Instructables: exploring - stepbystep - outside - featured http://www.instructables.com Sun, 7 Feb 2016 14:05:30 PST BLOX v1.01 Homemade Alcohol Stoves http://www.instructables.com/id/Homemade-Alcohol-Stoves/
Homemade Alcohol Stoves - More DIY How To Projects]]> http://cdn.instructables.com/FTJ/WCQ6/IKBFO5CY/FTJWCQ6IKBFO5CY.SQUARE2.jpg http://cdn.instructables.com/FTJ/WCQ6/IKBFO5CY/FTJWCQ6IKBFO5CY.SQUARE.jpg http://cdn.instructables.com/FTJ/WCQ6/IKBFO5CY/FTJWCQ6IKBFO5CY.SMALL.jpg rodski I found that Alcohol stoves was very useful for backpackers because it's compact and portable.And i've seen lot's of instructables here and videos in youtube how to make one.,And i started to make one myself because i found it interesting how it works and i keep on making until i found what suits my...
By: rodski

Continue Reading »]]>
Sun, 7 Feb 2016 07:39:34 PST
Huntsman Knife Part 2 http://www.instructables.com/id/Huntsman-Knife-Part-2/
Huntsman Knife Part 2 - More DIY How To Projects]]> http://cdn.instructables.com/FQN/33YV/IKBFMHYG/FQN33YVIKBFMHYG.SQUARE2.jpg http://cdn.instructables.com/FQN/33YV/IKBFMHYG/FQN33YVIKBFMHYG.SQUARE.jpg http://cdn.instructables.com/FQN/33YV/IKBFMHYG/FQN33YVIKBFMHYG.SMALL.jpg Mc builder 3000 This is part 2 were I make the handle Marking I marked the knife on the wood also I did a few thing to the knife to make I look better Cutting Use a saw or jigsaw to cut handle out then cut in half Glueing Use two part epoxy on handle then apply pressure on knife and wait for dry Sandin...
By: Mc builder 3000

Continue Reading »]]>
Sun, 7 Feb 2016 02:21:20 PST
How To: Change Drum Brake Shoes for Dirt Bikes http://www.instructables.com/id/How-To-Change-Drum-Brake-Shoes-for-Dirt-Bikes/
How To: Change Drum Brake Shoes for Dirt Bikes - More DIY How To Projects]]> http://cdn.instructables.com/FZA/36CB/IKBHVGN5/FZA36CBIKBHVGN5.SQUARE2.jpg http://cdn.instructables.com/FZA/36CB/IKBHVGN5/FZA36CBIKBHVGN5.SQUARE.jpg http://cdn.instructables.com/FZA/36CB/IKBHVGN5/FZA36CBIKBHVGN5.SMALL.jpg DoStuffRight It's Saturday, not just any Saturday, but the Saturday that you are going to go ride the trails on your dirt bike. What's that noise? A soft patting? You look outside, NOOOOOOOOOOO, it is pouring rain outside! You whole day is ruined, you can no longer go to the single track. After crying for a ...
By: DoStuffRight

Continue Reading »]]>
Sun, 7 Feb 2016 05:53:48 PST
Euro Pallet Log Shed - 7 Foot High Approx http://www.instructables.com/id/Euro-Pallet-Log-Shed-7-Foot-High-Approx/
Euro Pallet Log Shed - 7 Foot High Approx - More DIY How To Projects]]> http://cdn.instructables.com/FK3/JWCW/IK7BZBGQ/FK3JWCWIK7BZBGQ.SQUARE2.jpg http://cdn.instructables.com/FK3/JWCW/IK7BZBGQ/FK3JWCWIK7BZBGQ.SQUARE.jpg http://cdn.instructables.com/FK3/JWCW/IK7BZBGQ/FK3JWCWIK7BZBGQ.SMALL.jpg amcintosh5 My wife and I found it was becoming a pain to bend over and reach into our original built pallet DIY home made pallet log sheds. The original one is behind the green tarp. Therefore I embarked on buiding a much taller pallet log shed made from Euro pallets.A - We wouldn't have to bend over and reach...
By: amcintosh5

Continue Reading »]]>
Sat, 6 Feb 2016 18:55:13 PST
Homemade Fire Piston http://www.instructables.com/id/Homemade-Fire-Piston/
Homemade Fire Piston - More DIY How To Projects]]> http://cdn.instructables.com/FJV/D7W3/IKA2D5VS/FJVD7W3IKA2D5VS.SQUARE2.jpg http://cdn.instructables.com/FJV/D7W3/IKA2D5VS/FJVD7W3IKA2D5VS.SQUARE.jpg http://cdn.instructables.com/FJV/D7W3/IKA2D5VS/FJVD7W3IKA2D5VS.SMALL.jpg wartellc I live in lovely Ol' Seattle. It likes to rain here tons, specially during winter, fall, and spring. When it rains, I like to dink around in the machine shop at my place of employment. I am also an avid hiker and camper, so this project fits right in with my interest. I designed and constructed a fi...
By: wartellc

Continue Reading »]]>
Fri, 5 Feb 2016 18:44:30 PST
Making Two Equal Length Double Spliced Dyneema Lines http://www.instructables.com/id/Making-Two-Equal-Length-Double-Spliced-Dyneema-Lin/
Making Two Equal Length Double Spliced Dyneema Lines - More DIY How To Projects]]> http://cdn.instructables.com/F4Y/XNSK/IKA2DPKN/F4YXNSKIKA2DPKN.SQUARE2.jpg http://cdn.instructables.com/F4Y/XNSK/IKA2DPKN/F4YXNSKIKA2DPKN.SQUARE.jpg http://cdn.instructables.com/F4Y/XNSK/IKA2DPKN/F4YXNSKIKA2DPKN.SMALL.jpg moon_goose The purpose of this instructable is to teach you how to make a splice in high tech dyneema line. The challenge to hanging things like hammock chairs or paraglider harnesses is that you would like the two line sets to be the same. It is important that you do your measuring and marking of both lines a...
By: moon_goose

