Instructables: exploring - stepbystep - props - featured http://www.instructables.com Fri, 29 May 2015 09:39:09 PDT BLOX v1.01 Make a unique quicksilver mask moulded from your face http://www.instructables.com/id/Make-a-unique-quicksilver-mask-moulded-from-your-f/
Make a unique quicksilver mask moulded from your face - More DIY How To Projects]]> http://cdn.instructables.com/FYV/HU9E/IA81RSOC/FYVHU9EIA81RSOC.SQUARE2.jpg http://cdn.instructables.com/FYV/HU9E/IA81RSOC/FYVHU9EIA81RSOC.SQUARE.jpg http://cdn.instructables.com/FYV/HU9E/IA81RSOC/FYVHU9EIA81RSOC.SMALL.jpg jemgillam Instamorph is a low temerature thermoset plastic, which melts at only 60°C / 140°F. This makes it particularly suitable for moulding with your hands, even to the extent that you can mould a mask to your own face before the plastic sets! Melt your Instamorph Materials you will need... A packet of ...
By: jemgillam

Continue Reading »]]>
Thu, 28 May 2015 13:13:45 PDT
How to make Zelda's Bow http://www.instructables.com/id/How-to-make-Zeldas-Bow/
How to make Zelda's Bow - More DIY How To Projects]]> http://cdn.instructables.com/FRV/9Y5U/IA5IVG9W/FRV9Y5UIA5IVG9W.SQUARE2.jpg http://cdn.instructables.com/FRV/9Y5U/IA5IVG9W/FRV9Y5UIA5IVG9W.SQUARE.jpg http://cdn.instructables.com/FRV/9Y5U/IA5IVG9W/FRV9Y5UIA5IVG9W.SMALL.jpg esseff3d My wife and I are working on creating Zelda and Link costumes for cosplay. In my opinion, the coolest weapon that Zelda uses is the bow that she has in Twilight Princess and Super Smash Bros.All of the versions of Zelda's bow that I was finding online were either painted or used reflective tape to g...
By: esseff3d

Continue Reading »]]>
Tue, 26 May 2015 18:32:36 PDT
How to heat Instamorph in an oven for reuse. http://www.instructables.com/id/How-to-heat-Instamorph-in-an-oven-for-reuse/
How to heat Instamorph in an oven for reuse. - More DIY How To Projects]]> http://cdn.instructables.com/FVG/O7VM/IA3YSY7N/FVGO7VMIA3YSY7N.SQUARE2.jpg http://cdn.instructables.com/FVG/O7VM/IA3YSY7N/FVGO7VMIA3YSY7N.SQUARE.jpg http://cdn.instructables.com/FVG/O7VM/IA3YSY7N/FVGO7VMIA3YSY7N.SMALL.jpg jemgillam Instamorph is an non-toxic, lightweight polyester thermoplastic which can be heated in hot water and can be moulded like clay to produce many different items. When purchased, Instamorph comes in pellet form and can be poured into hot water (60°C / 140°F) to melt. Instamorph is also reusable, so you ...
By: jemgillam

Continue Reading »]]>
Tue, 26 May 2015 04:58:48 PDT
K-9 from Doctor Who http://www.instructables.com/id/K-9-from-Doctor-Who/
K-9 from Doctor Who - More DIY How To Projects]]> http://cdn.instructables.com/FK0/DNEQ/I9IBM77R/FK0DNEQI9IBM77R.SQUARE2.jpg http://cdn.instructables.com/FK0/DNEQ/I9IBM77R/FK0DNEQI9IBM77R.SQUARE.jpg http://cdn.instructables.com/FK0/DNEQ/I9IBM77R/FK0DNEQI9IBM77R.SMALL.jpg trip janzen I have wanted to have my own K-9 from Dr. Who since I first saw him on TV back in the 80's. Now that I can, I decided to build one as part of my costume for the Emerald City Comicon in Seattle. I made the decision in January and K-9 needed to be done for the end of March. What follows is a mostly p...
By: trip janzen

Continue Reading »]]>
Sun, 10 May 2015 03:36:42 PDT
bone sculptures http://www.instructables.com/id/bone-sculptures/
bone sculptures - More DIY How To Projects]]> http://cdn.instructables.com/FMB/H2YZ/I9EOU6U4/FMBH2YZI9EOU6U4.SQUARE2.jpg http://cdn.instructables.com/FMB/H2YZ/I9EOU6U4/FMBH2YZI9EOU6U4.SQUARE.jpg http://cdn.instructables.com/FMB/H2YZ/I9EOU6U4/FMBH2YZI9EOU6U4.SMALL.jpg rodgerbooth I've had a couple of you say you would like to see how I make my bone sculptures so I'm going to give it a shot things you might need there are a few things that you might need are relatively inexpensive and you don't necessarily need them but you might1. drill corded or cordless (I use both) and...
By: rodgerbooth

Continue Reading »]]>
Thu, 7 May 2015 16:59:36 PDT
Borderlands Psycho Glow in the Dark Earrings http://www.instructables.com/id/Borderlands-Psycho-Glow-in-the-Dark-Earrings/
Borderlands Psycho Glow in the Dark Earrings - More DIY How To Projects]]> http://cdn.instructables.com/F7R/PN1J/I92LVLWH/F7RPN1JI92LVLWH.SQUARE2.jpg http://cdn.instructables.com/F7R/PN1J/I92LVLWH/F7RPN1JI92LVLWH.SQUARE.jpg http://cdn.instructables.com/F7R/PN1J/I92LVLWH/F7RPN1JI92LVLWH.SMALL.jpg Steven K Smith Props Hey everyone SKS Props here with another build!!Ok, so I am getting to be pretty well known throughout the cosplay community for making full size props / replicas of famous video game characters. Taking this into consideration I really wanted to start pushing more into other markets and I though ga...
By: Steven K Smith Props

