Instructables: exploring - photos - led - lamp http://www.instructables.com Fri, 25 Jul 2014 02:50:31 PDT BLOX v1.01 Companion cube lamp that lights up when you put on the button http://www.instructables.com/id/Companion-cube-and-button-lamp/ http://cdn.instructables.com/FMF/MB0I/HT7PAX76/FMFMB0IHT7PAX76.SQUARE2.jpg http://cdn.instructables.com/FMF/MB0I/HT7PAX76/FMFMB0IHT7PAX76.SQUARE.jpg http://cdn.instructables.com/FMF/MB0I/HT7PAX76/FMFMB0IHT7PAX76.SMALL.jpg Quang Vinh I'm very sorry, I planned to create a step to step instructable, but since the game contest end, the paper contest is closing so I have to make a quick entry. Basically, It's a companion cube that light up when you put it on the button. The main power source is a small LED light that connect to a se...
By: Quang Vinh

Continue Reading »]]>
Sun, 23 Mar 2014 09:40:46 PDT
Steampunk LED Color mixer lamp http://www.instructables.com/id/Steampunk-LED-Color-mixer-lamp/ http://cdn.instructables.com/FRY/II3F/HQMN460Z/FRYII3FHQMN460Z.SQUARE2.jpg http://cdn.instructables.com/FRY/II3F/HQMN460Z/FRYII3FHQMN460Z.SQUARE.jpg http://cdn.instructables.com/FRY/II3F/HQMN460Z/FRYII3FHQMN460Z.SMALL.jpg badjer1 I decided to make an artist friend of mine a LED lamp that can mix colors and have USB charging port for their phone.  Basically it is a steampunk insulator night light that uses RGB LEDs.  The top and bottom halves can be independently lit up with RGB or white light, or turned off. I made the base...
By: badjer1

Continue Reading »]]>
Sun, 19 Jan 2014 18:53:09 PST
Patron led hanging patio lights http://www.instructables.com/id/Patron-led-hanging-patio-lights/ http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SQUARE2.jpg http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SQUARE.jpg http://cdn.instructables.com/F9A/NX5S/HO7XQKNE/F9ANX5SHO7XQKNE.SMALL.jpg ARGMISTER After doing some researching and reading on some ideas for lights for my backyard patio I came across this instructable.,..  http://www.instructables.com/id/Stylish-Half-bottle-LED-Lights/ ....well it sparked an idea and I remembered I had access to alot of patron bottles..empty already. Got a pr...
By: ARGMISTER

Continue Reading »]]>
Sun, 24 Nov 2013 18:10:20 PST
Emergency Office Flashlight Lampshade http://www.instructables.com/id/Emergency-Office-Flashlight-Lampshade/ http://cdn.instructables.com/FE2/3EOA/HNHLPSQ3/FE23EOAHNHLPSQ3.SQUARE2.jpg http://cdn.instructables.com/FE2/3EOA/HNHLPSQ3/FE23EOAHNHLPSQ3.SQUARE.jpg http://cdn.instructables.com/FE2/3EOA/HNHLPSQ3/FE23EOAHNHLPSQ3.SMALL.jpg bloomautomatic Had a power outage at work this morning. Used my LED Mag-Lite, a styrofoam cup and some tape to make a quick lampshade.  The tape kept the cup held up, the cup diffused the light nicely throughout the room.  I was very pleased with the results!
By: bloomautomatic

Continue Reading »]]>
Fri, 1 Nov 2013 13:25:14 PDT
Walnut and Aluminum Lamp http://www.instructables.com/id/Walnut-and-Aluminum-Lamp/ http://cdn.instructables.com/F9A/BZGR/HMEXSKNR/F9ABZGRHMEXSKNR.SQUARE2.jpg http://cdn.instructables.com/F9A/BZGR/HMEXSKNR/F9ABZGRHMEXSKNR.SQUARE.jpg http://cdn.instructables.com/F9A/BZGR/HMEXSKNR/F9ABZGRHMEXSKNR.SMALL.jpg NathanaelScheffler Hello Instructables! This is going to be one of my entries to the Improve Your Room Youth Design Challenge.  This project was inspired by domenic3’s LED strip lamp.  I decided to see if I could create something similar that suited my needs a little better. The changes I made to Domenic’s design ar...
By: NathanaelScheffler

