Instructables: exploring - photos - workshop http://www.instructables.com Sat, 19 Apr 2014 08:11:24 PDT BLOX v1.01 Not Just for Fun http://www.instructables.com/id/Not-Just-for-Fun/ http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SQUARE2.jpg http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SQUARE.jpg http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SMALL.jpg glassman15201 I started making wood tools for glassblowing so years ago and would spend allot of time making these little paddle ( a tool we use) key chains as giveaway ads. Cut each one out on the band saw and then brand the information in. Then one day at one of my "I made it at TechShop" sessions it hit me. I ...
By: glassman15201

Continue Reading »]]>
Tue, 15 Apr 2014 14:35:26 PDT
Bad idea good lesson http://www.instructables.com/id/Bad-idea-good-lesson/ http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SQUARE2.jpg http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SQUARE.jpg http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SMALL.jpg niall mc I Built this a few years ago I decided to run with the first design idea that came into my mind. The problem is it’s just not a practical table. Its too deep and it can’t really hold anything, I have a TV on it right now. All the other stuff….. DVR, satellite box etc are just sitting in the open pa...
By: niall mc

Continue Reading »]]>
Tue, 15 Apr 2014 10:22:41 PDT
Decorative Kleenex Cover http://www.instructables.com/id/Decorative-Kleenex-Cover/ http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SQUARE2.jpg http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SQUARE.jpg http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SMALL.jpg JMalmborg This is a nice decorative Kleenexbox Cover that was made with the laser cutter at TechShop in Chandler, AZ I found a website that will make a layout for a box and though I could use it for making my first laser cutter project. The website is http://boxmaker.rahulbotics.com/  I put in the dimensions ...
By: JMalmborg

Continue Reading »]]>
Mon, 14 Apr 2014 18:24:03 PDT
Wine tray http://www.instructables.com/id/Wine-tray/ http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SQUARE2.jpg http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SQUARE.jpg http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SMALL.jpg FS2010 For this wine tray I used 2 MDF boards 50cm x 25cm – one for the base and one as a top shelf. Aluminum pipe was sawed to 3 same parts - 15cm each one. In a base plate I drilled 3 through holes and then hollows, about 5 mm depth. On the next step I attached top board to the base in reason to drill 3 ...
By: FS2010

Continue Reading »]]>
Mon, 14 Apr 2014 14:06:34 PDT
Table for cartomancy http://www.instructables.com/id/Table-for-cartomancy/ http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SQUARE2.jpg http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SQUARE.jpg http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SMALL.jpg FS2010 After listening of some gothic band, I decided to make table for spirit seances or cartomancy :) I just drew and sawed needed shapes from a MDF - one board 60cm x 40cm for the table plate, and 2 boards 40cm x 30cm for the legs. "Mysterious symbols" were printed from internet and transferred with car...
By: FS2010

Continue Reading »]]>
Mon, 14 Apr 2014 13:08:37 PDT
PORTABLE PC DESK http://www.instructables.com/id/PORTABLE-PC-DESK/ http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SQUARE2.jpg http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SQUARE.jpg http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SMALL.jpg aakashkarekar I TRIED TO BUILD A SMALL STORAGE BOX OR CARRYING CONTAINER FOR ALL THE TOOLS AND EXTRA EQUIPMENTS WHICH I FOUND IN MY HOUSE AND FOR BUILDING THIS I HAD TO MAKE USE OF PC ENCLOSURE(C.P.U)
By: aakashkarekar

Continue Reading »]]>
Mon, 14 Apr 2014 10:26:50 PDT
An Aquaponics Setup for Your Aquarium http://www.instructables.com/id/An-Aquaponics-Setup-for-Your-Aquarium/ http://cdn.instructables.com/FPD/RL3X/HTVDYVV0/FPDRL3XHTVDYVV0.SQUARE2.jpg http://cdn.instructables.com/FPD/RL3X/HTVDYVV0/FPDRL3XHTVDYVV0.SQUARE.jpg http://cdn.instructables.com/FPD/RL3X/HTVDYVV0/FPDRL3XHTVDYVV0.SMALL.jpg scoot440 I wanted to build a cheap and easy aquaponics system to place in my existing 10 gallon aquarium. All parts were purchased from the nearest Home Depot except for the pump which came from Amazon.  The entire setup cost less than $40 and took about 3 hours to put together. One thing I like about this s...
By: scoot440

Continue Reading »]]>
Fri, 11 Apr 2014 12:27:22 PDT
Power Scary Sharpening System http://www.instructables.com/id/Power-Scary-Sharpening-System/ http://cdn.instructables.com/FMU/VH0V/HTVDYB3Q/FMUVH0VHTVDYB3Q.SQUARE2.jpg http://cdn.instructables.com/FMU/VH0V/HTVDYB3Q/FMUVH0VHTVDYB3Q.SQUARE.jpg http://cdn.instructables.com/FMU/VH0V/HTVDYB3Q/FMUVH0VHTVDYB3Q.SMALL.jpg pfred2 I was inspired to make this attachment after watching a YouTube video posted by someone named Dave Bardin and seeing this one machine he had in his workshop. I thought I could make one of those. Then I thought more and figured I really don't have the room for it, and it would have been a complicated...
By: pfred2

