Instructables: exploring - video - workshop http://www.instructables.com Thu, 17 Apr 2014 04:10:24 PDT BLOX v1.01 $35 welded steel truck rack http://www.instructables.com/id/35-welded-steel-truck-rack/ http://cdn.instructables.com/FPB/N8K4/HU0GLFHN/FPBN8K4HU0GLFHN.SQUARE2.jpg http://cdn.instructables.com/FPB/N8K4/HU0GLFHN/FPBN8K4HU0GLFHN.SQUARE.jpg http://cdn.instructables.com/FPB/N8K4/HU0GLFHN/FPBN8K4HU0GLFHN.SMALL.jpg timsway i wanted a small, simple lumber rack that i could easily install and uninstall on my 72 chevy pickup. this cost $35 for 4, 8-foot 1 3/8" steel square tube (and a couple scraps of flat steel). i put some info in the video on cuts and such, but you'll need to measure your truck and may have to adjust....
By: timsway

Continue Reading »]]>
Mon, 14 Apr 2014 18:10:29 PDT
Solder Mask Repair Tips & Techniques http://www.instructables.com/id/Solder-Mask-Repair-Tips-Techniques/ http://cdn.instructables.com/FOO/5421/HTZ42RFH/FOO5421HTZ42RFH.SQUARE2.jpg http://cdn.instructables.com/FOO/5421/HTZ42RFH/FOO5421HTZ42RFH.SQUARE.jpg http://cdn.instructables.com/FOO/5421/HTZ42RFH/FOO5421HTZ42RFH.SMALL.jpg bwetman This "How to Video" explains the StencilMask(TM) repair process in which solder mask is repaired very quickly. After cleaning up the area, the stencil is aligned and placed over the damaged area. Solder mask is then squeegeed through the apertures of the stencil and then the mask is cured (UV or the...
By: bwetman

Continue Reading »]]>
Mon, 14 Apr 2014 01:45:11 PDT
How to replace iphone 5 screen http://www.instructables.com/id/How-to-replace-iphone-5-screen/ http://cdn.instructables.com/FBQ/9I8T/HTX6O8BN/FBQ9I8THTX6O8BN.SQUARE2.jpg http://cdn.instructables.com/FBQ/9I8T/HTX6O8BN/FBQ9I8THTX6O8BN.SQUARE.jpg http://cdn.instructables.com/FBQ/9I8T/HTX6O8BN/FBQ9I8THTX6O8BN.SMALL.jpg andrew mcneil IPhone 5 screen replacement. Step by step instructional video, showing you how to replace the screen/digitizer, and how to put it all back together again. The iPhone 5 screen is a complete screen assembly which means that you cannot replace just the LCD or the digitizer. The screen and digitizer are...
By: andrew mcneil

Continue Reading »]]>
Sun, 13 Apr 2014 00:30:29 PDT
How to fix a loose cush drive on a motorcycle for cheap. http://www.instructables.com/id/How-to-fix-a-loose-cush-drive-on-a-motorcycle-for-/ http://cdn.instructables.com/FCX/C7X9/HTUV9BIP/FCXC7X9HTUV9BIP.SQUARE2.jpg http://cdn.instructables.com/FCX/C7X9/HTUV9BIP/FCXC7X9HTUV9BIP.SQUARE.jpg http://cdn.instructables.com/FCX/C7X9/HTUV9BIP/FCXC7X9HTUV9BIP.SMALL.jpg earz_cd Many modern motorcycles have rubber cushions built into the rear wheel to reduce stress of engine torque from damaging other components during gear or throttle changes. Over time, the rubber cushions will begin to wear and will loosen up. This will allow the sprocket to move independently from the w...
By: earz_cd

Continue Reading »]]>
Fri, 11 Apr 2014 06:47:02 PDT
I sketch a interior of a bathroom impromptu http://www.instructables.com/id/I-sketch-a-interior-of-a-bathroom-impromptu/ http://cdn.instructables.com/FMY/4UZ9/HTUFCI61/FMY4UZ9HTUFCI61.SQUARE2.jpg http://cdn.instructables.com/FMY/4UZ9/HTUFCI61/FMY4UZ9HTUFCI61.SQUARE.jpg http://cdn.instructables.com/FMY/4UZ9/HTUFCI61/FMY4UZ9HTUFCI61.SMALL.jpg ishiyasu I sketched a picture looked into bathroom from the top. I can overlook the whole room and think that it is easy to look. A disappearance point is important to this how to describe. I can express a perspective by setting a disappearance point. Let's sketch it! Please subscribe!! http://www.youtube.c...
By: ishiyasu

Continue Reading »]]>
Thu, 10 Apr 2014 22:28:36 PDT
"drill" a square hole http://www.instructables.com/id/drill-a-square-hole/ http://cdn.instructables.com/FSH/Q36O/HTS5C1IM/FSHQ36OHTS5C1IM.SQUARE2.jpg http://cdn.instructables.com/FSH/Q36O/HTS5C1IM/FSHQ36OHTS5C1IM.SQUARE.jpg http://cdn.instructables.com/FSH/Q36O/HTS5C1IM/FSHQ36OHTS5C1IM.SMALL.jpg arduinoversusevil This is a short vid showing how to make a quick and dirty broaching tool to make square holes.
By: arduinoversusevil