Continue Reading »]]>
Sat, 5 Oct 2013 16:35:10 PDT
Vodka bottle Lamp http://www.instructables.com/id/Vodka-bottle-Lamp/ http://cdn.instructables.com/F5W/C4JE/HKZAVJV8/F5WC4JEHKZAVJV8.SQUARE2.jpg http://cdn.instructables.com/F5W/C4JE/HKZAVJV8/F5WC4JEHKZAVJV8.SQUARE.jpg http://cdn.instructables.com/F5W/C4JE/HKZAVJV8/F5WC4JEHKZAVJV8.SMALL.jpg ashuinfy You just need a spare empty VODKA bottle and one 1W or more LED lamp
By: ashuinfy

Continue Reading »]]>
Sat, 31 Aug 2013 14:34:23 PDT
Protect a bicycle light with Sugru http://www.instructables.com/id/Protect-a-bicycle-light-with-Sugru/ http://cdn.instructables.com/FEF/MDFW/HJAI2OWA/FEFMDFWHJAI2OWA.SQUARE2.jpg http://cdn.instructables.com/FEF/MDFW/HJAI2OWA/FEFMDFWHJAI2OWA.SQUARE.jpg http://cdn.instructables.com/FEF/MDFW/HJAI2OWA/FEFMDFWHJAI2OWA.SMALL.jpg Fermate My husband built a great bicycle LED light for me. The only thing missing was a good guard for the electronics - and it should look cool! I used two red Sugru packs and built it at the Sugru Build Night in our hackerspace in Oldenburg. In the pictures you see it before and after the fixing. In addi...
By: Fermate

Continue Reading »]]>
Sun, 21 Jul 2013 13:20:42 PDT
Desk lamp, Mushrooms http://www.instructables.com/id/Desk-lamp-Mushrooms/ http://cdn.instructables.com/FZ6/1TP5/HIW8OGAK/FZ61TP5HIW8OGAK.SQUARE2.jpg http://cdn.instructables.com/FZ6/1TP5/HIW8OGAK/FZ61TP5HIW8OGAK.SQUARE.jpg http://cdn.instructables.com/FZ6/1TP5/HIW8OGAK/FZ61TP5HIW8OGAK.SMALL.jpg TheFullMetalAlchemist It's been awhile since I've been able to make something for myself. Recycled motorcycle parts, hand fabricated acrylic, LEDs. http://www.facebook.com/FmaArtFabrication The main assembly is a rocker cover from a Honda Spada with a cut down crankshaft, also from the Spada. Welded to the crank are the...
By: TheFullMetalAlchemist

Continue Reading »]]>
Tue, 9 Jul 2013 01:21:49 PDT
DIY | 12v Large LED Cabin Light http://www.instructables.com/id/DIY-12-Volt-Large-Cabin-LED-Light-Fixture-with-/ http://cdn.instructables.com/F6T/HH3H/HJ39PPLH/F6THH3HHJ39PPLH.SQUARE2.jpg http://cdn.instructables.com/F6T/HH3H/HJ39PPLH/F6THH3HHJ39PPLH.SQUARE.jpg http://cdn.instructables.com/F6T/HH3H/HJ39PPLH/F6THH3HHJ39PPLH.SMALL.jpg M.Hawse $42 DIY | 12V LED Cabin Light (with wall-washer style night light) 12" Wide x 36" Long x 2 3/4" tall | 72 Watts @ 100% | I use a PWM Dimmer for a power range of 3W to 71W for use in Houseboats, RVs, Garages, Laundry Rooms, Workshops, Artist's Drawing Areas One of these is installed above each of th...
By: M.Hawse

