Instructables: exploring - steampunk http://www.instructables.com Sun, 5 Jul 2015 18:07:11 PDT BLOX v1.01 A silly and simply one-step instructable about how to make a key ring from a computer's old memory module (or the first of a "just one step instructables" contest too!) http://www.instructables.com/id/A-silly-and-simply-one-step-instructable-about-how/
A silly and simply one-step instructable about how to make a key ring from a computer's old memory module (or the first of a "just one step instructables" contest too!) - More DIY How To Projects]]> http://cdn.instructables.com/FB9/57PO/IBM262XE/FB957POIBM262XE.SQUARE2.jpg http://cdn.instructables.com/FB9/57PO/IBM262XE/FB957POIBM262XE.SQUARE.jpg http://cdn.instructables.com/FB9/57PO/IBM262XE/FB957POIBM262XE.SMALL.jpg newbeatle in this short instructable i will show how to make a simple but geekie keyring from a memory from a 90's (or older? ) personal computer , actually is the one that i use the only parts you need is:- some keys to put together- a memory that can be any kind , also from a laptop with a little hole to pa...
By: newbeatle

Continue Reading »]]>
Thu, 2 Jul 2015 22:15:00 PDT
Hanging flayers http://www.instructables.com/id/Hanging-flayers/
Hanging flayers - More DIY How To Projects]]> http://cdn.instructables.com/F9C/DCIS/IBAMI0WJ/F9CDCISIBAMI0WJ.SQUARE2.jpg http://cdn.instructables.com/F9C/DCIS/IBAMI0WJ/F9CDCISIBAMI0WJ.SQUARE.jpg http://cdn.instructables.com/F9C/DCIS/IBAMI0WJ/F9CDCISIBAMI0WJ.SMALL.jpg deepak_e4d Maker : DeepakLocation : Banjaraplya E4D MakerspaceI did this hanging flayers in Banjaraplya E4D Makerspace for build night with strawbees.Material: 44 strawbees modle 660(strawbees) 154(2-straw bees) StrawsToolsNo tool Put 44 strawbees modles Put the 44 (5) strawbees as sh...
By: deepak_e4d

Continue Reading »]]>
Wed, 24 Jun 2015 07:30:27 PDT
How to Make a Fake Dagger http://www.instructables.com/id/How-to-Make-a-Fake-Dagger/
How to Make a Fake Dagger - More DIY How To Projects]]> http://cdn.instructables.com/FEU/V8U9/IAWD9F37/FEUV8U9IAWD9F37.SQUARE2.jpg http://cdn.instructables.com/FEU/V8U9/IAWD9F37/FEUV8U9IAWD9F37.SQUARE.jpg http://cdn.instructables.com/FEU/V8U9/IAWD9F37/FEUV8U9IAWD9F37.SMALL.jpg insert username The tools and materials you will need are: Scissors An old or broken CD A small screw or button Paint A drill or a hammer and nail Glue for reinforcement (optional) Varnish or clear nail polish (optional) Shaping Mark approximately where you want to cut out the shape of the dagger and ho...
By: insert username

Continue Reading »]]>
Sun, 14 Jun 2015 09:46:25 PDT
My Every Day Altoids Tin http://www.instructables.com/id/My-Every-Day-Altoids-Tin/
My Every Day Altoids Tin - More DIY How To Projects]]> http://cdn.instructables.com/F8P/YQ1M/IAUWWPMH/F8PYQ1MIAUWWPMH.SQUARE2.jpg http://cdn.instructables.com/F8P/YQ1M/IAUWWPMH/F8PYQ1MIAUWWPMH.SQUARE.jpg http://cdn.instructables.com/F8P/YQ1M/IAUWWPMH/F8PYQ1MIAUWWPMH.SMALL.jpg Ace_of_spades_21 This is just my everyday pocket altoid survival kit. Not really a survival kit, just trying to see if I can make a good instructable,really. Contents Here's what I have:-Small Columbia multi tool -paper for writing on (what else would you do with paper)-small pencil-$1 in quarters (who knows wha...
By: Ace_of_spades_21

Continue Reading »]]>
Sat, 13 Jun 2015 20:26:24 PDT
SteamSaber http://www.instructables.com/id/SteamSaber/
SteamSaber - More DIY How To Projects]]> http://cdn.instructables.com/FDJ/S3AT/IATHMR0I/FDJS3ATIATHMR0I.SQUARE2.jpg http://cdn.instructables.com/FDJ/S3AT/IATHMR0I/FDJS3ATIATHMR0I.SQUARE.jpg http://cdn.instructables.com/FDJ/S3AT/IATHMR0I/FDJS3ATIATHMR0I.SMALL.jpg spacepirate04 Steampunk light saber made from mostly found bits.The handle is made a from a table leg I bought for a nickle at salvation army store cut in half wrapped in scrap fake leather.Made with miscellaneous pieces that i have either found or collected the only piece that was bought was the handle peices us...
By: spacepirate04

Continue Reading »]]>
Sat, 13 Jun 2015 15:30:50 PDT
Hats http://www.instructables.com/id/Hats/ http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SQUARE2.jpg http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SQUARE.jpg http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SMALL.jpg KarenW12 Totoro Hat Hex Hats Princess Hat on the Cheap How to make a Cadet-style cap Checkpoint Charlie Hat Make a Newsie Hat How to Make a Top Hat (on the cheap) Leather Steampunk Top Hat
By: KarenW12

Continue Reading »]]>
Sat, 23 May 2015 23:20:01 PDT
Making Steam Punk parts in Blender for ART, or 3D Printing http://www.instructables.com/id/Making-Steam-Punk-parts-in-Blender-for-ART-or-3D-P/
Making Steam Punk parts in Blender for ART, or 3D Printing - More DIY How To Projects]]> http://cdn.instructables.com/FR1/L8UH/I9NE4HJS/FR1L8UHI9NE4HJS.SQUARE2.jpg http://cdn.instructables.com/FR1/L8UH/I9NE4HJS/FR1L8UHI9NE4HJS.SQUARE.jpg http://cdn.instructables.com/FR1/L8UH/I9NE4HJS/FR1L8UHI9NE4HJS.SMALL.jpg Londonleistone OK I like making steampunk stuff in 3D then printing them out for cool parts later. In this tutorial I am going to cover how to make simple gears and propeller blades to make steampunk decoration for one of my hats.I will show how to make the model for this idea. NOTE: I'm only going to go in to mak...
By: Londonleistone

