Instructables: exploring - stepbystep - furniture http://www.instructables.com Thu, 18 Sep 2014 13:24:43 PDT BLOX v1.01 Broken Tile Table http://www.instructables.com/id/Broken-Tile-Table/
Broken Tile Table - More DIY How To Projects]]> http://cdn.instructables.com/FHR/IX4N/I07YN01Y/FHRIX4NI07YN01Y.SQUARE2.jpg http://cdn.instructables.com/FHR/IX4N/I07YN01Y/FHRIX4NI07YN01Y.SQUARE.jpg http://cdn.instructables.com/FHR/IX4N/I07YN01Y/FHRIX4NI07YN01Y.SMALL.jpg hharris11 This project started due to a mistake on my part. I bought an old wooden table to refinish. When started to sand the top layer I realized it was compressed wood and could not be refinished like natural wood, so I had to figure an alternate solution. Whats Needed Depending on the type of table a...
By: hharris11

Continue Reading »]]>
Thu, 18 Sep 2014 06:24:07 PDT
Hamster Wheel Standing Desk http://www.instructables.com/id/Hamster-Wheel-Standing-Desk/
Hamster Wheel Standing Desk - More DIY How To Projects]]> http://cdn.instructables.com/FAD/WP7S/I05EVAOZ/FADWP7SI05EVAOZ.SQUARE2.jpg http://cdn.instructables.com/FAD/WP7S/I05EVAOZ/FADWP7SI05EVAOZ.SQUARE.jpg http://cdn.instructables.com/FAD/WP7S/I05EVAOZ/FADWP7SI05EVAOZ.SMALL.jpg RobbGodshaw You are not reaching your current productivity potential. Numerous esteemed experts agree that standing is better than sitting and that walking is better than standing. Despite this, your workplace only provides inhumane chairs and stagnant standing desks for you to use while you struggle to get thr...
By: RobbGodshaw

Continue Reading »]]>
Tue, 16 Sep 2014 13:11:10 PDT
Rustic Bed Frame - Queen Size http://www.instructables.com/id/Rustic-Bed-Frame-Queen-Size/
Rustic Bed Frame - Queen Size - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FI6/TXLX/I07YNIEE/FI6TXLXI07YNIEE.SQUARE2.jpg http://www.instructables.com/files/deriv/FI6/TXLX/I07YNIEE/FI6TXLXI07YNIEE.SQUARE.jpg http://www.instructables.com/files/deriv/FI6/TXLX/I07YNIEE/FI6TXLXI07YNIEE.SMALL.jpg pyroboyn64 It started about a year ago. My wife and I were looking at hand made furniture and fell in love with a bed frame made of cedar. It was sanded and "rustic" meaning log form. We wanted to get it, but it cost $1,000. So I told my wife that I could make it. And so, six months later, I started the p...
By: pyroboyn64

Continue Reading »]]>
Sat, 13 Sep 2014 06:53:12 PDT
Pallet Coffee Table 2 http://www.instructables.com/id/Pallet-Coffee-Table-2-3/
Pallet Coffee Table 2 - More DIY How To Projects]]> http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SQUARE2.jpg http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SQUARE.jpg http://cdn.instructables.com/F50/VIJ0/I00TG5DM/F50VIJ0I00TG5DM.SMALL.jpg sbrenner 1.Made this coffee table out of 2 pallets2. Sanded with 120 grit3. Stained with a Dark Cherry Stain4. Polyurethaned it5. Resanded/scuffed up to give it a glossy and rough look.
By: sbrenner

Continue Reading »]]>
Sat, 13 Sep 2014 06:11:49 PDT
Garden Bench Refurb http://www.instructables.com/id/Garden-Bench-Refurb/
Garden Bench Refurb - More DIY How To Projects]]> http://cdn.instructables.com/FJQ/5O22/HZZ3I63A/FJQ5O22HZZ3I63A.SQUARE2.jpg http://cdn.instructables.com/FJQ/5O22/HZZ3I63A/FJQ5O22HZZ3I63A.SQUARE.jpg http://cdn.instructables.com/FJQ/5O22/HZZ3I63A/FJQ5O22HZZ3I63A.SMALL.jpg ajohnson145 This project started when I was talking with my landlord about a bench he has at his other property. It was rusty and rotten but I could see the potential. He ended up letting me have it for free because it wasn't safe to use and a bit of an eye sore. I had to remove one side to get it into my car. ...
By: ajohnson145

Continue Reading »]]>
Thu, 11 Sep 2014 22:38:05 PDT
Ladder Chair / Library Chair http://www.instructables.com/id/Ladder-Chair-Library-Chair/
Ladder Chair / Library Chair - More DIY How To Projects]]> http://cdn.instructables.com/F5F/CXIW/HZXYKAXN/F5FCXIWHZXYKAXN.SQUARE2.jpg http://cdn.instructables.com/F5F/CXIW/HZXYKAXN/F5FCXIWHZXYKAXN.SQUARE.jpg http://cdn.instructables.com/F5F/CXIW/HZXYKAXN/F5FCXIWHZXYKAXN.SMALL.jpg shazni Originally designed by Benjamin Franklin, this chair has been referred as library chair, ladder chair, convertible chair, folding step chair. What ever the name, the purpose of the chair was the same. To convert a chair quickly into a step ladder. It is a fantastically useful furniture to have in an...
By: shazni

Continue Reading »]]>
Thu, 11 Sep 2014 09:55:24 PDT
Make your own wood patio furniture http://www.instructables.com/id/Make-your-own-wood-patio-furnitrure/
Make your own wood patio furniture - More DIY How To Projects]]> http://cdn.instructables.com/FOU/L3ZP/HZXYL95A/FOUL3ZPHZXYL95A.SQUARE2.jpg http://cdn.instructables.com/FOU/L3ZP/HZXYL95A/FOUL3ZPHZXYL95A.SQUARE.jpg http://cdn.instructables.com/FOU/L3ZP/HZXYL95A/FOUL3ZPHZXYL95A.SMALL.jpg dezine A few months back I featured an article on making your own designer patio furniture. I did mention that this was my dream patio suite and that I would be making my own patio furniture when time allowed and I have now completed the sofa part of the suite.I had to make some modifications to the origin...
By: dezine

