Instructables: exploring - stepbystep - clocks http://www.instructables.com Tue, 30 Sep 2014 16:16:57 PDT BLOX v1.01 The Electro-Mechanical Clock http://www.instructables.com/id/The-Electro-Mechanical-Clock/
The Electro-Mechanical Clock - More DIY How To Projects]]> http://cdn.instructables.com/F4U/VUUQ/I0C971PP/F4UVUUQI0C971PP.SQUARE2.jpg http://cdn.instructables.com/F4U/VUUQ/I0C971PP/F4UVUUQI0C971PP.SQUARE.jpg http://cdn.instructables.com/F4U/VUUQ/I0C971PP/F4UVUUQI0C971PP.SMALL.jpg hp07 Electronics & Mechanical are the two engineering disciplines that I love the most. So I wanted to create a showpiece that portrays the awesomeness of these disciplines. Also I believe that time is the most important asset anybody can have.So I wanted make something that portrays the importance of ti...
By: hp07

Continue Reading »]]>
Mon, 22 Sep 2014 20:43:49 PDT
Javelin's Word Clock http://www.instructables.com/id/Javelins-Word-Clock/
Javelin's Word Clock - More DIY How To Projects]]> http://cdn.instructables.com/FAN/EXWZ/HZTO8S8J/FANEXWZHZTO8S8J.SQUARE2.jpg http://cdn.instructables.com/FAN/EXWZ/HZTO8S8J/FANEXWZHZTO8S8J.SQUARE.jpg http://cdn.instructables.com/FAN/EXWZ/HZTO8S8J/FANEXWZHZTO8S8J.SMALL.jpg nitrohawk My place of employment, Javelin, is always looking for ways to make our products and services personable. Recently, an opportunity presented itself where I was asked to construct a word clock for a client. I found a number of great guides such as the Sleek Word Clock by scottbez1, Wordclock Grew Up ...
By: nitrohawk

Continue Reading »]]>
Thu, 4 Sep 2014 12:37:06 PDT
A 'Green' Clock http://www.instructables.com/id/A-Green-Clock/
A 'Green' Clock - More DIY How To Projects]]> http://cdn.instructables.com/F20/YUNX/HZNYISV5/F20YUNXHZNYISV5.SQUARE2.jpg http://cdn.instructables.com/F20/YUNX/HZNYISV5/F20YUNXHZNYISV5.SQUARE.jpg http://cdn.instructables.com/F20/YUNX/HZNYISV5/F20YUNXHZNYISV5.SMALL.jpg Siddharth Jain Well, now you'd never have throw away those used up cells, for this clock can run purely on the energy from 'used up' cells!I had always wondered what to do with those used up cells I have been collecting, and after I came across this, I knew what to do with them. The only thing I needed to figure o...
By: Siddharth Jain

Continue Reading »]]>
Thu, 4 Sep 2014 11:05:21 PDT
Wordclock http://www.instructables.com/id/Wordclock/
Wordclock - More DIY How To Projects]]> http://cdn.instructables.com/FW1/KEC9/HZJOBQBU/FW1KEC9HZJOBQBU.SQUARE2.jpg http://cdn.instructables.com/FW1/KEC9/HZJOBQBU/FW1KEC9HZJOBQBU.SQUARE.jpg http://cdn.instructables.com/FW1/KEC9/HZJOBQBU/FW1KEC9HZJOBQBU.SMALL.jpg wouterdevinck Ever since first seeing QLOCKTWO by Biegert & Funk a couple of years ago, I have wanted a word clock on my living room wall. The original, however, somewhat exceeds my yearly clock budget, so I started looking for alternatives.The internet is riddled with DIY and commercial versions of this type of ...
By: wouterdevinck

Continue Reading »]]>
Mon, 1 Sep 2014 17:32:05 PDT
Awesome Wall Clock http://www.instructables.com/id/Awesome-Wall-Clock/
Awesome Wall Clock - More DIY How To Projects]]> http://cdn.instructables.com/FEN/DP7N/HZEWQO89/FENDP7NHZEWQO89.SQUARE2.jpg http://cdn.instructables.com/FEN/DP7N/HZEWQO89/FENDP7NHZEWQO89.SQUARE.jpg http://cdn.instructables.com/FEN/DP7N/HZEWQO89/FENDP7NHZEWQO89.SMALL.jpg diyboy1 This clock can be made in 5 minutes and looks absolutely awesome! The Only Step All you will need for this project is a wrist watch, a hard-disk platter, a hobby knife, and some pliers.Start by disassembling the watch. Break of the little knob on the side of the watch used for setting the time. T...
By: diyboy1

Continue Reading »]]>
Fri, 29 Aug 2014 01:34:34 PDT
How to shorten a Rolex strap http://www.instructables.com/id/How-to-shorten-a-Rolex-strap/
How to shorten a Rolex strap - More DIY How To Projects]]> http://cdn.instructables.com/FP2/GRUY/HYTI2Y4Y/FP2GRUYHYTI2Y4Y.SQUARE2.jpg http://cdn.instructables.com/FP2/GRUY/HYTI2Y4Y/FP2GRUYHYTI2Y4Y.SQUARE.jpg http://cdn.instructables.com/FP2/GRUY/HYTI2Y4Y/FP2GRUYHYTI2Y4Y.SMALL.jpg Unboxingexperience7 You don't need to go to a shop and pay a lot of money for shortening a Rolex watch strap. You just need is a small screw driver. Remove links open gently the screws (2) of the link(s) you want to removeremove the link(s) Shorten the strap 3. connect the shortened strap and insert the screw4. t...
By: Unboxingexperience7