Continue Reading »]]>
Wed, 9 Apr 2014 10:12:01 PDT
Making a Wooden Ring http://www.instructables.com/id/Making-a-Wooden-Ring/ http://cdn.instructables.com/F1I/SDXF/HTS5AUCR/F1ISDXFHTS5AUCR.SQUARE2.jpg http://cdn.instructables.com/F1I/SDXF/HTS5AUCR/F1ISDXFHTS5AUCR.SQUARE.jpg http://cdn.instructables.com/F1I/SDXF/HTS5AUCR/F1ISDXFHTS5AUCR.SMALL.jpg Switch and Lever Rings are great, but what if you don't either have the money to buy or the knowledge to make your own silver or gold rings. You could go with plastic, but if you really want to create something which stands out I would suggest looking at more natural materials, materials such as wood. Let's get st...
By: Switch and Lever

Continue Reading »]]>
Wed, 9 Apr 2014 03:06:00 PDT
Max and Matilda ~ A (LED) Light Love Story http://www.instructables.com/id/Max-and-Matilda-A-LED-Light-Love-Story/ http://cdn.instructables.com/F9D/P1YJ/HTQN8SVM/F9DP1YJHTQN8SVM.SQUARE2.jpg http://cdn.instructables.com/F9D/P1YJ/HTQN8SVM/F9DP1YJHTQN8SVM.SQUARE.jpg http://cdn.instructables.com/F9D/P1YJ/HTQN8SVM/F9DP1YJHTQN8SVM.SMALL.jpg cdstudioNH Max and Matilda love to read, but when the daylight fades their bibliophile time sadly ends.... until Max uses his sewing and soldering skills to create a solution!! materials: - stuffie of your choice - LED's - low ohm resistor - 3.7 volt LiPo battery - tactile on/off switch - needle/thread/scis...
By: cdstudioNH

Continue Reading »]]>
Tue, 8 Apr 2014 10:17:43 PDT
Digging your own working garden or homestead well. http://www.instructables.com/id/Digging-your-own-working-garden-or-homestead-well/ http://cdn.instructables.com/F2I/872R/HTMNNCDE/F2I872RHTMNNCDE.SQUARE2.jpg http://cdn.instructables.com/F2I/872R/HTMNNCDE/F2I872RHTMNNCDE.SQUARE.jpg http://cdn.instructables.com/F2I/872R/HTMNNCDE/F2I872RHTMNNCDE.SMALL.jpg NelsonStudios Nothing is quite as basic for your homestead or your garden than the need for water.  This simple resource was essential for survival on the farm.  Not much has changed.  Despite having water piped to most of our homes the essential tools and skills necessary to get at the water beneath your feet ar...
By: NelsonStudios

Continue Reading »]]>
Sat, 5 Apr 2014 16:13:11 PDT
Making an old crate http://www.instructables.com/id/Making-an-old-crate/ http://cdn.instructables.com/F3T/4QM9/HTNO6CRX/F3T4QM9HTNO6CRX.SQUARE2.jpg http://cdn.instructables.com/F3T/4QM9/HTNO6CRX/F3T4QM9HTNO6CRX.SQUARE.jpg http://cdn.instructables.com/F3T/4QM9/HTNO6CRX/F3T4QM9HTNO6CRX.SMALL.jpg cpine522 I use some old barn wood to make a crate for the back of my vehicle.  I try to make it look old and antique the finish. Some say it looks like bacon. What do you think?  Chris Please Subscribe to My youtube Channel! http://www.youtube.com/user/TheChrisPineWorkshop Facebook:  https://www.facebook...
By: cpine522

Continue Reading »]]>
Sat, 5 Apr 2014 14:44:06 PDT
Using a sickle to cut grass. Upcycling the Neighbour's Lawn. Revaloriser la pelouse du voisin. Reciclaje el c├ęsped del vecino in HD http://www.instructables.com/id/Upcycling-the-Neighbours-Lawn-Revaloriser-la-pelou/ http://cdn.instructables.com/FOA/FO67/HTMO72TW/FOAFO67HTMO72TW.SQUARE2.jpg http://cdn.instructables.com/FOA/FO67/HTMO72TW/FOAFO67HTMO72TW.SQUARE.jpg http://cdn.instructables.com/FOA/FO67/HTMO72TW/FOAFO67HTMO72TW.SMALL.jpg Organikmechanic A simple homesteading tip and review of old tools and gadgets. We've no lawn to cut but our neighbour has and this early in the season it's growing well and will make great hay. We can dry it in the 5 Euro Green House: https://www.youtube.com/watch?v=br5sE8Pg6Vc and also use the long grass to free-r...
By: Organikmechanic

Continue Reading »]]>
Sat, 5 Apr 2014 03:51:08 PDT
Recycling coffee grounds, a Cradle to cradle system http://www.instructables.com/id/Coffee-Cycle-reusing-coffee-ground/ http://cdn.instructables.com/F5M/TCHJ/HTKXZH61/F5MTCHJHTKXZH61.SQUARE2.jpg http://cdn.instructables.com/F5M/TCHJ/HTKXZH61/F5MTCHJHTKXZH61.SQUARE.jpg http://cdn.instructables.com/F5M/TCHJ/HTKXZH61/F5MTCHJHTKXZH61.SMALL.jpg Clotilde_Destrebecq Did you know that coffee grounds could be used in your compost? Coffee grounds are an excellent garden helper, they can be directly applied on the ground or used in compost.The grounds contain useful amounts of phosphorus, potassium, minor amounts of calcium, magnesium, copper and other trace miner...
By: Clotilde_Destrebecq