Continue Reading »]]>
Thu, 11 Sep 2014 08:56:51 PDT
Cedar Platform Bed. Rebuilt http://www.instructables.com/id/Platform-Bed-TakeTwo/
Cedar Platform Bed. Rebuilt - More DIY How To Projects]]> http://cdn.instructables.com/FLO/WX1A/HZTT8NME/FLOWX1AHZTT8NME.SQUARE2.jpg http://cdn.instructables.com/FLO/WX1A/HZTT8NME/FLOWX1AHZTT8NME.SQUARE.jpg http://cdn.instructables.com/FLO/WX1A/HZTT8NME/FLOWX1AHZTT8NME.SMALL.jpg jprussack Looking to maximize the space of your apartment?A platform bed is an ideal way to gain storage and create a comfortable space. Create a custom platform bed following the building basics show here for any room! This project can be completed over the weekend using tools and materials that costs less t...
By: jprussack

Continue Reading »]]>
Mon, 8 Sep 2014 14:16:11 PDT
Make a Simple Headboard from Cabinet Doors http://www.instructables.com/id/Make-a-Simple-Headboard-from-Cabinet-Doors/
Make a Simple Headboard from Cabinet Doors - More DIY How To Projects]]> http://cdn.instructables.com/F7Z/DJNP/HZS8SYBK/F7ZDJNPHZS8SYBK.SQUARE2.jpg http://cdn.instructables.com/F7Z/DJNP/HZS8SYBK/F7ZDJNPHZS8SYBK.SQUARE.jpg http://cdn.instructables.com/F7Z/DJNP/HZS8SYBK/F7ZDJNPHZS8SYBK.SMALL.jpg CabinetDoorGuys Make a headboard from cabinet doors. Supplies Needed Size Recommendations Choose Your Doors The total width of the doors, side by side, should correspond to the bed width. You can arrange this however you like! My headboard is for a twin bed - the doors are each 14" wide for a total width...
By: CabinetDoorGuys

Continue Reading »]]>
Sun, 7 Sep 2014 08:04:49 PDT
How to make a Workbench http://www.instructables.com/id/How-to-make-a-Workbench-1/
How to make a Workbench - More DIY How To Projects]]> http://cdn.instructables.com/FRK/DXHK/HZPDYY56/FRKDXHKHZPDYY56.SQUARE2.jpg http://cdn.instructables.com/FRK/DXHK/HZPDYY56/FRKDXHKHZPDYY56.SQUARE.jpg http://cdn.instructables.com/FRK/DXHK/HZPDYY56/FRKDXHKHZPDYY56.SMALL.jpg WildmanProject I needed a good, strong, sturdy workbench in my garage, so I built one. The hard part is trying not to spend a ton of time and trying to make the "perfect" workbench. Make one that works for you and your needs. I had an idea in my head of what I wanted my workbench to look like. It was a design I ha...
By: WildmanProject

Continue Reading »]]>
Sat, 6 Sep 2014 08:57:12 PDT
Sawhorse Desk on the Cheap http://www.instructables.com/id/Sawhorse-Desk-on-the-Cheap/
Sawhorse Desk on the Cheap - More DIY How To Projects]]> http://cdn.instructables.com/F87/UHM4/HZNYJD2L/F87UHM4HZNYJD2L.SQUARE2.jpg http://cdn.instructables.com/F87/UHM4/HZNYJD2L/F87UHM4HZNYJD2L.SQUARE.jpg http://cdn.instructables.com/F87/UHM4/HZNYJD2L/F87UHM4HZNYJD2L.SMALL.jpg tomatoskins As a collage student and more importantly, as a maker, a desk is not optional. Living 120 miles from home, portability was a large designing constraint. And as a student with no job, doing things as inexpensive as possible is a must. The first place I looked was the local classifieds. Finding many d...
By: tomatoskins

Continue Reading »]]>
Thu, 4 Sep 2014 13:06:04 PDT
BenchBox http://www.instructables.com/id/BenchBox/
BenchBox - More DIY How To Projects]]> http://cdn.instructables.com/FYN/ZHOA/HZOL04SE/FYNZHOAHZOL04SE.SQUARE2.jpg http://cdn.instructables.com/FYN/ZHOA/HZOL04SE/FYNZHOAHZOL04SE.SQUARE.jpg http://cdn.instructables.com/FYN/ZHOA/HZOL04SE/FYNZHOAHZOL04SE.SMALL.jpg OliverS1 A BenchBox is a furniture unique industrial design that combines the ideas of a bench and a box (of course!).The BenchBox is a space saving furniture, this because it combines two diferent functions in a small confortable space. The functional and minimalist design create a link between the user of ...
By: OliverS1

Continue Reading »]]>
Thu, 4 Sep 2014 10:39:59 PDT
Wine Bottle Table http://www.instructables.com/id/Wine-Bottle-Table/
Wine Bottle Table - More DIY How To Projects]]> http://cdn.instructables.com/FFU/5M2S/HZNYGLTX/FFU5M2SHZNYGLTX.SQUARE2.jpg http://cdn.instructables.com/FFU/5M2S/HZNYGLTX/FFU5M2SHZNYGLTX.SQUARE.jpg http://cdn.instructables.com/FFU/5M2S/HZNYGLTX/FFU5M2SHZNYGLTX.SMALL.jpg fabiola.r.p.3 Hello guys! If you are the kind of people that tend to keep empty bottles here and there and don't know what to do with them after, we thought that this DIY idea would be nice for you since it's not that complicated and all you need is a wooden board of 48" x 32". Some things you'll need! You'll ...
By: fabiola.r.p.3

