/6MU2/I3BHGMXY/FMA6MU2I3BHGMXY.SMALL.jpg jason.burr.946 This year I decided to make each of my daughters an ornament for Christmas. The other two will have to be a different instructable since they are purely metal work. This one is for my beautiful daughter Isabella living in Germany. I made it out of cherry wood veneer, aluminum sheet, and metal bandin...
By: jason.burr.946

Continue Reading »]]>
Sun, 7 Dec 2014 14:29:35 PST
Scandinavian Style Advent Wreath http://www.instructables.com/id/Scandinavian-Style-Advent-Wreath/
Scandinavian Style Advent Wreath - More DIY How To Projects]]> http://cdn.instructables.com/FO9/80EI/I3AKBQ9I/FO980EII3AKBQ9I.SQUARE2.jpg http://cdn.instructables.com/FO9/80EI/I3AKBQ9I/FO980EII3AKBQ9I.SQUARE.jpg http://cdn.instructables.com/FO9/80EI/I3AKBQ9I/FO980EII3AKBQ9I.SMALL.jpg Kion Designs For fans of puristic and scandinavian design - like me - here is my short and easy DIY tutorial of how to create your own wood discs Scandinavian Style Advent Wreath ! You need 8 clampswoodgluedrill (size pf your candles - i used 22mm)4 candlesmarker4 stacks of wood discs (stacks of 3 or 4 discs;...
By: Kion Designs

Continue Reading »]]>
Thu, 4 Dec 2014 13:43:27 PST
Cool Steampunk Guns http://www.instructables.com/id/Steampunk-Guns-From-Scratch/
Cool Steampunk Guns - More DIY How To Projects]]> http://cdn.instructables.com/F3J/UPK6/I2BRBYWU/F3JUPK6I2BRBYWU.SQUARE2.jpg http://cdn.instructables.com/F3J/UPK6/I2BRBYWU/F3JUPK6I2BRBYWU.SQUARE.jpg http://cdn.instructables.com/F3J/UPK6/I2BRBYWU/F3JUPK6I2BRBYWU.SMALL.jpg The Wood Workshop If you don't have a lathe don't despair as you can just as easily make these guns from stuff laying around your house!Items such as old drink bottles, pvc pipes, post tubes and various otherwise useless bits and pieces can all come together to make a great gun. Imagination is the key : )In this tuto...
By: The Wood Workshop

Continue Reading »]]>
Mon, 10 Nov 2014 17:03:44 PST
Scrap Plywood to Custom Speaker Project http://www.instructables.com/id/Custom-Speaker-Amp-and-Housing/
Scrap Plywood to Custom Speaker Project - More DIY How To Projects]]> http://cdn.instructables.com/FZP/3DZ7/I2BYM1GP/FZP3DZ7I2BYM1GP.SQUARE2.jpg http://cdn.instructables.com/FZP/3DZ7/I2BYM1GP/FZP3DZ7I2BYM1GP.SQUARE.jpg http://cdn.instructables.com/FZP/3DZ7/I2BYM1GP/FZP3DZ7I2BYM1GP.SMALL.jpg hank4444 For this project I set out to build myself a completely custom speaker that would sound great and look clean and simple. I built everything from the ground up myself, except for the speaker drivers. However I built everything else; the circuit board, the amplifier circuit, and the housing. I even ta...
By: hank4444

Continue Reading »]]>
Mon, 10 Nov 2014 11:20:22 PST
Build a Bath Bridge http://www.instructables.com/id/Build-a-Bath-Bridge/
Build a Bath Bridge - More DIY How To Projects]]> http://cdn.instructables.com/FIS/9KVG/I28WAVN0/FIS9KVGI28WAVN0.SQUARE2.jpg http://cdn.instructables.com/FIS/9KVG/I28WAVN0/FIS9KVGI28WAVN0.SQUARE.jpg http://cdn.instructables.com/FIS/9KVG/I28WAVN0/FIS9KVGI28WAVN0.SMALL.jpg The Wood Workshop A super simple stylish addition to any bathroom and a great gift.These are the basic dimensions I start with although dimensions can be altered to suit your particular bath. I usually allow 100mm overhang on each side of the bath but its up to you really. I also usually make the bridge 15-20mm thick...
By: The Wood Workshop

Continue Reading »]]>
Sat, 8 Nov 2014 16:08:54 PST
Child's Workbench http://www.instructables.com/id/Childs-Workbench/
Child's Workbench - More DIY How To Projects]]> http://cdn.instructables.com/FLB/U2CZ/I21R07UM/FLBU2CZI21R07UM.SQUARE2.jpg http://cdn.instructables.com/FLB/U2CZ/I21R07UM/FLBU2CZI21R07UM.SQUARE.jpg http://cdn.instructables.com/FLB/U2CZ/I21R07UM/FLBU2CZI21R07UM.SMALL.jpg treehog This instructable details how to build a sturdy and functional child-sized workbench, but it could be easily scaled to full size. I built this for my 3 year-old son for Christmas, and aside from small projects like picture frames and shelves this is my first "real" woodworking project (and also my f...
By: treehog

