Instructables: exploring - photos - workshop - cars http://www.instructables.com Wed, 16 Apr 2014 09:39:03 PDT BLOX v1.01 Installing a TS 6-position Tuner for your 99'-01' PowerStroke Excursion...2hrs flat! http://www.instructables.com/id/Installing-a-TS-6-position-Tuner-for-your-99-01-Po/ http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SQUARE2.jpg http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SQUARE.jpg http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SMALL.jpg Rapturee Hello, here is my first instructable so bare with me. I hope this helps someone else have a lot less issues then i had. My family and i are MPG snobs to put short. We Trike nearly everywhere, when possible on our Recumbent Trikes. When petroleum transportation is necessary we have chosen to go with...
By: Rapturee

Continue Reading »]]>
Thu, 6 Mar 2014 21:45:53 PST
$30 Fiero Paint Job http://www.instructables.com/id/30-Fiero-Paint-Job/ http://cdn.instructables.com/FHC/QV21/HRPBKCNN/FHCQV21HRPBKCNN.SQUARE2.jpg http://cdn.instructables.com/FHC/QV21/HRPBKCNN/FHCQV21HRPBKCNN.SQUARE.jpg http://cdn.instructables.com/FHC/QV21/HRPBKCNN/FHCQV21HRPBKCNN.SMALL.jpg rjkorn I picked up this Fiero pretty cheap but it needed a windshield and plenty of bodywork. The A pillars were damaged from the tree that broke the windshield. After a couple of weeks and some fiberglass and Bondo I had it smooth but it needed some paint. I had read many articles about roller paint ...
By: rjkorn

Continue Reading »]]>
Sun, 16 Feb 2014 14:05:51 PST
Install Scion FR-S OEM Fog Light Kit http://www.instructables.com/id/Install-Scion-FR-S-OEM-Fog-Light-Kit/ http://cdn.instructables.com/FRL/T0P3/HQRO22D7/FRLT0P3HQRO22D7.SQUARE2.jpg http://cdn.instructables.com/FRL/T0P3/HQRO22D7/FRLT0P3HQRO22D7.SQUARE.jpg http://cdn.instructables.com/FRL/T0P3/HQRO22D7/FRLT0P3HQRO22D7.SMALL.jpg ilovejdmtoy For the US model Scion FR-S, there is no fog lights, before of this, adding fog lights become a priority for FR-S drivers who are looking for a Genuine JDM look. Below we will show you a step by step guide on how to get your Scion FRS OEM fog light kit. 1.) Using a trim removal tool or any flat pla...
By: ilovejdmtoy

Continue Reading »]]>
Thu, 23 Jan 2014 17:09:36 PST
DIY windshield washer system liquid http://www.instructables.com/id/DIY-windshield-washer-system-liquid/ http://cdn.instructables.com/FPX/K76M/HQOJJIKC/FPXK76MHQOJJIKC.SQUARE2.jpg http://cdn.instructables.com/FPX/K76M/HQOJJIKC/FPXK76MHQOJJIKC.SQUARE.jpg http://cdn.instructables.com/FPX/K76M/HQOJJIKC/FPXK76MHQOJJIKC.SMALL.jpg BUFF Sandblast Technology This is how to make your own windshield washer system liquid instead of buying it expencively. You'll need: ethyl alcohol dish liquid water a big measuring jug big enough to contain the amount you want to produce Now let's go: 1. First you have to calculate how much ethyl alcohol you need. For th...
By: BUFF Sandblast Technology

Continue Reading »]]>
Tue, 21 Jan 2014 01:51:19 PST
Fix/replace battery in Dodge/Chrysler rechargeable/built-in flashlight http://www.instructables.com/id/Fixreplace-battery-in-DodgeChrysler-rechargeablebu/ http://cdn.instructables.com/FY3/KKVF/HQAWYHBU/FY3KKVFHQAWYHBU.SQUARE2.jpg http://cdn.instructables.com/FY3/KKVF/HQAWYHBU/FY3KKVFHQAWYHBU.SQUARE.jpg http://cdn.instructables.com/FY3/KKVF/HQAWYHBU/FY3KKVFHQAWYHBU.SMALL.jpg jweidner1 If you own a late model Chrysler made vehicle with the rechargeable flashlight and you use it regularly, your flashlight may, like mine, barely illuminate or stop working altogether.  Well, the battery is replaceable.  You can pry open the case and slide it right out.  The battery (pictured above) i...
By: jweidner1

Continue Reading »]]>
Sat, 11 Jan 2014 07:51:55 PST
lowering suspension project(Arduino) http://www.instructables.com/id/lowering-suspension-projectArduino/ http://cdn.instructables.com/FLR/G584/HQ72ZG65/FLRG584HQ72ZG65.SQUARE2.jpg http://cdn.instructables.com/FLR/G584/HQ72ZG65/FLRG584HQ72ZG65.SQUARE.jpg http://cdn.instructables.com/FLR/G584/HQ72ZG65/FLRG584HQ72ZG65.SMALL.jpg rrider2 http://www.youtube.com/watch?v=Jg5-kPuDQrg This is my first project with arduino, the idea is to fill a bag of air and control its height from the floor, this is a project and can be deployed on larger scale, let's just follow the wiring diagram and transfer code for the Arduino: components: ...
By: rrider2