Continue Reading »]]>
Fri, 5 Feb 2016 23:12:18 PST
keeping care of your Fly Line and Fly Reel http://www.instructables.com/id/Keeping-Care-of-Your-Fly-Line-and-Fly-Reel/
keeping care of your Fly Line and Fly Reel - More DIY How To Projects]]> http://cdn.instructables.com/F8I/4OXG/IK8MVK1R/F8I4OXGIK8MVK1R.SQUARE2.jpg http://cdn.instructables.com/F8I/4OXG/IK8MVK1R/F8I4OXGIK8MVK1R.SQUARE.jpg http://cdn.instructables.com/F8I/4OXG/IK8MVK1R/F8I4OXGIK8MVK1R.SMALL.jpg Hook Up TV So it's mid-winter... and all the fly anglers are getting anxious to wade in the cold fast flowing rivers and streams (we're a crazy type of fishermen and fishergirls) and alot of us buy new backing, and fly line... I don't, but only because I know how to keep my stuff in good shape! so let's get st...
By: Hook Up TV

Continue Reading »]]>
Thu, 4 Feb 2016 11:41:32 PST
Quick Skills #4: How to tie Lashings - Pt.1 Square Lashing http://www.instructables.com/id/Quick-Skills-4-How-to-Tie-Lashings-Pt1-Square-Lash/
Quick Skills #4: How to tie Lashings - Pt.1 Square Lashing - More DIY How To Projects]]> http://cdn.instructables.com/FKT/W0NY/IK8MWNJW/FKTW0NYIK8MWNJW.SQUARE2.jpg http://cdn.instructables.com/FKT/W0NY/IK8MWNJW/FKTW0NYIK8MWNJW.SQUARE.jpg http://cdn.instructables.com/FKT/W0NY/IK8MWNJW/FKTW0NYIK8MWNJW.SMALL.jpg Lets_Prep_Together Hi everyone,this week I decided to continue my Quick Skills series with a new mini series. Based on the previous videos & Instructables about Knots for Survival I'm going to show a number of different lashings for various survival, bush craft & general outdoor uses. The first part showcases the squa...
By: Lets_Prep_Together

Continue Reading »]]>
Thu, 4 Feb 2016 14:23:51 PST
Shopping Cart Sifter http://www.instructables.com/id/Shopping-Cart-Sifter/
Shopping Cart Sifter - More DIY How To Projects]]> http://cdn.instructables.com/F8Q/NQBT/IK75CA5N/F8QNQBTIK75CA5N.SQUARE2.jpg http://cdn.instructables.com/F8Q/NQBT/IK75CA5N/F8QNQBTIK75CA5N.SQUARE.jpg http://cdn.instructables.com/F8Q/NQBT/IK75CA5N/F8QNQBTIK75CA5N.SMALL.jpg dewey302 As you will quickly notice this dirt and rock sifter is very basic and not terrifically inventive. On the other hand, it does demonstrate how folks can turn a bit of trash into a bit of treasure. It’s crude but cheap...just like me.The Shopping Cart:Obviously, don’t rush off to your nearest gro...
By: dewey302

Continue Reading »]]>
Wed, 3 Feb 2016 14:30:07 PST
Adaptive Tadpole Trike http://www.instructables.com/id/Adaptive-Tadpole-Trike/
Adaptive Tadpole Trike - More DIY How To Projects]]> http://cdn.instructables.com/FK9/6OLU/IK75BK2L/FK96OLUIK75BK2L.SQUARE2.jpg http://cdn.instructables.com/FK9/6OLU/IK75BK2L/FK96OLUIK75BK2L.SQUARE.jpg http://cdn.instructables.com/FK9/6OLU/IK75BK2L/FK96OLUIK75BK2L.SMALL.jpg dewey302 This is another one of our church’s adaptive trikes made for children experiencing difficulty balancing, pedaling, steering or riding a traditional bike. See the following Instructable for a more detailed description of our church’s program. http://www.instructables.com/id/16-Adaptive-Bike/This t...
By: dewey302

Continue Reading »]]>
Wed, 3 Feb 2016 13:05:50 PST
How to make yourself into a Bird! http://www.instructables.com/id/How-to-Be-a-Bird/
How to make yourself into a Bird! - More DIY How To Projects]]> http://cdn.instructables.com/FCG/3IOR/IK5S1WH5/FCG3IORIK5S1WH5.SQUARE2.jpg http://cdn.instructables.com/FCG/3IOR/IK5S1WH5/FCG3IORIK5S1WH5.SQUARE.jpg http://cdn.instructables.com/FCG/3IOR/IK5S1WH5/FCG3IORIK5S1WH5.SMALL.jpg moon_goose The early and mid 60's saw advancements to ripstop nylon descent devices in both France and the United States. Ripstop nylon is a material that was used to replace silk parachutes in the 1940's. The official Ram Air Canopy was invented in 1963 and in the next year a contraption was built and launche...
By: moon_goose

Continue Reading »]]>
Tue, 2 Feb 2016 22:55:50 PST
Fishing Lure - Lipless Crank Bait http://www.instructables.com/id/Fishing-Lure-Lipless-Crank-Bait/
Fishing Lure - Lipless Crank Bait - More DIY How To Projects]]> http://cdn.instructables.com/FWB/QMP6/IK5S3342/FWBQMP6IK5S3342.SQUARE2.jpg http://cdn.instructables.com/FWB/QMP6/IK5S3342/FWBQMP6IK5S3342.SQUARE.jpg http://cdn.instructables.com/FWB/QMP6/IK5S3342/FWBQMP6IK5S3342.SMALL.jpg Corasaurus Rex What better way to enter the water then with a Fishing Lure!!Being an avid fishermen and living in Canada I experience fishing withdrawal in the early winter months when its too cold to open water fish and there isn't enough ice yet to ice fish. To help curb my need to fish I decided to make a lure...
By: Corasaurus Rex