Continue Reading »]]>
Mon, 3 Nov 2014 07:20:32 PST
Pallet American Flag http://www.instructables.com/id/Pallet-American-Flag/
Pallet American Flag - More DIY How To Projects]]> http://cdn.instructables.com/F0E/ARFX/I20VSAKA/F0EARFXI20VSAKA.SQUARE2.jpg http://cdn.instructables.com/F0E/ARFX/I20VSAKA/F0EARFXI20VSAKA.SQUARE.jpg http://cdn.instructables.com/F0E/ARFX/I20VSAKA/F0EARFXI20VSAKA.SMALL.jpg mackderin This American flag can be used for outdoor or indoor decorative use. It's very simple to make! To make this American flag you will need:One palletRed spray paintWhite semi gloss spray paintBlue acrylic paintSponge brushSawzallDEWALT 6 TPI Woodcutting Sawzall blade Get your pallet For this project...
By: mackderin

Continue Reading »]]>
Sun, 2 Nov 2014 14:12:45 PST
Kindling log http://www.instructables.com/id/Kindling-log/
Kindling log - More DIY How To Projects]]> http://cdn.instructables.com/F2F/FSZ4/I1XEJ5E0/F2FFSZ4I1XEJ5E0.SQUARE2.jpg http://cdn.instructables.com/F2F/FSZ4/I1XEJ5E0/F2FFSZ4I1XEJ5E0.SQUARE.jpg http://cdn.instructables.com/F2F/FSZ4/I1XEJ5E0/F2FFSZ4I1XEJ5E0.SMALL.jpg Frostbourne I was at first planning to make a decomposing bin out of a larger log; but I had broke my ax on it and hit myself in the knee with the hammer.So I just decided to make this simple thing.Hope you enjoy ^^CAUTION: To prevent fast decay ensure that there are no pine bugs eating away at your log! Since ...
By: Frostbourne

Continue Reading »]]>
Fri, 31 Oct 2014 07:02:01 PDT
Spray Paint Rack Improvements http://www.instructables.com/id/Spray-Paint-Rack-Improvements/
Spray Paint Rack Improvements - More DIY How To Projects]]> http://cdn.instructables.com/FCI/XTWC/I1NUU84K/FCIXTWCI1NUU84K.SQUARE2.jpg http://cdn.instructables.com/FCI/XTWC/I1NUU84K/FCIXTWCI1NUU84K.SQUARE.jpg http://cdn.instructables.com/FCI/XTWC/I1NUU84K/FCIXTWCI1NUU84K.SMALL.jpg awillybilly I had built a spray paint rack a few weeks back to try and do some tidying up but I wasn't satisfied with the end result. So in this Instructable I'll show you how I fixed the two things I wasn't happy with.1. The rack needs a back to prevent spray paint cans from beating the wall to death when the...
By: awillybilly

Continue Reading »]]>
Sun, 26 Oct 2014 20:35:30 PDT
Miniature gun Model http://www.instructables.com/id/Miniature-gun-Model-1/
Miniature gun Model - More DIY How To Projects]]> http://cdn.instructables.com/F1N/5ROA/I1CBZCO3/F1N5ROAI1CBZCO3.SQUARE2.jpg http://cdn.instructables.com/F1N/5ROA/I1CBZCO3/F1N5ROAI1CBZCO3.SQUARE.jpg http://cdn.instructables.com/F1N/5ROA/I1CBZCO3/F1N5ROAI1CBZCO3.SMALL.jpg gidder Mini Gun Model made out of pine and a spent .22 magnum Brass.Supplies needed -.22 Magnum Brass Cartridge- .5in x 1in x 4in Piece of White pine- carving knive(s)- various grits of sand paper-some sort of glue, epoxy, cement Gettin Started Draw out your stock shape on the pine and begin carving it...
By: gidder

Continue Reading »]]>
Thu, 16 Oct 2014 15:15:55 PDT
The Ultimate Desk. http://www.instructables.com/id/The-Ultimate-Desk/
The Ultimate Desk. - More DIY How To Projects]]> http://cdn.instructables.com/FAY/W311/I1C42F6F/FAYW311I1C42F6F.SQUARE2.jpg http://cdn.instructables.com/FAY/W311/I1C42F6F/FAYW311I1C42F6F.SQUARE.jpg http://cdn.instructables.com/FAY/W311/I1C42F6F/FAYW311I1C42F6F.SMALL.jpg littlemattyp The desk i have in my room is particularly average. its incredibly weak and rocky, looks cheap and nasty and is too short for me to sit comfortably at! (I'm 6,3") to remedy the problem i decided to with the help of my dad make a far better one to match the my bed which we made not that long ago. the...
By: littlemattyp

