Instructables: exploring - photos http://www.instructables.com Mon, 21 Apr 2014 07:40:07 PDT BLOX v1.01 Pointeur laser 500mW vert Visible http://www.instructables.com/id/Pointeur-laser-500mW-vert-Visible/ http://www.instructables.com/files/deriv/FDL/3N7S/HU8P1LVJ/FDL3N7SHU8P1LVJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FDL/3N7S/HU8P1LVJ/FDL3N7SHU8P1LVJ.SQUARE.jpg http://www.instructables.com/files/deriv/FDL/3N7S/HU8P1LVJ/FDL3N7SHU8P1LVJ.SMALL.jpg pointeurlasers Ce Pointeur laser vert 500mW (classe IV) est un laser idéal en usage astronomique pour pointer les ciels étoilés et des objets à très longue distance ou étonner vos amis. Son faisceau de 80 mW en fait un laser une assez grande puissance, plutôt adapté en extérieur, mais aussi en intérieur, en prenan...
By: pointeurlasers

Continue Reading »]]>
Mon, 21 Apr 2014 04:24:20 PDT
10 Inch Wood Letters Logo http://www.instructables.com/id/10-Inch-Wood-Letters-Logo/ http://cdn.instructables.com/F0K/U2EG/HU8449ZN/F0KU2EGHU8449ZN.SQUARE2.jpg http://cdn.instructables.com/F0K/U2EG/HU8449ZN/F0KU2EGHU8449ZN.SQUARE.jpg http://cdn.instructables.com/F0K/U2EG/HU8449ZN/F0KU2EGHU8449ZN.SMALL.jpg stevenarango Hello there My Fellow Instructables.. Here i have 10 Inch Wood Letters  " Logo" I used Pine Wood 3 Pcs  3 Feet Long By 2 Inches Wide 3/4 Inch Thick. Using The Table Saw i Cut Them Into 3 Pcs About 5 mm Thick.  Then Using A template. I Created 3 Letters. 10" Tall  9 " Wide  & 2 " Thick. The Body ...
By: stevenarango

Continue Reading »]]>
Mon, 21 Apr 2014 01:20:30 PDT
Portable Beer Mug with Integrated Bottle Opener http://www.instructables.com/id/Portable-Beer-Mug-with-Integrated-Bottle-Opener/ http://cdn.instructables.com/F0B/F6HT/HU843YST/F0BF6HTHU843YST.SQUARE2.jpg http://cdn.instructables.com/F0B/F6HT/HU843YST/F0BF6HTHU843YST.SQUARE.jpg http://cdn.instructables.com/F0B/F6HT/HU843YST/F0BF6HTHU843YST.SMALL.jpg ddisdier You like being outdoors with your friends enjoying the company of a good beer? Here's is how you can redefine the meaning of "comfortable". Sometimes you wish you had a big mug that can hold at least two standard drinks worth of beer with the luxury of never misplacing that bottle opener that all yo...
By: ddisdier

Continue Reading »]]>
Sun, 20 Apr 2014 22:03:40 PDT
The Making of A Picture Frame http://www.instructables.com/id/The-Making-of-A-Picture-Frame/ http://cdn.instructables.com/FVM/SVSL/HU8P0MBB/FVMSVSLHU8P0MBB.SQUARE2.jpg http://cdn.instructables.com/FVM/SVSL/HU8P0MBB/FVMSVSLHU8P0MBB.SQUARE.jpg http://cdn.instructables.com/FVM/SVSL/HU8P0MBB/FVMSVSLHU8P0MBB.SMALL.jpg ytareke1988 I thought I would share the process of making a picture frame for my bathroom wall. The most challenging part is cutting the pieces correctly, other than that it's a pretty simple process. Meet Emona Lisa.
By: ytareke1988

Continue Reading »]]>
Sun, 20 Apr 2014 18:42:22 PDT
onion skin dyed eggs my way http://www.instructables.com/id/onion-skin-dyed-eggs-my-way/ http://cdn.instructables.com/FQK/1G6Z/HU8O8WAP/FQK1G6ZHU8O8WAP.SQUARE2.jpg http://cdn.instructables.com/FQK/1G6Z/HU8O8WAP/FQK1G6ZHU8O8WAP.SQUARE.jpg http://cdn.instructables.com/FQK/1G6Z/HU8O8WAP/FQK1G6ZHU8O8WAP.SMALL.jpg mununa I've been dyeing eggs with onion skins for many, many years. This is a technique I love for two reasons: 1. the end result is a beautiful one; and 2. I can't fail - anytime I dye the eggs this way they turn out just great. Unfortunately I don't have a step by step instructable with pictures on this ...
By: mununa

Continue Reading »]]>
Sun, 20 Apr 2014 12:53:40 PDT
Paracord dog collar tutorial http://www.instructables.com/id/Paracord-dog-collar-tutorial/ http://cdn.instructables.com/FFE/J56T/HU841V17/FFEJ56THU841V17.SQUARE2.jpg http://cdn.instructables.com/FFE/J56T/HU841V17/FFEJ56THU841V17.SQUARE.jpg http://cdn.instructables.com/FFE/J56T/HU841V17/FFEJ56THU841V17.SMALL.jpg mark_well In this tutorial you will learn how to make a paracord dog collar. I will show you the most popular design used to make collars out of paracord, namely the double cobra knot collar. Originally I made this tutorial for my website, Paracord Guild, which you are welcome to visit for additional paracord...
By: mark_well

