Instructables: exploring - stepbystep - cars - vehicle http://www.instructables.com Wed, 16 Apr 2014 04:50:06 PDT BLOX v1.01 How to make a sturdy adjustable Headrest Monitor Mount http://www.instructables.com/id/How-to-make-a-sturdy-adjustable-Headrest-Monitor-M/
How to make a sturdy adjustable Headrest Monitor Mount - More DIY How To Projects]]> http://cdn.instructables.com/FD4/1IM7/HLSGR8O4/FD41IM7HLSGR8O4.SQUARE2.jpg http://cdn.instructables.com/FD4/1IM7/HLSGR8O4/FD41IM7HLSGR8O4.SQUARE.jpg http://cdn.instructables.com/FD4/1IM7/HLSGR8O4/FD41IM7HLSGR8O4.SMALL.jpg jweatherson Hi All, The following does cost some money, but the demands for the application I created this for required stepping outside of what was laying around for free.  However, you can make one for about $70. The requirements I had to meet were: Support a 24in monitor and be adjustable left/right up/dow...
By: jweatherson

Continue Reading »]]>
Thu, 19 Sep 2013 15:31:39 PDT
Modified Vehicle Emblem http://www.instructables.com/id/Modified-Grill-Emblem/
Modified Vehicle Emblem - More DIY How To Projects]]> http://cdn.instructables.com/FKP/J8Z5/HI3TRXS6/FKPJ8Z5HI3TRXS6.SQUARE2.jpg http://cdn.instructables.com/FKP/J8Z5/HI3TRXS6/FKPJ8Z5HI3TRXS6.SQUARE.jpg http://cdn.instructables.com/FKP/J8Z5/HI3TRXS6/FKPJ8Z5HI3TRXS6.SMALL.jpg DualPhase Turn to the dark side and convert your transportation to an imperial weapon. Tools Required: Sandpaper Spray Paint Clear Coat Spray Paint Vinyl Sticker This instructable will work with any car emblem and can be customized to any sticker, decal or paint color. Preperation R...
By: DualPhase

Continue Reading »]]>
Fri, 21 Jun 2013 17:48:51 PDT
Fix Psychotic Grand Am Signal Clicking http://www.instructables.com/id/Fix-Psychotic-Grand-Am-Signal-Clicking/
Fix Psychotic Grand Am Signal Clicking - More DIY How To Projects]]> http://cdn.instructables.com/F9K/AJ6V/HI3U0RGC/F9KAJ6VHI3U0RGC.SQUARE2.jpg http://cdn.instructables.com/F9K/AJ6V/HI3U0RGC/F9KAJ6VHI3U0RGC.SQUARE.jpg http://cdn.instructables.com/F9K/AJ6V/HI3U0RGC/F9KAJ6VHI3U0RGC.SMALL.jpg Squash I have a 2001 Pontiac Grand Am.  About 5 years ago while driving down the road, the clicking noise, associated with the signal light and hazards, went psychotic.  I panicked because I thought the lights were also activated.  Nope, just the awful noise and about 2x faster than normal.  My nerves didn...
By: Squash

Continue Reading »]]>
Wed, 19 Jun 2013 23:11:06 PDT
How to changue oil in brake and steering wheel. http://www.instructables.com/id/How-to-changue-oil-in-brake-and-steering-wheel/
How to changue oil in brake and steering wheel. - More DIY How To Projects]]> http://cdn.instructables.com/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SQUARE2.jpg http://cdn.instructables.com/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SQUARE.jpg http://cdn.instructables.com/FNR/OOHP/HH2L56NH/FNROOHPHH2L56NH.SMALL.jpg AlexLPD All oils in this systems got a life time period, so for prevent malfunctioning, the better is to changue it. For avoid doing a hugue mess on this, keep the things very simple and do not dissasembly many parts I show you how to make a Vaccum oil recovery unit. You will Need:   A vaccum pump     ...
By: AlexLPD