Continue Reading »]]>
Wed, 15 Oct 2014 00:10:11 PDT
Turned Mallet http://www.instructables.com/id/Turned-Mallet/
Turned Mallet - More DIY How To Projects]]> http://cdn.instructables.com/FSD/PILA/I12KE4IW/FSDPILAI12KE4IW.SQUARE2.jpg http://cdn.instructables.com/FSD/PILA/I12KE4IW/FSDPILAI12KE4IW.SQUARE.jpg http://cdn.instructables.com/FSD/PILA/I12KE4IW/FSDPILAI12KE4IW.SMALL.jpg jakh Evening everyone. This is my first 'ible and second mallet, but I think I've got it fairly covered. At this moment I've had my lathe for two weeks and loving it, so there might be more turning 'ibles coming, but no promises. A note on safety I know everyone else covers this and you've probably re...
By: jakh

Continue Reading »]]>
Fri, 10 Oct 2014 02:35:38 PDT
Restoring a damaged table edge http://www.instructables.com/id/Restoring-a-damaged-table-edge/
Restoring a damaged table edge - More DIY How To Projects]]> http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SQUARE2.jpg http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SQUARE.jpg http://cdn.instructables.com/FEA/84EH/I0HZ0XO9/FEA84EHI0HZ0XO9.SMALL.jpg gregorio626 The top is subject to more general wear and tear than other areas of a table, especially if they are used for meals or children draw at them. Scratches, dents, and stains are commonplace, and other problems can frequently occur with table tops warping, , splitting, and damaged decorative edges. Fret...
By: gregorio626

Continue Reading »]]>
Sun, 28 Sep 2014 14:19:48 PDT
Wheelbarrow refurbished, http://www.instructables.com/id/Wheelbarrow-refurbished/
Wheelbarrow refurbished, - More DIY How To Projects]]> http://cdn.instructables.com/F5D/AUDU/I0C8XSZT/F5DAUDUI0C8XSZT.SQUARE2.jpg http://cdn.instructables.com/F5D/AUDU/I0C8XSZT/F5DAUDUI0C8XSZT.SQUARE.jpg http://cdn.instructables.com/F5D/AUDU/I0C8XSZT/F5DAUDUI0C8XSZT.SMALL.jpg AmateurBuilder A totally wooden wheelbarrow helped me in carrying items in thegarden, but afrter some years became a decorative part in my yard. I put on it white marble stones adding a special note in a corner. Strength and grip The wheel, a wooden "sandwich" of three layers wooden pieces arranged in cross ord...
By: AmateurBuilder

Continue Reading »]]>
Sun, 21 Sep 2014 14:06:09 PDT
Hand Made Solid Oak Jewellery Box http://www.instructables.com/id/Hand-Made-Solid-Oak-Jewellery-Box/
Hand Made Solid Oak Jewellery Box - More DIY How To Projects]]> http://cdn.instructables.com/FT2/KQRC/I091KRQJ/FT2KQRCI091KRQJ.SQUARE2.jpg http://cdn.instructables.com/FT2/KQRC/I091KRQJ/FT2KQRCI091KRQJ.SQUARE.jpg http://cdn.instructables.com/FT2/KQRC/I091KRQJ/FT2KQRCI091KRQJ.SMALL.jpg aavekian Hello my fellow ible' readers!!Finally I am writing up my first Instructable :D So sit back, grab your tea/coffee and I hope you enjoy!I love working with wood especially with hand tools so when the opportunity came up where I needed a gift for my girlfriend I thought to myself that something made m...
By: aavekian

Continue Reading »]]>
Thu, 18 Sep 2014 23:48:36 PDT
Marvelous money boxes http://www.instructables.com/id/Marvelous-money-boxes/
Marvelous money boxes - More DIY How To Projects]]> http://cdn.instructables.com/FZ6/1U32/I00TIOER/FZ61U32I00TIOER.SQUARE2.jpg http://cdn.instructables.com/FZ6/1U32/I00TIOER/FZ61U32I00TIOER.SQUARE.jpg http://cdn.instructables.com/FZ6/1U32/I00TIOER/FZ61U32I00TIOER.SMALL.jpg petachock I wanted to make a couple of money boxes for my kids and had a marvel poster spare so decided I'd make a comic clad money box for them each. They will get £1 a week and 20 pence a day, with the day one being an incentive to behave......well I'm hoping anyway (they are 5 and 7 by the way and not grow...
By: petachock

Continue Reading »]]>
Sat, 13 Sep 2014 14:00:58 PDT
Pallet Coffee Table 2 http://www.instructables.com/id/Pallet-Coffee-Table-2-3/
Pallet Coffee Table 2 - More DIY How To Projects]]> http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SQUARE2.jpg http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SQUARE.jpg http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SMALL.jpg sbrenner 1.Made this coffee table out of 2 pallets2. Sanded with 120 grit3. Stained with a Dark Cherry Stain4. Polyurethaned it5. Resanded/scuffed up to give it a glossy and rough look.
By: sbrenner