Continue Reading »]]>
Sun, 20 Apr 2014 03:41:05 PDT
Audio HUB with an old sound card http://www.instructables.com/id/Audio-HUB-with-an-old-sound-card/ http://cdn.instructables.com/FSN/481L/HU7BACSB/FSN481LHU7BACSB.SQUARE2.jpg http://cdn.instructables.com/FSN/481L/HU7BACSB/FSN481LHU7BACSB.SQUARE.jpg http://cdn.instructables.com/FSN/481L/HU7BACSB/FSN481LHU7BACSB.SMALL.jpg Darkangeel_hd an sudio HUB made with my old "combined card" y only use: -an old headphones (for the jack IN) -the card -some wires for bridging conectors for testing and mounting: -others headphones -an electronic multimeter You just need to bind each part of the jack conectors to the others ones. And then to...
By: Darkangeel_hd

Continue Reading »]]>
Sat, 19 Apr 2014 16:42:51 PDT
Mr. Grass http://www.instructables.com/id/Mr-Grass/ http://cdn.instructables.com/FTN/VVQE/HU8445B9/FTNVVQEHU8445B9.SQUARE2.jpg http://cdn.instructables.com/FTN/VVQE/HU8445B9/FTNVVQEHU8445B9.SQUARE.jpg http://cdn.instructables.com/FTN/VVQE/HU8445B9/FTNVVQEHU8445B9.SMALL.jpg Eldalote Hi!  Spring is coming and I have a pleasure to introduce Mr. Grass! And what you will need for making this little guy? old tights grass seeds sand earth buttons for decoration Steps: Cut the sock Fill it. Layers go (from bottom): sand, earth, seeds Tie it up G...
By: Eldalote

Continue Reading »]]>
Sat, 19 Apr 2014 09:51:30 PDT
iPhone Passive Speakers (powerless) http://www.instructables.com/id/iPhone-Passive-Speakers-powerless/ http://cdn.instructables.com/FL0/NJDH/HU6RYUQX/FL0NJDHHU6RYUQX.SQUARE2.jpg http://cdn.instructables.com/FL0/NJDH/HU6RYUQX/FL0NJDHHU6RYUQX.SQUARE.jpg http://cdn.instructables.com/FL0/NJDH/HU6RYUQX/FL0NJDHHU6RYUQX.SMALL.jpg rodski My 1st DIY project shared here using scrap materials & left over materials from past projects i made,(this my 12th project now ). I'ts my hobby & it's my  first time to share it here knowing that there are lots of project that exist like this here.. But this one were all  made of scraps & excess mat...
By: rodski

Continue Reading »]]>
Sat, 19 Apr 2014 05:44:42 PDT
Circuit Board Guitar Strum http://www.instructables.com/id/Circuit-Board-Guitar-Strum/ http://cdn.instructables.com/FOM/B7A1/HU6QAXGP/FOMB7A1HU6QAXGP.SQUARE2.jpg http://cdn.instructables.com/FOM/B7A1/HU6QAXGP/FOMB7A1HU6QAXGP.SQUARE.jpg http://cdn.instructables.com/FOM/B7A1/HU6QAXGP/FOMB7A1HU6QAXGP.SMALL.jpg punpunguy First, you remove all the components on the circuit board, then you cut out a guitar pick shape out  then you sand it till the green comes off and also sand the edges. Done!
By: punpunguy

Continue Reading »]]>
Sat, 19 Apr 2014 04:35:04 PDT
DIY Nail polish phone case http://www.instructables.com/id/DIY-Nail-polish-phone-case/ http://cdn.instructables.com/FI9/OJI6/HU6QAX4O/FI9OJI6HU6QAX4O.SQUARE2.jpg http://cdn.instructables.com/FI9/OJI6/HU6QAX4O/FI9OJI6HU6QAX4O.SQUARE.jpg http://cdn.instructables.com/FI9/OJI6/HU6QAX4O/FI9OJI6HU6QAX4O.SMALL.jpg Sara Elizabeth Shillingford Everyone, this is how my phone case looks like right now. Hope you like it. It's pretty easy to do so you can apply this on your phone case too. Use your fav colors to paint it... and please post some pics of yours if you do this!  Enjoy! :D
By: Sara Elizabeth Shillingford

Continue Reading »]]>
Sat, 19 Apr 2014 03:19:38 PDT
Crusty Peach Cobbler http://www.instructables.com/id/Crusty-Peach-Cobbler/ http://cdn.instructables.com/FJI/NRSI/HU5TGVCN/FJINRSIHU5TGVCN.SQUARE2.jpg http://cdn.instructables.com/FJI/NRSI/HU5TGVCN/FJINRSIHU5TGVCN.SQUARE.jpg http://cdn.instructables.com/FJI/NRSI/HU5TGVCN/FJINRSIHU5TGVCN.SMALL.jpg rhodesbread A twist on Peach Cobbler. It's made with Rhodes French Crusty Rolls and tastes divine! Ingredients 8-10 Rhodes™ French Crusty Rolls, thawed 1/2 cup butter, melted 21 oz can Peach pie filling 14 oz can sweetened condensed milk 1/2 teaspoon cinnamon 1/4 teaspoon nutmeg 1 teaspoon vanilla maple syrup,...
By: rhodesbread

