Instructables: exploring - stepbystep - jewelry - featured http://www.instructables.com Sun, 1 Feb 2015 15:26:55 PST BLOX v1.01 Paracord necklaces http://www.instructables.com/id/Paracord-necklaces/
Paracord necklaces - More DIY How To Projects]]> http://cdn.instructables.com/FSB/R9Y0/I5BS59NK/FSBR9Y0I5BS59NK.SQUARE2.jpg http://cdn.instructables.com/FSB/R9Y0/I5BS59NK/FSBR9Y0I5BS59NK.SQUARE.jpg http://cdn.instructables.com/FSB/R9Y0/I5BS59NK/FSBR9Y0I5BS59NK.SMALL.jpg yrammies A while ago I saw a necklace online that seemed to be made out of paracord. I tried replicating it in this instructables, hope you enjoy! General introduction This necklace is actually relatively easy to make. Since I wanted it to have 5 strands without being too large I used the thinnest paraco...
By: yrammies

Continue Reading »]]>
Sun, 18 Jan 2015 17:22:56 PST
Rose cut natural raw Diamond ring http://www.instructables.com/id/Rose-cut-natural-raw-Diamond-ring/
Rose cut natural raw Diamond ring - More DIY How To Projects]]> http://cdn.instructables.com/FL3/ZLGE/I4UNI1C8/FL3ZLGEI4UNI1C8.SQUARE2.jpg http://cdn.instructables.com/FL3/ZLGE/I4UNI1C8/FL3ZLGEI4UNI1C8.SQUARE.jpg http://cdn.instructables.com/FL3/ZLGE/I4UNI1C8/FL3ZLGEI4UNI1C8.SMALL.jpg Honus Natural raw Diamonds have been pretty popular in the jewelry world lately. They have a very interesting and unique look to them with all kinds of wonderful colors with amazing depth. In order to really show the natural raw Diamond the ring design was kept very simple with just a small border of bead...
By: Honus

Continue Reading »]]>
Mon, 12 Jan 2015 23:25:41 PST
Wave design music box/jewelry box http://www.instructables.com/id/Wave-design-music-boxjewelry-box/
Wave design music box/jewelry box - More DIY How To Projects]]> http://cdn.instructables.com/FL8/JLVV/I4UNG5WN/FL8JLVVI4UNG5WN.SQUARE2.jpg http://cdn.instructables.com/FL8/JLVV/I4UNG5WN/FL8JLVVI4UNG5WN.SQUARE.jpg http://cdn.instructables.com/FL8/JLVV/I4UNG5WN/FL8JLVVI4UNG5WN.SMALL.jpg jaoami Decided to try putting a wave pattern that flows all the way around all 4 sides of a box. This gives the illusion that the ribbon form travels around the box, and the 'wave' form on the lid. These both use the same principle of cutting the 'field' piece of wood on a bandsaw, then regluing it back...
By: jaoami

Continue Reading »]]>
Mon, 12 Jan 2015 19:56:54 PST
New life for a vintage Opal ring http://www.instructables.com/id/New-life-for-an-old-ring/
New life for a vintage Opal ring - More DIY How To Projects]]> http://cdn.instructables.com/F60/0OJ4/I4SCL5TW/F600OJ4I4SCL5TW.SQUARE2.jpg http://cdn.instructables.com/F60/0OJ4/I4SCL5TW/F600OJ4I4SCL5TW.SQUARE.jpg http://cdn.instructables.com/F60/0OJ4/I4SCL5TW/F600OJ4I4SCL5TW.SMALL.jpg Honus This was a really fun project. At my work we're often brought older jewelry pieces to repair and modify and the owner of this vintage Opal ring wanted to keep part of her original ring and incorporate it into an entirely new design, which was a neat challenge. By creating a 3D model it was possible ...
By: Honus

Continue Reading »]]>
Mon, 12 Jan 2015 00:20:36 PST
Paper Airplane Pendant http://www.instructables.com/id/Paper-Airplane-Pendant/
Paper Airplane Pendant - More DIY How To Projects]]> http://cdn.instructables.com/F1E/P7FW/I4VK4TOO/F1EP7FWI4VK4TOO.SQUARE2.jpg http://cdn.instructables.com/F1E/P7FW/I4VK4TOO/F1EP7FWI4VK4TOO.SQUARE.jpg http://cdn.instructables.com/F1E/P7FW/I4VK4TOO/F1EP7FWI4VK4TOO.SMALL.jpg Brooklyntonia I love these glass frame pendants. They're inexpensive, versatile, and great for paper-cuts. You can cut any shape you'd like, but I've included steps for cutting this paper airplane. Materials PencilX-acto knifeGlass frame pendantPaperBlack markerStraight edge or ruler Template Trace the cen...
By: Brooklyntonia

Continue Reading »]]>
Sun, 11 Jan 2015 18:05:02 PST
Draw a 3d monogram pendant for 3d printing http://www.instructables.com/id/Draw-a-3d-monogram-pendant-for-3d-printing/
Draw a 3d monogram pendant for 3d printing - More DIY How To Projects]]> http://cdn.instructables.com/FND/TF6F/I4MMOT3E/FNDTF6FI4MMOT3E.SQUARE2.jpg http://cdn.instructables.com/FND/TF6F/I4MMOT3E/FNDTF6FI4MMOT3E.SQUARE.jpg http://cdn.instructables.com/FND/TF6F/I4MMOT3E/FNDTF6FI4MMOT3E.SMALL.jpg ugly These pendants make great gifts and are 3d printer friendly.I have numerous letter combinations available for download at http://www.thingiverse.com/Ugly/designs In your favorite 3d modeling tool create a 2 character text; your initials are a great start. Text height 25 mmText only needs to be...
By: ugly

