http://www.instructables.com Sat, 2 Jun 2012 14:58:27 PDT BLOX v1.01 http://www.instructables.com/id/How-to-Build-an-Equatorial-Mount-for-Long-Exposure/
How to Build an Equatorial Mount for Long Exposure Astrophotography - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUO/Z49P/H2TIUCSC/FUOZ49PH2TIUCSC.SQUARE2.jpg http://img.instructables.com/files/deriv/FUO/Z49P/H2TIUCSC/FUOZ49PH2TIUCSC.SQUARE.jpg http://img.instructables.com/files/deriv/FUO/Z49P/H2TIUCSC/FUOZ49PH2TIUCSC.SMALL.jpg intelregod Last Fall (2011) I took full advantage of the fantastic sabatical policy where I am employed.  My wife and I spent a good portion of this time driving around the beautiful American Southwest and the many awesome parks on and around the Colorado Plateau.  While driving hundreds of miles in desolate l...
By: intelregod

Continue Reading »]]> Wed, 30 May 2012 23:53:29 PDT http://www.instructables.com/id/Easy-Headphone-Repair-for-Broken-Wires/
Easy Headphone Repair for Broken Wires - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXT/JDZ4/FFKEK6KH/FXTJDZ4FFKEK6KH.SQUARE2.jpg http://img.instructables.com/files/deriv/FXT/JDZ4/FFKEK6KH/FXTJDZ4FFKEK6KH.SQUARE.jpg http://img.instructables.com/files/deriv/FXT/JDZ4/FFKEK6KH/FXTJDZ4FFKEK6KH.SMALL.jpg killersquirel11 If your headphones don't work and you know its not near the jack, the fix is easy... no more than 10 minutes if you know what you're doing. Mine took a little longer since I was working on my friend's headphones at the time and they are fairly complicated. The headphones used in this instructable ar...
By: killersquirel11

Continue Reading »]]> Mon, 28 Apr 2008 19:44:44 PDT http://www.instructables.com/id/Glass-Potato-Chips/
Glass Potato Chips - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FRJ/AVNC/H2ULRE6C/FRJAVNCH2ULRE6C.SQUARE2.jpg http://img.instructables.com/files/deriv/FRJ/AVNC/H2ULRE6C/FRJAVNCH2ULRE6C.SQUARE.jpg http://img.instructables.com/files/deriv/FRJ/AVNC/H2ULRE6C/FRJAVNCH2ULRE6C.SMALL.jpg lmnopeas Let's be honest: Potato chips are boring. Every time I wander the chip aisle of the grocery store, there is some supposedly new twist on the potato chip. Classic. Jalapeno. Terra Blue. Vinegar and salt. Vidalia onion. Ranch. Whatever. Most are a disappointment. Why couldn't the potato chip be beaut...
By: lmnopeas

Continue Reading »]]> Thu, 31 May 2012 20:29:30 PDT http://www.instructables.com/id/Separate-Hydrogen-and-Oxygen-from-Water-Through-El/
Separate Hydrogen and Oxygen from Water Through Electrolysis - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4A/54HN/F5R8MQ53/F4A54HNF5R8MQ53.SQUARE2.jpg http://img.instructables.com/files/deriv/F4A/54HN/F5R8MQ53/F4A54HNF5R8MQ53.SQUARE.jpg http://img.instructables.com/files/deriv/F4A/54HN/F5R8MQ53/F4A54HNF5R8MQ53.SMALL.gif hooloovoo33 Electrolysis a method of separating elements by pushing an electric current through a compound. It is used in various industrial applications such as removing copper from its ore. It is also used to separate hydrogen and oxygen from water. Electrolysis isn't the most efficient way to obtain hydrog...
By: hooloovoo33

Continue Reading »]]> Mon, 27 Aug 2007 11:36:10 PDT http://www.instructables.com/id/Easy-Mini-Quiche-Recipe/
Easy Mini Quiche Recipe - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNM/C3XR/G4JV6TB5/FNMC3XRG4JV6TB5.SQUARE2.jpg http://img.instructables.com/files/deriv/FNM/C3XR/G4JV6TB5/FNMC3XRG4JV6TB5.SQUARE.jpg http://img.instructables.com/files/deriv/FNM/C3XR/G4JV6TB5/FNMC3XRG4JV6TB5.SMALL.jpg scoochmaroo Mini quiche is one of the world's most perfect foods. They're fun to make and even more fun to eat! You can fill them with anything you like, and make them with any kind of crust, or go gluten-free. Make them in a muffin tin, or go super adorable with a mini muffin tin! Better than a normal quiche, ...
By: scoochmaroo

Continue Reading »]]> Mon, 21 Mar 2011 16:05:01 PDT http://www.instructables.com/id/DIY-LED-Lamp/
DIY LED Lamp - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FJY/6C6I/H2ULR69D/FJY6C6IH2ULR69D.SQUARE2.jpg http://img.instructables.com/files/deriv/FJY/6C6I/H2ULR69D/FJY6C6IH2ULR69D.SQUARE.jpg http://img.instructables.com/files/deriv/FJY/6C6I/H2ULR69D/FJY6C6IH2ULR69D.SMALL.jpg venom_man This is a step by step guide on how to build your own modern LED lamp from a 3D model,  using a laser cutter and some simple electrical components . I actually used this as an architectural model but the end result  creates a pretty sweet lamp. The design that is attached it slightly different from ...
By: venom_man