Continue Reading »]]>
Thu, 4 Sep 2014 07:48:04 PDT
Easy to make bench http://www.instructables.com/id/Easy-to-make-bench/
Easy to make bench - More DIY How To Projects]]> http://cdn.instructables.com/FV3/AKPX/HZL3VZ1B/FV3AKPXHZL3VZ1B.SQUARE2.jpg http://cdn.instructables.com/FV3/AKPX/HZL3VZ1B/FV3AKPXHZL3VZ1B.SQUARE.jpg http://cdn.instructables.com/FV3/AKPX/HZL3VZ1B/FV3AKPXHZL3VZ1B.SMALL.jpg Zrobto-Polish DIY Hi everyone . I from Poland . I'd like show you how to make easy bench . Let's do it . Please subscribe my youtube channel for more awesome movie .
By: Zrobto-Polish DIY

Continue Reading »]]>
Wed, 3 Sep 2014 05:39:08 PDT
Tip For How To Remove Dents From Wood With Just An Iron http://www.instructables.com/id/Tip-For-How-To-Remove-Dents-From-Wood-With-Just-An/
Tip For How To Remove Dents From Wood With Just An Iron - More DIY How To Projects]]> http://cdn.instructables.com/FL3/BAJZ/HZL3SFJB/FL3BAJZHZL3SFJB.SQUARE2.jpg http://cdn.instructables.com/FL3/BAJZ/HZL3SFJB/FL3BAJZHZL3SFJB.SQUARE.jpg http://cdn.instructables.com/FL3/BAJZ/HZL3SFJB/FL3BAJZHZL3SFJB.SMALL.jpg CapnGonzo Dented Wood When it comes to making furniture, it is important to have wood that is free of dents and scratches. During this particular build, I accidentally laid a piece of wood on the ground and it got all dented up, but it can easily be salvaged! All that you need is an iron. Ironing Out Th...
By: CapnGonzo

Continue Reading »]]>
Tue, 2 Sep 2014 17:32:47 PDT
co-sleeper http://www.instructables.com/id/co-sleeper/
co-sleeper - More DIY How To Projects]]> http://cdn.instructables.com/FR5/W2C5/HZJOPS7A/FR5W2C5HZJOPS7A.SQUARE2.jpg http://cdn.instructables.com/FR5/W2C5/HZJOPS7A/FR5W2C5HZJOPS7A.SQUARE.jpg http://cdn.instructables.com/FR5/W2C5/HZJOPS7A/FR5W2C5HZJOPS7A.SMALL.jpg plucas1 Ok this is my first Instructable so please bear with me.After the birth of my little angel we found she wanted a lot of attention even during sleep. The cot was too high and nothing was at bed height so I made a quick co-sleeper. Materials and tools Very simply I used 4 pieces of MDF, depending o...
By: plucas1

Continue Reading »]]>
Mon, 1 Sep 2014 17:52:05 PDT
How to paint MDF: quick tip http://www.instructables.com/id/How-to-paint-MDF-quick-tip/
How to paint MDF: quick tip - More DIY How To Projects]]> http://cdn.instructables.com/FGC/5EKT/HZJO6E2X/FGC5EKTHZJO6E2X.SQUARE2.jpg http://cdn.instructables.com/FGC/5EKT/HZJO6E2X/FGC5EKTHZJO6E2X.SQUARE.jpg http://cdn.instructables.com/FGC/5EKT/HZJO6E2X/FGC5EKTHZJO6E2X.SMALL.jpg EYSpace I recently made this bench with MDF and when it came time to paint it, I had trouble getting a smooth finish at the ends of the MDF boards – all the paint was sinking into the MDF leaving holes and a rough finish. Here’s an easy fix I discovered which works like a charm. Brush on glue mixture Dil...
By: EYSpace

Continue Reading »]]>
Mon, 1 Sep 2014 13:09:08 PDT
Table-top Mini-bar http://www.instructables.com/id/Table-top-Mini-bar/
Table-top Mini-bar - More DIY How To Projects]]> http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SQUARE2.jpg http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SQUARE.jpg http://cdn.instructables.com/FQQ/0UAC/HZJO93OP/FQQ0UACHZJO93OP.SMALL.jpg msparker In a few days i'll be going back for my final year at uni. So far its been great, but with the wisdom of 3 year behind me what could i do to improve the experience? a mini-bar of course!!!For my mini-bar i was going to build upon the experience of making a bar for my girlfriend: http://www.instructa...
By: msparker

Continue Reading »]]>
Mon, 1 Sep 2014 08:39:09 PDT
Adirondack Deck Chair http://www.instructables.com/id/Adirondack-Deck-Chair/
Adirondack Deck Chair - More DIY How To Projects]]> http://cdn.instructables.com/FQL/XWAQ/HZJO4OQ8/FQLXWAQHZJO4OQ8.SQUARE2.jpg http://cdn.instructables.com/FQL/XWAQ/HZJO4OQ8/FQLXWAQHZJO4OQ8.SQUARE.jpg http://cdn.instructables.com/FQL/XWAQ/HZJO4OQ8/FQLXWAQHZJO4OQ8.SMALL.jpg petachock I just bought myself a new bell tent this summer which is very swish. I have a camping chair but it is one of those generic fold out chairs with a cup holder, fairly comfortable and practicable yes, in-keeping with my new tent no! I needed a new one.I have made a couple of Adirondack chairs before s...
By: petachock