Continue Reading »]]>
Fri, 18 Apr 2014 12:52:26 PDT
Portable Bike Washer http://www.instructables.com/id/Portable-Bike-Washer/ http://cdn.instructables.com/F3C/BD9X/HU54MI8K/F3CBD9XHU54MI8K.SQUARE2.jpg http://cdn.instructables.com/F3C/BD9X/HU54MI8K/F3CBD9XHU54MI8K.SQUARE.jpg http://cdn.instructables.com/F3C/BD9X/HU54MI8K/F3CBD9XHU54MI8K.SMALL.jpg josefski Being a mountain biker who lives in an apartment in a rainy part of the world, I frequently find myself in need of a way to hose down my bike at the trailhead. It's also nice to have a way to hose off shoes and digging tools when I come back from a day of working on the trail.  My solution was to b...
By: josefski

Continue Reading »]]>
Fri, 18 Apr 2014 08:59:07 PDT
Glass and Steel Art http://www.instructables.com/id/Glass-and-Steel-Art/ http://cdn.instructables.com/FIH/J3ME/HU48989U/FIHJ3MEHU48989U.SQUARE2.jpg http://cdn.instructables.com/FIH/J3ME/HU48989U/FIHJ3MEHU48989U.SQUARE.jpg http://cdn.instructables.com/FIH/J3ME/HU48989U/FIHJ3MEHU48989U.SMALL.jpg glassman15201 I have always wanted to make steel parts for my glass art. But, I did not have all the free forming tools to work the steel. That was till I found the TechShop in Pittsburgh.  I drew up the parts I needed and got the steel and off to the shop, they have all the forming tools I needed and welders to ...
By: glassman15201

Continue Reading »]]>
Thu, 17 Apr 2014 14:48:49 PDT
Laser-cut Personalized Chess Board http://www.instructables.com/id/Laser-cut-Personalized-Chess-Board/ http://cdn.instructables.com/FNF/9G0T/HU487JUX/FNF9G0THU487JUX.SQUARE2.jpg http://cdn.instructables.com/FNF/9G0T/HU487JUX/FNF9G0THU487JUX.SQUARE.jpg http://cdn.instructables.com/FNF/9G0T/HU487JUX/FNF9G0THU487JUX.SMALL.jpg Samosoul Using Illustrator and a Trotec Laser (I made it at Techshop!), I created a personalized, awesome chess board for my son. (My original intention was to also create chess pieces from his favorite video game, Skylanders, but with a little sense in my brain, I abandoned that part. Had i not started thi...
By: Samosoul

Continue Reading »]]>
Thu, 17 Apr 2014 12:29:33 PDT
Inexpensive Case for Macbook Pro http://www.instructables.com/id/Inexpensive-Case-for-Macbook-Pro/ http://cdn.instructables.com/FGR/T87Y/HU3TNJXX/FGRT87YHU3TNJXX.SQUARE2.jpg http://cdn.instructables.com/FGR/T87Y/HU3TNJXX/FGRT87YHU3TNJXX.SQUARE.jpg http://cdn.instructables.com/FGR/T87Y/HU3TNJXX/FGRT87YHU3TNJXX.SMALL.jpg graydog111 I needed an inexpensive, but very sturdy case for my MacBook Pro (MBP) to carry in my truck.  It needed to be strong enough to fall from the truck cab 6 feet to ground with no damage to the MBP.  I also needed access to the computer without removing it from case. I found a nice used briefcase at a ...
By: graydog111

Continue Reading »]]>
Thu, 17 Apr 2014 11:27:01 PDT
some coins http://www.instructables.com/id/some-coins/ http://cdn.instructables.com/FMS/SMXY/HU488TC8/FMSSMXYHU488TC8.SQUARE2.jpg http://cdn.instructables.com/FMS/SMXY/HU488TC8/FMSSMXYHU488TC8.SQUARE.jpg http://cdn.instructables.com/FMS/SMXY/HU488TC8/FMSSMXYHU488TC8.SMALL.jpg drewscollectibles some of my coins for sale on etsy
By: drewscollectibles

Continue Reading »]]>
Thu, 17 Apr 2014 10:08:41 PDT
Superhero Egg http://www.instructables.com/id/Superhero-Egg/ http://cdn.instructables.com/FLV/1VKH/HU3TMOXC/FLV1VKHHU3TMOXC.SQUARE2.jpg http://cdn.instructables.com/FLV/1VKH/HU3TMOXC/FLV1VKHHU3TMOXC.SQUARE.jpg http://cdn.instructables.com/FLV/1VKH/HU3TMOXC/FLV1VKHHU3TMOXC.SMALL.jpg Zariath Al Mamun Badhon I color the full egg red. Then I draw in the paper.. and stick it with glue..
By: Zariath Al Mamun Badhon

Continue Reading »]]>
Thu, 17 Apr 2014 03:15:03 PDT
Superhero Egg http://www.instructables.com/id/Superheroe-Egg-1/ http://cdn.instructables.com/F94/NFWI/HU3TMOW6/F94NFWIHU3TMOW6.SQUARE2.jpg http://cdn.instructables.com/F94/NFWI/HU3TMOW6/F94NFWIHU3TMOW6.SQUARE.jpg http://cdn.instructables.com/F94/NFWI/HU3TMOW6/F94NFWIHU3TMOW6.SMALL.jpg Zariath Al Mamun Badhon This time I color it blue and draw the kits in paper and stick it with glue...
By: Zariath Al Mamun Badhon

