Instructables: exploring - stepbystep - woodworking - make - featured http://www.instructables.com Sun, 5 Jul 2015 01:08:39 PDT BLOX v1.01 Making Half Blind Dovetail Drawers for a Walnut Desk http://www.instructables.com/id/Making-Half-Blind-Dovetail-Drawers-for-a-Walnut-De/
Making Half Blind Dovetail Drawers for a Walnut Desk - More DIY How To Projects]]> http://cdn.instructables.com/FQU/VSQE/IBM25CPY/FQUVSQEIBM25CPY.SQUARE2.jpg http://cdn.instructables.com/FQU/VSQE/IBM25CPY/FQUVSQEIBM25CPY.SQUARE.jpg http://cdn.instructables.com/FQU/VSQE/IBM25CPY/FQUVSQEIBM25CPY.SMALL.jpg darbinorvar Using half blind dovetails is really great for certain projects like making drawers for example. Half blind dovetails don't go all the way through, like through dovetails so you can't see the dovetails until you open the drawer. I made four drawers with half blind dovetails for a desk that I built, ...
By: darbinorvar

Continue Reading »]]>
Thu, 2 Jul 2015 14:32:49 PDT
Drunken Cutting Boards http://www.instructables.com/id/Drunken-Cutting-Boards/
Drunken Cutting Boards - More DIY How To Projects]]> http://cdn.instructables.com/FKY/RZEH/IBGCWC2W/FKYRZEHIBGCWC2W.SQUARE2.jpg http://cdn.instructables.com/FKY/RZEH/IBGCWC2W/FKYRZEHIBGCWC2W.SQUARE.jpg http://cdn.instructables.com/FKY/RZEH/IBGCWC2W/FKYRZEHIBGCWC2W.SMALL.jpg kludge77 This is my first cutting board. An interesting pattern emerges from the flowing "S" shape and works really well with the high contrast of maple and walnut. Taking Stock Of Your Stock The process begins with two board that are the same thickness. In this case my lumber was 7/8 of an inch thick....
By: kludge77

Continue Reading »]]>
Mon, 29 Jun 2015 09:11:40 PDT
DIY Simple Modern Desk http://www.instructables.com/id/DIY-Simple-Modern-Desk/
DIY Simple Modern Desk - More DIY How To Projects]]> http://cdn.instructables.com/FJP/MHAH/IAEKABMP/FJPMHAHIAEKABMP.SQUARE2.jpg http://cdn.instructables.com/FJP/MHAH/IAEKABMP/FJPMHAHIAEKABMP.SQUARE.jpg http://cdn.instructables.com/FJP/MHAH/IAEKABMP/FJPMHAHIAEKABMP.SMALL.jpg darbinorvar This is a very simple and modern looking desk. It's made out of plywood, with a stained top and painted legs. It's lightweight, easy to disassemble and very affordable to build. It would be perfect as a student's desk, in a cool modern office, or if you're looking to incorporate a stylish work space...
By: darbinorvar

Continue Reading »]]>
Tue, 2 Jun 2015 17:14:59 PDT
Rock Salt Margarita Glass! http://www.instructables.com/id/Rock-Salt-Margarita-Glass/
Rock Salt Margarita Glass! - More DIY How To Projects]]> http://cdn.instructables.com/FVV/MWK1/IA81Q56C/FVVMWK1IA81Q56C.SQUARE2.jpg http://cdn.instructables.com/FVV/MWK1/IA81Q56C/FVVMWK1IA81Q56C.SQUARE.jpg http://cdn.instructables.com/FVV/MWK1/IA81Q56C/FVVMWK1IA81Q56C.SMALL.jpg kludge77 This glass was made from a block of salt block purchased from the cooking store and turned on the lathe. I had made a bracelet from the block about a month ago but wanted to try something a bit more complex. There were enough pieces left to make a glass... Cutting The Blocks The salt cut every ...
By: kludge77

Continue Reading »]]>
Wed, 27 May 2015 10:11:47 PDT
Recycled Cardboard Bottle Stopper http://www.instructables.com/id/Recycled-Cardboard-Bottle-Stopper/
Recycled Cardboard Bottle Stopper - More DIY How To Projects]]> http://cdn.instructables.com/FMJ/Q8M3/I9O1H3GP/FMJQ8M3I9O1H3GP.SQUARE2.jpg http://cdn.instructables.com/FMJ/Q8M3/I9O1H3GP/FMJQ8M3I9O1H3GP.SQUARE.jpg http://cdn.instructables.com/FMJ/Q8M3/I9O1H3GP/FMJQ8M3I9O1H3GP.SMALL.jpg kludge77 Turning cardboard on the lathe. I needed a quick project after a failed larger project. This started out as an experiment, but I have to say I really like the look of it! I not sure if another cardboard project is in my future but for now, I'm just happy to follow up a failure with a success! Cut...
By: kludge77