Continue Reading »]]>
Fri, 11 Apr 2014 09:40:56 PDT
Some small fixes. http://www.instructables.com/id/Some-small-fixes/ http://cdn.instructables.com/F7H/OOEE/HIWHQZPH/F7HOOEEHIWHQZPH.SQUARE2.jpg http://cdn.instructables.com/F7H/OOEE/HIWHQZPH/F7HOOEEHIWHQZPH.SQUARE.jpg http://cdn.instructables.com/F7H/OOEE/HIWHQZPH/F7HOOEEHIWHQZPH.SMALL.jpg Dave A I don't like throwing away stuff so  so now and then I just fix things, small and bigger. These are some simple small repairs I did. I fixed a parasol, an umbrella and a little pocket knive.
By: Dave A

Continue Reading »]]>
Thu, 10 Apr 2014 14:23:37 PDT
Multi use portable Work station http://www.instructables.com/id/Multi-use-portable-Work-station/ http://cdn.instructables.com/F67/ORYM/HTOUCZ0H/F67ORYMHTOUCZ0H.SQUARE2.jpg http://cdn.instructables.com/F67/ORYM/HTOUCZ0H/F67ORYMHTOUCZ0H.SQUARE.jpg http://cdn.instructables.com/F67/ORYM/HTOUCZ0H/F67ORYMHTOUCZ0H.SMALL.jpg Triclaw  It rolls up and fits in your pocket or trunk of the car you could make a dozen a fill an tool box or even a bug out bag uses are numerous . For this instructable I used my sculpting and pottery tools But it can be adapted for a almost unlimited amount of uses and used in almost any where it can be ...
By: Triclaw

Continue Reading »]]>
Mon, 7 Apr 2014 14:39:30 PDT
Tool belt from plastic bottle http://www.instructables.com/id/Tool-belt-from-plastic-bottle/ http://cdn.instructables.com/FE3/2813/HTOUE9EF/FE32813HTOUE9EF.SQUARE2.jpg http://cdn.instructables.com/FE3/2813/HTOUE9EF/FE32813HTOUE9EF.SQUARE.jpg http://cdn.instructables.com/FE3/2813/HTOUE9EF/FE32813HTOUE9EF.SMALL.jpg Graham Lane Here's an endlessly cheap solution to carrying screwdrivers and screws when you're up steps or ladders. You can modify a collection of these in different ways for different tools. You need: A plastic bottle A bandsaw, ideally, but strong scissors will do A drill or something to piece holes Cut a...
By: Graham Lane

Continue Reading »]]>
Mon, 7 Apr 2014 01:45:08 PDT
How to Build a Stool from One 2x4 http://www.instructables.com/id/How-to-Build-a-Stool-from-One-2x4/ http://cdn.instructables.com/FEW/TZF7/HTNO6RX3/FEWTZF7HTNO6RX3.SQUARE2.jpg http://cdn.instructables.com/FEW/TZF7/HTNO6RX3/FEWTZF7HTNO6RX3.SQUARE.jpg http://cdn.instructables.com/FEW/TZF7/HTNO6RX3/FEWTZF7HTNO6RX3.SMALL.jpg xbremer The following is a basic overview of how to build a three-legged stool from one eight-foot 2x4. This design pushes efficiency of material. Interestingly, the stools produced from one 2x4 tend to take on a character that is a caricature of the initial features that define the design... For instance, ...
By: xbremer

Continue Reading »]]>
Sun, 6 Apr 2014 01:12:55 PDT
Chinup bar and gymnastic rings http://www.instructables.com/id/The-perfect-home-gym-for-cheap/ http://cdn.instructables.com/FXQ/I6GA/HTOUD4TO/FXQI6GAHTOUD4TO.SQUARE2.jpg http://cdn.instructables.com/FXQ/I6GA/HTOUD4TO/FXQI6GAHTOUD4TO.SQUARE.jpg http://cdn.instructables.com/FXQ/I6GA/HTOUD4TO/FXQI6GAHTOUD4TO.SMALL.jpg stillonaroll I hate the step by step so here it is all in one.  This is a combination chinup bar/ adjustable gymnastic rings. These allow you to do basically every body weight exercise.  I am 6'1 about 215 lbs and it supports me no problem, with enough height too.  Materials needed: - 2 of these: http://www.ho...
By: stillonaroll

Continue Reading »]]>
Sat, 5 Apr 2014 14:35:09 PDT
How to Stain a Deck - DIY Staining you exterior deck with wood stain http://www.instructables.com/id/How-to-Stain-a-Deck-DIY-Staining-you-exterior-deck/ http://cdn.instructables.com/FH0/B9AL/HTLE9ZAG/FH0B9ALHTLE9ZAG.SQUARE2.jpg http://cdn.instructables.com/FH0/B9AL/HTLE9ZAG/FH0B9ALHTLE9ZAG.SQUARE.jpg http://cdn.instructables.com/FH0/B9AL/HTLE9ZAG/FH0B9ALHTLE9ZAG.SMALL.jpg jardinier Following the cleaning of the wrap around deck or porch, it's now time to apply a translucent coating or transparent deck stain to protect your covered deck. Staining a deck is a tedious task. Use a high-performance product for durability and optimum protection. It should also consider keeping the...
By: jardinier