Continue Reading »]]>
Sat, 13 Sep 2014 06:11:49 PDT
wooden pen http://www.instructables.com/id/wooden-pen-1/
wooden pen - More DIY How To Projects]]> http://cdn.instructables.com/FS4/YHS9/HZS8SZ56/FS4YHS9HZS8SZ56.SQUARE2.jpg http://cdn.instructables.com/FS4/YHS9/HZS8SZ56/FS4YHS9HZS8SZ56.SQUARE.jpg http://cdn.instructables.com/FS4/YHS9/HZS8SZ56/FS4YHS9HZS8SZ56.SMALL.jpg Unboxingexperience7 Do you want a unique pen? A wooden pen is very simple to make. All you need isa branch of about 4 inch length; it is important that the wood has a large enough pith in the centre (e.g. elder wood)a pen minea knifea rod of the diameter of the pen mine Cut the branch in 2 pieces Take an about 4 in...
By: Unboxingexperience7

Continue Reading »]]>
Sun, 7 Sep 2014 08:15:22 PDT
The Pallet Playhouse http://www.instructables.com/id/My-Pallet-Playhouse/
The Pallet Playhouse - More DIY How To Projects]]> http://cdn.instructables.com/FUV/Z0SG/HZJO7MCR/FUVZ0SGHZJO7MCR.SQUARE2.jpg http://cdn.instructables.com/FUV/Z0SG/HZJO7MCR/FUVZ0SGHZJO7MCR.SQUARE.jpg http://cdn.instructables.com/FUV/Z0SG/HZJO7MCR/FUVZ0SGHZJO7MCR.SMALL.jpg nemesis5500 I made a Playhouse from Pallets and stud work battens.i decided to make something with all these pallets i had in my work yard that were unusable to us, they were almost brand new and quite decent thick strong timber with good size boards. i started to bring them home bit by bit and after 2 weeks i ...
By: nemesis5500

Continue Reading »]]>
Mon, 1 Sep 2014 11:53:32 PDT
Table-top Mini-bar http://www.instructables.com/id/Table-top-Mini-bar/
Table-top Mini-bar - More DIY How To Projects]]> http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SQUARE2.jpg http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SQUARE.jpg http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SMALL.jpg msparker In a few days i'll be going back for my final year at uni. So far its been great, but with the wisdom of 3 year behind me what could i do to improve the experience? a mini-bar of course!!!For my mini-bar i was going to build upon the experience of making a bar for my girlfriend: http://www.instructa...
By: msparker

Continue Reading »]]>
Mon, 1 Sep 2014 08:39:09 PDT
Bridge Bookshelf http://www.instructables.com/id/Bridge-Bookshelf/
Bridge Bookshelf - More DIY How To Projects]]> http://cdn.instructables.com/F6E/07GE/HZ88QDGM/F6E07GEHZ88QDGM.SQUARE2.jpg http://cdn.instructables.com/F6E/07GE/HZ88QDGM/F6E07GEHZ88QDGM.SQUARE.jpg http://cdn.instructables.com/F6E/07GE/HZ88QDGM/F6E07GEHZ88QDGM.SMALL.jpg HareenK Materials1) Driller, Drill bids, Sand Papers, washers2) Wood - Softwood from Home Depot3) Metal Bookshelf holders (EKBY BJÄRNUM Bracket - 11)4) Parachute cordFor a more elaborate detail of the entire build process please read the following blog- http://hareen.quora.com/Carpentering-A-Bookshelf Cu...
By: HareenK

Continue Reading »]]>
Sun, 24 Aug 2014 21:19:59 PDT
Crosscut Sled for your Table Saw http://www.instructables.com/id/Crosscut-Sled-for-your-Table-Saw/
Crosscut Sled for your Table Saw - More DIY How To Projects]]> http://cdn.instructables.com/FW7/IPTV/HYS0YGOB/FW7IPTVHYS0YGOB.SQUARE2.jpg http://cdn.instructables.com/FW7/IPTV/HYS0YGOB/FW7IPTVHYS0YGOB.SQUARE.jpg http://cdn.instructables.com/FW7/IPTV/HYS0YGOB/FW7IPTVHYS0YGOB.SMALL.jpg Marsh A crosscut sled is a very handy attachment for your table saw. This is the first of a series of table saw attachments. The reason this is the first is because it will be the basis from which you start on the rest. This sled can be made into a circle cutter; a taper cutting sled, a miter sled, a box ...
By: Marsh

Continue Reading »]]>
Tue, 12 Aug 2014 19:55:37 PDT
wooden vintage box http://www.instructables.com/id/wooden-vintage-box/
wooden vintage box - More DIY How To Projects]]> http://cdn.instructables.com/FCH/5PMR/HYHGBVOD/FCH5PMRHYHGBVOD.SQUARE2.jpg http://cdn.instructables.com/FCH/5PMR/HYHGBVOD/FCH5PMRHYHGBVOD.SQUARE.jpg http://cdn.instructables.com/FCH/5PMR/HYHGBVOD/FCH5PMRHYHGBVOD.SMALL.jpg Robot Cop hey everyone! this is how you can make a really nice wooden box to store small items in! If you make one please put a picture and comment so i can see how it worked out:D What you will need. 2 small hinges,a small latch,plastic wood,wood finish (optional),wood varnish,a piece of wood at least ...
By: Robot Cop