Continue Reading »]]>
Mon, 1 Sep 2014 04:52:18 PDT
Wall mounted Mini-bar http://www.instructables.com/id/Wall-mounted-Mini-bar/
Wall mounted Mini-bar - More DIY How To Projects]]> http://cdn.instructables.com/FA9/6HBT/HZI9BSSJ/FA96HBTHZI9BSSJ.SQUARE2.jpg http://cdn.instructables.com/FA9/6HBT/HZI9BSSJ/FA96HBTHZI9BSSJ.SQUARE.jpg http://cdn.instructables.com/FA9/6HBT/HZI9BSSJ/FA96HBTHZI9BSSJ.SMALL.jpg msparker With my girlfriends birthday coming up i decided to fulfil one of her requests and build her a mini-bar. After a bit of searching for inspiration I came up with a rough design and went from there. In general this is a fairly simple project, relatively cheap and produces a really stylish bar that is ...
By: msparker

Continue Reading »]]>
Mon, 1 Sep 2014 03:16:37 PDT
Work Table on Wheels | 4' X 8' http://www.instructables.com/id/Work-Table-on-Wheels-4-X-8/
Work Table on Wheels | 4' X 8' - More DIY How To Projects]]> http://cdn.instructables.com/FRG/YAAA/HZGTBE1O/FRGYAAAHZGTBE1O.SQUARE2.jpg http://cdn.instructables.com/FRG/YAAA/HZGTBE1O/FRGYAAAHZGTBE1O.SQUARE.jpg http://cdn.instructables.com/FRG/YAAA/HZGTBE1O/FRGYAAAHZGTBE1O.SMALL.jpg nuboynow Made at Tech Shop in Round Rock TX using only hand tools, this large 4' x 8' work table is easy to assemble even for the beginner. Designed for minimal waste and maneuverability, this table adds plenty of work space for the creative or maker of any type...and for a very affordable cost under $75! ...
By: nuboynow

Continue Reading »]]>
Sat, 30 Aug 2014 09:52:17 PDT
Scrap Pallet Table http://www.instructables.com/id/Scrap-Pallet-Table/
Scrap Pallet Table - More DIY How To Projects]]> http://cdn.instructables.com/FM7/N82M/HZGT9X1B/FM7N82MHZGT9X1B.SQUARE2.jpg http://cdn.instructables.com/FM7/N82M/HZGT9X1B/FM7N82MHZGT9X1B.SQUARE.jpg http://cdn.instructables.com/FM7/N82M/HZGT9X1B/FM7N82MHZGT9X1B.SMALL.jpg myrrh009 I was inspired to make this from wholman in furniture on instructables.com. The top portion is from two pallets (heat treated of course for safety not the chemical treated) and the legs are from some 30 year old scrap pine 1x10's I ripped down to the width of the pallet slats used on top. I W...
By: myrrh009

Continue Reading »]]>
Sat, 30 Aug 2014 09:47:01 PDT
Boho Headboard http://www.instructables.com/id/Boho-Headboard/
Boho Headboard - More DIY How To Projects]]> http://cdn.instructables.com/FT9/4VEM/HZGT9HER/FT94VEMHZGT9HER.SQUARE2.jpg http://cdn.instructables.com/FT9/4VEM/HZGT9HER/FT94VEMHZGT9HER.SQUARE.jpg http://cdn.instructables.com/FT9/4VEM/HZGT9HER/FT94VEMHZGT9HER.SMALL.jpg Mark Montano Make a bohemian style headboard with unexpected materials. Watch the video tutorial here! You'll need 4'x6' piece of 1/2" thick plywood400 wooden clothespins 2 jars of 150 joiner biscuits Americana Decor Chalky Finish paint in Innocence Pink and Serene Blue Rit Dye in Sunshine Orange, Apple G...
By: Mark Montano

Continue Reading »]]>
Sat, 30 Aug 2014 07:21:41 PDT
Over-The-Bed Whiteboard Worktable http://www.instructables.com/id/Over-The-Bed-Whiteboard-Worktable/
Over-The-Bed Whiteboard Worktable - More DIY How To Projects]]> http://cdn.instructables.com/F55/PPGL/HZDYDSRY/F55PPGLHZDYDSRY.SQUARE2.jpg http://cdn.instructables.com/F55/PPGL/HZDYDSRY/F55PPGLHZDYDSRY.SQUARE.jpg http://cdn.instructables.com/F55/PPGL/HZDYDSRY/F55PPGLHZDYDSRY.SMALL.jpg FabricateIO We believe that every living space should have a workspace that can bring ideas into reality. But if you're like us and don't have that convenient extra room or garage, you have to get a little creative with how you use the space you have. One such creative use of space is an over-the-bed worktable ...
By: FabricateIO

Continue Reading »]]>
Thu, 28 Aug 2014 07:01:34 PDT
Garden Fireplace with Bench http://www.instructables.com/id/Garden-Fireplace-with-Bench/
Garden Fireplace with Bench - More DIY How To Projects]]> http://cdn.instructables.com/F13/CWYV/HZB3JTY8/F13CWYVHZB3JTY8.SQUARE2.jpg http://cdn.instructables.com/F13/CWYV/HZB3JTY8/F13CWYVHZB3JTY8.SQUARE.jpg http://cdn.instructables.com/F13/CWYV/HZB3JTY8/F13CWYVHZB3JTY8.SMALL.jpg AllanS1 How to build a fireplace with a bench for your own garden. Working time approx. 2 days. Digging in... Use a pole to establish the center of the fireplace. This will be a reference point so make sure to use a long pole. Use a string and some spraypaint to mark the edge of the fireplace. Then you c...
By: AllanS1