Continue Reading »]]>
Fri, 4 Apr 2014 08:33:01 PDT
Cheap workshop stool on castors http://www.instructables.com/id/Cheap-workshop-stool-on-castors/ http://cdn.instructables.com/FHV/IPRK/HTKXVA0C/FHVIPRKHTKXVA0C.SQUARE2.jpg http://cdn.instructables.com/FHV/IPRK/HTKXVA0C/FHVIPRKHTKXVA0C.SQUARE.jpg http://cdn.instructables.com/FHV/IPRK/HTKXVA0C/FHVIPRKHTKXVA0C.SMALL.jpg Graham Lane I was given an old vacuum cleaner for my workshop.  Very soon I understood why!  The motor failed.  I was left with a stainless steel bin on wheels.  Needing a stool for my modelling workbench removed the unwanted bits.  I then cut two discs of 10mm plywood, one the diameter of the outside of the to...
By: Graham Lane

Continue Reading »]]>
Thu, 3 Apr 2014 22:20:09 PDT
Rack for pliers, sidecutters, etc. close to hand http://www.instructables.com/id/Rack-for-pliers-sidecutters-etc-close-to-hand/ http://cdn.instructables.com/F6S/WFTY/HTIWJF5W/F6SWFTYHTIWJF5W.SQUARE2.jpg http://cdn.instructables.com/F6S/WFTY/HTIWJF5W/F6SWFTYHTIWJF5W.SQUARE.jpg http://cdn.instructables.com/F6S/WFTY/HTIWJF5W/F6SWFTYHTIWJF5W.SMALL.jpg Graham Lane I always had trouble with pliers, sidecutters, etc. in the workshop as there is no easy way to rack them.  I tend to leave them lying around and then can't find them or they clutter up the bench. This simple rack provides the solution and the tools are the right way up.  You can fix it to the works...
By: Graham Lane

Continue Reading »]]>
Thu, 3 Apr 2014 05:54:44 PDT
Catch-all for drilling in walls http://www.instructables.com/id/Catch-all-for-drilling-in-walls/ http://cdn.instructables.com/FXG/255L/HTIWDT4E/FXG255LHTIWDT4E.SQUARE2.jpg http://cdn.instructables.com/FXG/255L/HTIWDT4E/FXG255LHTIWDT4E.SQUARE.jpg http://cdn.instructables.com/FXG/255L/HTIWDT4E/FXG255LHTIWDT4E.SMALL.jpg Graham Lane This is my first attempt at loading an idea to Instructables.  Please be gentle with me! Believe it or not I've been using this bin for over thirty years, and it's still not worn out! All you need is: An empty ice-cream container Strong scissors or craft knife Wide masking tape It stops the dust...
By: Graham Lane

Continue Reading »]]>
Wed, 2 Apr 2014 22:06:15 PDT
Simple Birch Limb Wall Shelf http://www.instructables.com/id/Simple-Birch-Limb-Wall-Shelf/ http://cdn.instructables.com/FFW/F0N2/HTIWDSMS/FFWF0N2HTIWDSMS.SQUARE2.jpg http://cdn.instructables.com/FFW/F0N2/HTIWDSMS/FFWF0N2HTIWDSMS.SQUARE.jpg http://cdn.instructables.com/FFW/F0N2/HTIWDSMS/FFWF0N2HTIWDSMS.SMALL.jpg phemy I recently redid my bedroom in a nature theme and wanted to incorporate birch somehow.  I went and cut down some small birch trees on a friends property and used the limbs to make this shelf.  I bought cheap pine board at Home Depot and had them cut the boards to length for me because I only have a ...
By: phemy

Continue Reading »]]>
Wed, 2 Apr 2014 20:39:29 PDT
3-in-1 Smartphone holder http://www.instructables.com/id/3-in-1-Smartphone-holder/ http://cdn.instructables.com/F6Z/HJFE/HTGT8D8F/F6ZHJFEHTGT8D8F.SQUARE2.jpg http://cdn.instructables.com/F6Z/HJFE/HTGT8D8F/F6ZHJFEHTGT8D8F.SQUARE.jpg http://cdn.instructables.com/F6Z/HJFE/HTGT8D8F/F6ZHJFEHTGT8D8F.SMALL.jpg InDezign This is a very helpful smartphone holder which can be used for - charging (e.g. in hotels), - making selfies or - watching a video with friends on a party. It's made of cardoard, it's extremely lightweight, flat foldable and can be used nearly everywhere - especially on partes & events.. How to ma...
By: InDezign

Continue Reading »]]>
Tue, 1 Apr 2014 01:29:50 PDT
Metal Brackets for Playscape Roof http://www.instructables.com/id/Metal-Brackets-for-playscape-roof/ http://cdn.instructables.com/FP0/MV9D/HTEFM71S/FP0MV9DHTEFM71S.SQUARE2.jpg http://cdn.instructables.com/FP0/MV9D/HTEFM71S/FP0MV9DHTEFM71S.SQUARE.jpg http://cdn.instructables.com/FP0/MV9D/HTEFM71S/FP0MV9DHTEFM71S.SMALL.jpg dirtrydr88 This instructable is going to show you how to make brackets to add on a roof to an open topped play scape. This all was made inside my local TechShop (Austin-Round Rock). Equipment Needed: Drill Press (With 11/32 drill bit) Mig Welder Material Used: 1" by 2" Steel Square Tubing (Had a tube left o...
By: dirtrydr88