Continue Reading »]]>
Wed, 8 Jan 2014 13:33:06 PST
Install Scion FR-S Subaru BRZ LED Side Markers http://www.instructables.com/id/Install-Scion-FR-S-Subaru-BRZ-LED-Side-Markers/ http://cdn.instructables.com/FPY/6SO6/HQ6XO3WC/FPY6SO6HQ6XO3WC.SQUARE2.jpg http://cdn.instructables.com/FPY/6SO6/HQ6XO3WC/FPY6SO6HQ6XO3WC.SQUARE.jpg http://cdn.instructables.com/FPY/6SO6/HQ6XO3WC/FPY6SO6HQ6XO3WC.SMALL.jpg ilovejdmtoy Since the release of the new Toyota 86, it has been a top seller within the US. The vehicle is affordable, stylish and most importantly sporty. The Scion FR-S has all the basic for a true car enthusiast to build off of. In just a year, you can see hundreds of owners modifying the Toyota 86 with body...
By: ilovejdmtoy

Continue Reading »]]>
Wed, 8 Jan 2014 10:52:44 PST
security alarm http://www.instructables.com/id/security-alarm/ http://cdn.instructables.com/F9S/4QPK/HQ6DKMAD/F9S4QPKHQ6DKMAD.SQUARE2.jpg http://cdn.instructables.com/F9S/4QPK/HQ6DKMAD/F9S4QPKHQ6DKMAD.SQUARE.jpg http://cdn.instructables.com/F9S/4QPK/HQ6DKMAD/F9S4QPKHQ6DKMAD.SMALL.jpg dhruv337 make the switch with the help of cloth pin by taking them apart. drill them at top so that we can crimp the wire with ring terminal.then fold the ring terminals at 90 degree angle.Make sure that after joining the cloth pin they should touch each other. keep the switch apart. Attach the wires to the...
By: dhruv337

Continue Reading »]]>
Wed, 8 Jan 2014 04:20:43 PST
custom air valve ( bike, car, anything ! ) DIY http://www.instructables.com/id/DIY-custom-air-valve-bike-car-anything-/ http://cdn.instructables.com/FVQ/O844/HPWMMGBQ/FVQO844HPWMMGBQ.SQUARE2.jpg http://cdn.instructables.com/FVQ/O844/HPWMMGBQ/FVQO844HPWMMGBQ.SQUARE.jpg http://cdn.instructables.com/FVQ/O844/HPWMMGBQ/FVQO844HPWMMGBQ.SMALL.jpg Carl k8 Hello guys , in this instructable we're going to do a custome air valve ! we need : - 2 bouncy balls ( crazy balls ) - something to drill with ( screw driver ) - super glue ( + gloves ,so it doesn't stick on ur hands ) How to do : First, we're going to drill the bouncy ball with something ( i used...
By: Carl k8

Continue Reading »]]>
Fri, 3 Jan 2014 11:02:33 PST
Exhaust Flame Thrower Kit For Car or Bike http://www.instructables.com/id/Exhaust-Flame-Thrower-Kit-For-Car-or-Bike/ http://cdn.instructables.com/FGC/Y5H0/HPN4LC9O/FGCY5H0HPN4LC9O.SQUARE2.jpg http://cdn.instructables.com/FGC/Y5H0/HPN4LC9O/FGCY5H0HPN4LC9O.SQUARE.jpg http://cdn.instructables.com/FGC/Y5H0/HPN4LC9O/FGCY5H0HPN4LC9O.SMALL.jpg slwthr I Just wanted to make a flame through my car exhaust...These happens in modified rides like Mitsubishi evo Subaru and any car with Antilag system. But unfortunately we cannot do with this with our standard car.If we do some modification like antilag system we have to spend expensive money. So I Mad...
By: slwthr

Continue Reading »]]>
Wed, 25 Dec 2013 23:14:47 PST
How to Install LED Interior Lights For a BMW E60 5-Series http://www.instructables.com/id/How-to-Install-LED-Interior-Lights-For-a-BMW-E60-5/ http://cdn.instructables.com/FU4/4DKE/HPAOZ3XH/FU44DKEHPAOZ3XH.SQUARE2.jpg http://cdn.instructables.com/FU4/4DKE/HPAOZ3XH/FU44DKEHPAOZ3XH.SQUARE.jpg http://cdn.instructables.com/FU4/4DKE/HPAOZ3XH/FU44DKEHPAOZ3XH.SMALL.jpg ilovejdmtoy The E60 5-Series is a mid-sized executive car created by BMW; this sixth generation model is the brands second best-selling vehicle behind the 3-Series. Like most mid-sized luxury vehicles, there is ample space for passengers inside the cabin which requires for an equal amount of lighting for the pa...
By: ilovejdmtoy

Continue Reading »]]>
Tue, 17 Dec 2013 10:58:16 PST
Technical service of carprog full v4.01 http://www.instructables.com/id/Technical-service-of-carprog-full-v401/ http://cdn.instructables.com/F5S/E92D/HOUG53K9/F5SE92DHOUG53K9.SQUARE2.jpg http://cdn.instructables.com/F5S/E92D/HOUG53K9/F5SE92DHOUG53K9.SQUARE.jpg http://cdn.instructables.com/F5S/E92D/HOUG53K9/F5SE92DHOUG53K9.SMALL.jpg x431shop Technical service of carprog full v4.01 When you encounter this problem, how to do? carprog full v4.01-01 If you have this problem, you need to send back the main hareware for repair. It is the customer mistake to cause this problem, please don't update the software online, don't use other's softw...
By: x431shop