Continue Reading »]]>
Thu, 17 Apr 2014 03:12:27 PDT
Superheroe Egg http://www.instructables.com/id/Superheroe-Egg/ http://cdn.instructables.com/FB1/VWCQ/HU3TMOTE/FB1VWCQHU3TMOTE.SQUARE2.jpg http://cdn.instructables.com/FB1/VWCQ/HU3TMOTE/FB1VWCQHU3TMOTE.SQUARE.jpg http://cdn.instructables.com/FB1/VWCQ/HU3TMOTE/FB1VWCQHU3TMOTE.SMALL.jpg Zariath Al Mamun Badhon First I took a egg and color it red.. After that I color blue in the sides. I took a pencil and draw the spider's web in it's body. I also draw tiny little spider in the middle. At last I draw 2 eyes in paper and stick it in the egg by glue... And TA DA....
By: Zariath Al Mamun Badhon

Continue Reading »]]>
Thu, 17 Apr 2014 03:01:50 PDT
The Finest Nourishment Consulting Alternatives In Toronto http://www.instructables.com/id/The-Finest-Nourishment-Consulting-Alternatives-In-/ http://cdn.instructables.com/FNM/O141/HU1RYZTD/FNMO141HU1RYZTD.SQUARE2.jpg http://cdn.instructables.com/FNM/O141/HU1RYZTD/FNMO141HU1RYZTD.SQUARE.jpg http://cdn.instructables.com/FNM/O141/HU1RYZTD/FNMO141HU1RYZTD.SMALL.jpg torontostrengthcamp Are you wanting to get rid of some weight? If you're overweight since you've a hard time with embracing a well balanced diet, you should think about getting assistance from an expert nutritionist. Making great nutritional decisions is not simple, exceptionally if you do not understand enough about n...
By: torontostrengthcamp

Continue Reading »]]>
Thu, 17 Apr 2014 00:31:09 PDT
Apple Pie French Toast Pancakes http://www.instructables.com/id/Apple-Pie-French-Toast-Pancakes/ http://cdn.instructables.com/F8Y/9MHV/HU1RVMFB/F8Y9MHVHU1RVMFB.SQUARE2.jpg http://cdn.instructables.com/F8Y/9MHV/HU1RVMFB/F8Y9MHVHU1RVMFB.SQUARE.jpg http://cdn.instructables.com/F8Y/9MHV/HU1RVMFB/F8Y9MHVHU1RVMFB.SMALL.jpg kennmcook This was an Idea that I had and wanted to try.  I am not good about writing down measurements, etc.  So, I am sharing the idea not the recipe.  It turned out well, but the recipe could be tweaked.  I made both mini pancakes and larger ones to see how it affected the flavor and process.  Mini-pancake...
By: kennmcook

Continue Reading »]]>
Wed, 16 Apr 2014 06:09:13 PDT
Water fountain with sound and light system(Letourneau EPM project) http://www.instructables.com/id/Water-fountain-with-sound-and-light-systemLetourne/ http://cdn.instructables.com/FEW/GGH3/HU1RVYZL/FEWGGH3HU1RVYZL.SQUARE2.jpg http://cdn.instructables.com/FEW/GGH3/HU1RVYZL/FEWGGH3HU1RVYZL.SQUARE.jpg http://cdn.instructables.com/FEW/GGH3/HU1RVYZL/FEWGGH3HU1RVYZL.SMALL.jpg spedia911 Hello, my name is Namkyoung Lee. Our team made a water fountain with sound and light system. It is a part of LeTourneau university EPM lab project. This water fountain is powered by self contained battery and has 2 arduino unos; one is for the light system and the other for the water system. Thi...
By: spedia911

Continue Reading »]]>
Tue, 15 Apr 2014 21:15:47 PDT
Arduino radar http://www.instructables.com/id/Arduino-radar/ http://cdn.instructables.com/FEJ/3T51/HU1RUEJR/FEJ3T51HU1RUEJR.SQUARE2.jpg http://cdn.instructables.com/FEJ/3T51/HU1RUEJR/FEJ3T51HU1RUEJR.SQUARE.jpg http://cdn.instructables.com/FEJ/3T51/HU1RUEJR/FEJ3T51HU1RUEJR.SMALL.jpg origamiAirControl This is an Arduino radar-well, sort of like one, at least. Materials: 1 x HC-SR04 4 x jumper wires 1 x breadboard 1 x arduino Here is the code for the arduino: /* HC-SR04 Ping distance sensor: VCC to arduino 5v GND to arduino GND Echo to Arduino pin 7 Trig to Arduino pin 8 This sketch originate...
By: origamiAirControl

Continue Reading »]]>
Tue, 15 Apr 2014 17:52:12 PDT
Not Just for Fun http://www.instructables.com/id/Not-Just-for-Fun/ http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SQUARE2.jpg http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SQUARE.jpg http://cdn.instructables.com/FPH/VRTK/HU48941Q/FPHVRTKHU48941Q.SMALL.jpg glassman15201 I started making wood tools for glassblowing so years ago and would spend allot of time making these little paddle ( a tool we use) key chains as giveaway ads. Cut each one out on the band saw and then brand the information in. Then one day at one of my "I made it at TechShop" sessions it hit me. I ...
By: glassman15201