Continue Reading »]]>
Tue, 26 Aug 2014 15:22:04 PDT
Reclaimed wood deck chair http://www.instructables.com/id/Reclaimed-wood-deck-chair/
Reclaimed wood deck chair - More DIY How To Projects]]> http://cdn.instructables.com/FPU/US2K/HZ9O7JAY/FPUUS2KHZ9O7JAY.SQUARE2.jpg http://cdn.instructables.com/FPU/US2K/HZ9O7JAY/FPUUS2KHZ9O7JAY.SQUARE.jpg http://cdn.instructables.com/FPU/US2K/HZ9O7JAY/FPUUS2KHZ9O7JAY.SMALL.jpg paracordperson550 In this instructable i will teach you how to make a reclaimed wood deck chair. in this instructable there are no measurements as the measurements are up to you can make it taller or thinner, fatter and wider or any way you want .im just here to show you the design Materials a lot of 1x4s an...
By: paracordperson550

Continue Reading »]]>
Mon, 25 Aug 2014 22:47:20 PDT
Chalkboard Old Window http://www.instructables.com/id/Chalkboard-Old-Window/
Chalkboard Old Window - More DIY How To Projects]]> http://cdn.instructables.com/F6Z/GJ9P/HZ88PH27/F6ZGJ9PHZ88PH27.SQUARE2.jpg http://cdn.instructables.com/F6Z/GJ9P/HZ88PH27/F6ZGJ9PHZ88PH27.SQUARE.jpg http://cdn.instructables.com/F6Z/GJ9P/HZ88PH27/F6ZGJ9PHZ88PH27.SMALL.jpg bluegirl1434 I painted an old window with chalkboard paint and wrote on it with chalk paint pens. I did this as a decoration for our wedding and also our house. First I taped around the window panr tape with Frog Tape (painted tape) this protect the old paint on the frame. Then I painted the window pane with...
By: bluegirl1434

Continue Reading »]]>
Sun, 24 Aug 2014 18:52:58 PDT
Cute Picture Frame http://www.instructables.com/id/Cute-Picture-Frame/
Cute Picture Frame - More DIY How To Projects]]> http://cdn.instructables.com/FSA/JQN8/HZB3HAUO/FSAJQN8HZB3HAUO.SQUARE2.jpg http://cdn.instructables.com/FSA/JQN8/HZB3HAUO/FSAJQN8HZB3HAUO.SQUARE.jpg http://cdn.instructables.com/FSA/JQN8/HZB3HAUO/FSAJQN8HZB3HAUO.SMALL.jpg ArtCAM Create a picture or mirror frame using a cnc or laser machine in ArtCAM Express.Things NeededWood or plastic for the size of the design you wantCNC or laser machineArtCAM Express Watch the video Designing the Frame 1 The first thing that is needed is to create the vectors for the Whale....
By: ArtCAM

Continue Reading »]]>
Sun, 24 Aug 2014 06:37:15 PDT
Multi-purpose Entertainment unit http://www.instructables.com/id/Multi-purpose-Entertainment-unit/
Multi-purpose Entertainment unit - More DIY How To Projects]]> http://cdn.instructables.com/F2U/EXSG/HZ6T9W85/F2UEXSGHZ6T9W85.SQUARE2.jpg http://cdn.instructables.com/F2U/EXSG/HZ6T9W85/F2UEXSGHZ6T9W85.SQUARE.jpg http://cdn.instructables.com/F2U/EXSG/HZ6T9W85/F2UEXSGHZ6T9W85.SMALL.jpg domenic3 1. I emailed my cutting list to the supplier and using a table saw they cut it to the precise measurements. I dry fitted my unit.4. I then transported my wood to school and gave it a light sanding. Using 120 grit sandpaper I lightly sanded the plywood.5. I joined the veneer using painters tape to c...
By: domenic3

Continue Reading »]]>
Sun, 24 Aug 2014 03:29:48 PDT
zero-emissions reclaimed bench http://www.instructables.com/id/zero-emissions-reclaimed-bench/
zero-emissions reclaimed bench - More DIY How To Projects]]> http://cdn.instructables.com/FN7/ZMV6/HZ6T7475/FN7ZMV6HZ6T7475.SQUARE2.jpg http://cdn.instructables.com/FN7/ZMV6/HZ6T7475/FN7ZMV6HZ6T7475.SQUARE.jpg http://cdn.instructables.com/FN7/ZMV6/HZ6T7475/FN7ZMV6HZ6T7475.SMALL.jpg timsway about two years ago i made this bench (and video) out of reclaimed barn wood using only old-fashioned tools and zero electricity just because i felt like it. i was just posting a different vid and i saw the 'hand tools' contest so i figured i'd post this to throw into the contest. thanks! -tim
By: timsway

Continue Reading »]]>
Sat, 23 Aug 2014 10:24:53 PDT
how to glue together a tabletop http://www.instructables.com/id/how-to-glue-together-a-tabletop/
how to glue together a tabletop - More DIY How To Projects]]> http://cdn.instructables.com/FST/DP9H/HZ6T73BR/FSTDP9HHZ6T73BR.SQUARE2.jpg http://cdn.instructables.com/FST/DP9H/HZ6T73BR/FSTDP9HHZ6T73BR.SQUARE.jpg http://cdn.instructables.com/FST/DP9H/HZ6T73BR/FSTDP9HHZ6T73BR.SMALL.jpg timsway most of my how-to videos are a more about inspiration than teaching actual techniques. during a recent project that required me to glue a LOT of wood together, i got continually more efficient at it. when i reached maximum efficiency, i figured i'd show what i found to be a super fast and easy way t...
By: timsway

Continue Reading »]]>
Sat, 23 Aug 2014 10:18:31 PDT
Comic Book Themed Side Table (that lights up!) http://www.instructables.com/id/Comic-Book-Themed-Side-Table-that-lights-up/
Comic Book Themed Side Table (that lights up!) - More DIY How To Projects]]> http://cdn.instructables.com/FGD/K1VY/HZ3YD2HV/FGDK1VYHZ3YD2HV.SQUARE2.jpg http://cdn.instructables.com/FGD/K1VY/HZ3YD2HV/FGDK1VYHZ3YD2HV.SQUARE.jpg http://cdn.instructables.com/FGD/K1VY/HZ3YD2HV/FGDK1VYHZ3YD2HV.SMALL.jpg briandamge Hello! The woman needed a side table for her new apartment so I made her one from some salvaged wood, LED strip lights, and a couple other things. This project is also detailed on my own website, CreationsOfMyMind.com, but I'm writing a separate Instructable for all you lovely people. Since...
By: briandamge