Continue Reading »]]>
Wed, 4 Dec 2013 11:32:24 PST
2 Barrel (2-5/8" neck) Carburetor to Air Cleaner Spacer for HEI Upgrade http://www.instructables.com/id/2-Barrel-2-58-neck-Carburetor-to-Air-Cleaner-Space/ http://cdn.instructables.com/F5C/P6DP/HOHYMJGH/F5CP6DPHOHYMJGH.SQUARE2.jpg http://cdn.instructables.com/F5C/P6DP/HOHYMJGH/F5CP6DPHOHYMJGH.SQUARE.jpg http://cdn.instructables.com/F5C/P6DP/HOHYMJGH/F5CP6DPHOHYMJGH.SMALL.jpg justmakeme! I replaced the points ignition with an HEI setup in my 1967 Chevy Truck. The larger-cap HEI interferes with the stock flat-bottom air cleaner, which also lacks the 'dent' in it that the later, HEI-equipped vehicles had. Most carb spacers and risers are made from  ABS, phenolic resin,  hardwoods, ...
By: justmakeme!

Continue Reading »]]>
Tue, 3 Dec 2013 11:48:19 PST
extend high pressure washer cord lifetime http://www.instructables.com/id/extend-high-pressure-washer-cord-lifetime/ http://cdn.instructables.com/FOU/YB41/HMMF5C5P/FOUYB41HMMF5C5P.SQUARE2.jpg http://cdn.instructables.com/FOU/YB41/HMMF5C5P/FOUYB41HMMF5C5P.SQUARE.jpg http://cdn.instructables.com/FOU/YB41/HMMF5C5P/FOUYB41HMMF5C5P.SMALL.jpg smokky toppy .. My problem is my High pressure washer cord is leak easily. when it scratch with the floor. So i got an idea by wrap it with Electrical cord cover .. 
By: smokky toppy

Continue Reading »]]>
Sat, 12 Oct 2013 14:26:24 PDT
Make Your Own LED Light Bulb Tester From 9V Battery! http://www.instructables.com/id/Make-Your-Own-LED-Light-Bulb-Tester-From-9V-Batter/ http://cdn.instructables.com/FRR/UB96/HMMF80QK/FRRUB96HMMF80QK.SQUARE2.jpg http://cdn.instructables.com/FRR/UB96/HMMF80QK/FRRUB96HMMF80QK.SQUARE.jpg http://cdn.instructables.com/FRR/UB96/HMMF80QK/FRRUB96HMMF80QK.SMALL.jpg ilovejdmtoy When I buy LED lights online, I always want to make sure that they work before I go through the long and tiring process of installing the lights. Installing LED lights only to find out they don’t work would be such a annoying thing so to prevent that, I decided to make a tester out of a 9V battery I...
By: ilovejdmtoy

Continue Reading »]]>
Fri, 11 Oct 2013 14:19:21 PDT
Dodge Neon won't shift into reverse http://www.instructables.com/id/Dodge-Neon-wont-shift-into-reverse/ http://cdn.instructables.com/F9B/ZZ3M/HM8CXITG/F9BZZ3MHM8CXITG.SQUARE2.jpg http://cdn.instructables.com/F9B/ZZ3M/HM8CXITG/F9BZZ3MHM8CXITG.SQUARE.jpg http://cdn.instructables.com/F9B/ZZ3M/HM8CXITG/F9BZZ3MHM8CXITG.SMALL.jpg 0Troy Have you moved to a new climate? Do you have shifting problems on hot days? Are certain gears getting harder to shift into? Then your transmission cables may have stretched! Once you take the center console shell off (four screws inside the center console, one in each cup holder), you can play wi...
By: 0Troy

Continue Reading »]]>
Mon, 7 Oct 2013 07:25:39 PDT
Vehicle headlight reminder http://www.instructables.com/id/Vehicle-headlight-reminder/ http://cdn.instructables.com/FUR/8UPD/HLZRXN8B/FUR8UPDHLZRXN8B.SQUARE2.jpg http://cdn.instructables.com/FUR/8UPD/HLZRXN8B/FUR8UPDHLZRXN8B.SQUARE.jpg http://cdn.instructables.com/FUR/8UPD/HLZRXN8B/FUR8UPDHLZRXN8B.SMALL.jpg graydog111 This is a wiring diagram for a headlight reminder to tell you that you have left your lights on when you turn your ignition switch off.  It costs less than $10.00,  is easy to make, and very effective.  It requires an automotive relay, readily available at automotive supply stores and a 12 volt pezi...
By: graydog111

Continue Reading »]]>
Sun, 29 Sep 2013 09:14:03 PDT
How to Install Projector Headlights on the Acura Integra 1994 - 2001 http://www.instructables.com/id/How-to-Install-Projector-Headlights-on-the-Acura-I/ http://cdn.instructables.com/FI9/12QB/HLSHI8M8/FI912QBHLSHI8M8.SQUARE2.jpg http://cdn.instructables.com/FI9/12QB/HLSHI8M8/FI912QBHLSHI8M8.SQUARE.jpg http://cdn.instructables.com/FI9/12QB/HLSHI8M8/FI912QBHLSHI8M8.SMALL.jpg Rvinyl Halo and projector headlights are a great way to upgrade your 1994 through 2001 Acura Integra (although this span covers two models the procedure shown below is exactly the same). Installation time should be around 30 to 45 minutes from start to finish so be sure to give yourself enough time uninter...
By: Rvinyl