Continue Reading »]]>
Thu, 14 May 2015 11:15:23 PDT
Wooden Cell Phone Projector! http://www.instructables.com/id/Wooden-Cell-Phone-Projector/
Wooden Cell Phone Projector! - More DIY How To Projects]]> http://cdn.instructables.com/FBX/EKBL/I99R1NC6/FBXEKBLI99R1NC6.SQUARE2.jpg http://cdn.instructables.com/FBX/EKBL/I99R1NC6/FBXEKBLI99R1NC6.SQUARE.jpg http://cdn.instructables.com/FBX/EKBL/I99R1NC6/FBXEKBLI99R1NC6.SMALL.jpg kludge77 Make a wooden projector for your cell phone. And if you happen to watch the Force Awakens trailer 4 times in a row on your shop wall, well it is Star Wars day so who can blame you!This one is made from 1/8 Baltic Birch plywood and measures, 6" x 5 1/2" x 3" and has a lens savaged from an old p...
By: kludge77

Continue Reading »]]>
Mon, 4 May 2015 12:13:48 PDT
Simple Barn Board Gift Case http://www.instructables.com/id/Simple-Barn-Board-Gift-Case/
Simple Barn Board Gift Case - More DIY How To Projects]]> http://cdn.instructables.com/FI4/RIX2/I7CCDBN0/FI4RIX2I7CCDBN0.SQUARE2.jpg http://cdn.instructables.com/FI4/RIX2/I7CCDBN0/FI4RIX2I7CCDBN0.SQUARE.jpg http://cdn.instructables.com/FI4/RIX2/I7CCDBN0/FI4RIX2I7CCDBN0.SMALL.jpg damianzuch Hi internet friends! This is a fairly simple Instructable that shows how I routered out an outline of a pocket knife so that I could give it to my friend in a more interesting package than a box. I had purchased a DOUK DOUK knife (I will include info about this awesome knife at the end) as a gift fo...
By: damianzuch

Continue Reading »]]>
Tue, 17 Mar 2015 17:12:43 PDT
Candy Sprinkle Cake Stand http://www.instructables.com/id/Candy-Sprinkle-Cake-Stand/
Candy Sprinkle Cake Stand - More DIY How To Projects]]> http://cdn.instructables.com/FLZ/HG80/I74N57LU/FLZHG80I74N57LU.SQUARE2.jpg http://cdn.instructables.com/FLZ/HG80/I74N57LU/FLZHG80I74N57LU.SQUARE.jpg http://cdn.instructables.com/FLZ/HG80/I74N57LU/FLZHG80I74N57LU.SMALL.jpg kludge77 Prepare yourself for a sugar rush. I'm going to mix glue, cake sprinkles and cherry wood into a bonkers looking cake stand.I don't think I was quite prepared for how colorful this project would end up or how much of a mess it would leave in the shop! Still, I'm quite pleased with it.My daughter was ...
By: kludge77

Continue Reading »]]>
Wed, 11 Mar 2015 10:39:33 PDT
crazy lid holder http://www.instructables.com/id/crazy-lid-holder/
crazy lid holder - More DIY How To Projects]]> http://cdn.instructables.com/F2H/80KK/I6W2X3KP/F2H80KKI6W2X3KP.SQUARE2.jpg http://cdn.instructables.com/F2H/80KK/I6W2X3KP/F2H80KKI6W2X3KP.SQUARE.jpg http://cdn.instructables.com/F2H/80KK/I6W2X3KP/F2H80KKI6W2X3KP.SMALL.jpg StephanP1 You can build this little project in just one hour Cut two boards to the same dimensions How big or how small doesn't matter Drill a hole in each board The hole should be bigger then the thickness of the board Make a first cut with the table saw Just cut only up to the hole Make a sec...
By: StephanP1

Continue Reading »]]>
Fri, 6 Mar 2015 11:41:10 PST
Batman Spatula: The Dark Utensil http://www.instructables.com/id/Batman-Spatula-The-Dark-Utensil/
Batman Spatula: The Dark Utensil - More DIY How To Projects]]> http://cdn.instructables.com/FX9/A4KB/I6NI2L95/FX9A4KBI6NI2L95.SQUARE2.jpg http://cdn.instructables.com/FX9/A4KB/I6NI2L95/FX9A4KBI6NI2L95.SQUARE.jpg http://cdn.instructables.com/FX9/A4KB/I6NI2L95/FX9A4KBI6NI2L95.SMALL.jpg kludge77 The kitchen spatula you need for your late night pre-crime fighting sandwich making. Made from a $1 spatula with a custom cut claro walnut handle and finished with boiled linseed oil.This is truly the utensil fit for a superhero... I picked up a inexpensive spatula from the local $1 store. The han...
By: kludge77

Continue Reading »]]>
Fri, 27 Feb 2015 06:54:01 PST
Making The Zoetrope http://www.instructables.com/id/Making-The-Zoetrope/
Making The Zoetrope - More DIY How To Projects]]> http://cdn.instructables.com/F3E/RM8T/I5BHWB6Z/F3ERM8TI5BHWB6Z.SQUARE2.jpg http://cdn.instructables.com/F3E/RM8T/I5BHWB6Z/F3ERM8TI5BHWB6Z.SQUARE.jpg http://cdn.instructables.com/F3E/RM8T/I5BHWB6Z/F3ERM8TI5BHWB6Z.SMALL.jpg kludge77 A Zoetrope is an animation toy that literally translates to "life turning." While I had many challenges on this build, I have to say is it easily one of my favorite creations. I have a particular fondness for toys....My main worry was that the wedges would de-lamiate from the block due to the turnin...
By: kludge77

