http://www.instructables.com Wed, 22 May 2013 17:22:22 PDT BLOX v1.01 http://www.instructables.com/id/Simple-Iphone-stand-from-8mm-plexiglass/ http://www.instructables.com/files/deriv/F8C/59XS/HGH6JO5U/F8C59XSHGH6JO5U.SQUARE2.jpg http://www.instructables.com/files/deriv/F8C/59XS/HGH6JO5U/F8C59XSHGH6JO5U.SQUARE.jpg http://www.instructables.com/files/deriv/F8C/59XS/HGH6JO5U/F8C59XSHGH6JO5U.SMALL.jpg wallemannen Here is a simple Iphone stand I made from a scrap pice of 8mm plexiglass. It made of two parts plexiglass and a sheap  iphone cord. It´s made on a scrollsaw and I just winged it, so there is no mesurements och plans. I just put some painters tape on the glass to have something to draw on (and the ta...
By: wallemannen

Continue Reading »]]> Fri, 17 May 2013 01:47:05 PDT http://www.instructables.com/id/Beats-by-Dre-Tours-35mm-Jack-Rebuild/ http://www.instructables.com/files/deriv/F26/2XO5/GLPH1LQO/F262XO5GLPH1LQO.SQUARE2.jpg http://www.instructables.com/files/deriv/F26/2XO5/GLPH1LQO/F262XO5GLPH1LQO.SQUARE.jpg http://www.instructables.com/files/deriv/F26/2XO5/GLPH1LQO/F262XO5GLPH1LQO.SMALL.jpg li.c.reated This are fake Tours that I got from a friend. I just wanted to challenge myself and see if I could repair them. I took the headphone jack from a pair of broken Apple earbuds and spliced them with the Tours. They work pretty good and it's a right angle jack.
By: li.c.reated

Continue Reading »]]> Sat, 4 May 2013 12:31:43 PDT http://www.instructables.com/id/TURF-Charging-Station-iPodiPhone/ http://www.instructables.com/files/deriv/FRU/TXB6/HFSH4WRJ/FRUTXB6HFSH4WRJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FRU/TXB6/HFSH4WRJ/FRUTXB6HFSH4WRJ.SQUARE.jpg http://www.instructables.com/files/deriv/FRU/TXB6/HFSH4WRJ/FRUTXB6HFSH4WRJ.SMALL.jpg Sreyo Hey guys! Today I'm gonna be showing you my custom made turf charging station for my iPod Touch! I made it using A two-by-four, nails, stain, and A sample from the local Lowes. Then I just built the box, stained it, drilled a hole in the back, put the turf in, and it was ready to go! If you want t...
By: Sreyo

Continue Reading »]]> Mon, 22 Apr 2013 17:34:08 PDT http://www.instructables.com/id/How-to-Capture-a-Screenshot-in-Mac-OS-X/ http://www.instructables.com/files/deriv/F1E/9ME1/HFD17YUU/F1E9ME1HFD17YUU.SQUARE2.jpg http://www.instructables.com/files/deriv/F1E/9ME1/HFD17YUU/F1E9ME1HFD17YUU.SQUARE.jpg http://www.instructables.com/files/deriv/F1E/9ME1/HFD17YUU/F1E9ME1HFD17YUU.SMALL.jpg fungus amungus Capturing a screenshot on OS X is something that I use on an incredibly regular basis. It's super useful to get an image of a website or an image or even just a part of an image. This makes it a lot easier to share ideas with others. So how to do it? Use keyboard commands! When buttons are connecte...
By: fungus amungus

Continue Reading »]]> Mon, 15 Apr 2013 21:22:23 PDT http://www.instructables.com/id/Simplest-Ipad-Stand-using-CDDVD-Spindle/ http://www.instructables.com/files/deriv/F7Q/B87L/HFBKA0TL/F7QB87LHFBKA0TL.SQUARE2.jpg http://www.instructables.com/files/deriv/F7Q/B87L/HFBKA0TL/F7QB87LHFBKA0TL.SQUARE.jpg http://www.instructables.com/files/deriv/F7Q/B87L/HFBKA0TL/F7QB87LHFBKA0TL.SMALL.jpg cedrichugh Simple stand using CD spindle
By: cedrichugh

Continue Reading »]]> Wed, 10 Apr 2013 09:04:06 PDT http://www.instructables.com/id/Ipad-Mini-Dock/ http://www.instructables.com/files/deriv/FNW/MJIA/HF23T0RC/FNWMJIAHF23T0RC.SQUARE2.jpg http://www.instructables.com/files/deriv/FNW/MJIA/HF23T0RC/FNWMJIAHF23T0RC.SQUARE.jpg http://www.instructables.com/files/deriv/FNW/MJIA/HF23T0RC/FNWMJIAHF23T0RC.SMALL.jpg edwardjinks0206 Take a block of wood length 9-10 cm roughly and 2 cm thick Measure in from the end you want to be the front half a cm. Take a file and file down roughly 1 cm so there is a divot in the block of wood now make this hole about 1 cm length ways or more depending what angle you want your ipad mini to ...
By: edwardjinks0206

