Instructables: exploring - video - leds http://www.instructables.com Wed, 20 Aug 2014 14:10:17 PDT BLOX v1.01 How to not get your LED legs mixed up :D http://www.instructables.com/id/How-to-not-get-your-LED-legs-mixed-up-D/ http://cdn.instructables.com/FGH/K7NF/HUK2EPKG/FGHK7NFHUK2EPKG.SQUARE2.jpg http://cdn.instructables.com/FGH/K7NF/HUK2EPKG/FGHK7NFHUK2EPKG.SQUARE.jpg http://cdn.instructables.com/FGH/K7NF/HUK2EPKG/FGHK7NFHUK2EPKG.SMALL.jpg cdstudioNH Love sewing with LED's? Hate trying to keep the polarities straight? Here is an easy way to never get them mixed up again... especially if you like to daydream... or have had a mixed drink. : ) Just another video example of me being silly.
By: cdstudioNH

Continue Reading »]]>
Mon, 28 Apr 2014 20:45:57 PDT
LED studded bracelet project, no soldering! - experiment http://www.instructables.com/id/LED-studded-bracelet-project-no-soldering-experime/ http://cdn.instructables.com/FF4/ONOJ/HU54MS8O/FF4ONOJHU54MS8O.SQUARE2.jpg http://cdn.instructables.com/FF4/ONOJ/HU54MS8O/FF4ONOJHU54MS8O.SQUARE.jpg http://cdn.instructables.com/FF4/ONOJ/HU54MS8O/FF4ONOJHU54MS8O.SMALL.jpg cdstudioNH I wanted to see if I could create a LED studded leather bracelet that functioned well and was somewhat attractive. I used scrap watch parts, light grey leather, 10 red LED's, a low ohm resistor, E6000 and machine stitched it all up with conductive thread. materials: leather or leather bracele...
By: cdstudioNH

Continue Reading »]]>
Fri, 18 Apr 2014 08:55:33 PDT
Project LED dog collar. Adjustable! Velcro!! Interchangeable!!! Fun... http://www.instructables.com/id/Project-LED-dog-collar-Adjustable-Velcro-Interchan/ http://cdn.instructables.com/FYM/MABP/HU54MI1N/FYMMABPHU54MI1N.SQUARE2.jpg http://cdn.instructables.com/FYM/MABP/HU54MI1N/FYMMABPHU54MI1N.SQUARE.jpg http://cdn.instructables.com/FYM/MABP/HU54MI1N/FYMMABPHU54MI1N.SMALL.jpg cdstudioNH I've taken apart a store-bought collar and transformed it into a little something different. : ) materials: cheap dog collar(for parts) velcro(any color or width, at least 2 feet of it) LED's(I used 11) battery(I used coin cell with holder, 3v) conductive sewing thread needle, machine, scissors, p...
By: cdstudioNH

Continue Reading »]]>
Fri, 18 Apr 2014 08:19:25 PDT
Fantasterrific Violin Generator -Cool Led Flashlight http://www.instructables.com/id/Fantasterrific-Violin-Generator-Cool-Led-Flashligh/ http://cdn.instructables.com/FTO/N4GO/HTN3JYAP/FTON4GOHTN3JYAP.SQUARE2.jpg http://cdn.instructables.com/FTO/N4GO/HTN3JYAP/FTON4GOHTN3JYAP.SQUARE.jpg http://cdn.instructables.com/FTO/N4GO/HTN3JYAP/FTON4GOHTN3JYAP.SMALL.jpg macobt Join to American Hacker:http://www.youtube.com/subscription_center?add_user=macobt My blog:http://macoprojects.blogspot.com Facebook:https://www.facebook.com/pages/Maco-projects/460101797400258
By: macobt

Continue Reading »]]>
Sat, 5 Apr 2014 14:53:33 PDT
How-To InfraRed Led flashlight http://www.instructables.com/id/How-To-InfraRed-Led-flashlight/ http://cdn.instructables.com/FXN/F26V/HSHDS7P3/FXNF26VHSHDS7P3.SQUARE2.jpg http://cdn.instructables.com/FXN/F26V/HSHDS7P3/FXNF26VHSHDS7P3.SQUARE.jpg http://cdn.instructables.com/FXN/F26V/HSHDS7P3/FXNF26VHSHDS7P3.SMALL.jpg klīvmanis Hi Instructables ! Just whanted to share my how-to tutorial about infrared led flashlight. Nothing complicated just replace original light bulb with 4 8mm IR led's . Its really fun project to make and best parts is that light can be seen only by cameras ,so you can take fotos at night and noone  wil...
By: klīvmanis