Continue Reading »]]>
Wed, 13 May 2015 18:22:28 PDT
Steam punk to do http://www.instructables.com/id/Steam-punk-to-do/ http://cdn.instructables.com/FNO/27OT/I8PQUEA5/FNO27OTI8PQUEA5.SQUARE2.jpg http://cdn.instructables.com/FNO/27OT/I8PQUEA5/FNO27OTI8PQUEA5.SQUARE.jpg http://cdn.instructables.com/FNO/27OT/I8PQUEA5/FNO27OTI8PQUEA5.SMALL.jpg tarin2 Things that would be awesome to do Steampunk goggles Building a Drinkbot: The Elixirator Steampunk goggles "N-Axis" High Voltage Ignited Plasma Bulb The Liquid Blade of the Three Deserts The SteamRoller Riding Contraption Radiometrical Mood Analyzer Steampunked Aethervo...
By: tarin2

Continue Reading »]]>
Mon, 20 Apr 2015 06:12:49 PDT
Nautilus http://www.instructables.com/id/Nautilus-1/
Nautilus - More DIY How To Projects]]> http://cdn.instructables.com/FIH/67LA/I8LGQ035/FIH67LAI8LGQ035.SQUARE2.jpg http://cdn.instructables.com/FIH/67LA/I8LGQ035/FIH67LAI8LGQ035.SQUARE.jpg http://cdn.instructables.com/FIH/67LA/I8LGQ035/FIH67LAI8LGQ035.SMALL.jpg nemo13 Personal view of the Nautilus the ideas, the 1st work First step of Two: the idea and the work. The idea was to make a Steampunk organic Nautilus. I thought a Hammerhead Shark would be a good shape design for it.Using a 123dMake model, I made the shape using styrene, covering it with tape then w...
By: nemo13

Continue Reading »]]>
Sat, 18 Apr 2015 10:05:24 PDT
LED Steampunk lamp using old light bulbs http://www.instructables.com/id/LED-Steampunk-lamp-using-old-light-bulbs/
LED Steampunk lamp using old light bulbs - More DIY How To Projects]]> http://cdn.instructables.com/FUJ/3HO8/IAQMCPZL/FUJ3HO8IAQMCPZL.SQUARE2.jpg http://cdn.instructables.com/FUJ/3HO8/IAQMCPZL/FUJ3HO8IAQMCPZL.SQUARE.jpg http://cdn.instructables.com/FUJ/3HO8/IAQMCPZL/FUJ3HO8IAQMCPZL.SMALL.jpg Electrospark In this instructable I am going to show you how to make an LED Steampunk lamp using old light bulbs.I wanted to make a Steampunk lamp out of old light bulbs for a long time but I was always busy with other projects. Recently I finally got to it by making an instructable on how to open a light bulb w...
By: Electrospark

Continue Reading »]]>
Tue, 14 Apr 2015 18:20:22 PDT
Floralia Insektans - A Steampunk Terrarium / Plant Observer http://www.instructables.com/id/Floralia-Insektans-A-Steampunk-Terrarium-Plant-Obs/
Floralia Insektans - A Steampunk Terrarium / Plant Observer - More DIY How To Projects]]> http://cdn.instructables.com/FNV/BEPX/I8CVYP8Z/FNVBEPXI8CVYP8Z.SQUARE2.jpg http://cdn.instructables.com/FNV/BEPX/I8CVYP8Z/FNVBEPXI8CVYP8Z.SQUARE.jpg http://cdn.instructables.com/FNV/BEPX/I8CVYP8Z/FNVBEPXI8CVYP8Z.SMALL.jpg Leander Lavendel Hi there,today i would like to show you a Steampunk Terrarium / Plant Observer. Inside is sitting a " Venus Fly Trap "The Glastank is an old Lightbulb 2000 Watt and the small Watertank was a Neonbulb. A Pump pours on push of a Button automatically the System. Nightlight is going on by a Sensor. Wh...
By: Leander Lavendel

Continue Reading »]]>
Sun, 12 Apr 2015 02:27:46 PDT
steampunk submarine egg http://www.instructables.com/id/steampunk-submarine-egg/
steampunk submarine egg - More DIY How To Projects]]> http://cdn.instructables.com/FVK/RH89/I8BGFQJD/FVKRH89I8BGFQJD.SQUARE2.jpg http://cdn.instructables.com/FVK/RH89/I8BGFQJD/FVKRH89I8BGFQJD.SQUARE.jpg http://cdn.instructables.com/FVK/RH89/I8BGFQJD/FVKRH89I8BGFQJD.SMALL.jpg mahima16 This is a steampunk version of a submarine using egg shell in which you can secretly store tiny objects!! Gathering the materials an egga pair of scissorsacrylic colours (metallic shades like silver,copper etc)strawstissue papersgluemount board (or card board) 6cm X 6cma sheet of papera rubberba...
By: mahima16

Continue Reading »]]>
Fri, 10 Apr 2015 05:53:42 PDT
Steampunk raygun made from found objects http://www.instructables.com/id/Steampunk-raygun-made-from-found-objects/
Steampunk raygun made from found objects - More DIY How To Projects]]> http://cdn.instructables.com/FHZ/XE78/I86UE1WU/FHZXE78I86UE1WU.SQUARE2.jpg http://cdn.instructables.com/FHZ/XE78/I86UE1WU/FHZXE78I86UE1WU.SQUARE.jpg http://cdn.instructables.com/FHZ/XE78/I86UE1WU/FHZXE78I86UE1WU.SMALL.jpg instructor_gadget This Raygun was made using objects found in my bits and bobs bin. Although I made use of a lathe, sandblasting cabinet and drill press during construction you can make something similar using basic workshop tools. Let's take a look... Design. I made a few sketches to keep me focused on what i had...
By: instructor_gadget

