http://www.instructables.com Tue, 18 Jun 2013 16:32:51 PDT BLOX v1.01 http://www.instructables.com/id/Custom-Gauge-Mount/
Custom Gauge Mount - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F58/DMHX/HHYLVY2S/F58DMHXHHYLVY2S.SQUARE2.jpg http://www.instructables.com/files/deriv/F58/DMHX/HHYLVY2S/F58DMHXHHYLVY2S.SQUARE.jpg http://www.instructables.com/files/deriv/F58/DMHX/HHYLVY2S/F58DMHXHHYLVY2S.SMALL.jpg dtt900653 Why pay $20 for a simple gauge mount that can be made using $2 of scrap plastic and 30 minutes of free time?  For this application I wanted something that could hold two gauges (Tach and Voltage) & looked good. By the way, "I made it at TechShop" www.techshop.ws Design Process The only critical ...
By: dtt900653

Continue Reading »]]> Tue, 18 Jun 2013 12:38:19 PDT http://www.instructables.com/id/swirl-flap-repair-and-EGR-blanking-on-astra-H-19-/
swirl flap repair and EGR blanking on astra H 1.9 CDTI - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZX/0Q35/HH9SOARX/FZX0Q35HH9SOARX.SQUARE2.jpg http://www.instructables.com/files/deriv/FZX/0Q35/HH9SOARX/FZX0Q35HH9SOARX.SQUARE.jpg http://www.instructables.com/files/deriv/FZX/0Q35/HH9SOARX/FZX0Q35HH9SOARX.SMALL.jpg hmv4u I think the first thing to state is this is not claimed to be a permanent repair-no one currently doing this mod knows how long it will last so it has to be viewed as a temp repair,that aside there are people who reckon it has lasted quite  few thousand miles so far-my own view is that im intending ...
By: hmv4u

Continue Reading »]]> Mon, 17 Jun 2013 16:18:29 PDT http://www.instructables.com/id/The-Transportation-of-the-Future-HEV-Bus/
The Transportation of the Future, HEV Bus - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5C/CW1T/HHS9HVNR/F5CCW1THHS9HVNR.SQUARE2.jpg http://www.instructables.com/files/deriv/F5C/CW1T/HHS9HVNR/F5CCW1THHS9HVNR.SQUARE.jpg http://www.instructables.com/files/deriv/F5C/CW1T/HHS9HVNR/F5CCW1THHS9HVNR.SMALL.jpg seomk0476 In any city you go, there are buses roaming around everywhere. I thought we might be able to turn these buses into a moving energy powerhouse. Congregating this idea into a bus that uses hydrogen as its fuel, I've designed an extremely eco-friendly bus that only emits water and heat, and even provid...
By: seomk0476

Continue Reading »]]> Mon, 17 Jun 2013 12:29:28 PDT http://www.instructables.com/id/mods-neon/ http://www.instructables.com/files/deriv/FDU/3P4Z/HHS9D4YI/FDU3P4ZHHS9D4YI.SQUARE2.jpg http://www.instructables.com/files/deriv/FDU/3P4Z/HHS9D4YI/FDU3P4ZHHS9D4YI.SQUARE.jpg http://www.instructables.com/files/deriv/FDU/3P4Z/HHS9D4YI/FDU3P4ZHHS9D4YI.SMALL.jpg dreamloger null null null null null null null null null null null null null null null null null null
By: dreamloger

Continue Reading »]]> Mon, 17 Jun 2013 06:25:46 PDT http://www.instructables.com/id/How-to-remove-a-Toyota-Hilux-engine-in-a-few-hours/ http://www.instructables.com/files/deriv/FYY/SU87/HHS9UUBX/FYYSU87HHS9UUBX.SQUARE2.jpg http://www.instructables.com/files/deriv/FYY/SU87/HHS9UUBX/FYYSU87HHS9UUBX.SQUARE.jpg http://www.instructables.com/files/deriv/FYY/SU87/HHS9UUBX/FYYSU87HHS9UUBX.SMALL.jpg diy kiwi My Hilux had a leaking rear crankshaft seal so I had to split the engine from the transmission to replace the seal. Rather than breaking my back trying to extract the trans from below, I decided to lift the engine out, It is a much easier way to do it if you have an engine lift, endless chain or hea...
By: diy kiwi

Continue Reading »]]> Thu, 13 Jun 2013 04:43:59 PDT http://www.instructables.com/id/Lawn-Chair-Gokart/
Lawn Chair Gokart - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FDJ/ZGYO/HHS9S49A/FDJZGYOHHS9S49A.SQUARE2.jpg http://www.instructables.com/files/deriv/FDJ/ZGYO/HHS9S49A/FDJZGYOHHS9S49A.SQUARE.jpg http://www.instructables.com/files/deriv/FDJ/ZGYO/HHS9S49A/FDJZGYOHHS9S49A.SMALL.jpg firstson11 This is just to show the steps and how I built this if you want to build one or have any questions just ask Get A Design Weld Up Your Frame Steering I cut up an old free spinning tire and use the bearings to hold the steering column Put The Sprocket On The Drive Wheel Mount The En...
By: firstson11