Continue Reading »]]>
Sat, 6 Jul 2013 16:45:55 PDT
12V Sleeping Lamp http://www.instructables.com/id/12V-Sleeping-Lamp/ http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SQUARE2.jpg http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SQUARE.jpg http://cdn.instructables.com/FEH/XM0H/HH2VMZCW/FEHXM0HHH2VMZCW.SMALL.jpg ardmatrik Made of: 1. 1W smd 3.7V Cool White LED 2. Wire 3. Plastic vase 4. Hot Cup - white/fog color 5. PVC pipe 6. Slide switch Support Material & Tools: 1. Super glue/5minute 1 tonne hardex 2. Cutter 3. Mini project saw 4. Driller Mine the power supply is from 12V solar system. Total power ~4Watt
By: ardmatrik

Continue Reading »]]>
Sat, 25 May 2013 17:10:46 PDT
LED Table Lamp - Acrylic Version. I made this at TechShop http://www.instructables.com/id/LED-Table-Lamp-Acrylic-Version-I-made-this-at-/ http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SQUARE2.jpg http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SQUARE.jpg http://cdn.instructables.com/FNS/NFDS/HG85C95U/FNSNFDSHG85C95U.SMALL.jpg John_TS_DTW Background:         The 3D Printed version of this LED Table Lamp.took a while to make.  The machine time also takes longer and the material cost is also higher.  The battery bracket need to be designed sturdier.            If we take a close look at this part, we could visualize it is primarily lay...
By: John_TS_DTW

Continue Reading »]]>
Fri, 3 May 2013 00:41:20 PDT
Mini LED Table Lamp Kit. Cable-free. Solder-free. I made it at TechShop. http://www.instructables.com/id/Mini-Table-Lamp-Kit-I-made-in-TechShop/ http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SQUARE2.jpg http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SQUARE.jpg http://cdn.instructables.com/FHR/Q8Z4/HFPTMU1Z/FHRQ8Z4HFPTMU1Z.SMALL.jpg John_TS_DTW Goals:       To make a mini portable LED table lamp kit.      To design Plug and Play device.  User just plug in 6 LEDs and 6 batteries.      To learn how to use Autodesk Inventor Professional and Maker Bot - Replicator 2      To have fun working and learning at the TechShop. Procedure:   * Create ...
By: John_TS_DTW

Continue Reading »]]>
Thu, 18 Apr 2013 18:23:14 PDT
The Prospector 5000 http://www.instructables.com/id/The-Prospector-5000/ http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SQUARE2.jpg http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SQUARE.jpg http://cdn.instructables.com/FQ1/XJ4Y/HF23X1RF/FQ1XJ4YHF23X1RF.SMALL.jpg GhoustDoggy Howdy ho miners If you have ever mine in the dark  dont fear the new Ghoustdoggy's product will save the day.This  is 3.7 volt LED lamp for mining and exploration off unknown areas and places.It can be recharged by solar or reserved batterys.It can ligt for 2.5 hours .And good luck miners.
By: GhoustDoggy

Continue Reading »]]>
Sun, 7 Apr 2013 05:51:42 PDT
Spring Time Flower Mood Lamp Featuring Color Changing LED Tea Light http://www.instructables.com/id/Spring-Time-Flower-Mood-Lamp-Featuring-Color-Chang/ http://cdn.instructables.com/FK0/6OB6/HF23M995/FK06OB6HF23M995.SQUARE2.jpg http://cdn.instructables.com/FK0/6OB6/HF23M995/FK06OB6HF23M995.SQUARE.jpg http://cdn.instructables.com/FK0/6OB6/HF23M995/FK06OB6HF23M995.SMALL.jpg Peoples-Exchange This is a very simple mood light to celebrate the beginning of Spring! They can be made for  ~$1.50ea and takes only a few minutes to assemble.  It has an 80hr battery life, 7 colors and 2x CR2032 batteries.  Bill of Materials:  1. Hot Glue Gun w/ Hot Glue 2. 3D Printed Lamp Body (Available for fr...
By: Peoples-Exchange