Continue Reading »]]>
Thu, 3 Apr 2014 16:39:15 PDT
Woodturning-Ice Cream Scoop http://www.instructables.com/id/Woodturning-Ice-Cream-Scoop/ http://cdn.instructables.com/FD4/BO6C/HTJR0YU3/FD4BO6CHTJR0YU3.SQUARE2.jpg http://cdn.instructables.com/FD4/BO6C/HTJR0YU3/FD4BO6CHTJR0YU3.SQUARE.jpg http://cdn.instructables.com/FD4/BO6C/HTJR0YU3/FD4BO6CHTJR0YU3.SMALL.jpg HPandLOTR I used spectraply wood for this project.  Spectraply is a really cool plywood because it has a bunch of layers of different colored woods.  So when you turn it you get a really cool effect.  I used the wood river ice cream scoop kit which you may purchase here:http://www.woodcraft.com/Product/208017...
By: HPandLOTR

Continue Reading »]]>
Thu, 3 Apr 2014 05:12:32 PDT
PCB Pad Repair Dry Film Version- Soldertools.net http://www.instructables.com/id/PCB-Pad-Repair-Dry-Film-Version-Soldertoolsnet/ http://cdn.instructables.com/FTF/OH33/HTJP9VLA/FTFOH33HTJP9VLA.SQUARE2.jpg http://cdn.instructables.com/FTF/OH33/HTJP9VLA/FTFOH33HTJP9VLA.SQUARE.jpg http://cdn.instructables.com/FTF/OH33/HTJP9VLA/FTFOH33HTJP9VLA.SMALL.jpg bwetman This video is on the dry film pad repair technique per IPC 7721 standards. Professional instructors of Soldertools.net demonstrate the proper technique for the repair for PCB pads using the dry film.
By: bwetman

Continue Reading »]]>
Thu, 3 Apr 2014 00:43:29 PDT
Two story playhouse with balcony http://www.instructables.com/id/Two-story-playhouse-with-balcony/ http://cdn.instructables.com/FDN/PYZT/HTHKFXXI/FDNPYZTHTHKFXXI.SQUARE2.jpg http://cdn.instructables.com/FDN/PYZT/HTHKFXXI/FDNPYZTHTHKFXXI.SQUARE.jpg http://cdn.instructables.com/FDN/PYZT/HTHKFXXI/FDNPYZTHTHKFXXI.SMALL.jpg neetugrewal Two computer engineers with no construction experience use "Online Resources" to create a two story playhouse structure. This was in year 2012, and technology over the last 20+ years has enabled all of us to do amazing things, learn new traits, and simply speed up everything we do around each other...
By: neetugrewal

Continue Reading »]]>
Wed, 2 Apr 2014 08:38:02 PDT
Tree Shingling http://www.instructables.com/id/Tree-Shingling/ http://cdn.instructables.com/FMX/Y2YR/HTFYEDXZ/FMXY2YRHTFYEDXZ.SQUARE2.jpg http://cdn.instructables.com/FMX/Y2YR/HTFYEDXZ/FMXY2YRHTFYEDXZ.SQUARE.jpg http://cdn.instructables.com/FMX/Y2YR/HTFYEDXZ/FMXY2YRHTFYEDXZ.SMALL.jpg NelsonStudios A whimsical alternative to other methods used to cover rotten areas in trees.  This wasn't a very involved one but you get the idea never the less.
By: NelsonStudios

Continue Reading »]]>
Mon, 31 Mar 2014 21:02:39 PDT
Making a Kant Twist Clamp http://www.instructables.com/id/Making-a-Kant-Twist-Clamp/ http://cdn.instructables.com/FF2/C2RT/HTEUFUXW/FF2C2RTHTEUFUXW.SQUARE2.jpg http://cdn.instructables.com/FF2/C2RT/HTEUFUXW/FF2C2RTHTEUFUXW.SQUARE.jpg http://cdn.instructables.com/FF2/C2RT/HTEUFUXW/FF2C2RTHTEUFUXW.SMALL.jpg Switch and Lever Face it, tools are cool! Sometimes tools are so cool that you want them, regardless if they are unavailable to you. Such was the case with the Kant twist clamp. Living in Sweden these clamps are not available, and entirely unheard of, but the desire to have one was still there. Aside from being a u...
By: Switch and Lever

Continue Reading »]]>
Mon, 31 Mar 2014 13:45:53 PDT
Make a Yoda desk ornament http://www.instructables.com/id/Make-a-Yoda-desk-ornament/ http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SQUARE2.jpg http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SQUARE.jpg http://cdn.instructables.com/F08/44SW/HTEUCVZT/F0844SWHTEUCVZT.SMALL.jpg kludge77 I turn a Star Wars candy dispenser into a sage desk ornament. Master Yoda's wisdom should not be discarded so readily.. The wood is claro walnut with a wipe on poly finish.
By: kludge77

