Instructables: exploring - photos - robot http://www.instructables.com Thu, 28 Aug 2014 16:32:16 PDT BLOX v1.01 How I made a robot- D.S http://www.instructables.com/id/How-I-made-a-robot-DS/ http://cdn.instructables.com/FUC/D4I1/HUTNMPG7/FUCD4I1HUTNMPG7.SQUARE2.jpg http://cdn.instructables.com/FUC/D4I1/HUTNMPG7/FUCD4I1HUTNMPG7.SQUARE.jpg http://cdn.instructables.com/FUC/D4I1/HUTNMPG7/FUCD4I1HUTNMPG7.SMALL.jpg Dipanjan This is a tribute to my teacher- D.S Sir. Building a robot can be complex,and explaining each and every details is almost impossible. So I thought why don't I show you actually how I built the bot. At first lets take a look at some pictures and videos- When I was about to build the bot, ho...
By: Dipanjan

Continue Reading »]]>
Mon, 5 May 2014 11:13:12 PDT
Self Balancing Gyroscope V3 Using Arduino and Pot for Tilt Sensor http://www.instructables.com/id/Self-Balancing-Gyroscope-V3-Using-Arduino-and-Pot-/ http://cdn.instructables.com/FW9/DTRF/HUKRIDK4/FW9DTRFHUKRIDK4.SQUARE2.jpg http://cdn.instructables.com/FW9/DTRF/HUKRIDK4/FW9DTRFHUKRIDK4.SQUARE.jpg http://cdn.instructables.com/FW9/DTRF/HUKRIDK4/FW9DTRFHUKRIDK4.SMALL.jpg JimRD Here is the continuing saga of my gyroscope - in this version I use an Arduino Uno and a potentiometer to swing a counter weight to balance a precessing gyroscope so that it will balance indefinitely on two chopsticks. Now that it is balancing itself I guess I will add back the wheels and take it fo...
By: JimRD

Continue Reading »]]>
Tue, 29 Apr 2014 02:23:44 PDT
Gyroscopic Precession Robot (Version 2) http://www.instructables.com/id/Gyroscopic-Precession-Robot-Version-2/ http://cdn.instructables.com/FK1/H5BB/HUBWV4VI/FK1H5BBHUBWV4VI.SQUARE2.jpg http://cdn.instructables.com/FK1/H5BB/HUBWV4VI/FK1H5BBHUBWV4VI.SQUARE.jpg http://cdn.instructables.com/FK1/H5BB/HUBWV4VI/FK1H5BBHUBWV4VI.SMALL.jpg JimRD This is a little high stepping robot that moves forward based on the precession of a fast spinning gyroscope rotor. It is based on the work of John Jameson's Gyro Walker. Photo 1: picture of my working robot. It is radio controlled with an ESC to control motor speed, a servo to move the legs. The r...
By: JimRD

Continue Reading »]]>
Wed, 23 Apr 2014 17:47:31 PDT
Robot Toy http://www.instructables.com/id/Robot-Toy/ http://cdn.instructables.com/FZ6/KR18/HUBAQS36/FZ6KR18HUBAQS36.SQUARE2.jpg http://cdn.instructables.com/FZ6/KR18/HUBAQS36/FZ6KR18HUBAQS36.SQUARE.jpg http://cdn.instructables.com/FZ6/KR18/HUBAQS36/FZ6KR18HUBAQS36.SMALL.jpg Scamerman Run This is Robot Toy maked from seretide diskus. I made this robot with parts inside Seretide and also only tool I used for it is hot glue gun. It is fun and easy instructable. Hope you like it. Materials: 1. 4xSeretide Diskus Tools: 1.Hot Glue Gun
By: Scamerman Run

Continue Reading »]]>
Tue, 22 Apr 2014 08:53:33 PDT
Paper Robot Leads Pride Parade http://www.instructables.com/id/Paper-Robot-Leads-Pride-Parade/ http://cdn.instructables.com/FKQ/RY0U/HTX5JZD1/FKQRY0UHTX5JZD1.SQUARE2.jpg http://cdn.instructables.com/FKQ/RY0U/HTX5JZD1/FKQRY0UHTX5JZD1.SQUARE.jpg http://cdn.instructables.com/FKQ/RY0U/HTX5JZD1/FKQRY0UHTX5JZD1.SMALL.jpg Catalin Corrigan Over the last year I've handcrafted a Paper Robot hero in Bozeman, MT. I've used the comic and costume to promote good deeds and humanitarian causes in the community. The basis for the project was to show just how much you can do with art. I was able to do quite a lot and am grateful to all the peop...
By: Catalin Corrigan

Continue Reading »]]>
Sat, 12 Apr 2014 14:03:49 PDT
Yellow instructables ROBOT http://www.instructables.com/id/Yellow-instructables-ROBOT/ http://cdn.instructables.com/FOU/TSG9/HT558ZL4/FOUTSG9HT558ZL4.SQUARE2.jpg http://cdn.instructables.com/FOU/TSG9/HT558ZL4/FOUTSG9HT558ZL4.SQUARE.jpg http://cdn.instructables.com/FOU/TSG9/HT558ZL4/FOUTSG9HT558ZL4.SMALL.jpg nollie551 This is my version of the Yellow ROBOT  MATERIALS : 1. 1/16" plywood 2. 1/4" square dowels 3. box cutter 4. cheap acrylic paint 5. remote control car, spider , truck ect. you must gut 6. hot glue gun 7. foam sheets 8. black marker 9. look at  the pictures for anything that i forgot to list.
By: nollie551