Continue Reading »]]> Wed, 3 Apr 2013 03:18:52 PDT http://www.instructables.com/id/DIY-IPhone-IPod-IPad-Magnetic-card-reader/ http://www.instructables.com/files/deriv/F00/AXVN/HDHW52JE/F00AXVNHDHW52JE.SQUARE2.jpg http://www.instructables.com/files/deriv/F00/AXVN/HDHW52JE/F00AXVNHDHW52JE.SQUARE.jpg http://www.instructables.com/files/deriv/F00/AXVN/HDHW52JE/F00AXVNHDHW52JE.SMALL.jpg 159753
By: 159753

Continue Reading »]]> Mon, 25 Feb 2013 15:53:30 PST http://www.instructables.com/id/Rapid-Racing-iPad-App/ http://www.instructables.com/files/deriv/FWP/CP2I/HD4VPZ8G/FWPCP2IHD4VPZ8G.SQUARE2.jpg http://www.instructables.com/files/deriv/FWP/CP2I/HD4VPZ8G/FWPCP2IHD4VPZ8G.SQUARE.jpg http://www.instructables.com/files/deriv/FWP/CP2I/HD4VPZ8G/FWPCP2IHD4VPZ8G.SMALL.jpg Gerome42 My name is Paul, I am 15 years old, and I made an app! I've been learning how to build games for the iPhone and iPad for about 3 years and just published my first iPad game to the AppStore. Check it out, its free! http://www.appstore.com/rapidracing My answers to the Make-To-Learn contest: What I ...
By: Gerome42

Continue Reading »]]> Thu, 14 Feb 2013 12:54:53 PST http://www.instructables.com/id/iPod-Touch-Sound-Amplifier-Accesory/ http://www.instructables.com/files/deriv/FC4/1L5K/HCJODF1Z/FC41L5KHCJODF1Z.SQUARE2.jpg http://www.instructables.com/files/deriv/FC4/1L5K/HCJODF1Z/FC41L5KHCJODF1Z.SQUARE.jpg http://www.instructables.com/files/deriv/FC4/1L5K/HCJODF1Z/FC41L5KHCJODF1Z.SMALL.jpg Sreyo So when I was looking through random iPod gadgets, I had a big horn on it that supposedly amplified the sound and directed it towards you. Well, I thought to myself, "Why don't I just make my own?" And that's exactly what I did. And it turned out great! It does amplify the sound by quite a bit and ...
By: Sreyo

Continue Reading »]]> Sun, 3 Feb 2013 17:18:33 PST http://www.instructables.com/id/Rite-Idea-Lending-Hand-Tablet-Stand/ http://www.instructables.com/files/deriv/FRD/IT4K/HD2RTY22/FRDIT4KHD2RTY22.SQUARE2.jpg http://www.instructables.com/files/deriv/FRD/IT4K/HD2RTY22/FRDIT4KHD2RTY22.SQUARE.jpg http://www.instructables.com/files/deriv/FRD/IT4K/HD2RTY22/FRDIT4KHD2RTY22.SMALL.jpg BILLETSURFER The Rite Idea Lending A Hand Tablet Stand has been Updated to:  iPad Stand Versatile Portable Infinite Position Designed to Last a Lifetime This project was inspired by Lifewarrior's  Zero Gravity Tablet Instructable. What I like the most about Instructable's is;  What you design today can alw...
By: BILLETSURFER

Continue Reading »]]> Sat, 26 Jan 2013 21:09:14 PST http://www.instructables.com/id/iPad-for-Bathroom-iTiolet-/ http://www.instructables.com/files/deriv/FHC/8Y3R/HC9M9CWV/FHC8Y3RHC9M9CWV.SQUARE2.jpg http://www.instructables.com/files/deriv/FHC/8Y3R/HC9M9CWV/FHC8Y3RHC9M9CWV.SQUARE.jpg http://www.instructables.com/files/deriv/FHC/8Y3R/HC9M9CWV/FHC8Y3RHC9M9CWV.SMALL.jpg RoeyLeon Hey Let's face it, we all sit considerable time of our lives in the bathroom , so why not pass it with  "comfort " this is my small  project , an iPad for the bathroom , or as i call it  the " iToilet "
By: RoeyLeon

Continue Reading »]]> Wed, 23 Jan 2013 11:03:08 PST http://www.instructables.com/id/iPad-Bed-stand-iBed-/ http://www.instructables.com/files/deriv/FHV/3I30/HCB8KME6/FHV3I30HCB8KME6.SQUARE2.jpg http://www.instructables.com/files/deriv/FHV/3I30/HCB8KME6/FHV3I30HCB8KME6.SQUARE.jpg http://www.instructables.com/files/deriv/FHV/3I30/HCB8KME6/FHV3I30HCB8KME6.SMALL.jpg RoeyLeon Hey I really did not need the next " Arm for iPad " , but after finishing it , and mounting it to the wall beside my bed ,  i found it  very useful ! you don't need to actually hold the iPad, you can swivel 360 degree , and it`s actually very handy I used one of my unused Desk light fixture. Disa...
By: RoeyLeon

Continue Reading »]]> Tue, 22 Jan 2013 12:52:54 PST http://www.instructables.com/id/iTunes-11-in-iTunes-10/ http://www.instructables.com/files/deriv/FEL/29NH/HC3PT0MQ/FEL29NHHC3PT0MQ.SQUARE2.jpg http://www.instructables.com/files/deriv/FEL/29NH/HC3PT0MQ/FEL29NHHC3PT0MQ.SQUARE.jpg http://www.instructables.com/files/deriv/FEL/29NH/HC3PT0MQ/FEL29NHHC3PT0MQ.SMALL.jpg ride on toy dude I Love the new iTunes 11 on my 08 Macbook. The "add to up next" feature is SO handy and I enjoy being able to see all of my album artwork in one pane. Unfortunately Apple decided to drop PowerPc compatibility with the update. This saddened me as I frequently use my 03 flat-panel iMac for music. So I...
By: ride on toy dude