Continue Reading »]]>
Sun, 30 Mar 2014 18:18:54 PDT
Rain barrel on the cheap http://www.instructables.com/id/Rain-barrel-on-the-cheap/ http://cdn.instructables.com/FFR/LB32/HTDSOQ98/FFRLB32HTDSOQ98.SQUARE2.jpg http://cdn.instructables.com/FFR/LB32/HTDSOQ98/FFRLB32HTDSOQ98.SQUARE.jpg http://cdn.instructables.com/FFR/LB32/HTDSOQ98/FFRLB32HTDSOQ98.SMALL.jpg Twofinger This is a rain-catch barrel I made out of stuff I had and I plan to use it to water my garden.
By: Twofinger

Continue Reading »]]>
Sat, 29 Mar 2014 21:39:17 PDT
Filling raised garden bed http://www.instructables.com/id/Filling-raised-garden-bed/ http://cdn.instructables.com/FFU/3KTN/HTC69P7Z/FFU3KTNHTC69P7Z.SQUARE2.jpg http://cdn.instructables.com/FFU/3KTN/HTC69P7Z/FFU3KTNHTC69P7Z.SQUARE.jpg http://cdn.instructables.com/FFU/3KTN/HTC69P7Z/FFU3KTNHTC69P7Z.SMALL.jpg Twofinger I finally get to fill my raised bed garden with soil. I used a good "rich mix"
By: Twofinger

Continue Reading »]]>
Sat, 29 Mar 2014 08:40:33 PDT
Transplanting tomatoes http://www.instructables.com/id/Transplanting-tomatoes/ http://cdn.instructables.com/FA7/TX2J/HTC69P5S/FA7TX2JHTC69P5S.SQUARE2.jpg http://cdn.instructables.com/FA7/TX2J/HTC69P5S/FA7TX2JHTC69P5S.SQUARE.jpg http://cdn.instructables.com/FA7/TX2J/HTC69P5S/FA7TX2JHTC69P5S.SMALL.jpg Twofinger I transplanted some tomato plants to larger container to allow for stronger growth before we get ready to plant them outside.
By: Twofinger

Continue Reading »]]>
Sat, 29 Mar 2014 08:35:53 PDT
How to build a red oak longbow #7 http://www.instructables.com/id/How-to-build-a-red-oak-longbow-7/ http://cdn.instructables.com/FER/7TOP/HTBY6KBJ/FER7TOPHTBY6KBJ.SQUARE2.jpg http://cdn.instructables.com/FER/7TOP/HTBY6KBJ/FER7TOPHTBY6KBJ.SQUARE.jpg http://cdn.instructables.com/FER/7TOP/HTBY6KBJ/FER7TOPHTBY6KBJ.SMALL.jpg geronimogo In this video I show you how to shape the handle of a red oak longbow.  I chose the pistol grip design.  I use a few electric saws but it can be done with hand saws as well.
By: geronimogo

Continue Reading »]]>
Fri, 28 Mar 2014 15:20:06 PDT
Pallet Hen House Chicken Coop in under 3 mins. Poulailler palette. Gallinero paleta en 3 minutos http://www.instructables.com/id/Pallet-Hen-House-Chicken-Coop-in-under-3-mins-Poul/ http://cdn.instructables.com/F2I/HFEQ/HT9AT2IP/F2IHFEQHT9AT2IP.SQUARE2.jpg http://cdn.instructables.com/F2I/HFEQ/HT9AT2IP/F2IHFEQHT9AT2IP.SQUARE.jpg http://cdn.instructables.com/F2I/HFEQ/HT9AT2IP/F2IHFEQHT9AT2IP.SMALL.jpg Organikmechanic Stanislas has something to crow about when he and his friends finally get their hen house after months of rain. We made this hen house at Christmas but have been waiting for a few fine days to put it up. Films shows the intense interest our flock have in what goes on in the garden!
By: Organikmechanic

Continue Reading »]]>
Thu, 27 Mar 2014 07:10:56 PDT
Know How to Repair PCB Laminate http://www.instructables.com/id/How-to-Repair-PCB-Laminate/ http://cdn.instructables.com/FW0/RHOT/HT9AWUXB/FW0RHOTHT9AWUXB.SQUARE2.jpg http://cdn.instructables.com/FW0/RHOT/HT9AWUXB/FW0RHOTHT9AWUXB.SQUARE.jpg http://cdn.instructables.com/FW0/RHOT/HT9AWUXB/FW0RHOTHT9AWUXB.SMALL.jpg bwetman This video shows the PCB laminate repair process. PCB Laminate is usually damaged by poor handling or by errant tooling or by the circuit board being exposed to too much heat. This process walks you the laminate repair process. This video is brought to you by Soldertools.net instructors.
By: bwetman

Continue Reading »]]>
Wed, 26 Mar 2014 23:01:07 PDT
How to use a hammer drill to vibrate concrete to get rid of air bubbles http://www.instructables.com/id/How-to-use-a-hammer-drill-to-vibrate-concrete-to-g/ http://cdn.instructables.com/FY0/K8XY/HT7P4W55/FY0K8XYHT7P4W55.SQUARE2.jpg http://cdn.instructables.com/FY0/K8XY/HT7P4W55/FY0K8XYHT7P4W55.SQUARE.jpg http://cdn.instructables.com/FY0/K8XY/HT7P4W55/FY0K8XYHT7P4W55.SMALL.jpg gaiatechnician This significantly extends the range of what the drill can do!  I just drilled 3/4 way into a piece of 2 by 4  wood with a smaller diameter wood bit, then drilled the hammer bit into it for a really tight fit.   Next screw on  a flat piece of wood to fit the concrete  you are vibrating.  It can be w...
By: gaiatechnician