Continue Reading »]]>
Mon, 24 Mar 2014 18:02:21 PDT
Arduino robot arm http://www.instructables.com/id/Arduino-robot-arm-1/ http://cdn.instructables.com/FRQ/JLXI/HT2TXMCI/FRQJLXIHT2TXMCI.SQUARE2.jpg http://cdn.instructables.com/FRQ/JLXI/HT2TXMCI/FRQJLXIHT2TXMCI.SQUARE.jpg http://cdn.instructables.com/FRQ/JLXI/HT2TXMCI/FRQJLXIHT2TXMCI.SMALL.jpg marti558 This is my arduino robot arm. It is made out of aluminium plates. I used 5 servo motors.  The arm can lift around  50g.  Motors are powered with 5V  and each motor draw around 1A of current, but my power supply was 15V. So  I made simple circuit out of  five 7805 regulators. It isnt the best way to ...
By: marti558

Continue Reading »]]>
Sat, 22 Mar 2014 08:48:14 PDT
EZ Robot Controlled Lost in Space B9 Robot http://www.instructables.com/id/EZ-Robot-Controlled-Lost-in-Space-B9-Robot/ http://cdn.instructables.com/F02/U2GH/HT2TXL0B/F02U2GHHT2TXL0B.SQUARE2.jpg http://cdn.instructables.com/F02/U2GH/HT2TXL0B/F02U2GHHT2TXL0B.SQUARE.jpg http://cdn.instructables.com/F02/U2GH/HT2TXL0B/F02U2GHHT2TXL0B.SMALL.jpg dschulpius This is my full sized exact replica of the 1960's TV show's Lost in Space B9 Robot. I've been building it for about 2 years now. It's animation is controlled by 3 EZ Robot control boards (EZB) and his voice files were made by the origi...
By: dschulpius

Continue Reading »]]>
Sat, 22 Mar 2014 08:10:13 PDT
Arduino Robot with coil gun / gauss gun drone http://www.instructables.com/id/Arduino-Robot-with-coil-gun-gauss-gun-drone/ http://cdn.instructables.com/FQG/A01T/HRCJZYOY/FQGA01THRCJZYOY.SQUARE2.jpg http://cdn.instructables.com/FQG/A01T/HRCJZYOY/FQGA01THRCJZYOY.SQUARE.jpg http://cdn.instructables.com/FQG/A01T/HRCJZYOY/FQGA01THRCJZYOY.SMALL.jpg Eagle199393   12V-220V inverter, 2*680uF capacitors, coil, laser sight, 2servo, 4mm projectile If YOU want more info please write in comments.
By: Eagle199393

Continue Reading »]]>
Fri, 7 Feb 2014 05:52:42 PST
Autonomous Arduino Rover 5 http://www.instructables.com/id/Autonomous-Arduino-Rover-5/ http://cdn.instructables.com/FAE/I0LY/HR0AR4F2/FAEI0LYHR0AR4F2.SQUARE2.jpg http://cdn.instructables.com/FAE/I0LY/HR0AR4F2/FAEI0LYHR0AR4F2.SQUARE.jpg http://cdn.instructables.com/FAE/I0LY/HR0AR4F2/FAEI0LYHR0AR4F2.SMALL.jpg pjdtechy This is my very first Arduino http://youtu.be/4KKbA1m54Y4project, I wanted to learn C and C++ programming while having fun. So I decided to put together an autonomous toy capable of driving itself around and avoid obstacles. Again I am in the process of learning still a rookie, my codes work for now...
By: pjdtechy

Continue Reading »]]>
Thu, 30 Jan 2014 16:17:52 PST
OK Robot http://www.instructables.com/id/OK-Robot/ http://cdn.instructables.com/F6H/8XXN/HQV6H8UW/F6H8XXNHQV6H8UW.SQUARE2.jpg http://cdn.instructables.com/F6H/8XXN/HQV6H8UW/F6H8XXNHQV6H8UW.SQUARE.jpg http://cdn.instructables.com/F6H/8XXN/HQV6H8UW/F6H8XXNHQV6H8UW.SMALL.jpg Rifle Creek This is a refined bad robot more in line with the initial Sci Fi punchlines
By: Rifle Creek

Continue Reading »]]>
Sat, 25 Jan 2014 19:00:59 PST
Chainsaw, a Wire Transformer http://www.instructables.com/id/Chainsaw-a-Wire-Transformer/ http://cdn.instructables.com/FUE/742I/HQQLNMKY/FUE742IHQQLNMKY.SQUARE2.jpg http://cdn.instructables.com/FUE/742I/HQQLNMKY/FUE742IHQQLNMKY.SQUARE.jpg http://cdn.instructables.com/FUE/742I/HQQLNMKY/FUE742IHQQLNMKY.SMALL.jpg Craft maker infinity First, I want to give you an update. I am having technical problems, so if you post comments under my instructables, I will not be able to respond to them. But comments are welcome because I love reading them. But if you have a question, or want me to respond to you comment, post it on my orangeboar...
By: Craft maker infinity

