http://www.instructables.com Sat, 18 May 2013 04:12:24 PDT BLOX v1.01 http://www.instructables.com/id/Mario-Mushroom-Softie/ http://www.instructables.com/files/deriv/FBT/1TDP/HEXSRV54/FBT1TDPHEXSRV54.SQUARE2.jpg http://www.instructables.com/files/deriv/FBT/1TDP/HEXSRV54/FBT1TDPHEXSRV54.SQUARE.jpg http://www.instructables.com/files/deriv/FBT/1TDP/HEXSRV54/FBT1TDPHEXSRV54.SMALL.jpg lucylollipop Want your very own mario world mushroom? Me too. All you'll need is a bit of red fleece, some white fleece, black felt, and plenty of stuffing. The fleece I used was from ikea blankets - much cheaper than buying it by the metre, but the colour range isn't as good. Enjoy!
By: lucylollipop

Continue Reading »]]> Sun, 31 Mar 2013 05:18:41 PDT http://www.instructables.com/id/Custom-NES-case-mod/ http://www.instructables.com/files/deriv/F5E/7J7F/HDYZ7YJE/F5E7J7FHDYZ7YJE.SQUARE2.jpg http://www.instructables.com/files/deriv/F5E/7J7F/HDYZ7YJE/F5E7J7FHDYZ7YJE.SQUARE.jpg http://www.instructables.com/files/deriv/F5E/7J7F/HDYZ7YJE/F5E7J7FHDYZ7YJE.SMALL.jpg djkurtz92 I’ve been a huge fan of Nintendo (NES) since it first came out in 1985. I’ve always kept a working NES around, and occasionally play. Killing time surfing on the interweb, and I discovered casemodding. I immediately loved the idea of doing a custom paint job, or maybe some changes to an NES console....
By: djkurtz92

Continue Reading »]]> Sun, 10 Mar 2013 13:03:26 PDT http://www.instructables.com/id/Make-your-own-Game-Boy-Android-Gamepad-1/ http://www.instructables.com/files/deriv/F2F/ZK34/HCLBWXXD/F2FZK34HCLBWXXD.SQUARE2.jpg http://www.instructables.com/files/deriv/F2F/ZK34/HCLBWXXD/F2FZK34HCLBWXXD.SQUARE.jpg http://www.instructables.com/files/deriv/F2F/ZK34/HCLBWXXD/F2FZK34HCLBWXXD.SMALL.jpg alpinedelta
By: alpinedelta

Continue Reading »]]> Mon, 4 Feb 2013 21:31:19 PST http://www.instructables.com/id/NES-CONTROLLER-USB-FLASHDRIVE/ http://www.instructables.com/files/deriv/FJ1/TVDW/HCJOG6TI/FJ1TVDWHCJOG6TI.SQUARE2.jpg http://www.instructables.com/files/deriv/FJ1/TVDW/HCJOG6TI/FJ1TVDWHCJOG6TI.SQUARE.jpg http://www.instructables.com/files/deriv/FJ1/TVDW/HCJOG6TI/FJ1TVDWHCJOG6TI.SMALL.jpg noah26040 This is a great if you love NES GAMES OR RETRO GAMES Step 1 Undo all the screws from the back Step 2 Remove the circuit board but leave all buttons in the remote  Step 3 get your USB and remove housing Step 4 put the usb into the empty nes controller with extension plugged into the usb & duct ta...
By: noah26040

Continue Reading »]]> Sat, 2 Feb 2013 00:51:35 PST http://www.instructables.com/id/Gameboy-Cartridge-USB/ http://www.instructables.com/files/deriv/FDT/XZGV/HAQ3AM60/FDTXZGVHAQ3AM60.SQUARE2.jpg http://www.instructables.com/files/deriv/FDT/XZGV/HAQ3AM60/FDTXZGVHAQ3AM60.SQUARE.jpg http://www.instructables.com/files/deriv/FDT/XZGV/HAQ3AM60/FDTXZGVHAQ3AM60.SMALL.jpg c3ralki1l3r This is an idea I had when one of my gameboy games broke( i know its old).  I will post an instructables one i can get my other gameboy cartridge open :D.
By: c3ralki1l3r

