http://www.instructables.com Thu, 20 Jun 2013 02:30:05 PDT BLOX v1.01 http://www.instructables.com/id/Portal-Companion-Cube/
Portal Companion Cube - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FX7/W8VR/HHS9VPBT/FX7W8VRHHS9VPBT.SQUARE2.jpg http://www.instructables.com/files/deriv/FX7/W8VR/HHS9VPBT/FX7W8VRHHS9VPBT.SQUARE.jpg http://www.instructables.com/files/deriv/FX7/W8VR/HHS9VPBT/FX7W8VRHHS9VPBT.SMALL.jpg matson23 Hello, I'm new to this, and new to taking pictures of a build and measurements to show other people, I normally do most of it in my head or on bits of scrap etc etc, then it gets lost in translation, but I wanted to document a build just to see what it was like,and quite honestly writing it all down...
By: matson23

Continue Reading »]]> Sat, 15 Jun 2013 12:26:29 PDT http://www.instructables.com/id/Grow-Your-Own-Zombie-A-Fun-PropDecoration/
Zombie in a Pot- A Fun Prop/Decoration - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FQS/EZ14/HHOFPDJ1/FQSEZ14HHOFPDJ1.SQUARE2.jpg http://www.instructables.com/files/deriv/FQS/EZ14/HHOFPDJ1/FQSEZ14HHOFPDJ1.SQUARE.jpg http://www.instructables.com/files/deriv/FQS/EZ14/HHOFPDJ1/FQSEZ14HHOFPDJ1.SMALL.jpg M3G I've always wanted my own zombie, but not one of those run-of-the-mill zombies you can pick up during any old apocalypse. No, I wanted my own homegrown zombie. So I went down to my local black magic practitioner's store and bought me some organic zombie seeds. A few months of tender care later I had...
By: M3G

Continue Reading »]]> Mon, 10 Jun 2013 09:57:21 PDT http://www.instructables.com/id/Ironman-Arc-Reactor-v2-laser-cut/
Ironman Arc Reactor v2 - laser cut - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FIE/U5HU/HH2VW4G6/FIEU5HUHH2VW4G6.SQUARE2.jpg http://www.instructables.com/files/deriv/FIE/U5HU/HH2VW4G6/FIEU5HUHH2VW4G6.SQUARE.jpg http://www.instructables.com/files/deriv/FIE/U5HU/HH2VW4G6/FIEU5HUHH2VW4G6.SMALL.jpg Gixxer85 Earlier this year i made something like this below with bunches of foam strips , small plastic food container and some random pieces i had around in my room.  Anyway, before the Ironman3 releases, I decided to make a new and smaller one version that only 15mm thick. using the  main picture as a refe...
By: Gixxer85

Continue Reading »]]> Mon, 27 May 2013 10:58:38 PDT http://www.instructables.com/id/Make-a-Daft-Punk-Helmet-in-Progress/
Make a Daft Punk Helmet - More DIY How To Projects]]> http://cdn.instructables.com/FRN/89CG/FUI0SND0/FRN89CGFUI0SND0.SQUARE2.jpg http://cdn.instructables.com/FRN/89CG/FUI0SND0/FRN89CGFUI0SND0.SQUARE.jpg http://cdn.instructables.com/FRN/89CG/FUI0SND0/FRN89CGFUI0SND0.SMALL.jpg Ben Harden Don't even dare read this Instructable unless you have read Volpin's Daft Punk helmet tutorial first. If you're satisfied with sub-par, stay on this page. If you want perfection GO READ HIS RIGHT NOW. This instructable shows how YOU can make a Thomas Bangalter Daft Punk helmet. I watched a lot of y...
By: Ben Harden

Continue Reading »]]> Fri, 17 Apr 2009 20:12:07 PDT http://www.instructables.com/id/Build-an-Arc-Reactor-with-Basic-Tools-and-Skills/
Build an Arc Reactor with Basic Tools and Skills - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F9N/3T2Y/GFRWQQN4/F9N3T2YGFRWQQN4.SQUARE2.jpg http://www.instructables.com/files/deriv/F9N/3T2Y/GFRWQQN4/F9N3T2YGFRWQQN4.SQUARE.jpg http://www.instructables.com/files/deriv/F9N/3T2Y/GFRWQQN4/F9N3T2YGFRWQQN4.SMALL.jpg belectric23 I thought it would be cool to go as Tony Stark for Halloween, and I turned to Instructables for ideas on how to build an Arc Reactor. The problem is that the best and most accurate Arc Reactors on the site like Honus' and Kyling Zhang's, or ones featured elsewhere like Indy Mogul require precision m...
By: belectric23

Continue Reading »]]> Sun, 31 Oct 2010 13:45:36 PDT http://www.instructables.com/id/Handmade-kids-wood-kitchen-for-under-100/
Handmade kids wood kitchen for under $100 - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAF/VKEJ/GPLJ1F33/FAFVKEJGPLJ1F33.SQUARE2.jpg http://www.instructables.com/files/deriv/FAF/VKEJ/GPLJ1F33/FAFVKEJGPLJ1F33.SQUARE.jpg http://www.instructables.com/files/deriv/FAF/VKEJ/GPLJ1F33/FAFVKEJGPLJ1F33.SMALL.jpg Jesswilde My little girl is growing up and I wanted to get her a little kitchen to play with.  I had heard of people turning old entertainment centers into kitchens and decided to try it out.  While I was measuring to see what would fit I saw my corner desk and knew it would be perfect for this project!  I ...
By: Jesswilde