Continue Reading »]]>
Fri, 24 May 2013 16:14:11 PDT
A Vehicle Backing Alarm With a Self-Reseting Disable Button http://www.instructables.com/id/A-Temporary-Disable-Button-for-Vehicle-Backing-Ala/
A Vehicle Backing Alarm With a Self-Reseting Disable Button - More DIY How To Projects]]> http://cdn.instructables.com/FNP/IL2J/HET1EPKL/FNPIL2JHET1EPKL.SQUARE2.jpg http://cdn.instructables.com/FNP/IL2J/HET1EPKL/FNPIL2JHET1EPKL.SQUARE.jpg http://cdn.instructables.com/FNP/IL2J/HET1EPKL/FNPIL2JHET1EPKL.SMALL.jpg LynxSys At one point I was in charge of maintaining the safety of a fleet of large, unwieldy vehicles. I thought that putting backing alarms on the trucks would increase everyone's safety during maneuvering in the parking lot, but I hated that darn beeping! I considered having a simple switch to turn the a...
By: LynxSys

Continue Reading »]]>
Thu, 28 Mar 2013 02:57:44 PDT
How to Perform a Vehicle Maintenance Service http://www.instructables.com/id/How-to-Perform-a-Vehicle-Maintenance-Service/
How to Perform a Vehicle Maintenance Service - More DIY How To Projects]]> http://cdn.instructables.com/F3O/271O/HD2RXS83/F3O271OHD2RXS83.SQUARE2.jpg http://cdn.instructables.com/F3O/271O/HD2RXS83/F3O271OHD2RXS83.SQUARE.jpg http://cdn.instructables.com/F3O/271O/HD2RXS83/F3O271OHD2RXS83.SMALL.jpg djteig Many people automatically think anything that deals with their vehicle maintenance needs to be dealt with by a professional. These instructions will prove otherwise. Approximately every 3,000 to 5,000 miles a vehicle should be serviced. To some people this just means changing the oil, but what a veh...
By: djteig

Continue Reading »]]>
Wed, 13 Feb 2013 20:12:50 PST
Never Lose Your Gas Cap (Again) http://www.instructables.com/id/Never-Lose-Your-Gas-Cap-Again/
Never Lose Your Gas Cap (Again) - More DIY How To Projects]]> http://cdn.instructables.com/FIF/A57M/H91LKPOP/FIFA57MH91LKPOP.SQUARE2.jpg http://cdn.instructables.com/FIF/A57M/H91LKPOP/FIFA57MH91LKPOP.SQUARE.jpg http://cdn.instructables.com/FIF/A57M/H91LKPOP/FIFA57MH91LKPOP.SMALL.jpg Livingstrong Have you ever left the filling station and realized you left your gas cap on the top of your vehicle or the top of the pump at the filling station? Its not hard to do if you are in a hurry or there is foul weather. Its harder to do if your gas cap is attached to your vehicle but sometimes the plasti...
By: Livingstrong

Continue Reading »]]>
Fri, 2 Nov 2012 17:37:58 PDT
What products to use and how to wax a vehicle http://www.instructables.com/id/What-products-to-use-and-how-to-wax-a-vehicle/
What products to use and how to wax a vehicle - More DIY How To Projects]]> http://cdn.instructables.com/F59/CJX2/H8FYP6G4/F59CJX2H8FYP6G4.SQUARE2.jpg http://cdn.instructables.com/F59/CJX2/H8FYP6G4/F59CJX2H8FYP6G4.SQUARE.jpg http://cdn.instructables.com/F59/CJX2/H8FYP6G4/F59CJX2H8FYP6G4.SMALL.jpg nikolast Quickly remove any doubts you have about waxing your vehicle. Follow these simple steps and see your car shine like never before! Background: I have waxed and detailed cars professionally at dealerships and in my spare time for other individuals. Also, I have waxed large boats for boat dealerships....
By: nikolast

Continue Reading »]]>
Mon, 29 Oct 2012 13:53:28 PDT
Replace the Sideview Mirror on a 2010 Hyundai Santa Fe http://www.instructables.com/id/Replace-the-Sideview-Mirror-on-a-2010-Hyundai-Sant/
Replace the Sideview Mirror on a 2010 Hyundai Santa Fe - More DIY How To Projects]]> http://cdn.instructables.com/FUV/VBM8/H63P4445/FUVVBM8H63P4445.SQUARE2.jpg http://cdn.instructables.com/FUV/VBM8/H63P4445/FUVVBM8H63P4445.SQUARE.jpg http://cdn.instructables.com/FUV/VBM8/H63P4445/FUVVBM8H63P4445.SMALL.jpg ProfMuggs Parking in Manhattan is hazardous for your car. Unfortunately, the parking garages aren't much safer. We came to get our Santa Fe and mysteriously the mirror was broken, but the valet didn't know anything about it. Parking was free that night, but I didn't have much luck getting money for a replacem...
By: ProfMuggs