Continue Reading »]]> Wed, 2 Jan 2013 10:31:14 PST http://www.instructables.com/id/wireless-mouse-in-a-nes-gamepad-2/ http://www.instructables.com/files/deriv/FLX/A9GJ/HAFHKT5D/FLXA9GJHAFHKT5D.SQUARE2.jpg http://www.instructables.com/files/deriv/FLX/A9GJ/HAFHKT5D/FLXA9GJHAFHKT5D.SQUARE.jpg http://www.instructables.com/files/deriv/FLX/A9GJ/HAFHKT5D/FLXA9GJHAFHKT5D.SMALL.jpg champx after seeing a mouse based nes gamepad (create foam) I decide to do something similar wireless! the A and B button are click, the D-pad is the scrollwheel receiver is in the back
By: champx

Continue Reading »]]> Fri, 7 Dec 2012 13:52:58 PST http://www.instructables.com/id/half-size-Nintendo-arcade/ http://www.instructables.com/files/deriv/F6P/R9TG/H9T4IKQ2/F6PR9TGH9T4IKQ2.SQUARE2.jpg http://www.instructables.com/files/deriv/F6P/R9TG/H9T4IKQ2/F6PR9TGH9T4IKQ2.SQUARE.jpg http://www.instructables.com/files/deriv/F6P/R9TG/H9T4IKQ2/F6PR9TGH9T4IKQ2.SMALL.jpg BC_Jeffro 1/2 size arcade with a super Nintendo in it 
By: BC_Jeffro

Continue Reading »]]> Mon, 26 Nov 2012 23:49:34 PST http://www.instructables.com/id/rug-punched-Zelda-3-shield-rug/ http://www.instructables.com/files/deriv/FMR/YH7I/H9G10U67/FMRYH7IH9G10U67.SQUARE2.jpg http://www.instructables.com/files/deriv/FMR/YH7I/H9G10U67/FMRYH7IH9G10U67.SQUARE.jpg http://www.instructables.com/files/deriv/FMR/YH7I/H9G10U67/FMRYH7IH9G10U67.SMALL.jpg BunnieBard This is a 20x30" rug made with an old, traditional technique called "rug-punching". It is designed to look like the shield Link carries in the art for Zelda: Link to the Past and is super plush, like a thick shag carpet! All you need is a rug punch tool, cotton fabric, and some yarn in various colo...
By: BunnieBard

Continue Reading »]]> Mon, 19 Nov 2012 20:38:04 PST http://www.instructables.com/id/How-to-fix-a-PAL-Gamecubes-Brightness-problems/ http://www.instructables.com/files/deriv/FM6/W87V/H8FYOIM5/FM6W87VH8FYOIM5.SQUARE2.jpg http://www.instructables.com/files/deriv/FM6/W87V/H8FYOIM5/FM6W87VH8FYOIM5.SQUARE.jpg http://www.instructables.com/files/deriv/FM6/W87V/H8FYOIM5/FM6W87VH8FYOIM5.SMALL.gif Kai7os First time I'm doing an instructable so bare with me! So I've been having problems with my PAL Gamecube being to bright. I've used my Google-Fu to find a fix to it but I've only come across things related to other Nintendo consoles (N64 and SNES). From all the pieces I've gathered around the inte...
By: Kai7os

Continue Reading »]]> Thu, 18 Oct 2012 13:54:06 PDT http://www.instructables.com/id/Nintoaster-project-1/ http://www.instructables.com/files/deriv/FDX/T1JX/H4VQTAU7/FDXT1JXH4VQTAU7.SQUARE2.jpg http://www.instructables.com/files/deriv/FDX/T1JX/H4VQTAU7/FDXT1JXH4VQTAU7.SQUARE.jpg http://www.instructables.com/files/deriv/FDX/T1JX/H4VQTAU7/FDXT1JXH4VQTAU7.SMALL.jpg DoctorWoo This instructable is going to be a very loose ended one, so please bear with it. The reason for this is mainly to be a guide, not a step by step. The project was orgianlly posted by a youtube user by the name of vomitsaw. For this video tutorial on this, visit this link.  This may become more detail...
By: DoctorWoo

Continue Reading »]]> Thu, 26 Jul 2012 23:54:10 PDT http://www.instructables.com/id/Hang-Boo-on-a-wall-Boo-wall-piece/ http://www.instructables.com/files/deriv/FZ5/THJ3/H51AS8LR/FZ5THJ3H51AS8LR.SQUARE2.jpg http://www.instructables.com/files/deriv/FZ5/THJ3/H51AS8LR/FZ5THJ3H51AS8LR.SQUARE.jpg http://www.instructables.com/files/deriv/FZ5/THJ3/H51AS8LR/FZ5THJ3H51AS8LR.SMALL.jpg ynze Inspired by Dr.Duckhunts "Build Uka Uka wall piece" I made a glow-in-the-dark Boo wall piece, as a birthday gift for my stepson. -- This Photos Instructable is an entry in the Elemental LED contest. If you like it, please give it your vote. You can vote for as many I'bles as you want. Thanks! -- T...
By: ynze