Continue Reading »]]>
Wed, 29 Apr 2015 20:23:00 PDT
How to make a Borderlands: "Boom Puppy" Gun http://www.instructables.com/id/Borderlands-Boom-Puppy-Gun/
How to make a Borderlands: "Boom Puppy" Gun - More DIY How To Projects]]> http://cdn.instructables.com/FOG/RV2A/I92LTKWB/FOGRV2AI92LTKWB.SQUARE2.jpg http://cdn.instructables.com/FOG/RV2A/I92LTKWB/FOGRV2AI92LTKWB.SQUARE.jpg http://cdn.instructables.com/FOG/RV2A/I92LTKWB/FOGRV2AI92LTKWB.SMALL.jpg SpicyPandaCreations Like Borderlands the game? like the characters? like the guns?!?!?Well, i'm here to show you how to make a Boom Puppy. A friend had asked me to create a boom puppy for the Chicago Comic and Entertainment Expo 2015. How could I turn down a challenge?So let's begin!Materials:-cardboard-hot glue sticks...
By: SpicyPandaCreations

Continue Reading »]]>
Wed, 29 Apr 2015 12:12:01 PDT
Skyrim mead prop http://www.instructables.com/id/Skyrim-mead-prop/
Skyrim mead prop - More DIY How To Projects]]> http://cdn.instructables.com/FCS/NON7/I92LS7HX/FCSNON7I92LS7HX.SQUARE2.jpg http://cdn.instructables.com/FCS/NON7/I92LS7HX/FCSNON7I92LS7HX.SQUARE.jpg http://cdn.instructables.com/FCS/NON7/I92LS7HX/FCSNON7I92LS7HX.SMALL.jpg Lionclaw0612 I'm going to show you how to make own own skyrim mead prop. It's not real alcohol it's intended for decoration purposes. I'll show you how to make Honningbrew and Black Briar mead.Step 1: Find or buy suitable bottles, you can look at images of skyrim's mead on google for reference. I bought one bott...
By: Lionclaw0612

Continue Reading »]]>
Wed, 29 Apr 2015 04:45:23 PDT
How to Make a Writing Quill http://www.instructables.com/id/How-to-Make-a-Writing-Quill/
How to Make a Writing Quill - More DIY How To Projects]]> http://cdn.instructables.com/F77/WPMJ/I916E39O/F77WPMJI916E39O.SQUARE2.jpg http://cdn.instructables.com/F77/WPMJ/I916E39O/F77WPMJI916E39O.SQUARE.jpg http://cdn.instructables.com/F77/WPMJ/I916E39O/F77WPMJI916E39O.SMALL.jpg StJost For more than a thousand years, the feather quill was the dominant writing utensil of the Western world. There are many artists, prop-makers, and enthusiasts today who still use quills and have learned to create their own. The process isn't difficult; it does, however, require a bit of practice to p...
By: StJost

Continue Reading »]]>
Tue, 28 Apr 2015 12:02:51 PDT
Superhero Wall Decor http://www.instructables.com/id/Superhero-Wall-Decor/
Superhero Wall Decor - More DIY How To Projects]]> http://cdn.instructables.com/F43/83FF/I8OBFQE8/F4383FFI8OBFQE8.SQUARE2.jpg http://cdn.instructables.com/F43/83FF/I8OBFQE8/F4383FFI8OBFQE8.SQUARE.jpg http://cdn.instructables.com/F43/83FF/I8OBFQE8/F4383FFI8OBFQE8.SMALL.jpg iampete1 SuppliesFoam: 3mm, 4mm, 5mm, 6mm will work. (I have even used a 2mm for the yellow Batman symbol to glue on a 5mm piece) Xacto knife(or any kind of sharp blade, be careful not to cut yourself)Printer(obviously)Card-stock to print emblem onImage of your choosing. (Google logos, emblems)Paint of your...
By: iampete1

Continue Reading »]]>
Sun, 19 Apr 2015 14:11:23 PDT
Luke Skywalkers Lightsaber (Episode VI) - FDM/FFF 3D Printable http://www.instructables.com/id/Luke-Skywalkers-Lightsaber-Episode-VI-FDMFFF-3D-Pr/
Luke Skywalkers Lightsaber (Episode VI) - FDM/FFF 3D Printable - More DIY How To Projects]]> http://cdn.instructables.com/F4D/ZLX6/I84GZKX0/F4DZLX6I84GZKX0.SQUARE2.jpg http://cdn.instructables.com/F4D/ZLX6/I84GZKX0/F4DZLX6I84GZKX0.SQUARE.jpg http://cdn.instructables.com/F4D/ZLX6/I84GZKX0/F4DZLX6I84GZKX0.SMALL.jpg James___UK I made this because I was frustrated with the number of models that were only printable with an SLS or SLA printer which most home printers are not. I also just wanted to print this old lightsaber model I did. This is a 2nd iteration with bigger/better threads Print the lightsaber I've uploaded a...
By: James___UK

Continue Reading »]]>
Sun, 5 Apr 2015 07:14:44 PDT
Harry Potter Wand Stand http://www.instructables.com/id/Harry-Potter-Wand-Stand/
Harry Potter Wand Stand - More DIY How To Projects]]> http://cdn.instructables.com/FR9/9CX8/I7IVORP9/FR99CX8I7IVORP9.SQUARE2.jpg http://cdn.instructables.com/FR9/9CX8/I7IVORP9/FR99CX8I7IVORP9.SQUARE.jpg http://cdn.instructables.com/FR9/9CX8/I7IVORP9/FR99CX8I7IVORP9.SMALL.jpg shirwoo My husband and I took my son to Universal Studios to the Wizarding World of Harry Potter. He had an awesome time and bought 4 wizarding wands. He didn't understand WHY they didn't sell a wand stand like in their display so we decided to make one.You will need:3/4" plywood about 14" x 14" or at leas...
By: shirwoo