Continue Reading »]]>
Thu, 14 Aug 2014 10:10:24 PDT
Easy-to-Build: Modern Glowing Lego Clock http://www.instructables.com/id/Easy-to-Build-Modern-Glowing-Lego-Clock/
Easy-to-Build: Modern Glowing Lego Clock - More DIY How To Projects]]> http://cdn.instructables.com/FDN/GUZ2/HYPNZFHG/FDNGUZ2HYPNZFHG.SQUARE2.jpg http://cdn.instructables.com/FDN/GUZ2/HYPNZFHG/FDNGUZ2HYPNZFHG.SQUARE.jpg http://cdn.instructables.com/FDN/GUZ2/HYPNZFHG/FDNGUZ2HYPNZFHG.SMALL.jpg MichelleW1 LEGOs don't always have to be used for building. Combining refurbished Legos, colored lighting, and a glossy clock face will create a clock with great modernity, and a great addition to your home or child's playroom. This kid-friendly clock was planned and built by a 12-year old, with minimal adul...
By: MichelleW1

Continue Reading »]]>
Mon, 11 Aug 2014 13:58:03 PDT
Pure Siesta Mi UPS (Uninterruptible Power Supply) http://www.instructables.com/id/Pure-Siesta-Mi-UPS-Uninterruptible-Power-Supply/
Pure Siesta Mi UPS (Uninterruptible Power Supply) - More DIY How To Projects]]> http://cdn.instructables.com/F6O/629W/HYSITJQL/F6O629WHYSITJQL.SQUARE2.jpg http://cdn.instructables.com/F6O/629W/HYSITJQL/F6O629WHYSITJQL.SQUARE.jpg http://cdn.instructables.com/F6O/629W/HYSITJQL/F6O629WHYSITJQL.SMALL.jpg PhantomFreak As these alarm clocks use Mini USB for their power supply, you can construct a very simple UPS using parts available on the likes of eBay. This is possible on both the Series 1 (pure in top left corner & Siesta Mi in top right corner of front) & Series 2 (pure written below screen) version.Parts you...
By: PhantomFreak

Continue Reading »]]>
Mon, 11 Aug 2014 12:16:41 PDT
what's in a quartz clock http://www.instructables.com/id/whats-in-a-quartz-clock/
what's in a quartz clock - More DIY How To Projects]]> http://cdn.instructables.com/FL7/UC7N/HY3Z9Q4H/FL7UC7NHY3Z9Q4H.SQUARE2.jpg http://cdn.instructables.com/FL7/UC7N/HY3Z9Q4H/FL7UC7NHY3Z9Q4H.SQUARE.jpg http://cdn.instructables.com/FL7/UC7N/HY3Z9Q4H/FL7UC7NHY3Z9Q4H.SMALL.jpg Stan1y having come across instructables on equatorial mounts I wondered why no one used a quartz movement as the power source I quickly realised it is because they produce very low torque. I wondered if there was anything thing that you could do to improve it so as a starting point I took one apart to see....
By: Stan1y

Continue Reading »]]>
Sun, 27 Jul 2014 15:58:20 PDT
Shop-style wall clock http://www.instructables.com/id/Shop-style-wall-clock/
Shop-style wall clock - More DIY How To Projects]]> http://cdn.instructables.com/FMO/F6KL/HXQF2QAI/FMOF6KLHXQF2QAI.SQUARE2.jpg http://cdn.instructables.com/FMO/F6KL/HXQF2QAI/FMOF6KLHXQF2QAI.SQUARE.jpg http://cdn.instructables.com/FMO/F6KL/HXQF2QAI/FMOF6KLHXQF2QAI.SMALL.jpg ade angelis A one-step i'ble just to show the creation of the day: a wall clock made of free/recycled materials! Previously I used to bring my wristwatch with me when I went working in my shop, to keep track of time. Soon I noticed that it's nearly impossible to keep it from getting all covered in sawdust. Furt...
By: ade angelis

Continue Reading »]]>
Wed, 16 Jul 2014 15:03:19 PDT
chipKIT Alarm Clock http://www.instructables.com/id/chipKIT-Alarm-Clock/
chipKIT Alarm Clock - More DIY How To Projects]]> http://cdn.instructables.com/F0Z/GHJW/HXG6MSFX/F0ZGHJWHXG6MSFX.SQUARE2.jpg http://cdn.instructables.com/F0Z/GHJW/HXG6MSFX/F0ZGHJWHXG6MSFX.SQUARE.jpg http://cdn.instructables.com/F0Z/GHJW/HXG6MSFX/F0ZGHJWHXG6MSFX.SMALL.jpg JColvin91 Have you ever wondered how to make your own alarm clock? Is it hard? Is it easy? I know from personal experience that making your own clock is definitely on the easy side and will show you how you can make your own today. What we need This particular alarm clock can be created with parts from ...
By: JColvin91

Continue Reading »]]>
Fri, 20 Jun 2014 14:58:34 PDT
Instructables Robot Clock http://www.instructables.com/id/Instructables-Robot-Clock/
Instructables Robot Clock - More DIY How To Projects]]> http://cdn.instructables.com/F9B/507X/HW3K4VLB/F9B507XHW3K4VLB.SQUARE2.jpg http://cdn.instructables.com/F9B/507X/HW3K4VLB/F9B507XHW3K4VLB.SQUARE.jpg http://cdn.instructables.com/F9B/507X/HW3K4VLB/F9B507XHW3K4VLB.SMALL.jpg creativity123 This is an awesome Instructables Robot Clock that is perfect for any office desk, night stand, window sill, coffee table, etc.. It is small and wireless, which makes it great for travel. To turn it on just push the robot and watch him light up and display the time. With the right tools this clock is...
By: creativity123

Continue Reading »]]>
Fri, 6 Jun 2014 07:44:43 PDT
How to turn a laptop into an alarm clock http://www.instructables.com/id/How-to-turn-a-laptop-into-an-alarm-clock/
How to turn a laptop into an alarm clock - More DIY How To Projects]]> http://cdn.instructables.com/FZ0/F7QA/HUOP4VBS/FZ0F7QAHUOP4VBS.SQUARE2.jpg http://cdn.instructables.com/FZ0/F7QA/HUOP4VBS/FZ0F7QAHUOP4VBS.SQUARE.jpg http://cdn.instructables.com/FZ0/F7QA/HUOP4VBS/FZ0F7QAHUOP4VBS.SMALL.jpg ironboy39 After I realized I had an old Dell Inspiron Mini that was really slow, I decided that since no one used it, it would be perfect to turn into an alarm clock. Get the software First, you'll need a clock screensaver. (skip this part if you don't want the clock but want the alarm)There are many ...
By: ironboy39