Continue Reading »]]>
Fri, 24 Jan 2014 14:55:46 PST
Robotic Arm (Wichita State Robotics) http://www.instructables.com/id/Robotic-Arm-Wichita-State-Robotics/ http://cdn.instructables.com/FRU/Q6JP/HQEA3IVS/FRUQ6JPHQEA3IVS.SQUARE2.jpg http://cdn.instructables.com/FRU/Q6JP/HQEA3IVS/FRUQ6JPHQEA3IVS.SQUARE.jpg http://cdn.instructables.com/FRU/Q6JP/HQEA3IVS/FRUQ6JPHQEA3IVS.SMALL.jpg AustinCrane Hello, I am Austin Crane and i am the president of a Robotics Team at Wichita State University. This semester was the first official semester that RIG ( Robotic Implementations Group) was a registered student organization. Because we were so new to the Student Government and the politics of Student ...
By: AustinCrane

Continue Reading »]]>
Mon, 13 Jan 2014 20:39:51 PST
How to make desktop vacuum cleaner robot http://www.instructables.com/id/Self-made-desktop-vacuum-cleaner-from-Taiwan/ http://cdn.instructables.com/F7M/Y9M7/HQDLWOZC/F7MY9M7HQDLWOZC.SQUARE2.jpg http://cdn.instructables.com/F7M/Y9M7/HQDLWOZC/F7MY9M7HQDLWOZC.SQUARE.jpg http://cdn.instructables.com/F7M/Y9M7/HQDLWOZC/F7MY9M7HQDLWOZC.SMALL.jpg jake_lee Not long a ago, I started to search Instructables to find how to build a obstacle avoiding robot, then I had this idea to build a mini version Irobot vacuum cleaner. The development process takes about 3-4 months since i had to figure out how hardware/software and mechanical works, I build the model...
By: jake_lee

Continue Reading »]]>
Mon, 13 Jan 2014 06:01:07 PST
Cardboard Robot for little kids http://www.instructables.com/id/Cardboard-Robot-for-little-kids/ http://cdn.instructables.com/FXG/M7A1/HQBR69N6/FXGM7A1HQBR69N6.SQUARE2.jpg http://cdn.instructables.com/FXG/M7A1/HQBR69N6/FXGM7A1HQBR69N6.SQUARE.jpg http://cdn.instructables.com/FXG/M7A1/HQBR69N6/FXGM7A1HQBR69N6.SMALL.jpg sophiecarlisle I made 12 robot "kits" for my daughters bday party.   To make one, you will need: 2 boxes (one smaller than the other), tinfoil sheets, spray adhesive, xacto knife, duct tape (silver and red), laundry ducting, chip clip, whisk, round piece of cardboard (or plastic lid), rubberbands, 1 tupperware bo...
By: sophiecarlisle

Continue Reading »]]>
Sat, 11 Jan 2014 22:06:35 PST
ROBOT CLOCK - FIRST ATTEMPT http://www.instructables.com/id/ROBOT-CLOCK-FIRST-ATTEMPT/ http://cdn.instructables.com/FFC/TGNS/HQ54NL5Q/FFCTGNSHQ54NL5Q.SQUARE2.jpg http://cdn.instructables.com/FFC/TGNS/HQ54NL5Q/FFCTGNSHQ54NL5Q.SQUARE.jpg http://cdn.instructables.com/FFC/TGNS/HQ54NL5Q/FFCTGNSHQ54NL5Q.SMALL.jpg wkiekens Hello all and welcome to a page which has yet to flourish. Our very first attempt at finding where open design fits in my life left me with my very first attempt at an object. A clock. (I know, cliché but we all have to start somewhere) The instructions and assembly are pretty much straight forwar...
By: wkiekens

Continue Reading »]]>
Tue, 7 Jan 2014 06:53:12 PST
BoB the Pi-Ped http://www.instructables.com/id/BoB-the-Pi-Ped/ http://cdn.instructables.com/F37/TTE8/HPJBITVM/F37TTE8HPJBITVM.SQUARE2.jpg http://cdn.instructables.com/F37/TTE8/HPJBITVM/F37TTE8HPJBITVM.SQUARE.jpg http://cdn.instructables.com/F37/TTE8/HPJBITVM/F37TTE8HPJBITVM.SMALL.jpg k.biagini shortly after buying my r-pi at makerfaire i decided to upgrade my BoB design. things got out of hand and BoB the Pi-Ped was born. He went from a 3d printed 4 servo waddling robot to a 3d printed 13 servo humanoid robot with an on-board pi and arduino for brains and servo control. Here is the sad pa...
By: k.biagini

Continue Reading »]]>
Mon, 23 Dec 2013 09:30:49 PST
Line following robot with PID algorithm http://www.instructables.com/id/Line-following-robot-with-PID-algorithm/ http://cdn.instructables.com/FK1/3G69/HOUFZPAB/FK13G69HOUFZPAB.SQUARE2.jpg http://cdn.instructables.com/FK1/3G69/HOUFZPAB/FK13G69HOUFZPAB.SQUARE.jpg http://cdn.instructables.com/FK1/3G69/HOUFZPAB/FK13G69HOUFZPAB.SMALL.jpg mihaipop11 Line following robot designed with Solidworks and implemented with arduino, ardumoto for control of the wheels, and a sensor bar with 8 infrared sensors. For any questions regarding this line following please leave a comment or message me.
By: mihaipop11