Continue Reading »]]>
Sat, 21 Mar 2015 16:08:16 PDT
Make a Breakaway Prop Statue for Film or Theatre http://www.instructables.com/id/Make-a-Breakaway-Prop-Statue-for-Film-or-Theatre/
Make a Breakaway Prop Statue for Film or Theatre - More DIY How To Projects]]> http://cdn.instructables.com/FCI/E5H0/I6DHZR8J/FCIE5H0I6DHZR8J.SQUARE2.jpg http://cdn.instructables.com/FCI/E5H0/I6DHZR8J/FCIE5H0I6DHZR8J.SQUARE.jpg http://cdn.instructables.com/FCI/E5H0/I6DHZR8J/FCIE5H0I6DHZR8J.SMALL.jpg damianzuch Hallo you! Thanks for checking this build out! My partner and I make props and have been working on a number of different hidden camera prank shows for the last few years. This breakaway statue was for a show where they pranked high school students. The students thought they were presenting a statue...
By: damianzuch

Continue Reading »]]>
Fri, 20 Feb 2015 09:28:38 PST
Chasing Marquee Sign http://www.instructables.com/id/Chasing-Marquee-Sign/
Chasing Marquee Sign - More DIY How To Projects]]> http://cdn.instructables.com/FHS/KB9N/I5THXAOV/FHSKB9NI5THXAOV.SQUARE2.jpg http://cdn.instructables.com/FHS/KB9N/I5THXAOV/FHSKB9NI5THXAOV.SQUARE.jpg http://cdn.instructables.com/FHS/KB9N/I5THXAOV/FHSKB9NI5THXAOV.SMALL.jpg RaniaPeet Hi and welcome to my Chasing Marquee sign Instructable! This sign was originally created for a Halloween event but the general design can be carried over into any theme. The sign itself is made of wood & extruded polystyrene foam board with lighting from Novelty Lights.Ok let's get started. Materi...
By: RaniaPeet

Continue Reading »]]>
Sat, 7 Feb 2015 09:38:10 PST
Adventure Time Candy People http://www.instructables.com/id/Adventure-Time-Candy-People/
Adventure Time Candy People - More DIY How To Projects]]> http://cdn.instructables.com/FXH/ER9F/I5J5548V/FXHER9FI5J5548V.SQUARE2.jpg http://cdn.instructables.com/FXH/ER9F/I5J5548V/FXHER9FI5J5548V.SQUARE.jpg http://cdn.instructables.com/FXH/ER9F/I5J5548V/FXHER9FI5J5548V.SMALL.jpg RaniaPeet I was hired to decorate an Adventure Time themed event with Candy Kingdom being one of the main attractions. I decided to build 28 custom 3 dimensional candy people in total as well as Cotton Candy Trees and a 22ft Lady Rainicorn (Instructable coming soon). The candy people are made from foam blocks...
By: RaniaPeet

Continue Reading »]]>
Fri, 30 Jan 2015 10:59:54 PST
Life Size Lady Rainicorn http://www.instructables.com/id/Life-Size-Lady-Rainicorn/
Life Size Lady Rainicorn - More DIY How To Projects]]> http://cdn.instructables.com/F8P/JPYX/I5MD5EMZ/F8PJPYXI5MD5EMZ.SQUARE2.jpg http://cdn.instructables.com/F8P/JPYX/I5MD5EMZ/F8PJPYXI5MD5EMZ.SQUARE.jpg http://cdn.instructables.com/F8P/JPYX/I5MD5EMZ/F8PJPYXI5MD5EMZ.SMALL.jpg RaniaPeet If you have clicked on this Instructable, than you are clearly aware of who Lady Rainicorn is. If not, well she is a flying, Korean speaking, rainbow unicorn character from the cartoon, Adventure Time. I was hired to decorate an Adventure Time themed event so I came up with the ridiculous idea to ma...
By: RaniaPeet

Continue Reading »]]>
Mon, 2 Feb 2015 17:41:48 PST
Cotton Candy L.E.D Clouds http://www.instructables.com/id/Cotton-Candy-LED-Clouds/
Cotton Candy L.E.D Clouds - More DIY How To Projects]]> http://cdn.instructables.com/F0I/UJ6R/I5DSSQ3S/F0IUJ6RI5DSSQ3S.SQUARE2.jpg http://cdn.instructables.com/F0I/UJ6R/I5DSSQ3S/F0IUJ6RI5DSSQ3S.SQUARE.jpg http://cdn.instructables.com/F0I/UJ6R/I5DSSQ3S/F0IUJ6RI5DSSQ3S.SMALL.jpg RaniaPeet These are very simple and somewhat easy to make if you can handle working with chicken wire. The end result is nothing short of magical and they can be used in everything from special events to home decor. Materials Materials needed:1" Chicken wirePolyfil cotton bulk 25lb boxSpray Paint Rustoleu...
By: RaniaPeet

Continue Reading »]]>
Wed, 28 Jan 2015 18:37:19 PST
Giant Mushrooms http://www.instructables.com/id/Giant-Mushrooms/
Giant Mushrooms - More DIY How To Projects]]> http://cdn.instructables.com/FBQ/KWIT/I5DSHTS0/FBQKWITI5DSHTS0.SQUARE2.jpg http://cdn.instructables.com/FBQ/KWIT/I5DSHTS0/FBQKWITI5DSHTS0.SQUARE.jpg http://cdn.instructables.com/FBQ/KWIT/I5DSHTS0/FBQKWITI5DSHTS0.SMALL.jpg RaniaPeet I built these mushrooms originally for my annual Halloween haunted yard. They can be used in a variety of ways though - for Alice in Wonderland themes, Dr. Suess themes, weddings, theater, festivals, garden parties and more. These giant mushrooms range in size from 5ft tall to 10ft tall. They are ma...
By: RaniaPeet

Continue Reading »]]>
Tue, 27 Jan 2015 15:56:33 PST
Faux Fantasy Door http://www.instructables.com/id/Faux-Fantasy-Door/
Faux Fantasy Door - More DIY How To Projects]]> http://cdn.instructables.com/FXT/V65W/I5DSVIY1/FXTV65WI5DSVIY1.SQUARE2.jpg http://cdn.instructables.com/FXT/V65W/I5DSVIY1/FXTV65WI5DSVIY1.SQUARE.jpg http://cdn.instructables.com/FXT/V65W/I5DSVIY1/FXTV65WI5DSVIY1.SMALL.jpg The Juliart For fairy or sprite? (This door is just right!)If Whimsy is what you seek then follow me and take a peek!I don't know about you, but fantasy makes reality bearable. No matter what, fantasy you like, a doorway always plays a special roll, a porthole to another dimension, a gateway to magical place....
By: The Juliart