Continue Reading »]]>
Tue, 3 Jun 2014 09:48:53 PDT
Lunar Phase Clock http://www.instructables.com/id/Lunar-Phase-Clock/
Lunar Phase Clock - More DIY How To Projects]]> http://cdn.instructables.com/FX4/QQ3G/HVTWFAVE/FX4QQ3GHVTWFAVE.SQUARE2.jpg http://cdn.instructables.com/FX4/QQ3G/HVTWFAVE/FX4QQ3GHVTWFAVE.SQUARE.jpg http://cdn.instructables.com/FX4/QQ3G/HVTWFAVE/FX4QQ3GHVTWFAVE.SMALL.jpg Aleator777 In this Instructable we will be building a dynamic lunar lamp with the Raspberry Pi. With your very own lunar clock you'll always know the current phase of the moon, no matter the weather! History and Theory Budding astronomer? Recently bitten by a werewolf? Whatever your lunar-phase-knowing ...
By: Aleator777

Continue Reading »]]>
Fri, 30 May 2014 13:51:30 PDT
Bamboo digital clock http://www.instructables.com/id/Bamboo-digital-clock/
Bamboo digital clock - More DIY How To Projects]]> http://cdn.instructables.com/FLZ/NUVD/HV1KR9NT/FLZNUVDHV1KR9NT.SQUARE2.jpg http://cdn.instructables.com/FLZ/NUVD/HV1KR9NT/FLZNUVDHV1KR9NT.SQUARE.jpg http://cdn.instructables.com/FLZ/NUVD/HV1KR9NT/FLZNUVDHV1KR9NT.SMALL.jpg MacManus88 You need following parts for this beautiful clock:- Arudino Mini Pro- digital RGB LED-Stripe (1m, 60 LEDs)- Bamboo pizza plate (32cm circumference)- RealTimeClock Module for Arduino- 3,3v Voltage regulator (for the RTC module)Just stick the LED-Stripe around the pizza plate and connect the RTC and t...
By: MacManus88

Continue Reading »]]>
Sat, 10 May 2014 10:26:58 PDT
ChronosMEGA; a wrist watch http://www.instructables.com/id/ChronosMEGA-a-wrist-watch/
ChronosMEGA; a wrist watch - More DIY How To Projects]]> http://cdn.instructables.com/FKW/LUCI/HUJSW6WD/FKWLUCIHUJSW6WD.SQUARE2.jpg http://cdn.instructables.com/FKW/LUCI/HUJSW6WD/FKWLUCIHUJSW6WD.SQUARE.jpg http://cdn.instructables.com/FKW/LUCI/HUJSW6WD/FKWLUCIHUJSW6WD.SMALL.jpg N.fletch I've always loved watches; not only are they aesthetic and beautiful, but they are functional, precise and useful. An elegant fusion between engineering and art; two normally opposed perspectives, now joined in harmonic unison. However, all technologies like the dial-up internet, the CVT monitor a...
By: N.fletch

Continue Reading »]]>
Mon, 28 Apr 2014 17:43:35 PDT
Flower power clock or one dirty time peice http://www.instructables.com/id/Flower-power-clock-or-one-dirty-time-peice/
Flower power clock or one dirty time peice - More DIY How To Projects]]> http://cdn.instructables.com/FNB/OQKC/HUIS81OO/FNBOQKCHUIS81OO.SQUARE2.jpg http://cdn.instructables.com/FNB/OQKC/HUIS81OO/FNBOQKCHUIS81OO.SQUARE.jpg http://cdn.instructables.com/FNB/OQKC/HUIS81OO/FNBOQKCHUIS81OO.SMALL.jpg Triclaw This is my second instructable  and for this one I will be hacking into a pocket watch and replacing the need for batteries and turning it into a desk clock or wall clock with its own solar powered night light  and also  it doubles as a planter materials Bunch of junk watch hot glu...
By: Triclaw

Continue Reading »]]>
Sun, 27 Apr 2014 20:09:10 PDT
Cinema Slate http://www.instructables.com/id/Cinema-Slate/
Cinema Slate - More DIY How To Projects]]> http://cdn.instructables.com/FWB/Y9HO/HHS9QWH4/FWBY9HOHHS9QWH4.SQUARE2.jpg http://cdn.instructables.com/FWB/Y9HO/HHS9QWH4/FWBY9HOHHS9QWH4.SQUARE.jpg http://cdn.instructables.com/FWB/Y9HO/HHS9QWH4/FWBY9HOHHS9QWH4.SMALL.jpg SpaceShipOne I have always been very much interested in the behind-the-scenes aspect of film-making; all the gear that goes into a single shoot.  As a college student I even had the opportunity to show movies on 35mm film.  As a result of all this I wanted to make something that looked like it belonged on a movi...
By: SpaceShipOne

Continue Reading »]]>
Sun, 27 Apr 2014 18:33:42 PDT
Acrylic Skeleton Clock http://www.instructables.com/id/Acrylic-Skeleton-Clock/
Acrylic Skeleton Clock - More DIY How To Projects]]> http://cdn.instructables.com/F98/1TYC/HUDEP3YI/F981TYCHUDEP3YI.SQUARE2.jpg http://cdn.instructables.com/F98/1TYC/HUDEP3YI/F981TYCHUDEP3YI.SQUARE.jpg http://cdn.instructables.com/F98/1TYC/HUDEP3YI/F981TYCHUDEP3YI.SMALL.jpg benmurton This is a clock made fully out of acrylic! This was originally was my year 13 mechanical engineering college project, we had to research, design and build a project for a stakeholder, this including lots of recording so there is no shortage of photos. the use of acrylic for a main building m...
By: benmurton