Continue Reading »]]> Wed, 12 Jun 2013 23:06:20 PDT http://www.instructables.com/id/Car-Rust-Repair-1981-VW-rabbit-floor-pands/
Car Rust Repair - 1981 VW rabbit floor pan - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F59/7A4J/HHS9KJPJ/F597A4JHHS9KJPJ.SQUARE2.jpg http://www.instructables.com/files/deriv/F59/7A4J/HHS9KJPJ/F597A4JHHS9KJPJ.SQUARE.jpg http://www.instructables.com/files/deriv/F59/7A4J/HHS9KJPJ/F597A4JHHS9KJPJ.SMALL.jpg marc.cryan Rust sucks.  It just totally sucks. I've been meaning to write this up for a while, but I don't even want to talk about it. I will try to give any useful tips I have.... it will be short. Safety Do a google search for:  angle grinder injuries photos Then put on this face sheild:    Bionic Face...
By: marc.cryan

Continue Reading »]]> Tue, 11 Jun 2013 20:39:27 PDT http://www.instructables.com/id/Home-Made-Small-Engine-Gasket/
Home Made Small Engine Gasket - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F34/2E80/HHMI573B/F342E80HHMI573B.SQUARE2.jpg http://www.instructables.com/files/deriv/F34/2E80/HHMI573B/F342E80HHMI573B.SQUARE.jpg http://www.instructables.com/files/deriv/F34/2E80/HHMI573B/F342E80HHMI573B.SMALL.jpg werock257 If you rebuild any small engine, or even take it apart for repair, chances are you'll need to replace the gasket. You could order a new one or you could make your own. Ordering gaskets can delay any project if it doesn't fit right or can't be found. This is a quick and easy alternative. Materials...
By: werock257

Continue Reading »]]> Sun, 9 Jun 2013 07:02:50 PDT http://www.instructables.com/id/how-to-replace-your-car-air-filter/
how to replace your car air filter - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4Q/F5W8/HHMI93ZO/F4QF5W8HHMI93ZO.SQUARE2.jpg http://www.instructables.com/files/deriv/F4Q/F5W8/HHMI93ZO/F4QF5W8HHMI93ZO.SQUARE.jpg http://www.instructables.com/files/deriv/F4Q/F5W8/HHMI93ZO/F4QF5W8HHMI93ZO.SMALL.jpg xxyir Any engine that runs by internal combustion of fuel requires air to operate. That's because without air, specifically, oxygen, fuels like gasoline and diesel can't burn and provide the explosive force to power the engine. The engine air filters allow the right amount of air down our vehicle engines'...
By: xxyir

Continue Reading »]]> Sun, 9 Jun 2013 03:55:58 PDT http://www.instructables.com/id/Tutorial-Change-Rear-Shoe-and-Drum-on-2004-Dodge-/ http://www.instructables.com/files/deriv/F5R/A51E/HHMI86IJ/F5RA51EHHMI86IJ.SQUARE2.jpg http://www.instructables.com/files/deriv/F5R/A51E/HHMI86IJ/F5RA51EHHMI86IJ.SQUARE.jpg http://www.instructables.com/files/deriv/F5R/A51E/HHMI86IJ/F5RA51EHHMI86IJ.SMALL.jpg nukem384 Learn how to change the rear drums and shoes on a 2004 Dodge Neon.  Many other cars with rear drum/shoe setups are similar or the same. Check out my web site! http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Thu, 6 Jun 2013 19:27:38 PDT http://www.instructables.com/id/Clutch-Pedal-Grip/
Clutch Pedal Grip - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F04/A4LQ/HH2VOGTK/F04A4LQHH2VOGTK.SQUARE2.jpg http://www.instructables.com/files/deriv/F04/A4LQ/HH2VOGTK/F04A4LQHH2VOGTK.SQUARE.jpg http://www.instructables.com/files/deriv/F04/A4LQ/HH2VOGTK/F04A4LQHH2VOGTK.SMALL.jpg josh The night before I was to spend a week drivin in the Peruvian Andies on crazy roads I did this hack to make driving this worn out 1987 landcruiser 70 series a little bit safer. Shoe Goo Is Magical Besides tie wire and duckttape shoe goo is one of the handyman's secret weapons. All you need for t...
By: josh

Continue Reading »]]> Thu, 6 Jun 2013 15:44:14 PDT http://www.instructables.com/id/Fixing-The-Upper-Portion-of-your-Lotus-Europa-Mast/
Fixing The Upper Half of your Lotus Europa Master Brake Cylinder - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FLV/BLB9/HHJO9JP0/FLVBLB9HHJO9JP0.SQUARE2.jpg http://www.instructables.com/files/deriv/FLV/BLB9/HHJO9JP0/FLVBLB9HHJO9JP0.SQUARE.jpg http://www.instructables.com/files/deriv/FLV/BLB9/HHJO9JP0/FLVBLB9HHJO9JP0.SMALL.jpg bfk The upper portion of the original Lotus Europa brake master cylinder is no longer available, so a substitution is usually used.  I, on the other hand, from years of pauper existence, have the need to hack what's broken, usually to positive results. This is no different.  Unscrew the billet aluminu...
By: bfk