Continue Reading »]]> Sun, 20 Jan 2013 09:37:33 PST http://www.instructables.com/id/Diy-IpodIphone-Dock-LEGO-Edition/ http://www.instructables.com/files/deriv/FBD/YYQV/HAQ39OBP/FBDYYQVHAQ39OBP.SQUARE2.jpg http://www.instructables.com/files/deriv/FBD/YYQV/HAQ39OBP/FBDYYQVHAQ39OBP.SQUARE.jpg http://www.instructables.com/files/deriv/FBD/YYQV/HAQ39OBP/FBDYYQVHAQ39OBP.SMALL.jpg Borwe This is my HOMEMADE diy Ipod Dock from Lego.. :D aids to create this Diy DOCK : Lego Blow Gun Apple cable
By: Borwe

Continue Reading »]]> Wed, 26 Dec 2012 09:34:58 PST http://www.instructables.com/id/Toy-Truck-Ipod-dock/ http://www.instructables.com/files/deriv/FZ8/EC9X/H6R3CP1E/FZ8EC9XH6R3CP1E.SQUARE2.jpg http://www.instructables.com/files/deriv/FZ8/EC9X/H6R3CP1E/FZ8EC9XH6R3CP1E.SQUARE.jpg http://www.instructables.com/files/deriv/FZ8/EC9X/H6R3CP1E/FZ8EC9XH6R3CP1E.SMALL.jpg rnazin This object is quite simple to make but it needs some subtleties. First you need a little toy-truck (made of plastic) You need also the dock adapter provided with you ipod and a cutter. The first thing to do is extend the slot of the adapter in order to put the socket (without that you'll have som...
By: rnazin

Continue Reading »]]> Thu, 6 Sep 2012 11:53:07 PDT http://www.instructables.com/id/iPad-Tablet-Universal-Stand/ http://www.instructables.com/files/deriv/FB3/4J3B/H6MER23A/FB34J3BH6MER23A.SQUARE2.jpg http://www.instructables.com/files/deriv/FB3/4J3B/H6MER23A/FB34J3BH6MER23A.SQUARE.jpg http://www.instructables.com/files/deriv/FB3/4J3B/H6MER23A/FB34J3BH6MER23A.SMALL.jpg good_as_matrix I bought the metal strip from Bunnings wharehouse. Use bench top vise to bend the measured corners keep bending till you are happy with it! This stand is very stable. Good Luck
By: good_as_matrix

Continue Reading »]]> Sun, 2 Sep 2012 20:26:30 PDT http://www.instructables.com/id/Wooden-iPod-Nano-2g/ http://www.instructables.com/files/deriv/FRN/49XA/H673D8L5/FRN49XAH673D8L5.SQUARE2.jpg http://www.instructables.com/files/deriv/FRN/49XA/H673D8L5/FRN49XAH673D8L5.SQUARE.jpg http://www.instructables.com/files/deriv/FRN/49XA/H673D8L5/FRN49XAH673D8L5.SMALL.jpg Clockwork Monkey A complete wooden casing (not case) for an iPod Nano (2nd Generation). These totally replace the factory aluminium casing. About me, I'm working to try and become a Classical Guitar maker, these are some projects that I did in my spare time. They are made using simple hand tools. I didn't use any m...
By: Clockwork Monkey

Continue Reading »]]> Mon, 27 Aug 2012 14:01:36 PDT http://www.instructables.com/id/Broken-2GB-Ipod-Nano-to-Lego-USB-flash-drive/ http://www.instructables.com/files/deriv/FY2/ZVN6/H4VQL62Q/FY2ZVN6H4VQL62Q.SQUARE2.jpg http://www.instructables.com/files/deriv/FY2/ZVN6/H4VQL62Q/FY2ZVN6H4VQL62Q.SQUARE.jpg http://www.instructables.com/files/deriv/FY2/ZVN6/H4VQL62Q/FY2ZVN6H4VQL62Q.SMALL.jpg edbersan I found this 2GB Ipod Nano at the street.  The poor thing was seriously damaged after being tortured by I-don't know-how-many-cars. I took it home and plug it in my laptop and TA-DA! it was recognized, installed and I see that it has some weird songs still on it, so I format it and take a few lego'...
By: edbersan

Continue Reading »]]> Wed, 1 Aug 2012 21:15:04 PDT http://www.instructables.com/id/iPod-Tri-pod-pictures/ http://www.instructables.com/files/deriv/FFD/Y4TN/H52FXC1C/FFDY4TNH52FXC1C.SQUARE2.jpg http://www.instructables.com/files/deriv/FFD/Y4TN/H52FXC1C/FFDY4TNH52FXC1C.SQUARE.jpg http://www.instructables.com/files/deriv/FFD/Y4TN/H52FXC1C/FFDY4TNH52FXC1C.SMALL.jpg SBDFFLS I've alays wanted a Tri-pod for my iPod touch so when I film for my Youtube channel, MySoccerEgo it'd be steady and not as shakey. Also, I didn't want to spend 20 bucks on three pieces of metal. So, I made one. Features: -Where my iPod is mounted it can move so it can film(or take pictures) verticl...
By: SBDFFLS