Continue Reading »]]> Wed, 30 May 2012 22:07:07 PDT http://www.instructables.com/id/How-To-Connect-your-Wiimote-to-your-PC-via-Blueto/
How To: Connect your Wiimote to your computer via Bluetooth - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F55/QRB7/FBJIMSCU/F55QRB7FBJIMSCU.SQUARE2.jpg http://img.instructables.com/files/deriv/F55/QRB7/FBJIMSCU/F55QRB7FBJIMSCU.SQUARE.jpg http://img.instructables.com/files/deriv/F55/QRB7/FBJIMSCU/F55QRB7FBJIMSCU.SMALL.gif The Uber Maker Did you know the Wiimote's capabilities reach far beyond the uses Nintendo is limiting it to? It's true, and in this tutorial I will show you how to connect your Wiimote to your computer and open up a limitless range of opportunities. Most people don't know that the Wiimote communicates with the Wi...
By: The Uber Maker

Continue Reading »]]> Fri, 18 Jan 2008 11:10:57 PST http://www.instructables.com/id/Professional-drawing-tutorial!!!/
How to draw the female eye - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1A/5SF6/FA190T5J/F1A5SF6FA190T5J.SQUARE2.jpg http://img.instructables.com/files/deriv/F1A/5SF6/FA190T5J/F1A5SF6FA190T5J.SQUARE.jpg http://img.instructables.com/files/deriv/F1A/5SF6/FA190T5J/F1A5SF6FA190T5J.SMALL.jpg The Artist Learn to become a professional pencil artist. This tutorial will show you how to draw the female eye. You can find more drawing tips at my website. You can view a Mustang drawing video that I made at step 10! check it out :) Basic Shape As reference I will use Adriana Lima's eye, because it's a v...
By: The Artist

Continue Reading »]]> Thu, 20 Dec 2007 14:42:56 PST http://www.instructables.com/id/Needle-Tatting-A-Necklace/
Needle Tatting A Necklace - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F0E/AWFZ/FT7PQLIW/F0EAWFZFT7PQLIW.SQUARE2.jpg http://img.instructables.com/files/deriv/F0E/AWFZ/FT7PQLIW/F0EAWFZFT7PQLIW.SQUARE.jpg http://img.instructables.com/files/deriv/F0E/AWFZ/FT7PQLIW/F0EAWFZFT7PQLIW.SMALL.jpg TotusMel If you've mastered the tatted flower instructable, you're ready to learn a few new techniques. This necklace will help you learn split rings, josephine knots and clovers to create a wearable piece of tatted art. This necklace is a modified version of my Fleurette necklace. You will need basic need...
By: TotusMel

Continue Reading »]]> Wed, 8 Apr 2009 15:49:19 PDT http://www.instructables.com/id/Make-an-all-purpose-organic-pesticide-from-vegetab/
Make an all purpose organic pesticide from vegetables - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEX/7JOJ/FE7ITRX9/FEX7JOJFE7ITRX9.SQUARE2.jpg http://img.instructables.com/files/deriv/FEX/7JOJ/FE7ITRX9/FEX7JOJFE7ITRX9.SQUARE.jpg http://img.instructables.com/files/deriv/FEX/7JOJ/FE7ITRX9/FEX7JOJFE7ITRX9.SMALL.jpg iPodGuy This instructable will show how I made a cheap, all-purpose organic pesticide for my herb & vegetable garden. It can be used on a variety of insects that live in the dirt or on the plants including worms, mites and other parasites. This entire pesticide will eventually break down and be reduced to...
By: iPodGuy

Continue Reading »]]> Mon, 24 Mar 2008 15:04:42 PDT http://www.instructables.com/id/Duct-Tape-Quick-Dots/ http://img.instructables.com/files/deriv/FTE/KGQ3/H2TJ4JHV/FTEKGQ3H2TJ4JHV.SQUARE2.jpg http://img.instructables.com/files/deriv/FTE/KGQ3/H2TJ4JHV/FTEKGQ3H2TJ4JHV.SQUARE.jpg http://img.instructables.com/files/deriv/FTE/KGQ3/H2TJ4JHV/FTEKGQ3H2TJ4JHV.SMALL.jpg Mrballeng Every so often I have a project where I need small pieces of duct tape. These “dots” make for neatly cut circles with an easy to peel backing. To make them you need wax paper, duct tape and, a gasket punch. Though, a larger paper cutting die could work too.
By: Mrballeng

Continue Reading »]]> Tue, 29 May 2012 20:40:23 PDT http://www.instructables.com/id/The-30-second-second-password-hack-and-how-to-pro/
The 30 second password hack (and how to protect yourself from it) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1E/AKC9/FEMY2VY1/F1EAKC9FEMY2VY1.SQUARE2.jpg http://img.instructables.com/files/deriv/F1E/AKC9/FEMY2VY1/F1EAKC9FEMY2VY1.SQUARE.jpg http://img.instructables.com/files/deriv/F1E/AKC9/FEMY2VY1/F1EAKC9FEMY2VY1.SMALL.jpg duck-lemon Ever need to get someones password (or your own) RIGHT FREAKING NOW!Heres how to find out any internet password in 30 seconds with no software or HTML!**************************************************Disclaimer***********************************************This information is for informational purp...
By: duck-lemon