Continue Reading »]]> Thu, 6 Jun 2013 10:57:23 PDT http://www.instructables.com/id/Reverse-engineering-simple-sheet-metal-brackets-F/ http://www.instructables.com/files/deriv/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SQUARE.jpg http://www.instructables.com/files/deriv/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SMALL.jpg gasketcase /* I decided to help a friend replace the radiator in his Volvo not long ago. Mistake 1! Since jacks and stands are nuisances, we decided to skip them and contort under the bumper and around the still draining coolant to reach the various elements of the radiator for removal. Following the first res...
By: gasketcase

Continue Reading »]]> Wed, 5 Jun 2013 13:55:02 PDT http://www.instructables.com/id/Center-Console-Card-Holders/
Center Console Card Holders - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FR3/BDLC/HHJDLF6U/FR3BDLCHHJDLF6U.SQUARE2.jpg http://www.instructables.com/files/deriv/FR3/BDLC/HHJDLF6U/FR3BDLCHHJDLF6U.SQUARE.jpg http://www.instructables.com/files/deriv/FR3/BDLC/HHJDLF6U/FR3BDLCHHJDLF6U.SMALL.jpg sbrown I had some leftover stick on wire harnesses from a electrical job. I attached them inside my center console to hold my various plastic cards. I don't really need my wallet on me all the time, and i hate digging through it to find my gas card. It also allows easy access to grab while at the drive thr...
By: sbrown

Continue Reading »]]> Tue, 4 Jun 2013 15:05:10 PDT http://www.instructables.com/id/Tutorial-Change-Front-Brake-Pads-and-Rotors-on-a-/ http://www.instructables.com/files/deriv/FMC/ZTGF/HHI4UKRY/FMCZTGFHHI4UKRY.SQUARE2.jpg http://www.instructables.com/files/deriv/FMC/ZTGF/HHI4UKRY/FMCZTGFHHI4UKRY.SQUARE.jpg http://www.instructables.com/files/deriv/FMC/ZTGF/HHI4UKRY/FMCZTGFHHI4UKRY.SMALL.jpg nukem384 Learn how to change the front brake pads and rotors on a 2004 Dodge Neon. Check out my web site: http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Mon, 3 Jun 2013 19:10:23 PDT http://www.instructables.com/id/VW-Hubcap-Clock/
VW Hubcap Clock - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FU1/2GJM/HHI55V4F/FU12GJMHHI55V4F.SQUARE2.jpg http://www.instructables.com/files/deriv/FU1/2GJM/HHI55V4F/FU12GJMHHI55V4F.SQUARE.jpg http://www.instructables.com/files/deriv/FU1/2GJM/HHI55V4F/FU12GJMHHI55V4F.SMALL.jpg grandpasgarage For a VW nut like me, there is only one way to spend time... Working on my VW, of course! But, alas, how do I keep track of time? Well, after countless swap meets, there came the birth of a new type of clock: a hubcap clock. Unburying The Stuff... You will need a hubcap for this project, (obviou...
By: grandpasgarage

Continue Reading »]]> Mon, 3 Jun 2013 18:52:52 PDT http://www.instructables.com/id/Honda-Odyssey-Rear-Window-Motor-Repair/
Honda Odyssey Rear Window Motor Repair - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1F/6QJZ/HHJOC58J/F1F6QJZHHJOC58J.SQUARE2.jpg http://www.instructables.com/files/deriv/F1F/6QJZ/HHJOC58J/F1F6QJZHHJOC58J.SQUARE.jpg http://www.instructables.com/files/deriv/F1F/6QJZ/HHJOC58J/F1F6QJZHHJOC58J.SMALL.jpg notsoso Honda Odysseys are notorious for having problems with the rear window motors. Fortunately they are fairly easy to repair. The problem is not the motor itself, but the connector to the motor. In this instructable I will show step by step how to remove and repair the passenger side rear window motor o...
By: notsoso

Continue Reading »]]> Mon, 3 Jun 2013 18:19:13 PDT http://www.instructables.com/id/FAUX-MAG-WHEELS-Lookin-Good-without-robbing-/
"FAUX MAG WHEELS" - Lookin' Good (without robbing a bank) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F00/B7KY/HH2VY1MV/F00B7KYHH2VY1MV.SQUARE2.jpg http://www.instructables.com/files/deriv/F00/B7KY/HH2VY1MV/F00B7KYHH2VY1MV.SQUARE.jpg http://www.instructables.com/files/deriv/F00/B7KY/HH2VY1MV/F00B7KYHH2VY1MV.SMALL.jpg irishmail The desire for a more contemporary look for my Volkswagen bug started a yearning for "Mag Wheels", or at least the look.  Hardly any cars sold today have hubcaps anymore, but the cost of a new set of rims to fit my VW was, ahem, staggering!  In this episode, I show how I transformed the (rusty) or...
By: irishmail

Continue Reading »]]> Mon, 3 Jun 2013 13:29:11 PDT http://www.instructables.com/id/Refinishing-Rims-On-A-Vehicle/
Refinishing Rims On A Vehicle - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFA/FH09/HH2VY1V2/FFAFH09HH2VY1V2.SQUARE2.jpg http://www.instructables.com/files/deriv/FFA/FH09/HH2VY1V2/FFAFH09HH2VY1V2.SQUARE.jpg http://www.instructables.com/files/deriv/FFA/FH09/HH2VY1V2/FFAFH09HH2VY1V2.SMALL.jpg dragonwolfalpha If you have old rims on your vehicle and they have rust on them, you can extend the life of your rims easily. I did this without removing the tires from the rims. First you have to remove your tires and rims from your vehicle. Set them aside. It is not completely necessary to remove the tires f...
By: dragonwolfalpha