Continue Reading »]]>
Sun, 30 Mar 2014 10:09:27 PDT
P.E.T. Rain Gutter http://www.instructables.com/id/PET-Rain-Gutter/ http://cdn.instructables.com/FE6/LEPC/HTDSP3UC/FE6LEPCHTDSP3UC.SQUARE2.jpg http://cdn.instructables.com/FE6/LEPC/HTDSP3UC/FE6LEPCHTDSP3UC.SQUARE.jpg http://cdn.instructables.com/FE6/LEPC/HTDSP3UC/FE6LEPCHTDSP3UC.SMALL.jpg Misac-kun I was in need for a gutter to fill some barrels, but i didn't have the money for it. So I "Collected" some P.E.T. bottles around the street and made this gutter, it still need some fine adjustment but it's doing it's purpose. Then I used some para cord to install it.
By: Misac-kun

Continue Reading »]]>
Sun, 30 Mar 2014 08:31:38 PDT
Recycled Wooden Box Chest http://www.instructables.com/id/Recycled-Wooden-Box-Chest/ http://cdn.instructables.com/FGC/W1BO/HTDSP28R/FGCW1BOHTDSP28R.SQUARE2.jpg http://cdn.instructables.com/FGC/W1BO/HTDSP28R/FGCW1BOHTDSP28R.SQUARE.jpg http://cdn.instructables.com/FGC/W1BO/HTDSP28R/FGCW1BOHTDSP28R.SMALL.jpg Misac-kun One day i was returning home when I found a wooden box laying on the walkway. It was going to thrash with some office litter. This very moment i though i could make something useful from it, and them i get it back home, put some hinges and screws and them a new chest has been born! Gonna post the en...
By: Misac-kun

Continue Reading »]]>
Sun, 30 Mar 2014 06:47:30 PDT
Anemometer.... http://www.instructables.com/id/Anemometer-1/ http://cdn.instructables.com/FQ4/S907/HTDDW1MO/FQ4S907HTDDW1MO.SQUARE2.jpg http://cdn.instructables.com/FQ4/S907/HTDDW1MO/FQ4S907HTDDW1MO.SQUARE.jpg http://cdn.instructables.com/FQ4/S907/HTDDW1MO/FQ4S907HTDDW1MO.SMALL.jpg stevenarango Hello Fellow Instructables here is my DIY Anemometer  Using One Ball Bearing, One Bike Speedometer,Aluminium Tube, Hot Glue,Wood, PVC Pipe.  School Project    My Son Put it Together.    I  Got All The Parts Ready. Easy To do. Now Go And Make Something. And Hey Hey    Have Fun.
By: stevenarango

Continue Reading »]]>
Sat, 29 Mar 2014 17:27:31 PDT
Máquinas Térmicas - Como fazer uma latinha giratória ! http://www.instructables.com/id/Máquinas-Térmicas-Como-fazer-uma-latinha-giratória/ http://cdn.instructables.com/F3T/8DKV/HTD7S270/F3T8DKVHTD7S270.SQUARE2.jpg http://cdn.instructables.com/F3T/8DKV/HTD7S270/F3T8DKVHTD7S270.SQUARE.jpg http://cdn.instructables.com/F3T/8DKV/HTD7S270/F3T8DKVHTD7S270.SMALL.jpg Paulotee            Para começar este experimento serão necessários quatro materiais: Uma lata de alumínio, um rolo de barbante, agulha(s) e velas. Primeiramente pegue uma latinha fechada e  faça um furo na lateral da lata com uma agulha(CUIDADO PARA NÃO SE FURAR), esvazie a lata totalmente. Após isso, faça ...
By: Paulotee

Continue Reading »]]>
Sat, 29 Mar 2014 11:52:50 PDT
Clean Deck - How to Clean Deck with wood cleaner and pressure washer http://www.instructables.com/id/Clean-Deck-How-to-Clean-Deck-with-wood-cleaner-and/ http://cdn.instructables.com/FRH/UN0A/HTC66ZXM/FRHUN0AHTC66ZXM.SQUARE2.jpg http://cdn.instructables.com/FRH/UN0A/HTC66ZXM/FRHUN0AHTC66ZXM.SQUARE.jpg http://cdn.instructables.com/FRH/UN0A/HTC66ZXM/FRHUN0AHTC66ZXM.SMALL.jpg jardinier Hello friends, I built a wooden raised deck and wrap-around deck or porch. We used the pressure-treated wood as material. Three years after construction, it's time to clean deck with a wood cleaner before staining. How to get the gray out of a wood deck? How to remove mold and mildew on a raised...
By: jardinier

Continue Reading »]]>
Fri, 28 Mar 2014 17:55:04 PDT
Tomato Hot House http://www.instructables.com/id/Tomato-Hot-House/ http://cdn.instructables.com/FCO/JL0S/HTBY6MZF/FCOJL0SHTBY6MZF.SQUARE2.jpg http://cdn.instructables.com/FCO/JL0S/HTBY6MZF/FCOJL0SHTBY6MZF.SQUARE.jpg http://cdn.instructables.com/FCO/JL0S/HTBY6MZF/FCOJL0SHTBY6MZF.SMALL.jpg graydog111 I generally plant 30 to 40 tomato plants in my garden, but a late freeze can really be a problem. Here is my solution, I hope. My neighbor put some aluminum framed storm windows out by the curb for trash pickup. I grabbed them up, not knowing at the time what I was going to use them for. Five years...
By: graydog111