Continue Reading »]]> Mon, 4 Jul 2011 00:13:50 PDT http://www.instructables.com/id/Brain-Slug-2/
Brain Slug - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F89/PS6J/HDOWA8Q0/F89PS6JHDOWA8Q0.SQUARE2.jpg http://www.instructables.com/files/deriv/F89/PS6J/HDOWA8Q0/F89PS6JHDOWA8Q0.SQUARE.jpg http://www.instructables.com/files/deriv/F89/PS6J/HDOWA8Q0/F89PS6JHDOWA8Q0.SMALL.jpg Silvamord Anyone who is a fan of Futurama knows what a Brain Slug is! In this tutorial, I'm going to show you how to make a Brain Slug out of floral foam. As a warning, floral foam is incredibly malleable, however it also will get dented/scratched very easily and will absorb vast amounts of water. So this is ...
By: Silvamord

Continue Reading »]]> Tue, 7 May 2013 21:19:57 PDT http://www.instructables.com/id/Arc-Reactor-1/
Arc Reactor - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FNN/EBAQ/GUI4WYOH/FNNEBAQGUI4WYOH.SQUARE2.jpg http://www.instructables.com/files/deriv/FNN/EBAQ/GUI4WYOH/FNNEBAQGUI4WYOH.SQUARE.jpg http://www.instructables.com/files/deriv/FNN/EBAQ/GUI4WYOH/FNNEBAQGUI4WYOH.SMALL.jpg Gordon Gekko After seeing Iron Man in the theater I knew I had to recreate Tony Starks Arc Reactor. Specifically I wanted the RT1 that Pepper Potts had displayed in the glass case for Tony. The "Proof That Tony Stark Has A Heart" Arc Reactor. Below is a comparison of the Arc seen in the movie and the one I built...
By: Gordon Gekko

Continue Reading »]]> Wed, 2 Nov 2011 10:46:53 PDT http://www.instructables.com/id/ED-EDD-N-EDDY-How-to-make-Johnnys-PLANK/
ED EDD 'N' EDDY: How to make Johnny's "PLANK" - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJH/KEM0/HG85C7F5/FJHKEM0HG85C7F5.SQUARE2.jpg http://www.instructables.com/files/deriv/FJH/KEM0/HG85C7F5/FJHKEM0HG85C7F5.SQUARE.jpg http://www.instructables.com/files/deriv/FJH/KEM0/HG85C7F5/FJHKEM0HG85C7F5.SMALL.jpg HPandLOTR I don't know if you've ever seen the show, but in "ed edd 'n' eddy" that strange kid with the bald head, Johnny, carries around his only friend "Plank". Basically, Plank is a plank of wood with a funny face on it. But if you look at all the details in the drawings of him, you could get it just right...
By: HPandLOTR

Continue Reading »]]> Thu, 2 May 2013 16:00:31 PDT http://www.instructables.com/id/Fallout-3-Brotherhood-of-Steel-Helmet/
Fallout 3- Brotherhood of Steel Helmet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5K/UMZC/H19RHPLS/F5KUMZCH19RHPLS.SQUARE2.jpg http://www.instructables.com/files/deriv/F5K/UMZC/H19RHPLS/F5KUMZCH19RHPLS.SQUARE.jpg http://www.instructables.com/files/deriv/F5K/UMZC/H19RHPLS/F5KUMZCH19RHPLS.SMALL.jpg Josh Jay In this tutorial, I will show you how to create a helmet based on the Brotherhood of Steel from Fallout 3.  The finished helmet is comprised of a main body and a series of numerous attached accessories. This guide will take you through the process of: Planning Helmet Modeling Helmet Mo...
By: Josh Jay

Continue Reading »]]> Mon, 23 Apr 2012 16:28:18 PDT http://www.instructables.com/id/Call-of-Duty-Ray-Gun-1/
Call of Duty : Ray Gun - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F0T/4A14/HFSHTBTL/F0T4A14HFSHTBTL.SQUARE2.jpg http://www.instructables.com/files/deriv/F0T/4A14/HFSHTBTL/F0T4A14HFSHTBTL.SQUARE.jpg http://www.instructables.com/files/deriv/F0T/4A14/HFSHTBTL/F0T4A14HFSHTBTL.SMALL.jpg YFX   This project commenced as soon as I saw the game of life contest open. I did not see many people build the ray gun so I decided to go for it! I used the to scale blueprints to assist me and make reference to throughout the project. I found them really helpful and I hope you will too. Link : http:/...
By: YFX

Continue Reading »]]> Mon, 29 Apr 2013 10:14:44 PDT http://www.instructables.com/id/BECOMING-STARK-An-in-depth-tutorial-on-making-Iro/
Iron Man War Machine Helmet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FDY/EUKW/GI0TCXT9/FDYEUKWGI0TCXT9.SQUARE2.jpg http://www.instructables.com/files/deriv/FDY/EUKW/GI0TCXT9/FDYEUKWGI0TCXT9.SQUARE.jpg http://www.instructables.com/files/deriv/FDY/EUKW/GI0TCXT9/FDYEUKWGI0TCXT9.SMALL.jpg Jeprachaun For a long time I've been curious to jump into the world of costume building, and this Christmas break it made the perfect project. I dived head first into the fun and quirky world of Pepakura. Pepakura is a program that takes 3D models and unfolds them into a series of 2D pieces that can be printe...
By: Jeprachaun