Continue Reading »]]> Mon, 3 Jun 2013 13:28:51 PDT http://www.instructables.com/id/How-to-rebuild-a-1997-2003-4t650e-HD-transmission/
How to rebuild a 1997-2003 4t650e-HD transmission - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FCE/SGUS/HH2VL6OV/FCESGUSHH2VL6OV.SQUARE2.jpg http://www.instructables.com/files/deriv/FCE/SGUS/HH2VL6OV/FCESGUSHH2VL6OV.SQUARE.jpg http://www.instructables.com/files/deriv/FCE/SGUS/HH2VL6OV/FCESGUSHH2VL6OV.SMALL.jpg mfrontuto This instructable is for people who do not want to pay the mechanic shops several thousand dollars to rebuild the transmission in their cars. If you have some basic ( and specialty tools that can be easily bought), then you can rebuild your transmission yourself and save a few thousand dollars. I di...
By: mfrontuto

Continue Reading »]]> Sun, 2 Jun 2013 23:31:30 PDT http://www.instructables.com/id/How-To-Install-The-LED-Angel-Eyes-In-Your-BMW-Corr/ http://www.instructables.com/files/deriv/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SQUARE2.jpg http://www.instructables.com/files/deriv/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SQUARE.jpg http://www.instructables.com/files/deriv/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SMALL.jpg ilovejdmtoy Many BMW owners face difficulty while installing the BMW LED angel eyes ring marker bulbs.  While some struggle with the wiring issues, others are confused with the lighting disasters. Most of the people figure out the problem only after the installation process is complete and then they don’t know ...
By: ilovejdmtoy

Continue Reading »]]> Tue, 28 May 2013 11:26:17 PDT http://www.instructables.com/id/Water-Injection-stage-1/
Water Injection  stage 1 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FDL/KY72/HH2VN720/FDLKY72HH2VN720.SQUARE2.jpg http://www.instructables.com/files/deriv/FDL/KY72/HH2VN720/FDLKY72HH2VN720.SQUARE.jpg http://www.instructables.com/files/deriv/FDL/KY72/HH2VN720/FDLKY72HH2VN720.SMALL.jpg saftari Water Injection, also known as Wa-i It may be a bit strange to hear, injecting water into engine combustion chamber ... hmm. But it turns out that this method gives many benefits. Wa-i is not a new innovation; even it has been applied in fighter planes during the World War 2 to improve the engine ...
By: saftari

Continue Reading »]]> Mon, 27 May 2013 11:02:06 PDT http://www.instructables.com/id/How-To-Draw-A-Car-Design/
How To Draw A Car Design - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F3M/LTDG/HH2W3CVU/F3MLTDGHH2W3CVU.SQUARE2.jpg http://www.instructables.com/files/deriv/F3M/LTDG/HH2W3CVU/F3MLTDGHH2W3CVU.SQUARE.jpg http://www.instructables.com/files/deriv/F3M/LTDG/HH2W3CVU/F3MLTDGHH2W3CVU.SMALL.jpg nerfrocketeer Hello! This Instructible will show you how to draw a car that is all your own! Materialz You will need a pencil, piece of paper, and an empty scotch tape roll. Wheels Trace the inside and outside of the tape roll twice to make wheels. Bottom And Back Next, draw in a line to be the bottom a...
By: nerfrocketeer

Continue Reading »]]> Mon, 27 May 2013 09:13:31 PDT http://www.instructables.com/id/Spark-plug-change-on-a-Citroen-C3/
Spark plug change on a Citroen C3 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FYW/RTH9/HH2VLCL2/FYWRTH9HH2VLCL2.SQUARE2.jpg http://www.instructables.com/files/deriv/FYW/RTH9/HH2VLCL2/FYWRTH9HH2VLCL2.SQUARE.jpg http://www.instructables.com/files/deriv/FYW/RTH9/HH2VLCL2/FYWRTH9HH2VLCL2.SMALL.jpg cbm104 Changing spark plugs on a Citroen C3 is a nice straight forward job. How often should you change your spark plugs? The user manual suggests they should be changed every 24000 miles which for us is just over two years.  Tools: 16mm Plug socket Universal joint 10mm socket Ratchet Feeler gauges Mater...
By: cbm104

Continue Reading »]]> Sun, 26 May 2013 18:07:35 PDT http://www.instructables.com/id/How-to-changue-oil-in-brake-and-steering-wheel/
How to changue oil in brake and steering wheel. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SQUARE2.jpg http://www.instructables.com/files/deriv/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SQUARE.jpg http://www.instructables.com/files/deriv/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SMALL.jpg AlexLPD All oils in this systems got a life time period, so for prevent malfunctioning, the better is to changue it. For avoid doing a hugue mess on this, keep the things very simple and do not dissasembly many parts I show you how to make a Vaccum oil recovery unit. You will Need:   A vaccum pump     ...
By: AlexLPD