Continue Reading »]]>
Wed, 23 Apr 2014 22:19:35 PDT
Big Digit Backwards counting bluetooth Clock http://www.instructables.com/id/Big-Digit-Backwards-counting-bluetooth-Clock/
Big Digit Backwards counting bluetooth Clock - More DIY How To Projects]]> http://cdn.instructables.com/FBM/V132/HUBWU15P/FBMV132HUBWU15P.SQUARE2.jpg http://cdn.instructables.com/FBM/V132/HUBWU15P/FBMV132HUBWU15P.SQUARE.jpg http://cdn.instructables.com/FBM/V132/HUBWU15P/FBMV132HUBWU15P.SMALL.jpg kenyer Why? I wanted to make my own big 7-segment digits for a long time now. I had some ideas how to do them differently. During the process I came to the conclusion that the standard 7-segment display isn't that bad :) . I did have to change something so I ended up with a 29-segment digit. I am really ha...
By: kenyer

Continue Reading »]]>
Wed, 23 Apr 2014 12:34:08 PDT
Master Clock http://www.instructables.com/id/Master-Clock/
Master Clock - More DIY How To Projects]]> http://cdn.instructables.com/FYN/TTOS/HTHKFQY7/FYNTTOSHTHKFQY7.SQUARE2.jpg http://cdn.instructables.com/FYN/TTOS/HTHKFQY7/FYNTTOSHTHKFQY7.SQUARE.jpg http://cdn.instructables.com/FYN/TTOS/HTHKFQY7/FYNTTOSHTHKFQY7.SMALL.jpg jedhodson This is a project for anyone that wants a nice big clock that's viewable from 12 meters away or up close. You can make it as big as you want. It also incorporates a built in alarm clock that can be used as an event handler, say for a automated watering system for a garden or to remind you about th...
By: jedhodson

Continue Reading »]]>
Wed, 2 Apr 2014 02:45:15 PDT
Nixie bargraph clock http://www.instructables.com/id/Nixie-bargraph-clock/
Nixie bargraph clock - More DIY How To Projects]]> http://cdn.instructables.com/FFY/DQN9/HTEFML49/FFYDQN9HTEFML49.SQUARE2.jpg http://cdn.instructables.com/FFY/DQN9/HTEFML49/FFYDQN9HTEFML49.SQUARE.jpg http://cdn.instructables.com/FFY/DQN9/HTEFML49/FFYDQN9HTEFML49.SMALL.jpg Thereisonlyme So I have seen lots of Nixie clocks online and thought they looked great, however I didn't want to spend $100+ on a clock that doesn't even include the tubes! So with a little electronics knowledge I hunted around the various nixie tubes and circuits. I wanted to make something a little differe...
By: Thereisonlyme

Continue Reading »]]>
Sun, 30 Mar 2014 11:51:14 PDT
Soda Powered Light http://www.instructables.com/id/Soda-Powered-Light/
Soda Powered Light - More DIY How To Projects]]> http://cdn.instructables.com/F06/GS04/HT558Z3Q/F06GS04HT558Z3Q.SQUARE2.jpg http://cdn.instructables.com/F06/GS04/HT558Z3Q/F06GS04HT558Z3Q.SQUARE.jpg http://cdn.instructables.com/F06/GS04/HT558Z3Q/F06GS04HT558Z3Q.SMALL.jpg zposner A little history on the soda light I wanted to make the clock run on grass, so I tried it, and it worked, but it was dim and only lasted for about a minute. So i tried other stuff, that worked but it was expensive fruit, and for that price you could by a small battery. Later in the week we had a...
By: zposner

Continue Reading »]]>
Mon, 24 Mar 2014 17:20:10 PDT
Simplest Solar watch http://www.instructables.com/id/Simplest-Solar-watch/
Simplest Solar watch - More DIY How To Projects]]> http://cdn.instructables.com/FGF/D3RI/HSBWOQR5/FGFD3RIHSBWOQR5.SQUARE2.jpg http://cdn.instructables.com/FGF/D3RI/HSBWOQR5/FGFD3RIHSBWOQR5.SQUARE.jpg http://cdn.instructables.com/FGF/D3RI/HSBWOQR5/FGFD3RIHSBWOQR5.SMALL.jpg tech savvy Hello everyone ,  I'am proud to say I have reached over 50 subscribers , :-) I just want to thank all of them for there support  , and also want to thank the Instructable Community for making me a pro member , so the best way I know to thank everyone is posting one of my latest projects ,  So to s...
By: tech savvy

Continue Reading »]]>
Mon, 3 Mar 2014 16:07:10 PST
vintage style nixie wall clock http://www.instructables.com/id/vintage-style-nixie-wall-clock/
vintage style nixie wall clock - More DIY How To Projects]]> http://cdn.instructables.com/F8S/PXSK/HS8FUY0S/F8SPXSKHS8FUY0S.SQUARE2.jpg http://cdn.instructables.com/F8S/PXSK/HS8FUY0S/F8SPXSKHS8FUY0S.SQUARE.jpg http://cdn.instructables.com/F8S/PXSK/HS8FUY0S/F8SPXSKHS8FUY0S.SMALL.jpg andrea biffi After the success of my first nixie clock made out from a rosewood block, I decided to lose no time and to carry on with the next one. As some of you guys already know, or imagine, lately I'm indeed a little bit addicted to nixie-mania. I've bought many nixie tubes on eBay, and I experienced in elec...
By: andrea biffi