Continue Reading »]]> Tue, 24 Jul 2012 13:19:13 PDT http://www.instructables.com/id/Pixel-Art-To-Perler-Beads/ http://www.instructables.com/files/deriv/FHN/0YI0/H4B2N7KY/FHN0YI0H4B2N7KY.SQUARE2.jpg http://www.instructables.com/files/deriv/FHN/0YI0/H4B2N7KY/FHN0YI0H4B2N7KY.SQUARE.jpg http://www.instructables.com/files/deriv/FHN/0YI0/H4B2N7KY/FHN0YI0H4B2N7KY.SMALL.jpg ArcadeGamer You might have always wanted to make video game character art. How? With this easy technique. You Will Need: Perler Beads Ironing Paper Iron Platform (to put the beads on) Step 1: Make the video game character you want from the perler beads. Step 2: Put the ironing paper on top the perler beads. S...
By: ArcadeGamer

Continue Reading »]]> Fri, 6 Jul 2012 18:43:21 PDT http://www.instructables.com/id/Gameboy-Perler-bead-Necklaces/ http://www.instructables.com/files/deriv/FHE/WF44/H3Z3KP1N/FHEWF44H3Z3KP1N.SQUARE2.jpg http://www.instructables.com/files/deriv/FHE/WF44/H3Z3KP1N/FHEWF44H3Z3KP1N.SQUARE.jpg http://www.instructables.com/files/deriv/FHE/WF44/H3Z3KP1N/FHEWF44H3Z3KP1N.SMALL.jpg pixel junkie I made these awesome chains out pf perler beads. Im starting to sell these so check out my website for more http://pixeljunkiedesigns.bigcartel.com
By: pixel junkie

Continue Reading »]]> Sun, 1 Jul 2012 11:44:36 PDT http://www.instructables.com/id/Custom-Painted-Super-Mario-World-Super-Nintendo/ http://www.instructables.com/files/deriv/FVJ/ERKJ/H3QFITHS/FVJERKJH3QFITHS.SQUARE2.jpg http://www.instructables.com/files/deriv/FVJ/ERKJ/H3QFITHS/FVJERKJH3QFITHS.SQUARE.jpg http://www.instructables.com/files/deriv/FVJ/ERKJ/H3QFITHS/FVJERKJH3QFITHS.SMALL.jpg kevamorris This just took shape because of boredom and a yellowing ugly SNES. The finished product is something that looks pretty cool. I Even did a bowser controller!
By: kevamorris

Continue Reading »]]> Wed, 20 Jun 2012 11:30:57 PDT http://www.instructables.com/id/Retraux-Mr-Game-Watch-Papercraft/ http://www.instructables.com/files/deriv/F0G/ITYD/H2WEVWZW/F0GITYDH2WEVWZW.SQUARE2.jpg http://www.instructables.com/files/deriv/F0G/ITYD/H2WEVWZW/F0GITYDH2WEVWZW.SQUARE.jpg http://www.instructables.com/files/deriv/F0G/ITYD/H2WEVWZW/F0GITYDH2WEVWZW.SMALL.jpg Whats a Paper Tiger Time to kick it old school! Here's a bit of Nintendo Trivia for you.  Before Mario saved Princess Peach, Donkey Kong threw his first barrel or even a blue line block cleared a TETRIS, there was another video game hero that made his impact.  Of course, we know him today as the iconic Mr. Game and W...
By: Whats a Paper Tiger

Continue Reading »]]> Mon, 4 Jun 2012 16:07:51 PDT http://www.instructables.com/id/Falling-Tetris-Papercraft/ http://www.instructables.com/files/deriv/FTQ/NQIQ/H2WET65S/FTQNQIQH2WET65S.SQUARE2.jpg http://www.instructables.com/files/deriv/FTQ/NQIQ/H2WET65S/FTQNQIQH2WET65S.SQUARE.jpg http://www.instructables.com/files/deriv/FTQ/NQIQ/H2WET65S/FTQNQIQH2WET65S.SMALL.jpg Whats a Paper Tiger "Duuun dun dun Duuuun, dun dun dun. Dun dun Duuun dun dun Duuun dun dun dun dun dun Dun Dun!" Created by Bryan at Paperfoldables.blogspot.com (an AWESOME papercrafting site, BTW) this papercraft brilliantly captures every gamer's favorite scene in Tetris.  Picture this: There you are racking up bl...
By: Whats a Paper Tiger