Continue Reading »]]>
Wed, 22 Aug 2012 21:13:29 PDT
Changing A Vehicle's Oil http://www.instructables.com/id/Changing-A-Vehicles-Oil/
Changing A Vehicle's Oil - More DIY How To Projects]]> http://cdn.instructables.com/F6P/PB1C/H2WEXE89/F6PPB1CH2WEXE89.SQUARE2.jpg http://cdn.instructables.com/F6P/PB1C/H2WEXE89/F6PPB1CH2WEXE89.SQUARE.jpg http://cdn.instructables.com/F6P/PB1C/H2WEXE89/F6PPB1CH2WEXE89.SMALL.jpg name2please Changing your motor oil is any easy way to save money and keep your vehicle in good condition. It is a simple process that does not require vast automobile knowledge by any means. Most auto-mechanics will tell you your oil should be changed every 3,000 miles or every 3 months, but most cars can last...
By: name2please

Continue Reading »]]>
Mon, 11 Jun 2012 18:29:41 PDT
Lexus RX300 Aux In http://www.instructables.com/id/Lexus-RX300-Aux-In/
Lexus RX300 Aux In - More DIY How To Projects]]> http://cdn.instructables.com/F3Z/YEPF/GUMFTLLO/F3ZYEPFGUMFTLLO.SQUARE2.jpg http://cdn.instructables.com/F3Z/YEPF/GUMFTLLO/F3ZYEPFGUMFTLLO.SQUARE.jpg http://cdn.instructables.com/F3Z/YEPF/GUMFTLLO/F3ZYEPFGUMFTLLO.SMALL.jpg scottrevoman333 This Instructable will show you how to add an AUX In for your 1999 Lexus RX300. I'm not sure of the compatibility to other models or years but for the RX and the IS the instructions are very similar the only difference is the color of the wires. This Instructable can also get you in the right direct...
By: scottrevoman333

Continue Reading »]]>
Sat, 5 Nov 2011 14:38:50 PDT
Propane Converted ATV http://www.instructables.com/id/Propane-Converted-ATV/
Propane Converted ATV - More DIY How To Projects]]> http://cdn.instructables.com/FT3/DKPD/GJQEMGUF/FT3DKPDGJQEMGUF.SQUARE2.jpg http://cdn.instructables.com/FT3/DKPD/GJQEMGUF/FT3DKPDGJQEMGUF.SQUARE.jpg http://cdn.instructables.com/FT3/DKPD/GJQEMGUF/FT3DKPDGJQEMGUF.SMALL.jpg scottrevoman333 Hello all, this is going to be a somewhat simple instructables. So here is some background information on the build, it started when a few years back we had a Polaris 350 Trailboss, and the engine finally gave out after many years of enjoyment and after that we just let it sit unitl we finally rem...
By: scottrevoman333

Continue Reading »]]>
Mon, 21 Feb 2011 18:58:17 PST
Upgrading the exterior lights on a landrover defender to NAS. (Part 3 of 3) http://www.instructables.com/id/Upgrading-the-exterior-lights-on-a-landrover-defen-2/
Upgrading the exterior lights on a landrover defender to NAS. (Part 3 of 3) - More DIY How To Projects]]> http://cdn.instructables.com/FKR/HX60/GELSBXX5/FKRHX60GELSBXX5.SQUARE2.jpg http://cdn.instructables.com/FKR/HX60/GELSBXX5/FKRHX60GELSBXX5.SQUARE.jpg http://cdn.instructables.com/FKR/HX60/GELSBXX5/FKRHX60GELSBXX5.SMALL.jpg bunglesmate This Instructable is part 3 of 3 - Fitting the rear lamps on a defender. Original lenses at the rear. As you can see the original lenses were looking pretty tatty. They're normally quite brittle and don't take a lot to break them. Once the coloured lens has been removed I saw the screws providing...
By: bunglesmate