Continue Reading »]]>
Mon, 3 Mar 2014 13:36:13 PST
24 hours 1 cycle spinning globe. http://www.instructables.com/id/24-hours-1-cycle-spinning-globe/
24 hours 1 cycle spinning globe. - More DIY How To Projects]]> http://cdn.instructables.com/FYH/CCKO/HRPNBIPC/FYHCCKOHRPNBIPC.SQUARE2.jpg http://cdn.instructables.com/FYH/CCKO/HRPNBIPC/FYHCCKOHRPNBIPC.SQUARE.jpg http://cdn.instructables.com/FYH/CCKO/HRPNBIPC/FYHCCKOHRPNBIPC.SMALL.jpg Savvy001 This instructable shows u how u can easily build a globe that spins 1 cycle through 24 hours. Needed are: A. mini globe B. 24 hour clockwork C.Rubber washer D. Industry glue Material overview Here are all the components. The rubber washer and the part on the left of the washer came with the 24 ...
By: Savvy001

Continue Reading »]]>
Sun, 16 Feb 2014 16:08:46 PST
Creeper Alarm Clock http://www.instructables.com/id/Creeper-Alarm-Clock/
Creeper Alarm Clock - More DIY How To Projects]]> http://cdn.instructables.com/FKD/8M0L/HRI98YKZ/FKD8M0LHRI98YKZ.SQUARE2.jpg http://cdn.instructables.com/FKD/8M0L/HRI98YKZ/FKD8M0LHRI98YKZ.SQUARE.jpg http://cdn.instructables.com/FKD/8M0L/HRI98YKZ/FKD8M0LHRI98YKZ.SMALL.jpg zposner Supplies To make the creeper alarm clock you need:- a papercraft minecraft creeper- wood (measurements )- phone (I used an i phone without a case)- glue- clamp(s)- table saw Print and cut your paper craft creeper. Cut your wood to the following measurmentsYou need 2 (2 by 2 by 3/4 inch)....
By: zposner

Continue Reading »]]>
Tue, 11 Feb 2014 18:27:05 PST
Single digit numitron clock http://www.instructables.com/id/Single-digit-numitron-clock/
Single digit numitron clock - More DIY How To Projects]]> http://cdn.instructables.com/F04/XDLB/HR1712QX/F04XDLBHR1712QX.SQUARE2.jpg http://cdn.instructables.com/F04/XDLB/HR1712QX/F04XDLBHR1712QX.SQUARE.jpg http://cdn.instructables.com/F04/XDLB/HR1712QX/F04XDLBHR1712QX.SMALL.jpg pinomelean Numitrons are neat display devices similar to nixie tubes but designed for much lower voltages. Numitrons are basically incandescent displays in which filaments create the segments. They have a retro look that i liked so much. I bought 6x IV-9 russian numitrons in ebay, they were about 3$ eac...
By: pinomelean

Continue Reading »]]>
Sat, 8 Feb 2014 07:24:17 PST
Watch Parts as a work of art. http://www.instructables.com/id/Watch-Parts-as-a-work-of-art/
Watch Parts as a work of art. - More DIY How To Projects]]> http://cdn.instructables.com/FO5/NXGP/HR4SPFX8/FO5NXGPHR4SPFX8.SQUARE2.jpg http://cdn.instructables.com/FO5/NXGP/HR4SPFX8/FO5NXGPHR4SPFX8.SQUARE.jpg http://cdn.instructables.com/FO5/NXGP/HR4SPFX8/FO5NXGPHR4SPFX8.SMALL.jpg pbarbalena My very first big purchase after Air Force training camp was this $300 Bulova watch. After 12 years of service, I now give it a resting place on my desk. (It got water in it and some pieces rusted) Lay out each part. This was the most time consuming part. Dismantling the watch was easy, choosing...
By: pbarbalena

Continue Reading »]]>
Sat, 1 Feb 2014 13:37:44 PST
Batman Wall Clock http://www.instructables.com/id/Batman-Wall-Clock/
Batman Wall Clock - More DIY How To Projects]]> http://cdn.instructables.com/FY2/O9WX/HQV6HUMB/FY2O9WXHQV6HUMB.SQUARE2.jpg http://cdn.instructables.com/FY2/O9WX/HQV6HUMB/FY2O9WXHQV6HUMB.SQUARE.jpg http://cdn.instructables.com/FY2/O9WX/HQV6HUMB/FY2O9WXHQV6HUMB.SMALL.jpg tophattaylor_uk So over the last couple of weeks I have been making plans to decorate my godsons bedroom and he wanted a Batman themed room so thought I would start off easy and build him a Batman style wall clock. Its actually pretty simple to make and relatively low cost, ended up costing about £4. Most of you w...
By: tophattaylor_uk

Continue Reading »]]>
Sun, 26 Jan 2014 12:37:47 PST
KlockFun: Cuckoo Alarm Clock from Hard Drive http://www.instructables.com/id/KlockFun-Cuckoo-Alarm-Clock-from-Hard-Drive/
KlockFun: Cuckoo Alarm Clock from Hard Drive - More DIY How To Projects]]> http://cdn.instructables.com/FHG/F1BD/HQDUTZDN/FHGF1BDHQDUTZDN.SQUARE2.jpg http://cdn.instructables.com/FHG/F1BD/HQDUTZDN/FHGF1BDHQDUTZDN.SQUARE.jpg http://cdn.instructables.com/FHG/F1BD/HQDUTZDN/FHGF1BDHQDUTZDN.SMALL.jpg funelab Hi All, This is my first Instructable and it's a cuckoo alarm clock from hard drive: KlockFun. I love clocks and I want to I started designing a best alarm clock from an old hard disk drive, the earliest LED displays and a cuckoo bird. I want to bring the world of LED to as many enthusiasts and ho...
By: funelab