Continue Reading »]]>
Wed, 3 Feb 2016 07:52:35 PST
Haley's Teardrop Camper http://www.instructables.com/id/Haleys-Teardrop-Camper/
Haley's Teardrop Camper - More DIY How To Projects]]> http://cdn.instructables.com/F5O/XAPZ/IK4ALLQL/F5OXAPZIK4ALLQL.SQUARE2.jpg http://cdn.instructables.com/F5O/XAPZ/IK4ALLQL/F5OXAPZIK4ALLQL.SQUARE.jpg http://cdn.instructables.com/F5O/XAPZ/IK4ALLQL/F5OXAPZIK4ALLQL.SMALL.jpg HaleyP5 This is the perfect project for a recent graduate with no job and whose dad owns a cabinet workshop (me). I was able to use a lot of repurposed materials in the build and keep costs down. I lost track of the exact budget but I spent between $1,000 - $1,500. For parts of the build, I used very expen...
By: HaleyP5

Continue Reading »]]>
Tue, 2 Feb 2016 09:59:21 PST
Ultimate Survivor Paracord Belt with Emergency Pack Buckle (Under $20) http://www.instructables.com/id/Ultimate-Survivor-Paracord-Belt-With-Emergency-Pac/
Ultimate Survivor Paracord Belt with Emergency Pack Buckle (Under $20) - More DIY How To Projects]]> http://cdn.instructables.com/FZ1/5RD8/IK4CLI1H/FZ15RD8IK4CLI1H.SQUARE2.jpg http://cdn.instructables.com/FZ1/5RD8/IK4CLI1H/FZ15RD8IK4CLI1H.SQUARE.jpg http://cdn.instructables.com/FZ1/5RD8/IK4CLI1H/FZ15RD8IK4CLI1H.SMALL.jpg alanjamesblair I am going to start this 'ible with a plea. If you've been wanting an Instructable about making a full-on paracord belt, please vote for me if you like this project. I don't need to win first, but if you found this 'ible worthy, please help me get one of those prizes for braving the elements. This i...
By: alanjamesblair

Continue Reading »]]>
Mon, 1 Feb 2016 23:03:09 PST
Valentine Fire Starters http://www.instructables.com/id/Valentine-Fire-Starters/
Valentine Fire Starters - More DIY How To Projects]]> http://cdn.instructables.com/FPB/OCFP/GY4RTR89/FPBOCFPGY4RTR89.SQUARE2.jpg http://cdn.instructables.com/FPB/OCFP/GY4RTR89/FPBOCFPGY4RTR89.SQUARE.jpg http://cdn.instructables.com/FPB/OCFP/GY4RTR89/FPBOCFPGY4RTR89.SMALL.jpg pezzasaurus These make perfect gifts for: That person who has everything, Outdoor enthusiasts, Wood stove owners, or ANYONE who enjoys summer BBQ's but doesn't like the hassle  of getting the grill going. They are very simple to make and require very few supplies. Who doesn't like, easy,thrifty, and practical g...
By: pezzasaurus

Continue Reading »]]>
Thu, 2 Feb 2012 13:21:54 PST
ABS Gun Rest http://www.instructables.com/id/ABS-Gun-Rest/
ABS Gun Rest - More DIY How To Projects]]> http://cdn.instructables.com/F24/70F9/IK4CJY1P/F2470F9IK4CJY1P.SQUARE2.jpg http://cdn.instructables.com/F24/70F9/IK4CJY1P/F2470F9IK4CJY1P.SQUARE.jpg http://cdn.instructables.com/F24/70F9/IK4CJY1P/F2470F9IK4CJY1P.SMALL.jpg Slater552 This is an Instructable on how to make an ABS gun rest. It is my first Instructable and my first homemade Gun rest so bear with me. Materials Note: Materials list does not match picture exactly (4th end cap missing) Two and a half Feet of 1.5 inch ABS Pipe 1.5 inch, three into one ABS fitting 1.5...
By: Slater552

Continue Reading »]]>
Mon, 1 Feb 2016 11:27:29 PST
EASY AND EFFECTIVE FIRE STARTERS!!! http://www.instructables.com/id/EASY-AND-EFFECTIVE-FIRE-STARTERS/
EASY AND EFFECTIVE FIRE STARTERS!!! - More DIY How To Projects]]> http://cdn.instructables.com/FLB/EJ0K/IK2V1X4Z/FLBEJ0KIK2V1X4Z.SQUARE2.jpg http://cdn.instructables.com/FLB/EJ0K/IK2V1X4Z/FLBEJ0KIK2V1X4Z.SQUARE.jpg http://cdn.instructables.com/FLB/EJ0K/IK2V1X4Z/FLBEJ0KIK2V1X4Z.SMALL.jpg DEEJAY642 Have you ever had to spend hours on your hands and knees during a cold, damp, windy night trying to start your suborn fire??? if so then i know how you felt about it..... TERRIBLE!!! well say good bye to those horrible times because here it a super easy and effective fire starter that will have your...
By: DEEJAY642

Continue Reading »]]>
Sun, 31 Jan 2016 20:33:02 PST
Salt Water Purifier http://www.instructables.com/id/Salt-Water-Purifier/
Salt Water Purifier - More DIY How To Projects]]> http://cdn.instructables.com/F8X/5CYI/IK2UZAOA/F8X5CYIIK2UZAOA.SQUARE2.jpg http://cdn.instructables.com/F8X/5CYI/IK2UZAOA/F8X5CYIIK2UZAOA.SQUARE.jpg http://cdn.instructables.com/F8X/5CYI/IK2UZAOA/F8X5CYIIK2UZAOA.SMALL.jpg Eddie the Invemtor In this Instructable I will show you how to build a salt water purifier. When using this it will produce about a third of a cup of drinkable water an hour. Materials Metal canEmpty soda canAluminum foil2-3 ft of tubingRubber bandTowel / paper towelHot glue gunSizzors Now we will make the canis...
By: Eddie the Invemtor

Continue Reading »]]>
Sun, 31 Jan 2016 19:22:43 PST
DIY Para Cord Identification Tags http://www.instructables.com/id/DIY-Para-Cord-Identification-Tags/
DIY Para Cord Identification Tags - More DIY How To Projects]]> http://cdn.instructables.com/F4S/BDSW/IK2UZRU2/F4SBDSWIK2UZRU2.SQUARE2.jpg http://cdn.instructables.com/F4S/BDSW/IK2UZRU2/F4SBDSWIK2UZRU2.SQUARE.jpg http://cdn.instructables.com/F4S/BDSW/IK2UZRU2/F4SBDSWIK2UZRU2.SMALL.jpg HHB13 These tags are great for putting on suit cases or for travelling bags or for school bags. What you will need You will need scissors, a lighter or some source of flame to whip the ends and the para cord. You can make this as big or as small as you want so I have left the measurements of how much p...
By: HHB13