Continue Reading »]]> Sun, 29 Jul 2012 10:14:52 PDT http://www.instructables.com/id/Game-Boy-Advance-Dock-Italian-Version/ http://www.instructables.com/files/deriv/FZG/HG48/H4VQA0BR/FZGHG48H4VQA0BR.SQUARE2.jpg http://www.instructables.com/files/deriv/FZG/HG48/H4VQA0BR/FZGHG48H4VQA0BR.SQUARE.jpg http://www.instructables.com/files/deriv/FZG/HG48/H4VQA0BR/FZGHG48H4VQA0BR.SMALL.jpg Electronic1996 Questo é il mio dock costruito con un Game Boy Advance! Connesso con una presa usb, può ricaricare la maggior parte degli iPod/iPhone. Prossimamente la guida passo dopo passo.  
By: Electronic1996

Continue Reading »]]> Tue, 24 Jul 2012 09:10:15 PDT http://www.instructables.com/id/One-hand-tablet-holder/ http://www.instructables.com/files/deriv/F9F/01OI/H4AGD6R8/F9F01OIH4AGD6R8.SQUARE2.jpg http://www.instructables.com/files/deriv/F9F/01OI/H4AGD6R8/F9F01OIH4AGD6R8.SQUARE.jpg http://www.instructables.com/files/deriv/F9F/01OI/H4AGD6R8/F9F01OIH4AGD6R8.SMALL.jpg tintinnuntius Here's how to make a cheap band that helps keep your tablet secure when you're holding it with just one hand. YOU WILL NEED: - scissors - rubber exercise band STEP BY STEP: - Cut a rectangular piece of the rubber band about as long as the tablet and about 7cm (2.75 inch) wide. This width works w...
By: tintinnuntius

Continue Reading »]]> Fri, 6 Jul 2012 05:55:33 PDT http://www.instructables.com/id/Technico-780-Stylus/ http://www.instructables.com/files/deriv/FEM/1QE2/H3XMT4JR/FEM1QE2H3XMT4JR.SQUARE2.jpg http://www.instructables.com/files/deriv/FEM/1QE2/H3XMT4JR/FEM1QE2H3XMT4JR.SQUARE.jpg http://www.instructables.com/files/deriv/FEM/1QE2/H3XMT4JR/FEM1QE2H3XMT4JR.SMALL.jpg Jason Bedard I love the Staedtler Technico 780 lead holder (mechanical pencil).  It has good weight, balance, and the metal knurled grip just feels great. I don't so much love the stylus designs available in the local retail market. While I have seen many amazing stylus designs on kickstarter.com, they are all...
By: Jason Bedard

Continue Reading »]]> Wed, 27 Jun 2012 16:01:24 PDT http://www.instructables.com/id/Macbook-Pro-Venting-Experiment/ http://www.instructables.com/files/deriv/F3D/I91R/H3QEXLLB/F3DI91RH3QEXLLB.SQUARE2.jpg http://www.instructables.com/files/deriv/F3D/I91R/H3QEXLLB/F3DI91RH3QEXLLB.SQUARE.jpg http://www.instructables.com/files/deriv/F3D/I91R/H3QEXLLB/F3DI91RH3QEXLLB.SMALL.jpg dannician My 5 year old macbook pro has always run hot and had burned through two I/O board.   I got sick of it so I took to venting it myself. I tore the whole thing downto the bottom tray, marked it with a pencil and strait edge, taped some graph paper down and started drilling holes. I took care not to dri...
By: dannician

Continue Reading »]]> Mon, 25 Jun 2012 11:45:51 PDT http://www.instructables.com/id/Papercraft-iPhone-4S/ http://www.instructables.com/files/deriv/FEB/BJ9Y/H2WESTTC/FEBBJ9YH2WESTTC.SQUARE2.jpg http://www.instructables.com/files/deriv/FEB/BJ9Y/H2WESTTC/FEBBJ9YH2WESTTC.SQUARE.jpg http://www.instructables.com/files/deriv/FEB/BJ9Y/H2WESTTC/FEBBJ9YH2WESTTC.SMALL.jpg Whats a Paper Tiger This is a tragic, yet very trues story about a computer programmer named Brando and how his fandom for Apple products led to his early demise. Once upon a time in the land of Apple HQ, Cupertino CA, there lived a young man computer engineer named Brando.  The day was Brando's 23rd birthday and on i...
By: Whats a Paper Tiger

Continue Reading »]]> Sun, 3 Jun 2012 17:16:29 PDT http://www.instructables.com/id/Apple-Family-Vehicle-Stickers/ http://www.instructables.com/files/deriv/FP2/ARO3/H2MYK439/FP2ARO3H2MYK439.SQUARE2.jpg http://www.instructables.com/files/deriv/FP2/ARO3/H2MYK439/FP2ARO3H2MYK439.SQUARE.jpg http://www.instructables.com/files/deriv/FP2/ARO3/H2MYK439/FP2ARO3H2MYK439.SMALL.jpg coregeek Almost 2 years ago my wife mentioned that she wanted some of those “family stickers” that had become popular on family haulers (aka minivans). At the time the only type I had seen were Disneyland themed. We’re okay with Disney but I wanted something that showed off our particular flavor of family. T...
By: coregeek