Continue Reading »]]>
Wed, 15 Jan 2014 19:58:15 PST
dynamiteclock http://www.instructables.com/id/dynamiteclock/
dynamiteclock - More DIY How To Projects]]> http://cdn.instructables.com/FOS/HWZY/HQA0CXRP/FOSHWZYHQA0CXRP.SQUARE2.jpg http://cdn.instructables.com/FOS/HWZY/HQA0CXRP/FOSHWZYHQA0CXRP.SQUARE.jpg http://cdn.instructables.com/FOS/HWZY/HQA0CXRP/FOSHWZYHQA0CXRP.SMALL.jpg alby21europa 10 minute and you have a bomb clock...hehe....inoffensive,of course..... You need: a old table clock,some elastic,electric wire,a old part of electronic, letter paper,old publicity brochure,a pvc tube,electrical tape or similar,black......... Preparing and assembling..... preparing 6 tube,rol...
By: alby21europa

Continue Reading »]]>
Fri, 10 Jan 2014 15:54:20 PST
Secret Watch Compartment http://www.instructables.com/id/Secret-Watch-Compartment/
Secret Watch Compartment - More DIY How To Projects]]> http://cdn.instructables.com/F8Y/ED3L/HQ45CI8V/F8YED3LHQ45CI8V.SQUARE2.jpg http://cdn.instructables.com/F8Y/ED3L/HQ45CI8V/F8YED3LHQ45CI8V.SQUARE.jpg http://cdn.instructables.com/F8Y/ED3L/HQ45CI8V/F8YED3LHQ45CI8V.SMALL.jpg kremer97 A place where nobody suspects. Take the back off You will have to unscrew or pry off depending on what kind of watch you have. Take the insides out You might need to break some things in there, so grab some tools necessary for doing so. Put a different back on it. I chose to tape a piece o...
By: kremer97

Continue Reading »]]>
Tue, 7 Jan 2014 08:56:07 PST
simple user-adjustable DIY Nixie Clock http://www.instructables.com/id/simple-user-adjustable-DIY-Nixie-Clock/
simple user-adjustable DIY Nixie Clock - More DIY How To Projects]]> http://cdn.instructables.com/FBR/ONSF/HQ70VV3B/FBRONSFHQ70VV3B.SQUARE2.jpg http://cdn.instructables.com/FBR/ONSF/HQ70VV3B/FBRONSFHQ70VV3B.SQUARE.jpg http://cdn.instructables.com/FBR/ONSF/HQ70VV3B/FBRONSFHQ70VV3B.SMALL.jpg andrea biffi As first instructable of the year I managed to finally complete my age-long nixie clock project. Nixies are neon valve tubes, where ten cathodes have shape of digits and are lighted up by plasma when high voltage flows through them. I love these old era displays, which have been employed in last ...
By: andrea biffi

Continue Reading »]]>
Mon, 6 Jan 2014 10:29:17 PST
Cords Wall Clock http://www.instructables.com/id/Cords-Wall-Clock/
Cords Wall Clock - More DIY How To Projects]]> http://cdn.instructables.com/F0P/N8BE/HPT94Q5C/F0PN8BEHPT94Q5C.SQUARE2.jpg http://cdn.instructables.com/F0P/N8BE/HPT94Q5C/F0PN8BEHPT94Q5C.SQUARE.jpg http://cdn.instructables.com/F0P/N8BE/HPT94Q5C/F0PN8BEHPT94Q5C.SMALL.jpg lindarose92 This is one of the nylon cords clocks I'm making for my Etsy shop.  Although it takes quite some time to make it, the technique I used is very simple so I decided to show you how to do it. You can make all the shapes you want with this technique and create many different things! All you need is cord...
By: lindarose92

Continue Reading »]]>
Tue, 31 Dec 2013 11:20:51 PST
The Clock Stash http://www.instructables.com/id/The-Clock-Stash/
The Clock Stash - More DIY How To Projects]]> http://cdn.instructables.com/FDN/XXJI/HPRIAL9B/FDNXXJIHPRIAL9B.SQUARE2.jpg http://cdn.instructables.com/FDN/XXJI/HPRIAL9B/FDNXXJIHPRIAL9B.SQUARE.jpg http://cdn.instructables.com/FDN/XXJI/HPRIAL9B/FDNXXJIHPRIAL9B.SMALL.jpg rdamon1 A secret compartment that is hidden in plain sight just don't let others change the battery. Getting In Take off the back plate that covers the battery and mechanism Stashing The Loot Now take what ever you want to hade from others and put it inside the clock. If you prefer you can even build...
By: rdamon1

Continue Reading »]]>
Sat, 28 Dec 2013 19:55:50 PST
Laser Clock - This Clock is ARMED WITH LIGHT http://www.instructables.com/id/Laser-Clock-This-Analog-Clock-is-ARMED-WITH-LIGHT/
Laser Clock - This Clock is ARMED WITH LIGHT - More DIY How To Projects]]> http://cdn.instructables.com/FDJ/EEC5/HPAUWDAC/FDJEEC5HPAUWDAC.SQUARE2.jpg http://cdn.instructables.com/FDJ/EEC5/HPAUWDAC/FDJEEC5HPAUWDAC.SQUARE.jpg http://cdn.instructables.com/FDJ/EEC5/HPAUWDAC/FDJEEC5HPAUWDAC.SMALL.jpg gallionstallion This is a simple, yet effective tutorial on how to replace the arms of a clock with a line laser.  This is a quick gen 1, but future generations could make this an awesome little clock. This is what you'll need: - line laser (http://dx.com/p/red-laser-module-focused-line-3-5v-4-5v-16mm-5mw-5928?sou...
By: gallionstallion

Continue Reading »]]>
Tue, 17 Dec 2013 10:53:27 PST
Tidal Clock http://www.instructables.com/id/Tidal-Clock/
Tidal Clock - More DIY How To Projects]]> http://cdn.instructables.com/F0V/9FVW/HP0CRBMJ/F0V9FVWHP0CRBMJ.SQUARE2.jpg http://cdn.instructables.com/F0V/9FVW/HP0CRBMJ/F0V9FVWHP0CRBMJ.SQUARE.jpg http://cdn.instructables.com/F0V/9FVW/HP0CRBMJ/F0V9FVWHP0CRBMJ.SMALL.jpg make77 This is a tutorial for making the Tidal Clock. The clock shows the ebb and flow between high and low tide by a rising and falling water level. It consists of an airtight acrylic container that has a front visible chamber and a back hidden chamber. A volume rotates through the back chamber, displacin...
By: make77