Continue Reading »]]>
Sat, 24 Jan 2015 13:49:47 PST
Coinapult. The Coin Flipping Catapult! http://www.instructables.com/id/Coinapult-The-Coin-Flipping-Catapult/
Coinapult. The Coin Flipping Catapult! - More DIY How To Projects]]> http://cdn.instructables.com/FCU/P8NA/I4SCDWP1/FCUP8NAI4SCDWP1.SQUARE2.jpg http://cdn.instructables.com/FCU/P8NA/I4SCDWP1/FCUP8NAI4SCDWP1.SQUARE.jpg http://cdn.instructables.com/FCU/P8NA/I4SCDWP1/FCUP8NAI4SCDWP1.SMALL.jpg kludge77 The design is super simple. I'm not one for over complicating an item. Just two sides and two dowels make up the base. The flipper is just held in place by the tension on the rubber band.I made this from resawn claro walnut and 3/8 birch dowels. It flips your coin in the the air and you can either...
By: kludge77

Continue Reading »]]>
Sun, 11 Jan 2015 10:03:56 PST
Classy wood Phone case with Sugru hinge and latch http://www.instructables.com/id/Classy-wood-Phone-case-with-Sugru-hinge-and-latch/
Classy wood Phone case with Sugru hinge and latch - More DIY How To Projects]]> http://cdn.instructables.com/FET/KKFF/I2KSPN3X/FETKKFFI2KSPN3X.SQUARE2.jpg http://cdn.instructables.com/FET/KKFF/I2KSPN3X/FETKKFFI2KSPN3X.SQUARE.jpg http://cdn.instructables.com/FET/KKFF/I2KSPN3X/FETKKFFI2KSPN3X.SMALL.jpg Synhak Want to make an awesome wooden case for your phone? With some scrap plywood and some Sugru, you can have a sweet case that will protect your favorite cellular device. Materials:Some left over thin plywood (I used 3/16 prefinished cabinet ply)Hot glue gun (hot melt works better IMO)Scroll or jig saw,...
By: Synhak

Continue Reading »]]>
Mon, 17 Nov 2014 21:32:10 PST
What If You Made A Beer Mug From Recycled Coasters http://www.instructables.com/id/What-If-You-Made-A-Beer-Mug-From-Recycled-Coasters/
What If You Made A Beer Mug From Recycled Coasters - More DIY How To Projects]]> http://cdn.instructables.com/FP8/MKV1/I1MQ71R3/FP8MKV1I1MQ71R3.SQUARE2.jpg http://cdn.instructables.com/FP8/MKV1/I1MQ71R3/FP8MKV1I1MQ71R3.SQUARE.jpg http://cdn.instructables.com/FP8/MKV1/I1MQ71R3/FP8MKV1I1MQ71R3.SMALL.jpg kludge77 When I first approached with this idea it seemed like it would be a simple project. That should have been a warning sign right there, but my brain just thought, "Make a functional pint glass from discarded beer coasters? I wonder why no one has ever done anything like that before." I now know the ...
By: kludge77

Continue Reading »]]>
Fri, 24 Oct 2014 10:31:49 PDT
DIY Making Groot from Guardians of the Galaxy http://www.instructables.com/id/DIY-Making-Groot-from-Guardians-of-the-Galaxy/
DIY Making Groot from Guardians of the Galaxy - More DIY How To Projects]]> http://cdn.instructables.com/FDS/ZELV/I1FQ9LS9/FDSZELVI1FQ9LS9.SQUARE2.jpg http://cdn.instructables.com/FDS/ZELV/I1FQ9LS9/FDSZELVI1FQ9LS9.SQUARE.jpg http://cdn.instructables.com/FDS/ZELV/I1FQ9LS9/FDSZELVI1FQ9LS9.SMALL.jpg darbinorvar DIY How To Make your own Baby GrootIn this short tutorial I take you step by step how I was able to make the baby Groot from the end of the Guardians of the Galaxy movie.For more info and to see the video: http://youtube.com/darbinorvar How To Build Groot Materials 3 inch square piece of mahogan...
By: darbinorvar

Continue Reading »]]>
Tue, 21 Oct 2014 10:50:30 PDT
Pirate Chest Cooler Box http://www.instructables.com/id/Pirate-Chest-Cooler-Box/
Pirate Chest Cooler Box - More DIY How To Projects]]> http://cdn.instructables.com/FXO/D2D2/I0LCOEIJ/FXOD2D2I0LCOEIJ.SQUARE2.jpg http://cdn.instructables.com/FXO/D2D2/I0LCOEIJ/FXOD2D2I0LCOEIJ.SQUARE.jpg http://cdn.instructables.com/FXO/D2D2/I0LCOEIJ/FXOD2D2I0LCOEIJ.SMALL.jpg joshwelch9 I recently saw an instructable about turning a cooler into a treasure chest and had to give it a go.http://www.instructables.com/id/Pirate-Chest-Beer-Cooler/ I'll walk you through the steps I took to turn my cooler into a treasure chest. All of my materials used were recycled wood from pallets and t...
By: joshwelch9