Continue Reading »]]>
Tue, 7 Apr 2015 08:26:36 PDT
The Victorian Sound-Tube...A Steampunk Mp3 Player http://www.instructables.com/id/The-Victorian-Sound-TubeA-Steampunk-Mp3-Player/
The Victorian Sound-Tube...A Steampunk Mp3 Player - More DIY How To Projects]]> http://cdn.instructables.com/F1B/WXG9/I7MX2ZHN/F1BWXG9I7MX2ZHN.SQUARE2.jpg http://cdn.instructables.com/F1B/WXG9/I7MX2ZHN/F1BWXG9I7MX2ZHN.SQUARE.jpg http://cdn.instructables.com/F1B/WXG9/I7MX2ZHN/F1BWXG9I7MX2ZHN.SMALL.jpg Leander Lavendel The Victorian Sound-Tube is a Steampunk Mp3 Player with motorized holding Arms and Sound to Light Control. The Tube lies on a Holder and two Arms of Brass are holding the Tube from both Sides. Put a Switch and the Arms separate the Tube. Lets go.. First we need a Musicman Ma Mp3 Player. On Ebay f...
By: Leander Lavendel

Continue Reading »]]>
Tue, 24 Mar 2015 07:10:11 PDT
Steampunk VFD Clock http://www.instructables.com/id/Steampunk-VFD-Clock/
Steampunk VFD Clock - More DIY How To Projects]]> http://cdn.instructables.com/FPR/OCU5/I7KB7UVH/FPROCU5I7KB7UVH.SQUARE2.jpg http://cdn.instructables.com/FPR/OCU5/I7KB7UVH/FPROCU5I7KB7UVH.SQUARE.jpg http://cdn.instructables.com/FPR/OCU5/I7KB7UVH/FPROCU5I7KB7UVH.SMALL.jpg Leander Lavendel Hi,here is a Steampunk Clock with VFD Tubes. I used a DIY Kit from Günther Rother, Germany. Many Greets from here to Him ;) The Beginning We need:Copper Tubes 60mm and 8mmDivides from Brass LampsA VFD-Clock KitThin CablesBeach WoodWood ColorSome Screws2 Brassballs 12mmSolder SetHot GlueRound Boar...
By: Leander Lavendel

Continue Reading »]]>
Mon, 23 Mar 2015 02:54:39 PDT
Aetherias Secret - A Steampunk Safe with Nixie Display http://www.instructables.com/id/Aetherias-Secret/
Aetherias Secret - A Steampunk Safe with Nixie Display - More DIY How To Projects]]> http://cdn.instructables.com/FTD/DF8W/I7IVOVHP/FTDDF8WI7IVOVHP.SQUARE2.jpg http://cdn.instructables.com/FTD/DF8W/I7IVOVHP/FTDDF8WI7IVOVHP.SQUARE.jpg http://cdn.instructables.com/FTD/DF8W/I7IVOVHP/FTDDF8WI7IVOVHP.SMALL.jpg Leander Lavendel " Aetherias Secret " - A Steampunk Safe, Code locked, with Neonballs and Nixie Display. It opens when the Code is right and turns around. With Handclapping Sensor to start the Energy !My Thoughts were : A crate open by pushing a Button..........which thereby came out see it now. OK, creating the C...
By: Leander Lavendel

Continue Reading »]]>
Sat, 21 Mar 2015 16:25:56 PDT
Aetheria Circumducitur- A Steampunk High Voltage Lamp http://www.instructables.com/id/Aetheria-Circumducitur-A-Steampunk-High-Voltage-La/
Aetheria Circumducitur- A Steampunk High Voltage Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FJF/WRZ8/I7IVNWYJ/FJFWRZ8I7IVNWYJ.SQUARE2.jpg http://cdn.instructables.com/FJF/WRZ8/I7IVNWYJ/FJFWRZ8I7IVNWYJ.SQUARE.jpg http://cdn.instructables.com/FJF/WRZ8/I7IVNWYJ/FJFWRZ8I7IVNWYJ.SMALL.jpg Leander Lavendel Hi,this is my first Instructable here on this Site. I hope you like my Constructions and Objects. Now, here is my " Aetheria Circumducitur". A high Voltage Lamp with a " Neon Geissler Tube ". Driven with a Tesla Generator and 5000 Volt. A rotating Cage turns around the Geissler Tube. The Beginning...
By: Leander Lavendel

Continue Reading »]]>
Sat, 21 Mar 2015 14:46:36 PDT
PUNK PENDANT http://www.instructables.com/id/PUNK-PENDANT/
PUNK PENDANT - More DIY How To Projects]]> http://cdn.instructables.com/FND/XN2M/I74L7KRE/FNDXN2MI74L7KRE.SQUARE2.jpg http://cdn.instructables.com/FND/XN2M/I74L7KRE/FNDXN2MI74L7KRE.SQUARE.jpg http://cdn.instructables.com/FND/XN2M/I74L7KRE/FNDXN2MI74L7KRE.SMALL.jpg rohan paul 1. This is a punk pendant i made from the scrap normally available at home.2. If you have any doubts, feel free to comment.Hope you like it. :) MATERIALS YOU'LL NEED 1. An empty battery.2. Some nuts.(small)3.Glue4. A spring or copper wire.5. A wine cork.6. Scissors.7.Add on scrap parts like( in m...
By: rohan paul