Continue Reading »]]>
Tue, 25 Mar 2014 20:29:31 PDT
Repair Scratches in Moulding or Walls http://www.instructables.com/id/Repair-Scratches-in-Moulding-or-Walls/ http://cdn.instructables.com/FDF/9HYN/HT5CUKFM/FDF9HYNHT5CUKFM.SQUARE2.jpg http://cdn.instructables.com/FDF/9HYN/HT5CUKFM/FDF9HYNHT5CUKFM.SQUARE.jpg http://cdn.instructables.com/FDF/9HYN/HT5CUKFM/FDF9HYNHT5CUKFM.SMALL.jpg rickosgood One of my cats has been scratching up the some of the moulding in my house.  This video describes how I repaired those scratches and how you can do it too! Materials used: - Wood filler - Putty knife - 320p sand paper - Matching paint - Paint brush
By: rickosgood

Continue Reading »]]>
Tue, 25 Mar 2014 10:20:00 PDT
Rainwater Harvesting / Water Collection System + Mains Pressure Pump & First Flush system DIY http://www.instructables.com/id/Best-Rainwater-Harvesting-Water-Collection-System-/ http://cdn.instructables.com/FQZ/7YJ7/HT559VU5/FQZ7YJ7HT559VU5.SQUARE2.jpg http://cdn.instructables.com/FQZ/7YJ7/HT559VU5/FQZ7YJ7HT559VU5.SQUARE.jpg http://cdn.instructables.com/FQZ/7YJ7/HT559VU5/FQZ7YJ7HT559VU5.SMALL.jpg AndrewKFletcher Eliminate Fluoride, Chlorine, Nitrates and Phosphates from your water and save lots of £$ Money ! http://operationoasis.com: A DIY Rainwater Harvesting System which provides mains pressure at the tap. This system has a 320 Watt Stainless Steel pump fitted with a Genyo Enyo Flow Controller http:...
By: AndrewKFletcher

Continue Reading »]]>
Tue, 25 Mar 2014 03:03:40 PDT
My three Compasses http://www.instructables.com/id/My-three-Compasses/ http://cdn.instructables.com/FDO/P71D/HT5YLNG5/FDOP71DHT5YLNG5.SQUARE2.jpg http://cdn.instructables.com/FDO/P71D/HT5YLNG5/FDOP71DHT5YLNG5.SQUARE.jpg http://cdn.instructables.com/FDO/P71D/HT5YLNG5/FDOP71DHT5YLNG5.SMALL.jpg cpine522 Today I make three different designs of compasses.  I have needed a compass in the shop for a long time and some recent projects this need has arisen. So today I am going to make three different types all from either plans offered by fellow youtube woodworker and one based and inspired on youtube ...
By: cpine522

Continue Reading »]]>
Mon, 24 Mar 2014 18:41:22 PDT
Dock Moto G MDF http://www.instructables.com/id/Dock-Moto-G-MDF/ http://cdn.instructables.com/FIO/FJLH/HT36T6M3/FIOFJLHHT36T6M3.SQUARE2.jpg http://cdn.instructables.com/FIO/FJLH/HT36T6M3/FIOFJLHHT36T6M3.SQUARE.jpg http://cdn.instructables.com/FIO/FJLH/HT36T6M3/FIOFJLHHT36T6M3.SMALL.jpg doliveira-1 Link to Download the archive: http://goo.gl/0JyxaL
By: doliveira-1

Continue Reading »]]>
Sat, 22 Mar 2014 18:33:26 PDT
How to Repair Damaged PCB Corner http://www.instructables.com/id/How-to-Repair-Damaged-PCB-Corner/ http://cdn.instructables.com/F9X/ONYL/HT0UBL0A/F9XONYLHT0UBL0A.SQUARE2.jpg http://cdn.instructables.com/F9X/ONYL/HT0UBL0A/F9XONYLHT0UBL0A.SQUARE.jpg http://cdn.instructables.com/F9X/ONYL/HT0UBL0A/F9XONYLHT0UBL0A.SMALL.jpg bwetman This video is on the repair of damaged corners for PCB presented by the professional instructing staff of Soldertools.net. Corners get damaged from improper handling, storage or packaging. The repair of these damaged PCB corners for multiple angles including both above and from side views is demonst...
By: bwetman

Continue Reading »]]>
Thu, 20 Mar 2014 22:52:49 PDT
Electroetching Metal(s) http://www.instructables.com/id/Electroetching-Metals/ http://cdn.instructables.com/FSZ/S0XN/HSVGJ5RF/FSZS0XNHSVGJ5RF.SQUARE2.jpg http://cdn.instructables.com/FSZ/S0XN/HSVGJ5RF/FSZS0XNHSVGJ5RF.SQUARE.jpg http://cdn.instructables.com/FSZ/S0XN/HSVGJ5RF/FSZS0XNHSVGJ5RF.SMALL.jpg Switch and Lever Sometimes we find ourselves with the need of making marks on metal, perhaps somewhat intricate marks or patterns for decorative or utilitarian purposes. While there are many ways to mark metal probably the most permanent one is to etch the metal itself, as in removing small amounts of the metal to l...
By: Switch and Lever