Continue Reading »]]>
Mon, 26 Jan 2015 15:50:10 PST
Kids' Covered Wagon http://www.instructables.com/id/Kids-Covered-Wagon/
Kids' Covered Wagon - More DIY How To Projects]]> http://cdn.instructables.com/FD0/URKG/I48CCMXY/FD0URKGI48CCMXY.SQUARE2.jpg http://cdn.instructables.com/FD0/URKG/I48CCMXY/FD0URKGI48CCMXY.SQUARE.jpg http://cdn.instructables.com/FD0/URKG/I48CCMXY/FD0URKGI48CCMXY.SMALL.jpg stevebattle This Instructable turns a plain gardening cart into a kids' Covered Wagon. As well as for cowgirl/boy play, this comes in handy at festivals for transporting sleepy kids. What you will need A 'large garden cart' 37" x 20" can be bought on Amazon 3 x 1.5m lengths of 15mm speedfit plumbing pipe ...
By: stevebattle

Continue Reading »]]>
Mon, 29 Dec 2014 14:26:33 PST
Tardis Puzzle Box Night Light http://www.instructables.com/id/Tardis-Puzzle-Box-Night-Light/
Tardis Puzzle Box Night Light - More DIY How To Projects]]> http://cdn.instructables.com/F5L/IV7J/I3TICUHQ/F5LIV7JI3TICUHQ.SQUARE2.jpg http://cdn.instructables.com/F5L/IV7J/I3TICUHQ/F5LIV7JI3TICUHQ.SQUARE.jpg http://cdn.instructables.com/F5L/IV7J/I3TICUHQ/F5LIV7JI3TICUHQ.SMALL.jpg BrittLiv In this instructable I am going to show you, how to build a Tardis puzzle box, which can only be opened by sliding the roof panels in a certain way. I love building puzzle boxes and decided making this one for a huge Dr. Who fan. Thanks a lot to Ford and Instructables for sponsoring this instructab...
By: BrittLiv

Continue Reading »]]>
Sat, 27 Dec 2014 13:09:09 PST
Iron Merkin http://www.instructables.com/id/Iron-Merkin/
Iron Merkin - More DIY How To Projects]]> http://cdn.instructables.com/F00/5OY0/I3VH9E78/F005OY0I3VH9E78.SQUARE2.jpg http://cdn.instructables.com/F00/5OY0/I3VH9E78/F005OY0I3VH9E78.SQUARE.jpg http://cdn.instructables.com/F00/5OY0/I3VH9E78/F005OY0I3VH9E78.SMALL.jpg rachel Don't really know how to introduce this. It is an idea I had during a random Terrible Things discussion, and then I just had to make one. Alcohol was involved in the discussion, although not in the making.A merkin is a pubic hair wig. An Iron Maiden is a medieval torture device. The Iron Merkin ...
By: rachel

Continue Reading »]]>
Wed, 17 Dec 2014 11:49:52 PST
Custom Uncle owen and Aunt Beru Star Wars charred body figure. http://www.instructables.com/id/Custom-Uncle-owen-and-Aunt-Beru-Star-Wars-charred-/
Custom Uncle owen and Aunt Beru Star Wars charred body figure. - More DIY How To Projects]]> http://cdn.instructables.com/FWL/YG8V/I3PJNLGH/FWLYG8VI3PJNLGH.SQUARE2.jpg http://cdn.instructables.com/FWL/YG8V/I3PJNLGH/FWLYG8VI3PJNLGH.SQUARE.jpg http://cdn.instructables.com/FWL/YG8V/I3PJNLGH/FWLYG8VI3PJNLGH.SMALL.jpg backwards lamb As some of you reading this might know, I'm a little bit fond of the film franchise Star Wars., and so is my fiancée.We love the toys that were produced for the original films and have collected them i recent years (after my childhood collection went as dust to the wind in many house moves) i have b...
By: backwards lamb

Continue Reading »]]>
Mon, 15 Dec 2014 12:46:45 PST
Color Changing Larson Scanner http://www.instructables.com/id/Color-Changing-Larson-Scanner/
Color Changing Larson Scanner - More DIY How To Projects]]> http://cdn.instructables.com/F0Q/EN3O/I2XTTAXH/F0QEN3OI2XTTAXH.SQUARE2.jpg http://cdn.instructables.com/F0Q/EN3O/I2XTTAXH/F0QEN3OI2XTTAXH.SQUARE.jpg http://cdn.instructables.com/F0Q/EN3O/I2XTTAXH/F0QEN3OI2XTTAXH.SMALL.jpg laserline Video of scanner in action. Yes, I'm rotating through the colors manually. Who doesn’t love KITT, the superhero car from Night Rider? The one with the Glowing Bouncing lights of a Larson Scanner up front. That scanner was so cool, they even filmed a remake of the TV Show featuring it. Don...
By: laserline

Continue Reading »]]>
Wed, 26 Nov 2014 13:47:18 PST
Voldemort's wand http://www.instructables.com/id/Voldemorts-wand/
Voldemort's wand - More DIY How To Projects]]> http://cdn.instructables.com/FW7/8V5B/I2TFZPSI/FW78V5BI2TFZPSI.SQUARE2.jpg http://cdn.instructables.com/FW7/8V5B/I2TFZPSI/FW78V5BI2TFZPSI.SQUARE.jpg http://cdn.instructables.com/FW7/8V5B/I2TFZPSI/FW78V5BI2TFZPSI.SMALL.jpg _Cybertooth_ Follow these instructions to make your very own... Dark Lord wand. Items You will need:- Polymer clay- Sculpting tools- Microwave oven- Hot glue gun- X-acto knife- Chopsticks- White paper- Assorted paints Base Start off by gluing the paper on the chopstick and rolling the chopstick to make a v...
By: _Cybertooth_