Continue Reading »]]> Mon, 4 Jun 2012 13:51:53 PDT http://www.instructables.com/id/NPC-Papercraft-Super-Mario-Galaxy-2/ http://cdn.instructables.com/FZZ/IZ3S/H2WEJMQZ/FZZIZ3SH2WEJMQZ.SQUARE2.jpg http://cdn.instructables.com/FZZ/IZ3S/H2WEJMQZ/FZZIZ3SH2WEJMQZ.SQUARE.jpg http://cdn.instructables.com/FZZ/IZ3S/H2WEJMQZ/FZZIZ3SH2WEJMQZ.SMALL.jpg Whats a Paper Tiger Created by Toodles on NintendoPapercraft.com, this adorable wooden character is an NPC (non playable character) from the video game Super Mario Galaxy 2. I have never beaten Super Mario Galaxy, honestly, so as far as any further description about what this character is I have no idea.  I assume they...
By: Whats a Paper Tiger

Continue Reading »]]> Mon, 4 Jun 2012 12:09:37 PDT http://www.instructables.com/id/Donkey-Kong-Cabinet-Papercraft/ http://www.instructables.com/files/deriv/F5T/CFJO/H2TJ4XPO/F5TCFJOH2TJ4XPO.SQUARE2.jpg http://www.instructables.com/files/deriv/F5T/CFJO/H2TJ4XPO/F5TCFJOH2TJ4XPO.SQUARE.jpg http://www.instructables.com/files/deriv/F5T/CFJO/H2TJ4XPO/F5TCFJOH2TJ4XPO.SMALL.jpg Whats a Paper Tiger Donkey Kong is awesome. But a real King of Kong-type cabinet can take up a lot of room (and a lot of quarters.) Try a three inch version instead. The barrels are less dangerous, the mustache is optional, and the ladders are extraneous. Here's how to do it: Materials: Paper, Printer, Ink Cartridges,...
By: Whats a Paper Tiger

Continue Reading »]]> Thu, 31 May 2012 22:59:19 PDT http://www.instructables.com/id/Big-Little-Metroid/ http://www.instructables.com/files/deriv/FEQ/3Q5H/GZUAFUB6/FEQ3Q5HGZUAFUB6.SQUARE2.jpg http://www.instructables.com/files/deriv/FEQ/3Q5H/GZUAFUB6/FEQ3Q5HGZUAFUB6.SQUARE.jpg http://www.instructables.com/files/deriv/FEQ/3Q5H/GZUAFUB6/FEQ3Q5HGZUAFUB6.SMALL.jpg HanakoHeals I'm a really big fan of retro games, so when I found a pattern for a metroid from the Metroid series, I had to make one.  The link for the pattern can be found here. I only made modifications to the 'leg'. I didn't want to crochet onto the metroid's body, so I worked the pattern backwards. I also ...
By: HanakoHeals

Continue Reading »]]> Mon, 19 Mar 2012 18:08:39 PDT http://www.instructables.com/id/Miniature-Skeeball/ http://www.instructables.com/files/deriv/FEQ/6LGK/GW3X8OPH/FEQ6LGKGW3X8OPH.SQUARE2.jpg http://www.instructables.com/files/deriv/FEQ/6LGK/GW3X8OPH/FEQ6LGKGW3X8OPH.SQUARE.jpg http://www.instructables.com/files/deriv/FEQ/6LGK/GW3X8OPH/FEQ6LGKGW3X8OPH.SMALL.jpg freeza36 I bought this Nintendo tin sometime last year. It contained gum, but that is now long gone. This is a really easy skeeball game that can fit in your pocket. I used a Home Depot "paint stirrer"  to make the bottom, and the inclined area at the end. I drilled some holes it it, and put down some duct t...
By: freeza36