Continue Reading »]]> Sat, 26 May 2012 11:37:34 PDT http://www.instructables.com/id/Paper-iphone-dock/ http://www.instructables.com/files/deriv/FNU/VDXV/H1YONGJB/FNUVDXVH1YONGJB.SQUARE2.jpg http://www.instructables.com/files/deriv/FNU/VDXV/H1YONGJB/FNUVDXVH1YONGJB.SQUARE.jpg http://www.instructables.com/files/deriv/FNU/VDXV/H1YONGJB/FNUVDXVH1YONGJB.SMALL.jpg Mahmoud Alaa This is my second paper iphone dock made from a box and sheet Of paper and there is a iphone cable in it
By: Mahmoud Alaa

Continue Reading »]]> Sun, 13 May 2012 05:50:30 PDT http://www.instructables.com/id/Make-Apple-headphone-in-ear/ http://www.instructables.com/files/deriv/FLH/9DDO/H1JUHIIK/FLH9DDOH1JUHIIK.SQUARE2.jpg http://www.instructables.com/files/deriv/FLH/9DDO/H1JUHIIK/FLH9DDOH1JUHIIK.SQUARE.jpg http://www.instructables.com/files/deriv/FLH/9DDO/H1JUHIIK/FLH9DDOH1JUHIIK.SMALL.jpg FetterChiller I really like the look of the Apple headphones. And also the cables are quite good and don't mess up to easily. But I really don't like how they feel in my ears. They just start to hurt after a few hours, and as an acute music addict I am that is not acceptable! :P So I decided to make the Apple hea...
By: FetterChiller

Continue Reading »]]> Sat, 5 May 2012 10:58:20 PDT http://www.instructables.com/id/Iphone-phone-anything-holder-from-mousepad/ http://cdn.instructables.com/FVL/D2N3/H1ENC11Q/FVLD2N3H1ENC11Q.SQUARE2.jpg http://cdn.instructables.com/FVL/D2N3/H1ENC11Q/FVLD2N3H1ENC11Q.SQUARE.jpg http://cdn.instructables.com/FVL/D2N3/H1ENC11Q/FVLD2N3H1ENC11Q.SMALL.jpg Vitizop Iphone,ipod, phone, anything  holder from mousepad no scratch stable
By: Vitizop

Continue Reading »]]> Fri, 27 Apr 2012 01:25:12 PDT http://www.instructables.com/id/Mac-G4-turned-into-iPod-Dock/ http://www.instructables.com/files/deriv/F18/L3VF/H0OJ707P/F18L3VFH0OJ707P.SQUARE2.jpg http://www.instructables.com/files/deriv/F18/L3VF/H0OJ707P/F18L3VFH0OJ707P.SQUARE.jpg http://www.instructables.com/files/deriv/F18/L3VF/H0OJ707P/F18L3VFH0OJ707P.SMALL.jpg hamsammy I bought a G4 tower intending to move a legacy PC into its case. When this turned out to be more of a hassle than I had intended, I decided to build something that I had always wanted, an iPod dock that didn't sound like garbage. I'd had enough of 1-2" speakers and no power. Being a car audio guy, I...
By: hamsammy

Continue Reading »]]> Sat, 14 Apr 2012 20:11:09 PDT http://www.instructables.com/id/Jailbreaking-Advantages-VS-Disadvantages/ http://www.instructables.com/files/deriv/FDJ/AO1O/H0OIZ0JF/FDJAO1OH0OIZ0JF.SQUARE2.jpg http://www.instructables.com/files/deriv/FDJ/AO1O/H0OIZ0JF/FDJAO1OH0OIZ0JF.SQUARE.jpg http://www.instructables.com/files/deriv/FDJ/AO1O/H0OIZ0JF/FDJAO1OH0OIZ0JF.SMALL.jpg DRH1469 I jailbroke my iPod today and I will wayout the advantages and disadvantages: But first I will explain what jailbreaking does based on exerince and reading: Jailbreaking: In simple terms alterls the iOS of a device. In more technical terms it removes Apple's restrications and gives the user access ...
By: DRH1469

Continue Reading »]]> Sat, 7 Apr 2012 13:05:56 PDT http://www.instructables.com/id/iPad-eBook-format-overview-of-the-epub-file/ http://www.instructables.com/files/deriv/FXY/V6IJ/GZUAFTXM/FXYV6IJGZUAFTXM.SQUARE2.jpg http://www.instructables.com/files/deriv/FXY/V6IJ/GZUAFTXM/FXYV6IJGZUAFTXM.SQUARE.jpg http://www.instructables.com/files/deriv/FXY/V6IJ/GZUAFTXM/FXYV6IJGZUAFTXM.SMALL.jpg jeremykemp Use .epub to create eBooks and load them on iPad. See the internal structure how the pieces fit. The .epub format is free/open. It allows reflowable and resizable text, CSS decorations, .jpegs, .gif, .png but no moving images or sound. I made it at TechShop.
By: jeremykemp

Continue Reading »]]> Mon, 19 Mar 2012 11:28:47 PDT http://www.instructables.com/id/How-to-help-your-iTouchiPhone-find-its-way-home/ http://www.instructables.com/files/deriv/FMA/TKSY/GZLW4E0I/FMATKSYGZLW4E0I.SQUARE2.jpg http://www.instructables.com/files/deriv/FMA/TKSY/GZLW4E0I/FMATKSYGZLW4E0I.SQUARE.jpg http://www.instructables.com/files/deriv/FMA/TKSY/GZLW4E0I/FMATKSYGZLW4E0I.SMALL.jpg black hole Credit for this goes to Kiteman, and his 'ible 'How to make your iPod more secure'. It's an excellent idea, but I also wanted to have a picture of something that I liked. Here's the solution. Go to itunes, app store, whatever, and find "Picture Studio."  Download it. Open it and choose your picture...
By: black hole