Continue Reading »]]>
Thu, 27 Mar 2014 16:34:09 PDT
Underwear Hanger - Colgador de ropa interior http://www.instructables.com/id/Underwear-Hanger-Colgador-de-ropa-interior/ http://cdn.instructables.com/FJU/LM3E/HT8R4FXP/FJULM3EHT8R4FXP.SQUARE2.jpg http://cdn.instructables.com/FJU/LM3E/HT8R4FXP/FJULM3EHT8R4FXP.SQUARE.jpg http://cdn.instructables.com/FJU/LM3E/HT8R4FXP/FJULM3EHT8R4FXP.SMALL.jpg ALEX_HOLAND Esta idea es el resultado de una flojera importante. Tengo tres mujeres en casa, eso significa un montón de ropa interior femenina, y colgarla es muy incomodo... Así que se me ocurrió esta idea, espero que les guste. Materiales: Un trozo de tubo de PVC a su gusto. Un trozo de alambre mas larga q...
By: ALEX_HOLAND

Continue Reading »]]>
Wed, 26 Mar 2014 11:45:00 PDT
Lawn Mower Blade Sharpening Tool http://www.instructables.com/id/Lawn-Mower-Blade-Sharpening-Tool/ http://cdn.instructables.com/FER/T2ZO/HT7P5KF0/FERT2ZOHT7P5KF0.SQUARE2.jpg http://cdn.instructables.com/FER/T2ZO/HT7P5KF0/FERT2ZOHT7P5KF0.SQUARE.jpg http://cdn.instructables.com/FER/T2ZO/HT7P5KF0/FERT2ZOHT7P5KF0.SMALL.jpg graydog111 I generally sharpen the blades for my 60 inch cut mower 5 sets per session.  The mower uses 3 blades, so that's 15 blades.  I use a Bench grinder but holding them while sharpening is a tiring, difficult job.   I thought, "There must be a better way of doing this."  I made this tool which consists of...
By: graydog111

Continue Reading »]]>
Wed, 26 Mar 2014 11:23:07 PDT
Aquaponics in a drawer http://www.instructables.com/id/Aquaponics-in-a-drawer/ http://cdn.instructables.com/FKI/VU98/HT7P4U07/FKIVU98HT7P4U07.SQUARE2.jpg http://cdn.instructables.com/FKI/VU98/HT7P4U07/FKIVU98HT7P4U07.SQUARE.jpg http://cdn.instructables.com/FKI/VU98/HT7P4U07/FKIVU98HT7P4U07.SMALL.jpg daffo3dil Hi all, greetings! I am showcasing an aquaponics farm that I built in a drawer. The lowermost drawer houses the shrimp (we could'nt keep fish because of ethics issues) and water is pumped from this level with a pump to the upper drawers where the plants are kept. Holes are drilled in the drawers so ...
By: daffo3dil

Continue Reading »]]>
Tue, 25 Mar 2014 19:26:37 PDT
Lab-in-a-box (The Wide One) http://www.instructables.com/id/Lab-in-a-box-The-Wide-One/ http://cdn.instructables.com/FBH/KCPH/HT36TTET/FBHKCPHHT36TTET.SQUARE2.jpg http://cdn.instructables.com/FBH/KCPH/HT36TTET/FBHKCPHHT36TTET.SQUARE.jpg http://cdn.instructables.com/FBH/KCPH/HT36TTET/FBHKCPHHT36TTET.SMALL.jpg mattbrailsford Inspired by the lab-in-a-box created by McLovinGyver (http://www.instructables.com/id/Electronic-Lab-in-a-Box/) and the portable lab created by Morten Nisker (http://nisker.net/projects/mobile-electronics-workbench/), I thought I'd have a go at creating my own. LIke the labs created by these guys, I...
By: mattbrailsford

Continue Reading »]]>
Sun, 23 Mar 2014 10:47:44 PDT
Penrose mosaic http://www.instructables.com/id/Penrose-mosaic/ http://cdn.instructables.com/FNU/0W8L/HSXOC8DK/FNU0W8LHSXOC8DK.SQUARE2.jpg http://cdn.instructables.com/FNU/0W8L/HSXOC8DK/FNU0W8LHSXOC8DK.SQUARE.jpg http://cdn.instructables.com/FNU/0W8L/HSXOC8DK/FNU0W8LHSXOC8DK.SMALL.jpg aartamoshin Made a penrose mosaic set. It's well known mathematical mosaic with great variation of patterns through only 2 variants of initial pieces. 1 version is from cardboard, 2nd version is lasercut wood.   Lasercutted at fablab77
By: aartamoshin

Continue Reading »]]>
Thu, 20 Mar 2014 00:53:26 PDT
Computer mod cover African http://www.instructables.com/id/Computer-mod-cover-African/ http://cdn.instructables.com/FUA/Y5YQ/HSXO92YK/FUAY5YQHSXO92YK.SQUARE2.jpg http://cdn.instructables.com/FUA/Y5YQ/HSXO92YK/FUAY5YQHSXO92YK.SQUARE.jpg http://cdn.instructables.com/FUA/Y5YQ/HSXO92YK/FUAY5YQHSXO92YK.SMALL.jpg nollie551 MATERIALS 1. Computer from the thrift store i paid $6.97 2. scrap 1x4 3 . about 1/4 sheet of OSB I got a entire sheet for $7.00 4. cheap acrylic paint from the craft store 5  painters tape from the dollar store 6. 1x1 in flat hinge
By: nollie551