Continue Reading »]]> Fri, 24 May 2013 16:14:11 PDT http://www.instructables.com/id/carburettor-model-and-how-it-works/ http://www.instructables.com/files/deriv/FMZ/K3NM/HH2VMQA1/FMZK3NMHH2VMQA1.SQUARE2.jpg http://www.instructables.com/files/deriv/FMZ/K3NM/HH2VMQA1/FMZK3NMHH2VMQA1.SQUARE.jpg http://www.instructables.com/files/deriv/FMZ/K3NM/HH2VMQA1/FMZK3NMHH2VMQA1.SMALL.jpg danbranxl Ever wanted to make a model of a carburettor? me neither, but anyway, using a toilet roll and some other bits of cardboard you can roll it up to made a demonstration of how the venturi effect works in the carbie.  use the toilet roll and put a squire through each end. then make a valve like thing so...
By: danbranxl

Continue Reading »]]> Fri, 24 May 2013 03:26:20 PDT http://www.instructables.com/id/Easy-reach-signal-adaptation-for-single-handed-dri/
Easy reach signal lever adaptation for single handed driver - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFC/MZ7Z/HH2LF5T8/FFCMZ7ZHH2LF5T8.SQUARE2.jpg http://www.instructables.com/files/deriv/FFC/MZ7Z/HH2LF5T8/FFCMZ7ZHH2LF5T8.SQUARE.jpg http://www.instructables.com/files/deriv/FFC/MZ7Z/HH2LF5T8/FFCMZ7ZHH2LF5T8.SMALL.jpg jadebird Because of my stroke my left sid. e is weak, I drive with my right hand only. In order to signal without reaching all across the steering wheel while maintaining control of the wheel, I adapt my signal control using a good old plastic hanger. Here are some picture of the project.  Material: - plast...
By: jadebird

Continue Reading »]]> Thu, 23 May 2013 18:06:51 PDT http://www.instructables.com/id/I-made-it-at-TechShop-Sandblasting-Chevy-Pickup-/
I made it at TechShop - Sandblasting Chevy Pickup Wheels - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F52/N078/HGZO48P0/F52N078HGZO48P0.SQUARE2.jpg http://www.instructables.com/files/deriv/F52/N078/HGZO48P0/F52N078HGZO48P0.SQUARE.jpg http://www.instructables.com/files/deriv/F52/N078/HGZO48P0/F52N078HGZO48P0.SMALL.jpg techshopmember http://www.techshop.ws I never would have been able to do this without TechShop....  I took the sandblasting and powder coating class and look at what I was able to do.  Step 1 - go to the sandblaster I tried to take pictures inside the sandblaster but none of them came out.  Some tips: - Tur...
By: techshopmember

Continue Reading »]]> Tue, 21 May 2013 16:24:57 PDT http://www.instructables.com/id/Tutorial-Learn-how-to-Roll-Your-Fenders-on-a-2005/ http://www.instructables.com/files/deriv/FH7/Y6QD/HGU2PIDQ/FH7Y6QDHGU2PIDQ.SQUARE2.jpg http://www.instructables.com/files/deriv/FH7/Y6QD/HGU2PIDQ/FH7Y6QDHGU2PIDQ.SQUARE.jpg http://www.instructables.com/files/deriv/FH7/Y6QD/HGU2PIDQ/FH7Y6QDHGU2PIDQ.SMALL.jpg nukem384 Learn how to roll your fenders if you have big aftermarket wheels that stick out and give you rubbing problems. This is a pretty generic tutorial that will work on any car. Check out my web site: http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Mon, 20 May 2013 21:30:18 PDT http://www.instructables.com/id/simple-in-line-fuse-for-your-car-or-any-12-volt/
simple in-line fuse for your car... or any 12 volt system. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTT/K657/HGU2E9QJ/FTTK657HGU2E9QJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FTT/K657/HGU2E9QJ/FTTK657HGU2E9QJ.SQUARE.jpg http://www.instructables.com/files/deriv/FTT/K657/HGU2E9QJ/FTTK657HGU2E9QJ.SMALL.jpg zomfibame I had not intended on making an instructable when I started doing this but since I'd documented a few things I figured why not share the info.      I recently bought a 14 year old SUV. A Mitsubishi Montero. Most of the electrical on this old thing had been damaged and or hacked into long before I go...
By: zomfibame

Continue Reading »]]> Mon, 20 May 2013 00:39:06 PDT http://www.instructables.com/id/Illustrator-Based-Custom-Laser-Cut-License-Plate-F/
Illustrator-Based Custom Laser-Cut License Plate Frame - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FHM/5G90/HGU2OW2K/FHM5G90HGU2OW2K.SQUARE2.jpg http://www.instructables.com/files/deriv/FHM/5G90/HGU2OW2K/FHM5G90HGU2OW2K.SQUARE.jpg http://www.instructables.com/files/deriv/FHM/5G90/HGU2OW2K/FHM5G90HGU2OW2K.SMALL.jpg MisterEarl I made it at Techshop! (http://techshop.ws) Custom License Plate Frame from Cast Acrylic using Adobe Illustrator and the Trotec Laser Cutter The license plate frame is a fairly simple project that can give you professional results by following some tips and will teach you some key aspects of Illus...
By: MisterEarl