Continue Reading »]]>
Tue, 5 Aug 2014 17:28:30 PDT
DIY Baby Bed http://www.instructables.com/id/DIY-Baby-Bed/
DIY Baby Bed - More DIY How To Projects]]> http://cdn.instructables.com/FHU/WNO8/HYCSX8TH/FHUWNO8HYCSX8TH.SQUARE2.jpg http://cdn.instructables.com/FHU/WNO8/HYCSX8TH/FHUWNO8HYCSX8TH.SQUARE.jpg http://cdn.instructables.com/FHU/WNO8/HYCSX8TH/FHUWNO8HYCSX8TH.SMALL.jpg russian_desman Once upon the time I decided to make the bed for my newborn son. At first I bought the mattress in local baby store (the part I am unable to make myself). The mattress size is 40 x 90 cm. (All sizes will be given in centimeters, you can always divide them by 2.54 to convert them into inches). Also I...
By: russian_desman

Continue Reading »]]>
Sat, 2 Aug 2014 12:48:18 PDT
DIY tiny wooden Sickle and Flail a.k.a. Kusarigama for martial arts practice http://www.instructables.com/id/DIY-tiny-wooden-Sickle-and-Flail-aka-Kusarigama-fo/
DIY tiny wooden Sickle and Flail a.k.a. Kusarigama for martial arts practice - More DIY How To Projects]]> http://cdn.instructables.com/F8A/UC6O/HY5Y3AGK/F8AUC6OHY5Y3AGK.SQUARE2.jpg http://cdn.instructables.com/F8A/UC6O/HY5Y3AGK/F8AUC6OHY5Y3AGK.SQUARE.jpg http://cdn.instructables.com/F8A/UC6O/HY5Y3AGK/F8AUC6OHY5Y3AGK.SMALL.jpg Dr Froggy Hi, today we will learn how to make a tiny kusarigama training weapon from scratch.Kusarigama is a contraction of two words: kusari for chain and Kama for sickle, in fact it is nothing more than a sickle connected to a flail. The kama becomes gama...This is a fake weapon which is dedicated to prac...
By: Dr Froggy

Continue Reading »]]>
Mon, 28 Jul 2014 10:03:21 PDT
DIY Wooden Rose Gift http://www.instructables.com/id/DIY-Wooden-Rose-Gift/
DIY Wooden Rose Gift - More DIY How To Projects]]> http://cdn.instructables.com/FIX/L4NS/HY12JDWX/FIXL4NSHY12JDWX.SQUARE2.jpg http://cdn.instructables.com/FIX/L4NS/HY12JDWX/FIXL4NSHY12JDWX.SQUARE.jpg http://cdn.instructables.com/FIX/L4NS/HY12JDWX/FIXL4NSHY12JDWX.SMALL.jpg mclark53 A lovely rose given to your partner or friend to show that you care or just for plain decoration.Remember you can use any color to symbolize different things. In my case, I used yellow for friendship and red for care but you can use anything you want. Shaping the Rose Bud Find a good solid branc...
By: mclark53

Continue Reading »]]>
Sat, 26 Jul 2014 16:41:28 PDT
How to build a catapult -TJ & Menelik http://www.instructables.com/id/How-to-build-a-catapult-TJ-Menelik/
How to build a catapult -TJ & Menelik - More DIY How To Projects]]> http://cdn.instructables.com/FMA/3IKF/HY12F064/FMA3IKFHY12F064.SQUARE2.jpg http://cdn.instructables.com/FMA/3IKF/HY12F064/FMA3IKFHY12F064.SQUARE.jpg http://cdn.instructables.com/FMA/3IKF/HY12F064/FMA3IKFHY12F064.SMALL.jpg tnakano Materials4x8 (2 catapults/sheets) SketchUp Illustrator (optional)V-carveShop bot CNCDrill, String's, Screws, Staple gun, Wood glue, Cups, Saw, and Elastic bands,We wanted our catapult to have an adjustable stopping bar to control how much distance we got from the projectile. Also, we built a strong...
By: tnakano

Continue Reading »]]>
Thu, 24 Jul 2014 12:25:12 PDT
Pocket Hole Plugs http://www.instructables.com/id/Pocket-Hole-Plug-Cutting-Jig-for-the-Band-Saw/
Pocket Hole Plugs - More DIY How To Projects]]> http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SQUARE2.jpg http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SQUARE.jpg http://cdn.instructables.com/FRX/WKUG/HXUDFN2T/FRXWKUGHXUDFN2T.SMALL.jpg KellyCraig
By: KellyCraig

Continue Reading »]]>
Mon, 21 Jul 2014 13:42:30 PDT
Fish lure pendant http://www.instructables.com/id/Fish-lure-pendant/
Fish lure pendant - More DIY How To Projects]]> http://cdn.instructables.com/FAN/3FEW/HWP876VI/FAN3FEWHWP876VI.SQUARE2.jpg http://cdn.instructables.com/FAN/3FEW/HWP876VI/FAN3FEWHWP876VI.SQUARE.jpg http://cdn.instructables.com/FAN/3FEW/HWP876VI/FAN3FEWHWP876VI.SMALL.jpg agis68 hallo hallo!!!! Long time to hear of me, i was quite busy.....The summer started the sun shines all day and its a nice moment for fishing.....but before go alone or with your buddy to fish remember to keep calm your bound....Every June since 1997 i fist met my beloved soulmate, we share gifts when o...
By: agis68