Continue Reading »]]>
Wed, 11 Mar 2015 04:27:22 PDT
Dr. Steam’s STEAMPUNK Clockwork Machine http://www.instructables.com/id/Dr-Steams-STEAMPUNK-Clockwork-Machine/
Dr. Steam’s STEAMPUNK Clockwork Machine - More DIY How To Projects]]> http://cdn.instructables.com/FQF/KQGV/I6HSBF2K/FQFKQGVI6HSBF2K.SQUARE2.jpg http://cdn.instructables.com/FQF/KQGV/I6HSBF2K/FQFKQGVI6HSBF2K.SQUARE.jpg http://cdn.instructables.com/FQF/KQGV/I6HSBF2K/FQFKQGVI6HSBF2K.SMALL.jpg thechocolatist Dear Steampunkers around the GlobeThis time I would like to give you some inspiration what you can do with not much money and a few old metal parts from the junk yard.For me STEAMPUNK means to build fantastic machines and gadgets for almost no money and out from the things which our modern society t...
By: thechocolatist

Continue Reading »]]>
Tue, 24 Feb 2015 03:39:19 PST
Bird head http://www.instructables.com/id/Bird-head/
Bird head - More DIY How To Projects]]> http://cdn.instructables.com/FIY/AIAB/I6EXLURV/FIYAIABI6EXLURV.SQUARE2.jpg http://cdn.instructables.com/FIY/AIAB/I6EXLURV/FIYAIABI6EXLURV.SQUARE.jpg http://cdn.instructables.com/FIY/AIAB/I6EXLURV/FIYAIABI6EXLURV.SMALL.jpg Natyguzman9 Hi everyone! Today I will show you how I made this bird head! As you see, it looks like a Steam punk mask. This head is part of a costume that I made with some friends in the Universidad Nacional de Colombia. Hope you like it! show me your results :) Step 1: Building structure Here, buy a helmet ...
By: Natyguzman9

Continue Reading »]]>
Sun, 22 Feb 2015 16:22:10 PST
Mini prototype suspension http://www.instructables.com/id/Mini-prototype-suspension-1/
Mini prototype suspension - More DIY How To Projects]]> http://cdn.instructables.com/FWW/R796/I5WCVXI9/FWWR796I5WCVXI9.SQUARE2.jpg http://cdn.instructables.com/FWW/R796/I5WCVXI9/FWWR796I5WCVXI9.SQUARE.jpg http://cdn.instructables.com/FWW/R796/I5WCVXI9/FWWR796I5WCVXI9.SMALL.jpg Skullcustoms Made from ball pen refill
By: Skullcustoms

Continue Reading »]]>
Mon, 9 Feb 2015 00:08:01 PST
Steampunk lamp. http://www.instructables.com/id/Steampunk-lamp-4/
Steampunk lamp. - More DIY How To Projects]]> http://cdn.instructables.com/F5I/6QDV/I5GN65JD/F5I6QDVI5GN65JD.SQUARE2.jpg http://cdn.instructables.com/F5I/6QDV/I5GN65JD/F5I6QDVI5GN65JD.SQUARE.jpg http://cdn.instructables.com/F5I/6QDV/I5GN65JD/F5I6QDVI5GN65JD.SMALL.jpg Sleutel13 So this weekend i made this lamp. It is replacing an ikea reading light. It is made from copper,brass an old 40watt Philips light buld and a 1watt led and some scrap wood. The base. For this you need:2x 35cm long woodwood glue3x dowels6mm drillAnd a hammer just to make sure its all nice and tigh...
By: Sleutel13

Continue Reading »]]>
Thu, 29 Jan 2015 08:05:34 PST
Dieselpunk Goggles XD-2 http://www.instructables.com/id/Dieselpunk-Goggles-XD-2/
Dieselpunk Goggles XD-2 - More DIY How To Projects]]> http://cdn.instructables.com/FPE/EDJN/I5AZICLR/FPEEDJNI5AZICLR.SQUARE2.jpg http://cdn.instructables.com/FPE/EDJN/I5AZICLR/FPEEDJNI5AZICLR.SQUARE.jpg http://cdn.instructables.com/FPE/EDJN/I5AZICLR/FPEEDJNI5AZICLR.SMALL.jpg Dreamchronic Hello to all crafters,recently i've finished these very very simple dieselpunk goggles, made of just a few things.Time to make them could be like 20 minutes, maybe 30.And so here's a quick tutorial...What you will need:a piece of leather or an eco-leatherpapertube from a vacuum cleanersilver paintco...
By: Dreamchronic

Continue Reading »]]>
Sat, 24 Jan 2015 04:41:07 PST
Plasma Gum http://www.instructables.com/id/Plasma-Gum/
Plasma Gum - More DIY How To Projects]]> http://cdn.instructables.com/FZZ/NBX5/I58IC9GM/FZZNBX5I58IC9GM.SQUARE2.jpg http://cdn.instructables.com/FZZ/NBX5/I58IC9GM/FZZNBX5I58IC9GM.SQUARE.jpg http://cdn.instructables.com/FZZ/NBX5/I58IC9GM/FZZNBX5I58IC9GM.SMALL.jpg nate71173 Here for your enjoyment is a hack/make/assemblage item. I've always loved plasma globes ever since first spotting one as a wee lad (a million years ago) in Radioshack. Now that they're no longer $100 in eighties money, and are a mere $20 on sale, they're much easier to attain. Being more practically...
By: nate71173

Continue Reading »]]>
Thu, 22 Jan 2015 22:21:53 PST
Sound-reactive LED Tiny Top Hat http://www.instructables.com/id/Sound-reactive-LED-Tiny-Top-Hat/
Sound-reactive LED Tiny Top Hat - More DIY How To Projects]]> http://cdn.instructables.com/FOL/TR4O/I55MWVBQ/FOLTR4OI55MWVBQ.SQUARE2.jpg http://cdn.instructables.com/FOL/TR4O/I55MWVBQ/FOLTR4OI55MWVBQ.SQUARE.jpg http://cdn.instructables.com/FOL/TR4O/I55MWVBQ/FOLTR4OI55MWVBQ.SMALL.jpg ModMischief This tiny top hat is covered in LED stickers that fade on and off and light up in reaction to noise. The electronics are all done with materials from YuKonstruct's Chibitronics Build Night and the hat was made following instructions from Offbeat Bride.While the hat was made for an adult's steampunk ...
By: ModMischief