Continue Reading »]]> Sun, 11 Mar 2012 13:51:48 PDT http://www.instructables.com/id/Ipad-2-laser-cut-stand/ http://www.instructables.com/files/deriv/FRI/B5SB/GZDY7AH6/FRIB5SBGZDY7AH6.SQUARE2.jpg http://www.instructables.com/files/deriv/FRI/B5SB/GZDY7AH6/FRIB5SBGZDY7AH6.SQUARE.jpg http://www.instructables.com/files/deriv/FRI/B5SB/GZDY7AH6/FRIB5SBGZDY7AH6.SMALL.jpg Samuel Bernier This Instructables is easy and SOOOO useful. A good, cheap and simple stand for your Ipad 2.  I mostly use my Ipad for Skype and for the calculator Application. I need it to be facing me and I don't always have an extra hand for it. All you need is a 4mm sheet of Acrylic and a laser cutter. Wood wil...
By: Samuel Bernier

Continue Reading »]]> Sun, 4 Mar 2012 15:57:54 PST http://www.instructables.com/id/Ipod-CoverCase-Cheap-Easy-Toilet-Paper-Roll-/ http://www.instructables.com/files/deriv/FTQ/74N4/GZ6I5G01/FTQ74N4GZ6I5G01.SQUARE2.jpg http://www.instructables.com/files/deriv/FTQ/74N4/GZ6I5G01/FTQ74N4GZ6I5G01.SQUARE.jpg http://www.instructables.com/files/deriv/FTQ/74N4/GZ6I5G01/FTQ74N4GZ6I5G01.SMALL.jpg ktow Here's a really fast, easy, and free cover for your ipod touch. Get toilet paper tube. Smash it in half. Insert ipod touch. If you want a snazzy look to it- decorate the outside. The dimensions ( if you're printing something out ) are about 4 1/4" tall and about 5" around (wide).
By: ktow

Continue Reading »]]> Tue, 28 Feb 2012 20:04:49 PST http://www.instructables.com/id/Convert-a-Macbook-Pro-into-an-iMac/ http://www.instructables.com/files/deriv/FGS/VXMJ/GYQFMVXZ/FGSVXMJGYQFMVXZ.SQUARE2.jpg http://www.instructables.com/files/deriv/FGS/VXMJ/GYQFMVXZ/FGSVXMJGYQFMVXZ.SQUARE.jpg http://www.instructables.com/files/deriv/FGS/VXMJ/GYQFMVXZ/FGSVXMJGYQFMVXZ.SMALL.jpg crypticknight Let's say you have a broken screen on a macbook pro. You could simply buy a replacement screen for under $100 and fix it yourself. However if you have a broken screen and display assembly the options are pretty limited. A replacement assembly and LCD can run you close to $800 if you have an aging ma...
By: crypticknight

Continue Reading »]]> Tue, 21 Feb 2012 10:14:53 PST http://www.instructables.com/id/i-pad-mod-for-tempel-run/ http://www.instructables.com/files/deriv/FEY/TG6S/GYQES35U/FEYTG6SGYQES35U.SQUARE2.jpg http://www.instructables.com/files/deriv/FEY/TG6S/GYQES35U/FEYTG6SGYQES35U.SQUARE.jpg http://www.instructables.com/files/deriv/FEY/TG6S/GYQES35U/FEYTG6SGYQES35U.SMALL.jpg slenderboy this mod takes about  1 minuet and cost about 2 bucks and its an awsome charecter for tempel run and its 3d.
By: slenderboy

Continue Reading »]]> Sun, 19 Feb 2012 10:41:39 PST http://www.instructables.com/id/Hardware-store-sourced-car-iPad-tablet-mount-for-/ http://www.instructables.com/files/deriv/FAJ/ESBV/GXL5XMCS/FAJESBVGXL5XMCS.SQUARE2.jpg http://www.instructables.com/files/deriv/FAJ/ESBV/GXL5XMCS/FAJESBVGXL5XMCS.SQUARE.jpg http://www.instructables.com/files/deriv/FAJ/ESBV/GXL5XMCS/FAJESBVGXL5XMCS.SMALL.jpg mensley I hacked together an automotive iPad mount for build using materials found at my local hardware store. I build this back in the summer of 2010 and it has been nothing short of awesome. I use the iPad as a source for my vehicle's music and navigation needs. (MotionX and Pandora are my in car go to ap...
By: mensley

Continue Reading »]]> Thu, 19 Jan 2012 15:18:01 PST http://www.instructables.com/id/2-Dollar-iphone-Stand/ http://www.instructables.com/files/deriv/F1I/ZM1A/GW88LDG0/F1IZM1AGW88LDG0.SQUARE2.jpg http://www.instructables.com/files/deriv/F1I/ZM1A/GW88LDG0/F1IZM1AGW88LDG0.SQUARE.jpg http://www.instructables.com/files/deriv/F1I/ZM1A/GW88LDG0/F1IZM1AGW88LDG0.SMALL.jpg bld0112 Requirement: 1x small metal bookshelf stopper 1x cork board I dont think I need words to explain. But here is the steps: 1. Bend the bookstand. 2. Attach the cork board on it with quick dry bond. I bent the metal with my hand, its easy.
By: bld0112