Continue Reading »]]>
Wed, 7 Jan 2015 18:09:52 PST
Pan Chang Knotted Ring http://www.instructables.com/id/Pan-Chang-Knotted-Ring/
Pan Chang Knotted Ring - More DIY How To Projects]]> http://cdn.instructables.com/FJN/VUTJ/I4E68ZBL/FJNVUTJI4E68ZBL.SQUARE2.jpg http://cdn.instructables.com/FJN/VUTJ/I4E68ZBL/FJNVUTJI4E68ZBL.SQUARE.jpg http://cdn.instructables.com/FJN/VUTJ/I4E68ZBL/FJNVUTJI4E68ZBL.SMALL.jpg MaeBerry This is a Chinese knot called a Pan Chang knot which brings good luck to those who wear it. This is a great gift for someone as it is fairly easy, intricate, and beautiful. You could also just make one for yourself because they are very comfortable to wear. If you want to make it extra lucky, the tr...
By: MaeBerry

Continue Reading »]]>
Fri, 2 Jan 2015 11:12:03 PST
Fun & Easy Jewelry http://www.instructables.com/id/Fun-Easy-Jewelry/
Fun & Easy Jewelry - More DIY How To Projects]]> http://cdn.instructables.com/FI2/QCKX/I4CMV6RP/FI2QCKXI4CMV6RP.SQUARE2.jpg http://cdn.instructables.com/FI2/QCKX/I4CMV6RP/FI2QCKXI4CMV6RP.SQUARE.jpg http://cdn.instructables.com/FI2/QCKX/I4CMV6RP/FI2QCKXI4CMV6RP.SMALL.jpg Not_Tasha About a year ago I started learning to make my own jewelry. It's incredibly easy and I need something to go with a specific outfit or for a specific purpose, I can whip it up in a flash. From start to finish it only takes a couple of hours (because of drying times). It's also a lot of fun, makes gre...
By: Not_Tasha

Continue Reading »]]>
Fri, 2 Jan 2015 11:06:58 PST
Polymer Clay Flower Ball Pendant http://www.instructables.com/id/Polymer-Clay-Flower-Ball-Pendant/
Polymer Clay Flower Ball Pendant - More DIY How To Projects]]> http://cdn.instructables.com/FF9/1ZLU/I4CMNFCL/FF91ZLUI4CMNFCL.SQUARE2.jpg http://cdn.instructables.com/FF9/1ZLU/I4CMNFCL/FF91ZLUI4CMNFCL.SQUARE.jpg http://cdn.instructables.com/FF9/1ZLU/I4CMNFCL/FF91ZLUI4CMNFCL.SMALL.jpg tokutei12 Here's a cool, inexpensive present that you can make out of polymer clay! Polymer clay is an easy material to work with; you can usually buy a pack of one color for around $2-3, and it cures by baking in a conventional oven. I wanted to make a necklace pendant that was delicate and cute, and the res...
By: tokutei12

Continue Reading »]]>
Wed, 31 Dec 2014 20:05:28 PST
Modular Origami Earrings http://www.instructables.com/id/Modular-Origami-Earrings/
Modular Origami Earrings - More DIY How To Projects]]> http://cdn.instructables.com/FWY/J46U/I42MHJE0/FWYJ46UI42MHJE0.SQUARE2.jpg http://cdn.instructables.com/FWY/J46U/I42MHJE0/FWYJ46UI42MHJE0.SQUARE.jpg http://cdn.instructables.com/FWY/J46U/I42MHJE0/FWYJ46UI42MHJE0.SMALL.jpg tokutei12 Here's an easy but fun pair of earrings that you can make for a friend, a loved one, or yourself! The origami model is called a Japanese Brocade, designed by Minako Ishibashi. It's fairly simple to fold, but making them at a small scale might require a little extra patience. If folding tiny pieces o...
By: tokutei12

Continue Reading »]]>
Wed, 24 Dec 2014 15:05:02 PST
Tardis Pocket Watch: A Mini Holiday Story http://www.instructables.com/id/Tardis-Pocket-Watch-A-Mini-Holiday-Story/
Tardis Pocket Watch: A Mini Holiday Story - More DIY How To Projects]]> http://cdn.instructables.com/FPD/ZVRM/I3THY3LN/FPDZVRMI3THY3LN.SQUARE2.jpg http://cdn.instructables.com/FPD/ZVRM/I3THY3LN/FPDZVRMI3THY3LN.SQUARE.jpg http://cdn.instructables.com/FPD/ZVRM/I3THY3LN/FPDZVRMI3THY3LN.SMALL.jpg watchmeflyy This instructables is dedicated to the lovely Emily (emilyvanleemput), with whom I arranged a holiday gift swap. :) The 18th of August this year began as a normal day. Granted, it was only a few days before I'd be making the physical transition to university life, but still--a fairly normal day. How...
By: watchmeflyy

Continue Reading »]]>
Tue, 23 Dec 2014 11:56:14 PST
Living Plant Pendant Necklace http://www.instructables.com/id/Living-Plant-Pendant-Necklace/
Living Plant Pendant Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FCX/YCWO/I3THTHD2/FCXYCWOI3THTHD2.SQUARE2.jpg http://cdn.instructables.com/FCX/YCWO/I3THTHD2/FCXYCWOI3THTHD2.SQUARE.jpg http://cdn.instructables.com/FCX/YCWO/I3THTHD2/FCXYCWOI3THTHD2.SMALL.jpg confu Hi,Christmas is coming soon, I got a nasty cold, so I´m not really keen on last-minute-shopping in overcrowded malls. *sniff*My girlfriends only wish for christmas was some unusual jewelry, found some cool stuff online and ordered it, but I´m not sure if it will get here in time. So at least I have ...
By: confu

Continue Reading »]]>
Mon, 22 Dec 2014 13:10:50 PST
Single bead wirework pendant http://www.instructables.com/id/Single-bead-wirework-pendant/
Single bead wirework pendant - More DIY How To Projects]]> http://cdn.instructables.com/FSU/1B2P/I3VHLESD/FSU1B2PI3VHLESD.SQUARE2.jpg http://cdn.instructables.com/FSU/1B2P/I3VHLESD/FSU1B2PI3VHLESD.SQUARE.jpg http://cdn.instructables.com/FSU/1B2P/I3VHLESD/FSU1B2PI3VHLESD.SMALL.jpg emilyvanleemput When I get an idea for a pendant, I sketch it out and make it. Sometimes it turns out just the way I want it to, sometimes it doesn't. This is the perfect example of a pendant that didn't turn out the way I wanted it to. This pendant was the first attempt for my christmas gift exchange. Because of t...
By: emilyvanleemput