Continue Reading »]]>
Sun, 31 Jan 2016 19:20:35 PST
BUILDING a DOBSONIAN TELESCOPE MOUNT http://www.instructables.com/id/BUILDING-a-DOBSONIAN-TELESCOPE-MOUNT/
BUILDING a DOBSONIAN TELESCOPE MOUNT - More DIY How To Projects]]> http://cdn.instructables.com/FCB/90T6/IK2X5PS1/FCB90T6IK2X5PS1.SQUARE2.jpg http://cdn.instructables.com/FCB/90T6/IK2X5PS1/FCB90T6IK2X5PS1.SQUARE.jpg http://cdn.instructables.com/FCB/90T6/IK2X5PS1/FCB90T6IK2X5PS1.SMALL.jpg kurtzepp I have an Orion 203mm (8-inch) reflector telescope (f/4.9) that came as a package deal with the Sirius GoTo mount. However, I purchased an Orion ED80 80mm (f/7.5) refractor telescope to use with the GoTo mount for astrophotography. As a result, the reflector began to collect dust, so I decided to ...
By: kurtzepp

Continue Reading »]]>
Sun, 31 Jan 2016 17:38:01 PST
SUV MicroCamper - Fat Berta 3.0 http://www.instructables.com/id/Skoda-Yeti-MicroCamper-Fat-Berta-30/
SUV MicroCamper - Fat Berta 3.0 - More DIY How To Projects]]> http://cdn.instructables.com/FKR/9BD2/IJYUVXEJ/FKR9BD2IJYUVXEJ.SQUARE2.jpg http://cdn.instructables.com/FKR/9BD2/IJYUVXEJ/FKR9BD2IJYUVXEJ.SQUARE.jpg http://cdn.instructables.com/FKR/9BD2/IJYUVXEJ/FKR9BD2IJYUVXEJ.SMALL.jpg dtextor This is a modular SUV/station wagon based camper setup, that sleeps two in luxury, has ample storage space and costs almost nothing. Additionally, I'll show you how to make a trunk tent, magnetic mosquito screens, thermal flaps and much more.For those of you who are new to Fat Berta, in 2013 I built...
By: dtextor

Continue Reading »]]>
Sun, 31 Jan 2016 10:55:52 PST
How To Make Your Shoes Waterproof http://www.instructables.com/id/How-to-Make-Your-Shoes-Waterproof/
How To Make Your Shoes Waterproof - More DIY How To Projects]]> http://cdn.instructables.com/FYS/SNLW/IK0F01WT/FYSSNLWIK0F01WT.SQUARE2.jpg http://cdn.instructables.com/FYS/SNLW/IK0F01WT/FYSSNLWIK0F01WT.SQUARE.jpg http://cdn.instructables.com/FYS/SNLW/IK0F01WT/FYSSNLWIK0F01WT.SMALL.jpg ImanuelEzra567 If the weather is rainy,and you're outside the home,of course you will get wet.This Instructable will show you how to make your shoes waterproof.Beside shoes you can also do this to your other stuff!So,let's get started! What you need: What you need is simple,This Instructables just needs:-Candle...
By: ImanuelEzra567

Continue Reading »]]>
Sat, 30 Jan 2016 03:20:39 PST
Adaptive Bike http://www.instructables.com/id/16-Adaptive-Bike/
Adaptive Bike - More DIY How To Projects]]> http://cdn.instructables.com/FC9/2703/IK1FJ9HY/FC92703IK1FJ9HY.SQUARE2.jpg http://cdn.instructables.com/FC9/2703/IK1FJ9HY/FC92703IK1FJ9HY.SQUARE.jpg http://cdn.instructables.com/FC9/2703/IK1FJ9HY/FC92703IK1FJ9HY.SMALL.jpg dewey302 Our church operates a bicycle ministry which repairs old donated or discarded bicycles for distribution to financially deserving children and to homeless individuals in need of transportation. This past year we expanded the program in a new direction and began building adaptive bikes and trikes for...
By: dewey302

Continue Reading »]]>
Sat, 30 Jan 2016 11:41:10 PST
Fire Pit Patio Project http://www.instructables.com/id/Fire-Pit-Patio-Project/
Fire Pit Patio Project - More DIY How To Projects]]> http://cdn.instructables.com/F9R/KSK7/IK1HP1L8/F9RKSK7IK1HP1L8.SQUARE2.jpg http://cdn.instructables.com/F9R/KSK7/IK1HP1L8/F9RKSK7IK1HP1L8.SQUARE.jpg http://cdn.instructables.com/F9R/KSK7/IK1HP1L8/F9RKSK7IK1HP1L8.SMALL.jpg jbalza Introduction:My wife and I decided to convert an area on the back yard as a safe place to put a fire pit. We want to enjoy relaxing time watching the fire and roast marshmallows for the little ones.For the project we budgeted $500.We got our inspiration and ideas by searching online, watching youtu...
By: jbalza

Continue Reading »]]>
Sat, 30 Jan 2016 14:52:53 PST
Hub Motor Delta Trike http://www.instructables.com/id/Hub-Motor-Delta-Trike/
Hub Motor Delta Trike - More DIY How To Projects]]> http://cdn.instructables.com/FWI/9EVA/IJYUP7GK/FWI9EVAIJYUP7GK.SQUARE2.jpg http://cdn.instructables.com/FWI/9EVA/IJYUP7GK/FWI9EVAIJYUP7GK.SQUARE.jpg http://cdn.instructables.com/FWI/9EVA/IJYUP7GK/FWI9EVAIJYUP7GK.SMALL.jpg dewey302 This is my second electric trike and an improvement over my first effort which can be seen here http://www.instructables.com/id/Custom-Electric-Tr... and here http://www.instructables.com/id/Our-Dogs-100-Recum...The new trike features full suspension, rear pedal, a 1000w hub motor, disk brake (rea...
By: dewey302