Continue Reading »]]>
Sat, 21 Jun 2014 20:48:59 PDT
An Awesome Wooden Lamp http://www.instructables.com/id/An-Awesome-Wooden-Lamp/
An Awesome Wooden Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FVR/T051/HW6T81H7/FVRT051HW6T81H7.SQUARE2.jpg http://cdn.instructables.com/FVR/T051/HW6T81H7/FVRT051HW6T81H7.SQUARE.jpg http://cdn.instructables.com/FVR/T051/HW6T81H7/FVRT051HW6T81H7.SMALL.jpg zayec Hello Everyone! In this Instructable I'm going to show you how to build your own rough wooden chandelier for a country house. When I faced a problem of room lightning in my new house, I spent weeks trying to find both functional and stylish solution. However, there was none that could work...
By: zayec

Continue Reading »]]>
Mon, 9 Jun 2014 14:40:53 PDT
Adjustable height formica desk with folding legs (made from crutches). http://www.instructables.com/id/Adjustable-height-formica-desk-with-folding-legs/
Adjustable height formica desk with folding legs (made from crutches). - More DIY How To Projects]]> http://cdn.instructables.com/FH7/C8OF/HVV0OGLC/FH7C8OFHVV0OGLC.SQUARE2.jpg http://cdn.instructables.com/FH7/C8OF/HVV0OGLC/FH7C8OFHVV0OGLC.SQUARE.jpg http://cdn.instructables.com/FH7/C8OF/HVV0OGLC/FH7C8OFHVV0OGLC.SMALL.jpg Todd Gehris This was another one of my re-purpose and reuse projects. A worn out top of an old computer desk and a bunch of crutches I'd collected were just screaming to be made into a desk. Instead of purchasing metal hardware to attach the legs I came up with a way to attach the crutches using a few pieces of...
By: Todd Gehris

Continue Reading »]]>
Sat, 31 May 2014 10:13:24 PDT
Sanding Block from scrap wood http://www.instructables.com/id/Sanding-Block-from-scrap-wood/
Sanding Block from scrap wood - More DIY How To Projects]]> http://cdn.instructables.com/FKW/09O5/HVPELIUP/FKW09O5HVPELIUP.SQUARE2.jpg http://cdn.instructables.com/FKW/09O5/HVPELIUP/FKW09O5HVPELIUP.SQUARE.jpg http://cdn.instructables.com/FKW/09O5/HVPELIUP/FKW09O5HVPELIUP.SMALL.jpg heavy11 Since my bandsaw motor is getting an overhaul I decided to make something useful for my shop. Here is a simple yet effective sanding block which I made only from scrap laying in my shop.
By: heavy11

Continue Reading »]]>
Tue, 27 May 2014 13:24:08 PDT
cutting board http://www.instructables.com/id/cutting-board-2/
cutting board - More DIY How To Projects]]> http://cdn.instructables.com/FQA/L5QT/HVNXTJA4/FQAL5QTHVNXTJA4.SQUARE2.jpg http://cdn.instructables.com/FQA/L5QT/HVNXTJA4/FQAL5QTHVNXTJA4.SQUARE.jpg http://cdn.instructables.com/FQA/L5QT/HVNXTJA4/FQAL5QTHVNXTJA4.SMALL.jpg shawn23 these cutting boards are wonderful. you can use most of the scrap wood you have. this is my first post so bear with me materials sorry about the mess I just cleaned out my dust collector because the filter went badfirst off you needall of the pieces of wood of any kind you can get. they need to b...
By: shawn23

Continue Reading »]]>
Mon, 26 May 2014 20:21:30 PDT
Indoor Vertical Garden with recycled bottles http://www.instructables.com/id/Indoor-Vertical-Garden-with-recycled-bottles/
Indoor Vertical Garden with recycled bottles - More DIY How To Projects]]> http://cdn.instructables.com/FGD/L7MU/HVGXWOLO/FGDL7MUHVGXWOLO.SQUARE2.jpg http://cdn.instructables.com/FGD/L7MU/HVGXWOLO/FGDL7MUHVGXWOLO.SQUARE.jpg http://cdn.instructables.com/FGD/L7MU/HVGXWOLO/FGDL7MUHVGXWOLO.SMALL.jpg dmoonen This is my first instructable. Enjoy it and I am always open for feedback. I saw this great Instructable and since I don't have acces to the outside I wanted to make one that fitted on my windowsill. It turned out to be quite easy and fun. Please read everything before you start. Otherwise you m...
By: dmoonen