Continue Reading »]]> Sun, 6 Apr 2008 23:39:56 PDT http://www.instructables.com/id/Fix-It/
Fix-It Channel - More DIY How To Projects]]> /static/defaultIMG/default.SQUARE2.gif /static/defaultIMG/default.SQUARE.gif /static/defaultIMG/default.SMALL.gif Ace Fix it Wooden Bench Worm Cafe - Compost with earthworms right in your garden Tormato! Tomato Cage With Trellis and Nutrient Delivery System Lawn Striper A Garden Shower in ten minutes and less than 8$ ...
By: Ace Fix it

Continue Reading »]]> Mon, 17 May 2010 15:48:16 PDT http://www.instructables.com/id/Homemade-chocolate-using-cocoa-powder/
Homemade chocolate using cocoa powder - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBK/3VGN/GN1I6DEL/FBK3VGNGN1I6DEL.SQUARE2.jpg http://img.instructables.com/files/deriv/FBK/3VGN/GN1I6DEL/FBK3VGNGN1I6DEL.SQUARE.jpg http://img.instructables.com/files/deriv/FBK/3VGN/GN1I6DEL/FBK3VGNGN1I6DEL.SMALL.jpg LordShigi Most of us can't get cocoa beans where they live, or it's just too expensive. With this simple Instructable I will show you how to make delicious chocolate at home using only the basic ingredients which everybody has at home or can get at local supermarket for small amount of money. For your conven...
By: LordShigi

Continue Reading »]]> Thu, 28 Apr 2011 04:22:13 PDT http://www.instructables.com/id/Chibikart-Rapid-Prototyping-a-Subminiature-Electr/
Chibikart: Rapid-Prototyping a Subminiature Electric Go-Kart Using Digital Fabrication and Hobby Components - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWB/T2ST/H2TJ4UZB/FWBT2STH2TJ4UZB.SQUARE2.jpg http://img.instructables.com/files/deriv/FWB/T2ST/H2TJ4UZB/FWBT2STH2TJ4UZB.SQUARE.jpg http://img.instructables.com/files/deriv/FWB/T2ST/H2TJ4UZB/FWBT2STH2TJ4UZB.SMALL.jpg teamtestbot
By: teamtestbot

Continue Reading »]]> Fri, 1 Jun 2012 08:44:23 PDT http://www.instructables.com/id/How-to-Build-the-Perfect-Zombie-Survival-Kit/
How to Build the Perfect Zombie Survival Kit... - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FDR/7B8U/GJQE8RBS/FDR7B8UGJQE8RBS.SQUARE2.jpg http://img.instructables.com/files/deriv/FDR/7B8U/GJQE8RBS/FDR7B8UGJQE8RBS.SQUARE.jpg http://img.instructables.com/files/deriv/FDR/7B8U/GJQE8RBS/FDR7B8UGJQE8RBS.SMALL.jpg mooman666 So you want to learn how to build an excellent zombie survival kit, and honestly your best bet would be to read zombie survival guide by max brooks. However if you lack time, funds or are just lazy I'll cut to the chase and give you a quick, light and excellent kit to survival the undead nightmare.....
By: mooman666

Continue Reading »]]> Sat, 5 Feb 2011 12:18:29 PST http://www.instructables.com/id/DIY-Hammock-Stand/
DIY Hammock Stand - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5A/SHZV/F4AQNWHN/F5ASHZVF4AQNWHN.SQUARE2.jpg http://img.instructables.com/files/deriv/F5A/SHZV/F4AQNWHN/F5ASHZVF4AQNWHN.SQUARE.jpg http://img.instructables.com/files/deriv/F5A/SHZV/F4AQNWHN/F5ASHZVF4AQNWHN.SMALL.jpg vicbp We recently bought a portable hammock and we've enjoyed so much on our hiking and camping trips that I decided I wanted to hang it at home to enjoy on our backyard. I looked at the available hammock stands and they seemed quite expensive but very simple so I decided to give it a try. I based the des...
By: vicbp

Continue Reading »]]> Thu, 19 Jul 2007 13:29:26 PDT http://www.instructables.com/id/Pan-fried-Salmon/
Pan-fried Salmon - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FF3/IOQ0/YAPET2JY67G/FF3IOQ0YAPET2JY67G.SQUARE2.jpg http://img.instructables.com/files/deriv/FF3/IOQ0/YAPET2JY67G/FF3IOQ0YAPET2JY67G.SQUARE.jpg http://img.instructables.com/files/deriv/FF3/IOQ0/YAPET2JY67G/FF3IOQ0YAPET2JY67G.SMALL.jpg canida Easy salmon fillets in less than 10 minutes. Prep pan Preheat a non-stick pan, spray it with canola oil, and add the spices of your choice. This layer of spice will adhere to the underside of your fish, avoiding the messy procedure of seasoning on the counter. I used fresh ground black pepper a...
By: canida

Continue Reading »]]> Wed, 11 Oct 2006 16:18:39 PDT http://www.instructables.com/id/Elf-Ears-custom-made-in-silicone-rubber/
Elf Ears, custom-made in silicone rubber - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FXY/LEU1/H2TIBAMB/FXYLEU1H2TIBAMB.SQUARE2.jpg http://img.instructables.com/files/deriv/FXY/LEU1/H2TIBAMB/FXYLEU1H2TIBAMB.SQUARE.jpg http://img.instructables.com/files/deriv/FXY/LEU1/H2TIBAMB/FXYLEU1H2TIBAMB.SMALL.jpg Scotttland   While costume shops have been selling foam latex pointed ears for some time, their generic one-size-fits-all shape means a standard and relatively bulky set of points which can never completely blend with a human’s natural earlobes.   The extra-soft and porous nature of foam latex also means the e...
By: Scotttland