Continue Reading »]]>
Fri, 20 Sep 2013 08:41:19 PDT
DIY Hood Ornament http://www.instructables.com/id/DIY-Hood-Ornament-1/ http://cdn.instructables.com/FUC/0N9Z/HLJVDWHF/FUC0N9ZHLJVDWHF.SQUARE2.jpg http://cdn.instructables.com/FUC/0N9Z/HLJVDWHF/FUC0N9ZHLJVDWHF.SQUARE.jpg http://cdn.instructables.com/FUC/0N9Z/HLJVDWHF/FUC0N9ZHLJVDWHF.SMALL.jpg Silvergoth My hood ornaments are nowhere near as fancy as some of the other that I have seen posted here and elsewhere. The Flash, on the Red Volvo station wagon, is a cheap plastic rolling figurine that I broke the wheels off of and stuck on with double-sided foam tape. The flames on either side of him are m...
By: Silvergoth

Continue Reading »]]>
Sat, 14 Sep 2013 20:14:13 PDT
Scion FR-S or Subaru BRZ 3rd LED Brake Light DIY Guide http://www.instructables.com/id/Scion-FR-S-or-Subaru-BRZ-3rd-LED-Brake-Light-DIY-G/ http://cdn.instructables.com/FH9/MV5S/HLFC0AYS/FH9MV5SHLFC0AYS.SQUARE2.jpg http://cdn.instructables.com/FH9/MV5S/HLFC0AYS/FH9MV5SHLFC0AYS.SQUARE.jpg http://cdn.instructables.com/FH9/MV5S/HLFC0AYS/FH9MV5SHLFC0AYS.SMALL.jpg ilovejdmtoy *Please keep in mind that this DIY guide will require modification to the original and aftermarket components. Please proceed at your own risk, iJDMTOY is not responsible for any damage or harm that can occur due to installation* This installation guide is base on a 2013 Scion FR-S 3rd LED Brake Li...
By: ilovejdmtoy

Continue Reading »]]>
Tue, 10 Sep 2013 12:25:11 PDT
Ford F-150 New Muffler Installation http://www.instructables.com/id/Ford-F-150-New-Muffler-Installation/ http://cdn.instructables.com/FGU/F57I/HLBR5I1V/FGUF57IHLBR5I1V.SQUARE2.jpg http://cdn.instructables.com/FGU/F57I/HLBR5I1V/FGUF57IHLBR5I1V.SQUARE.jpg http://cdn.instructables.com/FGU/F57I/HLBR5I1V/FGUF57IHLBR5I1V.SMALL.jpg earlcibiades Here's a brief explanation of how I installed a new muffler on a Ford F-150.  I'm certainly not a mechanic but it sounds great now and it's sturdy. 1) Photo 1 - old muffler was badly rust-damaged.  The support hanger was also rusted through.  (The replacement hanger was not available at the auto st...
By: earlcibiades

Continue Reading »]]>
Sun, 8 Sep 2013 20:53:30 PDT
How To Install Scion FR-S LED Daytime Running Lights http://www.instructables.com/id/How-To-Install-Scion-FR-S-LED-Daytime-Running-Ligh/ http://cdn.instructables.com/FLZ/BMNJ/HKZ9IIM6/FLZBMNJHKZ9IIM6.SQUARE2.jpg http://cdn.instructables.com/FLZ/BMNJ/HKZ9IIM6/FLZBMNJHKZ9IIM6.SQUARE.jpg http://cdn.instructables.com/FLZ/BMNJ/HKZ9IIM6/FLZBMNJHKZ9IIM6.SMALL.jpg ilovejdmtoy With the recent arrival of the Toyota 86 or as how it is known here in the states, the Scion FR-S, it has been at the center of the aftermarket world. Unfortunately, for the car enthusiasts like us in the United States, we normally don’t get the same options and features that the original Japanese v...
By: ilovejdmtoy

Continue Reading »]]>
Fri, 30 Aug 2013 17:00:57 PDT
roof rack http://www.instructables.com/id/roof-rack-2008/ http://cdn.instructables.com/FLD/6NFZ/HKVLKE4Q/FLD6NFZHKVLKE4Q.SQUARE2.jpg http://cdn.instructables.com/FLD/6NFZ/HKVLKE4Q/FLD6NFZHKVLKE4Q.SQUARE.jpg http://cdn.instructables.com/FLD/6NFZ/HKVLKE4Q/FLD6NFZHKVLKE4Q.SMALL.jpg forapp Object: Wanted to make inexpensive roof rack.  Discovered the factory rails were triangular without any channels.  This worried me at first but helped force a design that is possible for use with many different rails/vehicles. A)  materials:  J channel from the electrical section of your local har...
By: forapp

Continue Reading »]]>
Thu, 29 Aug 2013 21:56:01 PDT
Truck Roof Amber Lights http://www.instructables.com/id/Truck-Roof-Amber-Lights/ http://cdn.instructables.com/FJQ/8QA1/HKDFFW4C/FJQ8QA1HKDFFW4C.SQUARE2.jpg http://cdn.instructables.com/FJQ/8QA1/HKDFFW4C/FJQ8QA1HKDFFW4C.SQUARE.jpg http://cdn.instructables.com/FJQ/8QA1/HKDFFW4C/FJQ8QA1HKDFFW4C.SMALL.jpg boraciner Hi everyone,  I just bought a recon roof lights for my truck then me and my father worked a little hard to adjust these 5 lights to the roof of the truck. These dimensions are in millimeters. there are three holes for every lights.
By: boraciner