Continue Reading »]]>
Sat, 22 Nov 2014 13:39:09 PST
Tauriel (The Hobbit) Elvish Daggers - Quick Wooden Cosplay Props http://www.instructables.com/id/Tauriel-The-Hobbit-Elvish-Daggers-Quick-Wooden-Cos/
Tauriel (The Hobbit) Elvish Daggers - Quick Wooden Cosplay Props - More DIY How To Projects]]> http://cdn.instructables.com/F5J/ZK4S/I2QU4VGG/F5JZK4SI2QU4VGG.SQUARE2.jpg http://cdn.instructables.com/F5J/ZK4S/I2QU4VGG/F5JZK4SI2QU4VGG.SQUARE.jpg http://cdn.instructables.com/F5J/ZK4S/I2QU4VGG/F5JZK4SI2QU4VGG.SMALL.jpg kylegilbert For Halloween, I made my daughter a Tauriel costume. Tauriel is the fighting elf in the Hobbit movies who has a set of deadly-looking daggers that she uses along with her bow when fighting off orcs.So, to score huge points with my daughter, I needed to quickly create a set of daggers that matched th...
By: kylegilbert

Continue Reading »]]>
Thu, 20 Nov 2014 22:11:24 PST
Glowing fire salts (skyrim) http://www.instructables.com/id/Glowing-fire-salts-skyrim/
Glowing fire salts (skyrim) - More DIY How To Projects]]> http://cdn.instructables.com/F7H/MTU0/I2LM5D6M/F7HMTU0I2LM5D6M.SQUARE2.jpg http://cdn.instructables.com/F7H/MTU0/I2LM5D6M/F7HMTU0I2LM5D6M.SQUARE.jpg http://cdn.instructables.com/F7H/MTU0/I2LM5D6M/F7HMTU0I2LM5D6M.SMALL.jpg Anubyss88 I have seen a bunch of how to's on making fire salts but I haven't seen any that actually glow. So I sat down and came up with one for all the fans and those who just want something to light the night. This is my first instructable so please let me know what you think. Things you will need insta...
By: Anubyss88

Continue Reading »]]>
Mon, 17 Nov 2014 15:18:46 PST
Rocketeer Cirrus X3 Rocketpack http://www.instructables.com/id/Rocketeer-Cirrus-X3-Rocketpack/
Rocketeer Cirrus X3 Rocketpack - More DIY How To Projects]]> http://cdn.instructables.com/F4K/NF2H/I2KSEERM/F4KNF2HI2KSEERM.SQUARE2.jpg http://cdn.instructables.com/F4K/NF2H/I2KSEERM/F4KNF2HI2KSEERM.SQUARE.jpg http://cdn.instructables.com/F4K/NF2H/I2KSEERM/F4KNF2HI2KSEERM.SMALL.jpg sradtke I've wanted a replica of the Cirrus X3 rocketpack from The Rocketeer forever. I finally decided to build one, from scratch. Everything made by me, by hand. This was also a cool project because I finally taught myself to mold and cast. This is the culmination of about 5 months work. The Rocket pack s...
By: sradtke

Continue Reading »]]>
Mon, 17 Nov 2014 09:02:43 PST
Easy Iron Man Repulsor http://www.instructables.com/id/Easy-Iron-Man-Repulsor-1/
Easy Iron Man Repulsor - More DIY How To Projects]]> http://cdn.instructables.com/F83/Z2XQ/I2KBRHQ1/F83Z2XQI2KBRHQ1.SQUARE2.jpg http://cdn.instructables.com/F83/Z2XQ/I2KBRHQ1/F83Z2XQI2KBRHQ1.SQUARE.jpg http://cdn.instructables.com/F83/Z2XQ/I2KBRHQ1/F83Z2XQI2KBRHQ1.SMALL.jpg P1XEL00 In this tutorial I will show you how to make an easy Iron Man repulsor from a recycled watch.Please like, vote follow and comment.#P1XEL00 Gather your supplies You will need:An old watchAn led and a flat batteryand something to disassemble your watch withred paint sand paper Disassemble Your w...
By: P1XEL00

Continue Reading »]]>
Sun, 16 Nov 2014 10:26:42 PST
Merida's Bow http://www.instructables.com/id/Meridas-Bow/
Merida's Bow - More DIY How To Projects]]> http://cdn.instructables.com/FKO/1HV1/I2I47BRU/FKO1HV1I2I47BRU.SQUARE2.jpg http://cdn.instructables.com/FKO/1HV1/I2I47BRU/FKO1HV1I2I47BRU.SQUARE.jpg http://cdn.instructables.com/FKO/1HV1/I2I47BRU/FKO1HV1I2I47BRU.SMALL.jpg Wastelander Props This was my project made for the November 2014 Cardiff Film and Comic Con. I used the traditional bow making techniques, with the only difference being a longer bow string to make it "Con-Safe" Forming the bow shape To form the bow I used two pieces of 4X2 and glued them together, once dried I sk...
By: Wastelander Props

Continue Reading »]]>
Sat, 15 Nov 2014 09:48:26 PST
Essential Star-Lord Props http://www.instructables.com/id/Essential-Star-Lord-Props/
Essential Star-Lord Props - More DIY How To Projects]]> http://cdn.instructables.com/F3O/V2DE/I2AQU3K7/F3OV2DEI2AQU3K7.SQUARE2.jpg http://cdn.instructables.com/F3O/V2DE/I2AQU3K7/F3OV2DEI2AQU3K7.SQUARE.jpg http://cdn.instructables.com/F3O/V2DE/I2AQU3K7/F3OV2DEI2AQU3K7.SMALL.jpg mchau2 With the epic success of Marvel Guardians of the galaxy, with key players of the guardians, each being well established and interesting semi-heroic criminal, it’s only natural to take them as your Halloween props ideas. I love the movie, best marvel movie for me, I am also crowned Star-Lord by my ve...
By: mchau2