Continue Reading »]]>
Thu, 22 Jan 2015 14:11:37 PST
MakeyMakey Record Maze Game http://www.instructables.com/id/MakeyMakey-Record-Maze-Game/
MakeyMakey Record Maze Game - More DIY How To Projects]]> http://cdn.instructables.com/FY8/C5DH/I4PHKAFO/FY8C5DHI4PHKAFO.SQUARE2.jpg http://cdn.instructables.com/FY8/C5DH/I4PHKAFO/FY8C5DHI4PHKAFO.SQUARE.jpg http://cdn.instructables.com/FY8/C5DH/I4PHKAFO/FY8C5DHI4PHKAFO.SMALL.jpg TheEliza This Instructable will show you how to build a fun game using a record player, some copper tape and a MakeyMakey kit. Follow the copper maze on the record as the record turns. If the music stops, go back to the beginning! This project was created at the Yukonstruct MakeyMakey Build Night. Start Wi...
By: TheEliza

Continue Reading »]]>
Mon, 19 Jan 2015 21:46:55 PST
Steampunk http://www.instructables.com/id/Steampunk-2010-2011-2012-2013-2014-2015-2016-2017/ http://cdn.instructables.com/F7P/8GC2/I50XJEL2/F7P8GC2I50XJEL2.SQUARE2.jpg http://cdn.instructables.com/F7P/8GC2/I50XJEL2/F7P8GC2I50XJEL2.SQUARE.jpg http://cdn.instructables.com/F7P/8GC2/I50XJEL2/F7P8GC2I50XJEL2.SMALL.jpg maKACS Best of Steampunk. Desktop Terrarium with Night Light I want this small green piece of nature on my desk. The STEAMPUNK Biosphere Model 1876 "The Steampunk Garden" in a bulb Another candidate of small green piece of nature to my desk. 4Gb Steampunk USB flash drive Steampunked Magic E...
By: maKACS

Continue Reading »]]>
Mon, 19 Jan 2015 15:09:01 PST
Huge wood nixie clock http://www.instructables.com/id/Huge-wood-nixie-clock/
Huge wood nixie clock - More DIY How To Projects]]> http://cdn.instructables.com/FRL/BWAH/I58I9YHT/FRLBWAHI58I9YHT.SQUARE2.jpg http://cdn.instructables.com/FRL/BWAH/I58I9YHT/FRLBWAHI58I9YHT.SQUARE.jpg http://cdn.instructables.com/FRL/BWAH/I58I9YHT/FRLBWAHI58I9YHT.SMALL.jpg andrea biffi As many of you have already understood, I'm a bit nixie-addicted.This is my third nixie clock, and as for previous ones its making process has been fully documented into an instructable, so that everybody with patience and a few tools can build it.WARNING: the circuit raises the voltage to deadly 30...
By: andrea biffi

Continue Reading »]]>
Mon, 19 Jan 2015 13:52:58 PST
steampunk radio tube http://www.instructables.com/id/steampunk-radio-tube/
steampunk radio tube - More DIY How To Projects]]> http://cdn.instructables.com/FPJ/EC3J/I50XEI3S/FPJEC3JI50XEI3S.SQUARE2.jpg http://cdn.instructables.com/FPJ/EC3J/I50XEI3S/FPJEC3JI50XEI3S.SQUARE.jpg http://cdn.instructables.com/FPJ/EC3J/I50XEI3S/FPJEC3JI50XEI3S.SMALL.jpg Sleutel13 small and simple guide for steampunking your radio tube. tools needed and safety. safety:safety glasses gloves when working with glass you cant do without.tools:dremel with cutting discplastic bagsuper gluehot glue small hammer.pliers.soldering iron materialssmall radio tube. i used a Philips 1€...
By: Sleutel13

Continue Reading »]]>
Mon, 19 Jan 2015 06:40:23 PST
Pesky Fairy Catching Kit http://www.instructables.com/id/Pesky-Fairy-Catching-Kit/
Pesky Fairy Catching Kit - More DIY How To Projects]]> http://cdn.instructables.com/F2K/5J6P/I4TRSV61/F2K5J6PI4TRSV61.SQUARE2.jpg http://cdn.instructables.com/F2K/5J6P/I4TRSV61/F2K5J6PI4TRSV61.SQUARE.jpg http://cdn.instructables.com/F2K/5J6P/I4TRSV61/F2K5J6PI4TRSV61.SMALL.jpg MayB Are you tired of those pesky fae flitting about your garden knocking things over and hiding your car keys? Ever wanted to catch one and give it a good telling off? Well now you can! Protect your stuff by following these simple steps to put together your very own fairy catching kit. Find a Jar You...
By: MayB

Continue Reading »]]>
Mon, 12 Jan 2015 06:44:38 PST
The STEAMPUNK Biosphere Model 1876 http://www.instructables.com/id/The-STEAMPUNK-Biosphere-Model-1876/
The STEAMPUNK Biosphere Model 1876 - More DIY How To Projects]]> http://cdn.instructables.com/FUK/AVNP/I4IXGK9E/FUKAVNPI4IXGK9E.SQUARE2.jpg http://cdn.instructables.com/FUK/AVNP/I4IXGK9E/FUKAVNPI4IXGK9E.SQUARE.jpg http://cdn.instructables.com/FUK/AVNP/I4IXGK9E/FUKAVNPI4IXGK9E.SMALL.jpg thechocolatist Dear Makers out thereHere is the proof, that Steampunkers are not only happy with copper and brass! We have a "Green Thumb" too - but some brass, glass, wood and steel has to be in for sure!The "Biosphere Model 1876" is a unique wonder of nature and hosts a living small beech tree. This small oeko s...
By: thechocolatist