Continue Reading »]]>
Fri, 29 Jan 2016 18:28:10 PST
4 Ways to make Multi-Surface LED Throwies - Taggies http://www.instructables.com/id/4-Ways-to-Make-Multi-Surface-LED-Tags-Taggie-/
4 Ways to make Multi-Surface LED Throwies - Taggies - More DIY How To Projects]]> http://cdn.instructables.com/FQO/CGGX/IJYUSJHN/FQOCGGXIJYUSJHN.SQUARE2.jpg http://cdn.instructables.com/FQO/CGGX/IJYUSJHN/FQOCGGXIJYUSJHN.SQUARE.jpg http://cdn.instructables.com/FQO/CGGX/IJYUSJHN/FQOCGGXIJYUSJHN.SMALL.jpg Lets_Prep_Together Hi everyone,today I'm publishing my 20th Instructable & YouTube video! To do so I decided to roll 4 Mini Projects into one and hope that you'll like it. The inspiration for this project came from so called "throwies" which are basically powered LED's with a magnet that can be thrown against metallic...
By: Lets_Prep_Together

Continue Reading »]]>
Thu, 28 Jan 2016 16:14:00 PST
Thinsulate Sweater mittens with a HotHands pocket! http://www.instructables.com/id/Thinsulate-Sweater-Mittens-With-a-HotHands-Pocket/
Thinsulate Sweater mittens with a HotHands pocket! - More DIY How To Projects]]> http://cdn.instructables.com/FPV/KGDG/IJYUKWHC/FPVKGDGIJYUKWHC.SQUARE2.jpg http://cdn.instructables.com/FPV/KGDG/IJYUKWHC/FPVKGDGIJYUKWHC.SQUARE.jpg http://cdn.instructables.com/FPV/KGDG/IJYUKWHC/FPVKGDGIJYUKWHC.SMALL.jpg twhitney401 Warm mittens are actually worth their weight in gold, at least here in Wisconsin. Gloves are easier to get and we have gloves in my house, but my 12 year old son told me recently that his hands were always cold when he went outside. This concerned me. Partly because I am his mother and partly be...
By: twhitney401

Continue Reading »]]>
Fri, 29 Jan 2016 09:59:37 PST
Firestarter http://www.instructables.com/id/Firestarter-1/
Firestarter - More DIY How To Projects]]> http://cdn.instructables.com/FEW/BCDU/IJYUHWV1/FEWBCDUIJYUHWV1.SQUARE2.jpg http://cdn.instructables.com/FEW/BCDU/IJYUHWV1/FEWBCDUIJYUHWV1.SQUARE.jpg http://cdn.instructables.com/FEW/BCDU/IJYUHWV1/FEWBCDUIJYUHWV1.SMALL.jpg Austin Noble This firestarter design is a project that I have been working on for almost a year. This is not an especially easy to make firestarter, but it is very effective. It is rock solid, self lighting, burns for 10+ minutes, has a large flame, it is wind and rain resistant, it is almost smokeless, and fina...
By: Austin Noble

Continue Reading »]]>
Thu, 28 Jan 2016 15:54:13 PST
World's Smallest Survival kit V2.0 http://www.instructables.com/id/Worlds-Smallest-Survival-Kit-V20/
World's Smallest Survival kit V2.0 - More DIY How To Projects]]> http://cdn.instructables.com/FNC/QRQE/IJWWRP91/FNCQRQEIJWWRP91.SQUARE2.jpg http://cdn.instructables.com/FNC/QRQE/IJWWRP91/FNCQRQEIJWWRP91.SQUARE.jpg http://cdn.instructables.com/FNC/QRQE/IJWWRP91/FNCQRQEIJWWRP91.SMALL.jpg Akinventor Meet the world's smallest survival kit V2.0! If you have not had a chance to check out the original follow this link:V1.0This version has been fully submerged in water for over an hour, frozen into a block of ice, and much more. This is a general guide to create your own kit. There was still plenty ...
By: Akinventor

Continue Reading »]]>
Thu, 28 Jan 2016 14:22:33 PST
Make your own quick and easy zip tie & ply mini boat - maximum fun for the least money! http://www.instructables.com/id/Make-Your-Own-Quick-and-Easy-Zip-Tie-Ply-Mini-Boat/
Make your own quick and easy zip tie & ply mini boat - maximum fun for the least money! - More DIY How To Projects]]> http://cdn.instructables.com/FH1/EMPM/IIRTWAU5/FH1EMPMIIRTWAU5.SQUARE2.jpg http://cdn.instructables.com/FH1/EMPM/IIRTWAU5/FH1EMPMIIRTWAU5.SQUARE.jpg http://cdn.instructables.com/FH1/EMPM/IIRTWAU5/FH1EMPMIIRTWAU5.SMALL.jpg PaulA42 IntroI'm entering this build for the 'zip tie challenge' and the 'brave the elements' contests. It's a boat I made using zip ties with just two sheets of plywood and I live in a town which is surrounded on three sides by water, in the middle of a river estuary.It costs very little and can be made ea...
By: PaulA42

Continue Reading »]]>
Wed, 30 Dec 2015 11:30:00 PST
Arrow fletching: Southeastern Two Fletch Method http://www.instructables.com/id/Arrow-Fletching-Southeastern-Two-Fletch-Method/
Arrow fletching: Southeastern Two Fletch Method - More DIY How To Projects]]> http://cdn.instructables.com/FTC/AQHF/IJWWMZ8H/FTCAQHFIJWWMZ8H.SQUARE2.jpg http://cdn.instructables.com/FTC/AQHF/IJWWMZ8H/FTCAQHFIJWWMZ8H.SQUARE.jpg http://cdn.instructables.com/FTC/AQHF/IJWWMZ8H/FTCAQHFIJWWMZ8H.SMALL.jpg robolimbo In this Instructable I will describe how to prepare feathers for arrow fletching and then how to attach them to your arrow shaft. Years ago my friend and bowmaster got me into primitive archery and he showed me the Southeastern Two Fletch Method of arrow fletching and it has been my trademark ever ...
By: robolimbo