Continue Reading »]]>
Wed, 19 Mar 2014 16:38:06 PDT
ole school arcade http://www.instructables.com/id/ole-school-arcade/ http://cdn.instructables.com/FKN/X1R0/HSXO90RM/FKNX1R0HSXO90RM.SQUARE2.jpg http://cdn.instructables.com/FKN/X1R0/HSXO90RM/FKNX1R0HSXO90RM.SQUARE.jpg http://cdn.instructables.com/FKN/X1R0/HSXO90RM/FKNX1R0HSXO90RM.SMALL.jpg nollie551 this is one of the only things that you can do with an old 13" tube tv
By: nollie551

Continue Reading »]]>
Tue, 18 Mar 2014 20:07:42 PDT
Electric motor bike (revised with better description) http://www.instructables.com/id/Electric-motor-bike/ http://cdn.instructables.com/FB4/OCDM/HSVGGWSY/FB4OCDMHSVGGWSY.SQUARE2.jpg http://cdn.instructables.com/FB4/OCDM/HSVGGWSY/FB4OCDMHSVGGWSY.SQUARE.jpg http://cdn.instructables.com/FB4/OCDM/HSVGGWSY/FB4OCDMHSVGGWSY.SMALL.jpg moslof88 I recently saw this mountain bike with a free sign on it, so I snatched it up and took it home and with minimal effort got it running like new again. Then I remembered i had a razor scooter motor and I decided to see if I could power the bike using only the manufacturers wheel and apply friction to ...
By: moslof88

Continue Reading »]]>
Tue, 18 Mar 2014 18:34:28 PDT
Belt Sander Stand/Mini Belt Sander http://www.instructables.com/id/Belt-Sander-StandMini-Belt-Sander/ http://cdn.instructables.com/FOK/B4FE/HSVGD3Z0/FOKB4FEHSVGD3Z0.SQUARE2.jpg http://cdn.instructables.com/FOK/B4FE/HSVGD3Z0/FOKB4FEHSVGD3Z0.SQUARE.jpg http://cdn.instructables.com/FOK/B4FE/HSVGD3Z0/FOKB4FEHSVGD3Z0.SMALL.jpg camping crazy This is a simple stand I made to hold my portable belt sander to the table for knife making and woodworking. My sander came with a flat back made to bolt to a table, but I am too cheap to buy the brackets so I made my own!! The sander is held on the side with small strips of MDF screwed to the workb...
By: camping crazy

Continue Reading »]]>
Mon, 17 Mar 2014 17:27:13 PDT
Bar's Open Acrylic Glass Engraving http://www.instructables.com/id/Bars-Open-Acrylic-Glass-Engraving/ http://cdn.instructables.com/F0U/D73B/HSVGZVAL/F0UD73BHSVGZVAL.SQUARE2.jpg http://cdn.instructables.com/F0U/D73B/HSVGZVAL/F0UD73BHSVGZVAL.SQUARE.jpg http://cdn.instructables.com/F0U/D73B/HSVGZVAL/F0UD73BHSVGZVAL.SMALL.jpg CabbitCastle Background: This was my very first real DIY project which I made all the way back in 2009. As back in the day I never even considered making a how-to, there are no progress pictures and any pictures taken were taken with the means I had - a very humble N97 cellphone camera. I apologize both for lack...
By: CabbitCastle

Continue Reading »]]>
Mon, 17 Mar 2014 04:39:21 PDT
Cold Stratification Guide - How to Stratify Seeds in the refrigerator http://www.instructables.com/id/Cold-Stratification-Guide-How-to-Stratify-Seeds-in/ http://cdn.instructables.com/F22/I12Z/HSRZOHMV/F22I12ZHSRZOHMV.SQUARE2.jpg http://cdn.instructables.com/F22/I12Z/HSRZOHMV/F22I12ZHSRZOHMV.SQUARE.jpg http://cdn.instructables.com/F22/I12Z/HSRZOHMV/F22I12ZHSRZOHMV.SMALL.jpg jardinier Hello, Each year, i start some seeds indoor under grow lights. The Cold Moist stratification is the process by which we imitate the period of cold and moisture in nature required for perennials seeds germination (break dormancy). These perennials or native perennials seeds are much more difficult ...
By: jardinier

Continue Reading »]]>
Sun, 16 Mar 2014 16:40:35 PDT
easy homemade walnut coasters http://www.instructables.com/id/easy-homemade-walnut-costers/ http://cdn.instructables.com/FYB/93BZ/HSTP1WKL/FYB93BZHSTP1WKL.SQUARE2.jpg http://cdn.instructables.com/FYB/93BZ/HSTP1WKL/FYB93BZHSTP1WKL.SQUARE.jpg http://cdn.instructables.com/FYB/93BZ/HSTP1WKL/FYB93BZHSTP1WKL.SMALL.jpg sonic broom These are some of my walnut coasters that I made  please comment and subscribe 
By: sonic broom