Continue Reading »]]>
Mon, 9 Dec 2013 18:27:01 PST
Potato Clock http://www.instructables.com/id/Potato-Clock-1/
Potato Clock - More DIY How To Projects]]> http://cdn.instructables.com/F7O/N4V2/HOHYORHD/F7ON4V2HOHYORHD.SQUARE2.jpg http://cdn.instructables.com/F7O/N4V2/HOHYORHD/F7ON4V2HOHYORHD.SQUARE.jpg http://cdn.instructables.com/F7O/N4V2/HOHYORHD/F7ON4V2HOHYORHD.SMALL.jpg stephpardo Materials Needed: - potato - digital clock - copper coin - zinc nail - 2 pieces of electric tape - 2 copper wires Step 1 Gather the required materials as listed in the materials needed list. Step 2 Wrap one copper wire around a zinc nail. Step 3 Wrap a piece of electric tape around the ...
By: stephpardo

Continue Reading »]]>
Mon, 2 Dec 2013 02:02:25 PST
IV-11 VFD Clock http://www.instructables.com/id/IV-11-VFD-Clock/
IV-11 VFD Clock - More DIY How To Projects]]> http://cdn.instructables.com/F33/Q3WO/HNRKFUKO/F33Q3WOHNRKFUKO.SQUARE2.jpg http://cdn.instructables.com/F33/Q3WO/HNRKFUKO/F33Q3WOHNRKFUKO.SQUARE.jpg http://cdn.instructables.com/F33/Q3WO/HNRKFUKO/F33Q3WOHNRKFUKO.SMALL.jpg rojm Here is my version of a VFD clock, running on Arduino (atmega328). I have researched many of the VFD clock threads out there and this is what came of it. Thanks to: Ladyada for the ice clock write up. www.ladyada.net/make/icetube/index.html Haris for the IV-11 write up. www.candrian.gr/index.ph...
By: rojm

Continue Reading »]]>
Fri, 8 Nov 2013 13:03:23 PST
Epilog Laser etched clock with photo http://www.instructables.com/id/Laser-etched-clock-with-photo/
Epilog Laser etched clock with photo - More DIY How To Projects]]> http://cdn.instructables.com/FKV/TD4N/HM8DDEEW/FKVTD4NHM8DDEEW.SQUARE2.jpg http://cdn.instructables.com/FKV/TD4N/HM8DDEEW/FKVTD4NHM8DDEEW.SQUARE.jpg http://cdn.instructables.com/FKV/TD4N/HM8DDEEW/FKVTD4NHM8DDEEW.SMALL.jpg Waldo120 So, my wife insists on having a clock in every room, and always complains that there aren't enough pictures of her and our son around. So I thought, what better gift for her then a clock with a photo of her and our son on it? In addition I positioned the hour numbers closer to the hour hand and add...
By: Waldo120

Continue Reading »]]>
Thu, 3 Oct 2013 22:33:01 PDT
DIY pool table wall clock. http://www.instructables.com/id/DIY-pool-table-wall-clock/
DIY pool table wall clock. - More DIY How To Projects]]> http://cdn.instructables.com/FSC/CRK7/HM8DDOUB/FSCCRK7HM8DDOUB.SQUARE2.jpg http://cdn.instructables.com/FSC/CRK7/HM8DDOUB/FSCCRK7HM8DDOUB.SQUARE.jpg http://cdn.instructables.com/FSC/CRK7/HM8DDOUB/FSCCRK7HM8DDOUB.SMALL.jpg out-of-the-box I love pool and all things related to pool. And because of that I made this! I turned a kids toy pool table into a wall clock, using the balls as the numbers indicating the time. Why didn't I play it instead? Well I tried. But after years of playing on a real table this one just lacked everything. W...
By: out-of-the-box

Continue Reading »]]>
Wed, 2 Oct 2013 21:12:01 PDT
Walnut Wall Clock, with a splash of geek http://www.instructables.com/id/Walnut-Wall-Clock-with-a-splash-of-geek/
Walnut Wall Clock, with a splash of geek - More DIY How To Projects]]> http://cdn.instructables.com/FAR/SFC3/HM8DBQSF/FARSFC3HM8DBQSF.SQUARE2.jpg http://cdn.instructables.com/FAR/SFC3/HM8DBQSF/FARSFC3HM8DBQSF.SQUARE.jpg http://cdn.instructables.com/FAR/SFC3/HM8DBQSF/FARSFC3HM8DBQSF.SMALL.jpg kludge77 This is a turned walnut wall clock with an inset  CD. For this project you will need some materials: A blank that measures, 10" square by 3/4 thick. (This can very depending on how think an outer ring you want) A CD (I microwaved mine for 3 seconds) Super Glue Clock moment (Klockit.com has great p...
By: kludge77

Continue Reading »]]>
Wed, 2 Oct 2013 08:57:00 PDT
Perpetual calendar http://www.instructables.com/id/Perpetual-calendar/
Perpetual calendar - More DIY How To Projects]]> http://cdn.instructables.com/FIP/V8H5/HLJUZT4Q/FIPV8H5HLJUZT4Q.SQUARE2.jpg http://cdn.instructables.com/FIP/V8H5/HLJUZT4Q/FIPV8H5HLJUZT4Q.SQUARE.jpg http://cdn.instructables.com/FIP/V8H5/HLJUZT4Q/FIPV8H5HLJUZT4Q.SMALL.jpg SteevAtBlueDust I was in a homewares store, and saw a calendar which works for any day/month/year from now until.. well... until forever, I guess! It looked like this: http://www.2shopper.com/Cubes_Perpetual_Calendar_p/mma89169.htm It's a nice idea, but it was rather bulky and used more tiles to indicate the day...
By: SteevAtBlueDust