Continue Reading »]]> Tue, 28 Dec 2010 16:56:30 PST http://www.instructables.com/id/Metal-Doctor-Who-Sonic-Screwdriver-with-Arduino/
Metal Doctor Who Sonic Screwdriver with Arduino - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1A/624W/HFPTHO48/F1A624WHFPTHO48.SQUARE2.jpg http://www.instructables.com/files/deriv/F1A/624W/HFPTHO48/F1A624WHFPTHO48.SQUARE.jpg http://www.instructables.com/files/deriv/F1A/624W/HFPTHO48/F1A624WHFPTHO48.SMALL.jpg MrTinkerer How to machine / make a custom sonic screwdriver out of aluminum with Arduino inside. This Instructable documents the creation of two custom Sonic Screwdrivers for two very special people in my life. They are huge  Doctor Who fans and I could not resist making this for them. Please note this...
By: MrTinkerer

Continue Reading »]]> Thu, 25 Apr 2013 23:16:10 PDT http://www.instructables.com/id/3D-Life-size-Ironman/
3D Life size Ironman - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4J/P31J/HFSHVGPW/F4JP31JHFSHVGPW.SQUARE2.jpg http://www.instructables.com/files/deriv/F4J/P31J/HFSHVGPW/F4JP31JHFSHVGPW.SQUARE.jpg http://www.instructables.com/files/deriv/F4J/P31J/HFSHVGPW/F4JP31JHFSHVGPW.SMALL.jpg ragu1975 A life size 3D Ironman with light up eyes, arc reactor, and thrusters. I built him completely out of foam board and with LEDs for the lit up portions. My beginning details in black on the piece were all cut out of vinyl (which the Zing 16 Laser would've come in handy with...and I may have even been ...
By: ragu1975

Continue Reading »]]> Tue, 23 Apr 2013 19:09:32 PDT http://www.instructables.com/id/Creating-a-Knife-From-a-Lawnmower-Blade/
Creating a Knife From a Lawnmower Blade - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FNZ/9210/HFSH4WZF/FNZ9210HFSH4WZF.SQUARE2.jpg http://www.instructables.com/files/deriv/FNZ/9210/HFSH4WZF/FNZ9210HFSH4WZF.SQUARE.jpg http://www.instructables.com/files/deriv/FNZ/9210/HFSH4WZF/FNZ9210HFSH4WZF.SMALL.jpg HeWhoMakesStuff The shop I work at  recently got a whole bunch of lawn mower blades so I have been trying to find things to make them into. One of the things that occurred to me was if lawn mower blades are strong enough to hit a rock then they might be a good candidate to make knives. In addition to the instructi...
By: HeWhoMakesStuff

Continue Reading »]]> Mon, 22 Apr 2013 20:00:29 PDT http://www.instructables.com/id/The-Uses-For-A-Coin/
The Uses For A Coin - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FYU/UG1H/HFSHSC1X/FYUUG1HHFSHSC1X.SQUARE2.jpg http://www.instructables.com/files/deriv/FYU/UG1H/HFSHSC1X/FYUUG1HHFSHSC1X.SQUARE.jpg http://www.instructables.com/files/deriv/FYU/UG1H/HFSHSC1X/FYUUG1HHFSHSC1X.SMALL.jpg tanksterbot Imagine this scenario: You're bored at work home or anywhere you have a few coins in your pocket, what should you do? Well this instructable will tell you exactly what you could do!!! If your on your own or with a group here is a few things to do. Hockey Whip out a stick of some sort, possibly a ...
By: tanksterbot

Continue Reading »]]> Mon, 22 Apr 2013 00:04:50 PDT http://www.instructables.com/id/Tardis-Pull-String-Pinata/
Tardis Pull String Pinata - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FXK/290Y/HFPTF60M/FXK290YHFPTF60M.SQUARE2.jpg http://www.instructables.com/files/deriv/FXK/290Y/HFPTF60M/FXK290YHFPTF60M.SQUARE.jpg http://www.instructables.com/files/deriv/FXK/290Y/HFPTF60M/FXK290YHFPTF60M.SMALL.jpg Mostlymade For the avid Dr. Who fan in your life, nothing livens up a birthday party like a pinata in the shape of the iconic Tardis phone booth. Luckily it is a very simple shape, so here are instructions on how to make a good looking, tardis which you can use over and over, OR, if you want, just to make a sc...
By: Mostlymade

Continue Reading »]]> Sun, 21 Apr 2013 04:14:00 PDT http://www.instructables.com/id/IRON-MACE/
IRON FLAIL. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJT/BDN8/HFD1F6EH/FJTBDN8HFD1F6EH.SQUARE2.jpg http://www.instructables.com/files/deriv/FJT/BDN8/HFD1F6EH/FJTBDN8HFD1F6EH.SQUARE.jpg http://www.instructables.com/files/deriv/FJT/BDN8/HFD1F6EH/FJTBDN8HFD1F6EH.SMALL.jpg Mr.Sanchez Is there anything cooler , Stronger, baddest that Epic Game weapons?  When you choose the weapon that helps you in the Quest,It should be able to handle just about anything life throws your way. If you are a fierce warrior that slash hordes of orcs and other evil armies, don´t you think that would ...
By: Mr.Sanchez

Continue Reading »]]> Tue, 16 Apr 2013 08:55:27 PDT http://www.instructables.com/id/Making-Rupees-from-Legend-of-Zelda/
Making Rupees from Legend of Zelda - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTP/GUKL/HFD17916/FTPGUKLHFD17916.SQUARE2.jpg http://www.instructables.com/files/deriv/FTP/GUKL/HFD17916/FTPGUKLHFD17916.SQUARE.jpg http://www.instructables.com/files/deriv/FTP/GUKL/HFD17916/FTPGUKLHFD17916.SMALL.jpg Eric Hart I recently made some props for a local theatre group that was producing a musical version of "The Legend of Zelda: The Ocarina of Time." One of the key props from all the Zelda series are the "rupees", a gemstone used primarily to purchase items within the game. The theatre group wanted a red, green...
By: Eric Hart