Continue Reading »]]>
Wed, 27 Jan 2016 12:32:43 PST
How To Fix Double-Vision on Binoculars http://www.instructables.com/id/How-to-Fix-Double-Vision-on-Binoculars/
How To Fix Double-Vision on Binoculars - More DIY How To Projects]]> http://cdn.instructables.com/FDR/NG78/IJVRY2TC/FDRNG78IJVRY2TC.SQUARE2.jpg http://cdn.instructables.com/FDR/NG78/IJVRY2TC/FDRNG78IJVRY2TC.SQUARE.jpg http://cdn.instructables.com/FDR/NG78/IJVRY2TC/FDRNG78IJVRY2TC.SMALL.jpg alanjamesblair This How To is about recollimating (or fixing double-vision) on binoculars. Before proceeding, you should check to see if your binocs are under warranty, because following this 'ible will most likely void any of those.Also, the instruction set herein is true for all of the binocs I've repaired, whic...
By: alanjamesblair

Continue Reading »]]>
Tue, 26 Jan 2016 14:35:39 PST
Fitted Mattress Groundsheet http://www.instructables.com/id/Fitted-Mattress-Groundsheet/
Fitted Mattress Groundsheet - More DIY How To Projects]]> http://cdn.instructables.com/F0A/OQOY/IJSXH74C/F0AOQOYIJSXH74C.SQUARE2.jpg http://cdn.instructables.com/F0A/OQOY/IJSXH74C/F0AOQOYIJSXH74C.SQUARE.jpg http://cdn.instructables.com/F0A/OQOY/IJSXH74C/F0AOQOYIJSXH74C.SMALL.jpg omni96 This guide will help you make a lightweight groundsheet that fits an inflatable mattress perfectly.Though you can simply use a plain piece of material, fitting the mattress into folds in the groundsheet, allows better protection, because the mattress will always be above the groundsheet. Materials...
By: omni96

Continue Reading »]]>
Mon, 25 Jan 2016 10:05:06 PST
Cattle Horse Mineral Feeder http://www.instructables.com/id/Cattle-Horse-Mineral-Feeder/
Cattle Horse Mineral Feeder - More DIY How To Projects]]> http://cdn.instructables.com/FB6/PML7/IJSXG7AM/FB6PML7IJSXG7AM.SQUARE2.jpg http://cdn.instructables.com/FB6/PML7/IJSXG7AM/FB6PML7IJSXG7AM.SQUARE.jpg http://cdn.instructables.com/FB6/PML7/IJSXG7AM/FB6PML7IJSXG7AM.SMALL.jpg wmwinkle This instructable creates a mineral feeder for cattle horses or any farm animal that can flip up the lid. This design was created after purchasing a round commercial product that operates on the same principal but is significantly more expensive. Cattle and horses learn quickly to flip up the fle...
By: wmwinkle

Continue Reading »]]>
Mon, 25 Jan 2016 08:31:24 PST
Bicycle Tool Roll http://www.instructables.com/id/Bicycle-Tool-Roll/
Bicycle Tool Roll - More DIY How To Projects]]> http://cdn.instructables.com/FWK/4EE8/IJRHOAWI/FWK4EE8IJRHOAWI.SQUARE2.jpg http://cdn.instructables.com/FWK/4EE8/IJRHOAWI/FWK4EE8IJRHOAWI.SQUARE.jpg http://cdn.instructables.com/FWK/4EE8/IJRHOAWI/FWK4EE8IJRHOAWI.SMALL.jpg bonercycle I have a nice tool roll which I received as "schwag" at a trade show. It does its job nicely without overdoing it. It only has 3 pockets, which I like, for a tube, an inflator and a multi-tool. For most on road riding I generally refuse to carry more. My one minor gripe with this tool roll is that I...
By: bonercycle

Continue Reading »]]>
Sat, 23 Jan 2016 18:29:35 PST
Propane Tank Wood Stove for $5 http://www.instructables.com/id/Propane-Tank-Wood-Stove-for-5/
Propane Tank Wood Stove for $5 - More DIY How To Projects]]> http://cdn.instructables.com/FW4/IMZE/IJRHMCQA/FW4IMZEIJRHMCQA.SQUARE2.jpg http://cdn.instructables.com/FW4/IMZE/IJRHMCQA/FW4IMZEIJRHMCQA.SQUARE.jpg http://cdn.instructables.com/FW4/IMZE/IJRHMCQA/FW4IMZEIJRHMCQA.SMALL.jpg Joepatrick This wood stove was solely made from1 lb propane tank4 nuts/bolts3 in Copper pipe sectionTin wire solderToolsblow torchangle grinder(cutoff wheel)DrillNOTICE : The pictures of the flame where not caused by wood which means that it does not look as well as it can in the picture. when you are burning...
By: Joepatrick

Continue Reading »]]>
Sat, 23 Jan 2016 18:26:01 PST
Winter Fun - Frozen Bubbles http://www.instructables.com/id/WINTER-FUN-FROZEN-BUBBLES/
Winter Fun - Frozen Bubbles - More DIY How To Projects]]> http://cdn.instructables.com/FGY/Z31E/IJQNZXOW/FGYZ31EIJQNZXOW.SQUARE2.jpg http://cdn.instructables.com/FGY/Z31E/IJQNZXOW/FGYZ31EIJQNZXOW.SQUARE.jpg http://cdn.instructables.com/FGY/Z31E/IJQNZXOW/FGYZ31EIJQNZXOW.SMALL.jpg pi526 Fun with bubbles isn't just for long, lazy summer days. Frosty cold winter weather with temperatures dipping below 20 degrees F and 3 simple ingredients are what we used to make beautiful frozen bubbles. Our thermometer dipped to -12 degrees F when I took all of these photos. Important Camera Not...
By: pi526