Continue Reading »]]>
Sun, 21 Dec 2014 05:56:02 PST
Triple swirl wirework pendant http://www.instructables.com/id/Triple-swirl-wirework-pendant/
Triple swirl wirework pendant - More DIY How To Projects]]> http://cdn.instructables.com/FKI/1AHK/I3VHLESG/FKI1AHKI3VHLESG.SQUARE2.jpg http://cdn.instructables.com/FKI/1AHK/I3VHLESG/FKI1AHKI3VHLESG.SQUARE.jpg http://cdn.instructables.com/FKI/1AHK/I3VHLESG/FKI1AHKI3VHLESG.SMALL.jpg emilyvanleemput All things I make start somewhere. Sometimes they get a succesful ending, sometimes I get totally lost in making it. If that happens, I just keeping working on it, hoping it can still be fixed. Most of the time, it can. This Christmas, I'm doing a gift exchange with the amazing watchmeflyy. I had a ...
By: emilyvanleemput

Continue Reading »]]>
Sun, 21 Dec 2014 05:56:01 PST
Climbing Zoidberg http://www.instructables.com/id/Climbing-Zoidberg/
Climbing Zoidberg - More DIY How To Projects]]> http://cdn.instructables.com/FYO/C40Z/I3THJJFP/FYOC40ZI3THJJFP.SQUARE2.jpg http://cdn.instructables.com/FYO/C40Z/I3THJJFP/FYOC40ZI3THJJFP.SQUARE.jpg http://cdn.instructables.com/FYO/C40Z/I3THJJFP/FYOC40ZI3THJJFP.SMALL.jpg Kiteman Doctor John A. Zoidberg is one of my favourite TV characters, largely for his resemblance to Curly of the Three Stooges.I'd never thought of a Zoidberg instructable, though, until Marc-FR made a passing comment on my Climbing Gorilla necklace:A Dr Zoidberg version of this gorilla should be awesome! ...
By: Kiteman

Continue Reading »]]>
Sat, 20 Dec 2014 04:06:43 PST
Harry Potter Amortentia Necklace http://www.instructables.com/id/Harry-Potter-Amortentia-Necklace/
Harry Potter Amortentia Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FQ3/UPTP/I3TH95YB/FQ3UPTPI3TH95YB.SQUARE2.jpg http://cdn.instructables.com/FQ3/UPTP/I3TH95YB/FQ3UPTPI3TH95YB.SQUARE.jpg http://cdn.instructables.com/FQ3/UPTP/I3TH95YB/FQ3UPTPI3TH95YB.SMALL.jpg OzzLpZ This is a project based on the Harry Potter Franchise/Universe. Though I must admit I am in no way a HUGE fan like most are. But do find the movies entertaining and fun to watch. However this project was inspired by someone who is indeed a HUGE fan of Harry Potter. Where one night drinking at Chile'...
By: OzzLpZ

Continue Reading »]]>
Thu, 18 Dec 2014 01:46:14 PST
How to make a Snowflake Necklace http://www.instructables.com/id/How-to-make-a-Snowflake-Necklace/
How to make a Snowflake Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FH9/8AEF/I3H5ITFI/FH98AEFI3H5ITFI.SQUARE2.jpg http://cdn.instructables.com/FH9/8AEF/I3H5ITFI/FH98AEFI3H5ITFI.SQUARE.jpg http://cdn.instructables.com/FH9/8AEF/I3H5ITFI/FH98AEFI3H5ITFI.SMALL.jpg Vikalpah It is about making a beautiful snowflake necklace for your sister, friend or your wife /girl friend (If you are a guy reading this post ;)) to gift this holiday season or may be one for yourself. It is so easy to make and you will be surprised "How gorgeous" it looks. If you can't afford for real di...
By: Vikalpah

Continue Reading »]]>
Mon, 15 Dec 2014 08:03:07 PST
Custom 3D Printed (in Silver) My Little Pony Charm http://www.instructables.com/id/Custom-3D-Printed-in-Silver-My-Little-Pony-Charm/
Custom 3D Printed (in Silver) My Little Pony Charm - More DIY How To Projects]]> http://cdn.instructables.com/FFX/5GVR/I3H5CEGN/FFX5GVRI3H5CEGN.SQUARE2.jpg http://cdn.instructables.com/FFX/5GVR/I3H5CEGN/FFX5GVRI3H5CEGN.SQUARE.jpg http://cdn.instructables.com/FFX/5GVR/I3H5CEGN/FFX5GVRI3H5CEGN.SMALL.jpg vanweb My 4 year old God-daughter loves My Little Pony (like all little girls it seems) but she has all of them and with Christmas coming up I needed a gift for her. Her second favourite thing is jewelry and unlike most 4 year olds she takes very good care of hers necklaces. Below are the steps I went thro...
By: vanweb

Continue Reading »]]>
Sun, 14 Dec 2014 20:18:52 PST
A Christmas Spider http://www.instructables.com/id/A-Christmas-Spider/
A Christmas Spider - More DIY How To Projects]]> http://cdn.instructables.com/FBT/K9W9/I3OFR1HF/FBTK9W9I3OFR1HF.SQUARE2.jpg http://cdn.instructables.com/FBT/K9W9/I3OFR1HF/FBTK9W9I3OFR1HF.SQUARE.jpg http://cdn.instructables.com/FBT/K9W9/I3OFR1HF/FBTK9W9I3OFR1HF.SMALL.jpg craftknowitall The story I heard, went something like this; Long ago a Mother was cleaning her house and all the spiders fled to the attic to get away from the broom. After it had grown quiet, the spiders returned to the down stairs to discover a beautiful tree, right in the room. The spiders were so excited tha...
By: craftknowitall