Continue Reading »]]> Mon, 12 Dec 2011 20:10:38 PST http://www.instructables.com/id/Nintendo-DS-Union-Flag-decoration/ http://www.instructables.com/files/deriv/FN1/731I/GQ3FZPTF/FN1731IGQ3FZPTF.SQUARE2.jpg http://www.instructables.com/files/deriv/FN1/731I/GQ3FZPTF/FN1731IGQ3FZPTF.SQUARE.jpg http://www.instructables.com/files/deriv/FN1/731I/GQ3FZPTF/FN1731IGQ3FZPTF.SMALL.jpg TheInsaneFanboy Made from photo paper and red electrical tape. I've always wanted to do something like this. There's no cover over it... Would anyone know how to get a clear case for the original DS?
By: TheInsaneFanboy

Continue Reading »]]> Thu, 14 Jul 2011 14:24:40 PDT http://www.instructables.com/id/Clay-1-Up-Green-Mushroom-Figure/ http://www.instructables.com/files/deriv/F8F/7CGF/GQ22D5ZA/F8F7CGFGQ22D5ZA.SQUARE2.jpg http://www.instructables.com/files/deriv/F8F/7CGF/GQ22D5ZA/F8F7CGFGQ22D5ZA.SQUARE.jpg http://www.instructables.com/files/deriv/F8F/7CGF/GQ22D5ZA/F8F7CGFGQ22D5ZA.SMALL.jpg prosper58 A 1-Up green mushroom from the Mario games. It's made of Sculpey.
By: prosper58

Continue Reading »]]> Wed, 13 Jul 2011 17:33:25 PDT http://www.instructables.com/id/Clay-Bullet-Bill-Figure/ http://www.instructables.com/files/deriv/FC7/TNNK/GQ226PXC/FC7TNNKGQ226PXC.SQUARE2.jpg http://www.instructables.com/files/deriv/FC7/TNNK/GQ226PXC/FC7TNNKGQ226PXC.SQUARE.jpg http://www.instructables.com/files/deriv/FC7/TNNK/GQ226PXC/FC7TNNKGQ226PXC.SMALL.jpg prosper58 I made this a while back. It's Bullet Bill from the Mario games. It's made of Sculpey.
By: prosper58

Continue Reading »]]> Wed, 13 Jul 2011 17:32:34 PDT http://www.instructables.com/id/Clay-Heart-Piece-Figure/ http://www.instructables.com/files/deriv/FYW/LEBY/GQ226Q7B/FYWLEBYGQ226Q7B.SQUARE2.jpg http://www.instructables.com/files/deriv/FYW/LEBY/GQ226Q7B/FYWLEBYGQ226Q7B.SQUARE.jpg http://www.instructables.com/files/deriv/FYW/LEBY/GQ226Q7B/FYWLEBYGQ226Q7B.SMALL.jpg prosper58 A heart piece from my favorite series of video games- Zelda :D. It's made of Sculpey.
By: prosper58

Continue Reading »]]> Wed, 13 Jul 2011 17:31:39 PDT http://www.instructables.com/id/Clay-Bobomb-Figure/ http://www.instructables.com/files/deriv/FNS/9OBK/GQ22AJOB/FNS9OBKGQ22AJOB.SQUARE2.jpg http://www.instructables.com/files/deriv/FNS/9OBK/GQ22AJOB/FNS9OBKGQ22AJOB.SQUARE.jpg http://www.instructables.com/files/deriv/FNS/9OBK/GQ22AJOB/FNS9OBKGQ22AJOB.SMALL.jpg prosper58 It's a Bobomb from the Mario games. I forgot to put the key in its back when I made it. :P
By: prosper58

Continue Reading »]]> Wed, 13 Jul 2011 17:30:17 PDT http://www.instructables.com/id/polymer-clay-super-mario-figures/ http://www.instructables.com/files/deriv/FR5/H3ZL/GLAMQ8GH/FR5H3ZLGLAMQ8GH.SQUARE2.jpg http://www.instructables.com/files/deriv/FR5/H3ZL/GLAMQ8GH/FR5H3ZLGLAMQ8GH.SQUARE.jpg http://www.instructables.com/files/deriv/FR5/H3ZL/GLAMQ8GH/FR5H3ZLGLAMQ8GH.SMALL.jpg neetz these are super mario figures that i made.
By: neetz

Continue Reading »]]> Thu, 16 Jun 2011 21:54:49 PDT http://www.instructables.com/id/Old-School-Nintendo-Necklace/ http://www.instructables.com/files/deriv/F6N/RPW3/GMFIPYHX/F6NRPW3GMFIPYHX.SQUARE2.jpg http://www.instructables.com/files/deriv/F6N/RPW3/GMFIPYHX/F6NRPW3GMFIPYHX.SQUARE.jpg http://www.instructables.com/files/deriv/F6N/RPW3/GMFIPYHX/F6NRPW3GMFIPYHX.SMALL.jpg Black_Rose I made this Nintendo controller necklace, from the original Nintendo Entertainment System (NES), from perler beads. Its Stylish and retro!
By: Black_Rose