Continue Reading »]]> Sat, 18 May 2013 11:58:42 PDT http://www.instructables.com/id/Stuck-Clock-Button-On-A-2001-Accord/
Stuck Clock Button & Blown Light On A 2001 Accord - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F84/YI23/HGIEWJR2/F84YI23HGIEWJR2.SQUARE2.jpg http://www.instructables.com/files/deriv/F84/YI23/HGIEWJR2/F84YI23HGIEWJR2.SQUARE.jpg http://www.instructables.com/files/deriv/F84/YI23/HGIEWJR2/F84YI23HGIEWJR2.SMALL.jpg wongman2001 Clock on friends car never worked. Can't see at night and the hour adjust button is stuck in ! The Hour Adjust Button Is Stuck ! Very annoying, hour keeps advancing every second .... Pry Open The Clock Slip a small screw driver around the clock perimeter, gently pry open the tabs and slip out ...
By: wongman2001

Continue Reading »]]> Fri, 17 May 2013 16:38:53 PDT http://www.instructables.com/id/Re-sealing-a-windshield-gasket/ http://www.instructables.com/files/deriv/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SQUARE2.jpg http://www.instructables.com/files/deriv/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SQUARE.jpg http://www.instructables.com/files/deriv/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SMALL.jpg acevh3 The gasket had completely popped out of its channel for about 18" on the top edge of the windshield; the rest of it looked like it was still sealed in place just fine, and it was still attached to the metal trim covering. I didn't want to take the whole thing out to put in a new one, and really didn...
By: acevh3

Continue Reading »]]> Wed, 15 May 2013 23:57:48 PDT http://www.instructables.com/id/Laser-cut-Acrylic-License-Plate-Frame/
Laser-cut Acrylic License Plate Frame - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FBQ/OP0Z/HGH6QP0U/FBQOP0ZHGH6QP0U.SQUARE2.jpg http://www.instructables.com/files/deriv/FBQ/OP0Z/HGH6QP0U/FBQOP0ZHGH6QP0U.SQUARE.jpg http://www.instructables.com/files/deriv/FBQ/OP0Z/HGH6QP0U/FBQOP0ZHGH6QP0U.SMALL.jpg tcone For years, my mother refused to go rafting, despite the fact that my dad, my brother, and I took at least a trip a year as we grew up.  Finally, when both my brother and I became guides, she caved and, though apprehensive right up until we finally pushed off from the put-in beach and on edge for a g...
By: tcone

Continue Reading »]]> Tue, 14 May 2013 15:16:28 PDT http://www.instructables.com/id/Changing-a-Vauxhall-Corsa-Water-Pump/
Changing a Vauxhall Corsa Water Pump - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZV/LV6S/HFSHVYLG/FZVLV6SHFSHVYLG.SQUARE2.jpg http://www.instructables.com/files/deriv/FZV/LV6S/HFSHVYLG/FZVLV6SHFSHVYLG.SQUARE.jpg http://www.instructables.com/files/deriv/FZV/LV6S/HFSHVYLG/FZVLV6SHFSHVYLG.SMALL.jpg Scarface Claw The bearing in the water pump on my wife's car  (2002 Vauxhall Corsa C, 1.2 Ecotec engine) failed - so I decided to make this my first Instructable!  I'm keen to point out that I'm not a professional mechanic, and although this isn't the first time I've tackled a job of this nature, I'm sure there a...
By: Scarface Claw

Continue Reading »]]> Mon, 13 May 2013 15:52:23 PDT http://www.instructables.com/id/VW-Beetle-Storage-Box/
VW Beetle Storage Box - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGS/JYI7/HGH6QAH9/FGSJYI7HGH6QAH9.SQUARE2.jpg http://www.instructables.com/files/deriv/FGS/JYI7/HGH6QAH9/FGSJYI7HGH6QAH9.SQUARE.jpg http://www.instructables.com/files/deriv/FGS/JYI7/HGH6QAH9/FGSJYI7HGH6QAH9.SMALL.jpg blueangelical Having owned a '68 VW Beetle for many years now, the main problem I encounter is storage., or rather the lack of it!! The glove box is great, unless you keep your stereo in it, the wire rack thingies are great, but having had one, you do find that stuff slides out of the gaps and the drinks holder ...
By: blueangelical

Continue Reading »]]> Sun, 12 May 2013 12:08:19 PDT http://www.instructables.com/id/Tutorial-Change-Acura-RSX-Type-S-Transmission-Flu/ http://www.instructables.com/files/deriv/FF4/WC5H/HGH6XHQX/FF4WC5HHGH6XHQX.SQUARE2.jpg http://www.instructables.com/files/deriv/FF4/WC5H/HGH6XHQX/FF4WC5HHGH6XHQX.SQUARE.jpg http://www.instructables.com/files/deriv/FF4/WC5H/HGH6XHQX/FF4WC5HHGH6XHQX.SMALL.jpg nukem384 Learn how to change the tranny fluid on your Acura RSX Type S. Many other Honda's and Acura's are the exact same. Check out my web site! http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Thu, 9 May 2013 19:25:16 PDT http://www.instructables.com/id/Jeep-heart-and-Harley-soul/
Jeep heart and Harley soul... - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F6R/71QX/HFSHW48Z/F6R71QXHFSHW48Z.SQUARE2.jpg http://www.instructables.com/files/deriv/F6R/71QX/HFSHW48Z/F6R71QXHFSHW48Z.SQUARE.jpg http://www.instructables.com/files/deriv/F6R/71QX/HFSHW48Z/F6R71QXHFSHW48Z.SMALL.jpg rizingf3nix So you like your jeep wrangler on the bright sunny days with the top and doors off, but you'd love to ride it feet forward like a Harley? Here's how I did it on mine.  Note the ubiquitous disclaimer: You are responsible for how you use and interpret this information. This is simply a demo of how I ...
By: rizingf3nix