Continue Reading »]]>
Tue, 15 Apr 2014 14:35:26 PDT
Bad idea good lesson http://www.instructables.com/id/Bad-idea-good-lesson/ http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SQUARE2.jpg http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SQUARE.jpg http://cdn.instructables.com/FTM/DR55/H2MYKHCK/FTMDR55H2MYKHCK.SMALL.jpg niall mc I Built this a few years ago I decided to run with the first design idea that came into my mind. The problem is it’s just not a practical table. Its too deep and it can’t really hold anything, I have a TV on it right now. All the other stuff….. DVR, satellite box etc are just sitting in the open pa...
By: niall mc

Continue Reading »]]>
Tue, 15 Apr 2014 10:22:41 PDT
Another anti-tangle tip for earphones http://www.instructables.com/id/Another-anti-tangle-tip-for-earphones/ http://cdn.instructables.com/FVL/DMY5/HU1A9T2J/FVLDMY5HU1A9T2J.SQUARE2.jpg http://cdn.instructables.com/FVL/DMY5/HU1A9T2J/FVLDMY5HU1A9T2J.SQUARE.jpg http://cdn.instructables.com/FVL/DMY5/HU1A9T2J/FVLDMY5HU1A9T2J.SMALL.jpg Ysabeau You need more time to find the stuff than to make. Cost: almost nothing. Oh, and with it, you can add your earburn to your keychain! You need - earphones (earbuds or what you call that) - a ring - a colored band or a small rubber bracelet To make 1/ Insert the band in the ring 2/ carefully shape y...
By: Ysabeau

Continue Reading »]]>
Tue, 15 Apr 2014 08:45:36 PDT
Healthy Oatmeal Peanut Butter Eggs http://www.instructables.com/id/Healthy-Oatmeal-Peanut-Butter-Eggs/ http://cdn.instructables.com/FAN/1VQT/HU1A9SI3/FAN1VQTHU1A9SI3.SQUARE2.jpg http://cdn.instructables.com/FAN/1VQT/HU1A9SI3/FAN1VQTHU1A9SI3.SQUARE.jpg http://cdn.instructables.com/FAN/1VQT/HU1A9SI3/FAN1VQTHU1A9SI3.SMALL.jpg savynaturalista Oatmeal Peanut Butter Easter Eggs Recipe: 2 ½ cups rolled oats 3 tbsps. pb2 (powdered peanut butter)  ¼ cup maple syrup 1 tsp. vanilla 5 tbsps. almond milk 1 tbsp. peanut butter ¼ cup mini chocolate chips (optional) Sprinkles for decoration Plastic eggs Recipe Directions: In a medium bowl mix dry in...
By: savynaturalista

Continue Reading »]]>
Tue, 15 Apr 2014 07:53:13 PDT
Braided Wire Bracelets http://www.instructables.com/id/Braided-Wire-Bracelets/ http://cdn.instructables.com/F97/AL63/HU0GND60/F97AL63HU0GND60.SQUARE2.jpg http://cdn.instructables.com/F97/AL63/HU0GND60/F97AL63HU0GND60.SQUARE.jpg http://cdn.instructables.com/F97/AL63/HU0GND60/F97AL63HU0GND60.SMALL.jpg Little Dragon and Company These bracelets are simple to make. They consist of braided wire with beads added in periodically. I made these with wire that I have had sitting around for ages. It was not branded, but I figure it is the equivalent of florists wire, maybe a little thinner.  Materials: -wire, florists will work -a...
By: Little Dragon and Company

Continue Reading »]]>
Tue, 15 Apr 2014 06:55:32 PDT
FM Radio Jammer Circuit http://www.instructables.com/id/FM-Radio-Jammer-Circuit/ http://cdn.instructables.com/FKK/JMS0/HU0GN94D/FKKJMS0HU0GN94D.SQUARE2.jpg http://cdn.instructables.com/FKK/JMS0/HU0GN94D/FKKJMS0HU0GN94D.SQUARE.jpg http://cdn.instructables.com/FKK/JMS0/HU0GN94D/FKKJMS0HU0GN94D.SMALL.jpg Electronics Hub This is the circuit diagram of simple FM radio jammer. We all very  well known that Jammer circuit produces the high frequency signal which will confuse the receiver of particular system from receiving the signal, even though circuit is working properly, user of the system feels that circuit is not ...
By: Electronics Hub

Continue Reading »]]>
Tue, 15 Apr 2014 04:32:34 PDT
IR Remote Control Switch Circuit http://www.instructables.com/id/IR-Remote-Control-Switch-Circuit/ http://cdn.instructables.com/FKE/GGB8/HU0GT73R/FKEGGB8HU0GT73R.SQUARE2.jpg http://cdn.instructables.com/FKE/GGB8/HU0GT73R/FKEGGB8HU0GT73R.SQUARE.jpg http://cdn.instructables.com/FKE/GGB8/HU0GT73R/FKEGGB8HU0GT73R.SMALL.jpg Electronics Hub This is another useful circuit named IR Remote Control Switch. It is very useful in controlling any house hold appliance with the help of remote. In this project, there are two parts. They are 1. Transmitting Section 2. Receiving Section. Receiving section will be in a stable position which is con...
By: Electronics Hub