Continue Reading »]]>
Tue, 28 Sep 2010 03:09:10 PDT
Upgrading the exterior lights on a landrover defender to NAS. (Part 2 of 3) http://www.instructables.com/id/Upgrading-the-exterior-lights-on-a-landrover-defen-1/
Upgrading the exterior lights on a landrover defender to NAS. (Part 2 of 3) - More DIY How To Projects]]> http://cdn.instructables.com/F4B/H11H/G6LWI7ZM/F4BH11HG6LWI7ZM.SQUARE2.jpg http://cdn.instructables.com/F4B/H11H/G6LWI7ZM/F4BH11HG6LWI7ZM.SQUARE.jpg http://cdn.instructables.com/F4B/H11H/G6LWI7ZM/F4BH11HG6LWI7ZM.SMALL.jpg bunglesmate After making up the leads in part 1 of 3 it is now time to move on to the actual installation of the new lenses. Remove fascia. The first thing to do is to remove the fascia from around the headlight. This is necessary to cut holes in them for the new lenses and also to gain access to the wiring ...
By: bunglesmate

Continue Reading »]]>
Mon, 27 Sep 2010 15:24:51 PDT
Change the old Ball Joints on your truck http://www.instructables.com/id/Change-the-old-Ball-Joints-on-your-truck/
Change the old Ball Joints on your truck - More DIY How To Projects]]> http://cdn.instructables.com/FIX/U7FS/FUI0P0VU/FIXU7FSFUI0P0VU.SQUARE2.jpg http://cdn.instructables.com/FIX/U7FS/FUI0P0VU/FIXU7FSFUI0P0VU.SQUARE.jpg http://cdn.instructables.com/FIX/U7FS/FUI0P0VU/FIXU7FSFUI0P0VU.SMALL.jpg Pkranger88 This is an instructable for changing out the ball joints on a 2002 Chevrolet S-10 Extreme. The principles presented are very similar to many other vehicles. Ever started to work on a vehicle but didn't know how to do the specific task? Couldn't find the information needed to complete your work? ...
By: Pkranger88

Continue Reading »]]>
Wed, 13 May 2009 10:48:03 PDT
Vehicle efficiency upgrades: 30+ MPG in 2.5ton commercial truck http://www.instructables.com/id/Vehicle-efficiency-upgrades/
Vehicle efficiency upgrades: 30+ MPG in 2.5ton commercial truck - More DIY How To Projects]]> http://cdn.instructables.com/FG5/LPE6/FU0HZ3FI/FG5LPE6FU0HZ3FI.SQUARE2.jpg http://cdn.instructables.com/FG5/LPE6/FU0HZ3FI/FG5LPE6FU0HZ3FI.SQUARE.jpg http://cdn.instructables.com/FG5/LPE6/FU0HZ3FI/FG5LPE6FU0HZ3FI.SMALL.jpg JacobAziza [note:  new video has been added on step 1!] [note 2: Most of what I write isn't relevant to Instructables.  My main blog is here: biodieselhauling.blogspot.com] [note 3: Also save energy at home.  See my energy guide: instructables.com/id/Not-your-average-save-energy-advice-use-less-en/ ] Go 50-10...
By: JacobAziza

Continue Reading »]]>
Wed, 8 Apr 2009 10:52:46 PDT
How to replace a power steering pump http://www.instructables.com/id/How-to-replace-a-power-steering-pump/
How to replace a power steering pump - More DIY How To Projects]]> http://cdn.instructables.com/F37/9PJJ/FR0ZSS7O/F379PJJFR0ZSS7O.SQUARE2.jpg http://cdn.instructables.com/F37/9PJJ/FR0ZSS7O/F379PJJFR0ZSS7O.SQUARE.jpg http://cdn.instructables.com/F37/9PJJ/FR0ZSS7O/F379PJJFR0ZSS7O.SMALL.jpg marksatterfield So you wake up one morning ready to drive the kids to school and head in to work. The sun is up, and the dogs are barking. As you are walking up to the car, your son says, "Daddy! Look at all that water under the car!" -- and it isn't water. It is power steering fluid.Another symptom is a "grow...
By: marksatterfield