Continue Reading »]]> Thu, 31 May 2012 15:05:25 PDT http://www.instructables.com/id/How-to-Build-and-Arm-a-Scale-Model-Battleship-From/ http://img.instructables.com/files/deriv/F0R/OF1T/H2MYK4PD/F0ROF1TH2MYK4PD.SQUARE2.jpg http://img.instructables.com/files/deriv/F0R/OF1T/H2MYK4PD/F0ROF1TH2MYK4PD.SQUARE.jpg http://img.instructables.com/files/deriv/F0R/OF1T/H2MYK4PD/F0ROF1TH2MYK4PD.SMALL.jpg picklwg Welcome to the fascinating world of R/C BIG GUN Warship Combat. So what exactly is R/C Warship combat? It is a hobby where scale model warships, armed with low-pressure CO2 cannons, fire small ball bearings at an opposing ship.  When enough holes are put in the easily punctured balsa wood covered hu...
By: picklwg

Continue Reading »]]> Fri, 25 May 2012 19:01:58 PDT http://www.instructables.com/id/The-Amazing-Solar-Powered-Fan-A-Green-Gadget/
How to Make A Solar Powered Fan! - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F2E/ATDK/FGH272MR/F2EATDKFGH272MR.SQUARE2.jpg http://img.instructables.com/files/deriv/F2E/ATDK/FGH272MR/F2EATDKFGH272MR.SQUARE.jpg http://img.instructables.com/files/deriv/F2E/ATDK/FGH272MR/F2EATDKFGH272MR.SMALL.jpg Gjdj3 (''Hooray! It's finally done. It's a bit late into the contest but we hope it is good!'')This project is what we're entering for the Go Green contest. It's a cool solar powered mini-fan. The idea is that if you had a fan you would use the air conditioning less. And it's solar powered so that it has ...
By: Gjdj3

Continue Reading »]]> Wed, 7 May 2008 14:06:32 PDT http://www.instructables.com/id/20-Geodesic-Dome-Greenhouse/
20' Geodesic Dome Greenhouse - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FYY/K4S8/H27LSAVO/FYYK4S8H27LSAVO.SQUARE2.jpg http://img.instructables.com/files/deriv/FYY/K4S8/H27LSAVO/FYYK4S8H27LSAVO.SQUARE.jpg http://img.instructables.com/files/deriv/FYY/K4S8/H27LSAVO/FYYK4S8H27LSAVO.SMALL.jpg MrAdventure Geodesic Domes are awesome.  This Instructable will show you how I built a 20' dome for about $250, with the majority of that cost being the greenhouse plastic ($167 with shipping.)  That's right, the structure itself cost less than $100!  I will also write about what is wrong with this design, how ...
By: MrAdventure

Continue Reading »]]> Sat, 26 May 2012 01:59:35 PDT http://www.instructables.com/id/PCB-Quadrotor-Brushless/
PCB Quadrotor (Brushless) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FK2/KLWQ/H2MYKEB7/FK2KLWQH2MYKEB7.SQUARE2.jpg http://img.instructables.com/files/deriv/FK2/KLWQ/H2MYKEB7/FK2KLWQH2MYKEB7.SQUARE.jpg http://img.instructables.com/files/deriv/FK2/KLWQ/H2MYKEB7/FK2KLWQH2MYKEB7.SMALL.jpg scolton Quadrotors are the new Segways: a mesmerizing, somewhat magical, self-stabilizing platform that every tech person wants to have. You can't ride a quadrotor (well, maybe you can), but they do fly, and you can build one yourself from scratch! I helped with a previous quadrotor build (Instructable her...
By: scolton

Continue Reading »]]> Thu, 31 May 2012 08:05:11 PDT http://www.instructables.com/id/Gyro-Flyer/
Gyro Flyer - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F40/D7DZ/H2MYEJFU/F40D7DZH2MYEJFU.SQUARE2.jpg http://img.instructables.com/files/deriv/F40/D7DZ/H2MYEJFU/F40D7DZH2MYEJFU.SQUARE.jpg http://img.instructables.com/files/deriv/F40/D7DZ/H2MYEJFU/F40D7DZH2MYEJFU.SMALL.jpg Childrens Museum of Houston Make a cylindrical paper airplane! This is one of the 48 projects for our Instructables: Made In Your Mind (IMIYM) exhibition at the Children’s Museum of Houston showing from May 26, 2012 - November 4, 2012. Produced in partnership with Instructables, IMIYM is an exhibit where families work togethe...
By: Childrens Museum of Houston

Continue Reading »]]> Fri, 25 May 2012 09:34:58 PDT http://www.instructables.com/id/DIY-Green-Hedge-on-the-wall-itself/
DIY Green Hedge on the wall itself - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FEL/1KKR/H27LSOZ5/FEL1KKRH27LSOZ5.SQUARE2.jpg http://img.instructables.com/files/deriv/FEL/1KKR/H27LSOZ5/FEL1KKRH27LSOZ5.SQUARE.jpg http://img.instructables.com/files/deriv/FEL/1KKR/H27LSOZ5/FEL1KKRH27LSOZ5.SMALL.jpg bhvm There are two things that I am fond of, Greenery and Natural Privacy. I always wanted some privacy around the perimiter of my house. Why not get them both at once? So there goes my MR.BRAIN for some hunt. And I have an Idea...... Talent hunt One main problem that I identified was lack of space....
By: bhvm