Continue Reading »]]>
Tue, 15 Apr 2014 02:05:29 PDT
Egg Roast (Kerala Style Egg Curry) http://www.instructables.com/id/Egg-Roast-Kerala-Style-Egg-Curry/ http://cdn.instructables.com/F0F/BBG9/HU0GSF8L/F0FBBG9HU0GSF8L.SQUARE2.jpg http://cdn.instructables.com/F0F/BBG9/HU0GSF8L/F0FBBG9HU0GSF8L.SQUARE.jpg http://cdn.instructables.com/F0F/BBG9/HU0GSF8L/F0FBBG9HU0GSF8L.SMALL.jpg eateastindian Egg Roast is basically Kerala Style Indian Egg Curry dish popular among Christian community in Southern India and is specially made during Easter. It involves Hard Boiled Eggs and flavourful Curry Sauce. Ingredients/ Method 6-7 Hard Boiled Eggs 2-3 tbsp Oil 2 cup onions 1/2 tsp ginger paste 1/2 tsp...
By: eateastindian

Continue Reading »]]>
Mon, 14 Apr 2014 21:34:44 PDT
Reusable Crayola Candle http://www.instructables.com/id/Reusable-Crayola-Candle/ http://cdn.instructables.com/FLD/LEXH/HU0GLRF1/FLDLEXHHU0GLRF1.SQUARE2.jpg http://cdn.instructables.com/FLD/LEXH/HU0GLRF1/FLDLEXHHU0GLRF1.SQUARE.jpg http://cdn.instructables.com/FLD/LEXH/HU0GLRF1/FLDLEXHHU0GLRF1.SMALL.jpg keithhurly I will teach you how to make a reusable candle out of crayola crayons.  The things you will need are as follows: - Minimum of 4 crayola crayons - Small metal cylinder (can)       - Can opener (if the cylinder still has both faces attached.)       - Make sure that you empty the cylinder of its conte...
By: keithhurly

Continue Reading »]]>
Mon, 14 Apr 2014 21:23:07 PDT
Decorative Kleenex Cover http://www.instructables.com/id/Decorative-Kleenex-Cover/ http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SQUARE2.jpg http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SQUARE.jpg http://cdn.instructables.com/FBJ/NJ9Q/HU09XIQK/FBJNJ9QHU09XIQK.SMALL.jpg JMalmborg This is a nice decorative Kleenexbox Cover that was made with the laser cutter at TechShop in Chandler, AZ I found a website that will make a layout for a box and though I could use it for making my first laser cutter project. The website is http://boxmaker.rahulbotics.com/  I put in the dimensions ...
By: JMalmborg

Continue Reading »]]>
Mon, 14 Apr 2014 18:24:03 PDT
Arduino Fading Light http://www.instructables.com/id/Arduino-Fading-Light/ http://cdn.instructables.com/FFA/LZBG/HTZY4NK9/FFALZBGHTZY4NK9.SQUARE2.jpg http://cdn.instructables.com/FFA/LZBG/HTZY4NK9/FFALZBGHTZY4NK9.SQUARE.jpg http://cdn.instructables.com/FFA/LZBG/HTZY4NK9/FFALZBGHTZY4NK9.SMALL.jpg origamiAirControl This is a Arduino controlled night light. materials: 1 x LED 5 x jumper wires 1 x arduino 1 x photocell 1 x breadboard 1 x 10k ohm resistor Here is the code, don't type the stuff after the //, the code will get too long: // These constants won't change: const int sensorPin = A0;    // pin that t...
By: origamiAirControl

Continue Reading »]]>
Mon, 14 Apr 2014 14:50:41 PDT
Wine tray http://www.instructables.com/id/Wine-tray/ http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SQUARE2.jpg http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SQUARE.jpg http://cdn.instructables.com/FY1/E2CO/HU0591G7/FY1E2COHU0591G7.SMALL.jpg FS2010 For this wine tray I used 2 MDF boards 50cm x 25cm – one for the base and one as a top shelf. Aluminum pipe was sawed to 3 same parts - 15cm each one. In a base plate I drilled 3 through holes and then hollows, about 5 mm depth. On the next step I attached top board to the base in reason to drill 3 ...
By: FS2010

Continue Reading »]]>
Mon, 14 Apr 2014 14:06:34 PDT
Table for cartomancy http://www.instructables.com/id/Table-for-cartomancy/ http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SQUARE2.jpg http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SQUARE.jpg http://cdn.instructables.com/FJE/D4P5/HU058RW8/FJED4P5HU058RW8.SMALL.jpg FS2010 After listening of some gothic band, I decided to make table for spirit seances or cartomancy :) I just drew and sawed needed shapes from a MDF - one board 60cm x 40cm for the table plate, and 2 boards 40cm x 30cm for the legs. "Mysterious symbols" were printed from internet and transferred with car...
By: FS2010

Continue Reading »]]>
Mon, 14 Apr 2014 13:08:37 PDT
Bread and mitre box http://www.instructables.com/id/Bread-and-mitre-box/ http://cdn.instructables.com/FX3/R4DG/HTZY3ZXB/FX3R4DGHTZY3ZXB.SQUARE2.jpg http://cdn.instructables.com/FX3/R4DG/HTZY3ZXB/FX3R4DGHTZY3ZXB.SQUARE.jpg http://cdn.instructables.com/FX3/R4DG/HTZY3ZXB/FX3R4DGHTZY3ZXB.SMALL.jpg Martin Bal├ík Slicing bread has never been more perfect with mitre box, that can also be used as a cutting board and a serving tray. Miter box to help you cut thinner, more consistent slices.  People with disabilities can greatly facilitate slicing bread. Mitre box is also ideal for eggplant, squash, cheese, or...
By: Martin Balák