Continue Reading »]]>
Fri, 23 May 2014 04:33:31 PDT
arts and crafts pallet clock http://www.instructables.com/id/arts-and-crafts-pallet-clock/
arts and crafts pallet clock - More DIY How To Projects]]> http://cdn.instructables.com/FV0/K1SZ/HVGXMAC1/FV0K1SZHVGXMAC1.SQUARE2.jpg http://cdn.instructables.com/FV0/K1SZ/HVGXMAC1/FV0K1SZHVGXMAC1.SQUARE.jpg http://cdn.instructables.com/FV0/K1SZ/HVGXMAC1/FV0K1SZHVGXMAC1.SMALL.jpg rickysp8 "Time for a pallet contest clock " get it When I first saw there was a pallet contest coming up I got busy gathering pallet wood my favorite thing to build with.THE STUFFplenty of pallet boards glue (tite bond 2 )1/2" hinges "4"battery clock works clock dialpendulum 2" clock hands6x6 piece of glasss...
By: rickysp8

Continue Reading »]]>
Thu, 22 May 2014 21:12:49 PDT
Woodworking With Children How To: Fox and Sheep playing board http://www.instructables.com/id/Woodworking-With-Children-How-To-Fox-and-Sheep-pla/
Woodworking With Children How To: Fox and Sheep playing board - More DIY How To Projects]]> http://cdn.instructables.com/FX5/C24X/HV2AJIYW/FX5C24XHV2AJIYW.SQUARE2.jpg http://cdn.instructables.com/FX5/C24X/HV2AJIYW/FX5C24XHV2AJIYW.SQUARE.jpg http://cdn.instructables.com/FX5/C24X/HV2AJIYW/FX5C24XHV2AJIYW.SMALL.jpg FlorisBooks Small speedy projects are perfect when you want to get started and practise your woodworking skills; they're also excellent if you're working with a very young carpenter. That's why we've chosen this fun game to start with - it's quick and simple to make. No special carpentry skills are needed to ma...
By: FlorisBooks

Continue Reading »]]>
Mon, 12 May 2014 04:15:17 PDT
Furnish your entire house for free ! http://www.instructables.com/id/Furnish-your-entire-house-for-free-/
Furnish your entire house for free ! - More DIY How To Projects]]> http://cdn.instructables.com/FQ7/VV95/HVXDZ126/FQ7VV95HVXDZ126.SQUARE2.jpg http://cdn.instructables.com/FQ7/VV95/HVXDZ126/FQ7VV95HVXDZ126.SQUARE.jpg http://cdn.instructables.com/FQ7/VV95/HVXDZ126/FQ7VV95HVXDZ126.SMALL.jpg Akin Yildiz couple days ago I came across with the pallets section on instructables. I was blown away. before I knew this site existed, when I lived somewhere else.... I actually had made bunch of wooden pallet designs, not taking many pictures during the process :( again, i didn't know.. so we will all have to...
By: Akin Yildiz

Continue Reading »]]>
Sat, 10 May 2014 16:35:58 PDT
8 ft Room Organizer http://www.instructables.com/id/8-ft-Room-Organizer/
8 ft Room Organizer - More DIY How To Projects]]> http://cdn.instructables.com/FB0/2JS3/HURHNVBT/FB02JS3HURHNVBT.SQUARE2.jpg http://cdn.instructables.com/FB0/2JS3/HURHNVBT/FB02JS3HURHNVBT.SQUARE.jpg http://cdn.instructables.com/FB0/2JS3/HURHNVBT/FB02JS3HURHNVBT.SMALL.jpg MidnightMaker Life takes it's twists and turns. I recently became self employed. Seeing your job being exported is no fun, but it created an opportunity to work at creating a life without the corporate safety net. One of the problems I encountered was that my home work environment was not ideally configured for w...
By: MidnightMaker

Continue Reading »]]>
Sun, 4 May 2014 10:44:55 PDT
Single Bed http://www.instructables.com/id/Single-Bed/
Single Bed - More DIY How To Projects]]> http://cdn.instructables.com/FB1/60T4/HUM7DYFS/FB160T4HUM7DYFS.SQUARE2.jpg http://cdn.instructables.com/FB1/60T4/HUM7DYFS/FB160T4HUM7DYFS.SQUARE.jpg http://cdn.instructables.com/FB1/60T4/HUM7DYFS/FB160T4HUM7DYFS.SMALL.jpg pudtiny This instructable shows to build a single bed using standard structural timber. The bed is designed to fit a UK mattress 900mm x 190mm. The size timber used for this is 38mm x 63mm and comes in 2.4m lengths (http://tinyurl.com/prbfcsk)The benefit of structural timber is it should be straight and fau...
By: pudtiny

Continue Reading »]]>
Wed, 30 Apr 2014 05:28:41 PDT
Art Collectors Cabinet http://www.instructables.com/id/Art-Collectors-Cabinet/
Art Collectors Cabinet - More DIY How To Projects]]> http://cdn.instructables.com/F1D/O3C1/HUHT1FSO/F1DO3C1HUHT1FSO.SQUARE2.jpg http://cdn.instructables.com/F1D/O3C1/HUHT1FSO/F1DO3C1HUHT1FSO.SQUARE.jpg http://cdn.instructables.com/F1D/O3C1/HUHT1FSO/F1DO3C1HUHT1FSO.SMALL.jpg Ruud van Koningsbrugge Whenever you collect or create art, there soon comes a point where there is no more place in the house to display the collection. With many decorative items its good advise to cluster in groups, but with many pieces of art that doesn't work. Each piece needs a place of its own. To accommodate a few ...
By: Ruud van Koningsbrugge