Continue Reading »]]> Sun, 27 May 2012 06:33:49 PDT http://www.instructables.com/id/KidWash%3a-PVC-Sprinkler-Water-Toy/
KidWash: PVC Sprinkler Water Toy - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6J/8L81/DS3EQZJHZJJ/F6J8L81DS3EQZJHZJJ.SQUARE2.jpg http://img.instructables.com/files/deriv/F6J/8L81/DS3EQZJHZJJ/F6J8L81DS3EQZJHZJJ.SQUARE.jpg http://img.instructables.com/files/deriv/F6J/8L81/DS3EQZJHZJJ/F6J8L81DS3EQZJHZJJ.SMALL.jpg discontinuity Make a fun summer sprinkler toy from PVC to help the kids beat the heat. total cost: $9.51 total time: about 1 hour Go shopping Head to your local hardware store and pick up: 2 ten foot lengths of PVC. (I used 3/4" but feel free to use other sizes, just be sure your fittings are the same d...
By: discontinuity

Continue Reading »]]> Fri, 18 Aug 2006 01:25:53 PDT http://www.instructables.com/id/Water-Table-for-the-Kids/
Water Table, for the Kids - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F37/9IUB/GP3T1XHM/F379IUBGP3T1XHM.SQUARE2.jpg http://img.instructables.com/files/deriv/F37/9IUB/GP3T1XHM/F379IUBGP3T1XHM.SQUARE.jpg http://img.instructables.com/files/deriv/F37/9IUB/GP3T1XHM/F379IUBGP3T1XHM.SMALL.jpg theerikjohnson I decided to make a fun water table for my son’s first birthday. He loves water in the sink and the bathtub so instead of getting a boring old tiny pool, I went this route. I wanted fountains and sprayers and a self contained reservoir and pump so it wouldn’t need to be attached to the hose. I got a...
By: theerikjohnson

Continue Reading »]]> Sun, 19 Jun 2011 15:12:25 PDT http://www.instructables.com/id/360-analog-camera-hat/
360° analog camera hat - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6I/GGBT/H1AH6SA1/F6IGGBTH1AH6SA1.SQUARE2.jpg http://img.instructables.com/files/deriv/F6I/GGBT/H1AH6SA1/F6IGGBTH1AH6SA1.SQUARE.jpg http://img.instructables.com/files/deriv/F6I/GGBT/H1AH6SA1/F6IGGBTH1AH6SA1.SMALL.jpg mikeasaurus Forget Instagram, bring back that retro look to your pictures by using classic analog film in a fun new way. This camera hat was made using leftover single-use 35mm film cameras and several small servo motors, all powered by two AA batteries. With the camera array sitting on your head, you're able t...
By: mikeasaurus

Continue Reading »]]> Tue, 29 May 2012 19:35:17 PDT http://www.instructables.com/id/Skyrim-Iron-Helmet-1/
Skyrim Iron Helmet - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FAG/V266/H2MYHF6U/FAGV266H2MYHF6U.SQUARE2.jpg http://img.instructables.com/files/deriv/FAG/V266/H2MYHF6U/FAGV266H2MYHF6U.SQUARE.jpg http://img.instructables.com/files/deriv/FAG/V266/H2MYHF6U/FAGV266H2MYHF6U.SMALL.jpg chichill So for you fans or The Elder Scrolls franchise, or just simply Skyrim. Here's one of the most iconic helmets in the game. This is my first time crafting so it's a great great risk for me to do it. But hell, it's been fun and I finished it nicely. :) ENJOY! Materials and PEPAKURA!!!!!! Materials!...
By: chichill

Continue Reading »]]> Sat, 26 May 2012 07:36:23 PDT http://www.instructables.com/id/IntroductionGathering-Materials/
Inverted Wine Bottle Planter - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6V/NWPJ/H2MYM0N6/F6VNWPJH2MYM0N6.SQUARE2.jpg http://img.instructables.com/files/deriv/F6V/NWPJ/H2MYM0N6/F6VNWPJH2MYM0N6.SQUARE.jpg http://img.instructables.com/files/deriv/F6V/NWPJ/H2MYM0N6/F6VNWPJH2MYM0N6.SMALL.jpg coolname123 Introduction/Gathering Materials So a while ago I found a couple of Instructables about how to turn old plastic coke bottles and other various items into upside-down hanging planters (such as this one here). I thought it was kind of a cool idea, but it just looked far to scrappy to fit in with the ...
By: coolname123

Continue Reading »]]> Sun, 27 May 2012 21:38:18 PDT http://www.instructables.com/id/3-Axis-CNC-Router---60x60x5---JunkBot/
3 Axis CNC Router - 60"x60"x5" - JunkBot - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SQUARE2.jpg http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SQUARE.jpg http://img.instructables.com/files/deriv/F72/85IS/FAQEDKD8/F7285ISFAQEDKD8.SMALL.jpg russaanderson This Instructable is the first in a series documenting the construction of a DIY 3 axis CNC router. This is also my entry for the Universal Laser Cutter Contest.The goal of this Instructable is not to show a full step by step progression but rather to pass along my experiences with making my own CNC...
By: russaanderson

Continue Reading »]]> Tue, 1 Jan 2008 23:56:07 PST http://www.instructables.com/id/Wooden-mice-by-AlestRukov/
Wooden mice by AlestRukov - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FU5/9OH1/H2MYK5O0/FU59OH1H2MYK5O0.SQUARE2.jpg http://img.instructables.com/files/deriv/FU5/9OH1/H2MYK5O0/FU59OH1H2MYK5O0.SQUARE.jpg http://img.instructables.com/files/deriv/FU5/9OH1/H2MYK5O0/FU59OH1H2MYK5O0.SMALL.jpg AlestRukov You need CAD software, a CNC milling machine (you can rent time on it), a lot of spare time and even more persistence. I don’t like plastic. Instead, I like nature and that’s why I have developed and now produce wooden mice. They are beautiful, pleasant to hold in your hand and make your hand less ...
By: AlestRukov