Continue Reading »]]>
Mon, 14 Apr 2014 11:22:35 PDT
PORTABLE PC DESK http://www.instructables.com/id/PORTABLE-PC-DESK/ http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SQUARE2.jpg http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SQUARE.jpg http://cdn.instructables.com/F9Z/6JY6/HTZY3YI7/F9Z6JY6HTZY3YI7.SMALL.jpg aakashkarekar I TRIED TO BUILD A SMALL STORAGE BOX OR CARRYING CONTAINER FOR ALL THE TOOLS AND EXTRA EQUIPMENTS WHICH I FOUND IN MY HOUSE AND FOR BUILDING THIS I HAD TO MAKE USE OF PC ENCLOSURE(C.P.U)
By: aakashkarekar

Continue Reading »]]>
Mon, 14 Apr 2014 10:26:50 PDT
Creating a Website with iWeb http://www.instructables.com/id/Creating-a-Website-with-iWeb/ http://cdn.instructables.com/F1B/VDN7/HTZUMOM6/F1BVDN7HTZUMOM6.SQUARE2.jpg http://cdn.instructables.com/F1B/VDN7/HTZUMOM6/F1BVDN7HTZUMOM6.SQUARE.jpg http://cdn.instructables.com/F1B/VDN7/HTZUMOM6/F1BVDN7HTZUMOM6.SMALL.jpg graphicallyg I designed a website to sell my handmade, personalized greeting cards.  On the website, customers can view and purchase the card designs I currently have available, or request a custom order.  All purchases can be transacted through PayPal.  To design my website (graphicallygramstad.com), I used the...
By: graphicallyg

Continue Reading »]]>
Mon, 14 Apr 2014 10:09:18 PDT
Baby Crib http://www.instructables.com/id/Baby-Crib/ http://cdn.instructables.com/FNO/777B/HTZUMCV0/FNO777BHTZUMCV0.SQUARE2.jpg http://cdn.instructables.com/FNO/777B/HTZUMCV0/FNO777BHTZUMCV0.SQUARE.jpg http://cdn.instructables.com/FNO/777B/HTZUMCV0/FNO777BHTZUMCV0.SMALL.jpg FS2010 This baby crib can be good for babies till 9-12 months, while large bed is unnecessary. To ensure a greater about of security for children, I found safety requirements in internet. Standard cribs must have slats that are no more 10cm - this is to keep infants from getting their heads stuck between t...
By: FS2010

Continue Reading »]]>
Mon, 14 Apr 2014 07:50:41 PDT
A rechargeable led flashlight with a mobile battery http://www.instructables.com/id/How-to-make-a-rechargeable-led-flashlight-with-a-m/ http://cdn.instructables.com/FPQ/B3J9/HTZ42WS1/FPQB3J9HTZ42WS1.SQUARE2.jpg http://cdn.instructables.com/FPQ/B3J9/HTZ42WS1/FPQB3J9HTZ42WS1.SQUARE.jpg http://cdn.instructables.com/FPQ/B3J9/HTZ42WS1/FPQB3J9HTZ42WS1.SMALL.jpg Darwesh Murad Hello Guys!! This is my first instructable so plz comment positive critics...
By: Darwesh Murad

Continue Reading »]]>
Mon, 14 Apr 2014 06:25:49 PDT
Game of Thrones - I'm not a princess, I'm a khaleesi - Free Cross Stitch PDF Pattern http://www.instructables.com/id/Game-of-Thrones-Im-not-a-princess-Im-a-khaleesi/ http://cdn.instructables.com/FYH/86WI/HTZ84TQT/FYH86WIHTZ84TQT.SQUARE2.jpg http://cdn.instructables.com/FYH/86WI/HTZ84TQT/FYH86WIHTZ84TQT.SQUARE.jpg http://cdn.instructables.com/FYH/86WI/HTZ84TQT/FYH86WIHTZ84TQT.SMALL.jpg avozika Game of Thrones - I'm not a princess, I'm a khaleesi This is a digital PDF file of a cross stitch pattern. You will need to have a PDF reader (like Adobe Reader) to view or print the pattern. The pattern includes: - full color chart with symbols - DMC and Anchor floss legend Fabric: 14 count Aida ...
By: avozika

Continue Reading »]]>
Mon, 14 Apr 2014 01:19:14 PDT
CNC - Electronic Board Tester http://www.instructables.com/id/Electronic-Board-Tester/ http://cdn.instructables.com/FIG/QXBP/HTZ40IGI/FIGQXBPHTZ40IGI.SQUARE2.jpg http://cdn.instructables.com/FIG/QXBP/HTZ40IGI/FIGQXBPHTZ40IGI.SQUARE.jpg http://cdn.instructables.com/FIG/QXBP/HTZ40IGI/FIGQXBPHTZ40IGI.SMALL.jpg FS2010 In the electronics industry sometimes is necessary to test a small quantity of prototype boards. I made this jig as electronic board functionality tester. The top plate composed of black delrin sheet, 6mm thickness. The delrin was used as insulation plate for an electronic board. The surface was don...
By: FS2010