Continue Reading »]]>
Fri, 13 Feb 2009 07:49:48 PST
On-Board Air Compressor / Welder for vehicles http://www.instructables.com/id/On-Board-Air-Compressor-Welder-for-vehicles/
On-Board Air Compressor / Welder for vehicles - More DIY How To Projects]]> http://cdn.instructables.com/FFM/MNNT/FPIUQU1Z/FFMMNNTFPIUQU1Z.SQUARE2.jpg http://cdn.instructables.com/FFM/MNNT/FPIUQU1Z/FFMMNNTFPIUQU1Z.SQUARE.jpg http://cdn.instructables.com/FFM/MNNT/FPIUQU1Z/FFMMNNTFPIUQU1Z.SMALL.jpg DeathBlade When we go to help on a project we usually only take out battery powered or hand tool. We have to leave our pneumatic tools at home, with a on-board air compressor we dont need to leave our pneumatic tools in the shop anymore. To start off - Why do I need a air compressor? Why do you need a air c...
By: DeathBlade

Continue Reading »]]>
Sun, 4 Jan 2009 20:01:17 PST
How-To: Replace An Alternator http://www.instructables.com/id/How-To-Replace-An-Alternator/
How-To: Replace An Alternator - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F3F/DQUC/FOVXOSC0/F3FDQUCFOVXOSC0.SQUARE2.jpg http://www.instructables.com/files/deriv/F3F/DQUC/FOVXOSC0/F3FDQUCFOVXOSC0.SQUARE.jpg http://www.instructables.com/files/deriv/F3F/DQUC/FOVXOSC0/F3FDQUCFOVXOSC0.SMALL.jpg Toolmonger Strapped for cash this holiday season? Replacing an alternator can cost you several hundred bucks at the local repair shop, but it's one of the simplest repairs you can do at home. With a few tools and about an hour you can swap it out yourself -- and keep your dough in your pocket where it belongs....
By: Toolmonger

Continue Reading »]]>
Mon, 22 Dec 2008 17:36:10 PST
Changing and rotating tires http://www.instructables.com/id/Changing-and-rotating-tires/
Changing and rotating tires - More DIY How To Projects]]> http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SQUARE2.jpg http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SQUARE.jpg http://cdn.instructables.com/FDT/612E/FN4A5DTN/FDT612EFN4A5DTN.SMALL.jpg FKR First you need to have your car in postion on the lift with all doors and objects in the car or put away. Tools needed For this you will need these said tools: - Air gun - Torque wrench - Air hose - Impact Sockets Car lifting After you get the rigth set off tools you would want to find the...
By: FKR

Continue Reading »]]>
Wed, 5 Nov 2008 05:49:26 PST
The Comprehensive Guide To Saving Money on Gas http://www.instructables.com/id/The-Comprehensive-Guide-To-Saving-Money-on-Gas/
The Comprehensive Guide To Saving Money on Gas - More DIY How To Projects]]> http://cdn.instructables.com/FVK/AJSJ/FKD1HMVQ/FVKAJSJFKD1HMVQ.SQUARE2.jpg http://cdn.instructables.com/FVK/AJSJ/FKD1HMVQ/FVKAJSJFKD1HMVQ.SQUARE.jpg http://cdn.instructables.com/FVK/AJSJ/FKD1HMVQ/FVKAJSJFKD1HMVQ.SMALL.jpg RickO5 Tired of paying out the nose for gasoline? We all are, and while most of us can't give up our cars entirely, and there are things we can do to ease the pain. The popular option to consider is getting new transportation entirely. Both diesel cars and hybrids can get over 50 miles per gallon, which c...
By: RickO5

Continue Reading »]]>
Tue, 26 Aug 2008 20:25:03 PDT
How to get sap or resin off of a car http://www.instructables.com/id/How-to-get-sap-or-resin-off-of-a-car/
How to get sap or resin off of a car - More DIY How To Projects]]> http://cdn.instructables.com/FGF/53YK/FJPYEQ6D/FGF53YKFJPYEQ6D.SQUARE2.jpg http://cdn.instructables.com/FGF/53YK/FJPYEQ6D/FGF53YKFJPYEQ6D.SQUARE.jpg http://cdn.instructables.com/FGF/53YK/FJPYEQ6D/FGF53YKFJPYEQ6D.SMALL.jpg hyrulianshinobi333 Few things are more irritating than getting pitch on your vehicles new paint job. Soap and water won't work by themselves here. You'll need something much more powerful if you want to spend less than 3 hours then ending up with an incomplete job. What you will need WD-40 1 wet and 1 dry o...
By: hyrulianshinobi333