Continue Reading »]]>
Sun, 16 Mar 2014 11:12:02 PDT
stove shovel head http://www.instructables.com/id/stove-shovel-head/ http://cdn.instructables.com/F5R/WMSP/HSRO050Z/F5RWMSPHSRO050Z.SQUARE2.jpg http://cdn.instructables.com/F5R/WMSP/HSRO050Z/F5RWMSPHSRO050Z.SQUARE.jpg http://cdn.instructables.com/F5R/WMSP/HSRO050Z/F5RWMSPHSRO050Z.SMALL.jpg Dowaine the head on are shovel for our wood stove broke so i decided to make one instead of spending 10 bucks for a new one. first i traced the the out line of the origanal shovel and cut it out of wood with a jig saw. i then cut out a peice of tin from a tin panel and put it on the wood template and hamme...
By: Dowaine

Continue Reading »]]>
Fri, 14 Mar 2014 09:49:07 PDT
My Workspace http://www.instructables.com/id/My-Workspace-21/ http://cdn.instructables.com/FIT/WR6D/HSASL064/FITWR6DHSASL064.SQUARE2.jpg http://cdn.instructables.com/FIT/WR6D/HSASL064/FITWR6DHSASL064.SQUARE.jpg http://cdn.instructables.com/FIT/WR6D/HSASL064/FITWR6DHSASL064.SMALL.jpg Nicooo Este es  mi pequeño espacio de trabajo donde realizo mis pequeños trabajos y planifico mis proyectos más grandes. También almaceno todas mis herramientas que he comprado a lo largo de 2 o 3 años.Es una pequeña esquina de el garage pero a medida que adquiero nuevas herramientas el espacio se hace más...
By: Nicooo

Continue Reading »]]>
Fri, 14 Mar 2014 09:31:57 PDT
Nickel Anode for Electroplating http://www.instructables.com/id/Nickel-Anode-for-Electroplating/ http://cdn.instructables.com/FFE/FTTL/HSPP6ZF5/FFEFTTLHSPP6ZF5.SQUARE2.jpg http://cdn.instructables.com/FFE/FTTL/HSPP6ZF5/FFEFTTLHSPP6ZF5.SQUARE.jpg http://cdn.instructables.com/FFE/FTTL/HSPP6ZF5/FFEFTTLHSPP6ZF5.SMALL.jpg vreinkymov This instructable shows how to make a nickel anode for electroplating for use with A_Steingrub's Nickel Electroplating Method, It works well for oddly shaped pieces such as these 1" ingots. Clamp the piece between two pieces of wood. Wood is a poor heat conductor so it will be easier to heat it...
By: vreinkymov

Continue Reading »]]>
Fri, 14 Mar 2014 00:10:38 PDT
How to make metal rings http://www.instructables.com/id/How-to-make-metal-rings/ http://cdn.instructables.com/F4M/QMK3/HSNFX4Y7/F4MQMK3HSNFX4Y7.SQUARE2.jpg http://cdn.instructables.com/F4M/QMK3/HSNFX4Y7/F4MQMK3HSNFX4Y7.SQUARE.jpg http://cdn.instructables.com/F4M/QMK3/HSNFX4Y7/F4MQMK3HSNFX4Y7.SMALL.jpg Eldalote Hello! I use metal rings in many of my instructables (for example this or this), so I decided to show you how to make them :) It's really easy! You can use them for jewelry, bracelets, chains, armor etc.. You will need: - drill - stick - steel wire - pincers and pliers - gloves ,,,and I think t...
By: Eldalote

Continue Reading »]]>
Thu, 13 Mar 2014 10:11:04 PDT
Suporte para violão - cano PVC / Guitar Stand - PVC pipes http://www.instructables.com/id/Support-for-guitar-using-PVC-pipes/ http://cdn.instructables.com/FUW/84JW/HSM56B51/FUW84JWHSM56B51.SQUARE2.jpg http://cdn.instructables.com/FUW/84JW/HSM56B51/FUW84JWHSM56B51.SQUARE.jpg http://cdn.instructables.com/FUW/84JW/HSM56B51/FUW84JWHSM56B51.SMALL.jpg brunnete8D Um simples faça-você-mesmo usando canos de PVC para criar um suporte barato para violão. Todas as medidas estão no PDF.  This is a simple DIY using PVC pipes to do a very cheap for stand guitar. All the measures are in PDF.
By: brunnete8D

Continue Reading »]]>
Wed, 12 Mar 2014 22:28:08 PDT
Add a light to your motorcycle..not just any light.. http://www.instructables.com/id/Add-a-light-to-your-motorcyclenot-just-any-light/ http://cdn.instructables.com/FVO/W4FI/HSNFWZ44/FVOW4FIHSNFWZ44.SQUARE2.jpg http://cdn.instructables.com/FVO/W4FI/HSNFWZ44/FVOW4FIHSNFWZ44.SQUARE.jpg http://cdn.instructables.com/FVO/W4FI/HSNFWZ44/FVOW4FIHSNFWZ44.SMALL.jpg Moddy Adding lights to your bike almost seems like an art as it is what you ride or how often. I have been working on this for about 6 months until I came up with this idea. I have wanted to add a light where there is a reflector behind the front wheel on both sides. Until recently there was only one ligh...
By: Moddy