Continue Reading »]]>
Sun, 9 Nov 2014 15:33:59 PST
Kryptonite (Glowing Crystals, Nerd Swag) http://www.instructables.com/id/Kryptonite-Glowing-Crystals-Nerd-Swag/
Kryptonite (Glowing Crystals, Nerd Swag) - More DIY How To Projects]]> http://cdn.instructables.com/F9J/QVTS/I28OKBE2/F9JQVTSI28OKBE2.SQUARE2.jpg http://cdn.instructables.com/F9J/QVTS/I28OKBE2/F9JQVTSI28OKBE2.SQUARE.jpg http://cdn.instructables.com/F9J/QVTS/I28OKBE2/F9JQVTSI28OKBE2.SMALL.jpg Beetlesmart This glowing crystal Kryptonite was a project for my son and nephew's high school Robotics team, CRyptonite Team 624 from Cinco Ranch High. (Team CRyptonite was originally named to combat a rival who uses the Superman logo). Robotics tournaments tend to have some excellent swag for the teams, and ...
By: Beetlesmart

Continue Reading »]]>
Sat, 8 Nov 2014 20:07:17 PST
How To Make A Tron Data Disc http://www.instructables.com/id/How-To-Make-A-Tron-Data-Disc/
How To Make A Tron Data Disc - More DIY How To Projects]]> http://cdn.instructables.com/F7F/SR5Z/I28W9B7C/F7FSR5ZI28W9B7C.SQUARE2.jpg http://cdn.instructables.com/F7F/SR5Z/I28W9B7C/F7FSR5ZI28W9B7C.SQUARE.jpg http://cdn.instructables.com/F7F/SR5Z/I28W9B7C/F7FSR5ZI28W9B7C.SMALL.jpg kludge77 So I bought 30 grams of blue glow in the dark powder. and decided to try my hand at a grown up Tron Data Disc. I got the idea from Mat Browns glow in the dark shelves. This is a 10" maple disc that I turned on the lathe and used a 1/8 inch bench chisel to cut the grooves. After that it was just a ma...
By: kludge77

Continue Reading »]]>
Sat, 8 Nov 2014 10:26:10 PST
Ruben's Tube Fire Scythe Engineering Project / Prop http://www.instructables.com/id/Rubens-Tube-Fire-Scythe-Engineering-Project-Prop/
Ruben's Tube Fire Scythe Engineering Project / Prop - More DIY How To Projects]]> http://cdn.instructables.com/FUJ/CNO6/I1WH8TD3/FUJCNO6I1WH8TD3.SQUARE2.jpg http://cdn.instructables.com/FUJ/CNO6/I1WH8TD3/FUJCNO6I1WH8TD3.SQUARE.jpg http://cdn.instructables.com/FUJ/CNO6/I1WH8TD3/FUJCNO6I1WH8TD3.SMALL.jpg Ikkalebob A Ruben's tube or simply fire tube is a set-up in which flames will become higher or lower according to the frequency of the sound entering the tube. Essentially, the flames act like an oscilloscope for the sound entering the tube.In this project I decided to replicate this effect except, in the spi...
By: Ikkalebob

Continue Reading »]]>
Thu, 30 Oct 2014 15:56:52 PDT
Carbonfiber Ironman & Spiderman mask (skinning/wrapping) http://www.instructables.com/id/Carbonfiber-Ironman-Spiderman-mask-skinningwrappin/
Carbonfiber Ironman & Spiderman mask (skinning/wrapping) - More DIY How To Projects]]> http://cdn.instructables.com/FVW/S697/I1U2TQ3W/FVWS697I1U2TQ3W.SQUARE2.jpg http://cdn.instructables.com/FVW/S697/I1U2TQ3W/FVWS697I1U2TQ3W.SQUARE.jpg http://cdn.instructables.com/FVW/S697/I1U2TQ3W/FVWS697I1U2TQ3W.SMALL.jpg matthieutje65 A picture is worth a 1000 words and a video is worth a 1000 pictures sowatch the full video tutorial or go down to see the written description step by step ;) Introduction information skinning with carbonfiberThe most important thing you need to know is that skinning parts is not a quick way of m...
By: matthieutje65

Continue Reading »]]>
Wed, 29 Oct 2014 09:59:50 PDT
Foam Prop M-358 Talon from Mass Effect http://www.instructables.com/id/Foam-Prop-M-358-Talon-from-Mass-Effect/
Foam Prop M-358 Talon from Mass Effect - More DIY How To Projects]]> http://cdn.instructables.com/FNX/UPB9/I1PH4WGO/FNXUPB9I1PH4WGO.SQUARE2.jpg http://cdn.instructables.com/FNX/UPB9/I1PH4WGO/FNXUPB9I1PH4WGO.SQUARE.jpg http://cdn.instructables.com/FNX/UPB9/I1PH4WGO/FNXUPB9I1PH4WGO.SMALL.jpg eidylon I recently did my first cosplay at New York Comic Con this year. I had several requests for a tutorial on how I did my foam prop that went with my costume.After hearing about how they were being very strict with props this year, I decided I wasn't going to risk bringing my wood-built Talon. I also...
By: eidylon

Continue Reading »]]>
Sun, 26 Oct 2014 23:05:17 PDT
How To Make a Ghost For Halloween http://www.instructables.com/id/How-To-Make-a-Ghost-For-Halloween/
How To Make a Ghost For Halloween - More DIY How To Projects]]> http://cdn.instructables.com/FZQ/SN3A/I1NUIVJW/FZQSN3AI1NUIVJW.SQUARE2.jpg http://cdn.instructables.com/FZQ/SN3A/I1NUIVJW/FZQSN3AI1NUIVJW.SQUARE.jpg http://cdn.instructables.com/FZQ/SN3A/I1NUIVJW/FZQSN3AI1NUIVJW.SMALL.jpg Nextraker One of the best times to get creative during the year is Halloween and If you're one of those people that like to make your own costumes and decorations. Then here's a little something you can do for that scary night... A GHOST!!!You'll need the following items which you can easily get anywhere.*Whi...
By: Nextraker