Continue Reading »]]>
Mon, 29 Sep 2014 21:14:03 PDT
Ice Cream Pint Lock http://www.instructables.com/id/Ice-Cream-Pint-Lock/
Ice Cream Pint Lock - More DIY How To Projects]]> http://cdn.instructables.com/FIW/46AI/HZTO9H1R/FIW46AIHZTO9H1R.SQUARE2.jpg http://cdn.instructables.com/FIW/46AI/HZTO9H1R/FIW46AIHZTO9H1R.SQUARE.jpg http://cdn.instructables.com/FIW/46AI/HZTO9H1R/FIW46AIHZTO9H1R.SMALL.jpg kludge77 They say that necessity is the mother of invention and while I don’t claim to have invented the idea of a pint lock, this is the first one I’ve ever seen out of the wood. In addition I love how outrageous it looks with that giant old school padlock on it! This is made with some soft maple, a sm...
By: kludge77

Continue Reading »]]>
Mon, 8 Sep 2014 08:29:59 PDT
Wooden Money Clip http://www.instructables.com/id/Wooden-Money-Clip/
Wooden Money Clip - More DIY How To Projects]]> http://cdn.instructables.com/F2E/Z8D4/HZ5RPDS1/F2EZ8D4HZ5RPDS1.SQUARE2.jpg http://cdn.instructables.com/F2E/Z8D4/HZ5RPDS1/F2EZ8D4HZ5RPDS1.SQUARE.jpg http://cdn.instructables.com/F2E/Z8D4/HZ5RPDS1/F2EZ8D4HZ5RPDS1.SMALL.jpg kludge77 I've been carrying a wooden money clip for about 20 years or so. It's nice to not have to lug a wallet along for everything. You can get an ID, credit card and some bills in there with no trouble, and it fits in your front pocket where it is much harder to get picked! This one is out of maple and...
By: kludge77

Continue Reading »]]>
Fri, 22 Aug 2014 17:04:54 PDT
Free Floating TARDIS http://www.instructables.com/id/Free-Floating-TARDIS/
Free Floating TARDIS - More DIY How To Projects]]> http://cdn.instructables.com/F27/COPR/HYY8LXXP/F27COPRHYY8LXXP.SQUARE2.jpg http://cdn.instructables.com/F27/COPR/HYY8LXXP/F27COPRHYY8LXXP.SQUARE.jpg http://cdn.instructables.com/F27/COPR/HYY8LXXP/F27COPRHYY8LXXP.SMALL.jpg kludge77 This is a free floating TARDIS desk ornament. It hangs suspended in time and space as if flying in the time vortex. Perhaps off to some Dalek infested back alley someone in Cardiff... Made with walnut, maple and 4 rare earth magnets, this is fun build in anticipation of the 8th season of Doctor W...
By: kludge77

Continue Reading »]]>
Mon, 18 Aug 2014 05:57:52 PDT
Book to Tablet Stand http://www.instructables.com/id/Book-to-Tablet-Stand/
Book to Tablet Stand - More DIY How To Projects]]> http://cdn.instructables.com/FI9/I39E/HY12BICZ/FI9I39EHY12BICZ.SQUARE2.jpg http://cdn.instructables.com/FI9/I39E/HY12BICZ/FI9I39EHY12BICZ.SQUARE.jpg http://cdn.instructables.com/FI9/I39E/HY12BICZ/FI9I39EHY12BICZ.SMALL.jpg kludge77 Tablet stand made from a 400 page book and some epoxy resin. Paper micarta is the proper term for it, but it doesn't really capture the essence of the idea. Those 400 pages hold but a single story, and now they can upright a device capable of holding thousands of stories. Really it's the ultimate u...
By: kludge77

Continue Reading »]]>
Fri, 25 Jul 2014 08:30:50 PDT
Adirondack chair from ONE board http://www.instructables.com/id/Adirondack-chair-from-ONE-board/
Adirondack chair from ONE board - More DIY How To Projects]]> http://cdn.instructables.com/FWI/7MMY/HWS3RTLU/FWI7MMYHWS3RTLU.SQUARE2.jpg http://cdn.instructables.com/FWI/7MMY/HWS3RTLU/FWI7MMYHWS3RTLU.SQUARE.jpg http://cdn.instructables.com/FWI/7MMY/HWS3RTLU/FWI7MMYHWS3RTLU.SMALL.jpg seamster Nothing says summertime like a wooden Adirondack chair!These classic outdoor chairs are comfy and perfect for resting in after a long day, or for getting up early and watching the sun rise while sipping your favorite hot beverage. There are about a million variations on the Adirondack chair, and an ...
By: seamster

