http://www.instructables.com Sat, 7 Nov 2009 13:51:57 PST http://www.instructables.com/id/Thunder-in-a-Test-tube-with-Ethanol-and-Acetone/ cforchemistry This reaction is called "Thunder in a Test tube", sometimes "Testube Thunderstorm", simply becuase internal combustions of ethanol ,acetone (or other similar flammable organic liquid), producing sound, light similar to that of lightning, and the unexpectable result of it.Please rate, comment and sub...
By: cforchemistry]]> science tech Sat, 7 Nov 2009 10:01:29 PST http://www.instructables.com/id/Candy-Corn/ Cereleste This is a relatively easy way to make a candy corn not found in stores: it's fresh, slightly soft, and tastes the same as candy corn.It's perfect for halloween, or any time when sugar is needed. This recipe yields  a slightly softer corn than what's found in stores. It also has that fresh taste that...
By: Cereleste]]> food art Fri, 6 Nov 2009 18:00:35 PST http://www.instructables.com/id/Drawdio-on-stripboard-animation-part-2/ threedforme Part 2 shows all the external components and parts used to complete the drawdio.
By: threedforme]]> tech art Fri, 6 Nov 2009 15:47:32 PST http://www.instructables.com/id/Drawdio-on-stripboard-animation-part-1/ threedforme Part 1 shows the preparation of the stripboard, position of the jumpers and the complete build-up of the electronic components in the order of soldering.The parts list is as follows:Stripboard (veroboard) 21 holes x 5 rowsColoured wire for the jumpersIC1  TLC551 low voltage 555 timer chipIC socket 8...
By: threedforme]]> tech music Fri, 6 Nov 2009 15:28:41 PST http://www.instructables.com/id/Guitar-chords/ JAZ97
By: JAZ97]]> music art Fri, 6 Nov 2009 14:45:57 PST http://www.instructables.com/id/Paper-Models-1/ aj01-01 Here are a few papermodels I have constructedI didn't design all of these, some are from around the web
By: aj01-01]]> craft offbeat Fri, 6 Nov 2009 14:38:35 PST http://www.instructables.com/id/Caprisun-Pouch-Heelstraps-For-Sandals/ masterochicken Alright, so this came from a mixture of inspirations that all kind of happened at once. It started with the arrival of ingrown toenails on both of my feet which required me to wear open toe shoes. So I busted out the old flip-flops, but then remembered something I read about how flip-flops can cause...
By: masterochicken]]> offbeat green Fri, 6 Nov 2009 13:37:32 PST http://www.instructables.com/id/How-To-Hack-Adventure-Quest/ BOOM5601 Adventure Quest is my favourite game on the internet, and in this guide I will show you how to gain the edge.In order to do this, you will need:Cheat Engine 5.5Flash Player 7 Log on Log on to AQ and then go to Battle Monsters, as this is the easiest place to get all the cheats started.  After you...
By: BOOM5601]]> tech Fri, 6 Nov 2009 12:55:47 PST http://www.instructables.com/id/Dominant-Catapults/ chrisiansun Running outta ideas?! tired of egging your friends house and getting in trouble!! BUILD A CATATPULT!!!!! egg from a distance saves the energy and is a good time. Juss couple easy steps you will be egging in nooo time ! we did this because it was project in physics class we look sexy huh :) Tools a...
By: chrisiansun]]> craft tech Fri, 6 Nov 2009 12:51:55 PST http://www.instructables.com/id/How-to-carve-an-eccentric-pumpkin-with-no-special-/ pyro-jim This instructable will show you how anyone can carve a nice design on a pumpkin with absolutely no special tools! This design uses a stencil; many of which you can easily find on the internet. However, you don't need a stencil if you can't get one or want to do this without one.Please be careful as ...
By: pyro-jim]]> craft Fri, 6 Nov 2009 11:18:52 PST http://www.instructables.com/id/camera-mount-hands-free/ idrussian ok you need a piece of copper wire im using thick stuff for stability. im working on a thiner copper line /lines but thats another instructable also you need two plyers and a bolt that will screw in to your camera and two nuts for said bolt now cut off the bolt head you might need a solid surface...