Continue Reading »]]>
Sat, 25 Oct 2014 06:58:35 PDT
Halloween Black Cat With Glowing Eyes http://www.instructables.com/id/Halloween-Black-Cat-With-Glowing-Eyes/
Halloween Black Cat With Glowing Eyes - More DIY How To Projects]]> http://cdn.instructables.com/FAU/7QPA/I1FPZ0WB/FAU7QPAI1FPZ0WB.SQUARE2.jpg http://cdn.instructables.com/FAU/7QPA/I1FPZ0WB/FAU7QPAI1FPZ0WB.SQUARE.jpg http://cdn.instructables.com/FAU/7QPA/I1FPZ0WB/FAU7QPAI1FPZ0WB.SMALL.jpg blipvert We have a plywood witch built a few years ago and decided to add a black cat with glowing eyes.(Looping is imperfect on Vimeo, sorry!) The Body The cat was cut out of 1" foam, covered with a cotton sheet and painted with waterproof paint then acrylics (see our Steampunk Gears instructable fo...
By: blipvert

Continue Reading »]]>
Sun, 19 Oct 2014 16:42:50 PDT
Thor's Mighty Odeon Hammer! http://www.instructables.com/id/Thors-Mighty-Odeon-Hammer/
Thor's Mighty Odeon Hammer! - More DIY How To Projects]]> http://cdn.instructables.com/FF3/1UM6/I0VOZ1L7/FF31UM6I0VOZ1L7.SQUARE2.jpg http://cdn.instructables.com/FF3/1UM6/I0VOZ1L7/FF31UM6I0VOZ1L7.SQUARE.jpg http://cdn.instructables.com/FF3/1UM6/I0VOZ1L7/FF31UM6I0VOZ1L7.SMALL.jpg doodlecraft Thor's Hammer! Don't you love Thor?The Hammer, known as Mjolnir...here's a tutorial on how to make your own!And just like the hero, Thor, you can summon lightning too!(If you have a child's imagination) Supply List: Here's the supply list: 18" to 20" PVC pipeFoamgray fabric (pillowcase in our ca...
By: doodlecraft

Continue Reading »]]>
Mon, 6 Oct 2014 18:07:28 PDT
DIY Wheatley From Playground Ball! http://www.instructables.com/id/DIY-Wheatley-From-Playground-Ball/
DIY Wheatley From Playground Ball! - More DIY How To Projects]]> http://cdn.instructables.com/FDN/LV7W/I0TV14VS/FDNLV7WI0TV14VS.SQUARE2.jpg http://cdn.instructables.com/FDN/LV7W/I0TV14VS/FDNLV7WI0TV14VS.SQUARE.jpg http://cdn.instructables.com/FDN/LV7W/I0TV14VS/FDNLV7WI0TV14VS.SMALL.jpg johnstat000 Welcome... TO MY LAIR!!!Here at Wheatley Science industries, we pride ourselves on our personality core development. Here we will teach you how to make your own Aperture Science Personality Core from household materials! You and your friends can enjoy this mindless killing machine- I mean- "Friendl...
By: johnstat000

Continue Reading »]]>
Sat, 4 Oct 2014 12:17:34 PDT
Jackie Chan Adventures Talismans http://www.instructables.com/id/Jackie-Chan-Adventures-Talismans/
Jackie Chan Adventures Talismans - More DIY How To Projects]]> http://cdn.instructables.com/FGW/Q4OG/I0TV618Q/FGWQ4OGI0TV618Q.SQUARE2.jpg http://cdn.instructables.com/FGW/Q4OG/I0TV618Q/FGWQ4OGI0TV618Q.SQUARE.jpg http://cdn.instructables.com/FGW/Q4OG/I0TV618Q/FGWQ4OGI0TV618Q.SMALL.jpg NamedJohnny For several years I was looking to buy talismans from the 2000s tv show : Jackie Chan Adventures. However, once I found something, it was either too expensive or not really look a like ... So, I decided to make my own for cheap with recycle materials!Materials : Cardboard ($ 0) Hot glue ($ 0) ...
By: NamedJohnny

Continue Reading »]]>
Fri, 3 Oct 2014 16:47:18 PDT
Hoverboard - Back to the future 2 http://www.instructables.com/id/Hoverboard-Back-to-the-future-2/
Hoverboard - Back to the future 2 - More DIY How To Projects]]> http://cdn.instructables.com/FXU/H796/I0TV5L9I/FXUH796I0TV5L9I.SQUARE2.jpg http://cdn.instructables.com/FXU/H796/I0TV5L9I/FXUH796I0TV5L9I.SQUARE.jpg http://cdn.instructables.com/FXU/H796/I0TV5L9I/FXUH796I0TV5L9I.SMALL.jpg NamedJohnny Okay, today i'm gonna show you how to make a good looking Hoverboard for less than 30$. We will start with a look on the material to use : Foam Hot glue White glue Glossy paper Spray and normal paint Xacto Scissor Velcro Screw Model and cutting The first thing I did is searching a model...
By: NamedJohnny

Continue Reading »]]>
Fri, 3 Oct 2014 15:39:03 PDT
Sweet Shotgun Shells http://www.instructables.com/id/Sweet-Shotgun-Shells/
Sweet Shotgun Shells - More DIY How To Projects]]> http://cdn.instructables.com/F90/119R/I0R1CXZJ/F90119RI0R1CXZJ.SQUARE2.jpg http://cdn.instructables.com/F90/119R/I0R1CXZJ/F90119RI0R1CXZJ.SQUARE.jpg http://cdn.instructables.com/F90/119R/I0R1CXZJ/F90119RI0R1CXZJ.SMALL.jpg DD28 This project came about when my son wanted to make presents for his friends, he asked me to come up with something for someone who was into Zombies.So after a little research I came up with the idea of supplying his friend with Ammunition for the upcoming Zombie Apocalypse, or at the very least to g...
By: DD28

Continue Reading »]]>
Fri, 3 Oct 2014 11:19:14 PDT
Flipped Out Flask Holder & Belt Strap http://www.instructables.com/id/Flipped-Out-Flask-Holder-Belt-Strap/
Flipped Out Flask Holder & Belt Strap - More DIY How To Projects]]> http://cdn.instructables.com/FV5/DBOP/I0R122XO/FV5DBOPI0R122XO.SQUARE2.jpg http://cdn.instructables.com/FV5/DBOP/I0R122XO/FV5DBOPI0R122XO.SQUARE.jpg http://cdn.instructables.com/FV5/DBOP/I0R122XO/FV5DBOPI0R122XO.SMALL.jpg Dadime I recently posted an instructable for an economical Baldric ( Flipped Out Baldric) I made for my son. He also asked for some accessories to go with his Baldric. This flask holder was one of the embellishments to add to his pirate persona (for this years Ren Fest) Tools And Materials For this pro...
By: Dadime