Continue Reading »]]>
Sun, 15 Sep 2013 09:27:36 PDT
Custom digital clock from wood and Jeep VIC http://www.instructables.com/id/Custom-digital-clock-from-wood-and-Jeep-VIC/
Custom digital clock from wood and Jeep VIC - More DIY How To Projects]]> http://cdn.instructables.com/FDM/MBA4/HLA10TVU/FDMMBA4HLA10TVU.SQUARE2.jpg http://cdn.instructables.com/FDM/MBA4/HLA10TVU/FDMMBA4HLA10TVU.SQUARE.jpg http://cdn.instructables.com/FDM/MBA4/HLA10TVU/FDMMBA4HLA10TVU.SMALL.jpg florlayamp     I was trolling through the junkyard in the usual Jeep section awhile back and I came across the Grand Cherokees. I saw that almost everyone of them still had the vehicle information center display still in them. I seen online that these displays show the time and date among other things like iss...
By: florlayamp

Continue Reading »]]>
Sat, 7 Sep 2013 14:22:49 PDT
Build a network clock (NCLK) with Microduino-RTC http://www.instructables.com/id/Build-a-network-clock-NCLK-with-Microduino-RTC/
Build a network clock (NCLK) with Microduino-RTC - More DIY How To Projects]]> http://cdn.instructables.com/FDC/SS7F/HKVKTGMI/FDCSS7FHKVKTGMI.SQUARE2.jpg http://cdn.instructables.com/FDC/SS7F/HKVKTGMI/FDCSS7FHKVKTGMI.SQUARE.jpg http://cdn.instructables.com/FDC/SS7F/HKVKTGMI/FDCSS7FHKVKTGMI.SMALL.jpg makermodule The resolvent of clock synchronization over internet. by PKJ, The web−based clock management system allows you to monitor clock status from wherever they are and centrally change settings. and this small device is built with PoE technology, thus IP clocks get their time, data and power from the sam...
By: makermodule

Continue Reading »]]>
Fri, 30 Aug 2013 07:55:05 PDT
Design your own watch http://www.instructables.com/id/Design-your-own-watch/
Design your own watch - More DIY How To Projects]]> http://cdn.instructables.com/FVO/YEB6/HKEWQK37/FVOYEB6HKEWQK37.SQUARE2.jpg http://cdn.instructables.com/FVO/YEB6/HKEWQK37/FVOYEB6HKEWQK37.SQUARE.jpg http://cdn.instructables.com/FVO/YEB6/HKEWQK37/FVOYEB6HKEWQK37.SMALL.jpg baurence Firstly I'd like to apologise for the poor lighting in the photos and any omissions, mistakes etc. in my instructions I'm a posting newbie. Secondly, I'm not actually making a watch from scratch but rather editing and adapting one to fit my own needs. Now that's out of the way I'll begin, like many...
By: baurence

Continue Reading »]]>
Fri, 16 Aug 2013 04:30:49 PDT
From a Coffeemaker to a Travel Alarm Clock http://www.instructables.com/id/From-a-Coffeemaker-to-a-Travel-Alarm-Clock/
From a Coffeemaker to a Travel Alarm Clock - More DIY How To Projects]]> http://cdn.instructables.com/F72/464O/HKDFFU3T/F72464OHKDFFU3T.SQUARE2.jpg http://cdn.instructables.com/F72/464O/HKDFFU3T/F72464OHKDFFU3T.SQUARE.jpg http://cdn.instructables.com/F72/464O/HKDFFU3T/F72464OHKDFFU3T.SMALL.jpg Josehf Murchison I am a big believer in a greener way of life so I reduce reuse recycle and repurpose, to this end I gather many things put out for the garbage, the computers I get my wife likes to rebuild and gives them away to people that can’t afford a computer. The other things I get to repair repurpose or strip...
By: Josehf Murchison

Continue Reading »]]>
Thu, 15 Aug 2013 02:05:27 PDT
Digital/Analog Clock - Arduino + PaperCraft http://www.instructables.com/id/DigitalAnalog-Clock-Arduino-PaperCraft/
Digital/Analog Clock - Arduino + PaperCraft - More DIY How To Projects]]> http://cdn.instructables.com/FI5/PMTF/HJUWSDVR/FI5PMTFHJUWSDVR.SQUARE2.jpg http://cdn.instructables.com/FI5/PMTF/HJUWSDVR/FI5PMTFHJUWSDVR.SQUARE.jpg http://cdn.instructables.com/FI5/PMTF/HJUWSDVR/FI5PMTFHJUWSDVR.SMALL.jpg alstroemeria In this instructable we will be recreating a clock inspired by Alvin Aronson's original design. When I first saw this clock I was very impressed by how clean an elegant the design was I immediately wanted to recreate this effect. Alvin Aronson's original design (made with corian and wood): I ho...
By: alstroemeria

Continue Reading »]]>
Mon, 5 Aug 2013 23:54:04 PDT
2.5" HDD Clock http://www.instructables.com/id/25-HDD-Clock/
2.5" HDD Clock - More DIY How To Projects]]> http://cdn.instructables.com/FAL/8XE9/HH2VKSOH/FAL8XE9HH2VKSOH.SQUARE2.jpg http://cdn.instructables.com/FAL/8XE9/HH2VKSOH/FAL8XE9HH2VKSOH.SQUARE.jpg http://cdn.instructables.com/FAL/8XE9/HH2VKSOH/FAL8XE9HH2VKSOH.SMALL.jpg willster273 This is a 2.5" HDD clock I made from a dead external hard drive. I used a 2.5" drive instead of a 3.5" drive as in the UK it is very hard to find clock movements that have a long enough spindle to go all the way through. This is my first instructable and I am 14, so any constructive criticism or co...
By: willster273

Continue Reading »]]>
Sat, 1 Jun 2013 08:31:53 PDT