Continue Reading »]]>
Thu, 21 Aug 2014 16:53:57 PDT
Ikea Hack: Painted Branch Bed Frame http://www.instructables.com/id/Ikea-Hack-Painted-Branch-Bed-Frame/
Ikea Hack: Painted Branch Bed Frame - More DIY How To Projects]]> http://cdn.instructables.com/FKD/F9YS/HZ3YCAVE/FKDF9YSHZ3YCAVE.SQUARE2.jpg http://cdn.instructables.com/FKD/F9YS/HZ3YCAVE/FKDF9YSHZ3YCAVE.SQUARE.jpg http://cdn.instructables.com/FKD/F9YS/HZ3YCAVE/FKDF9YSHZ3YCAVE.SMALL.jpg dashiell.barkhuss This hack requires a very inexpensive twin Fjellse Ikea bed frame, paint, and free branches from the great outdoors. Materials and Tools Materials1. Twin Fjellse Bed Frame2. Branches- around 5/8 inch - 1 inch thick3. Latex Paint- in various colors of your choosing. Satin finish or higher gloss fi...
By: dashiell.barkhuss

Continue Reading »]]>
Thu, 21 Aug 2014 14:44:06 PDT
Twisted_Stool http://www.instructables.com/id/TwistedStool-1/
Twisted_Stool - More DIY How To Projects]]> http://cdn.instructables.com/FHF/J5PJ/HZ6T6MUM/FHFJ5PJHZ6T6MUM.SQUARE2.jpg http://cdn.instructables.com/FHF/J5PJ/HZ6T6MUM/FHFJ5PJHZ6T6MUM.SQUARE.jpg http://cdn.instructables.com/FHF/J5PJ/HZ6T6MUM/FHFJ5PJHZ6T6MUM.SMALL.jpg hisashi_kun このスツールはTwisted Stoolです。FDM方式の3Dプリンタの造形法としてポピュラーな 『Twisted』という技法を用いて作成しました。 http://www.thingiverse.com/search?q=twisted&sa= この技法を用いる事で、サポートレス、中空なスツールを迅速に作成する事を可能としています。 加工用データ http://www.thingiverse.com/thing:431315 [tools] 3D printer : Makerbot Replicator Origin Laser cutting machine : Unive...
By: hisashi_kun

Continue Reading »]]>
Thu, 21 Aug 2014 11:19:22 PDT
Love Story http://www.instructables.com/id/Love-Story/
Love Story - More DIY How To Projects]]> http://cdn.instructables.com/FGZ/JY6Y/HZ2IWXAB/FGZJY6YHZ2IWXAB.SQUARE2.jpg http://cdn.instructables.com/FGZ/JY6Y/HZ2IWXAB/FGZJY6YHZ2IWXAB.SQUARE.jpg http://cdn.instructables.com/FGZ/JY6Y/HZ2IWXAB/FGZJY6YHZ2IWXAB.SMALL.jpg bluegirl1434 I painted these words/design onto a board using pencil then acrylic paint. I used it for decoration at our wedding and now in our house.
By: bluegirl1434

Continue Reading »]]>
Wed, 20 Aug 2014 11:25:41 PDT
Guest Book Table http://www.instructables.com/id/Guest-Book-Table/
Guest Book Table - More DIY How To Projects]]> http://cdn.instructables.com/FNV/6CYY/HZ2IWVMW/FNV6CYYHZ2IWVMW.SQUARE2.jpg http://cdn.instructables.com/FNV/6CYY/HZ2IWVMW/FNV6CYYHZ2IWVMW.SQUARE.jpg http://cdn.instructables.com/FNV/6CYY/HZ2IWVMW/FNV6CYYHZ2IWVMW.SMALL.jpg bluegirl1434 I found this table at a garage sale for 2 dollars. I wanted something unique and creative for our wedding guestbook. So my husband and I ( back then he was my fiance) sanded the original pink paint off and painted the table light tan. I wrote our initials and wedding date on it with an acrylic paint...
By: bluegirl1434

Continue Reading »]]>
Wed, 20 Aug 2014 11:19:59 PDT
Picture frames from scrap materials http://www.instructables.com/id/Picture-frames-from-scrap-materials/
Picture frames from scrap materials - More DIY How To Projects]]> http://cdn.instructables.com/FIR/CUUU/HZ13H1J8/FIRCUUUHZ13H1J8.SQUARE2.jpg http://cdn.instructables.com/FIR/CUUU/HZ13H1J8/FIRCUUUHZ13H1J8.SQUARE.jpg http://cdn.instructables.com/FIR/CUUU/HZ13H1J8/FIRCUUUHZ13H1J8.SMALL.jpg Elliot Lord This is a very quick and easy way to make some nice looking picture frames from basic materials.The tools I used were just a saw and a mitre block. You may need a hammer if you do some of the steps I mention, but I didn't. Also some small tacks and wood glue are needed. The backing board These pi...
By: Elliot Lord

Continue Reading »]]>
Tue, 19 Aug 2014 16:06:31 PDT
End Tables Made From Fencing Boards http://www.instructables.com/id/End-Tables-Made-From-Fencing-Boards/
End Tables Made From Fencing Boards - More DIY How To Projects]]> http://cdn.instructables.com/FIJ/7D7A/HYZX4BDU/FIJ7D7AHYZX4BDU.SQUARE2.jpg http://cdn.instructables.com/FIJ/7D7A/HYZX4BDU/FIJ7D7AHYZX4BDU.SQUARE.jpg http://cdn.instructables.com/FIJ/7D7A/HYZX4BDU/FIJ7D7AHYZX4BDU.SMALL.jpg Bike2work I LOVE this website and have been reading the projects here since around 2006. I thought it was about time I posted one of my own. Better late than never. This is my most recent project and involves building end tables to fit the small gaps on either side of my couch. I hope you enjoy.I used redw...
By: Bike2work