Continue Reading »]]>
Tue, 24 Jun 2014 16:49:44 PDT
Marble Note Holder http://www.instructables.com/id/Marble-Note-Holder/
Marble Note Holder - More DIY How To Projects]]> http://cdn.instructables.com/FMZ/RTSI/HW4OQYL1/FMZRTSIHW4OQYL1.SQUARE2.jpg http://cdn.instructables.com/FMZ/RTSI/HW4OQYL1/FMZRTSIHW4OQYL1.SQUARE.jpg http://cdn.instructables.com/FMZ/RTSI/HW4OQYL1/FMZRTSIHW4OQYL1.SMALL.jpg kludge77 Something you may not have seen before...I used 6/4 mulberry for the top portion and a scrap piece of 1/4 oak veneered MDF. Added a piece of acrylic and the marbles and you get a nice note holder.I then recessed a couple of rare earth magnets and you've got a pretty simple project.I'm thinking that ...
By: kludge77

Continue Reading »]]>
Mon, 9 Jun 2014 11:10:08 PDT
Blue Jean Bracelet http://www.instructables.com/id/Blue-Jean-Bracelet/
Blue Jean Bracelet - More DIY How To Projects]]> http://cdn.instructables.com/F0Y/YZF3/HVTWBJFM/F0YYZF3HVTWBJFM.SQUARE2.jpg http://cdn.instructables.com/F0Y/YZF3/HVTWBJFM/F0YYZF3HVTWBJFM.SQUARE.jpg http://cdn.instructables.com/F0Y/YZF3/HVTWBJFM/F0YYZF3HVTWBJFM.SMALL.jpg kludge77 I made this from a recycled part of old blue jeans.These jeans of mine had seen better days, but with a little epoxy and a quick turn on the lathe, I transform them into something unique!I originally sprayed it with lacquer, but it just wasn't right. So I sanded it off and left it unfinished. The pa...
By: kludge77

Continue Reading »]]>
Fri, 30 May 2014 19:53:26 PDT
Colored Pencil Ring http://www.instructables.com/id/Colored-Pencil-Ring/
Colored Pencil Ring - More DIY How To Projects]]> http://cdn.instructables.com/FFH/D1P3/HUYM4GQG/FFHD1P3HUYM4GQG.SQUARE2.jpg http://cdn.instructables.com/FFH/D1P3/HUYM4GQG/FFHD1P3HUYM4GQG.SQUARE.jpg http://cdn.instructables.com/FFH/D1P3/HUYM4GQG/FFHD1P3HUYM4GQG.SMALL.jpg kludge77 I turn a ring from a box of colored pencils. 12 pencils glued into a blank an then turned on the lathe. The outcome is striking! Finished with spray lacquer.Ring sizing to bit size for inside diameter: http://www.walkersjewelers.com/Support/CompanyInformation.aspx
By: kludge77

Continue Reading »]]>
Sun, 11 May 2014 10:12:40 PDT
Tobacco pipe making http://www.instructables.com/id/Tobacco-pipe-making/
Tobacco pipe making - More DIY How To Projects]]> http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SQUARE2.jpg http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SQUARE.jpg http://cdn.instructables.com/FG4/XQAD/HUIHIO4G/FG4XQADHUIHIO4G.SMALL.jpg ElmarsM Hey! First of all I wanted to say, that I'm from Latvia, so I'm sorry for my english. This is a quite detailed, step-by-step instructable about pipe making. I am not a professional, I just wanted to try my skills. First step is to choose the wood for your pipe. In my case the most suitable w...
By: ElmarsM

Continue Reading »]]>
Sun, 27 Apr 2014 10:12:54 PDT
Steampunk Desk Lamp http://www.instructables.com/id/Steampunk-Desk-Lamp/ http://cdn.instructables.com/FSH/Q9H7/HURHS0RR/FSHQ9H7HURHS0RR.SQUARE2.jpg http://cdn.instructables.com/FSH/Q9H7/HURHS0RR/FSHQ9H7HURHS0RR.SQUARE.jpg http://cdn.instructables.com/FSH/Q9H7/HURHS0RR/FSHQ9H7HURHS0RR.SMALL.jpg kludge77 Steampunk desk lamp. Brazilian cherry, plywood and pipe cobbled together for a little industrial illumination. Finished with wipe on poly, hammered grey spray paint and little bit of metal nonsense cobbled together from my shed... I added some gears and bits from carriage bolts and electrical fitti...
By: kludge77

Continue Reading »]]>
Sun, 4 May 2014 20:13:44 PDT
Disposable Faceplates - For the Lathe http://www.instructables.com/id/Disposable-Faceplates-For-the-Lathe/
Disposable Faceplates - For the Lathe - More DIY How To Projects]]> http://cdn.instructables.com/FTQ/0SDJ/HUL9B2FW/FTQ0SDJHUL9B2FW.SQUARE2.jpg http://cdn.instructables.com/FTQ/0SDJ/HUL9B2FW/FTQ0SDJHUL9B2FW.SQUARE.jpg http://cdn.instructables.com/FTQ/0SDJ/HUL9B2FW/FTQ0SDJHUL9B2FW.SMALL.jpg SlickSqueegie All wood lathes come with a face-plate to get you turning right away. I use mine quite a bit for large projects, but oftentimes the face-plate is too large for a project. Or there is not a lot of extra wood available for screws to bite into without ruining the project. And sometimes, I have a proj...
By: SlickSqueegie