Continue Reading »]]>
Sun, 27 Apr 2014 03:48:46 PDT
New toolbox from pallet wood http://www.instructables.com/id/New-toolbox-from-pallet-wood/
New toolbox from pallet wood - More DIY How To Projects]]> http://cdn.instructables.com/FC1/YE6F/HUAXIEK5/FC1YE6FHUAXIEK5.SQUARE2.jpg http://cdn.instructables.com/FC1/YE6F/HUAXIEK5/FC1YE6FHUAXIEK5.SQUARE.jpg http://cdn.instructables.com/FC1/YE6F/HUAXIEK5/FC1YE6FHUAXIEK5.SMALL.jpg wrongname It is not a difficult project so I don't have too many pictures during the process. It is big enough to keep all my tools and other miscellaneous stuff out of my wife's sight. Win win! Pallet dismantled Using all the tool you have or you can imagine, dismantle the pallet carefully. Try not t...
By: wrongname

Continue Reading »]]>
Tue, 22 Apr 2014 04:41:49 PDT
Pallet Table http://www.instructables.com/id/Pallet-Table-5/
Pallet Table - More DIY How To Projects]]> http://cdn.instructables.com/FKG/AGGC/HTK5NE05/FKGAGGCHTK5NE05.SQUARE2.jpg http://cdn.instructables.com/FKG/AGGC/HTK5NE05/FKGAGGCHTK5NE05.SQUARE.jpg http://cdn.instructables.com/FKG/AGGC/HTK5NE05/FKGAGGCHTK5NE05.SMALL.jpg stee7 Beginning I just took 2 full pallet and attach them together in the center with 4x4 post wood Stain After attaching them together I stain it with dark brown and treated it with Thompson water seal Final Final I added 4x5 post for legs....I made 6 leg so it can be stable with the weight
By: stee7

Continue Reading »]]>
Thu, 3 Apr 2014 19:23:29 PDT
Pallet Sliding Door http://www.instructables.com/id/Pallet-Sliding-Door-1/
Pallet Sliding Door - More DIY How To Projects]]> http://cdn.instructables.com/FZW/WE2X/HTK5M1Z1/FZWWE2XHTK5M1Z1.SQUARE2.jpg http://cdn.instructables.com/FZW/WE2X/HTK5M1Z1/FZWWE2XHTK5M1Z1.SQUARE.jpg http://cdn.instructables.com/FZW/WE2X/HTK5M1Z1/FZWWE2XHTK5M1Z1.SMALL.jpg stee7 Pallet Disassemble the pile of pallet Framing I brought 4 strip of 4x10 and nail each piece if pallet wood into it After Framing After framing I stain it with dark brown stain and install the wheeling for the track Final Install metal rail for the door to hang on
By: stee7

Continue Reading »]]>
Thu, 3 Apr 2014 10:17:48 PDT
Hardwood hair combs on the scroll saw - Made at Techshop http://www.instructables.com/id/Hardwood-hair-combs/
Hardwood hair combs on the scroll saw - Made at Techshop - More DIY How To Projects]]> http://cdn.instructables.com/FFB/07J7/HT556XO8/FFB07J7HT556XO8.SQUARE2.jpg http://cdn.instructables.com/FFB/07J7/HT556XO8/FFB07J7HT556XO8.SQUARE.jpg http://cdn.instructables.com/FFB/07J7/HT556XO8/FFB07J7HT556XO8.SMALL.jpg workislove In this instructable I'll show you how I made a hardwood hair pick on the scroll saw at Techshop's wood shop. I had a few reasons for wanting to make this. First, they look cool, and I've always just wanted to have one in my pocket. Second, I've heard that wood combs are supposed to be better for o...
By: workislove

Continue Reading »]]>
Sun, 23 Mar 2014 21:54:44 PDT
Electronic-Lab in a Box http://www.instructables.com/id/Electronic-Lab-in-a-Box/
Electronic-Lab in a Box - More DIY How To Projects]]> http://cdn.instructables.com/F1O/TYVW/HSAOK7RA/F1OTYVWHSAOK7RA.SQUARE2.jpg http://cdn.instructables.com/F1O/TYVW/HSAOK7RA/F1OTYVWHSAOK7RA.SQUARE.jpg http://cdn.instructables.com/F1O/TYVW/HSAOK7RA/F1OTYVWHSAOK7RA.SMALL.jpg McLovinGyver Since I work in a small flat with no separate space for handcrafts i struggle always with building before and cleaning up afterwards just for simple electronic work. There were always the same tools to search in boxes and cases, plug them in, find wires and solderin tin and so on. So for only 5 mi...
By: McLovinGyver

Continue Reading »]]>
Sun, 2 Mar 2014 14:37:17 PST