Continue Reading »]]>
Sun, 14 Dec 2014 19:43:04 PST
How to make a coin into a pendant http://www.instructables.com/id/How-to-make-a-coin-into-a-pendant/
How to make a coin into a pendant - More DIY How To Projects]]> http://cdn.instructables.com/FRL/VLT8/I3H7DVLZ/FRLVLT8I3H7DVLZ.SQUARE2.jpg http://cdn.instructables.com/FRL/VLT8/I3H7DVLZ/FRLVLT8I3H7DVLZ.SQUARE.jpg http://cdn.instructables.com/FRL/VLT8/I3H7DVLZ/FRLVLT8I3H7DVLZ.SMALL.jpg Danger is my middle name Last winter, one of my best friends and I went traveling through Europe together. It was definitely a memorable experience and for her birthday this year, I wanted to give her a memento from our awesome vacation. I had this 10 cent coin from our trip that I turned into a cute necklace for her to we...
By: Danger is my middle name

Continue Reading »]]>
Fri, 12 Dec 2014 09:49:12 PST
Beautiful Wood Ring And Box http://www.instructables.com/id/Beautiful-Wood-Ring-And-Box/
Beautiful Wood Ring And Box - More DIY How To Projects]]> http://cdn.instructables.com/FRA/H73C/I3H79RCI/FRAH73CI3H79RCI.SQUARE2.jpg http://cdn.instructables.com/FRA/H73C/I3H79RCI/FRAH73CI3H79RCI.SQUARE.jpg http://cdn.instructables.com/FRA/H73C/I3H79RCI/FRAH73CI3H79RCI.SMALL.jpg ClenseYourPallet This Christmas I wanted to make my wife something as beautiful as her.... That's impossible. But at least I can try. So for Christmas we do gifts a little different. We each get each other one larger item and then we focus on small special gifts that will fit in our stocking. I love working with woo...
By: ClenseYourPallet

Continue Reading »]]>
Thu, 11 Dec 2014 19:20:34 PST
Casting Rings - From Startup to Finish http://www.instructables.com/id/Casting-Rings-From-Startup-to-Finish/
Casting Rings - From Startup to Finish - More DIY How To Projects]]> http://cdn.instructables.com/FP9/FIGG/I3DQFDXX/FP9FIGGI3DQFDXX.SQUARE2.jpg http://cdn.instructables.com/FP9/FIGG/I3DQFDXX/FP9FIGGI3DQFDXX.SQUARE.jpg http://cdn.instructables.com/FP9/FIGG/I3DQFDXX/FP9FIGGI3DQFDXX.SMALL.jpg Sure Hacksalot Who has the budget for a customized, unique engagement ring? I certainly don't, especially being a college student. Heck, I had no idea how rings were even made. It wasn't until a friend of mine told me about how he designed his own engagement ring for his wife. This really intrigued me and so I sta...
By: Sure Hacksalot

Continue Reading »]]>
Sun, 7 Dec 2014 21:19:04 PST
Wooden Air Ship Necklace http://www.instructables.com/id/Wooden-Air-Ship-Necklace/
Wooden Air Ship Necklace - More DIY How To Projects]]> http://cdn.instructables.com/F9O/45UE/I3CWI50P/F9O45UEI3CWI50P.SQUARE2.jpg http://cdn.instructables.com/F9O/45UE/I3CWI50P/F9O45UEI3CWI50P.SQUARE.jpg http://cdn.instructables.com/F9O/45UE/I3CWI50P/F9O45UEI3CWI50P.SMALL.jpg Brooklyntonia A great gift for your steampunk enthusiast friends! I made this one for a friend of mine.MaterialsWood (The wood I used was a 1/4" and was a bit thick. I'd recommend 1/8".)ChainWatercolorPaintbrushPropeller (I used a metal flower from the scrapbooking section of the local craft store.)Wooden Button ...
By: Brooklyntonia

Continue Reading »]]>
Sun, 7 Dec 2014 11:05:30 PST
Climbing Gorilla Necklace http://www.instructables.com/id/Climbing-Gorilla-Necklace/
Climbing Gorilla Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FFZ/YHVY/I3DQ5NUJ/FFZYHVYI3DQ5NUJ.SQUARE2.jpg http://cdn.instructables.com/FFZ/YHVY/I3DQ5NUJ/FFZYHVYI3DQ5NUJ.SQUARE.jpg http://cdn.instructables.com/FFZ/YHVY/I3DQ5NUJ/FFZYHVYI3DQ5NUJ.SMALL.jpg Kiteman More than five years ago, I recreated a traditional wooden toy in cardboard. Hanging in my hallway, that toy, a climbing gorilla, has been surprisingly resilient, seeing regular use since then.Since I got my laser cutter, I've been intending to make a new gorilla, but I didn't just want to make exa...
By: Kiteman

Continue Reading »]]>
Sun, 7 Dec 2014 08:40:34 PST
Cross Stitch Wood Necklace http://www.instructables.com/id/Cross-Stitch-Wood-Necklace/
Cross Stitch Wood Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FEN/8XMX/I3CWI1BH/FEN8XMXI3CWI1BH.SQUARE2.jpg http://cdn.instructables.com/FEN/8XMX/I3CWI1BH/FEN8XMXI3CWI1BH.SQUARE.jpg http://cdn.instructables.com/FEN/8XMX/I3CWI1BH/FEN8XMXI3CWI1BH.SMALL.jpg Brooklyntonia I like to make a lot of the smaller gifts I get for colleagues and distant relatives. It makes it special, but not too expensive. I decided to make these cross stitched wood necklaces this year. It was easy to make and cost very little.Materials:WoodSaw with mitre boxDrillSmall drill bitSand paper (...
By: Brooklyntonia