Continue Reading »]]>
Thu, 4 Apr 2013 19:55:51 PDT
Artistic USB LED CD Lamp http://www.instructables.com/id/Artistic-USB-LED-CD-Lamp/ http://cdn.instructables.com/F29/V744/HEXS6QPZ/F29V744HEXS6QPZ.SQUARE2.jpg http://cdn.instructables.com/F29/V744/HEXS6QPZ/F29V744HEXS6QPZ.SQUARE.jpg http://cdn.instructables.com/F29/V744/HEXS6QPZ/F29V744HEXS6QPZ.SMALL.jpg SHS_PnE The materials needed for this project: 6 CDs 1.5 inch PVC pipe 3 t-joints 12 LEDS (of any colors, we used white, blue, and orange)  12 resistors 3 wire coat hangers solder soldering iron and stand electrical tape hot glue gun drill wire (red and black is used here) stereo wire It is good to first p...
By: SHS_PnE

Continue Reading »]]>
Tue, 2 Apr 2013 17:18:37 PDT
Robot Lamp made from scrap http://www.instructables.com/id/Robot-Lamp-made-from-scrap/ http://cdn.instructables.com/FQ1/BCMT/HET1B0GB/FQ1BCMTHET1B0GB.SQUARE2.jpg http://cdn.instructables.com/FQ1/BCMT/HET1B0GB/FQ1BCMTHET1B0GB.SQUARE.jpg http://cdn.instructables.com/FQ1/BCMT/HET1B0GB/FQ1BCMTHET1B0GB.SMALL.jpg Falkenberg Hi there, this is another lamp i´ve made from scrap, it´s ROBOT like. it works with an battery powered led simple handlamp wich is screwed in an acetylen bottle safty cap wich i had leftover from another project. all the other parts are scrap wich i´ve found in an metalrecycling container. the par...
By: Falkenberg

Continue Reading »]]>
Fri, 29 Mar 2013 22:56:34 PDT
Old School LED CD Lamp http://www.instructables.com/id/Old-School-LED-CD-Lamp-1/ http://cdn.instructables.com/F5L/5AW4/HEI48FHZ/F5L5AW4HEI48FHZ.SQUARE2.jpg http://cdn.instructables.com/F5L/5AW4/HEI48FHZ/F5L5AW4HEI48FHZ.SQUARE.jpg http://cdn.instructables.com/F5L/5AW4/HEI48FHZ/F5L5AW4HEI48FHZ.SMALL.jpg SHS_PnE Materials: 5 LEDs PVC 4 CDs USB Cable 5 Resistors Wire Electrical Tape Duck Tape Procedures: Drill 5 holes into a CD (large enough for an LED to fit in each) Connect the LEDs in a parallel circuit. Put LEDs in the drilled holes. Run the USB wire through the PVC and attach to the parallel circuit. H...
By: SHS_PnE

Continue Reading »]]>
Thu, 21 Mar 2013 06:30:24 PDT
Cute little desklamp made from scrap Fullmetal, Steampunk http://www.instructables.com/id/Cute-little-desklamp-made-from-scrap-Fullmetal-St/ http://cdn.instructables.com/FIU/QE8F/HEBNGX24/FIUQE8FHEBNGX24.SQUARE2.jpg http://cdn.instructables.com/FIU/QE8F/HEBNGX24/FIUQE8FHEBNGX24.SQUARE.jpg http://cdn.instructables.com/FIU/QE8F/HEBNGX24/FIUQE8FHEBNGX24.SMALL.jpg Falkenberg Hi there, So here´s another little fullmetal lamp i´ve made from scrap. -The stand is an old heater valve handle - the tube is an leftover piece of copper tube from an cargas system wich i bend in this position, it´s brazed to the stand an an old wheelnut of an vintage mini cooper wich is is braze...
By: Falkenberg