Continue Reading »]]> Sun, 27 May 2012 12:39:24 PDT http://www.instructables.com/id/GoPro-Pan-N-Tilt-RC/
GoPro Pan-N-Tilt RC - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4J/3CY6/H28RRV3J/F4J3CY6H28RRV3J.SQUARE2.jpg http://img.instructables.com/files/deriv/F4J/3CY6/H28RRV3J/F4J3CY6H28RRV3J.SQUARE.jpg http://img.instructables.com/files/deriv/F4J/3CY6/H28RRV3J/F4J3CY6H28RRV3J.SMALL.jpg Wallaby13 First off:  1) This is my first instructable so if i leave something out just ask. 2) I suck at spelling and grammar. 3) Im going to assume that you kinda know how to use tools, and a measuring devise. 4) If I jump around some its because this is just what was done, the order in witch it is done doe...
By: Wallaby13

Continue Reading »]]> Mon, 28 May 2012 16:13:54 PDT http://www.instructables.com/id/Free-form-curved-furniture-without-molds-Part-1/
Free-form curved furniture without molds / Part 1 - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F5V/IBFZ/H2MYJY3F/F5VIBFZH2MYJY3F.SQUARE2.jpg http://img.instructables.com/files/deriv/F5V/IBFZ/H2MYJY3F/F5VIBFZH2MYJY3F.SQUARE.jpg http://img.instructables.com/files/deriv/F5V/IBFZ/H2MYJY3F/F5VIBFZH2MYJY3F.SMALL.jpg pseaton Ever heard of Zipshape? It's a technique developed by Schindler Salmeron which lets you to draw a free-form profile curve for (say) a piece of furniture, and then cut a series of teeth into two sheets of thick material like MDF. Those custom-cut teeth are very specifically shaped and matched to...
By: pseaton

Continue Reading »]]> Sat, 26 May 2012 19:20:45 PDT http://www.instructables.com/id/Inflatable-Bed-to-Stand-Up-Paddle-Board-Pump-Adapt/
Inflatable Bed to Stand-Up Paddle Board Pump Adapter - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F4C/NQAT/H2MYJRBN/F4CNQATH2MYJRBN.SQUARE2.jpg http://img.instructables.com/files/deriv/F4C/NQAT/H2MYJRBN/F4CNQATH2MYJRBN.SQUARE.jpg http://img.instructables.com/files/deriv/F4C/NQAT/H2MYJRBN/F4CNQATH2MYJRBN.SMALL.jpg ewilhelm Across Tomales Bay in Point Reyes National park are some of my favorite campsites, which can only be reached by boat.  On our most recent trip, my wife, Christy, was concerned about sleeping comfortably on just a sleeping pad due to a rib injury and being many months pregnant.  Since we either sail ...
By: ewilhelm

Continue Reading »]]> Fri, 25 May 2012 13:22:54 PDT http://www.instructables.com/id/Spools-of-Thread-Cake-Pops/
Spools of Thread Cake Pops - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FB2/VCPG/H2MYIO4R/FB2VCPGH2MYIO4R.SQUARE2.jpg http://img.instructables.com/files/deriv/FB2/VCPG/H2MYIO4R/FB2VCPGH2MYIO4R.SQUARE.jpg http://img.instructables.com/files/deriv/FB2/VCPG/H2MYIO4R/FB2VCPGH2MYIO4R.SMALL.jpg 6bittersweets I made these chocolate cookies and cream (Oreo) cake pops to look like spools of thread for a Vintage Sewing-Themed Kids Birthday Party. You can see photos of the party HERE and find many more recipes, photos, and tutorials on my blog, 6 Bittersweets. Makes about 20 to 23 lollipops XIAOLU'S NO...
By: 6bittersweets

Continue Reading »]]> Sat, 26 May 2012 21:50:02 PDT http://www.instructables.com/id/The-Govnot-An-attempt-to-turn-an-old-frame-into/
The Gov'not - An attempt to turn an old frame into a copy of a vintage path racer - Pashley Gov'nor- for Ã�£50. - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F6P/OEK7/H2MYKANQ/F6POEK7H2MYKANQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F6P/OEK7/H2MYKANQ/F6POEK7H2MYKANQ.SQUARE.jpg http://img.instructables.com/files/deriv/F6P/OEK7/H2MYKANQ/F6POEK7H2MYKANQ.SMALL.jpg FriendOfHumanity This is the Pashley Gov'nor . . . it is simply beautiful . . . sit and stare at it for a while, it will make you feel nice . . .                http://www.pashley.co.uk/products/guvnor.html It is based on the model made by Pashley in the 1930s but is equipped with modern components, (either sing...
By: FriendOfHumanity

Continue Reading »]]> Mon, 28 May 2012 11:02:21 PDT http://www.instructables.com/id/Introduction-30/
Scanning Film Negatives with a DSLR - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FU8/UBLA/H2MYIPUB/FU8UBLAH2MYIPUB.SQUARE2.jpg http://img.instructables.com/files/deriv/FU8/UBLA/H2MYIPUB/FU8UBLAH2MYIPUB.SQUARE.jpg http://img.instructables.com/files/deriv/FU8/UBLA/H2MYIPUB/FU8UBLAH2MYIPUB.SMALL.jpg pauloricca Well, lets just say I've gotten better at this over the last couple of years. The left image was one of the first I've "scanned" with my DSLR, and the one on the right I've just rescanned using the techniques described below (higher resolution available here). Right now I can get higher resolution a...
By: pauloricca