Continue Reading »]]>
Tue, 29 Apr 2014 07:04:34 PDT
Make a Yoda desk ornament http://www.instructables.com/id/Make-a-Yoda-desk-ornament/ http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SQUARE2.jpg http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SQUARE.jpg http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SMALL.jpg kludge77 I turn a Star Wars candy dispenser into a sage desk ornament. Master Yoda's wisdom should not be discarded so readily.. The wood is claro walnut with a wipe on poly finish.
By: kludge77

Continue Reading »]]>
Sun, 30 Mar 2014 18:18:54 PDT
How To Make an Advanced Woodwork Slingshot http://www.instructables.com/id/How-To-Make-an-Advanced-Woodwork-Slingshot/
How To Make an Advanced Woodwork Slingshot - More DIY How To Projects]]> http://cdn.instructables.com/F0U/ZSH7/HSJAPLMF/F0UZSH7HSJAPLMF.SQUARE2.jpg http://cdn.instructables.com/F0U/ZSH7/HSJAPLMF/F0UZSH7HSJAPLMF.SQUARE.jpg http://cdn.instructables.com/F0U/ZSH7/HSJAPLMF/F0UZSH7HSJAPLMF.SMALL.jpg baneling-bust hello everyone in this tutorial i am showing you all how to make an advanced woodworking slingshot with a metal core. My Rambone Slingshot Tutorial Playlist: http://www.youtube.com/playlist?list=PLiBJ_D3_ZSgIOL5n0-6jlRYzVjLadncRt Rambone slingshot blueprints: http://www.theslingshotforum....
By: baneling-bust

Continue Reading »]]>
Sun, 9 Mar 2014 03:24:23 PDT
Pencil Spin Top http://www.instructables.com/id/Pencil-Spin-Top/ http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SQUARE2.jpg http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SQUARE.jpg http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SMALL.jpg kludge77 This is a piece of sycamore turned to a top shape. You then insert a pencil and spin it up. I used 1/4 copper collars to give the pencil a tight grip. It draws cool circles and shortening or lengthening the pencil will give it different paths as it alters the center of gravity.
By: kludge77

Continue Reading »]]>
Tue, 11 Mar 2014 07:52:47 PDT
Glass Bottle Bird Feeder http://www.instructables.com/id/Glass-Bottle-Bird-Feeder/ http://cdn.instructables.com/FP7/I0L9/HSBSMDFD/FP7I0L9HSBSMDFD.SQUARE2.jpg http://cdn.instructables.com/FP7/I0L9/HSBSMDFD/FP7I0L9HSBSMDFD.SQUARE.jpg http://cdn.instructables.com/FP7/I0L9/HSBSMDFD/FP7I0L9HSBSMDFD.SMALL.jpg kludge77 This is a glass bottle bird feeder. The bottle was a $1 from the local thrift store and is needed first to get the dimension for the rest of the project. I used cypress as the base wood and hard maple as the accent. The hardest part was trying to clamp up that back piece...
By: kludge77

Continue Reading »]]>
Tue, 4 Mar 2014 12:26:20 PST
Make a custom sewing table http://www.instructables.com/id/Make-a-custom-sewing-table/
Make a custom sewing table - More DIY How To Projects]]> http://cdn.instructables.com/FZC/ZLOQ/HQ8BF1IK/FZCZLOQHQ8BF1IK.SQUARE2.jpg http://cdn.instructables.com/FZC/ZLOQ/HQ8BF1IK/FZCZLOQHQ8BF1IK.SQUARE.jpg http://cdn.instructables.com/FZC/ZLOQ/HQ8BF1IK/FZCZLOQHQ8BF1IK.SMALL.jpg seamster For years I've wanted to make myself a large, dedicated sewing table. I finally got around to it and am very happy with how it turned out.  The table is 32 inches tall with a 4-foot square work surface. The large work surface is great for cutting and pinning fabric, and provides a huge outfeed are...
By: seamster

Continue Reading »]]>
Sat, 11 Jan 2014 15:39:11 PST
Plywood Go Getas! http://www.instructables.com/id/Plywood-Go-Getas/
Plywood Go Getas! - More DIY How To Projects]]> http://cdn.instructables.com/F1Q/PONV/HPRIBNF0/F1QPONVHPRIBNF0.SQUARE2.jpg http://cdn.instructables.com/F1Q/PONV/HPRIBNF0/F1QPONVHPRIBNF0.SQUARE.jpg http://cdn.instructables.com/F1Q/PONV/HPRIBNF0/F1QPONVHPRIBNF0.SMALL.jpg az√ľkiBEAN These are Geta slippers. They're different cos they're made of plywood, with replaceable wooden Has (teeth)! Over time, the stilts on the bottom (Ha) wear down. So that you won't have to throw away the whole pair, I've made these to be tough, with replaceable Ha so you can enjoy them indefinitely. T...
By: azükiBEAN