Continue Reading »]]>
Sat, 16 Mar 2013 05:53:18 PDT
robot lamp http://www.instructables.com/id/robot-lamp/ http://cdn.instructables.com/FXG/O767/HD4VGAK3/FXGO767HD4VGAK3.SQUARE2.jpg http://cdn.instructables.com/FXG/O767/HD4VGAK3/FXGO767HD4VGAK3.SQUARE.jpg http://cdn.instructables.com/FXG/O767/HD4VGAK3/FXGO767HD4VGAK3.SMALL.jpg champx Here is a simple way to make an original lamp! just take an old motorcycle headlight, use fasteners to put the legs, make holes for eyes and mouth, buy a cheap RGB LED bulb with remote control and here is a mood lighting out of the ordinary!
By: champx

Continue Reading »]]>
Thu, 21 Feb 2013 11:35:53 PST
Isotope-239 igniting agent lamp http://www.instructables.com/id/Isotope-239-igniting-agent-lamp/ http://cdn.instructables.com/FYZ/JCEM/HCJOD1CG/FYZJCEMHCJOD1CG.SQUARE2.jpg http://cdn.instructables.com/FYZ/JCEM/HCJOD1CG/FYZJCEMHCJOD1CG.SQUARE.jpg http://cdn.instructables.com/FYZ/JCEM/HCJOD1CG/FYZJCEMHCJOD1CG.SMALL.jpg GhoustDoggy For all Fallout NV fans Isotope-239 igniting agent lamp. I made this in 30 min, lamp consists of two parts: -Jar with isotope ( I used old jar and detergent) -Base  --------------------------------------------------------------------------------- Base contains LED light nad power sorce ( 9V ), For t...
By: GhoustDoggy

Continue Reading »]]>
Fri, 1 Feb 2013 12:55:36 PST
"obsolete technology" Lamp http://www.instructables.com/id/obsolete-technology-Lamp/ http://cdn.instructables.com/FMV/0GLN/HCJO4MAG/FMV0GLNHCJO4MAG.SQUARE2.jpg http://cdn.instructables.com/FMV/0GLN/HCJO4MAG/FMV0GLNHCJO4MAG.SQUARE.jpg http://cdn.instructables.com/FMV/0GLN/HCJO4MAG/FMV0GLNHCJO4MAG.SMALL.jpg Mad inventor This Is a lamp I'm making, originally inspired by an instructable that I can't find right now (edit: found it: http://www.instructables.com/id/Recycle-Old-Light-Bulbs). What I first intended, was to make the same thing only with light. but then, Inspiration stroke me when I tried filling it with wat...
By: Mad inventor

Continue Reading »]]>
Wed, 30 Jan 2013 18:28:18 PST
Wall Sconces with Hidden Weather Display and Tangible User Interface http://www.instructables.com/id/Wall-Sconces-with-Hidden-Weather-Display-and-Tangi/ http://cdn.instructables.com/FEH/BB9F/HCB8R3CN/FEHBB9FHCB8R3CN.SQUARE2.jpg http://cdn.instructables.com/FEH/BB9F/HCB8R3CN/FEHBB9FHCB8R3CN.SQUARE.jpg http://cdn.instructables.com/FEH/BB9F/HCB8R3CN/FEHBB9FHCB8R3CN.SMALL.jpg AdielFernandez Videos of project in action below!!! Disclaimer: This is an abbreviated description of the project since I did not have time to do a full step-by-step instructable in time for a contest. However, I will gladly make a step-by-step 'ible if there is enough interest. If you like it, please take a mome...
By: AdielFernandez