Continue Reading »]]>
Thu, 20 Mar 2014 03:35:28 PDT
I put wall paper!! http://www.instructables.com/id/I-put-wall-paper/ http://cdn.instructables.com/F6M/DG68/HSVGJ5D1/F6MDG68HSVGJ5D1.SQUARE2.jpg http://cdn.instructables.com/F6M/DG68/HSVGJ5D1/F6MDG68HSVGJ5D1.SQUARE.jpg http://cdn.instructables.com/F6M/DG68/HSVGJ5D1/F6MDG68HSVGJ5D1.SMALL.jpg ishiyasu I put wall paper on the wall of the room! The atmosphere of the room easily changes! Because I can tear it off, this wall paper is reliable! I use the starch paste, I am reliable in health! Please subscribe!! http://www.youtube.com/user/continentaloverseas
By: ishiyasu

Continue Reading »]]>
Thu, 20 Mar 2014 02:30:31 PDT
Toolbox Cupboard / Moon Cupboard http://www.instructables.com/id/Toolbox-Cupboard-Moon-Cupboard/ http://cdn.instructables.com/FTB/3XJO/HSVG9GGP/FTB3XJOHSVG9GGP.SQUARE2.jpg http://cdn.instructables.com/FTB/3XJO/HSVG9GGP/FTB3XJOHSVG9GGP.SQUARE.jpg http://cdn.instructables.com/FTB/3XJO/HSVG9GGP/FTB3XJOHSVG9GGP.SMALL.jpg savvas_papasavva I made a smaller mobile cupboard from the material of a lager one I had built.  As I mentioned in the previous video, I am trying to reduce my footprint in the studio.  After taking the original cupboard apart I built a smaller one, keeping the feature of a large round hole in the doors.  I also tap...
By: savvas_papasavva

Continue Reading »]]>
Mon, 17 Mar 2014 02:51:37 PDT
How To Replace a Shotgun Stock http://www.instructables.com/id/How-To-Replace-a-Shotgun-Stock/ http://cdn.instructables.com/FX2/MX9M/HSRZON44/FX2MX9MHSRZON44.SQUARE2.jpg http://cdn.instructables.com/FX2/MX9M/HSRZON44/FX2MX9MHSRZON44.SQUARE.jpg http://cdn.instructables.com/FX2/MX9M/HSRZON44/FX2MX9MHSRZON44.SMALL.jpg HowToLou I was recently given my grandfather's gun, and this is how I repaired it.  I also include a short section of how guns work.
By: HowToLou

Continue Reading »]]>
Sun, 16 Mar 2014 18:26:26 PDT
Hand made wood pen http://www.instructables.com/id/Hand-made-wood-pen/ http://cdn.instructables.com/FL9/BHB1/HSRZNWT5/FL9BHB1HSRZNWT5.SQUARE2.jpg http://cdn.instructables.com/FL9/BHB1/HSRZNWT5/FL9BHB1HSRZNWT5.SQUARE.jpg http://cdn.instructables.com/FL9/BHB1/HSRZNWT5/FL9BHB1HSRZNWT5.SMALL.jpg Twofinger This is a wood pen that I made on my lathe. It is a fun thing to learn and people enjoy them as gifts.
By: Twofinger

Continue Reading »]]>
Sun, 16 Mar 2014 09:13:55 PDT
Making a simple cut with the horizontal band saw http://www.instructables.com/id/Horizontal-band-saw/ http://cdn.instructables.com/FSQ/WLN9/HSRZMD3N/FSQWLN9HSRZMD3N.SQUARE2.jpg http://cdn.instructables.com/FSQ/WLN9/HSRZMD3N/FSQWLN9HSRZMD3N.SQUARE.jpg http://cdn.instructables.com/FSQ/WLN9/HSRZMD3N/FSQWLN9HSRZMD3N.SMALL.jpg kevin7314 Useful for cutting thicker pieces of metal, has an automatic cut off switch. I made it at techshop: http://www.techshop.ws/
By: kevin7314

Continue Reading »]]>
Sat, 15 Mar 2014 08:42:24 PDT
How to use a metal band saw, beginner http://www.instructables.com/id/How-to-use-a-metal-band-saw-beginner/ http://cdn.instructables.com/FFQ/GCYV/HSRZMCXP/FFQGCYVHSRZMCXP.SQUARE2.jpg http://cdn.instructables.com/FFQ/GCYV/HSRZMCXP/FFQGCYVHSRZMCXP.SQUARE.jpg http://cdn.instructables.com/FFQ/GCYV/HSRZMCXP/FFQGCYVHSRZMCXP.SMALL.jpg kevin7314 Remember to use high speed for soft metal and slow speed for hard. I made it at techshop: http://www.techshop.ws/
By: kevin7314