Continue Reading »]]>
Sat, 6 Dec 2014 21:48:58 PST
Framed Pendant http://www.instructables.com/id/Framed-Pendant/
Framed Pendant - More DIY How To Projects]]> http://cdn.instructables.com/FJ9/BZ9G/I32WJCTR/FJ9BZ9GI32WJCTR.SQUARE2.jpg http://cdn.instructables.com/FJ9/BZ9G/I32WJCTR/FJ9BZ9GI32WJCTR.SQUARE.jpg http://cdn.instructables.com/FJ9/BZ9G/I32WJCTR/FJ9BZ9GI32WJCTR.SMALL.jpg photosfromrob I make jewelry and pens out of wood. Wood is such an exciting medium, each piece is different and there are countless varieties. Two pieces cut from the same piece can be totally different.Today I'm going to make a pendant out of flame box elder. I'll add accents of wenge and maple and then frame...
By: photosfromrob

Continue Reading »]]>
Sat, 29 Nov 2014 17:54:06 PST
The Ultimate Resistor Earrings http://www.instructables.com/id/The-Ultimate-Resistor-Earrings/
The Ultimate Resistor Earrings - More DIY How To Projects]]> http://cdn.instructables.com/FKJ/8A0Y/I32WFLBF/FKJ8A0YI32WFLBF.SQUARE2.jpg http://cdn.instructables.com/FKJ/8A0Y/I32WFLBF/FKJ8A0YI32WFLBF.SQUARE.jpg http://cdn.instructables.com/FKJ/8A0Y/I32WFLBF/FKJ8A0YI32WFLBF.SMALL.jpg Hack42Moem This is a fun project, completed at Hack42, to make as a gift for yourself or someone else. These earrings are geeky, stylish and shiny, and they can be as colourful as you like. The hoops are made from the rings that keep the platters in harddisks apart, so you may need to slaughter an old computer...
By: Hack42Moem

Continue Reading »]]>
Sat, 29 Nov 2014 03:32:35 PST
Silcone Mold Making for Investment Casting Pendant http://www.instructables.com/id/Silcone-Mold-Making-for-Investment-Casting-Pendant/
Silcone Mold Making for Investment Casting Pendant - More DIY How To Projects]]> http://cdn.instructables.com/F63/CMNA/I2X88G7P/F63CMNAI2X88G7P.SQUARE2.jpg http://cdn.instructables.com/F63/CMNA/I2X88G7P/F63CMNAI2X88G7P.SQUARE.jpg http://cdn.instructables.com/F63/CMNA/I2X88G7P/F63CMNAI2X88G7P.SMALL.jpg katwerre Hello!I work with Jim Kibler in his workshop. Together we have been making silicone molds for castings for decorative antique-style rifles. Most recently, I have been using silicone molds to make sterling silver necklace pendants out of ornate rococo thumb pieces.Since I first learned about the ar...
By: katwerre

Continue Reading »]]>
Tue, 25 Nov 2014 09:28:02 PST
Zelda Fairy Necklace http://www.instructables.com/id/Zelda-Fairy-Necklace/
Zelda Fairy Necklace - More DIY How To Projects]]> http://cdn.instructables.com/F8O/ZA8S/I2WDWID2/F8OZA8SI2WDWID2.SQUARE2.jpg http://cdn.instructables.com/F8O/ZA8S/I2WDWID2/F8OZA8SI2WDWID2.SQUARE.jpg http://cdn.instructables.com/F8O/ZA8S/I2WDWID2/F8OZA8SI2WDWID2.SMALL.jpg MsSweetSatisfaction OH man Zelda: A Link to the Past is my childhood in a cartridge. I played that game for hours a day as a child. The sad thing was that I never made any progress, I mean I was 6 and fruitlessly trying to compete with my 11 year old brother. Then again it wasn't that sad for me because all I really...
By: MsSweetSatisfaction

Continue Reading »]]>
Mon, 24 Nov 2014 14:11:16 PST
Get Fashion-y with Sugru! (Clip-on Snake Earrings) http://www.instructables.com/id/Get-Fashion-y-with-Sugru-Clip-on-Snake-Earrings/
Get Fashion-y with Sugru! (Clip-on Snake Earrings) - More DIY How To Projects]]> http://cdn.instructables.com/FNE/8P0E/I1XEJL14/FNE8P0EI1XEJL14.SQUARE2.jpg http://cdn.instructables.com/FNE/8P0E/I1XEJL14/FNE8P0EI1XEJL14.SQUARE.jpg http://cdn.instructables.com/FNE/8P0E/I1XEJL14/FNE8P0EI1XEJL14.SMALL.jpg fablabbaltimore For those of who do not have ears pierced, here is a cool creative trick!**Clip-on snake earrings** Soften your Sugru Pick your favorite color!We chose color black to contrast with gold laser-cut decorations that will serve as a pattern of the snake. Roll out your Sugru to a long line You ar...
By: fablabbaltimore

Continue Reading »]]>
Fri, 31 Oct 2014 08:35:07 PDT
Ombré Dyed 3D Printed Jewelry http://www.instructables.com/id/Ombré-Dyed-3D-Printed-Jewelry/
Ombré Dyed 3D Printed Jewelry - More DIY How To Projects]]> http://cdn.instructables.com/FS5/YF75/I1TQTCPU/FS5YF75I1TQTCPU.SQUARE2.jpg http://cdn.instructables.com/FS5/YF75/I1TQTCPU/FS5YF75I1TQTCPU.SQUARE.jpg http://cdn.instructables.com/FS5/YF75/I1TQTCPU/FS5YF75I1TQTCPU.SMALL.jpg smithallen_studio Continuing from my 3D printed jewelry instructable, I've been looking for ways to post-process resin 3D prints and jewelry pieces. After failed experiments with Acrylic to Mixol and trying to dye PLA prints from our everyday printer the Type A Machines Series 1 nothing was adhering in quite the rig...
By: smithallen_studio