Continue Reading »]]>
Thu, 15 Aug 2013 09:13:54 PDT
DiY Custom Fit Car SunShade http://www.instructables.com/id/DiY-Custom-Fit-Car-SunShade/ http://cdn.instructables.com/FXF/7DJB/HJKC4Z7B/FXF7DJBHJKC4Z7B.SQUARE2.jpg http://cdn.instructables.com/FXF/7DJB/HJKC4Z7B/FXF7DJBHJKC4Z7B.SQUARE.jpg http://cdn.instructables.com/FXF/7DJB/HJKC4Z7B/FXF7DJBHJKC4Z7B.SMALL.jpg Diy_master DiY Custom Fit Car SunShade for rear window. Mesh cost arround 3€/m Steel wire, diameter 2mm, 0.50€ for 3m I forgot to paint wire with black spray
By: Diy_master

Continue Reading »]]>
Mon, 29 Jul 2013 23:33:33 PDT
Custom Radio Flyer for Swap Meets http://www.instructables.com/id/Custom-Radio-Flyer-for-Swap-Meets/ http://cdn.instructables.com/FCJ/9QBU/HIXPVTHR/FCJ9QBUHIXPVTHR.SQUARE2.jpg http://cdn.instructables.com/FCJ/9QBU/HIXPVTHR/FCJ9QBUHIXPVTHR.SQUARE.jpg http://cdn.instructables.com/FCJ/9QBU/HIXPVTHR/FCJ9QBUHIXPVTHR.SMALL.jpg gerrits13 Built this on a dolly frame and attached a wagon shell to it.
By: gerrits13

Continue Reading »]]>
Tue, 9 Jul 2013 17:07:48 PDT
How I fixed my 1990 BMW marker light http://www.instructables.com/id/How-I-fixed-my-1990-BMW-marker-light/ http://cdn.instructables.com/F63/XSZL/HI3TRIXF/F63XSZLHI3TRIXF.SQUARE2.jpg http://cdn.instructables.com/F63/XSZL/HI3TRIXF/F63XSZLHI3TRIXF.SQUARE.jpg http://cdn.instructables.com/F63/XSZL/HI3TRIXF/F63XSZLHI3TRIXF.SMALL.jpg steampsycho I broke the clip slot on the driver's side marker light of Isis (my 1990 BMW 325is), and I didn't want to buy a whole new assembly ($32+ shipping). So, I modeled the broken portion of the assembly from the passengers side clip (which is still in tact) and 3D printed it. I removed both assemblies, a...
By: steampsycho

Continue Reading »]]>
Mon, 1 Jul 2013 19:49:22 PDT
The absolute easiest way to double your remote unlock's range for your vehicle http://www.instructables.com/id/The-absolute-easiest-way-to-double-your-remote-unl/ http://cdn.instructables.com/F43/2PZL/HIEV1SXR/F432PZLHIEV1SXR.SQUARE2.jpg http://cdn.instructables.com/F43/2PZL/HIEV1SXR/F432PZLHIEV1SXR.SQUARE.jpg http://cdn.instructables.com/F43/2PZL/HIEV1SXR/F432PZLHIEV1SXR.SMALL.jpg donovan2themax5 This is one of the techniques that use every day. all you have to do is put the remote to your cheek and click the button why pressed against your cheek what this does is it sends the signal using you as a huge antenna.
By: donovan2themax5

Continue Reading »]]>
Wed, 26 Jun 2013 12:00:40 PDT
how to make and action sport video http://www.instructables.com/id/how-to-make-and-action-sport-video/ http://cdn.instructables.com/FDL/9W3U/HI3TJT2C/FDL9W3UHI3TJT2C.SQUARE2.jpg http://cdn.instructables.com/FDL/9W3U/HI3TJT2C/FDL9W3UHI3TJT2C.SQUARE.jpg http://cdn.instructables.com/FDL/9W3U/HI3TJT2C/FDL9W3UHI3TJT2C.SMALL.jpg danbranxl ok, you want to edit or film your action sport video dont you here are som dot points to keep your viewers interested. i made a quick demo of a good action sport video for example i will be using rally driving. - ok lets first say that you dont want the people getting bored. - make sure the images i...
By: danbranxl

Continue Reading »]]>
Sat, 22 Jun 2013 04:23:02 PDT
Reverse engineering simple sheet metal brackets (From a Volvo S70) http://www.instructables.com/id/Reverse-engineering-simple-sheet-metal-brackets-F/ http://cdn.instructables.com/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SQUARE2.jpg http://cdn.instructables.com/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SQUARE.jpg http://cdn.instructables.com/FZT/ETNW/HHJOCBEJ/FZTETNWHHJOCBEJ.SMALL.jpg gasketcase /* I decided to help a friend replace the radiator in his Volvo not long ago. Mistake 1! Since jacks and stands are nuisances, we decided to skip them and contort under the bumper and around the still draining coolant to reach the various elements of the radiator for removal. Following the first res...
By: gasketcase

Continue Reading »]]>
Wed, 5 Jun 2013 13:55:02 PDT
How To Install The LED Angel Eyes In Your BMW Correctly? http://www.instructables.com/id/How-To-Install-The-LED-Angel-Eyes-In-Your-BMW-Corr/ http://cdn.instructables.com/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SQUARE2.jpg http://cdn.instructables.com/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SQUARE.jpg http://cdn.instructables.com/FNA/2P6X/HH2VU2GV/FNA2P6XHH2VU2GV.SMALL.jpg ilovejdmtoy Many BMW owners face difficulty while installing the BMW LED angel eyes ring marker bulbs.  While some struggle with the wiring issues, others are confused with the lighting disasters. Most of the people figure out the problem only after the installation process is complete and then they don’t know ...
By: ilovejdmtoy