Continue Reading »]]>
Sun, 27 Jan 2013 20:54:45 PST
led lamp http://www.instructables.com/id/led-lamp-3/ http://cdn.instructables.com/FVO/NZD6/H673DXMP/FVONZD6H673DXMP.SQUARE2.jpg http://cdn.instructables.com/FVO/NZD6/H673DXMP/FVONZD6H673DXMP.SQUARE.jpg http://cdn.instructables.com/FVO/NZD6/H673DXMP/FVONZD6H673DXMP.SMALL.jpg zekabmf acryl led lamp
By: zekabmf

Continue Reading »]]>
Thu, 30 Aug 2012 04:16:23 PDT
Protector Disk Light Towers http://www.instructables.com/id/Protector-Disk-Light-Towers/ http://cdn.instructables.com/F9C/S2T8/H673DRZJ/F9CS2T8H673DRZJ.SQUARE2.jpg http://cdn.instructables.com/F9C/S2T8/H673DRZJ/F9CS2T8H673DRZJ.SQUARE.jpg http://cdn.instructables.com/F9C/S2T8/H673DRZJ/F9CS2T8H673DRZJ.SMALL.jpg RankineCycle This pair of lamps uses "protector disks" which are used to protect recordable CDs and DVDs on spindles. A local printing shop had tossed about 50 of them in the trash and the idea for this lamp came about. A ring of 465 nm UV LEDs shines up through the disks, lighting their edges and creating a gra...
By: RankineCycle

Continue Reading »]]>
Tue, 28 Aug 2012 21:30:21 PDT
Giant Honeycomb Chandelier (now with simplified instructions!) http://www.instructables.com/id/Giant-Honeycomb-Chandelier/ http://cdn.instructables.com/FKI/LUMG/GY18RDB0/FKILUMGGY18RDB0.SQUARE2.jpg http://cdn.instructables.com/FKI/LUMG/GY18RDB0/FKILUMGGY18RDB0.SQUARE.jpg http://cdn.instructables.com/FKI/LUMG/GY18RDB0/FKILUMGGY18RDB0.SMALL.jpg davidandora See Step-by-Step version of this Instructable clicking HERE: http://www.instructables.com/id/Giant-Honeycomb-Chandelier-1 This instructable is our effort to win the most awesome grand prize for the Shopbot contest. I am part of a very small group of friends, artists and creative engineers who are...
By: davidandora

Continue Reading »]]>
Wed, 1 Feb 2012 15:48:51 PST
Fancy up an Ikea desk light http://www.instructables.com/id/Fancy-up-an-Ikea-desk-light/ http://cdn.instructables.com/FO8/2VF5/GXL664QU/FO82VF5GXL664QU.SQUARE2.jpg http://cdn.instructables.com/FO8/2VF5/GXL664QU/FO82VF5GXL664QU.SQUARE.jpg http://cdn.instructables.com/FO8/2VF5/GXL664QU/FO82VF5GXL664QU.SMALL.jpg janern So, first of all, this is my first publication on this wonderful website. It's not a step by step thing, because i didn't take pictures along the way ( i made it some time ago). I made an old Ikea lamp look a lot cooler, in my humble opinion, by using parts from a newer ikea lamp, the Jansjö work l...
By: janern

Continue Reading »]]>
Fri, 20 Jan 2012 00:49:15 PST
Repurpose a lamp with LEDs http://www.instructables.com/id/Repurpose-a-lamp-with-LEDs/ http://cdn.instructables.com/FYU/BDQC/GVLRXSNU/FYUBDQCGVLRXSNU.SQUARE2.jpg http://cdn.instructables.com/FYU/BDQC/GVLRXSNU/FYUBDQCGVLRXSNU.SQUARE.jpg http://cdn.instructables.com/FYU/BDQC/GVLRXSNU/FYUBDQCGVLRXSNU.SMALL.jpg shaunsund How I Recycled an Old Florescent Tube Lamp to use LEDs. I had a great lamp that had a florescent "Pure White' -type of bulb. It worked great - until the ballast up and died on me. Rather than throw it away and find a new one, I decided to break out the old soldering iron and hack it with a few LED...
By: shaunsund