Continue Reading »]]>
Tue, 6 Jan 2015 13:25:47 PST
A desk lamp http://www.instructables.com/id/A-desk-lamp/
A desk lamp - More DIY How To Projects]]> http://cdn.instructables.com/F13/QXKC/I4E6BLKM/F13QXKCI4E6BLKM.SQUARE2.jpg http://cdn.instructables.com/F13/QXKC/I4E6BLKM/F13QXKCI4E6BLKM.SQUARE.jpg http://cdn.instructables.com/F13/QXKC/I4E6BLKM/F13QXKCI4E6BLKM.SMALL.jpg Horatius.Steam A couple of mont ago I was able to get my hands on two of this very nice bulbs.I like to operate them with lower voltage because on normal 230V the bulbs are too bright.Operating these bulb on lower voltage will extend the lifetime enormous. First choice... The first choice was to connect the bul...
By: Horatius.Steam

Continue Reading »]]>
Sat, 3 Jan 2015 03:03:37 PST
Steampunk'd Goggles http://www.instructables.com/id/Steampunkd-Goggles/
Steampunk'd Goggles - More DIY How To Projects]]> http://cdn.instructables.com/F14/0JNP/I48CXSLR/F140JNPI48CXSLR.SQUARE2.jpg http://cdn.instructables.com/F14/0JNP/I48CXSLR/F140JNPI48CXSLR.SQUARE.jpg http://cdn.instructables.com/F14/0JNP/I48CXSLR/F140JNPI48CXSLR.SMALL.jpg PicoPixie The finished goggles! Black cybergoth goggles for the punkin' I had these black plastic goggles I wanted to punk. These can be purchased for Materials Selection of small headed brushes.Some acrylic craft paint in a suitable metallic - I went with a bronze which I got from Hobbycraft for 2.50...
By: PicoPixie

Continue Reading »]]>
Sat, 3 Jan 2015 00:05:12 PST
The Airship Captain MK-I(yet another steampunk keyboard) http://www.instructables.com/id/The-Airship-Captain-MK-Iyet-another-steampunk-keyb/
The Airship Captain MK-I(yet another steampunk keyboard) - More DIY How To Projects]]> http://cdn.instructables.com/FFP/HLCD/I3THUB7X/FFPHLCDI3THUB7X.SQUARE2.jpg http://cdn.instructables.com/FFP/HLCD/I3THUB7X/FFPHLCDI3THUB7X.SQUARE.jpg http://cdn.instructables.com/FFP/HLCD/I3THUB7X/FFPHLCDI3THUB7X.SMALL.jpg NeIdan Well, first let me state that i made this about 4 years ago, so bare with me.i wanted to try to make a steampunk keyboard that won't require much tools and craftmanship like Datamancer's keyboards which are insane. also to spend as less money as possible and also try to make it on a wireless common ...
By: NeIdan

Continue Reading »]]>
Mon, 22 Dec 2014 16:55:05 PST
Steampunk Props http://www.instructables.com/id/Steampunk-Props/ http://cdn.instructables.com/F6X/5S8U/I3GX925Q/F6X5S8UI3GX925Q.SQUARE2.jpg http://cdn.instructables.com/F6X/5S8U/I3GX925Q/F6X5S8UI3GX925Q.SQUARE.jpg http://cdn.instructables.com/F6X/5S8U/I3GX925Q/F6X5S8UI3GX925Q.SMALL.jpg Grafx4Life A small but growing collection of steampunk themed props. Steampunk Portal Gun A nice looking gun made from an existing toy, by a Canadian! Easy Steam Punk Laser Pistol That Lights Up A great prop laser gun for any steampunk or scifi costume. Dainty Death Dealer Steampunk Watch Some leathe...
By: Grafx4Life

Continue Reading »]]>
Wed, 10 Dec 2014 08:13:10 PST
Steampunk Network Center http://www.instructables.com/id/Steampunk-Network-Center/
Steampunk Network Center - More DIY How To Projects]]> http://cdn.instructables.com/F0H/6LP8/I3BHKRN2/F0H6LP8I3BHKRN2.SQUARE2.jpg http://cdn.instructables.com/F0H/6LP8/I3BHKRN2/F0H6LP8I3BHKRN2.SQUARE.jpg http://cdn.instructables.com/F0H/6LP8/I3BHKRN2/F0H6LP8I3BHKRN2.SMALL.jpg Raltel Hi everybodyI am so glad to present you my newest steampunk object after such a long time of absence.I got the idea for this project after seeing the bird’s nest of cables behind my networking equipment.Organizing the mess of cables under (and on top of) my desk is a never-ending battle, but I came ...
By: Raltel

Continue Reading »]]>
Mon, 8 Dec 2014 14:06:44 PST
No-Sew Victorian Collar from Old Shirt http://www.instructables.com/id/No-Sew-Victorian-Collar-from-Old-Shirt/
No-Sew Victorian Collar from Old Shirt - More DIY How To Projects]]> http://cdn.instructables.com/FCX/VDXR/I3BH643H/FCXVDXRI3BH643H.SQUARE2.jpg http://cdn.instructables.com/FCX/VDXR/I3BH643H/FCXVDXRI3BH643H.SQUARE.jpg http://cdn.instructables.com/FCX/VDXR/I3BH643H/FCXVDXRI3BH643H.SMALL.jpg AJB2 It is so simple! Cut the Collar . This is so simple I am almost embarrassed to post. I was looking for a victorian style collared shirt for a steampunk/wild-weird west costume. I did not want to spend any money and my sewing skills are minimal. I did find an old blue pin-stripe shirt and decided ...
By: AJB2

Continue Reading »]]>
Fri, 5 Dec 2014 13:48:08 PST
Steampunked mp3-player "Junophon" http://www.instructables.com/id/Steampunked-mp3-player-Junophon/
Steampunked mp3-player "Junophon" - More DIY How To Projects]]> http://cdn.instructables.com/FHL/L7U1/I38SAT4O/FHLL7U1I38SAT4O.SQUARE2.jpg http://cdn.instructables.com/FHL/L7U1/I38SAT4O/FHLL7U1I38SAT4O.SQUARE.jpg http://cdn.instructables.com/FHL/L7U1/I38SAT4O/FHLL7U1I38SAT4O.SMALL.jpg Junophor Hi everybodyThis Steampunked-mp3-player "Junophon" is my latest instructables project which I´d like to present to you. And it is the first project where I "upcycled " lots of parts of a former projcet of mine too. Everything started with an new small window frame which was thrown to the firewoo...
By: Junophor