Continue Reading »]]> Sun, 18 Dec 2011 22:49:07 PST http://www.instructables.com/id/DIY-Macbook-Pro-Tablet/ http://www.instructables.com/files/deriv/F0U/JNCP/GW89LTP1/F0UJNCPGW89LTP1.SQUARE2.jpg http://www.instructables.com/files/deriv/F0U/JNCP/GW89LTP1/F0UJNCPGW89LTP1.SQUARE.jpg http://www.instructables.com/files/deriv/F0U/JNCP/GW89LTP1/F0UJNCPGW89LTP1.SMALL.jpg hackitbuildit This was my attempt at building a useable macbook pro tablet style device The experience of using it was overall good. The 2 downsides to the tablet was the lack of muilt-touch support of the touch screen and the weight. How it was built What I did was to take a 17inch macbook pro take it...
By: hackitbuildit

Continue Reading »]]> Fri, 16 Dec 2011 04:35:00 PST http://www.instructables.com/id/DVI-to-ADC-converter/ http://www.instructables.com/files/deriv/FAE/IJ7W/GVP28XT0/FAEIJ7WGVP28XT0.SQUARE2.jpg http://www.instructables.com/files/deriv/FAE/IJ7W/GVP28XT0/FAEIJ7WGVP28XT0.SQUARE.jpg http://www.instructables.com/files/deriv/FAE/IJ7W/GVP28XT0/FAEIJ7WGVP28XT0.SMALL.jpg alex_mp This is my first instructable and although I have no experience whatsoever, I thought that it would be nice to contribute since I have been a frequent user for a long time. I decided about a month ago that a second or third screen would be a nice addition to my computer set up and started looking fo...
By: alex_mp

Continue Reading »]]> Sun, 4 Dec 2011 10:32:43 PST http://www.instructables.com/id/Ipad-Juke-Box-MAKE-IT-GLOW-CHALLENGE/ http://www.instructables.com/files/deriv/FPP/7VPS/GV5S5JRU/FPP7VPSGV5S5JRU.SQUARE2.jpg http://www.instructables.com/files/deriv/FPP/7VPS/GV5S5JRU/FPP7VPSGV5S5JRU.SQUARE.jpg http://www.instructables.com/files/deriv/FPP/7VPS/GV5S5JRU/FPP7VPSGV5S5JRU.SMALL.jpg rushn_79 Hi, I built this juke box for my lovely wife a while back. She re-decorated our breakfast nook with 50's stuff, so a juke box seemed like a good addition. http://forum.arcadecontrols.com/ provided a great deal of inspiration. Unfortunately, no pics were taken during my build, so I'm publishing the...
By: rushn_79

Continue Reading »]]> Sat, 19 Nov 2011 15:32:48 PST http://www.instructables.com/id/I-podI-PhoneI-Pad-stylus/ http://www.instructables.com/files/deriv/FWW/QTKL/GV5S5IWD/FWWQTKLGV5S5IWD.SQUARE2.jpg http://www.instructables.com/files/deriv/FWW/QTKL/GV5S5IWD/FWWQTKLGV5S5IWD.SQUARE.jpg http://www.instructables.com/files/deriv/FWW/QTKL/GV5S5IWD/FWWQTKLGV5S5IWD.SMALL.jpg will1010 I never got tired of playing with my i pod but i did get tired of using my finger.  I looked up Ipod stylus and found one for 30$!  Way to expensive so i diced to make my own I experimented with tinfoil because people use to make them out of that but it never worked for me so I took a battery and it...
By: will1010

Continue Reading »]]> Sat, 19 Nov 2011 10:24:43 PST http://www.instructables.com/id/Jailbreaking-Your-iDevice-421-firmware/ http://www.instructables.com/files/deriv/FS5/5967/GV279NYY/FS55967GV279NYY.SQUARE2.jpg http://www.instructables.com/files/deriv/FS5/5967/GV279NYY/FS55967GV279NYY.SQUARE.jpg http://www.instructables.com/files/deriv/FS5/5967/GV279NYY/FS55967GV279NYY.SMALL.jpg instructabeginner NOTE: These are not my photos. Though I have jailbroken mine, I lost my camera... I'm sorry I have no photos. No cameras available.                   Anyway, on with the jailbreak. OK, First, you need to go to settings, then General, then you hit About. OK. Once you have hit About, scroll down to...
By: instructabeginner

Continue Reading »]]> Wed, 16 Nov 2011 16:54:11 PST http://www.instructables.com/id/FREE-TripodGorillapod-iPhone-adaptor/ http://www.instructables.com/files/deriv/FFN/OBYG/GUM34OAO/FFNOBYGGUM34OAO.SQUARE2.jpg http://www.instructables.com/files/deriv/FFN/OBYG/GUM34OAO/FFNOBYGGUM34OAO.SQUARE.jpg http://www.instructables.com/files/deriv/FFN/OBYG/GUM34OAO/FFNOBYGGUM34OAO.SMALL.jpg Vijster1 I haven't seen many iPhone tripod adaptors (except for those on instructables), and I wanted to make my own. I was in a hurry, and needed something sturdy, simple, and easy to make. I recalled the robust packaging that my iPhone came in, and at that very moment, I knew what I was going to use. This ...
By: Vijster1

