Instructables: exploring - photos - electric-vehicles Sat, 4 Jul 2015 08:33:08 PDT BLOX v1.01 Electric motor bike (revised with better description) moslof88 I recently saw this mountain bike with a free sign on it, so I snatched it up and took it home and with minimal effort got it running like new again. Then I remembered i had a razor scooter motor and I decided to see if I could power the bike using only the manufacturers wheel and apply friction to ...
By: moslof88

Continue Reading »]]>
Tue, 18 Mar 2014 18:34:28 PDT
Single Wheel Transport. benmurton I have seen some one wheeled devices around and this is my ideas of using a single wheel as transport. The overall diameter is 600mm and can be ridden with a foot either side of the wheel so you are facing forward or could be ridden sideways with both feet inside the hoop, a bit like a skateboard. A...
By: benmurton

Continue Reading »]]>
Fri, 16 Aug 2013 22:03:57 PDT
Simple Electromagnetic Engine using piston and flywheel Jestin_Cubetech
By: Jestin_Cubetech

Continue Reading »]]>
Tue, 30 Jul 2013 03:55:33 PDT
Nerdy Derby LCD Screen vaultking In order to display Motor and ESC temperature, RPMs, and elapsed time, I needed a way to secure a LCD screen to a Nerdy Derby car that will be competing in the inaugural Milwaukee Makerfest  Nerdy Derby on October 19, 2013 at the Milwaukee Makerspace Since the car will be subjected to high speeds an...
By: vaultking

Continue Reading »]]>
Tue, 23 Jul 2013 08:39:17 PDT
ELECTRIC GO CART HACK THE GOOSE I bought this go cart used with no battery's or charger. its runs from 12 to 24 volts, so i took my RYOBI 18 volt  flash light apart and hooked it to the wires that went to the battery. i have a bunch of these batterys so the fun never stops, cause there is always a couple on charge. also it did not...

Continue Reading »]]>
Mon, 1 Jul 2013 16:35:12 PDT
UnderSeawolf: ROV for Long Island Sound Veteran_ComputerEngineer Hi there and thanks for stopping by,  Every now and then I get an idea for my ROV but I have been stuck for a while now as I am trying to figure out how to, compactly, rotate those thrusters you see in the image. I was thinking about designing a 2-Axis module to go in between the ROV and the Thrust...
By: Veteran_ComputerEngineer

Continue Reading »]]>
Mon, 27 May 2013 12:01:30 PDT
Self Balancing segway style scooter for under 300.00 fozz18 I've always wanted a Segway from the first day I saw one, but with the over 6000.00 price tag I couldn't afford one. Thankfully the parts required have come down in price dramatically. I managed to build one for under 300.00.  here is a list of the most important parts. 1x2" square steel on eBay bu...
By: fozz18

Continue Reading »]]>
Mon, 8 Apr 2013 19:58:57 PDT
Ev Sports car ravikumar97 This is my Submission to Jack Daniels Independence Day Contest. My age is 15 and my dad’s age is 40 10% of the world’s total carbon emissions are from road transportation. Electric cars are the potential answer to this problem. The main two reasons elect...
By: ravikumar97

Continue Reading »]]>
Mon, 3 Sep 2012 20:02:37 PDT
Electric GoKart ___ I built this electric go kart over the course of a few years.  I got the frame on Craigslist, and spent a long time restoring it.  The original frame came with a roll cage, but I removed it because it was a little to small for me.Then I bought the majority of the other components from scooter and Go...
By: ___

Continue Reading »]]>
Tue, 21 Aug 2012 07:40:44 PDT
electric car antipaxx44 taking on old dirt track car and replacing the gasoline drive line with a electric drive system from a golf cart This is a home made electric vehicle  How to build one of your own.... This particular model is from a 1940's 3/4 midget dirt track car. The best area to located them is in Pennsylvani...
By: antipaxx44

Continue Reading »]]>
Wed, 30 May 2012 10:10:31 PDT
Poor Man's Electric bike made by Recycled materials from Junkyards. numberonebikeslover Background: I am Naeem Zahid, aging 39 from Pakistan (City Peshawar). It was in me since my childhood when I sued to break my toys and make something else from them. I have no professional qualification in engineering or electronics but I have learned everything from books and mostly the Internet an...
By: numberonebikeslover

Continue Reading »]]>
Tue, 19 Apr 2011 20:56:59 PDT
Retro Electric Bike TheFullMetalAlchemist This is a custom pedal/electric bike I designed and built for school. This slideshow shows the start to finish build of the project.I am doing Metal Fabrication Engineering along side a boiler making apprenticeship. I am looking to head into custom electric motorbikes or the automotive fabrication a...
By: TheFullMetalAlchemist

Continue Reading »]]>
Sun, 6 Sep 2009 01:20:04 PDT
Electric Bike - now with chain-snapping power! nedfunnell Last weekend I decided to put a big electric motor I have onto my bike. I had all the parts already from various projects. The only parts I needed to buy were the U-bolts. The motor is a 36V PMDC motor, rated at 3.0HP ~= 2.2kW. No, I don't know where to get another one, or even who the manufacturer ...
By: nedfunnell

Continue Reading »]]>
Fri, 10 Jul 2009 21:34:45 PDT