Continue Reading »]]>
Wed, 29 Oct 2014 16:44:16 PDT
Art Deco Necklace http://www.instructables.com/id/Art-Deco-Necklace/
Art Deco Necklace - More DIY How To Projects]]> http://cdn.instructables.com/F38/CIA2/I2ELZ59H/F38CIA2I2ELZ59H.SQUARE2.jpg http://cdn.instructables.com/F38/CIA2/I2ELZ59H/F38CIA2I2ELZ59H.SQUARE.jpg http://cdn.instructables.com/F38/CIA2/I2ELZ59H/F38CIA2I2ELZ59H.SMALL.jpg Mark Montano Head to the hardware store (or dig around your tool box) to make these art deco inspired necklaces. Watch the video tutorial here! You'll need YOU'LL NEEDDrill Chain E-6000 Glue Corner brackets Cabochons Jump rings and a lobster claw Wire cutters Pliers Piece of scrap wood Prepare your pie...
By: Mark Montano

Continue Reading »]]>
Wed, 12 Nov 2014 09:23:24 PST
Voodoo Heart | Pulsating Glow Quartz Necklace http://www.instructables.com/id/Voodoo-Heart-Glowing-Quartz-Necklace/
Voodoo Heart | Pulsating Glow Quartz Necklace - More DIY How To Projects]]> http://cdn.instructables.com/F92/UZNB/I2CV6LST/F92UZNBI2CV6LST.SQUARE2.jpg http://cdn.instructables.com/F92/UZNB/I2CV6LST/F92UZNBI2CV6LST.SQUARE.jpg http://cdn.instructables.com/F92/UZNB/I2CV6LST/F92UZNBI2CV6LST.SMALL.gif ◄ Fudog ► Living in Lousiana, I am very interested in the voodoo culture. This necklace is an inspiration of it. Voodoo Heart slowly glows with a purple light... Its magical attribute you may ask ? Turns heads everywhere you go and sparks a conversation ;) Materials & Tools QuartzLeather & Suede Lace C...
By: ◄ Fudog ►

Continue Reading »]]>
Mon, 10 Nov 2014 15:53:34 PST
Jewelry holder + perfume shelf http://www.instructables.com/id/Jewelry-holder-perfume-shelf/
Jewelry holder + perfume shelf - More DIY How To Projects]]> http://cdn.instructables.com/FLB/STNP/I2AR1FWJ/FLBSTNPI2AR1FWJ.SQUARE2.jpg http://cdn.instructables.com/FLB/STNP/I2AR1FWJ/FLBSTNPI2AR1FWJ.SQUARE.jpg http://cdn.instructables.com/FLB/STNP/I2AR1FWJ/FLBSTNPI2AR1FWJ.SMALL.jpg nupharhall For this project I wanted to prove that a person can make a beautiful design from very simple craft objects.I wanted to create something for all of you Instructables , that was easy to make and looks very product like in the end.I hope you like it!It is a jewelry + perfume shelf, made out of cardboa...
By: nupharhall

Continue Reading »]]>
Mon, 10 Nov 2014 00:17:00 PST
Doctor Who Bow Necklace http://www.instructables.com/id/Doctor-Who-Bow-Necklace/
Doctor Who Bow Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FZF/O6VH/I26N5SN9/FZFO6VHI26N5SN9.SQUARE2.jpg http://cdn.instructables.com/FZF/O6VH/I26N5SN9/FZFO6VHI26N5SN9.SQUARE.jpg http://cdn.instructables.com/FZF/O6VH/I26N5SN9/FZFO6VHI26N5SN9.SMALL.jpg MsSweetSatisfaction Yup I like Doctor Who, is anyone shocked? My first Doctor was Christopher Eccleston and although he will always have a special place in my heart my favorite Doctor is Matt Smith. I just loved his quirkiness, and I really liked the relationship between him and Rory and Amy. Therefore this week I d...
By: MsSweetSatisfaction

Continue Reading »]]>
Fri, 7 Nov 2014 14:06:54 PST
Leather Ring http://www.instructables.com/id/Leather-Ring-1/
Leather Ring - More DIY How To Projects]]> http://cdn.instructables.com/FG5/F0IB/I24LXIXN/FG5F0IBI24LXIXN.SQUARE2.jpg http://cdn.instructables.com/FG5/F0IB/I24LXIXN/FG5F0IBI24LXIXN.SQUARE.jpg http://cdn.instructables.com/FG5/F0IB/I24LXIXN/FG5F0IBI24LXIXN.SMALL.jpg inspiretomake This simple but cool leather ring you can make in 5 minutes. Get some leather scraps. Get some Leather scraps. You can get your leather from an old shoes, wallet, leather belt, jacket or a leather couch =) Cut and punch. Cut a strip or leather for a future ring. Wrap it around your finger to c...
By: inspiretomake

Continue Reading »]]>
Wed, 5 Nov 2014 09:50:49 PST
Make A Chunky Wooden Ring http://www.instructables.com/id/Make-your-own-wooden-ring/
Make A Chunky Wooden Ring - More DIY How To Projects]]> http://cdn.instructables.com/FUN/4ANA/I236VZ89/FUN4ANAI236VZ89.SQUARE2.jpg http://cdn.instructables.com/FUN/4ANA/I236VZ89/FUN4ANAI236VZ89.SQUARE.jpg http://cdn.instructables.com/FUN/4ANA/I236VZ89/FUN4ANAI236VZ89.SMALL.jpg KirstieLynn I have a sort of crazy obsession for ring making, and I thought it would be a good idea to make a tutorial to show others how to make wooden rings too.Things you'll need: Wood Drill Press or Hand Drill Band Saw Sanding tools (Foredom or dremmel, Belt sander, sand paper) Forstner Bit Cutting board oi...
By: KirstieLynn

Continue Reading »]]>
Wed, 5 Nov 2014 18:09:45 PST
DIY Wire & Seed-Bead Bracelet http://www.instructables.com/id/Wire-Seed-Bead-Bracelet/
DIY Wire & Seed-Bead Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/FMD/OX7N/I395SFK9/FMDOX7NI395SFK9.SQUARE2.jpg http://cdn.instructables.com/FMD/OX7N/I395SFK9/FMDOX7NI395SFK9.SQUARE.jpg http://cdn.instructables.com/FMD/OX7N/I395SFK9/FMDOX7NI395SFK9.SMALL.jpg Muhaiminah Faiz There's nothing much to say... I was in class, doodling and randomly came up with the idea of making this bracelet. I made the bracelet in my head (like I always do!) and made 1 as soon as I came home. It was so easy to make, turned out pretty nice so I had to share the tutorial.Anyways, grab the ma...
By: Muhaiminah Faiz