Continue Reading »]]>
Thu, 5 Dec 2013 14:45:50 PST
lego mindstorm NXT Snow college challenge http://www.instructables.com/id/lego-mindstorm-NXT-Snow-college-challenge/ http://cdn.instructables.com/FNM/N4YV/HOSLKR8R/FNMN4YVHOSLKR8R.SQUARE2.jpg http://cdn.instructables.com/FNM/N4YV/HOSLKR8R/FNMN4YVHOSLKR8R.SQUARE.jpg http://cdn.instructables.com/FNM/N4YV/HOSLKR8R/FNMN4YVHOSLKR8R.SMALL.jpg itsmylife10173 This robot was for my eng 1000 class at snow college the object of the chanenge was to drive up the stairs into a square push the orange cans (hunters) out of the square pick up the white can (rabbit) and bring it back over the stairs. robot made and programmed by Zach Harris and M...
By: itsmylife10173

Continue Reading »]]>
Thu, 5 Dec 2013 10:56:54 PST
Steampunk Droid http://www.instructables.com/id/Steampunk-Droid/ http://cdn.instructables.com/F3L/FLWN/HO7XQDMD/F3LFLWNHO7XQDMD.SQUARE2.jpg http://cdn.instructables.com/F3L/FLWN/HO7XQDMD/F3LFLWNHO7XQDMD.SQUARE.jpg http://cdn.instructables.com/F3L/FLWN/HO7XQDMD/F3LFLWNHO7XQDMD.SMALL.jpg podpadstudios Ok here we go, my latest Droid. I absolutely love the Steampunk style so making a Steampunk Droid was bound to happen eventually. This is certainly the most fun Droid I have ever created. 90 % of the parts are taken from other things which is the essence of Steampunk. The Droid is full size, radio c...
By: podpadstudios

Continue Reading »]]>
Sat, 23 Nov 2013 13:58:10 PST
Jeff-A cheap and simple Ic robot http://www.instructables.com/id/Jeff-A-cheap-and-simple-Ic-robot/ http://cdn.instructables.com/FDN/G5SZ/HNM4BYEW/FDNG5SZHNM4BYEW.SQUARE2.jpg http://cdn.instructables.com/FDN/G5SZ/HNM4BYEW/FDNG5SZHNM4BYEW.SQUARE.jpg http://cdn.instructables.com/FDN/G5SZ/HNM4BYEW/FDNG5SZHNM4BYEW.SMALL.jpg British Badger Jeff took 5 weeks to compete and is a simple IC robot. Jeff's main thing is the led headlights witch come on automatically when it is dark. It works by having what is called a current see sore witch when the current is higher on the Ldrs side compare to the Variable resistors side it puts power to c...
By: British Badger

Continue Reading »]]>
Sun, 17 Nov 2013 08:50:35 PST
RC Robot tractor http://www.instructables.com/id/RC-Robot-tractor/ http://cdn.instructables.com/FKF/MZIL/HNM4CG9Y/FKFMZILHNM4CG9Y.SQUARE2.jpg http://cdn.instructables.com/FKF/MZIL/HNM4CG9Y/FKFMZILHNM4CG9Y.SQUARE.jpg http://cdn.instructables.com/FKF/MZIL/HNM4CG9Y/FKFMZILHNM4CG9Y.SMALL.jpg isodesign Hello, Sorry for my bad English (thank you google traduction). It is a motorized unit, electrical and radio controlled! This module is equipped with two 350w 24V motors supplied with two 12V batteries. It may have various applications, such as a small tow trailer for moving a heavy element from one...
By: isodesign

Continue Reading »]]>
Wed, 6 Nov 2013 02:12:46 PST
Quadruped robot using 2 servos with home made arduino http://www.instructables.com/id/Quadruped-robot-using-2-servos-with-home-made-ardu/ http://cdn.instructables.com/FIY/KOVS/HNL5W5FX/FIYKOVSHNL5W5FX.SQUARE2.jpg http://cdn.instructables.com/FIY/KOVS/HNL5W5FX/FIYKOVSHNL5W5FX.SQUARE.jpg http://cdn.instructables.com/FIY/KOVS/HNL5W5FX/FIYKOVSHNL5W5FX.SMALL.jpg vamsi danda hey every one if you got an arduino mini and  two standard servos you can make a little robo pet that walk on two 4 legs. but in the project i didn't used a original  arduino. i used an ATmega8 microcontroller with arduino boot-loader. if you are a little familiar with AVR micocontrollers and is...
By: vamsi danda

Continue Reading »]]>
Mon, 4 Nov 2013 05:16:30 PST
Space Robot Costume http://www.instructables.com/id/Space-Robot-Costume/ http://cdn.instructables.com/FCK/O2QV/HNE3YBOS/FCKO2QVHNE3YBOS.SQUARE2.jpg http://cdn.instructables.com/FCK/O2QV/HNE3YBOS/FCKO2QVHNE3YBOS.SQUARE.jpg http://cdn.instructables.com/FCK/O2QV/HNE3YBOS/FCKO2QVHNE3YBOS.SMALL.jpg zoomster All done before Halloween , well sorta. I had worked on a backpack to go along with the costume but didnt like the feel of it in the end so i left it out but im still showing some pictures of it.  The costume is sound activated so it lights up every time i fire the weapon since its hooked up to some...
By: zoomster