Continue Reading »]]>
Mon, 11 Aug 2008 11:10:16 PDT
How to prevent rust on your car http://www.instructables.com/id/How-to-prevent-rust-on-your-car/
How to prevent rust on your car - More DIY How To Projects]]> http://cdn.instructables.com/FRQ/ILGQ/FG704VZ4/FRQILGQFG704VZ4.SQUARE2.jpg http://cdn.instructables.com/FRQ/ILGQ/FG704VZ4/FRQILGQFG704VZ4.SQUARE.jpg http://cdn.instructables.com/FRQ/ILGQ/FG704VZ4/FRQILGQFG704VZ4.SMALL.jpg fanscape Keeping your car rust-free prevents serious damage and maintains the look and value of your car. If you choose to try us, Jig-a-loo, as part of your car maintenance routine, you can find out where to pick up a can here: http://www.jigaloo.com/us/e_store_locator.php. Here are 6 detailed steps and a ...
By: fanscape

Continue Reading »]]>
Wed, 14 May 2008 09:16:57 PDT
Lose the vibration/noise http://www.instructables.com/id/Lose-the-vibrationnoise/
Lose the vibration/noise - More DIY How To Projects]]> http://cdn.instructables.com/FGM/R790/F5GE25AX/FGMR790F5GE25AX.SQUARE2.jpg http://cdn.instructables.com/FGM/R790/F5GE25AX/FGMR790F5GE25AX.SQUARE.jpg http://cdn.instructables.com/FGM/R790/F5GE25AX/FGMR790F5GE25AX.SMALL.jpg Tweakerz Well this is my first time and it is a simple project. I simply wanted to take the license plate away from the car and lessen the sounds caused by vibration, the black car (Monte Carlo SS) has aftermarket stereo setup which causes a rattle I dislike. What do we need? I decided I wanted a hard pla...
By: Tweakerz

Continue Reading »]]>
Thu, 16 Aug 2007 20:25:44 PDT
How to make your truck/vehicle sound beastly! for $30 (exhaust/muffler) http://www.instructables.com/id/How-to-make-your-truckvehicle-sound-beastly-for-/
How to make your truck/vehicle sound beastly! for $30 (exhaust/muffler) - More DIY How To Projects]]> http://cdn.instructables.com/FVD/8M37/P99ET9K5JEC/FVD8M37P99ET9K5JEC.SQUARE2.jpg http://cdn.instructables.com/FVD/8M37/P99ET9K5JEC/FVD8M37P99ET9K5JEC.SQUARE.jpg http://cdn.instructables.com/FVD/8M37/P99ET9K5JEC/FVD8M37P99ET9K5JEC.SMALL.jpg Jesus10555 This instructable will explain in depth how to rework your exhaust system to make it purr/roar/growl (which ever description you like)NOTE ABOUT THE VIDEO, AND I WANT TO PUT THIS NOTE RIGHT HERE TO MAKE SURE EVERYONE SEES THIS NOTE..... THE FIRST PART OF THE RECORDING, THE CAMERA WAS REALLY CLOSE TO...
By: Jesus10555

Continue Reading »]]>
Wed, 18 Oct 2006 21:44:19 PDT
enhanced lighting for your vehicle http://www.instructables.com/id/enhanced-lighting-for-your-vehicle/
enhanced lighting for your vehicle - More DIY How To Projects]]> http://cdn.instructables.com/FZB/YA0G/EM1EP27VD2S/FZBYA0GEM1EP27VD2S.SQUARE2.jpg http://cdn.instructables.com/FZB/YA0G/EM1EP27VD2S/FZBYA0GEM1EP27VD2S.SQUARE.jpg http://cdn.instructables.com/FZB/YA0G/EM1EP27VD2S/FZBYA0GEM1EP27VD2S.SMALL.jpg belarson I used a Cold Cathode light kit for a computer to add more lighting to my jetta wagon Purchase a Cold Cathode lighting kit for a computer the kit i bought had a little switch screwed into a PCI port plate to turn of and on the light. I removed my cargo light from the top of my cargo area in the ...
By: belarson

Continue Reading »]]>
Wed, 22 Mar 2006 14:33:17 PST