Continue Reading »]]>
Wed, 3 Dec 2014 11:35:43 PST
Folding brass fan with etched designs http://www.instructables.com/id/Folding-brass-fan-with-etched-designs/
Folding brass fan with etched designs - More DIY How To Projects]]> http://cdn.instructables.com/FP6/J9LC/I36LIH4V/FP6J9LCI36LIH4V.SQUARE2.jpg http://cdn.instructables.com/FP6/J9LC/I36LIH4V/FP6J9LCI36LIH4V.SQUARE.jpg http://cdn.instructables.com/FP6/J9LC/I36LIH4V/FP6J9LCI36LIH4V.SMALL.jpg gfish I was asked by my wife to make a credible steampunk fan. We decided to make it out of brass sheet with a gear train pattern etched onto the front side. Now, I must admit, these gears are purely decorative, which is a bit against my core values. But at least they mesh properly, have a reasonable toot...
By: gfish

Continue Reading »]]>
Tue, 2 Dec 2014 23:23:06 PST
High voltage steampunk plasma night light http://www.instructables.com/id/steampunk-plasma-night-light/
High voltage steampunk plasma night light - More DIY How To Projects]]> http://cdn.instructables.com/F0F/WVH8/I31H18LB/F0FWVH8I31H18LB.SQUARE2.jpg http://cdn.instructables.com/F0F/WVH8/I31H18LB/F0FWVH8I31H18LB.SQUARE.jpg http://cdn.instructables.com/F0F/WVH8/I31H18LB/F0FWVH8I31H18LB.SMALL.jpg LoneGinger Based on the very detailed instructables by Junophor and Admiral Aaron Ravensdale I have built a steampunk inspired night light. Using a simple jewelry box, some scrap brass and copper bits and pieces, a High Voltage circuit built up from a single use camera and a little bit of imagination . Because...
By: LoneGinger

Continue Reading »]]>
Fri, 28 Nov 2014 13:15:57 PST
Refurbishing antique radiators http://www.instructables.com/id/Refurbishing-a-Victorian-radiator/
Refurbishing antique radiators - More DIY How To Projects]]> http://cdn.instructables.com/FCC/6ZJF/I2WEP7WA/FCC6ZJFI2WEP7WA.SQUARE2.jpg http://cdn.instructables.com/FCC/6ZJF/I2WEP7WA/FCC6ZJFI2WEP7WA.SQUARE.jpg http://cdn.instructables.com/FCC/6ZJF/I2WEP7WA/FCC6ZJFI2WEP7WA.SMALL.jpg Winged Fist In this Instructable I will detail the steps I took to restore a pair of 19th Century Victorian cast iron radiators, and how I got them to work in my 21st Century home!Why you may ask is this in the Steampunk section? We'll this is the first project I've worked on that actually involves steam. Gener...
By: Winged Fist

Continue Reading »]]>
Mon, 24 Nov 2014 22:24:35 PST
Steampunk Grandmother clock http://www.instructables.com/id/Steampunk-Grandmother-clock/
Steampunk Grandmother clock - More DIY How To Projects]]> http://cdn.instructables.com/F4Y/JI2M/I2TG7IIE/F4YJI2MI2TG7IIE.SQUARE2.jpg http://cdn.instructables.com/F4Y/JI2M/I2TG7IIE/F4YJI2MI2TG7IIE.SQUARE.jpg http://cdn.instructables.com/F4Y/JI2M/I2TG7IIE/F4YJI2MI2TG7IIE.SMALL.jpg tobychan When I found this imitation pendulum clock at the local tip, I instantly had big ideas for steampunking it. It would also go perfectly alongside my steampunk Grandfather clock! Components I had an LCD picture frame/ photo viewer laying around so I had an idea of how I could incorporate it into m...
By: tobychan

Continue Reading »]]>
Sun, 23 Nov 2014 12:23:39 PST
VFD-Tube Thermometer http://www.instructables.com/id/VFD-Tube-Thermometer/
VFD-Tube Thermometer - More DIY How To Projects]]> http://cdn.instructables.com/FPP/O3AV/I2D6NCQR/FPPO3AVI2D6NCQR.SQUARE2.jpg http://cdn.instructables.com/FPP/O3AV/I2D6NCQR/FPPO3AVI2D6NCQR.SQUARE.jpg http://cdn.instructables.com/FPP/O3AV/I2D6NCQR/FPPO3AVI2D6NCQR.SMALL.jpg christian.ich.7 This is a short tutorial about my VFD-Tube Thermometer. I build it because I liked a indoor thermometer that nobody had, except me. I used the VFD-Tubes because I like the retro style. For temperture measure I used a DS1621 connected to a AT89S52 with I2C-Interface, the Sorce-Code is programmed in C...
By: christian.ich.7

Continue Reading »]]>
Tue, 11 Nov 2014 12:45:49 PST
The Giant Edison - A Big Size Steampunk Lamp http://www.instructables.com/id/The-Giant-Edison-A-Big-Size-Steampunk-Lamp/
The Giant Edison - A Big Size Steampunk Lamp - More DIY How To Projects]]> http://cdn.instructables.com/FD0/54I2/I1XENM16/FD054I2I1XENM16.SQUARE2.jpg http://cdn.instructables.com/FD0/54I2/I1XENM16/FD054I2I1XENM16.SQUARE.jpg http://cdn.instructables.com/FD0/54I2/I1XENM16/FD054I2I1XENM16.SMALL.jpg thechocolatist Dear Steampunkers, dear friendsThis time a very short Instructable about a simple idea how to build a nice Steampunk lamp. I found the bulb at a flea market for a few bucks. It was used for industry lights and works with 220 Volts / 750 Watts.Note: If you are not used to work with 110V/220V please a...
By: thechocolatist