Continue Reading »]]> Sun, 27 May 2012 18:04:35 PDT http://www.instructables.com/id/Cover-your-worn-bicycle-saddle-with-real-leather/
Cover your worn bicycle saddle with real leather - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FNK/CVX5/FAKWQ9O2/FNKCVX5FAKWQ9O2.SQUARE2.jpg http://img.instructables.com/files/deriv/FNK/CVX5/FAKWQ9O2/FNKCVX5FAKWQ9O2.SQUARE.jpg http://img.instructables.com/files/deriv/FNK/CVX5/FAKWQ9O2/FNKCVX5FAKWQ9O2.SMALL.jpg thearchitect Right, I found this stray bike to fix myself this cheap recycled bike to get around (another instructable topic). It had a decent Selle Italia saddle on it, however the vinyl cover on it was completely shot. Fortunately the foam was intact and in good shape. So I decided to refinish the saddle with ...
By: thearchitect

Continue Reading »]]> Thu, 27 Dec 2007 13:14:31 PST http://www.instructables.com/id/Backyard-planter-and-seating/
Backyard planter and seating - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FMJ/45DI/H21CGMKK/FMJ45DIH21CGMKK.SQUARE2.jpg http://img.instructables.com/files/deriv/FMJ/45DI/H21CGMKK/FMJ45DIH21CGMKK.SQUARE.jpg http://img.instructables.com/files/deriv/FMJ/45DI/H21CGMKK/FMJ45DIH21CGMKK.SMALL.jpg solmstea I got a new house with a teeny tiny backyard (roughly 15 x 10) that ends at someone else's side wall. When you look out the dining room window, all you see is brick. So I thought it would be nice to make some planters in which to grow climbing green things (so far, got cucumber, tomato, and various ...
By: solmstea

Continue Reading »]]> Mon, 21 May 2012 19:21:40 PDT http://www.instructables.com/id/3D-Layered-Paper/
3D Layered Paper - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FR1/5BPD/H2MYHG9L/FR15BPDH2MYHG9L.SQUARE2.jpg http://img.instructables.com/files/deriv/FR1/5BPD/H2MYHG9L/FR15BPDH2MYHG9L.SQUARE.jpg http://img.instructables.com/files/deriv/FR1/5BPD/H2MYHG9L/FR15BPDH2MYHG9L.SMALL.jpg hannaoh This is a simple 3D layered paper project that anyone can do from home. The paper sculpture is simply several layers of cutout paper that enhances and defines the image, making the 2D paper look as though it is 3D. It does take REALLY long to complete but once it is done, it looks beautiful. Hope th...
By: hannaoh

Continue Reading »]]> Sun, 27 May 2012 03:14:33 PDT http://www.instructables.com/id/Decoy-Gift-Wrapping/
Decoy Gift Wrapping - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F1C/Z0KY/GWF613IC/F1CZ0KYGWF613IC.SQUARE2.jpg http://img.instructables.com/files/deriv/F1C/Z0KY/GWF613IC/F1CZ0KYGWF613IC.SQUARE.jpg http://img.instructables.com/files/deriv/F1C/Z0KY/GWF613IC/F1CZ0KYGWF613IC.SMALL.jpg gogglecrab The holiday season is here and Christmas is just around the corner, Which got me thinking... wouldn't a Christmas or a birthday gift be more of a surprise if the person was expecting the expected and received the unexpected? (try saying that 3 times fast!) And that's when I came up with the Decoy gi...
By: gogglecrab

Continue Reading »]]> Fri, 23 Dec 2011 16:24:51 PST http://www.instructables.com/id/How-to-make-a-toggling-bed/
How to make a toggling bed - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FWS/EXWW/H27LRTA5/FWSEXWWH27LRTA5.SQUARE2.jpg http://img.instructables.com/files/deriv/FWS/EXWW/H27LRTA5/FWSEXWWH27LRTA5.SQUARE.jpg http://img.instructables.com/files/deriv/FWS/EXWW/H27LRTA5/FWSEXWWH27LRTA5.SMALL.jpg flavien008 I needed a bed I can toggle to open the door of the balcony. the rotation is manual, and it's made by a 6mm metal screw. you can see the real result. for the one likes virtual result, you can open the google.SketchUp file with the real measures. enjoy PS: ...
By: flavien008

Continue Reading »]]> Fri, 18 May 2012 13:11:51 PDT http://www.instructables.com/id/Anti-Cat-Poop-Garden/
Anti-Cat Poop Garden - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FD4/O7HQ/FVW22FDL/FD4O7HQFVW22FDL.SQUARE2.jpg http://img.instructables.com/files/deriv/FD4/O7HQ/FVW22FDL/FD4O7HQFVW22FDL.SQUARE.jpg http://img.instructables.com/files/deriv/FD4/O7HQ/FVW22FDL/FD4O7HQFVW22FDL.SMALL.jpg damoelld I Like Cats and I Like Gardens!But....I HATE Cat Poop!I have tried everything to deter the furry little beasts from using my garden as a dumping ground (pardon the pun). I have found a non-toxic, animal friendly, long lasting and inexpensive way to discourage the furry felines from leaving their not...
By: damoelld