Continue Reading »]]>
Sat, 3 Dec 2011 18:53:27 PST
LED Reading Pad http://www.instructables.com/id/LED-Reading-Pad/ http://cdn.instructables.com/FZT/0J4G/GSUSNM3C/FZT0J4GGSUSNM3C.SQUARE2.jpg http://cdn.instructables.com/FZT/0J4G/GSUSNM3C/FZT0J4GGSUSNM3C.SQUARE.jpg http://cdn.instructables.com/FZT/0J4G/GSUSNM3C/FZT0J4GGSUSNM3C.SMALL.jpg slwthr This is very use full for when you are camping or when you want to read anything in dark lighting situation like a story book or Map's. Size : 297mm x 210mm (near A4 page size) Components : *Acrylic Sheet (297mm x 210mm) *Mobile phone keypad LED's *3.7V Li-ion mobile phone battery *Nokia phone cha...
By: slwthr

Continue Reading »]]>
Tue, 27 Sep 2011 23:44:23 PDT
Paper Cube Night Light http://www.instructables.com/id/Paper-Cube-Night-Light/ http://cdn.instructables.com/FBA/A2UR/GSNQES2H/FBAA2URGSNQES2H.SQUARE2.jpg http://cdn.instructables.com/FBA/A2UR/GSNQES2H/FBAA2URGSNQES2H.SQUARE.jpg http://cdn.instructables.com/FBA/A2UR/GSNQES2H/FBAA2URGSNQES2H.SMALL.jpg colorex A paper cube night light.
By: colorex

Continue Reading »]]>
Tue, 20 Sep 2011 17:04:55 PDT
LED mini table or desk lamp http://www.instructables.com/id/LED-mini-table-or-desk-lamp/ http://cdn.instructables.com/FIT/2DIZ/GSI522Z0/FIT2DIZGSI522Z0.SQUARE2.jpg http://cdn.instructables.com/FIT/2DIZ/GSI522Z0/FIT2DIZGSI522Z0.SQUARE.jpg http://cdn.instructables.com/FIT/2DIZ/GSI522Z0/FIT2DIZGSI522Z0.SMALL.jpg jmengel We've got an office nook that has some high powered (200W) halogen lighting overhead that is too much for simple working on the computer at night but I don't like having the LCD monitor as the only light especially as our keyboard isn't lighted.  Faced with such a conundrum I came up with the pictur...
By: jmengel

Continue Reading »]]>
Mon, 12 Sep 2011 19:26:49 PDT
A cool little design lamp. http://www.instructables.com/id/A-cool-little-design-lamp/ http://cdn.instructables.com/FIJ/J0VY/GLL4Y6FI/FIJJ0VYGLL4Y6FI.SQUARE2.jpg http://cdn.instructables.com/FIJ/J0VY/GLL4Y6FI/FIJJ0VYGLL4Y6FI.SQUARE.jpg http://cdn.instructables.com/FIJ/J0VY/GLL4Y6FI/FIJJ0VYGLL4Y6FI.SMALL.jpg Ollaolen This time I made a cool little lamp. This project was really simple and it doesn't really need step by step instructions. I used for this project : Osram dot-it lamp - 1$ An old headset box - the tube part of the lamp A piece of keyboard PCB Hotglue I first demolished the osram lamp and took out th...
By: Ollaolen