Continue Reading »]]> Mon, 6 May 2013 20:21:54 PDT http://www.instructables.com/id/How-to-Start-a-Car-After-a-Very-Very-Long-Time-in/ http://www.instructables.com/files/deriv/FGG/CNPP/HFSHUEA6/FGGCNPPHFSHUEA6.SQUARE2.jpg http://www.instructables.com/files/deriv/FGG/CNPP/HFSHUEA6/FGGCNPPHFSHUEA6.SQUARE.jpg http://www.instructables.com/files/deriv/FGG/CNPP/HFSHUEA6/FGGCNPPHFSHUEA6.SMALL.jpg mrrikjit My grandfather's brother won this car in a lottery in 1957. He had no driver's license, but his brothers used to give him a lift in it. From 1975 to 1996, the car was parked in my grandfather's brother's garage. My grandfather moved the car on a trailer in 1996 to his garage a few miles away. It has...
By: mrrikjit

Continue Reading »]]> Sat, 4 May 2013 03:57:42 PDT http://www.instructables.com/id/Tutorial-Change-Your-Acura-RSX-Type-S-Spark-Plugs/ http://www.instructables.com/files/deriv/FHU/EDO6/HFPTET3S/FHUEDO6HFPTET3S.SQUARE2.jpg http://www.instructables.com/files/deriv/FHU/EDO6/HFPTET3S/FHUEDO6HFPTET3S.SQUARE.jpg http://www.instructables.com/files/deriv/FHU/EDO6/HFPTET3S/FHUEDO6HFPTET3S.SMALL.jpg nukem384 Learn how to change the spark plugs on your Acura RSX Type S.  Basically any car, this procedure will work. Check out my web site! http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Thu, 2 May 2013 18:52:06 PDT http://www.instructables.com/id/1990-Mustang-GT-Info-Center/ http://www.instructables.com/files/deriv/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SQUARE2.jpg http://www.instructables.com/files/deriv/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SQUARE.jpg http://www.instructables.com/files/deriv/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SMALL.jpg TankMorph *** UPDATE: v3.6 includes fixes to time and RTC time to display before GPS signal lock *** *** NEXT: hook up and calibrate the outside temp sensor *** This Arduino project uses a 20x4 LCD I installed in place of my stock speedometer to display useful information similar to this: €€ˆ €€ˆ       12:...
By: TankMorph

Continue Reading »]]> Wed, 1 May 2013 23:47:43 PDT http://www.instructables.com/id/Remove-the-front-clip-from-your-1979-Camaro/
Remove the front clip from your 1979 Camaro - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SQUARE2.jpg http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SQUARE.jpg http://www.instructables.com/files/deriv/FEW/Q89Y/HFSHUP9E/FEWQ89YHFSHUP9E.SMALL.jpg Skylberg If you are doing some serious repairs this may be worth your while.  This will help you remove the front clip in one piece.  The front fenders, hood, inner fenders, radiator support, front bumper, radiator, condenser and front end will all come off in one piece.  What you will need 3/8" socket 1...
By: Skylberg

Continue Reading »]]> Tue, 30 Apr 2013 08:48:15 PDT http://www.instructables.com/id/Tutorial-Change-Your-Acura-RSX-Type-S-Cabin-Air-F/ http://www.instructables.com/files/deriv/FFH/OA52/HFSHTVMK/FFHOA52HFSHTVMK.SQUARE2.jpg http://www.instructables.com/files/deriv/FFH/OA52/HFSHTVMK/FFHOA52HFSHTVMK.SQUARE.jpg http://www.instructables.com/files/deriv/FFH/OA52/HFSHTVMK/FFHOA52HFSHTVMK.SMALL.jpg nukem384 Learn how to change the cabin air filter in your Acura RSX Type S.  This tutorial is the same on many other Honda and Acura models. Check out my web site! http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Mon, 29 Apr 2013 21:06:06 PDT http://www.instructables.com/id/Auto-Remote-Key-Repair-for-05-Jeep-Grand-Cherokee-/
Auto Remote Key Repair for 05 Jeep Grand Cherokee (May work for other vehicles) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FMO/WOSF/HFPTIO0H/FMOWOSFHFPTIO0H.SQUARE2.jpg http://www.instructables.com/files/deriv/FMO/WOSF/HFPTIO0H/FMOWOSFHFPTIO0H.SQUARE.jpg http://www.instructables.com/files/deriv/FMO/WOSF/HFPTIO0H/FMOWOSFHFPTIO0H.SMALL.jpg joker31698 I wanted to share this instructable with others, since it has saved me $200 so far+. I recently had my key remote stop working on me or it would intermitantly work, causing me to have to unlock my door with the key, which in turn would activate the alarm until I started my vehicle. At first I though...
By: joker31698