Continue Reading »]]>
Sat, 15 Mar 2014 08:31:18 PDT
How to use a pedestal grinder http://www.instructables.com/id/How-to-use-a-pedestal-grinder/ http://cdn.instructables.com/F8V/COR3/HSRZMCUG/F8VCOR3HSRZMCUG.SQUARE2.jpg http://cdn.instructables.com/F8V/COR3/HSRZMCUG/F8VCOR3HSRZMCUG.SQUARE.jpg http://cdn.instructables.com/F8V/COR3/HSRZMCUG/F8VCOR3HSRZMCUG.SMALL.jpg kevin7314 Don't hold your work off the support Move your work as you grind Useful for steel and hard metal, aluminum or soft metals will break the grinder I made it at techshop: http://www.techshop.ws/
By: kevin7314

Continue Reading »]]>
Sat, 15 Mar 2014 08:24:19 PDT
How to turn hard tool steel in a lathe http://www.instructables.com/id/How-to-turn-hard-tool-steel-in-a-lathe/ http://cdn.instructables.com/F6J/MZI5/HSRO06JO/F6JMZI5HSRO06JO.SQUARE2.jpg http://cdn.instructables.com/F6J/MZI5/HSRO06JO/F6JMZI5HSRO06JO.SQUARE.jpg http://cdn.instructables.com/F6J/MZI5/HSRO06JO/F6JMZI5HSRO06JO.SMALL.jpg arduinoversusevil I used scrap tool steel to make BIG punches and dies for a home made press.
By: arduinoversusevil

Continue Reading »]]>
Fri, 14 Mar 2014 10:57:35 PDT
Rapid motor sheave/pulley removal (HVAC) http://www.instructables.com/id/Rapid-motor-sheavepulley-removal-HVAC/ http://cdn.instructables.com/FYZ/VW7J/HSQ4BNK1/FYZVW7JHSQ4BNK1.SQUARE2.jpg http://cdn.instructables.com/FYZ/VW7J/HSQ4BNK1/FYZVW7JHSQ4BNK1.SQUARE.jpg http://cdn.instructables.com/FYZ/VW7J/HSQ4BNK1/FYZVW7JHSQ4BNK1.SMALL.jpg timbit1985 WARNING: Electricity and motors are dangerous. If you don't know how to be safe, then please don't do this. If you manage to maim, damage, kill or otherwise injure yourself. Don't blame me. I had to replace 4 or 5 pulleys in fairly short order. I filmed each step on a different pulley. I apologize ...
By: timbit1985

Continue Reading »]]>
Fri, 14 Mar 2014 00:10:38 PDT
How to use a 20" disc sander http://www.instructables.com/id/How-to-use-a-20-disc-sander/ http://cdn.instructables.com/FJ1/KJH7/HSPP6D5Q/FJ1KJH7HSPP6D5Q.SQUARE2.jpg http://cdn.instructables.com/FJ1/KJH7/HSPP6D5Q/FJ1KJH7HSPP6D5Q.SQUARE.jpg http://cdn.instructables.com/FJ1/KJH7/HSPP6D5Q/FJ1KJH7HSPP6D5Q.SMALL.jpg kevin7314 do not wear gloves place work on table and pivot with work always on table the machine determines pressure and rate of grinding remember to put work on side that is rotating into the table I made this at Techshop http://www.techshop.ws/
By: kevin7314

Continue Reading »]]>
Thu, 13 Mar 2014 14:38:20 PDT
How to make a red oak longbow #6 Tillering http://www.instructables.com/id/How-to-make-a-red-oak-longbow-6-Tillering/ http://cdn.instructables.com/FEI/N8SQ/HSNFZA3J/FEIN8SQHSNFZA3J.SQUARE2.jpg http://cdn.instructables.com/FEI/N8SQ/HSNFZA3J/FEIN8SQHSNFZA3J.SQUARE.jpg http://cdn.instructables.com/FEI/N8SQ/HSNFZA3J/FEIN8SQHSNFZA3J.SMALL.jpg geronimogo This video takes you through the tutorial on how to tiller a longbow.  It also has a link to me tillering the bow in time lapse at the end of the video. Please enjoy.
By: geronimogo

Continue Reading »]]>
Wed, 12 Mar 2014 17:31:21 PDT
How to Make a Miniature Adjustable Square http://www.instructables.com/id/How-to-Make-a-Miniature-Adjustable-Square/ http://cdn.instructables.com/FFT/XY7R/HSM55HGF/FFTXY7RHSM55HGF.SQUARE2.jpg http://cdn.instructables.com/FFT/XY7R/HSM55HGF/FFTXY7RHSM55HGF.SQUARE.jpg http://cdn.instructables.com/FFT/XY7R/HSM55HGF/FFTXY7RHSM55HGF.SMALL.jpg Switch and Lever How to Make a Miniature Adjustable Square In the workshop you oftentimes need to make sure things are square, meaning that a certain corner is right angled. Sometimes the things you need to check are small, which makes using a big square somewhat of a hassle. If you have access to the right machines...
By: Switch and Lever

Continue Reading »]]>
Wed, 12 Mar 2014 13:54:59 PDT
Pencil Spin Top http://www.instructables.com/id/Pencil-Spin-Top/ http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SQUARE2.jpg http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SQUARE.jpg http://cdn.instructables.com/FKO/U4LY/HSM50JYN/FKOU4LYHSM50JYN.SMALL.jpg kludge77 This is a piece of sycamore turned to a top shape. You then insert a pencil and spin it up. I used 1/4 copper collars to give the pencil a tight grip. It draws cool circles and shortening or lengthening the pencil will give it different paths as it alters the center of gravity.
By: kludge77