Continue Reading »]]>
Thu, 30 Oct 2014 07:36:12 PDT
Golden Snitch Necklace http://www.instructables.com/id/DIY-Golden-Snitch-Necklace/
Golden Snitch Necklace - More DIY How To Projects]]> http://cdn.instructables.com/F0E/3JE1/I1NUL05I/F0E3JE1I1NUL05I.SQUARE2.jpg http://cdn.instructables.com/F0E/3JE1/I1NUL05I/F0E3JE1I1NUL05I.SQUARE.jpg http://cdn.instructables.com/F0E/3JE1/I1NUL05I/F0E3JE1I1NUL05I.SMALL.jpg emilyvanleemput When I was thinking of what I could make, I first googled images of 'TARDIS siege mode' . What has that to do with this golden snitch necklace, you might ask. Well, nothing actually. But, once I decided I would be saving that project for later, I started thinking of something else. Still looking at ...
By: emilyvanleemput

Continue Reading »]]>
Sat, 25 Oct 2014 03:29:48 PDT
Hardware Store Steel and Copper Bracelet http://www.instructables.com/id/Hardware-Store-Steel-and-Copper-Bracelet/
Hardware Store Steel and Copper Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/FSP/6W7Z/I1MQ5Z8L/FSP6W7ZI1MQ5Z8L.SQUARE2.jpg http://cdn.instructables.com/FSP/6W7Z/I1MQ5Z8L/FSP6W7ZI1MQ5Z8L.SQUARE.jpg http://cdn.instructables.com/FSP/6W7Z/I1MQ5Z8L/FSP6W7ZI1MQ5Z8L.SMALL.jpg DIYdavis Needed:Steel tie wireRomex copper wire Get Wire Cut two pieces of tie wire 25" long, and one piece of copper romex wire 25" long, both available at the hardware store. You will need to use wire strippers and/or a knife (careful) to strip off the insulation. Or you can just use the already bare gr...
By: DIYdavis

Continue Reading »]]>
Thu, 23 Oct 2014 22:29:42 PDT
Cool Boho Style Leather Bracelet http://www.instructables.com/id/Cool-Boho-Style-Leather-Bracelet/
Cool Boho Style Leather Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/FDI/FVY4/I1ILGX30/FDIFVY4I1ILGX30.SQUARE2.jpg http://cdn.instructables.com/FDI/FVY4/I1ILGX30/FDIFVY4I1ILGX30.SQUARE.jpg http://cdn.instructables.com/FDI/FVY4/I1ILGX30/FDIFVY4I1ILGX30.SMALL.jpg DasiyD Here, you’ll learn to make a bracelet in popular bohemian style. I put today's theme on making a cool leather bracelets with bronze chains and wood beads, for a variant boho style. Hope you will love it! Supplies needed for making the cool leather bracelets: Oval Wood BeadsRound Wood Beads Tibeta...
By: DasiyD

Continue Reading »]]>
Mon, 20 Oct 2014 20:39:14 PDT
3d printed necklace http://www.instructables.com/id/3d-printed-jewelry/
3d printed necklace - More DIY How To Projects]]> http://cdn.instructables.com/FHD/WP44/I1FQ6IBJ/FHDWP44I1FQ6IBJ.SQUARE2.jpg http://cdn.instructables.com/FHD/WP44/I1FQ6IBJ/FHDWP44I1FQ6IBJ.SQUARE.jpg http://cdn.instructables.com/FHD/WP44/I1FQ6IBJ/FHDWP44I1FQ6IBJ.SMALL.jpg smithallen_studio Everyone loves jewelry. And 3d printing. Traditionally, jewelry has been made with aged processes like lost wax casting and soldering. But, digital fabrication, from 3d printing to laser cutting, unlocks a new world of possibilities for jewelry, a realm of digital craft. You can prototype and iterat...
By: smithallen_studio

Continue Reading »]]>
Tue, 29 Jul 2014 10:17:04 PDT
Leather wrapped brass jewelry http://www.instructables.com/id/Leather-wrapped-brass-jewelry/
Leather wrapped brass jewelry - More DIY How To Projects]]> http://cdn.instructables.com/FA1/7T5L/I1KJKRPQ/FA17T5LI1KJKRPQ.SQUARE2.jpg http://cdn.instructables.com/FA1/7T5L/I1KJKRPQ/FA17T5LI1KJKRPQ.SQUARE.jpg http://cdn.instructables.com/FA1/7T5L/I1KJKRPQ/FA17T5LI1KJKRPQ.SMALL.jpg asergeeva An internet browsing black hole led me to the Crescioni - a beautiful collection of leather wrapped brass jewelry inspired by the spirit of the American west. I love the mix of natural fibers with metal, and I've done various jewelry and leather projects so this collection inspired me to combine the...
By: asergeeva

Continue Reading »]]>
Mon, 20 Oct 2014 08:32:41 PDT
Steampunk Collage Necklace http://www.instructables.com/id/Steampunk-Collage-Necklace/
Steampunk Collage Necklace - More DIY How To Projects]]> http://cdn.instructables.com/FLG/ERAF/I1C3Z0E8/FLGERAFI1C3Z0E8.SQUARE2.jpg http://cdn.instructables.com/FLG/ERAF/I1C3Z0E8/FLGERAFI1C3Z0E8.SQUARE.jpg http://cdn.instructables.com/FLG/ERAF/I1C3Z0E8/FLGERAFI1C3Z0E8.SMALL.jpg Ivoryaria This steampunk inspired necklace can spice up any outfit, and it is fun to easy to make!What you need:1. Flat nose pliers, round nose pliers, and wire cutters2. chain, ( as long as you want it, but with room to add charms to each link)3. ribbon to make the necklace. 4. charms, beads, eye pis, head ...
By: Ivoryaria