Continue Reading »]]> Tue, 12 Apr 2011 19:15:13 PDT http://www.instructables.com/id/Giant-Proportionate-Nintendo-DS/ http://www.instructables.com/files/deriv/F04/65SF/GLC26RME/F0465SFGLC26RME.SQUARE2.jpg http://www.instructables.com/files/deriv/F04/65SF/GLC26RME/F0465SFGLC26RME.SQUARE.jpg http://www.instructables.com/files/deriv/F04/65SF/GLC26RME/F0465SFGLC26RME.SMALL.jpg D00M99 In 5th grade math near the end of (I think) 2nd trimester we were learning about proportions. So for a end of trimester project our teacher had us choose an item, take measurements, and scale it up to a larger model, which we had to make. I decided to scale up my Nintendo DS. Yes, the original one...
By: D00M99

Continue Reading »]]> Fri, 1 Apr 2011 16:17:52 PDT http://www.instructables.com/id/Mario-Mushroom-Made-Out-Of-Clay/ http://www.instructables.com/files/deriv/FUU/LXGA/GLL506KF/FUULXGAGLL506KF.SQUARE2.jpg http://www.instructables.com/files/deriv/FUU/LXGA/GLL506KF/FUULXGAGLL506KF.SQUARE.jpg http://www.instructables.com/files/deriv/FUU/LXGA/GLL506KF/FUULXGAGLL506KF.SMALL.jpg Josrodr For a project i made a Mario mushroom out of clay. Things i used: Clay(duh...) Paint(for ceramics so it comes out vitreous) Sculpting tool And Kiln and tada! i made it all one piece, not two like most mushrooms
By: Josrodr

Continue Reading »]]> Tue, 29 Mar 2011 16:40:09 PDT http://www.instructables.com/id/Mario-Coin-Brick-Coin-Bank-1/ http://www.instructables.com/files/deriv/F2Q/KACF/GLJ7F7UV/F2QKACFGLJ7F7UV.SQUARE2.jpg http://www.instructables.com/files/deriv/F2Q/KACF/GLJ7F7UV/F2QKACFGLJ7F7UV.SQUARE.jpg http://www.instructables.com/files/deriv/F2Q/KACF/GLJ7F7UV/F2QKACFGLJ7F7UV.SMALL.jpg dailodai78 First project I've made for Instructables. It's an elegant Mario Coin Brick Bank. The measurement for this bank is 7" x 7" x 7". I made it 7 7 7 because the number 7 7 7 from the slot machines. If you get those numbers from the slot machines, you'd get a whole lot of coins. Well in this case, you d...
By: dailodai78

Continue Reading »]]> Fri, 25 Mar 2011 22:48:16 PDT http://www.instructables.com/id/Hand-carved-Deku-Shield-and-custom-painted-SNES-an/ http://www.instructables.com/files/deriv/FXF/N98Z/GLGCJCB2/FXFN98ZGLGCJCB2.SQUARE2.jpg http://www.instructables.com/files/deriv/FXF/N98Z/GLGCJCB2/FXFN98ZGLGCJCB2.SQUARE.jpg http://www.instructables.com/files/deriv/FXF/N98Z/GLGCJCB2/FXFN98ZGLGCJCB2.SMALL.jpg yahithappens1234 wooden deku shield was cut by machine but the symbol was hand carved with my pocket knife, lots of splinters and scrapes for that one. SNES is painted gold with a silver accent themed for zelda along with its zelda themed controller. Same goes for the N64 gold with silver accent and zelda themed co...
By: yahithappens1234

Continue Reading »]]> Sat, 19 Mar 2011 10:16:53 PDT http://www.instructables.com/id/Blooper-DS-light-Case/ http://www.instructables.com/files/deriv/FQQ/KS2T/GKS0RZ5Y/FQQKS2TGKS0RZ5Y.SQUARE2.jpg http://www.instructables.com/files/deriv/FQQ/KS2T/GKS0RZ5Y/FQQKS2TGKS0RZ5Y.SQUARE.jpg http://www.instructables.com/files/deriv/FQQ/KS2T/GKS0RZ5Y/FQQKS2TGKS0RZ5Y.SMALL.jpg The Gingham Ginger What better way to sport your DS light then with a Mario themed case. Holds 3 DS games as well!
By: The Gingham Ginger