Continue Reading »]]>
Thu, 31 Oct 2013 22:54:14 PDT
Knee Pads for Robot Space costume http://www.instructables.com/id/Knee-Pads-for-Robot-Space-costume/ http://cdn.instructables.com/FS0/7MWR/HNGEIKD0/FS07MWRHNGEIKD0.SQUARE2.jpg http://cdn.instructables.com/FS0/7MWR/HNGEIKD0/FS07MWRHNGEIKD0.SQUARE.jpg http://cdn.instructables.com/FS0/7MWR/HNGEIKD0/FS07MWRHNGEIKD0.SMALL.jpg zoomster Bought some cool looking used knee pads on Ebay. Took them apart and painted them white, with plastic spray paint. Hot glued some EL wire through out the pads. Drilled some holes on the sides to attach some velcro straps.   Thanks for watching!!! :D
By: zoomster

Continue Reading »]]>
Thu, 31 Oct 2013 22:38:12 PDT
C3PO From Star Wars http://www.instructables.com/id/C3PO-From-Star-Wars/ http://cdn.instructables.com/FSS/YV8Q/HMMF0PLJ/FSSYV8QHMMF0PLJ.SQUARE2.jpg http://cdn.instructables.com/FSS/YV8Q/HMMF0PLJ/FSSYV8QHMMF0PLJ.SQUARE.jpg http://cdn.instructables.com/FSS/YV8Q/HMMF0PLJ/FSSYV8QHMMF0PLJ.SMALL.jpg 75vetteman  Everybody loves the movie Star Wars and remembers all the main characters from the movie. One of my favorite characters in the movie was C3PO. The intelligent robot made by Anakin Skywalker. I redesigned him in 123 Design and tried to replicate him. There are pictures above. I hope you like how I d...
By: 75vetteman

Continue Reading »]]>
Fri, 11 Oct 2013 09:56:03 PDT
cheap DIY robot hand shadow kit - robot that shadows the movement of your hand http://www.instructables.com/id/cheap-DIY-robot-hand-shadow-kit-robot-that-shadows/ http://cdn.instructables.com/FIY/KKAH/HM8D0SID/FIYKKAHHM8D0SID.SQUARE2.jpg http://cdn.instructables.com/FIY/KKAH/HM8D0SID/FIYKKAHHM8D0SID.SQUARE.jpg http://cdn.instructables.com/FIY/KKAH/HM8D0SID/FIYKKAHHM8D0SID.SMALL.jpg something1 If you guys want to see more kits from me please support me here  http://www.indiegogo.com/projects/help-me-build-a-electronics-lab/piad http://www.clubjameco.com/index.php/projects/project_details/24/21110 buy it here http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1...
By: something1

Continue Reading »]]>
Tue, 8 Oct 2013 15:33:51 PDT
Toothbrush Motor-bot http://www.instructables.com/id/Toothbrush-Motor-bot/ http://cdn.instructables.com/FVE/6BT8/HLZRH715/FVE6BT8HLZRH715.SQUARE2.jpg http://cdn.instructables.com/FVE/6BT8/HLZRH715/FVE6BT8HLZRH715.SQUARE.jpg http://cdn.instructables.com/FVE/6BT8/HLZRH715/FVE6BT8HLZRH715.SMALL.jpg robot28 I used a cardboard base then added toothbrushes to the bottom. I then added a vibration motor, the switch and battery pack.
By: robot28

Continue Reading »]]>
Sat, 28 Sep 2013 03:06:41 PDT
Giant Robot http://www.instructables.com/id/Giant-Robot/ http://cdn.instructables.com/FG7/D5J0/HLZRQI7M/FG7D5J0HLZRQI7M.SQUARE2.jpg http://cdn.instructables.com/FG7/D5J0/HLZRQI7M/FG7D5J0HLZRQI7M.SQUARE.jpg http://cdn.instructables.com/FG7/D5J0/HLZRQI7M/FG7D5J0HLZRQI7M.SMALL.jpg yihungkuo Standing 3.5m tall, he could sit and read a book as well!  made with only makedo and cardboard (and some wires and light bulb).  This was created to be place in shows and kids play area.
By: yihungkuo

Continue Reading »]]>
Wed, 25 Sep 2013 05:03:24 PDT
Video Prop. Small Robot "P.E.R.I" http://www.instructables.com/id/Video-Prop-Small-Robot-PERI/ http://cdn.instructables.com/FN8/HTOX/HKZAW6ER/FN8HTOXHKZAW6ER.SQUARE2.jpg http://cdn.instructables.com/FN8/HTOX/HKZAW6ER/FN8HTOXHKZAW6ER.SQUARE.jpg http://cdn.instructables.com/FN8/HTOX/HKZAW6ER/FN8HTOXHKZAW6ER.SMALL.jpg arthurdent During the late 80s there was a TV show called "Jason Of Star Command" and he had a little robot that helped him out of trouble. This is an altered copy I made of it: Its' for use in a video I am working on. I changed the color from washed-out blue to red and changed the name from W.1.K.1. to P.E.R....
By: arthurdent

Continue Reading »]]>
Sun, 1 Sep 2013 20:19:10 PDT
ROBOT-17-e-31 http://www.instructables.com/id/ROBOT-17-e-31/ http://cdn.instructables.com/FXS/9TOD/HKVKM7U0/FXS9TODHKVKM7U0.SQUARE2.jpg http://cdn.instructables.com/FXS/9TOD/HKVKM7U0/FXS9TODHKVKM7U0.SQUARE.jpg http://cdn.instructables.com/FXS/9TOD/HKVKM7U0/FXS9TODHKVKM7U0.SMALL.jpg AMMONITEa how to build a toy ROBOT for 3d printing in 123D Design
By: AMMONITEa