Continue Reading »]]> Sat, 5 Nov 2011 23:57:37 PDT http://www.instructables.com/id/Quick-n-dirty-Stylus-for-iPad-or-iPhone/ http://www.instructables.com/files/deriv/FTI/A8Y5/GUKAXNT6/FTIA8Y5GUKAXNT6.SQUARE2.jpg http://www.instructables.com/files/deriv/FTI/A8Y5/GUKAXNT6/FTIA8Y5GUKAXNT6.SQUARE.jpg http://www.instructables.com/files/deriv/FTI/A8Y5/GUKAXNT6/FTIA8Y5GUKAXNT6.SMALL.jpg peterbryenton £££s & $$$s I couldn't believe the outrageous retail price of an "electric finger" when I looked for a stylus for my iPad. All similar "capacitive" touch-screen devices work in much the same way, so I made a zero-cost, quick 'n dirty stylus, just to see how it behaved. It worked well and I saved ...
By: peterbryenton

Continue Reading »]]> Fri, 4 Nov 2011 07:04:09 PDT http://www.instructables.com/id/Keyboard-iPod-dock-1/ http://www.instructables.com/files/deriv/F29/WJN0/GUDUNC0D/F29WJN0GUDUNC0D.SQUARE2.jpg http://www.instructables.com/files/deriv/F29/WJN0/GUDUNC0D/F29WJN0GUDUNC0D.SQUARE.jpg http://www.instructables.com/files/deriv/F29/WJN0/GUDUNC0D/F29WJN0GUDUNC0D.SMALL.jpg patush I just took the back off my keyboard, cut a hole big enough for the 30 pin adapter, fed the iPod wire to the middle, and screwed the back on again. You may want to use a USB extender for the iPod cable if you have a pc under your desk, as it is quite short. Also wait around half an hour for the su...
By: patush

Continue Reading »]]> Sun, 30 Oct 2011 12:08:14 PDT http://www.instructables.com/id/Touchscreen-I-pod-Nano-Disguise-Case/ http://www.instructables.com/files/deriv/FSW/9SHB/GUBPGBT6/FSW9SHBGUBPGBT6.SQUARE2.jpg http://www.instructables.com/files/deriv/FSW/9SHB/GUBPGBT6/FSW9SHBGUBPGBT6.SQUARE.jpg http://www.instructables.com/files/deriv/FSW/9SHB/GUBPGBT6/FSW9SHBGUBPGBT6.SMALL.jpg freeza36 I took an Altoids Smalls tin, and cut the sides off. Then i attached that into a full sized Altoids tin with a hole drilled in the side. There is cloth inside the tin, to keep the ipod from rattling. There is also a place to store actual altoids so you don't get busted for having it in school.
By: freeza36

Continue Reading »]]> Sat, 29 Oct 2011 22:18:54 PDT http://www.instructables.com/id/Italianization-of-an-iPhone4-battery-charger/ http://www.instructables.com/files/deriv/F1B/PEMN/GTQVPDD4/F1BPEMNGTQVPDD4.SQUARE2.jpg http://www.instructables.com/files/deriv/F1B/PEMN/GTQVPDD4/F1BPEMNGTQVPDD4.SQUARE.jpg http://www.instructables.com/files/deriv/F1B/PEMN/GTQVPDD4/F1BPEMNGTQVPDD4.SMALL.jpg gnawa Starting from the original , here how i made my own italian wall mounted female power plug compatible iPhone4 battery charger!
By: gnawa

Continue Reading »]]> Tue, 18 Oct 2011 12:12:26 PDT http://www.instructables.com/id/Lego-iTouch-Case/ http://www.instructables.com/files/deriv/FYO/7ZAI/GTGCQPGB/FYO7ZAIGTGCQPGB.SQUARE2.jpg http://www.instructables.com/files/deriv/FYO/7ZAI/GTGCQPGB/FYO7ZAIGTGCQPGB.SQUARE.jpg http://www.instructables.com/files/deriv/FYO/7ZAI/GTGCQPGB/FYO7ZAIGTGCQPGB.SMALL.jpg Chimex14 So this is a iTouch case I made for a 4th gen iTouch. The Idea of making it an instructable and uploading it here and taking pics came after i had already gotten pretty far into it. So now I just have the end product with a bunch of pics. I would put an iTouch in there to take teh pic, but i do not ...
By: Chimex14

Continue Reading »]]> Sun, 9 Oct 2011 11:27:33 PDT http://www.instructables.com/id/Lego-iphone-charging-stand/ http://www.instructables.com/files/deriv/F8L/ZX5T/GTGCQEXU/F8LZX5TGTGCQEXU.SQUARE2.jpg http://www.instructables.com/files/deriv/F8L/ZX5T/GTGCQEXU/F8LZX5TGTGCQEXU.SQUARE.jpg http://www.instructables.com/files/deriv/F8L/ZX5T/GTGCQEXU/F8LZX5TGTGCQEXU.SMALL.jpg asherang What you need : Materials One 3rd Party 3G/3Gs Iphone stand One 6 x 8 Lego piece Two 1 x4 Lego piece One 1 x 8 lego piece One screw Tools One Cutter One penknife
By: asherang

Continue Reading »]]> Sat, 8 Oct 2011 02:09:12 PDT