Continue Reading »]]>
Sat, 1 Nov 2014 10:25:14 PDT
steampunk T96 airsoft rifle http://www.instructables.com/id/steampunk-T96-airsoft-rifle/
steampunk T96 airsoft rifle - More DIY How To Projects]]> http://cdn.instructables.com/FHE/XZ9O/I1TQN4BT/FHEXZ9OI1TQN4BT.SQUARE2.jpg http://cdn.instructables.com/FHE/XZ9O/I1TQN4BT/FHEXZ9OI1TQN4BT.SQUARE.jpg http://cdn.instructables.com/FHE/XZ9O/I1TQN4BT/FHEXZ9OI1TQN4BT.SMALL.jpg jori.haka Here is my steampunk modified aps t96 airsoft rifle, or as i like to call it, SP96. Next i will show you how to make it, and what you need for it. For base i used my old aps type 96.Parts:Variety of plumbers connectors, i used chromed ones that i painted later.Wooden "pipes" or anything else that's ...
By: jori.haka

Continue Reading »]]>
Wed, 29 Oct 2014 12:47:32 PDT
Easy Steam Punk Laser Pistol That Lights Up http://www.instructables.com/id/Easy-Steam-Punk-Laser-Pistol-That-Lights-Up/
Easy Steam Punk Laser Pistol That Lights Up - More DIY How To Projects]]> http://cdn.instructables.com/FO8/VEAY/I1TNKR4A/FO8VEAYI1TNKR4A.SQUARE2.jpg http://cdn.instructables.com/FO8/VEAY/I1TNKR4A/FO8VEAYI1TNKR4A.SQUARE.jpg http://cdn.instructables.com/FO8/VEAY/I1TNKR4A/FO8VEAYI1TNKR4A.SMALL.jpg SolderingSunday This Steam Punk Laser Pistol is easily made from cardboard, felt, paper fasteners, a LED, and a plastic straw. We made these for the Steam Punk World Faire. They look fantastic and are easy to build. You can build this in a short evening and have it ready for any costume. It makes a perfect companio...
By: SolderingSunday

Continue Reading »]]>
Wed, 29 Oct 2014 10:32:16 PDT
Huge Spider's Web made of an Umbrella http://www.instructables.com/id/Huge-Spiders-Web-made-of-an-Umbrella/
Huge Spider's Web made of an Umbrella - More DIY How To Projects]]> http://cdn.instructables.com/FOD/5I88/I1T47BDX/FOD5I88I1T47BDX.SQUARE2.jpg http://cdn.instructables.com/FOD/5I88/I1T47BDX/FOD5I88I1T47BDX.SQUARE.jpg http://cdn.instructables.com/FOD/5I88/I1T47BDX/FOD5I88I1T47BDX.SMALL.jpg anke-art This idea struck me just in time for Halloween. You can use this Spider's Web as a deco element or even as part of your creepy costume. (tutorial first published here with pics only: http://anke-art.de/en/?p=4267) First you need an old umbrella. Or a new one that was bent by your toddler. This wa...
By: anke-art

Continue Reading »]]>
Tue, 28 Oct 2014 03:37:33 PDT
Victoria Forest - aka the Victorian Forensic Scientist http://www.instructables.com/id/Victoria-Forest-aka-the-Victorian-Forensic-Scienti/
Victoria Forest - aka the Victorian Forensic Scientist - More DIY How To Projects]]> http://cdn.instructables.com/F7Z/MXBX/I24LYMWI/F7ZMXBXI24LYMWI.SQUARE2.jpg http://cdn.instructables.com/F7Z/MXBX/I24LYMWI/F7ZMXBXI24LYMWI.SQUARE.jpg http://cdn.instructables.com/F7Z/MXBX/I24LYMWI/F7ZMXBXI24LYMWI.SMALL.jpg cdstudioNH No, my Sewing Studio did not throw up, it was more of a controlled throw-down.Somehow, I am going to turn bits of all of this stuff into my Costume for this year.I already created my daughter's Sherlock Holmes character, here:http://www.instructables.com/id/Education-never-en...am working on the Sce...
By: cdstudioNH

Continue Reading »]]>
Mon, 27 Oct 2014 21:57:28 PDT
Steampunked triangle water-level http://www.instructables.com/id/Steampunked-triangle-water-level/
Steampunked triangle water-level - More DIY How To Projects]]> http://cdn.instructables.com/FZR/U8Z1/I1IQ9CZC/FZRU8Z1I1IQ9CZC.SQUARE2.jpg http://cdn.instructables.com/FZR/U8Z1/I1IQ9CZC/FZRU8Z1I1IQ9CZC.SQUARE.jpg http://cdn.instructables.com/FZR/U8Z1/I1IQ9CZC/FZRU8Z1I1IQ9CZC.SMALL.jpg Junophor Hi everybodyI am so glad to present you my newest steampunk object after such a long time of absence. Because of being very busy in my steampunk laboratory I have had no time writing about it.But now I want to show you one of my favourite projects of the last months. It is called the "Steampunked...
By: Junophor

Continue Reading »]]>
Tue, 21 Oct 2014 09:02:46 PDT
steampunk octopus hair fancier http://www.instructables.com/id/steampunk-octopus-hair-fancier/
steampunk octopus hair fancier - More DIY How To Projects]]> http://cdn.instructables.com/FOE/CXFX/I1EU8L0K/FOECXFXI1EU8L0K.SQUARE2.jpg http://cdn.instructables.com/FOE/CXFX/I1EU8L0K/FOECXFXI1EU8L0K.SQUARE.jpg http://cdn.instructables.com/FOE/CXFX/I1EU8L0K/FOECXFXI1EU8L0K.SMALL.jpg stephannielynn i have seen a steampunk octopus hair fancier and i really want to make one, so this is my octopus fanicerwhat you'll needstyorfoam ball ( 3inches & 5 inches)feltglass pebblesdollar store wighot glue gunbobby pinspaint cutting board knifehair curlerscurling ironhair spray Building the body so you ...
By: stephannielynn

Continue Reading »]]>
Mon, 20 Oct 2014 17:47:23 PDT