Continue Reading »]]>
Sat, 23 Jan 2016 06:42:57 PST
Boot dryer http://www.instructables.com/id/Boot-dryer/
Boot dryer - More DIY How To Projects]]> http://cdn.instructables.com/FJJ/1WLR/I6NIHDZE/FJJ1WLRI6NIHDZE.SQUARE2.jpg http://cdn.instructables.com/FJJ/1WLR/I6NIHDZE/FJJ1WLRI6NIHDZE.SQUARE.jpg http://cdn.instructables.com/FJJ/1WLR/I6NIHDZE/FJJ1WLRI6NIHDZE.SMALL.jpg drosenkranz cheap DIY boot dryer with parts from a leftover plumbing project parts needed are four, 2"elbows two, 2" T's one, 2" Yone, 2" fernco ci/plastic/copper/steel to ci/plastic/copper/steeland at least 3 feet of 2 inch PVC pipe cutting and assembly cut 1 length of PVC pipe 16 inches long then cut t...
By: drosenkranz

Continue Reading »]]>
Sun, 1 Mar 2015 21:36:18 PST
gentleman's ski poles http://www.instructables.com/id/gentlemans-ski-poles/
gentleman's ski poles - More DIY How To Projects]]> http://cdn.instructables.com/FCX/AQMZ/GYVDI2AM/FCXAQMZGYVDI2AM.SQUARE2.jpg http://cdn.instructables.com/FCX/AQMZ/GYVDI2AM/FCXAQMZGYVDI2AM.SQUARE.jpg http://cdn.instructables.com/FCX/AQMZ/GYVDI2AM/FCXAQMZGYVDI2AM.SMALL.jpg mikeasaurus Skiing can be a thirsty sport. Your extra large ski jacket may have many pockets to carry some quintessential quenching quaff, but it's already full with goggles, sunglasses, handwarmers, cell phone, MP3 player, headphones, and that amusingly-shaped stick you found when you went off-trail, so there’...
By: mikeasaurus

Continue Reading »]]>
Wed, 22 Feb 2012 00:17:16 PST
Stag Antler Knife Handle (the easy way) http://www.instructables.com/id/Stag-Antler-Knife-Handle-the-Easy-Way/
Stag Antler Knife Handle (the easy way) - More DIY How To Projects]]> http://cdn.instructables.com/FAZ/7W50/IJN9H4NN/FAZ7W50IJN9H4NN.SQUARE2.jpg http://cdn.instructables.com/FAZ/7W50/IJN9H4NN/FAZ7W50IJN9H4NN.SQUARE.jpg http://cdn.instructables.com/FAZ/7W50/IJN9H4NN/FAZ7W50IJN9H4NN.SMALL.jpg lonesoulsurfer My local tip has a shop and it’s great. Most things are only a couple of bucks and you never know what you will find. It always amazes me what people are willing to throw away instead of just giving it to someone, or even just sticking on their front nature strip for passer-by’s to collect. Whil...
By: lonesoulsurfer

Continue Reading »]]>
Thu, 21 Jan 2016 02:21:52 PST
Star Button Knot Key Chain/Bracelet http://www.instructables.com/id/Star-Button-Knot-Key-ChainBracelet/
Star Button Knot Key Chain/Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/F9N/3FUK/IJN7DP72/F9N3FUKIJN7DP72.SQUARE2.jpg http://cdn.instructables.com/F9N/3FUK/IJN7DP72/F9N3FUKIJN7DP72.SQUARE.jpg http://cdn.instructables.com/F9N/3FUK/IJN7DP72/F9N3FUKIJN7DP72.SMALL.jpg BARKing I have used this as my signature gift since 19873 Strand Plait (Braid)Mathew Walker Knot6 Strand Plait5 or 6 Strand Star Button Knot Some examples of the Star Button Knot, Mathew Walker Knot, 3&6 Strand Plait Here are some examples of well used ones. The bottom one was the first one I made in 198...
By: BARKing

Continue Reading »]]>
Wed, 20 Jan 2016 21:52:44 PST
Easy Rope Handle http://www.instructables.com/id/Easy-Rope-Handle/
Easy Rope Handle - More DIY How To Projects]]> http://cdn.instructables.com/F9K/LM04/IJN54JAT/F9KLM04IJN54JAT.SQUARE2.jpg http://cdn.instructables.com/F9K/LM04/IJN54JAT/F9KLM04IJN54JAT.SQUARE.jpg http://cdn.instructables.com/F9K/LM04/IJN54JAT/F9KLM04IJN54JAT.SMALL.jpg Sergey Kupelsky Easy and quick way to make a handleYou need:1. rope2. nut 2 pcs Pull up the rope Pull up the rope with free ends.Make a knot Stick in push into the nuts both endsmake a knot Use Use to move any oversized stuff
By: Sergey Kupelsky

Continue Reading »]]>
Wed, 20 Jan 2016 11:09:55 PST
Katana Umbrella http://www.instructables.com/id/Katana-Umbrella/
Katana Umbrella - More DIY How To Projects]]> http://cdn.instructables.com/FTO/CGY5/IJLZXT5Z/FTOCGY5IJLZXT5Z.SQUARE2.jpg http://cdn.instructables.com/FTO/CGY5/IJLZXT5Z/FTOCGY5IJLZXT5Z.SQUARE.jpg http://cdn.instructables.com/FTO/CGY5/IJLZXT5Z/FTOCGY5IJLZXT5Z.SMALL.jpg MehtlliK This is a DIY of the Rain Cutter: The Umbrella Samurai Sword I have made this using an old black umbrella. and how can you enjoy the rain if you're inside your house?...go out and have fun outside and you'll look awesome too!. now you can make one too with your umbrella with these steps... You Nee...
By: MehtlliK

Continue Reading »]]>
Wed, 20 Jan 2016 07:47:01 PST
Dancing on fire http://www.instructables.com/id/Dancing-on-Fire/
Dancing on fire - More DIY How To Projects]]> http://cdn.instructables.com/F0N/WVZV/IJLRU4LK/F0NWVZVIJLRU4LK.SQUARE2.jpg http://cdn.instructables.com/F0N/WVZV/IJLRU4LK/F0NWVZVIJLRU4LK.SQUARE.jpg http://cdn.instructables.com/F0N/WVZV/IJLRU4LK/F0NWVZVIJLRU4LK.SMALL.jpg Lauren De Raedt Hi! We are Stan, Lauren and Obed and we are students at Howest, Kortrijk. We are in our second year of the study Industrial Product Design. For our course Design&Prototyping we had a group work, in association with Bolwerk. This is a company which makes entertainment installations for events. We had...
By: Lauren De Raedt