Continue Reading »]]> Fri, 4 Mar 2011 16:29:19 PST http://www.instructables.com/id/How-to-make-a-Super-Mario-Mushroom/ http://cdn.instructables.com/FG7/IZDZ/GKKYXXCW/FG7IZDZGKKYXXCW.SQUARE2.jpg http://cdn.instructables.com/FG7/IZDZ/GKKYXXCW/FG7IZDZGKKYXXCW.SQUARE.jpg http://cdn.instructables.com/FG7/IZDZ/GKKYXXCW/FG7IZDZGKKYXXCW.SMALL.jpg Neon Panda Hey Everyone, I made this cute Super Mario Mushroom out of Polymer clay (I used Fimo) He was very easy to make although I do recommend some experience in polymer clay. You can make him into charm to go on your phone or bag, make him into a necklace, charm bracelet- anything you like, it would make ...
By: Neon Panda

Continue Reading »]]> Fri, 25 Feb 2011 03:16:06 PST http://www.instructables.com/id/Click-Stylus/ http://www.instructables.com/files/deriv/F4K/7X9Z/G8CBXZ6E/F4K7X9ZG8CBXZ6E.SQUARE2.jpg http://www.instructables.com/files/deriv/F4K/7X9Z/G8CBXZ6E/F4K7X9ZG8CBXZ6E.SQUARE.jpg http://www.instructables.com/files/deriv/F4K/7X9Z/G8CBXZ6E/F4K7X9ZG8CBXZ6E.SMALL.jpg MetroidMan347  This something I made over the course of about three days. There a few things I could've done a lot better, but I had other plans for this pen before I made it into a click stylus so, I had glued the part that screws apart together with hot glue. Yeah, not a good plan of action, the instructable fo...
By: MetroidMan347

Continue Reading »]]> Sat, 24 Apr 2010 05:56:08 PDT http://www.instructables.com/id/NES-duct-tape-cover/ http://www.instructables.com/files/deriv/FYO/8CLB/G2HDW8GW/FYO8CLBG2HDW8GW.SQUARE2.jpg http://www.instructables.com/files/deriv/FYO/8CLB/G2HDW8GW/FYO8CLBG2HDW8GW.SQUARE.jpg http://www.instructables.com/files/deriv/FYO/8CLB/G2HDW8GW/FYO8CLBG2HDW8GW.SMALL.jpg Iridium7  
By: Iridium7

Continue Reading »]]> Fri, 27 Nov 2009 09:19:07 PST http://www.instructables.com/id/Mac-Mini-Inside-of-a-NES/ http://www.instructables.com/files/deriv/F04/E1RT/FVW22FY2/F04E1RTFVW22FY2.SQUARE2.jpg http://www.instructables.com/files/deriv/F04/E1RT/FVW22FY2/F04E1RTFVW22FY2.SQUARE.jpg http://www.instructables.com/files/deriv/F04/E1RT/FVW22FY2/F04E1RTFVW22FY2.SMALL.jpg alpinedelta I did this project a couple years back and gathered some pretty positive response. So much, in fact, it took down my friend Brent's website (where I was hosting the pictures). I thought that I would submit the photos here, which may benefit others in making one. I've been meaning to do up an instruc...
By: alpinedelta

Continue Reading »]]> Mon, 15 Jun 2009 20:29:19 PDT http://www.instructables.com/id/My-Ds-Arcade-Stand-1/ http://www.instructables.com/files/deriv/FZV/KOJF/FQWVVDM2/FZVKOJFFQWVVDM2.SQUARE2.jpg http://www.instructables.com/files/deriv/FZV/KOJF/FQWVVDM2/FZVKOJFFQWVVDM2.SQUARE.jpg http://www.instructables.com/files/deriv/FZV/KOJF/FQWVVDM2/FZVKOJFFQWVVDM2.SMALL.jpg wthimnothere well it alittle crappy but who care it only for shooting games..I made it out of cardboard tape and a ds also this is my frist instructable so no bad comments please.
By: wthimnothere