Continue Reading »]]> Wed, 17 Apr 2013 08:53:56 PDT http://www.instructables.com/id/Stage-Prop-with-built-in-Tiny-Fogger-and-Fog-Chill/
Stage Prop with built-in Tiny Fogger and Fog Chiller (on the cheap) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FP1/0IQ2/HFD1DHT5/FP10IQ2HFD1DHT5.SQUARE2.jpg http://www.instructables.com/files/deriv/FP1/0IQ2/HFD1DHT5/FP10IQ2HFD1DHT5.SQUARE.jpg http://www.instructables.com/files/deriv/FP1/0IQ2/HFD1DHT5/FP10IQ2HFD1DHT5.SMALL.jpg uersel aka "Low Budget Small Ground Fogger - Part 2" This is a stage prop for the play "Killerinstinkt" which will have it's premiere on stage in about two weeks. It will be the centre piece on a fancy modern dinner table which should resemble the so called "molecular kitchen" style. As the table is set o...
By: uersel

Continue Reading »]]> Sat, 13 Apr 2013 14:46:00 PDT http://www.instructables.com/id/Fake-Jail-Cell/
Fake Jail Cell Prop for Pictures - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F3M/1YEO/H3Z3V2QK/F3M1YEOH3Z3V2QK.SQUARE2.jpg http://www.instructables.com/files/deriv/F3M/1YEO/H3Z3V2QK/F3M1YEOH3Z3V2QK.SQUARE.jpg http://www.instructables.com/files/deriv/F3M/1YEO/H3Z3V2QK/F3M1YEOH3Z3V2QK.SMALL.jpg sailormoon22491 This project shows how I created a simple, fake jail cell. My cousin recently graduated from the Police Academy and my aunt is having a party to celebrate. She asked if my family could design and build a simple jail cell that people can stand in for pictures. The project is basic and gives a fun re...
By: sailormoon22491

Continue Reading »]]> Sat, 30 Jun 2012 13:32:11 PDT http://www.instructables.com/id/Goldeneye-007-Remote-Mine-Prop/
Goldeneye 007 Remote Mine Prop - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FU5/WIPA/GRAEB19P/FU5WIPAGRAEB19P.SQUARE2.jpg http://www.instructables.com/files/deriv/FU5/WIPA/GRAEB19P/FU5WIPAGRAEB19P.SQUARE.jpg http://www.instructables.com/files/deriv/FU5/WIPA/GRAEB19P/FU5WIPAGRAEB19P.SMALL.jpg shaneblomberg How to build a functional movie prop "Remote Mine" (If you can't find the parts to make your own, as a few are hard to track down, head over to my other project where you can 3D print the parts instead: http://www.instructables.com/id/3D-printed-Goldeneye-007-Remote-Mine-With-beeper-/   ) If you re...
By: shaneblomberg

Continue Reading »]]> Tue, 16 Aug 2011 13:39:42 PDT http://www.instructables.com/id/DA-OTF-Hidden-Blade/
DA OTF Hidden Blade - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F33/9J4J/HET0R3U6/F339J4JHET0R3U6.SQUARE2.jpg http://www.instructables.com/files/deriv/F33/9J4J/HET0R3U6/F339J4JHET0R3U6.SQUARE.jpg http://www.instructables.com/files/deriv/F33/9J4J/HET0R3U6/F339J4JHET0R3U6.SMALL.jpg LostRite This is the re-make of the hidden blase models from the Assassin's Creed video game. This version is a dual-action out-the-front model which means that it uses the same finger motion to alternate between spring-launching and spring-retracting the blade. The majority of the pieces were 3D printed wit...
By: LostRite

Continue Reading »]]> Sat, 30 Mar 2013 01:20:48 PDT http://www.instructables.com/id/3D-printed-Goldeneye-007-Remote-Mine-With-beeper-/
3D printed Goldeneye 007 Remote Mine (With beeper + blinking LEDs) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FPX/KBSO/HERLNARZ/FPXKBSOHERLNARZ.SQUARE2.jpg http://www.instructables.com/files/deriv/FPX/KBSO/HERLNARZ/FPXKBSOHERLNARZ.SQUARE.jpg http://www.instructables.com/files/deriv/FPX/KBSO/HERLNARZ/FPXKBSOHERLNARZ.SMALL.jpg shaneblomberg The year is 1997. The game, Goldeneye 64. The weapon, The Remote Mine. Hours and hours spent glued to your mom's TV with your friends, trying to say they were screen watching at 2am. Does this sound like the vast majority of your childhood? If so, please   read on! If you have ever wanted you...
By: shaneblomberg

Continue Reading »]]> Wed, 27 Mar 2013 09:01:53 PDT http://www.instructables.com/id/Boredom-Survival-Kit/
Boredom Survival Kit - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZ6/3B7V/HERLT2PA/FZ63B7VHERLT2PA.SQUARE2.jpg http://www.instructables.com/files/deriv/FZ6/3B7V/HERLT2PA/FZ63B7VHERLT2PA.SQUARE.jpg http://www.instructables.com/files/deriv/FZ6/3B7V/HERLT2PA/FZ63B7VHERLT2PA.SMALL.jpg gandalf2002 The Stuff You need a small box, Captain America's shield, a magnifying glass, dice, lightsaber, marble, mini flashlight, pawn (chess), rubber band and paperclip! Open The Box Open the box. Start Putting Stuff In Put the stiff in the box!!! Close The Box Close the box. You Are Done Th...
By: gandalf2002