Continue Reading »]]>
Tue, 28 May 2013 11:26:17 PDT
Re-sealing a windshield gasket http://www.instructables.com/id/Re-sealing-a-windshield-gasket/ http://cdn.instructables.com/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SQUARE2.jpg http://cdn.instructables.com/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SQUARE.jpg http://cdn.instructables.com/FSR/RSAD/HGH6RVNF/FSRRSADHGH6RVNF.SMALL.jpg acevh3 The gasket had completely popped out of its channel for about 18" on the top edge of the windshield; the rest of it looked like it was still sealed in place just fine, and it was still attached to the metal trim covering. I didn't want to take the whole thing out to put in a new one, and really didn...
By: acevh3

Continue Reading »]]>
Wed, 15 May 2013 23:57:48 PDT
1990 Mustang GT Info Center http://www.instructables.com/id/1990-Mustang-GT-Info-Center/ http://cdn.instructables.com/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SQUARE2.jpg http://cdn.instructables.com/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SQUARE.jpg http://cdn.instructables.com/FPB/6C16/HGH6XT8T/FPB6C16HGH6XT8T.SMALL.jpg TankMorph *** UPDATE: v3.6 includes fixes to time and RTC time to display before GPS signal lock *** *** NEXT: hook up and calibrate the outside temp sensor *** This Arduino project uses a 20x4 LCD I installed in place of my stock speedometer to display useful information similar to this: ▀▀█ ▀▀█       12:...
By: TankMorph

Continue Reading »]]>
Wed, 1 May 2013 23:47:43 PDT
dent b gone- dent puller http://www.instructables.com/id/dent-b-gone-dent-puller/ http://cdn.instructables.com/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SQUARE2.jpg http://cdn.instructables.com/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SQUARE.jpg http://cdn.instructables.com/FXQ/V78O/HFPTEBAB/FXQV78OHFPTEBAB.SMALL.jpg crogers11 I was rear ended and the tail of the honda was folded in.  I am going to remove these dents at Techshop.  Techshop has some dent puller devices, but I wanted a larger slide hammer to work on the honda.  I made this slide hammer at Techshop using the sand blaster, metal cut shop saw, drill press  and...
By: crogers11

Continue Reading »]]>
Mon, 22 Apr 2013 13:04:42 PDT
How to apply carbon fiber vinyl sheet for car interior trim http://www.instructables.com/id/How-to-apply-carbon-fiber-vinyl-sheet-for-car-inte/ http://cdn.instructables.com/FJU/BM66/HFBJVZF0/FJUBM66HFBJVZF0.SQUARE2.jpg http://cdn.instructables.com/FJU/BM66/HFBJVZF0/FJUBM66HFBJVZF0.SQUARE.jpg http://cdn.instructables.com/FJU/BM66/HFBJVZF0/FJUBM66HFBJVZF0.SMALL.jpg ilovejdmtoy Have you bought the just 3M Di-Noc like carbon fiber sheets for your car interior trim and don't know how to apply them? If yes, then this guide might just come as a pleasant surprise for you. Carbon fiber vinyl sheets come in highly customized packages and cannot be returned back once sold. Hence, ...
By: ilovejdmtoy

Continue Reading »]]>
Tue, 9 Apr 2013 15:40:37 PDT
How to install 921 T15 LED Bulbs For Backup Reverse Lights http://www.instructables.com/id/How-to-install-921-T15-LED-Bulbs-For-Backup-Revers/ http://cdn.instructables.com/F52/O88I/HF23MG4T/F52O88IHF23MG4T.SQUARE2.jpg http://cdn.instructables.com/F52/O88I/HF23MG4T/F52O88IHF23MG4T.SQUARE.jpg http://cdn.instructables.com/F52/O88I/HF23MG4T/F52O88IHF23MG4T.SMALL.jpg ilovejdmtoy Have you thought of adding a pair LED backup reverse lights for your car and are finding it difficult to install? Moreover, is your old car waiting to be spiced up and you don't know how to fix the new embodiments? If yes, then this installation guide might just come as a treat for you. Read below t...
By: ilovejdmtoy

Continue Reading »]]>
Tue, 9 Apr 2013 11:13:14 PDT
Fake A/C Fan http://www.instructables.com/id/Fake-AC-Fan/ http://cdn.instructables.com/F43/NJG7/HET1AVCH/F43NJG7HET1AVCH.SQUARE2.jpg http://cdn.instructables.com/F43/NJG7/HET1AVCH/F43NJG7HET1AVCH.SQUARE.jpg http://cdn.instructables.com/F43/NJG7/HET1AVCH/F43NJG7HET1AVCH.SMALL.jpg usbdevice I want a fan that comes with a adjustable vent so I can control the direction of the air just like I could in a car. So I built one. What you need: - Car A/C Vent - 80mm 12V PC fan - Bunch of styrofoam (from laptop and gadget boxes) - Double-sided foam tape - 12V power supply or battery I found a ...
By: usbdevice

Continue Reading »]]>
Fri, 29 Mar 2013 09:49:09 PDT
Fixing those stubborn faded opaque headlights. http://www.instructables.com/id/Fixing-those-stubborn-faded-opaque-headlights/ http://cdn.instructables.com/FOF/RRDV/HEBNA50N/FOFRRDVHEBNA50N.SQUARE2.jpg http://cdn.instructables.com/FOF/RRDV/HEBNA50N/FOFRRDVHEBNA50N.SQUARE.jpg http://cdn.instructables.com/FOF/RRDV/HEBNA50N/FOFRRDVHEBNA50N.SMALL.jpg kenwork My headlamps suck!  They are clouded and badly faded.  Turns out my PT Cruiser came with non-UV-protected headlights...  So I tried the toothpaste idea (no go). While sitting out front with my sweetie looking at my freshly cleaned car with fugly faded headlamps, I thought that maybe rubbing compoun...
By: kenwork