Continue Reading »]]>
Sun, 29 Dec 2013 08:34:16 PST
Build a table from old barn board http://www.instructables.com/id/Build-a-table-from-old-barn-board/
Build a table from old barn board - More DIY How To Projects]]> http://cdn.instructables.com/FTV/IB1N/HLJVDRUQ/FTVIB1NHLJVDRUQ.SQUARE2.jpg http://cdn.instructables.com/FTV/IB1N/HLJVDRUQ/FTVIB1NHLJVDRUQ.SQUARE.jpg http://cdn.instructables.com/FTV/IB1N/HLJVDRUQ/FTVIB1NHLJVDRUQ.SMALL.jpg damianzuch Hey alla y'all, I'm going to show you how I built a barn board table. I'm entering my table in the I COULD MAKE THAT contest, so if you like it please vote for it (hint hint - click in the upper right corner!!)! The design is based off a table I saw at a store for $800 - here - and I thought I could...
By: damianzuch

Continue Reading »]]>
Sat, 14 Sep 2013 01:03:01 PDT
UFO light http://www.instructables.com/id/UFO-light/
UFO light - More DIY How To Projects]]> http://cdn.instructables.com/FZE/AE83/HJKC11QI/FZEAE83HJKC11QI.SQUARE2.jpg http://cdn.instructables.com/FZE/AE83/HJKC11QI/FZEAE83HJKC11QI.SQUARE.jpg http://cdn.instructables.com/FZE/AE83/HJKC11QI/FZEAE83HJKC11QI.SMALL.jpg SlickSqueegie This little novelty UFO light is sure to get a lot of attention! This is a UFO desk/table lamp. Made on the lathe from Walnut, Maple and Oak. It has 8 LED's around the perimeter of the disk. The LED's came from hacking up a dollar store flash-light. I used the switch as well, from the flashlight. I ...
By: SlickSqueegie

Continue Reading »]]>
Tue, 6 Aug 2013 10:03:33 PDT
Rings made from solid wood http://www.instructables.com/id/Rings-made-from-solid-wood/
Rings made from solid wood - More DIY How To Projects]]> http://cdn.instructables.com/FKC/I7XZ/HIPIXHXL/FKCI7XZHIPIXHXL.SQUARE2.jpg http://cdn.instructables.com/FKC/I7XZ/HIPIXHXL/FKCI7XZHIPIXHXL.SQUARE.jpg http://cdn.instructables.com/FKC/I7XZ/HIPIXHXL/FKCI7XZHIPIXHXL.SMALL.jpg SlickSqueegie These are quick and simple rings made form small scraps of hardwood turned on a lathe. The rings pictured here are Walnut and Hickory. I haven't tried these out of soft wood such as pine, but I do not think they would work to well so stick to a hardwood. These really are very simple, the hardest par...
By: SlickSqueegie

Continue Reading »]]>
Thu, 4 Jul 2013 21:25:03 PDT
Birch Bark Flask http://www.instructables.com/id/Birch-Bark-Flask/
Birch Bark Flask - More DIY How To Projects]]> http://cdn.instructables.com/F6S/32AN/F1A4Y1M0/F6S32ANF1A4Y1M0.SQUARE2.jpg http://cdn.instructables.com/F6S/32AN/F1A4Y1M0/F6S32ANF1A4Y1M0.SQUARE.jpg http://cdn.instructables.com/F6S/32AN/F1A4Y1M0/F6S32ANF1A4Y1M0.SMALL.jpg wizworm Create a Flask out of Paper Birch Bark Peel the Bark From your Victim Use a sharp Box cutter to score the bark in a long straight line down the stick. Use a knife slowly separate the bark from the branch. then Scrape any left over material off the bark with the knife Make the Top and Bottom ...
By: wizworm

Continue Reading »]]>
Tue, 15 May 2007 00:46:18 PDT
Make a Hide - A - Key (stash spot) http://www.instructables.com/id/Make-a-Hide-A-Key-stash-spot/
Make a Hide - A - Key (stash spot) - More DIY How To Projects]]> http://cdn.instructables.com/FSS/FW7B/G3E2C3VA/FSSFW7BG3E2C3VA.SQUARE2.jpg http://cdn.instructables.com/FSS/FW7B/G3E2C3VA/FSSFW7BG3E2C3VA.SQUARE.jpg http://cdn.instructables.com/FSS/FW7B/G3E2C3VA/FSSFW7BG3E2C3VA.SMALL.jpg durtbikedave This instructable will show how I turned a scrap piece of wood into a secret Hide - A - Key.  This is another project that cost me close to nothing to build.  You will need a few power tools so be careful!! Materials and tools needed You will need a saw.  I use a chop saw and a band saw.  A coupl...
By: durtbikedave

Continue Reading »]]>
Sat, 19 Dec 2009 20:51:05 PST
http://www.instructables.com/id/Make-a-Classic-Wood-Fish-Lure-Keyfob/
- More DIY How To Projects]]> http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif triumphman
By: triumphman

Continue Reading »]]>
Fri, 6 Jul 2012 07:42:11 PDT
Make a bowl out of a log part 1 http://www.instructables.com/id/Make-a-bowl-out-of-a-log-part-1/
Make a bowl out of a log part 1 - More DIY How To Projects]]> http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SQUARE2.jpg http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SQUARE.jpg http://cdn.instructables.com/FSQ/4YDY/H03LYPW9/FSQ4YDYH03LYPW9.SMALL.jpg SlickSqueegie The only thing I like better than turning bowls out of wood, is turning bowls out of free wood! Throuought the summer trees fall down. Im constantly looking for nice pieces carelessly thrown out.  The only bad part about it is they are always wet. Wood has a high percentage of water stored in the tr...
By: SlickSqueegie