Continue Reading »]]>
Wed, 12 Mar 2014 11:53:18 PDT
Laser Cut Business Card Holder - Made @ TechShop http://www.instructables.com/id/Laser-Cut-Business-Card-Holder-Made-TechShop/ http://cdn.instructables.com/FTZ/9TNU/HSM5070Q/FTZ9TNUHSM5070Q.SQUARE2.jpg http://cdn.instructables.com/FTZ/9TNU/HSM5070Q/FTZ9TNUHSM5070Q.SQUARE.jpg http://cdn.instructables.com/FTZ/9TNU/HSM5070Q/FTZ9TNUHSM5070Q.SMALL.jpg nvogt14 I signed up to TechShop recently and have been playing with their super cool laser cutter.  This business card holder is a simple project I made to get some practice in Illustrator, get more experience with the laser cutter, and test out a new airbrush that I bought not long ago.  The required tools...
By: nvogt14

Continue Reading »]]>
Mon, 10 Mar 2014 23:44:43 PDT
Home made seed starter http://www.instructables.com/id/Home-made-seed-starter/ http://cdn.instructables.com/FY9/NWY3/HSKFD6HR/FY9NWY3HSKFD6HR.SQUARE2.jpg http://cdn.instructables.com/FY9/NWY3/HSKFD6HR/FY9NWY3HSKFD6HR.SQUARE.jpg http://cdn.instructables.com/FY9/NWY3/HSKFD6HR/FY9NWY3HSKFD6HR.SMALL.jpg Twofinger I made this tray for starting some seeds in for the garden. It is the bottom of a flat of canned food. I lined it with aluminum foil for two reasons, one is to hold oversplash of water, and two is to reflect light to the plants when they start to grow and I put the light on them. they will get the l...
By: Twofinger

Continue Reading »]]>
Sun, 9 Mar 2014 09:50:34 PDT
From This To Great http://www.instructables.com/id/From-This-To-Great/ http://cdn.instructables.com/FU3/CXIW/HSHEGULV/FU3CXIWHSHEGULV.SQUARE2.jpg http://cdn.instructables.com/FU3/CXIW/HSHEGULV/FU3CXIWHSHEGULV.SQUARE.jpg http://cdn.instructables.com/FU3/CXIW/HSHEGULV/FU3CXIWHSHEGULV.SMALL.jpg stevenarango Hello Fellow  Instructables Do You Have a Messy Work Shop??   I Did. So  One Day I decided To Fix And Have All Organised And Looking Great A Place For Everything.  I Got rid of The old And Replace it With Cabinets And Build A Couple of Storage Units, With doors  And A Great Wall Tool Peg Board....
By: stevenarango

Continue Reading »]]>
Fri, 7 Mar 2014 15:19:22 PST
Installing a TS 6-position Tuner for your 99'-01' PowerStroke Excursion...2hrs flat! http://www.instructables.com/id/Installing-a-TS-6-position-Tuner-for-your-99-01-Po/ http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SQUARE2.jpg http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SQUARE.jpg http://cdn.instructables.com/FZO/XIJF/HSGRTCP0/FZOXIJFHSGRTCP0.SMALL.jpg Rapturee Hello, here is my first instructable so bare with me. I hope this helps someone else have a lot less issues then i had. My family and i are MPG snobs to put short. We Trike nearly everywhere, when possible on our Recumbent Trikes. When petroleum transportation is necessary we have chosen to go with...
By: Rapturee

Continue Reading »]]>
Thu, 6 Mar 2014 21:45:53 PST
Bees tram / Bees extractor beekeeping - Trampa para abejas apicultura http://www.instructables.com/id/Bees-tram-Bees-extractor-beekeeping-Trampa-para-ab/ http://cdn.instructables.com/F1C/8U3N/HSGRT6CJ/F1C8U3NHSGRT6CJ.SQUARE2.jpg http://cdn.instructables.com/F1C/8U3N/HSGRT6CJ/F1C8U3NHSGRT6CJ.SQUARE.jpg http://cdn.instructables.com/F1C/8U3N/HSGRT6CJ/F1C8U3NHSGRT6CJ.SMALL.jpg ivan_s So  simple  trap , util  to use    in   honey extraction  room . The  bees  go  to  the  light  and   go  out  of  the room. La   solucion  surgio   mediante  la  necesidad  de  sacar     las   abejas  de la  sala  de  extraccion de   miel .  Se  me  ocurrio  esta  idea  fucionando  la  atraccion d...
By: ivan_s

Continue Reading »]]>
Thu, 6 Mar 2014 18:03:26 PST
Coffee Table Akatsuki http://www.instructables.com/id/Coffee-Table-Akatsuki/ http://cdn.instructables.com/F9Q/F85S/HSE91PGR/F9QF85SHSE91PGR.SQUARE2.jpg http://cdn.instructables.com/F9Q/F85S/HSE91PGR/F9QF85SHSE91PGR.SQUARE.jpg http://cdn.instructables.com/F9Q/F85S/HSE91PGR/F9QF85SHSE91PGR.SMALL.jpg sharkdanger A flat packed coffee table Can be made with CNC or Laser cutter No Nails or screws required yes i know this does not have instructions, which is why i made it in "Instructable photos" section. you can find my other works at https://www.behance.net/Patricktran http://gloopgloop.deviantart.com/
By: sharkdanger

Continue Reading »]]>
Wed, 5 Mar 2014 07:07:52 PST