Continue Reading »]]>
Tue, 22 Mar 2011 13:53:57 PDT
RGB Led Lamp with IR Control http://www.instructables.com/id/RGB-Led-Lamp/ http://cdn.instructables.com/FVM/1THL/GFKVB9G0/FVM1THLGFKVB9G0.SQUARE2.jpg http://cdn.instructables.com/FVM/1THL/GFKVB9G0/FVM1THLGFKVB9G0.SQUARE.jpg http://cdn.instructables.com/FVM/1THL/GFKVB9G0/FVM1THLGFKVB9G0.SMALL.jpg clear_bystander Create a wonderful lamp which can change color with a RGB Led strip and a controller. The lamp comes from IKEA and cost 15 Euro, I simply removed the lamp holder from it and feed the cable from the controller through the hole at the bottom of the "vase". The RGB Strips can be found on e-bay. The s...
By: clear_bystander

Continue Reading »]]>
Fri, 22 Oct 2010 16:25:32 PDT
Sun Light http://www.instructables.com/id/Sun-Light/ http://cdn.instructables.com/F1N/O6RK/GF5IRXGB/F1NO6RKGF5IRXGB.SQUARE2.jpg http://cdn.instructables.com/F1N/O6RK/GF5IRXGB/F1NO6RKGF5IRXGB.SQUARE.jpg http://cdn.instructables.com/F1N/O6RK/GF5IRXGB/F1NO6RKGF5IRXGB.SMALL.jpg makerdan Introduction: I found this great light fixture at a sale I was at, and I knew that I had to make something cool with it!  This project is called "Sun Light" because I built it with the colors of the Sun in mind (red for the core, then orange, then finally yellow on the outside).  I used a transform...
By: makerdan

Continue Reading »]]>
Mon, 11 Oct 2010 13:45:25 PDT
Artifact #47: my gift exchange http://www.instructables.com/id/Artifact-47-my-gift-exchange/ http://cdn.instructables.com/FWE/QQH8/GCF14W5X/FWEQQH8GCF14W5X.SQUARE2.jpg http://cdn.instructables.com/FWE/QQH8/GCF14W5X/FWEQQH8GCF14W5X.SQUARE.jpg http://cdn.instructables.com/FWE/QQH8/GCF14W5X/FWEQQH8GCF14W5X.SMALL.jpg PKM I didn't really know what to make for the gift exchange, so started from the point "I want to make something that lights up" and "I have a box of electronic bits and the usual craft materials to hand" and pretty much made this device up as I went along.  I'm sure Jake could come up with a more convi...
By: PKM

Continue Reading »]]>
Tue, 3 Aug 2010 13:34:40 PDT
Make a simple LED-Lamp http://www.instructables.com/id/Make-a-simple-LED-Lamp/ http://cdn.instructables.com/F4X/50S2/FPWWW9DZ/F4X50S2FPWWW9DZ.SQUARE2.jpg http://cdn.instructables.com/F4X/50S2/FPWWW9DZ/F4X50S2FPWWW9DZ.SQUARE.jpg http://cdn.instructables.com/F4X/50S2/FPWWW9DZ/F4X50S2FPWWW9DZ.SMALL.jpg BrookeAaren instructable about how to make a very easy LED-Lamp in about 30 seconds using a laptop buffer-battery.
By: BrookeAaren

Continue Reading »]]>
Fri, 16 Jan 2009 13:53:55 PST
UV LED Pin Art Lamp http://www.instructables.com/id/UV-LED-Pin-Art-Lamp/ http://cdn.instructables.com/F8M/PPCO/FOVXPHDF/F8MPPCOFOVXPHDF.SQUARE2.jpg http://cdn.instructables.com/F8M/PPCO/FOVXPHDF/F8MPPCOFOVXPHDF.SQUARE.jpg http://cdn.instructables.com/F8M/PPCO/FOVXPHDF/F8MPPCOFOVXPHDF.SMALL.jpg FullyInvolvedScientist I made this lamp for my nephew this Christmas. I used 4 UV LEDs and a few straws to give the effect of 2 tiny black light tubes. I plastic welded the store bought UV Pin Art piece to a project box from the 'shack as the base. The wires run through the spacers and down into the base. There is an ...
By: FullyInvolvedScientist

Continue Reading »]]>
Sun, 28 Dec 2008 19:09:32 PST