Continue Reading »]]>
Thu, 16 Oct 2014 22:10:20 PDT
How to Make Ombre Crystal Cluster Earrings http://www.instructables.com/id/How-to-Make-Ombre-Crystal-Cluster-Earrings/
How to Make Ombre Crystal Cluster Earrings - More DIY How To Projects]]> http://cdn.instructables.com/FI0/XLHR/I1B64REV/FI0XLHRI1B64REV.SQUARE2.jpg http://cdn.instructables.com/FI0/XLHR/I1B64REV/FI0XLHRI1B64REV.SQUARE.jpg http://cdn.instructables.com/FI0/XLHR/I1B64REV/FI0XLHRI1B64REV.SMALL.jpg DasiyD Are you ready for making this couple of ombre crystal cluster earrings? It is so diverting to make ombre earrings and also very fit for autumn season. Follow me! Materials on how to make crystal earrings: 4mm acrylic plating golden beads6mm clear crystal beads6mm light yellow crystal beads6mm gol...
By: DasiyD

Continue Reading »]]>
Wed, 15 Oct 2014 17:53:34 PDT
Bullet Studded Leather Cuff http://www.instructables.com/id/Bullet-Studded-Leather-Cuff/
Bullet Studded Leather Cuff - More DIY How To Projects]]> http://cdn.instructables.com/FKH/E3YW/I19472OF/FKHE3YWI19472OF.SQUARE2.jpg http://cdn.instructables.com/FKH/E3YW/I19472OF/FKHE3YWI19472OF.SQUARE.jpg http://cdn.instructables.com/FKH/E3YW/I19472OF/FKHE3YWI19472OF.SMALL.jpg Mrballeng I made this bracelet from leather, bullet shells, and copper wire. I used tools normally for bullet reloading and also borrowed some scrapbooking supplies from my wife. Special thanks to my friend Jeff for modeling against his 72' Chevy Nova. The video embed doesn't seem to be working right now but ...
By: Mrballeng

Continue Reading »]]>
Wed, 15 Oct 2014 09:10:09 PDT
Zipper and Felt Charms http://www.instructables.com/id/Zipper-and-Felt-Charms/
Zipper and Felt Charms - More DIY How To Projects]]> http://cdn.instructables.com/F77/AJHO/I13EBTFM/F77AJHOI13EBTFM.SQUARE2.jpg http://cdn.instructables.com/F77/AJHO/I13EBTFM/F77AJHOI13EBTFM.SQUARE.jpg http://cdn.instructables.com/F77/AJHO/I13EBTFM/F77AJHOI13EBTFM.SMALL.jpg shazni Zippers rock you say? I totally agree! These zipper trims jazz up these lovely charms. Brooches, Pendants, earrings, whatever they are they look amazing when zippers are added :-)R-I-H-A-M does a wonderful tutorial using zippers and polymer clay. I have seen something like that done with felt and ...
By: shazni

Continue Reading »]]>
Fri, 10 Oct 2014 20:55:29 PDT
How To Make A Phone Wire Bracelet http://www.instructables.com/id/How-To-Make-A-Phone-Wire-Bracelet/
How To Make A Phone Wire Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/FZ7/9C9G/I11YUQ8V/FZ79C9GI11YUQ8V.SQUARE2.jpg http://cdn.instructables.com/FZ7/9C9G/I11YUQ8V/FZ79C9GI11YUQ8V.SQUARE.jpg http://cdn.instructables.com/FZ7/9C9G/I11YUQ8V/FZ79C9GI11YUQ8V.SMALL.jpg kludge77 These wires are from a 25 pair telephone cable that was discarded at the office. It just didn't seem right to toss them!I after pouring 15 ounces of epoxy I drilled a hole (the epoxy harden in about 5 hours ) for the inside diameter a 2 5/8"After a quick turning to a smooth cylinder, I started ...
By: kludge77

Continue Reading »]]>
Thu, 9 Oct 2014 11:16:55 PDT
Fancy Leather (Feather) Earrings http://www.instructables.com/id/Fancy-Leather-Feather-Earrings/
Fancy Leather (Feather) Earrings - More DIY How To Projects]]> http://cdn.instructables.com/F99/3V87/I0YG4RVT/F993V87I0YG4RVT.SQUARE2.jpg http://cdn.instructables.com/F99/3V87/I0YG4RVT/F993V87I0YG4RVT.SQUARE.jpg http://cdn.instructables.com/F99/3V87/I0YG4RVT/F993V87I0YG4RVT.SMALL.jpg Bhawya Handmade leather earrings are cute and fancy. you can make earrings in different color leather scrap with different patterns. I love feather earrings so I made a pair of leather feather earring and some simple fancy earrings. To make these Pretty earrings, you will need leather scrap in any color, f...
By: Bhawya

Continue Reading »]]>
Wed, 8 Oct 2014 09:09:00 PDT
Autumn DIY: Make Orange Flower Hair Clip http://www.instructables.com/id/Autumn-DIY-Make-Orange-Flower-Hair-Clip/
Autumn DIY: Make Orange Flower Hair Clip - More DIY How To Projects]]> http://cdn.instructables.com/F19/24FB/I0TVMSAB/F1924FBI0TVMSAB.SQUARE2.jpg http://cdn.instructables.com/F19/24FB/I0TVMSAB/F1924FBI0TVMSAB.SQUARE.jpg http://cdn.instructables.com/F19/24FB/I0TVMSAB/F1924FBI0TVMSAB.SMALL.jpg DasiyD Beaded hair clip for autumn! I use orange seed beads, white pearl and copper wire to DIY flower hair clips, it is so easy and you can make one for your girls, so follow me to learn how to make flower hair clip. Materials on making flower hair clips 3mm orange seed beads6mm white pearl beads5mm co...
By: DasiyD

Continue Reading »]]>
Mon, 6 Oct 2014 20:30:57 PDT