Continue Reading »]]>
Sat, 16 Mar 2013 14:58:11 PDT
How to install LED Scanner Knight Rider Light http://www.instructables.com/id/How-to-install-LED-Scanner-Knight-Rider-Light/ http://cdn.instructables.com/FNU/HJ01/HEBN3NAC/FNUHJ01HEBN3NAC.SQUARE2.jpg http://cdn.instructables.com/FNU/HJ01/HEBN3NAC/FNUHJ01HEBN3NAC.SQUARE.jpg http://cdn.instructables.com/FNU/HJ01/HEBN3NAC/FNUHJ01HEBN3NAC.SMALL.jpg ilovejdmtoy You can find this product under LED Scanner Knight Rider Kit 1) Position the LED scanner bar so the wiring side is close to the car battery 2) Tie the LED scanner bar behind the grille using zip ties 3) Make sure do not bend the end wiring portion 4) Connect the LED scanner bar to the control mo...
By: ilovejdmtoy

Continue Reading »]]>
Fri, 15 Mar 2013 11:09:22 PDT
AKINA - My Evo http://www.instructables.com/id/AKINA-My-Evo/ http://cdn.instructables.com/FTE/V901/HE07POA1/FTEV901HE07POA1.SQUARE2.jpg http://cdn.instructables.com/FTE/V901/HE07POA1/FTEV901HE07POA1.SQUARE.jpg http://cdn.instructables.com/FTE/V901/HE07POA1/FTEV901HE07POA1.SMALL.jpg Gunther45 Here is my Baby. I will list the Mods as well as some simple walk though of how I did the wiring so maybe that will justify it a bit. Main Image: Engine Bay Performance Mods K&N Typhoon Intake and UICP Synapes Diverter Valve HKS blow off valve piping comming off the LICP Vacuum Block Grimmspeed 3 ...
By: Gunther45

Continue Reading »]]>
Mon, 11 Mar 2013 17:33:58 PDT
Car Headliner - Install NEW with white glue for under $10 http://www.instructables.com/id/Car-Headliner-Install-NEW-for-under-10/ http://cdn.instructables.com/FGN/MLAA/HDXMH080/FGNMLAAHDXMH080.SQUARE2.jpg http://cdn.instructables.com/FGN/MLAA/HDXMH080/FGNMLAAHDXMH080.SQUARE.jpg http://cdn.instructables.com/FGN/MLAA/HDXMH080/FGNMLAAHDXMH080.SMALL.jpg TheGeniusCreates Hello everybody. How many times have you used pushpins to keep up that annoying sagging headliner? Guess what. With $10, a bottle of White Elmers glue, some fabric, a plastic bristle brush, and a screwdriver you can stop this problem forever! This is a one-page write up of how to repair your saggi...
By: TheGeniusCreates

Continue Reading »]]>
Tue, 5 Mar 2013 21:19:32 PST
Fixing a Trunk Leak in a Honda Civic http://www.instructables.com/id/Fixing-a-Trunk-Leak-in-a-Honda-Civic/ http://cdn.instructables.com/FBK/18FQ/HDOVW9WT/FBK18FQHDOVW9WT.SQUARE2.jpg http://cdn.instructables.com/FBK/18FQ/HDOVW9WT/FBK18FQHDOVW9WT.SQUARE.jpg http://cdn.instructables.com/FBK/18FQ/HDOVW9WT/FBK18FQHDOVW9WT.SMALL.jpg Johnny_B_Good Water in the trunk? There are at least three places that need to be checked and sealed with silicone to prevent the trunk from getting wet. 1. Seal above the tail lights. 2. Seal the rain channel around the trunk. 3. Seal the gap at the bottom of the rear windshield.
By: Johnny_B_Good

Continue Reading »]]>
Wed, 27 Feb 2013 17:45:04 PST
EZ pass Rearview Mirror Mount http://www.instructables.com/id/EZ-pass-Rearview-Mirror-Mount/ http://cdn.instructables.com/FR9/B3GZ/HCJOFJ2P/FR9B3GZHCJOFJ2P.SQUARE2.jpg http://cdn.instructables.com/FR9/B3GZ/HCJOFJ2P/FR9B3GZHCJOFJ2P.SQUARE.jpg http://cdn.instructables.com/FR9/B3GZ/HCJOFJ2P/FR9B3GZHCJOFJ2P.SMALL.jpg jm31181 I hated the way EZ pass mounted to the window.  The Velcro turns color as time passes and its just gaudy looking.  This mount allows the EZ pass to sit inside the car but angled enough to still be read by the tolls.  Parts List: EZ Pass 3M velcro bicycle reflector mount rubber tubing How To: Mainl...
By: jm31181

Continue Reading »]]>
Wed, 30 Jan 2013 05:21:26 PST
Automotive festoon adaptor. http://www.instructables.com/id/Automotive-festoon-adaptor/ http://cdn.instructables.com/FXF/9F09/HCB8CURQ/FXF9F09HCB8CURQ.SQUARE2.jpg http://cdn.instructables.com/FXF/9F09/HCB8CURQ/FXF9F09HCB8CURQ.SQUARE.jpg http://cdn.instructables.com/FXF/9F09/HCB8CURQ/FXF9F09HCB8CURQ.SMALL.jpg Eric Sullivan I bought an LED replacement bulb to rplace the interior light in the Roof Tent of my Mazda Bongo camper.  The original fixture is as dim as a Toc H lamp. Unfortunately I failed to measure the lamp and the replacement was a size bigger festoon.  Not to be one to give up, I had a look on the Interweb...
By: Eric Sullivan