Continue Reading »]]>
Mon, 18 Aug 2014 23:25:48 PDT
Rustic Decking and Table Top from Tree Trunks http://www.instructables.com/id/Rustic-decking-and-table-top-from-tree-trunks/
Rustic Decking and Table Top from Tree Trunks - More DIY How To Projects]]> http://cdn.instructables.com/FB9/BI40/HYY8JR9A/FB9BI40HYY8JR9A.SQUARE2.jpg http://cdn.instructables.com/FB9/BI40/HYY8JR9A/FB9BI40HYY8JR9A.SQUARE.jpg http://cdn.instructables.com/FB9/BI40/HYY8JR9A/FB9BI40HYY8JR9A.SMALL.jpg Tecwyn Twmffat Using just a chainsaw, a cordless drill, an angle grinder and a hammer, tree trunks straight from the forest can be turned into fantastic old world style rustic platforms such as decking and banquet sized table tops. Difficulty: . . . . . . . . . . You need ...
By: Tecwyn Twmffat

Continue Reading »]]>
Sun, 17 Aug 2014 09:14:28 PDT
Rack for Small Storage/Display http://www.instructables.com/id/Rack-for-Small-StorageDisplay/
Rack for Small Storage/Display - More DIY How To Projects]]> http://cdn.instructables.com/F2T/LKWF/HYTNYUUY/F2TLKWFHYTNYUUY.SQUARE2.jpg http://cdn.instructables.com/F2T/LKWF/HYTNYUUY/F2TLKWFHYTNYUUY.SQUARE.jpg http://cdn.instructables.com/F2T/LKWF/HYTNYUUY/F2TLKWFHYTNYUUY.SMALL.jpg SuperiorBuilder Storage/Display-Rack:When you start the display rack make sure you have:Long Board,Thin Ply-Wood,Table Saw,LETS START! Cutting the board to the accustom length. STEP 1:When you start take the board and cut it to the length of how big you would like the display to be. Cutting the slits into th...
By: SuperiorBuilder

Continue Reading »]]>
Thu, 14 Aug 2014 19:36:22 PDT
Batman Epoxy Coffee Table http://www.instructables.com/id/Batman-Epoxy-Coffee-Table/
Batman Epoxy Coffee Table - More DIY How To Projects]]> http://cdn.instructables.com/FTF/7WDB/HYTNX4R1/FTF7WDBHYTNX4R1.SQUARE2.jpg http://cdn.instructables.com/FTF/7WDB/HYTNX4R1/FTF7WDBHYTNX4R1.SQUARE.jpg http://cdn.instructables.com/FTF/7WDB/HYTNX4R1/FTF7WDBHYTNX4R1.SMALL.jpg ckemper Fun project to make a unique coffee table. Getting Started I started my quest to create a Batman Coffee Table by searching for a unique coffee table to use. I stopped at the Racine, Wisconsin Habitat ReStore Construction Materials Reuse Center and found a good size table with a cracked piece of m...
By: ckemper

Continue Reading »]]>
Thu, 14 Aug 2014 13:48:07 PDT
Office Door Turned Headboard http://www.instructables.com/id/Office-Door-Turned-Headboard/
Office Door Turned Headboard - More DIY How To Projects]]> http://cdn.instructables.com/FIK/REI6/HYSU5FXS/FIKREI6HYSU5FXS.SQUARE2.jpg http://cdn.instructables.com/FIK/REI6/HYSU5FXS/FIKREI6HYSU5FXS.SQUARE.jpg http://cdn.instructables.com/FIK/REI6/HYSU5FXS/FIKREI6HYSU5FXS.SMALL.jpg zachmikrut When my wife and I moved into our new home, there was an odd patio-type door on the third bedroom. Figuring that our guests would want a little privacy and not wake up to two cats staring through the door in the middle of the night, we replaced the door and stashed the old one for a later project. T...
By: zachmikrut

Continue Reading »]]>
Wed, 13 Aug 2014 13:31:03 PDT
Self cooling aquarium stand http://www.instructables.com/id/Temperature-self-regulating-aquarium-stand/
Self cooling aquarium stand - More DIY How To Projects]]> http://cdn.instructables.com/FY9/OTGW/HYR3DLXO/FY9OTGWHYR3DLXO.SQUARE2.jpg http://cdn.instructables.com/FY9/OTGW/HYR3DLXO/FY9OTGWHYR3DLXO.SQUARE.jpg http://cdn.instructables.com/FY9/OTGW/HYR3DLXO/FY9OTGWHYR3DLXO.SMALL.jpg andyup1 I have a pet axolotl. They like water to be in the upper 60s F, and my ambient temperature is around the lower 70s. This isn't great on axolotls, so, they usually need something to cool down the water. Thing about axolotls and a few other water pets is that they require special attention. I've learn...
By: andyup1

Continue Reading »]]>
Tue, 12 Aug 2014 12:08:33 PDT
Beehive shelves http://www.instructables.com/id/Beehive-shelves/
Beehive shelves - More DIY How To Projects]]> http://cdn.instructables.com/FM1/PHK8/HYPNXUIR/FM1PHK8HYPNXUIR.SQUARE2.jpg http://cdn.instructables.com/FM1/PHK8/HYPNXUIR/FM1PHK8HYPNXUIR.SQUARE.jpg http://cdn.instructables.com/FM1/PHK8/HYPNXUIR/FM1PHK8HYPNXUIR.SMALL.jpg Andrew Cleveland This technique uses masking tape to "clamp" when glueing mitred joints. Its a very useful technique if you need to join anything with more than 4 sides where clamps won't work. Ratchet straps also work but are more expencive. I'd like to thank Starck Joinery cc in Salt River, Cape Town for teaching ...
By: Andrew Cleveland