Continue Reading »]]> Tue, 26 Mar 2013 15:31:05 PDT http://www.instructables.com/id/Iron-Man-3-Arc-Reactor/
Iron Man 3 Arc Reactor. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAN/R1P5/HE081HLW/FANR1P5HE081HLW.SQUARE2.jpg http://www.instructables.com/files/deriv/FAN/R1P5/HE081HLW/FANR1P5HE081HLW.SQUARE.jpg http://www.instructables.com/files/deriv/FAN/R1P5/HE081HLW/FANR1P5HE081HLW.SMALL.jpg backwards lamb As has been said in my previous Arc reactor instructables, I love Iron man. first Arc http://www.instructables.com/id/How-to-build-iron-mans-arc-reactor/ Whiplash Arc: http://www.instructables.com/id/Whiplash-Arc-reactor-MK-II/ iron man 2 arc: http://www.instructables.com/id/Iron-man-2-Arc-reacto...
By: backwards lamb

Continue Reading »]]> Mon, 11 Mar 2013 15:43:29 PDT http://www.instructables.com/id/Liberty-Bell-Replica/
Liberty Bell Replica - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F3O/1NUQ/HCV97KFS/F3O1NUQHCV97KFS.SQUARE2.jpg http://www.instructables.com/files/deriv/F3O/1NUQ/HCV97KFS/F3O1NUQHCV97KFS.SQUARE.jpg http://www.instructables.com/files/deriv/F3O/1NUQ/HCV97KFS/F3O1NUQHCV97KFS.SMALL.jpg JML Enterprises In September, 2010, I volunteered to build a float for a Halloween parade. The theme of the float was patriotic / historical, incorporating historical US flags and a replica of the Liberty Bell. For some time I had wanted to experiment with sculpting with extruded polystyrene (XPS) foam, so this pro...
By: JML Enterprises

Continue Reading »]]> Mon, 4 Mar 2013 10:36:05 PST http://www.instructables.com/id/Deadmau5-Head-2/
Deadmau5 Head - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FBK/XQK4/H2WESKT4/FBKXQK4H2WESKT4.SQUARE2.jpg http://www.instructables.com/files/deriv/FBK/XQK4/H2WESKT4/FBKXQK4H2WESKT4.SQUARE.jpg http://www.instructables.com/files/deriv/FBK/XQK4/H2WESKT4/FBKXQK4H2WESKT4.SMALL.jpg sd2kool4u EDIT-- ADDED STYRAFOAM EARS So I've seen all of those deadmau5 heads and i like them....but they don't hav to same look I thought so i teamed up with my dad and this is what we did. Materials: Polystyrene Foam-home Depot 2-4.5" acrlic globes-home depot 1-13" hamster ball-pet store white mesh-publi...
By: sd2kool4u

Continue Reading »]]> Sat, 2 Jun 2012 13:16:03 PDT http://www.instructables.com/id/Iron-man-2-Arc-reactor-VII/
Iron man 2 Arc reactor VI - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFD/TV3N/HDOVWGUQ/FFDTV3NHDOVWGUQ.SQUARE2.jpg http://www.instructables.com/files/deriv/FFD/TV3N/HDOVWGUQ/FFDTV3NHDOVWGUQ.SQUARE.jpg http://www.instructables.com/files/deriv/FFD/TV3N/HDOVWGUQ/FFDTV3NHDOVWGUQ.SMALL.jpg backwards lamb Recently i have been re working my first iron man Arc reactor to stream line the production time etc. i decided to take a look at making the Arc reactor from the second film.  so this is how i went about making my Iron man 2 arc reactor. Tools and materials. Tools: - sand paper - files - small ...
By: backwards lamb

Continue Reading »]]> Fri, 1 Mar 2013 01:44:40 PST http://www.instructables.com/id/Giant-Fire-Breathing-Dragon-Puppet/
Giant Fire-Breathing Dragon Puppet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F9U/K4C4/HD4VDXRZ/F9UK4C4HD4VDXRZ.SQUARE2.jpg http://www.instructables.com/files/deriv/F9U/K4C4/HD4VDXRZ/F9UK4C4HD4VDXRZ.SQUARE.jpg http://www.instructables.com/files/deriv/F9U/K4C4/HD4VDXRZ/F9UK4C4HD4VDXRZ.SMALL.jpg treese1 Hello members of the interwebs,  Have you ever wondered what your life is missing?  Is it potatoes? Dirty dishes? Famine? Meteors? An understanding of string theory? No, it's none of THOSE things. What your life is missing is more GIANT DRAGON PUPPETS. But fear not, for now you too can build your...
By: treese1

Continue Reading »]]> Tue, 26 Feb 2013 13:58:48 PST http://www.instructables.com/id/Black-Gold-Saw-Sword/
Black Gold Saw Sword - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F43/N7GI/HAQ36SVH/F43N7GIHAQ36SVH.SQUARE2.jpg http://www.instructables.com/files/deriv/F43/N7GI/HAQ36SVH/F43N7GIHAQ36SVH.SQUARE.jpg http://www.instructables.com/files/deriv/F43/N7GI/HAQ36SVH/F43N7GIHAQ36SVH.SMALL.jpg Dadime Hello, here I am with a second installation of props for my childrens Cosplay at San Japan Mach 5.  My son went as a male version of a character called Black Gold Saw from the Black Rock Shooter OVA. This character carried a large sword. I present to you my version of this weapon and its build. ...
By: Dadime