Continue Reading »]]>
Fri, 23 Mar 2012 17:26:58 PDT
How to make an Arrow Of Light award http://www.instructables.com/id/How-to-make-an-arrow-of-light-award/
How to make an Arrow Of Light award - More DIY How To Projects]]> http://cdn.instructables.com/FSV/3KHC/GZQ40YMA/FSV3KHCGZQ40YMA.SQUARE2.jpg http://cdn.instructables.com/FSV/3KHC/GZQ40YMA/FSV3KHCGZQ40YMA.SQUARE.jpg http://cdn.instructables.com/FSV/3KHC/GZQ40YMA/FSV3KHCGZQ40YMA.SMALL.jpg Mrballeng The Arrow Of Light is the highest award a Cub Scout can earn. After completing the requirements it’s presented to him before he moves onto Boy Scouts. I recently had the task of making 8 awards. I was able to find plenty of examples but very few tutorials. This instructable should give you a startin...
By: Mrballeng

Continue Reading »]]>
Fri, 16 Mar 2012 11:53:23 PDT
Wood Kindle Case http://www.instructables.com/id/Wood-Kindle-Case/
Wood Kindle Case - More DIY How To Projects]]> http://cdn.instructables.com/FDN/HUGH/GS3BDR4I/FDNHUGHGS3BDR4I.SQUARE2.jpg http://cdn.instructables.com/FDN/HUGH/GS3BDR4I/FDNHUGHGS3BDR4I.SQUARE.jpg http://cdn.instructables.com/FDN/HUGH/GS3BDR4I/FDNHUGHGS3BDR4I.SMALL.jpg ChrysN I was given a Kindle for Christmas a few years ago and I had in mind to make a case for it.  It took me a while to decide on what I wanted.  Since most of the reading I do is on public transit traveling to and from work, I needed something that would protect my e-book reader from the wear and tear i...
By: ChrysN

Continue Reading »]]>
Thu, 8 Sep 2011 16:25:41 PDT
How to make a cube within cube within a cube puzzle http://www.instructables.com/id/How-to-make-a-cube-inside-a-cube-inside-a-cube/
How to make a cube within cube within a cube puzzle - More DIY How To Projects]]> http://cdn.instructables.com/FUD/GNPJ/GNCXO1AA/FUDGNPJGNCXO1AA.SQUARE2.jpg http://cdn.instructables.com/FUD/GNPJ/GNCXO1AA/FUDGNPJGNCXO1AA.SQUARE.jpg http://cdn.instructables.com/FUD/GNPJ/GNCXO1AA/FUDGNPJGNCXO1AA.SMALL.jpg sabladask http://www.youtube.com/watch?v=HCo8mkD5ZiI   In this instructabe I will show you how to make a cube within a cube within a cube. The process itself is not very hard but it takes some time making it. The cube have no purpose, exept form maby getting people puzzeld about how you got them in t...
By: sabladask

Continue Reading »]]>
Fri, 6 May 2011 13:17:19 PDT
How to store your Random Orbital Sander Discs in a shopmade box! http://www.instructables.com/id/How-to-store-your--Random-Orbital-Sander-Discs-in-/
How to store your Random Orbital Sander Discs in a shopmade box! - More DIY How To Projects]]> http://cdn.instructables.com/FNW/2X4H/FC2E8PFU/FNW2X4HFC2E8PFU.SQUARE2.jpg http://cdn.instructables.com/FNW/2X4H/FC2E8PFU/FNW2X4HFC2E8PFU.SQUARE.jpg http://cdn.instructables.com/FNW/2X4H/FC2E8PFU/FNW2X4HFC2E8PFU.SMALL.jpg BobbyMike Nothing fancy here, just a quick and easy way to build a nice storage unit for your random orbital hook and loop sanding discs. Storing your discs in this way greatly improves your efficiency. An orderly shop not only looks nice it helps to keep you focussed on making things instead of scrounging ...
By: BobbyMike

Continue Reading »]]>
Sat, 2 Feb 2008 12:17:37 PST
Treehouse http://www.instructables.com/id/Treehouse/
Treehouse - More DIY How To Projects]]> http://cdn.instructables.com/FNI/9WKT/TYSEP27SHQH/FNI9WKTTYSEP27SHQH.SQUARE2.jpg http://cdn.instructables.com/FNI/9WKT/TYSEP27SHQH/FNI9WKTTYSEP27SHQH.SQUARE.jpg http://cdn.instructables.com/FNI/9WKT/TYSEP27SHQH/FNI9WKTTYSEP27SHQH.SMALL.jpg shawnconna A big old-growth redwood stump had steps carved into it when we bought the place. Visions of a fabulous tree deck danced in our heads... Build the framework We used the trees around the stump (the fairy ring) as the main supports for the very sturdy framing. Our research showed that drilling ALL ...
By: shawnconna

Continue Reading »]]>
Fri, 9 Dec 2005 01:47:08 PST