Continue Reading »]]>
Sun, 1 Sep 2013 14:26:12 PDT
3D Printable Robot Money Clip with Grip http://www.instructables.com/id/3D-Printable-Robot-Money-Clip-w-Grip/ http://cdn.instructables.com/FTG/S6GL/HKVL9UYM/FTGS6GLHKVL9UYM.SQUARE2.jpg http://cdn.instructables.com/FTG/S6GL/HKVL9UYM/FTGS6GLHKVL9UYM.SQUARE.jpg http://cdn.instructables.com/FTG/S6GL/HKVL9UYM/FTGS6GLHKVL9UYM.SMALL.jpg mazzmn   Instructables has eaten into my evening once again!!  They put out this 3D Project Challenge in combination with 3dcreationsystems.com. So simple, all I have to do is design or modify a money clip in a 3D design tool!?! So here I am later the same night and I thought I would share the results: ...
By: mazzmn

Continue Reading »]]>
Tue, 27 Aug 2013 22:26:47 PDT
Arduino Animatronic Hand Mark 1 http://www.instructables.com/id/Arduino-Animatronic-Hand-Mark-1/ http://cdn.instructables.com/FC0/0RW2/HJKBK054/FC00RW2HJKBK054.SQUARE2.jpg http://cdn.instructables.com/FC0/0RW2/HJKBK054/FC00RW2HJKBK054.SQUARE.jpg http://cdn.instructables.com/FC0/0RW2/HJKBK054/FC00RW2HJKBK054.SMALL.jpg TheSteamer71 This is an animatronic hand I built. The fingers, the palm and the forearm are entirely made of wood (poplar to be exact). The fingers are articulated by tendons (fishing line) pulled by motors. Right now, the 5 servo motors are controlled with an Arduino UNO. This protoype can perform a good amount...
By: TheSteamer71

Continue Reading »]]>
Thu, 8 Aug 2013 18:35:17 PDT
Nothing http://www.instructables.com/id/Robug-Adventure/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif ---------------------    
By: ---------------------

Continue Reading »]]>
Fri, 2 Aug 2013 05:20:05 PDT
TELEPRESENCE ROBOT (DIY AVATAR) http://www.instructables.com/id/TELEPRESENCE-ROBOT-DIY-AVATAR/ http://cdn.instructables.com/F2T/ZL5B/HJAI6C6G/F2TZL5BHJAI6C6G.SQUARE2.jpg http://cdn.instructables.com/F2T/ZL5B/HJAI6C6G/F2TZL5BHJAI6C6G.SQUARE.jpg http://cdn.instructables.com/F2T/ZL5B/HJAI6C6G/F2TZL5BHJAI6C6G.SMALL.jpg FDW34 I present REGO, the objective of using bricks existing technologies and combine them to create a avatar robot. This robot will allow us to see, hear, move around and chat with people around the robot from a simple Web browser, so from anywhere in the world. [Je vous présente REGO, le but est d'uti...
By: FDW34

Continue Reading »]]>
Sat, 20 Jul 2013 15:44:13 PDT
EZ-Robot Wall.E http://www.instructables.com/id/EZ-Robot-WallE/ http://cdn.instructables.com/FNW/KPU0/HJ60589X/FNWKPU0HJ60589X.SQUARE2.jpg http://cdn.instructables.com/FNW/KPU0/HJ60589X/FNWKPU0HJ60589X.SQUARE.jpg http://cdn.instructables.com/FNW/KPU0/HJ60589X/FNWKPU0HJ60589X.SMALL.jpg Djandco I bought an EZ-Robot kit after seeing Djsures on instructables a while back, its pointless doing a step by step instructable because you can't top the guy who thought of it in the first place :-) If I was wearing a hat at the moment I would take it off to him, one of the most versatile and easy to u...
By: Djandco

Continue Reading »]]>
Tue, 16 Jul 2013 15:10:20 PDT
GPS Guided Autonomous Rover http://www.instructables.com/id/GPS-Guided-Autonomous-Rover/ http://cdn.instructables.com/FP3/CHH6/HJ5ZQRNM/FP3CHH6HJ5ZQRNM.SQUARE2.jpg http://cdn.instructables.com/FP3/CHH6/HJ5ZQRNM/FP3CHH6HJ5ZQRNM.SQUARE.jpg http://cdn.instructables.com/FP3/CHH6/HJ5ZQRNM/FP3CHH6HJ5ZQRNM.SMALL.jpg bluebean For a group Project we were required to build a Rover that would follow a predetermined track using GPS coordinates. Extensive details are listed in the report attached at the bottom of the page. by Josh Berman, Terry Bugai, Kent Salmon and Mayur Chiba exerpt from the technical report attached: ...
By: bluebean