Continue Reading »]]> Sun, 24 Feb 2013 13:09:57 PST http://www.instructables.com/id/How-to-make-Sting-from-The-Hobbit/ http://www.instructables.com/files/deriv/F9D/OVC2/HD7U0GF0/F9DOVC2HD7U0GF0.SQUARE2.jpg http://www.instructables.com/files/deriv/F9D/OVC2/HD7U0GF0/F9DOVC2HD7U0GF0.SQUARE.jpg http://www.instructables.com/files/deriv/F9D/OVC2/HD7U0GF0/F9DOVC2HD7U0GF0.SMALL.jpg allhailskippy Materials You'll need the following: Foam board The pattern printed on sticker paper (Available at my website: http://bit.ly/1352a00) Scissors Xcato knife Good quality masking tape A marker A hot glue gun A meter stick (or a steady hand) Silver, Brown and Black spray paint Painters tape Crazy g...
By: allhailskippy

Continue Reading »]]> Fri, 22 Feb 2013 07:29:59 PST http://www.instructables.com/id/Simple-Silicone-Rubber-Molds-no-parting-line/ http://www.instructables.com/files/deriv/FOA/5X90/FALOLDR6/FOA5X90FALOLDR6.SQUARE2.jpg http://www.instructables.com/files/deriv/FOA/5X90/FALOLDR6/FOA5X90FALOLDR6.SQUARE.jpg http://www.instructables.com/files/deriv/FOA/5X90/FALOLDR6/FOA5X90FALOLDR6.SMALL.jpg freemanmfg Ideal for smaller projects (less than 12" x 12"), this is the easiest process for creating parts, patterns, tools, & molds. We demonstrate creating a silicone rubber mold and then the casting of parts with Repro, epoxy casting resins and polyurethane elastomers.To see other mold making videos see ht...
By: freemanmfg

Continue Reading »]]> Wed, 26 Dec 2007 08:17:56 PST http://www.instructables.com/id/Turn-Your-Lawn-Mower-Into-A-Pirate-Ship/ http://www.instructables.com/files/deriv/FJU/8YBM/HD4VPXXO/FJU8YBMHD4VPXXO.SQUARE2.jpg http://www.instructables.com/files/deriv/FJU/8YBM/HD4VPXXO/FJU8YBMHD4VPXXO.SQUARE.jpg http://www.instructables.com/files/deriv/FJU/8YBM/HD4VPXXO/FJU8YBMHD4VPXXO.SMALL.jpg rustyknuckles Taking the easy road to do anything, is just plain boring to us. If we can create a new challenge and use it as a way to work through some ideas, we are into it! Take for example our concept to build a boat, for use in a quick little promo video with Hellbound Glory. The video is for their upcoming ...
By: rustyknuckles

Continue Reading »]]> Wed, 13 Feb 2013 17:20:22 PST http://www.instructables.com/id/Portal-2-Inspired-Lemon-Grenade-With-Sound/
Portal 2 Inspired Lemon Grenade (With Sound!) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FWJ/XW42/HCJO76RY/FWJXW42HCJO76RY.SQUARE2.jpg http://www.instructables.com/files/deriv/FWJ/XW42/HCJO76RY/FWJXW42HCJO76RY.SQUARE.jpg http://www.instructables.com/files/deriv/FWJ/XW42/HCJO76RY/FWJXW42HCJO76RY.SMALL.jpg Epbot I'm a big Portal fan, and I've been wanting to make my own lemon grenade ever since I spotted this one last year. That one has a soundboard in the display base, but mine makes a "tick-tick-tick BOOM" sound when you pull the pin and press the handle, which is a fun little extra. (Here's a quick video...
By: Epbot

Continue Reading »]]> Wed, 30 Jan 2013 18:51:06 PST http://www.instructables.com/id/How-to-make-a-Terminator-CPU-brain-chip-from-T2/
How to make a Terminator CPU brain chip from T2. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5V/GNWD/HCB8I98S/F5VGNWDHCB8I98S.SQUARE2.jpg http://www.instructables.com/files/deriv/F5V/GNWD/HCB8I98S/F5VGNWDHCB8I98S.SQUARE.jpg http://www.instructables.com/files/deriv/F5V/GNWD/HCB8I98S/F5VGNWDHCB8I98S.SMALL.jpg backwards lamb I was given a glass dome as a present so i wanted to make a little something to go inside it. i started thinking about small props i could make and i came up with the brain chip from terminator 2. So here is my instructables on how to make a T2 brain chip. Research images i did a little google ...
By: backwards lamb

Continue Reading »]]> Thu, 24 Jan 2013 03:39:05 PST http://www.instructables.com/id/How-to-Make-Slime-Ninja-Turtle-Ooze/
How to Make Slime (Ninja Turtle Ooze) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F8H/E6IT/HAQ2ZU69/F8HE6ITHAQ2ZU69.SQUARE2.jpg http://www.instructables.com/files/deriv/F8H/E6IT/HAQ2ZU69/F8HE6ITHAQ2ZU69.SQUARE.jpg http://www.instructables.com/files/deriv/F8H/E6IT/HAQ2ZU69/F8HE6ITHAQ2ZU69.SMALL.jpg The King of Random Watch the Video! Hey, look at this! There's a broken canister of mutant ooze leaking down into the sewers! But don't worry because this sticky slime is non-toxic, and it's so easy to make, a 3 year old can do it! Watch this video to see how! Gather These Materials Inspired by Dr. Anne Helme...
By: The King of Random

Continue Reading »]]> Thu, 17 Jan 2013 09:10:49 PST http://www.instructables.com/id/Working-Sonic-Screwdriver/
Working Sonic Screwdriver - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F2D/EG3P/HBNXWRI7/F2DEG3PHBNXWRI7.SQUARE2.jpg http://www.instructables.com/files/deriv/F2D/EG3P/HBNXWRI7/F2DEG3PHBNXWRI7.SQUARE.jpg http://www.instructables.com/files/deriv/F2D/EG3P/HBNXWRI7/F2DEG3PHBNXWRI7.SMALL.jpg The Props Monster Update June 15th 2013: I am creating a v3.0 and v4.0, simple and complicated respectively. If anyone would like to suggest features for me to explore in these models I am willing to try to incorporate them. Theoretically one or both of these may become a kit version. UPDATE! I have found a simple s...
By: The Props Monster