Continue Reading »]]>
Tue, 11 Mar 2014 07:52:47 PDT
White Oak Benches http://www.instructables.com/id/White-Oak-Benches/ http://cdn.instructables.com/FMQ/D5MU/HSM522QF/FMQD5MUHSM522QF.SQUARE2.jpg http://cdn.instructables.com/FMQ/D5MU/HSM522QF/FMQD5MUHSM522QF.SQUARE.jpg http://cdn.instructables.com/FMQ/D5MU/HSM522QF/FMQD5MUHSM522QF.SMALL.jpg cpine522 I make some benches for our kitchen table.  White oak is the material and it turns out great. Please view and tell me what you think. I like to hear others opinions and comments.  Chris
By: cpine522

Continue Reading »]]>
Mon, 10 Mar 2014 21:32:23 PDT
Lathe Turned Door Stops http://www.instructables.com/id/Lathe-Turned-Door-Stops/ http://cdn.instructables.com/FBW/MMUZ/HSLQR3GD/FBWMMUZHSLQR3GD.SQUARE2.jpg http://cdn.instructables.com/FBW/MMUZ/HSLQR3GD/FBWMMUZHSLQR3GD.SQUARE.jpg http://cdn.instructables.com/FBW/MMUZ/HSLQR3GD/FBWMMUZHSLQR3GD.SMALL.jpg kludge77 A set of turned doorstops.  They are glued up from a few cherry and walnut leftovers. I  turn them on the lathe and cut them up at the band saw. I've tested them out. They do in fact stop doors...
By: kludge77

Continue Reading »]]>
Mon, 10 Mar 2014 09:43:44 PDT
episode 6: make your own zero emissions chairs http://www.instructables.com/id/episode-6-make-your-own-zero-emissions-chairs/ http://cdn.instructables.com/FCW/4N6N/HSLQQYJM/FCW4N6NHSLQQYJM.SQUARE2.jpg http://cdn.instructables.com/FCW/4N6N/HSLQQYJM/FCW4N6NHSLQQYJM.SQUARE.jpg http://cdn.instructables.com/FCW/4N6N/HSLQQYJM/FCW4N6NHSLQQYJM.SMALL.jpg timsway in the final episode of my series on reclaiming your own wood and making things with it, i make a pair of simple indoor/outdoor chairs using only basic hand tools and no electricity). i didn't make a cut ist at the end of this video, but for one chair you basically need: (2) 30"X 2 or 3 inch ish b...
By: timsway

Continue Reading »]]>
Mon, 10 Mar 2014 06:31:39 PDT
Turning a plywood bracelet - PIP http://www.instructables.com/id/Turning-a-plywood-bracelet-PIP/ http://cdn.instructables.com/FOF/LBTG/HSKFE3O5/FOFLBTGHSKFE3O5.SQUARE2.jpg http://cdn.instructables.com/FOF/LBTG/HSKFE3O5/FOFLBTGHSKFE3O5.SQUARE.jpg http://cdn.instructables.com/FOF/LBTG/HSKFE3O5/FOFLBTGHSKFE3O5.SMALL.jpg Fool4peppers Creating a bracelet from cabinet grade plywood. Video has two angle view of most of the turning.
By: Fool4peppers

Continue Reading »]]>
Sun, 9 Mar 2014 15:59:00 PDT
Woodturning ~ A Mallet for the Shop http://www.instructables.com/id/Woodturning-A-Mallet-for-the-Shop/ http://cdn.instructables.com/FBU/UC9N/HSHQQVRU/FBUUC9NHSHQQVRU.SQUARE2.jpg http://cdn.instructables.com/FBU/UC9N/HSHQQVRU/FBUUC9NHSHQQVRU.SQUARE.jpg http://cdn.instructables.com/FBU/UC9N/HSHQQVRU/FBUUC9NHSHQQVRU.SMALL.jpg HPandLOTR Every woodworker or handyman needs a good strong mallet.  They're really not that hard to make either.  All I used was a Poplar dowel and a block of Hickory.  I know that Hickory is one of those woods that you never see people turn but I had a huge log of it laying around and I decided to make it in...
By: HPandLOTR

Continue Reading »]]>
Sat, 8 Mar 2014 05:28:14 PST
Protecing Paint From Freezing http://www.instructables.com/id/Protecing-Paint-From-Freezing/ http://cdn.instructables.com/F7X/UNPZ/HSG26TEP/F7XUNPZHSG26TEP.SQUARE2.jpg http://cdn.instructables.com/F7X/UNPZ/HSG26TEP/F7XUNPZHSG26TEP.SQUARE.jpg http://cdn.instructables.com/F7X/UNPZ/HSG26TEP/F7XUNPZHSG26TEP.SMALL.jpg NelsonStudios Have an unheated shop or garage?  Want to keep your paint or welding rod warm and dry?  Use an old refrigerator!  You don't have to remove the compressor or the freon, just leave the unit as is and instal a incandescent light bulb of 40w or less hooked up to an old wall thermostat in the bottom.  Wh...
By: NelsonStudios

Continue Reading »]]>
Thu, 6 Mar 2014 08:33:07 PST