Continue Reading »]]>
Tue, 16 Jul 2013 13:35:56 PDT
Arduino controlled Marble Maze http://www.instructables.com/id/Arduino-controlled-Marble-Maze/ http://cdn.instructables.com/FUE/XFKP/HIPISKHK/FUEXFKPHIPISKHK.SQUARE2.jpg http://cdn.instructables.com/FUE/XFKP/HIPISKHK/FUEXFKPHIPISKHK.SQUARE.jpg http://cdn.instructables.com/FUE/XFKP/HIPISKHK/FUEXFKPHIPISKHK.SMALL.jpg CarlS This is a simple Arduino project to control a marble maze.  The Marble Maze (you can control it online) comes from a project at TeleToyland, and the build instructions are at the this Instructable.  For a recent show, I needed to allow kids to play with the maze under local control.  Since the maze ...
By: CarlS

Continue Reading »]]>
Tue, 9 Jul 2013 21:14:21 PDT
Table Sized Arduino Joystick Controlled T-Slot XY Table http://www.instructables.com/id/Table-Sized-Arduino-Joystick-Controlled-T-Slot-XY-/ http://cdn.instructables.com/FPN/FZE1/HIPISKIB/FPNFZE1HIPISKIB.SQUARE2.jpg http://cdn.instructables.com/FPN/FZE1/HIPISKIB/FPNFZE1HIPISKIB.SQUARE.jpg http://cdn.instructables.com/FPN/FZE1/HIPISKIB/FPNFZE1HIPISKIB.SMALL.jpg CarlS I needed to make a smaller version of the TeleToyland Sandbox 2 to take to Maker Faires and other shows, so I reduced the size of the previous one to fit on a plastic folding table.  The outside dimensions are about 30"x32", and the work area is about 16" square.  The T-Slot approach for this low pr...
By: CarlS

Continue Reading »]]>
Tue, 9 Jul 2013 21:09:42 PDT
Crawlerbot 2000 http://www.instructables.com/id/Crawlerbot-2000-2001/ http://cdn.instructables.com/FYN/1S0Z/HIW2RK9T/FYN1S0ZHIW2RK9T.SQUARE2.jpg http://cdn.instructables.com/FYN/1S0Z/HIW2RK9T/FYN1S0ZHIW2RK9T.SQUARE.jpg http://cdn.instructables.com/FYN/1S0Z/HIW2RK9T/FYN1S0ZHIW2RK9T.SMALL.jpg rptech Check out my cool new toy guys, I (a high school student) created this magnificent monster from scratch; all parts were designed and created specifically for this project At first I designed 3d models and created blueprints of the chassis and the track system. Soon I created a die for the gears...
By: rptech

Continue Reading »]]>
Mon, 8 Jul 2013 14:25:02 PDT
Dinobot- Heavy metal robot for 3D print http://www.instructables.com/id/Dinobot-Heavy-metal-robot-for-3D-print/ http://cdn.instructables.com/FZ4/TC0Q/HIAQ88SS/FZ4TC0QHIAQ88SS.SQUARE2.jpg http://cdn.instructables.com/FZ4/TC0Q/HIAQ88SS/FZ4TC0QHIAQ88SS.SQUARE.jpg http://cdn.instructables.com/FZ4/TC0Q/HIAQ88SS/FZ4TC0QHIAQ88SS.SMALL.jpg polkijain Dinobot- Heavy metal robot for 3D print MADE IN AUTODESK 3DS MAX SUPER AWESOME ROBOT CAN DO MUCH AND MORE THAN JUST MUCH WITH IT DELICATELY DESIGNED BEAST # Find A .RAR file(compressed) containing .obj file # # DON'T FORGET TO COMMENT AFTER PRINTING IT, ALSO PLEASE UPLOAD A PIC OF THE SAME
By: polkijain

Continue Reading »]]>
Sat, 6 Jul 2013 18:17:49 PDT
My Robot Tank http://www.instructables.com/id/My-Robot-Tank/ http://cdn.instructables.com/FG0/IZLE/HIGF12O7/FG0IZLEHIGF12O7.SQUARE2.jpg http://cdn.instructables.com/FG0/IZLE/HIGF12O7/FG0IZLEHIGF12O7.SQUARE.jpg http://cdn.instructables.com/FG0/IZLE/HIGF12O7/FG0IZLEHIGF12O7.SMALL.jpg rptech Check out my cool new toy guys, I (a high school student) created this magnificent monster from scratch, that's right from scratch (all parts were designed and created specifically for this project -- and the instructables contest). At first I designed 3d models and created blueprints of the chassi...
By: rptech

Continue Reading »]]>
Thu, 27 Jun 2013 16:53:05 PDT
Gyrobot for 3D Print http://www.instructables.com/id/Gyrobot-for-3D-Print/ http://cdn.instructables.com/FAK/RTXT/HI3TYUR7/FAKRTXTHI3TYUR7.SQUARE2.jpg http://cdn.instructables.com/FAK/RTXT/HI3TYUR7/FAKRTXTHI3TYUR7.SQUARE.jpg http://cdn.instructables.com/FAK/RTXT/HI3TYUR7/FAKRTXTHI3TYUR7.SMALL.jpg polkijain PLEASE VOTE UP THERE ^ Made In Autodesk Maya A stunning robot with an attitude hair-look Wheels can be printed separately and pinned up for locomotion (if innovated, can be made alive using few electronic components) FIND ATTACHMENT BELOW CONTAINING .RAR FILE COMPRESSED(containing .obj file for dir...
By: polkijain