By: idrussian]]> photography outdoors Fri, 6 Nov 2009 10:40:11 PST http://www.instructables.com/id/Duct-Tape-Thimble/ cotter.industries   Accessing the Probability of Reusability and the Occurrence of Keratinized Filaments on Distal Phalanges      If you think you will need to use your thimble more than once,          -or-     If you have hair on your knuckles:           Wrap a section of duct tape around the girth of your middle...
By: cotter.industries]]> home craft Fri, 6 Nov 2009 09:35:24 PST http://www.instructables.com/id/Sleek-and-Simple-Off-Shoulder-Dress/ giannyl Sleek and simple in any material, the off-the-shoulder dress gets a touch of eloquence from the simple detail
By: giannyl]]> offbeat Fri, 6 Nov 2009 09:12:10 PST http://www.instructables.com/id/Easy-Vegan-low-carb-homemade-breakfast-cereal/ megmaine This is one of many uses for the almond meal you will have left over from the process of making almond milk, as detailed in my featured "How to Milk an Almond" Instructable, also featured on Lifehacker. If you do not yet make your own almond milk, please refer to that for an easy method.Easy vegan c...
By: megmaine]]> food green Fri, 6 Nov 2009 08:34:20 PST http://www.instructables.com/id/Girls-Bulid-a-Trebuchet/ legorney I am a junior in high school and in my physics class we were told to either bulid a trebuchet or catapolt.We are a group of girls who were able to bulid a trebuchet that went 29.3 meters.   Building the base In buliding a trebuchet, we start by buliding the base with 2X4's.We use screws to put th...
By: legorney]]> science Fri, 6 Nov 2009 06:47:27 PST http://www.instructables.com/id/The-Word-Clock-Arduino-version/ drj113 Last month I wanted to build a special gift for my beautiful wife, Megan.  She has a teaching background in English, so what better present to make for her than a clock that uses language to tell the time for her desk at work.  The original project that I created used a Microchip PIC microcontroller...
By: drj113]]> tech art Fri, 6 Nov 2009 05:21:50 PST http://www.instructables.com/id/DIY-Pinata-Costume/ boomowthathurt  This Halloween, I wanted a costume that was 1.) cheap and 2.) unique.Because 1.) I need my money for ramen and 2.) I've seen enough of the same "themed tube dress" to know it wasn't worth my ramen money for 1 yard of fabric that everyone else was wearing. 1 night of hotness Materials  You will ...
By: boomowthathurt]]> offbeat craft Fri, 6 Nov 2009 01:32:28 PST http://www.instructables.com/id/Glowing-USB-mousemat/ JavaNut13 While taking a broken LCD screen to bits, (which is very interesting) I was thinking about what I could do with some of the pieces, the things that caught my eye were the plastic backing, used to back-light the screen, and a white sheet, that sits behind it, making all the light go forward.Using the...
By: JavaNut13]]> tech craft Fri, 6 Nov 2009 01:12:27 PST http://www.instructables.com/id/MINI-PIANO/ mistic iNTRO- HOW TO MAKE A MINIATURE INSTRUMENT PLAYED LIKE  A PIANO.         This Instructable illustrates the steps in making a stringed instrument to which piano keys are added and played like a piano over 2 octaves. This Instructable  is based on my earlier Instructable on making a mini-zither {posted...
By: mistic]]> music craft Thu, 5 Nov 2009 22:41:41 PST http://www.instructables.com/id/Build-a-Home-Theater-PC-from-a-Broken-Laptop-and-a/ stuffman In this instructable, I'll show you how to make a home theater PC out of a (somewhat) broken laptop and a mostly empty Tivo chassis.  This is a great way to score a home theater computer (or extender) that looks great and performs better than a store-bought product for around $100.  Why do this? ...
By: stuffman]]> tech Thu, 5 Nov 2009 22:38:06 PST