Continue Reading »]]>
Mon, 11 Aug 2014 14:04:51 PDT
Easy Modular Shelves http://www.instructables.com/id/Easy-Modular-Shelves/
Easy Modular Shelves - More DIY How To Projects]]> http://cdn.instructables.com/FHR/KFGI/HYMT123A/FHRKFGIHYMT123A.SQUARE2.jpg http://cdn.instructables.com/FHR/KFGI/HYMT123A/FHRKFGIHYMT123A.SQUARE.jpg http://cdn.instructables.com/FHR/KFGI/HYMT123A/FHRKFGIHYMT123A.SMALL.jpg carl5blum Hi:I had a large pile of 3/8" plywood pieces and a need for some more shelves. Since the pieces were all under 24" I looked for an easy way to make them. History of the Idea For years I've been making pigeon hole shelves like these. Just long strips of plywood with slots half way through. Slots o...
By: carl5blum

Continue Reading »]]>
Sat, 9 Aug 2014 12:38:44 PDT
Kids Table and Chair http://www.instructables.com/id/Kids-Table-and-Chair/
Kids Table and Chair - More DIY How To Projects]]> http://cdn.instructables.com/FOW/SO79/HYLZE5RO/FOWSO79HYLZE5RO.SQUARE2.jpg http://cdn.instructables.com/FOW/SO79/HYLZE5RO/FOWSO79HYLZE5RO.SQUARE.jpg http://cdn.instructables.com/FOW/SO79/HYLZE5RO/FOWSO79HYLZE5RO.SMALL.jpg against the grain Table and chair made from scrap wood, total cost was about $3 for paint brushed Gather tools, supplies and wood Gather the needed woodworking tools and wood. I used scrap wood and old paint.I had some old railing dowels and mdf board. Make the frame cut all wood to necessary measurements, wh...
By: against the grain

Continue Reading »]]>
Fri, 8 Aug 2014 14:52:46 PDT
Lace-Up Chair http://www.instructables.com/id/Lace-Up-Chair/
Lace-Up Chair - More DIY How To Projects]]> http://cdn.instructables.com/FLF/1PRX/HYPNXQC6/FLF1PRXHYPNXQC6.SQUARE2.jpg http://cdn.instructables.com/FLF/1PRX/HYPNXQC6/FLF1PRXHYPNXQC6.SQUARE.jpg http://cdn.instructables.com/FLF/1PRX/HYPNXQC6/FLF1PRXHYPNXQC6.SMALL.jpg JON-A-TRON If you want to use CAD software to design complex geometry, you don't have to have expensive CNC machines to make the finished product. With a local copy shop and a little patience, you can produce just about anything you can design in the computer. This instructable shows you how.The Lace-Up Chair ...
By: JON-A-TRON

Continue Reading »]]>
Thu, 7 Aug 2014 16:56:58 PDT
Backyard Tiki Bar http://www.instructables.com/id/Backyard-Tiki-Bar/
Backyard Tiki Bar - More DIY How To Projects]]> http://cdn.instructables.com/FZA/2ENU/HYJ3X902/FZA2ENUHYJ3X902.SQUARE2.jpg http://cdn.instructables.com/FZA/2ENU/HYJ3X902/FZA2ENUHYJ3X902.SQUARE.jpg http://cdn.instructables.com/FZA/2ENU/HYJ3X902/FZA2ENUHYJ3X902.SMALL.jpg Paige Russell There's nothing like a tropical theme to properly set the tone for summer fun. So my co-worker Jonathan Odom and I set about to design a quick and easy-to-build backyard tiki bar that will be guaranteed to bring the Hawaiian party to any outdoor gathering. (Brainstorming session inspiration courtes...
By: Paige Russell

Continue Reading »]]>
Thu, 7 Aug 2014 10:53:03 PDT
Simple minimalistic monitor stand http://www.instructables.com/id/Simple-minimalistic-monitor-stand/
Simple minimalistic monitor stand - More DIY How To Projects]]> http://cdn.instructables.com/F77/IBM8/HYHGEZLT/F77IBM8HYHGEZLT.SQUARE2.jpg http://cdn.instructables.com/F77/IBM8/HYHGEZLT/F77IBM8HYHGEZLT.SQUARE.jpg http://cdn.instructables.com/F77/IBM8/HYHGEZLT/F77IBM8HYHGEZLT.SMALL.jpg Diy_master I love minimalistic design and organized cables:) So I must do something with that books:) Process All process is on couple of pictures. click click ;) Note: read notes on the pictures
By: Diy_master

Continue Reading »]]>
Wed, 6 Aug 2014 11:02:54 PDT
Fire Pit Table http://www.instructables.com/id/Fire-Pit-Table/
Fire Pit Table - More DIY How To Projects]]> http://cdn.instructables.com/FAQ/I7TD/HYFNVOED/FAQI7TDHYFNVOED.SQUARE2.jpg http://cdn.instructables.com/FAQ/I7TD/HYFNVOED/FAQI7TDHYFNVOED.SQUARE.jpg http://cdn.instructables.com/FAQ/I7TD/HYFNVOED/FAQI7TDHYFNVOED.SMALL.jpg dethanb I've never been happy with what's available for the general public out there for a backyard fire pit. They are either too expensive, or don't suit the needs for what I was wanting. My goal was to have something I could sit around with family and friends, enjoy the nice ambiance of a flame, and be a...
By: dethanb

Continue Reading »]]>
Mon, 4 Aug 2014 19:05:05 PDT