Continue Reading »]]>
Wed, 1 Oct 2014 14:21:14 PDT
Mario Kart and Luigi Kart http://www.instructables.com/id/Mario-Kart-and-Luigi-Kart/
Mario Kart and Luigi Kart - More DIY How To Projects]]> http://cdn.instructables.com/FZP/31HR/I0PKZL7S/FZP31HRI0PKZL7S.SQUARE2.jpg http://cdn.instructables.com/FZP/31HR/I0PKZL7S/FZP31HRI0PKZL7S.SQUARE.jpg http://cdn.instructables.com/FZP/31HR/I0PKZL7S/FZP31HRI0PKZL7S.SMALL.jpg Beetlesmart Let your kids ride in style this Halloween on a working Mario (or Luigi) Kart. These easy and inexpensive props are sure to be a Halloween hit. You can use any ride-on vehicle or toy to create these Karts. It's best if you can use matching carts and go with friends as your favorite Mario characte...
By: Beetlesmart

Continue Reading »]]>
Tue, 30 Sep 2014 16:16:52 PDT
Harry Potter Apothocary Halloween Jars http://www.instructables.com/id/Harry-Potter-Apothocary-Halloween-Jars/
Harry Potter Apothocary Halloween Jars - More DIY How To Projects]]> http://cdn.instructables.com/FRN/D8B7/I0HYVGPI/FRND8B7I0HYVGPI.SQUARE2.jpg http://cdn.instructables.com/FRN/D8B7/I0HYVGPI/FRND8B7I0HYVGPI.SQUARE.jpg http://cdn.instructables.com/FRN/D8B7/I0HYVGPI/FRND8B7I0HYVGPI.SMALL.jpg tammykva This is a super easy project for Halloween. really fun quick results and is sure to grab a lot of attention at your gathering. Lets Get Started I got this Idea from this web site. Her instructions were very clear, concise and easy to do.http://magiamia.blogspot.com/2013/08/it-glue-gun-plastic-t...
By: tammykva

Continue Reading »]]>
Sat, 27 Sep 2014 08:03:17 PDT
Making a Riddler Cane http://www.instructables.com/id/Making-a-Riddler-Cane/
Making a Riddler Cane - More DIY How To Projects]]> http://cdn.instructables.com/F2S/VRJZ/I0ATK2L6/F2SVRJZI0ATK2L6.SQUARE2.jpg http://cdn.instructables.com/F2S/VRJZ/I0ATK2L6/F2SVRJZI0ATK2L6.SQUARE.jpg http://cdn.instructables.com/F2S/VRJZ/I0ATK2L6/F2SVRJZI0ATK2L6.SMALL.jpg joshwelch9 Here are the steps I took in creating my riddler cane for this Halloween. The Question Mark I went to my computer and searched until I found the appropriate question mark I wanted as my cane topper. My costume this year is geared more toward the riddler played by Jim Carrey. The cane he used had...
By: joshwelch9

Continue Reading »]]>
Sat, 20 Sep 2014 15:54:09 PDT
Laser Cut Star Trek Enterprise Model http://www.instructables.com/id/Laser-Cut-Enterprise/
Laser Cut Star Trek Enterprise Model - More DIY How To Projects]]> http://cdn.instructables.com/FCN/ND4Q/I0A554US/FCNND4QI0A554US.SQUARE2.jpg http://cdn.instructables.com/FCN/ND4Q/I0A554US/FCNND4QI0A554US.SQUARE.jpg http://cdn.instructables.com/FCN/ND4Q/I0A554US/FCNND4QI0A554US.SMALL.jpg masynmachien This is a project I did during my stay at Instructables as Artist in Residence, July 2013. It is part of my ongoing laser cut advent calendar project. That project should end up in a set of 25 little construction sets, for toys and gadgets, cut from one acrylic sheet.As I am a Trekkie something Star...
By: masynmachien

Continue Reading »]]>
Sat, 20 Sep 2014 14:04:08 PDT
Motorized Quidditch Golden Snitch http://www.instructables.com/id/Motorized-Quidditch-Golden-Snitch/
Motorized Quidditch Golden Snitch - More DIY How To Projects]]> http://cdn.instructables.com/FNA/DK4W/I00TKYNM/FNADK4WI00TKYNM.SQUARE2.jpg http://cdn.instructables.com/FNA/DK4W/I00TKYNM/FNADK4WI00TKYNM.SQUARE.jpg http://cdn.instructables.com/FNA/DK4W/I00TKYNM/FNADK4WI00TKYNM.SMALL.jpg caitlinsdad For all of you Harry Potter and Quidditch fans out there, haven't you really wanted to have a working golden snitch in your hand? Well, make this "prop" that seems to come alive with a few simple components. This is a great project for kids to learn about basic electronic circuits. Depending how you...
By: caitlinsdad

Continue Reading »]]>
Sat, 13 Sep 2014 18:16:06 PDT
PVC Training Swords http://www.instructables.com/id/PVC-Training-Swords/
PVC Training Swords - More DIY How To Projects]]> http://cdn.instructables.com/F5J/WDDA/HZMJ6JXS/F5JWDDAHZMJ6JXS.SQUARE2.jpg http://cdn.instructables.com/F5J/WDDA/HZMJ6JXS/F5JWDDAHZMJ6JXS.SQUARE.jpg http://cdn.instructables.com/F5J/WDDA/HZMJ6JXS/F5JWDDAHZMJ6JXS.SMALL.jpg ES16 Lots of people like to do hand to hand activities, but to pay for expensive products such as plastic or rubber swords is often more than its worth, especially when you have multiple players and only one sword.In this Instructable you will Learn how to make a set of affordable swords for any training...
By: ES16

Continue Reading »]]>
Thu, 4 Sep 2014 07:18:26 PDT