Continue Reading »]]>
Sun, 23 Jun 2013 06:55:19 PDT
Easy hydraulic Robotics! http://www.instructables.com/id/Easy-hydraulic-Robotics/ http://cdn.instructables.com/F47/S9FP/HI3TYTTV/F47S9FPHI3TYTTV.SQUARE2.jpg http://cdn.instructables.com/F47/S9FP/HI3TYTTV/F47S9FPHI3TYTTV.SQUARE.jpg http://cdn.instructables.com/F47/S9FP/HI3TYTTV/F47S9FPHI3TYTTV.SMALL.jpg benmurton There is a lot of small electronic robotics that use servos and stepper motors, but there are very little good, small hydraulic robotics happening. This arm using simple syringes in an effective way that is capable of lifting a fair amount of weight for its size. The materials required are: sy...
By: benmurton

Continue Reading »]]>
Sat, 22 Jun 2013 21:38:12 PDT
Simple Robot Gripper http://www.instructables.com/id/Simple-Robot-Gripper/ http://cdn.instructables.com/FTF/AF8W/HHS9ITQD/FTFAF8WHHS9ITQD.SQUARE2.jpg http://cdn.instructables.com/FTF/AF8W/HHS9ITQD/FTFAF8WHHS9ITQD.SQUARE.jpg http://cdn.instructables.com/FTF/AF8W/HHS9ITQD/FTFAF8WHHS9ITQD.SMALL.jpg Cworkshop Here is my robot gripper that i am working on it is simple idea on the real working one but it is not ready yet to be printed 3D as soon i can i will upload one that you can probable  print it here is some photos that show u how it work and i am working on 3 fingers robot that save 98% from it's rea...
By: Cworkshop

Continue Reading »]]>
Tue, 18 Jun 2013 11:42:00 PDT
LIGHT FOLLOWING SIMPLE SPURT ROBOT http://www.instructables.com/id/LIGHT-FOLLOWING-SIMPLE-SPURT-ROBOT/ http://cdn.instructables.com/FE0/6D8J/HHS9KTJC/FE06D8JHHS9KTJC.SQUARE2.jpg http://cdn.instructables.com/FE0/6D8J/HHS9KTJC/FE06D8JHHS9KTJC.SQUARE.jpg http://cdn.instructables.com/FE0/6D8J/HHS9KTJC/FE06D8JHHS9KTJC.SMALL.jpg makesomeso hai guys this is my simple light following spurt robot.The things you needed to build this robot are: 1) two BC337 NPN transistors 2) two LDR's 3)two 100 RPM DC motors 4) one 9v battery holder 5) one breadboard 6) some wires OPTIONAL 1) wheels 2) some pins ( for connecting wires in breadboard ) ...
By: makesomeso

Continue Reading »]]>
Thu, 13 Jun 2013 05:32:14 PDT
Arduino Rover 2.0 http://www.instructables.com/id/Arduino-object-avoiding-rover-1/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Crazyffrey
By: Crazyffrey

Continue Reading »]]>
Tue, 11 Jun 2013 11:30:47 PDT
Arduino-based Robotic Manipulator http://www.instructables.com/id/Arduino-based-Robotic-Manipulator/ http://cdn.instructables.com/FZC/468H/HHS9CY77/FZC468HHHS9CY77.SQUARE2.jpg http://cdn.instructables.com/FZC/468H/HHS9CY77/FZC468HHHS9CY77.SQUARE.jpg http://cdn.instructables.com/FZC/468H/HHS9CY77/FZC468HHHS9CY77.SMALL.jpg TheSteamer71 This is my first prototype of a robotic manipulator. Until now, I've really been focusing on the physic aspect of the arm so I haven't been working a lot on the program aspect. The current goal of this project is to create a solid platform to reproduce every-day actions and develop my programming ap...
By: TheSteamer71

Continue Reading »]]>
Wed, 29 May 2013 15:58:16 PDT
UnderSeawolf: ROV for Long Island Sound http://www.instructables.com/id/UnderSeawolf-ROV-Project-for-Long-Island-Sound-Fr/ http://cdn.instructables.com/FYZ/PHYU/HH2VY4PL/FYZPHYUHH2VY4PL.SQUARE2.jpg http://cdn.instructables.com/FYZ/PHYU/HH2VY4PL/FYZPHYUHH2VY4PL.SQUARE.jpg http://cdn.instructables.com/FYZ/PHYU/HH2VY4PL/FYZPHYUHH2VY4PL.SMALL.jpg Veteran_ComputerEngineer Hi there and thanks for stopping by,  Every now and then I get an idea for my ROV but I have been stuck for a while now as I am trying to figure out how to, compactly, rotate those thrusters you see in the image. I was thinking about designing a 2-Axis module to go in between the ROV and the Thrust...
By: Veteran_ComputerEngineer

Continue Reading »]]>
Mon, 27 May 2013 12:01:30 PDT
Carboard Mechanical Robot Hand http://www.instructables.com/id/Carboard-Mechanical-Robot-Hand/ http://cdn.instructables.com/FXD/0QZL/HH2VMVTH/FXD0QZLHH2VMVTH.SQUARE2.jpg http://cdn.instructables.com/FXD/0QZL/HH2VMVTH/FXD0QZLHH2VMVTH.SQUARE.jpg http://cdn.instructables.com/FXD/0QZL/HH2VMVTH/FXD0QZLHH2VMVTH.SMALL.jpg chaitanyak if you use corrugated plastic instead of the cardboard.. youve got a poop-scoop :D
By: chaitanyak

Continue Reading »]]>
Sat, 25 May 2013 02:40:24 PDT