Continue Reading »]]> Mon, 29 Apr 2013 17:32:10 PDT http://www.instructables.com/id/Tutorial-Change-Your-Acura-RSX-Air-Filter/ http://www.instructables.com/files/deriv/F9D/EWIO/HFPTI65L/F9DEWIOHFPTI65L.SQUARE2.jpg http://www.instructables.com/files/deriv/F9D/EWIO/HFPTI65L/F9DEWIOHFPTI65L.SQUARE.jpg http://www.instructables.com/files/deriv/F9D/EWIO/HFPTI65L/F9DEWIOHFPTI65L.SMALL.jpg nukem384 Learn how to change the air filter on your 2002-2006 Acura RSX. Very simple install with just a few tools. Check out my web site! http://nukem384.blogspot.com
By: nukem384

Continue Reading »]]> Thu, 25 Apr 2013 20:31:23 PDT http://www.instructables.com/id/Truckers-Steering-Wheel-Desk/
Truckers Steering Wheel Desk - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FU6/H1TA/HFWST8PW/FU6H1TAHFWST8PW.SQUARE2.jpg http://www.instructables.com/files/deriv/FU6/H1TA/HFWST8PW/FU6H1TAHFWST8PW.SQUARE.jpg http://www.instructables.com/files/deriv/FU6/H1TA/HFWST8PW/FU6H1TAHFWST8PW.SMALL.jpg wheeljam WARNING!!!!!!!!!!!!!!!!!!!!!!! DO NOT USE THIS WHILE DRIVING. FOR USE WHILE PARKING ONLY!!!!!!!!!!!!!!!!!!!!! OK this is my first Instructable, so please me nice. When sitting at a truck stop waiting for a load it is easier to use the laptop while sitting at the steering wheel. Problem is my lapto...
By: wheeljam

Continue Reading »]]> Thu, 25 Apr 2013 07:23:09 PDT http://www.instructables.com/id/HID-Bi-Xenon-Retrofit-For-1995-240SX-Nissan/
HID Bi-Xenon Retrofit For 1995 240SX Nissan - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5E/B5W2/HFSHVKZP/F5EB5W2HFSHVKZP.SQUARE2.jpg http://www.instructables.com/files/deriv/F5E/B5W2/HFSHVKZP/F5EB5W2HFSHVKZP.SQUARE.jpg http://www.instructables.com/files/deriv/F5E/B5W2/HFSHVKZP/F5EB5W2HFSHVKZP.SMALL.jpg dubL_1eR ok i won't get into taking headlights apart or wiring HID lights . people have done write ups on this so don't be lazy do your research!! Source Parts. i already had a quad projector retrofit , but if you don't, go to TheRetrofitSource and get some good quality projectors, ballast, bulbs, and rel...
By: dubL_1eR

Continue Reading »]]> Wed, 24 Apr 2013 19:10:32 PDT http://www.instructables.com/id/Aux-in-jack-for-VDO-RD3-00-car-radio-Peugeot-Cit/
Aux-in jack for VDO RD3-00 car radio (Peugeot, Citroen) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FSX/DLN3/HFSHECIV/FSXDLN3HFSHECIV.SQUARE2.jpg http://www.instructables.com/files/deriv/FSX/DLN3/HFSHECIV/FSXDLN3HFSHECIV.SQUARE.jpg http://www.instructables.com/files/deriv/FSX/DLN3/HFSHECIV/FSXDLN3HFSHECIV.SMALL.jpg alessandro.blaco I owe a Citroen Berlingo 2002, problem is no audio in. The result is a 3.5mm female jack getting out the radio. So when you want to listen to music, set the volume of the radio down to minimum, connect your mp3 player (phone, ipod, etc.) and click play! We need to remove and disassemble the radio ...
By: alessandro.blaco

Continue Reading »]]> Tue, 23 Apr 2013 09:59:41 PDT http://www.instructables.com/id/dent-b-gone-dent-puller/ http://www.instructables.com/files/deriv/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SQUARE2.jpg http://www.instructables.com/files/deriv/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SQUARE.jpg http://www.instructables.com/files/deriv/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SMALL.jpg crogers11 I was rear ended and the tail of the honda was folded in.  I am going to remove these dents at Techshop.  Techshop has some dent puller devices, but I wanted a larger slide hammer to work on the honda.  I made this slide hammer at Techshop using the sand blaster, metal cut shop saw, drill press  and...
By: crogers11

Continue Reading »]]> Mon, 22 Apr 2013 13:04:42 PDT http://www.instructables.com/id/Leaking-exhaust-muffler-silencer-repair-with-r/ http://www.instructables.com/files/deriv/F3T/G9DC/HFPTRN8P/F3TG9DCHFPTRN8P.SQUARE2.jpg http://www.instructables.com/files/deriv/F3T/G9DC/HFPTRN8P/F3TG9DCHFPTRN8P.SQUARE.jpg http://www.instructables.com/files/deriv/F3T/G9DC/HFPTRN8P/F3TG9DCHFPTRN8P.SMALL.jpg mrrikjit Leaking exhaust / muffler / silencer repair with repair paste and epoxy bandage strips kit on a Toyota Hilux.
By: mrrikjit

Continue Reading »]]> Sun, 21 Apr 2013 06:21:06 PDT