Continue Reading »]]> Sat, 14 Feb 2009 05:05:00 PST http://www.instructables.com/id/Semi-Portable-NES/ http://www.instructables.com/files/deriv/FHC/5IXE/FQR1WQTX/FHC5IXEFQR1WQTX.SQUARE2.jpg http://www.instructables.com/files/deriv/FHC/5IXE/FQR1WQTX/FHC5IXEFQR1WQTX.SQUARE.jpg http://www.instructables.com/files/deriv/FHC/5IXE/FQR1WQTX/FHC5IXEFQR1WQTX.SMALL.jpg chief tyrol After reading 1-ups guide on on to make a portable nes (http://www.instructables.com/id/How_to_Make_a_Portable_Game_System/), I was inspired to make my own.However, I still wanted to be able to play it on the TV. So my solution was to instead of making a fully portable nes, I simply fit it into a c...
By: chief tyrol

Continue Reading »]]> Thu, 5 Feb 2009 22:13:02 PST http://www.instructables.com/id/Lego-tape-dispencer/ http://cdn.instructables.com/FAF/IOTM/FQJ6DPM0/FAFIOTMFQJ6DPM0.SQUARE2.jpg http://cdn.instructables.com/FAF/IOTM/FQJ6DPM0/FAFIOTMFQJ6DPM0.SQUARE.jpg http://cdn.instructables.com/FAF/IOTM/FQJ6DPM0/FAFIOTMFQJ6DPM0.SMALL.jpg amakerguy Here is the lego tape dispenser I made. You can make it to from coolblades instructable Lego working tape dispenser.
By: amakerguy

Continue Reading »]]> Thu, 29 Jan 2009 14:22:23 PST http://www.instructables.com/id/my-ds-arcade-stand/ http://www.instructables.com/files/deriv/F7C/PM87/FP8NLFKF/F7CPM87FP8NLFKF.SQUARE2.jpg http://www.instructables.com/files/deriv/F7C/PM87/FP8NLFKF/F7CPM87FP8NLFKF.SQUARE.jpg http://www.instructables.com/files/deriv/F7C/PM87/FP8NLFKF/F7CPM87FP8NLFKF.SMALL.jpg peach_fart a few months ago i made a ds arcade stand with the original packaging. you should probably be able to make yourself. if you kept the box, that is.
By: peach_fart

Continue Reading »]]> Mon, 29 Dec 2008 13:11:32 PST http://www.instructables.com/id/Mario-Galaxy-Hidden-Phrase-1/ http://www.instructables.com/files/deriv/F4L/NO30/FOVX12ES/F4LNO30FOVX12ES.SQUARE2.jpg http://www.instructables.com/files/deriv/F4L/NO30/FOVX12ES/F4LNO30FOVX12ES.SQUARE.jpg http://www.instructables.com/files/deriv/F4L/NO30/FOVX12ES/F4LNO30FOVX12ES.SMALL.jpg tudgeanator To find the hidden phrase in mario galaxy read every letter with a star/twinkle in the bottom corner!
By: tudgeanator

Continue Reading »]]> Mon, 22 Dec 2008 00:15:28 PST http://www.instructables.com/id/My-Nintendo-DS-Lite-arcade-stand/ http://www.instructables.com/files/deriv/FTJ/ZM0M/FLI8MRU9/FTJZM0MFLI8MRU9.SQUARE2.jpg http://www.instructables.com/files/deriv/FTJ/ZM0M/FLI8MRU9/FTJZM0MFLI8MRU9.SQUARE.jpg http://www.instructables.com/files/deriv/FTJ/ZM0M/FLI8MRU9/FTJZM0MFLI8MRU9.SMALL.jpg ThEoNeS My Portal themed WIP Nintendo DS Lite arcade stand. THE CAKE IS A PIE! THE PIE IS A LIE! THE BROWNIE IS GOOD!
By: ThEoNeS

Continue Reading »]]> Wed, 24 Sep 2008 17:57:39 PDT http://www.instructables.com/id/Nintendo-DS-Lite-Arcade-Stand-1/ http://www.instructables.com/files/deriv/FQO/HM4D/FJIVO58J/FQOHM4DFJIVO58J.SQUARE2.jpg http://www.instructables.com/files/deriv/FQO/HM4D/FJIVO58J/FQOHM4DFJIVO58J.SQUARE.jpg http://www.instructables.com/files/deriv/FQO/HM4D/FJIVO58J/FQOHM4DFJIVO58J.SMALL.jpg chel_cee Got the idea from this site by different users and decided to make one myself.
By: chel_cee

Continue Reading »]]> Tue, 5 Aug 2008 18:01:30 PDT