Continue Reading »]]> Wed, 9 Jan 2013 13:16:10 PST http://www.instructables.com/id/Droide-Gonk/
Droide Gonk de Star Wars - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F8Y/LWLS/GSILY5I0/F8YLWLSGSILY5I0.SQUARE2.jpg http://www.instructables.com/files/deriv/F8Y/LWLS/GSILY5I0/F8YLWLSGSILY5I0.SQUARE.jpg http://www.instructables.com/files/deriv/F8Y/LWLS/GSILY5I0/F8YLWLSGSILY5I0.SMALL.jpg gonzalorojoaguirre Droide Gonk de IKEA a modo de baúl para guardar cosas. cuerpo Utilizaremos dos cajas de IKEA y unos soportes para baldas largos para las paras tambien de IKEA. Luego dos taperware de comida china tubo de electricidad tubo flesible de ventilación de gases,contos de madera, algún taperware pequeño,...
By: gonzalorojoaguirre

Continue Reading »]]> Tue, 13 Sep 2011 11:32:21 PDT http://www.instructables.com/id/EVA-Foam-Armor-Helm/
EVA Foam Armor - Helm - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FO1/8VVZ/GS3BBWTP/FO18VVZGS3BBWTP.SQUARE2.jpg http://www.instructables.com/files/deriv/FO1/8VVZ/GS3BBWTP/FO18VVZGS3BBWTP.SQUARE.jpg http://www.instructables.com/files/deriv/FO1/8VVZ/GS3BBWTP/FO18VVZGS3BBWTP.SMALL.jpg SyntheticChelovjek First off, thanks for checking out my tutorial! I'm always open to suggestions and discussion about my process, so please feel free to comment below. Also feel free to comment if you have questions regarding the process, since it's likely my explanations won't make sense to everybody. I make a lot o...
By: SyntheticChelovjek

Continue Reading »]]> Fri, 16 Sep 2011 23:01:57 PDT http://www.instructables.com/id/Doctor-Who-Sonic-Screwdriver-9th10th-Doctor/
"Doctor Who" Sonic Screwdriver (9th/10th Doctor) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FPV/OMXI/GFRWQDXL/FPVOMXIGFRWQDXL.SQUARE2.jpg http://www.instructables.com/files/deriv/FPV/OMXI/GFRWQDXL/FPVOMXIGFRWQDXL.SQUARE.jpg http://www.instructables.com/files/deriv/FPV/OMXI/GFRWQDXL/FPVOMXIGFRWQDXL.SMALL.jpg groksocket When a friend gave me the idea of going as the Tenth Doctor for Halloween, I was completely sold on it, despite the fact that I had only four days until the big party to pull it together. The costume itself likely doesn't warrant an Instructable as it was mostly thrift shop hunting as opposed to mak...
By: groksocket

Continue Reading »]]> Sun, 31 Oct 2010 19:43:57 PDT http://www.instructables.com/id/Glowing-Gauntlet/
Glowing Gauntlet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FMS/T5WP/HAQ2TT6N/FMST5WPHAQ2TT6N.SQUARE2.jpg http://www.instructables.com/files/deriv/FMS/T5WP/HAQ2TT6N/FMST5WPHAQ2TT6N.SQUARE.jpg http://www.instructables.com/files/deriv/FMS/T5WP/HAQ2TT6N/FMST5WPHAQ2TT6N.SMALL.jpg ehudwill I have always liked armor and lights. In this instructable I decided to combine the two. This one was fairly cheap to do and I am very happy with it. Tools/Materials Some of my materials came from other projects, or from items that were no longer of use. Materials $7 to $10 - Scrap Leather 10 oz...
By: ehudwill

Continue Reading »]]> Wed, 26 Dec 2012 16:36:47 PST http://www.instructables.com/id/Mold-Making---Mass-Casting-Complex-Parts-with-a-p/ http://www.instructables.com/files/deriv/FC5/DJE6/FALOLDR3/FC5DJE6FALOLDR3.SQUARE2.jpg http://www.instructables.com/files/deriv/FC5/DJE6/FALOLDR3/FC5DJE6FALOLDR3.SQUARE.jpg http://www.instructables.com/files/deriv/FC5/DJE6/FALOLDR3/FC5DJE6FALOLDR3.SMALL.jpg freemanmfg When mass casting a part without a flat side, you must create a two-part mold. We create a two-part silicone rubber mold with a clean parting line and then cast the part with Repro.To see other mold making videos see http://www.freemansupply.com/moldmaking.htm
By: freemanmfg

Continue Reading »]]> Wed, 26 Dec 2007 08:21:47 PST http://www.instructables.com/id/How-to-make-a-cosplay-helmet/
How to make a cosplay helmet! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F2Y/YKH0/H4VQSRI0/F2YYKH0H4VQSRI0.SQUARE2.jpg http://www.instructables.com/files/deriv/F2Y/YKH0/H4VQSRI0/F2YYKH0H4VQSRI0.SQUARE.jpg http://www.instructables.com/files/deriv/F2Y/YKH0/H4VQSRI0/F2YYKH0H4VQSRI0.SMALL.jpg FabiojapaXD Always wanted to make a helmet from Halo, Daft Punk, Gears of Wars, or any other iconic character that you like a lot? This instructable is for you! (And it works for armor too!)  Obs: This is my first instructable, and if there is any grammar mistake, sorry, english isn't my first language! and th...
By: FabiojapaXD