Continue Reading »]]>
Mon, 28 Jan 2013 02:25:09 PST
Car Window Fix http://www.instructables.com/id/Car-Window-Fix-1/ http://cdn.instructables.com/FDI/SWI6/HBFFJ872/FDISWI6HBFFJ872.SQUARE2.jpg http://cdn.instructables.com/FDI/SWI6/HBFFJ872/FDISWI6HBFFJ872.SQUARE.jpg http://cdn.instructables.com/FDI/SWI6/HBFFJ872/FDISWI6HBFFJ872.SMALL.jpg 10AMautomatic Introduction This is why you don’t get electric motors in car windows.  After 20 years, they quit working.  Until I find the desire to fix the window (and I might not since it is faster up and down now) the following describes how I went about rigging it up. The motor stopped working on my driver’s...
By: 10AMautomatic

Continue Reading »]]>
Fri, 4 Jan 2013 11:49:22 PST
Blinker Indicators Using LEDs http://www.instructables.com/id/Blinker-Indicators-Using-LEDs-1/ http://cdn.instructables.com/FNE/XD0L/HBHGL80N/FNEXD0LHBHGL80N.SQUARE2.jpg http://cdn.instructables.com/FNE/XD0L/HBHGL80N/FNEXD0LHBHGL80N.SQUARE.jpg http://cdn.instructables.com/FNE/XD0L/HBHGL80N/FNEXD0LHBHGL80N.SMALL.jpg 10AMautomatic Introduction I bought a '91 S-10 Blazer almost 7 years ago now from a good friend and it still runs great.  Each year I have to pass state inspection which is usually no problem...  The speedometer has not worked since I have had the vehicle.  I tried to fix it but could not find any problems when t...
By: 10AMautomatic

Continue Reading »]]>
Fri, 4 Jan 2013 11:27:52 PST
Jeep JK Drill-less CB Mount - Cheap & Easy http://www.instructables.com/id/Jeep-JK-Drill-less-CB-Mount-Cheap-Easy/ http://cdn.instructables.com/FRJ/ARV5/HAWSI5KN/FRJARV5HAWSI5KN.SQUARE2.jpg http://cdn.instructables.com/FRJ/ARV5/HAWSI5KN/FRJARV5HAWSI5KN.SQUARE.jpg http://cdn.instructables.com/FRJ/ARV5/HAWSI5KN/FRJARV5HAWSI5KN.SMALL.jpg ejsolomo I decided that I wanted to install a CB Radio in my 2012 Jeep Wrangler JK, but I really didn't want to start drilling holes in it just yet.  In previous years (like on my old '07) there were some good pre existing fasteners that were easily accessible to just attach the CB's bracket to.  Not the cas...
By: ejsolomo

Continue Reading »]]>
Sat, 29 Dec 2012 06:50:58 PST
subwoofer buggy http://www.instructables.com/id/subwoofer-buggy/ http://cdn.instructables.com/FSH/ZVPC/HAQ38234/FSHZVPCHAQ38234.SQUARE2.jpg http://cdn.instructables.com/FSH/ZVPC/HAQ38234/FSHZVPCHAQ38234.SQUARE.jpg http://cdn.instructables.com/FSH/ZVPC/HAQ38234/FSHZVPCHAQ38234.SMALL.jpg ben5795 my subwoofer buggy si going to have a big speaker in it and a ipod connected to it so you can play music on it when you keep building stuff on it and it has double wish bone suspention
By: ben5795

Continue Reading »]]>
Sun, 23 Dec 2012 04:41:05 PST
Painting Car Headlights http://www.instructables.com/id/Painting-Car-Headlights/ http://cdn.instructables.com/FM3/1MI9/HAQ38Z09/FM31MI9HAQ38Z09.SQUARE2.jpg http://cdn.instructables.com/FM3/1MI9/HAQ38Z09/FM31MI9HAQ38Z09.SQUARE.jpg http://cdn.instructables.com/FM3/1MI9/HAQ38Z09/FM31MI9HAQ38Z09.SMALL.jpg Sonata85 Normal 0 MicrosoftInternetExplorer4 :) TAKE YOUR TIME, BE PATIENT, AND DON'T RUSH :) Here's another "mod" for automobiles/vans/trucks etc. While not very difficult, it requires a lot of patience to get it to look right, BUT you can save a lot of money...
By: Sonata85

Continue Reading »]]>
Sat, 22 Dec 2012 11:44:22 PST
Pull a Car Dent Using a Telephone Pole http://www.instructables.com/id/Pull-a-Car-Dent-Using-a-Telephone-Pole/ http://cdn.instructables.com/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SQUARE2.jpg http://cdn.instructables.com/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SQUARE.jpg http://cdn.instructables.com/F0A/P4OW/GYR35OR3/F0AP4OWGYR35OR3.SMALL.jpg hackmattr I bought a car with a major dent on the driver side rear quarter panel and rear door. Instead of buying a door panel and quarter panel, I decided to pull the dent. Using a slide hammer and stud welder was not the best method for this dent removal (Spent a couple days pulling it this way). Seeing n...
By: hackmattr

Continue Reading »]]>
Sat, 22 Dec 2012 01:04:20 PST