Continue Reading »]]> Mon, 15 Jun 2009 19:59:39 PDT http://www.instructables.com/id/Turn-a-pencil-drawing-into-a-capacitive-sensor-for/
Turn a pencil drawing into a capacitive sensor for Arduino - More DIY How To Projects]]> http://img.instructables.com/files/deriv/F3T/9NT5/H2MYJXGQ/F3T9NT5H2MYJXGQ.SQUARE2.jpg http://img.instructables.com/files/deriv/F3T/9NT5/H2MYJXGQ/F3T9NT5H2MYJXGQ.SQUARE.jpg http://img.instructables.com/files/deriv/F3T/9NT5/H2MYJXGQ/F3T9NT5H2MYJXGQ.SMALL.jpg alan.chatham Did you know?  You can make pencil drawings reactive to touch for use with your projects!  It's really easy, and gives you a lot of flexibility in making interfaces for whatever microcontroller project you're making. I put this together as part of my UnoJoy project, where we're using the Arduino ...
By: alan.chatham

Continue Reading »]]> Sat, 26 May 2012 02:19:03 PDT http://www.instructables.com/id/How-to-Make-a-Custom-Watch/
How to Fabricate a Custom Watch - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FUN/5FC0/H1YONL7G/FUN5FC0H1YONL7G.SQUARE2.jpg http://img.instructables.com/files/deriv/FUN/5FC0/H1YONL7G/FUN5FC0H1YONL7G.SQUARE.jpg http://img.instructables.com/files/deriv/FUN/5FC0/H1YONL7G/FUN5FC0H1YONL7G.SMALL.jpg williamyang87 This instructable will describe the process of making a custom watch. Overview: Watch Case - design 3D computer model - print plastic model via 3D printer - cast metal model of watch case via lost wax method - additional assembly Watch Face - design watch face - hand craft work - install pre-made m...
By: williamyang87

Continue Reading »]]> Sat, 26 May 2012 18:34:00 PDT http://www.instructables.com/id/Simple-CNC-Machine/
Simple CNC Machine - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SQUARE2.jpg http://img.instructables.com/files/deriv/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SQUARE.jpg http://img.instructables.com/files/deriv/FV7/XB81/GYVDJ2KA/FV7XB81GYVDJ2KA.SMALL.jpg hackitbuildit What I'm going to try and show you in this instructable is how to build a simple CNC machine. Now when I say Simple I mean you only require basic tools & materials to build the machine. The machine is made out of Sawn Timber, drawer sliders, nema 17 Stepper motors, a TB6560 Driver Controller Board...
By: hackitbuildit

Continue Reading »]]> Mon, 27 Feb 2012 13:51:21 PST http://www.instructables.com/id/My-First-Synth/
My First Synth - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FX1/RM1P/GY4ROTNU/FX1RM1PGY4ROTNU.SQUARE2.jpg http://img.instructables.com/files/deriv/FX1/RM1P/GY4ROTNU/FX1RM1PGY4ROTNU.SQUARE.jpg http://img.instructables.com/files/deriv/FX1/RM1P/GY4ROTNU/FX1RM1PGY4ROTNU.SMALL.jpg randofo The kid synth came about as I sat hunched over a tangled mess of synthesizer wires. My friend Oliver came over, assessed the situation, and said, "You know you have succeeded in making the world's most complicated children's toy." While my initial reaction was to grunt at him, and shoo him away, I l...
By: randofo

Continue Reading »]]> Fri, 25 May 2012 15:43:33 PDT http://www.instructables.com/id/CNC-Scissor-Chair-Plywood/
CNC Scissor Chair (Plywood) - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FBY/8Y8N/H2MYJRNH/FBY8Y8NH2MYJRNH.SQUARE2.jpg http://img.instructables.com/files/deriv/FBY/8Y8N/H2MYJRNH/FBY8Y8NH2MYJRNH.SQUARE.jpg http://img.instructables.com/files/deriv/FBY/8Y8N/H2MYJRNH/FBY8Y8NH2MYJRNH.SMALL.jpg pseaton CNC + plywood = furniture. Search instructables and you'll come up with over 47,000 results for "CNC furniture." But for the great majority of CNC machines -- the 2-1/2 axis CNC routers that can move only in X, Y, and Z (no tilting or rotating controllers) -- a very specific condition has come to be...
By: pseaton

Continue Reading »]]> Fri, 25 May 2012 11:38:41 PDT http://www.instructables.com/id/Hoffman-Apparatus-for-pure-hydrogen-gas/
Hoffman Apparatus for pure hydrogen gas - More DIY How To Projects]]> http://img.instructables.com/files/deriv/FFG/UJZ9/H2MYHA5I/FFGUJZ9H2MYHA5I.SQUARE2.jpg http://img.instructables.com/files/deriv/FFG/UJZ9/H2MYHA5I/FFGUJZ9H2MYHA5I.SQUARE.jpg http://img.instructables.com/files/deriv/FFG/UJZ9/H2MYHA5I/FFGUJZ9H2MYHA5I.SMALL.jpg squiggy2 I’m sick of hydrocarbons. There are way better gasses out there that do the same job. Did you know – the original engine by Rudolf Diesel was made to run on peanut oil, and the original T-model Ford was designed for ethanol fuel? Anyway, enough of that. Before I can think about alternative automobil...
By: squiggy2

Continue Reading »]]> Fri, 25 May 2012 06:30:27 PDT