Continue Reading »]]> Sat, 21 Jul 2012 17:19:45 PDT http://www.instructables.com/id/Doctor-Who-Diary/
Doctor Who Diary - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FOG/C1SQ/HAOPY9K7/FOGC1SQHAOPY9K7.SQUARE2.jpg http://www.instructables.com/files/deriv/FOG/C1SQ/HAOPY9K7/FOGC1SQHAOPY9K7.SQUARE.jpg http://www.instructables.com/files/deriv/FOG/C1SQ/HAOPY9K7/FOGC1SQHAOPY9K7.SMALL.jpg ChrysN Here is a great gift for the Doctor Who fan in your life, a Doctor Who Tardis Diary. If you've seen the Doctor Who episodes you are probably familiar with River Song's diary.  It as given to her by the Doctor to keep track of their meetings and adventures together (spoilers!) and resembles the Tardi...
By: ChrysN

Continue Reading »]]> Sun, 16 Dec 2012 11:49:35 PST http://www.instructables.com/id/How-to-build-iron-mans-arc-reactor/
How to build iron mans arc reactor. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGF/BHLS/H4AGK1BO/FGFBHLSH4AGK1BO.SQUARE2.jpg http://www.instructables.com/files/deriv/FGF/BHLS/H4AGK1BO/FGFBHLSH4AGK1BO.SQUARE.jpg http://www.instructables.com/files/deriv/FGF/BHLS/H4AGK1BO/FGFBHLSH4AGK1BO.SMALL.jpg backwards lamb i have always loved iron man and when the first film came out i saw some "collectible props of the arc reactor" floating around on the web. they were great and i wanted to see if i could make one. i had access to a laser cutter so i gave it a try. this is how i made mine. its maybe not screen perf...
By: backwards lamb

Continue Reading »]]> Wed, 11 Jul 2012 13:09:54 PDT http://www.instructables.com/id/Mechanical-Hand-2/
Mechanical Hand - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFI/YEGY/HA4M852I/FFIYEGYHA4M852I.SQUARE2.jpg http://www.instructables.com/files/deriv/FFI/YEGY/HA4M852I/FFIYEGYHA4M852I.SQUARE.jpg http://www.instructables.com/files/deriv/FFI/YEGY/HA4M852I/FFIYEGYHA4M852I.SMALL.jpg Manick Yoj My most successful project to date. And I have learned that it is fun to have another hand! Not to mention that its great in costumes and gives a great deal more mileage than any other costume props I have made. In total I believe this project took less than 20 hours (once parts were assembled) and ...
By: Manick Yoj

Continue Reading »]]> Tue, 11 Dec 2012 22:36:29 PST http://www.instructables.com/id/Make-an-Ancient-Looking-Map-of-Neverland/
Make an Ancient-Looking Map of Neverland - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FDD/CBPK/GZ0BWNGQ/FDDCBPKGZ0BWNGQ.SQUARE2.jpg http://www.instructables.com/files/deriv/FDD/CBPK/GZ0BWNGQ/FDDCBPKGZ0BWNGQ.SQUARE.jpg http://www.instructables.com/files/deriv/FDD/CBPK/GZ0BWNGQ/FDDCBPKGZ0BWNGQ.SMALL.jpg Greatfun4kids Pirate Parties are fun, there's no doubt about it. But if you want to shake things up a little and make your party girl-friendly too, a Peter Pan Party keeps everybody happy. Here's how to make a simple-but-effective Old Map of Neverland... it costs next-to-nothing and looks effective as part of the...
By: Greatfun4kids

Continue Reading »]]> Thu, 1 Mar 2012 14:09:12 PST http://www.instructables.com/id/Daft-Punk-Thomas-Bangalter-Helmet/
Daft Punk Thomas Bangalter Helmet! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4C/6DC9/GZHJZBMX/F4C6DC9GZHJZBMX.SQUARE2.jpg http://www.instructables.com/files/deriv/F4C/6DC9/GZHJZBMX/F4C6DC9GZHJZBMX.SQUARE.jpg http://www.instructables.com/files/deriv/F4C/6DC9/GZHJZBMX/F4C6DC9GZHJZBMX.SMALL.jpg FennecCooper Having the Guy Manuel helmet on hand, and looking at Volpin's amazing work, I began working on a Thomas Bangalter Helmet, why not have them both? ^-^ If you've seen my previous instructables, you will understand the process much easier, however, I encourage you to have a read at this instructable! ...
By: FennecCooper

Continue Reading »]]> Wed, 7 Mar 2012 10:48:50 PST http://www.instructables.com/id/How-to-sculpt-Skyrim-logo-Skyrim-custom-laptop/
How to sculpt Skyrim logo -Skyrim custom laptop - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FWU/UYBS/H1KHAWRG/FWUUYBSH1KHAWRG.SQUARE2.jpg http://www.instructables.com/files/deriv/FWU/UYBS/H1KHAWRG/FWUUYBSH1KHAWRG.SQUARE.jpg http://www.instructables.com/files/deriv/FWU/UYBS/H1KHAWRG/FWUUYBSH1KHAWRG.SMALL.jpg ~Mad Hatter This Instructable will show you how to sculpt Skyrim logo/Akatosh Sigil  to customize your laptop in about 2 hours~ ~An entry in the Make it real Challenge~ Tools and materials: Tools and materials: -white & metallic grey Fimo clay  (or any other brand of polymer clay) -black, grey, and white c...
By: ~Mad Hatter

Continue Reading »]]> Sun, 25 Mar 2012 10:03:12 PDT