Continue Reading »]]>
Sun, 13 Apr 2014 20:42:26 PDT
CNC - Cutters Stand http://www.instructables.com/id/CNC-Cutters-Stand/ http://cdn.instructables.com/F2E/HDK7/HTZ40FUM/F2EHDK7HTZ40FUM.SQUARE2.jpg http://cdn.instructables.com/F2E/HDK7/HTZ40FUM/F2EHDK7HTZ40FUM.SQUARE.jpg http://cdn.instructables.com/F2E/HDK7/HTZ40FUM/F2EHDK7HTZ40FUM.SMALL.jpg FS2010 This stand was made as a holder for cutters of CNC machine. The stand composed of white polycarbonate sheet, 4mm thickness. Two top plates with the through holes, as per cutters width, and the bottom plate with 2mm depth cells (not through holes). The shapes of all parts were drawn in Dr.Engrave S/W...
By: FS2010

Continue Reading »]]>
Sun, 13 Apr 2014 19:33:08 PDT
Laser Etched Alder wood http://www.instructables.com/id/Laser-Etched-Hickory/ http://cdn.instructables.com/FU0/VU6T/HTVIFZHA/FU0VU6THTVIFZHA.SQUARE2.jpg http://cdn.instructables.com/FU0/VU6T/HTVIFZHA/FU0VU6THTVIFZHA.SQUARE.jpg http://cdn.instructables.com/FU0/VU6T/HTVIFZHA/FU0VU6THTVIFZHA.SMALL.jpg kpcustoms A buddy of mine left a piece of alder wood at my house a while back. He is a good woodworker with a small shop in his garage. I used the laser cutter at TechShop. In CorelDraw  I opened a standard template with the right dimensions and color profile(RGB). The process is really easy with something ...
By: kpcustoms

Continue Reading »]]>
Sun, 13 Apr 2014 16:27:56 PDT
My Projects of 2013 http://www.instructables.com/id/My-Projects-of-2013/ http://cdn.instructables.com/FIL/XUTG/HTVMR4JA/FILXUTGHTVMR4JA.SQUARE2.jpg http://cdn.instructables.com/FIL/XUTG/HTVMR4JA/FILXUTGHTVMR4JA.SQUARE.jpg http://cdn.instructables.com/FIL/XUTG/HTVMR4JA/FILXUTGHTVMR4JA.SMALL.jpg HPandLOTR Hello everyone!  Today is the day I joined instructables.  So I have been on this website for a year now and I would like to thank everyone who followed me and commented on my tutorials and voted for my contest entries.  I really wanted to make a special instructable for my "1 year anniversary" but ...
By: HPandLOTR

Continue Reading »]]>
Sat, 12 Apr 2014 22:05:17 PDT
Printer Fish http://www.instructables.com/id/Printer-Fish/ http://cdn.instructables.com/FQL/ZM3J/HTX6O0SV/FQLZM3JHTX6O0SV.SQUARE2.jpg http://cdn.instructables.com/FQL/ZM3J/HTX6O0SV/FQLZM3JHTX6O0SV.SQUARE.jpg http://cdn.instructables.com/FQL/ZM3J/HTX6O0SV/FQLZM3JHTX6O0SV.SMALL.jpg aehuan This sculpture was made from a disassembled printer and a fish mobile.  The buttons on the printer were used to make the fish's eyes, wiring was used to make waves, the top of the printer formed the ocean floor, and the circuit board serves as an underwater plant.
By: aehuan

Continue Reading »]]>
Sat, 12 Apr 2014 22:03:59 PDT
Phone access through out the house using Gateway Modem http://www.instructables.com/id/Phone-access-through-out-the-house-using-Gateway-M/ http://cdn.instructables.com/FBX/PG3Y/HTZY41LH/FBXPG3YHTZY41LH.SQUARE2.jpg http://cdn.instructables.com/FBX/PG3Y/HTZY41LH/FBXPG3YHTZY41LH.SQUARE.jpg http://cdn.instructables.com/FBX/PG3Y/HTZY41LH/FBXPG3YHTZY41LH.SMALL.jpg z0mb1edad I got tired of having my phone right next to my Cable Gateway/Modem. It made it very inconvenient especially after getting a printer/scanner/fax/copier that needed access to a phone line. I wanted to put my gateway in the attic since I had horrible wifi through out the entire house. I found an alwa...
By: z0mb1edad

Continue Reading »]]>
Sat, 12 Apr 2014 15:20:34 PDT
CNC - Tester Enclosure http://www.instructables.com/id/Surge-Arrester-Tester/ http://cdn.instructables.com/FBG/O931/HTVIE89Z/FBGO931HTVIE89Z.SQUARE2.jpg http://cdn.instructables.com/FBG/O931/HTVIE89Z/FBGO931HTVIE89Z.SQUARE.jpg http://cdn.instructables.com/FBG/O931/HTVIE89Z/FBGO931HTVIE89Z.SMALL.jpg FS2010 This jig was created for testing of lightning protection module - an electronic board which used as surge arrester. For this project I used aluminum plate to provide the fixity of the jig - 16mm thickness, was found in junk :) . The jig composed of polycarbonate sheet (4mm thickness), white for body...
By: FS2010

Continue Reading »]]>
Sat, 12 Apr 2014 14:36:21 PDT