Continue Reading »]]>
Tue, 19 Jan 2016 12:25:13 PST
Airbed box table http://www.instructables.com/id/Airbed-Box-Table/
Airbed box table - More DIY How To Projects]]> http://cdn.instructables.com/FYN/KGMD/IJM00E2D/FYNKGMDIJM00E2D.SQUARE2.jpg http://cdn.instructables.com/FYN/KGMD/IJM00E2D/FYNKGMDIJM00E2D.SQUARE.jpg http://cdn.instructables.com/FYN/KGMD/IJM00E2D/FYNKGMDIJM00E2D.SMALL.jpg PhilippeCox For my education industrial product design, I had to design somting started from a cartboard box. But this feature had to deal with what the first box packaged.So after a long brainstorm I decided to make a table from an airbed box.In this instructable I'll show you what you need and how you can mak...
By: PhilippeCox

Continue Reading »]]>
Tue, 19 Jan 2016 15:18:49 PST
Drift Trike Wheels http://www.instructables.com/id/Drift-Trike-Wheels/
Drift Trike Wheels - More DIY How To Projects]]> http://cdn.instructables.com/FE2/PHG2/IJ0EFKI2/FE2PHG2IJ0EFKI2.SQUARE2.jpg http://cdn.instructables.com/FE2/PHG2/IJ0EFKI2/FE2PHG2IJ0EFKI2.SQUARE.jpg http://cdn.instructables.com/FE2/PHG2/IJ0EFKI2/FE2PHG2IJ0EFKI2.SMALL.jpg Marsh Drift trikes are a lot of fun, but wheels for them can be hard to come by and pretty expensive. Here, I'll show you how to make a pair of wheels from scrap materials you can find. Tools and Materials Tools Tablesaw Circle cutting jig for tablesaw Drill press Forstner bitsMaterials Heavy gauge PVC...
By: Marsh

Continue Reading »]]>
Mon, 4 Jan 2016 14:56:14 PST
fire lantern http://www.instructables.com/id/Fire-Lantern/
fire lantern - More DIY How To Projects]]> http://cdn.instructables.com/F1N/AXIP/IJKAEVFC/F1NAXIPIJKAEVFC.SQUARE2.jpg http://cdn.instructables.com/F1N/AXIP/IJKAEVFC/F1NAXIPIJKAEVFC.SQUARE.jpg http://cdn.instructables.com/F1N/AXIP/IJKAEVFC/F1NAXIPIJKAEVFC.SMALL.jpg flavie_v we are Simon, Kristof and flaviefor school we made a construction with fire.the final concept is a lantern that sprays fire. Cut basic parts cut all the pieces from a 12mm MDF panel.cut with bandsaw or circular saw (where you are the most familiar with)(see dimensions on technical drawing) Glu...
By: flavie_v

Continue Reading »]]>
Tue, 19 Jan 2016 05:58:55 PST
Fun Water Installation http://www.instructables.com/id/Fun-Water-Installation/
Fun Water Installation - More DIY How To Projects]]> http://cdn.instructables.com/FEU/902N/IJKEQ61S/FEU902NIJKEQ61S.SQUARE2.jpg http://cdn.instructables.com/FEU/902N/IJKEQ61S/FEU902NIJKEQ61S.SQUARE.jpg http://cdn.instructables.com/FEU/902N/IJKEQ61S/FEU902NIJKEQ61S.SMALL.jpg joke.decat.1 How to make a fun water installation which can be easily set up during summer festivals like Camping Oasis. What do we need? The required materials:- An old lawn mower (it doesn't have to work)- A pressure vessel - A coupling with crane- A garden hose- A garden hose gun- A wooden block- 2 wheels ...
By: joke.decat.1

Continue Reading »]]>
Tue, 19 Jan 2016 07:54:48 PST
Jon Boat Trailer from a Harbor Freight 40 x 48 trailer http://www.instructables.com/id/Jon-Boat-Trailer-From-a-40-X-48-Trailer/
Jon Boat Trailer from a Harbor Freight 40 x 48 trailer - More DIY How To Projects]]> http://cdn.instructables.com/FMT/9H42/IJKCGYG9/FMT9H42IJKCGYG9.SQUARE2.jpg http://cdn.instructables.com/FMT/9H42/IJKCGYG9/FMT9H42IJKCGYG9.SQUARE.jpg http://cdn.instructables.com/FMT/9H42/IJKCGYG9/FMT9H42IJKCGYG9.SMALL.jpg adamavis Well, I actually don't own a Jon boat. I own a Pelican Predator 103. It's similar to a Jon boat http://www.pelicansport.com/en/products/fishing-bo...Anyways, I needed a way to transport it to the water and back and boat trailers were way too expensive. I also can't find anything decent used for unde...
By: adamavis

Continue Reading »]]>
Tue, 19 Jan 2016 07:54:19 PST
Homemade Pier/Bridge Landing Net (Fishing) http://www.instructables.com/id/Homemade-PierBridge-Landing-Net-Fishing/
Homemade Pier/Bridge Landing Net (Fishing) - More DIY How To Projects]]> http://cdn.instructables.com/FYL/C3FX/IJKA9X7K/FYLC3FXIJKA9X7K.SQUARE2.jpg http://cdn.instructables.com/FYL/C3FX/IJKA9X7K/FYLC3FXIJKA9X7K.SQUARE.jpg http://cdn.instructables.com/FYL/C3FX/IJKA9X7K/FYLC3FXIJKA9X7K.SMALL.jpg marple200 After struggling to net catfish off of the side of fishing piers and bulkheads at low tide with a pole net, I decided to take a stab at a pier net. I also wanted something that was lightweight and portable, as I often go fishing with just a rod and everything else in a backpack.It also needed to be ...
By: marple200

Continue Reading »]]>
Mon, 18 Jan 2016 14:23:24 PST