Continue Reading »]]>
Fri, 7 Mar 2014 12:00:06 PST
Optical Illusion LED Time Table http://www.instructables.com/id/Optical-Illusion-LED-Time-Table/ http://cdn.instructables.com/F5U/46Y4/HSG26U8A/F5U46Y4HSG26U8A.SQUARE2.jpg http://cdn.instructables.com/F5U/46Y4/HSG26U8A/F5U46Y4HSG26U8A.SQUARE.jpg http://cdn.instructables.com/F5U/46Y4/HSG26U8A/F5U46Y4HSG26U8A.SMALL.jpg NelsonStudios Bend time to your will with this fun illuminated clock table!  The diffuser creates an illusion where time itself seems to twist and churn as you look at it.  The LED ring makes it look as if there is a laser pyramid rising from the table top... except that when you reach for it it flips around and ...
By: NelsonStudios

Continue Reading »]]>
Thu, 6 Mar 2014 08:49:19 PST
DIY: Amazing Jar Lantern http://www.instructables.com/id/DIY-Amazing-Jar-Lantern/ http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SQUARE2.jpg http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SQUARE.jpg http://cdn.instructables.com/FDG/1TGX/HRP9EXRX/FDG1TGXHRP9EXRX.SMALL.jpg macobt Jar Lantern that run on battery,inside there is one White Led Diode,2 AAA bateries and on  lid there is handle and switch. Join to American Hacker:http://www.youtube.com/subscription_center?add_user=macobt
By: macobt

Continue Reading »]]>
Sat, 15 Feb 2014 14:35:45 PST
8000 lumen led flashlite http://www.instructables.com/id/8000-lumen-led-flashlite/ http://cdn.instructables.com/FC9/4O2L/HQQLL41W/FC94O2LHQQLL41W.SQUARE2.jpg http://cdn.instructables.com/FC9/4O2L/HQQLL41W/FC94O2LHQQLL41W.SQUARE.jpg http://cdn.instructables.com/FC9/4O2L/HQQLL41W/FC94O2LHQQLL41W.SMALL.jpg jayandersons Making a very bright led flash light. use's lithium 18650 battery's . parts list. LED http://dx.com/p/prime-100w-8000lm-led-emitter-metal-plate-pure-white-42806~r.87047508 10,000 led dx.com/p/diy-100w-10000lm-6500k-white-light-9-led-module-silver-dc-32-34v-156290#.UuWJ8WfnaUk~r.87047508 Batt...
By: jayandersons

Continue Reading »]]>
Wed, 22 Jan 2014 13:26:19 PST
UberCube X4- The Benchtop LED Cube http://www.instructables.com/id/UberCube-X4-The-benchtop-LED-Cube/ http://cdn.instructables.com/F5G/4E4M/HQQIJT3R/F5G4E4MHQQIJT3R.SQUARE2.jpg http://cdn.instructables.com/F5G/4E4M/HQQIJT3R/F5G4E4MHQQIJT3R.SQUARE.jpg http://cdn.instructables.com/F5G/4E4M/HQQIJT3R/F5G4E4MHQQIJT3R.SMALL.jpg indiantinker I always wanted to build LED Cubes but it took me a while to figure how to make one which is good looking and serves the purpose as a decorative piece on my workbench. So, I made a simple 4x4x4 LED Cube using TI`s MSP430 microcontroller and other ICs i ordered entirely from TIs Free Sample Program. ...
By: indiantinker

Continue Reading »]]>
Wed, 22 Jan 2014 06:44:12 PST
Iron Man Arc Reactor With Working Lights http://www.instructables.com/id/Iron-Man-Arc-Reactor-With-Working-Lights/ http://cdn.instructables.com/F9F/UEX6/HPT950HO/F9FUEX6HPT950HO.SQUARE2.jpg http://cdn.instructables.com/F9F/UEX6/HPT950HO/F9FUEX6HPT950HO.SQUARE.jpg http://cdn.instructables.com/F9F/UEX6/HPT950HO/F9FUEX6HPT950HO.SMALL.jpg Guaia14 Some Techniques to Create a Working Arc Reactor With LED's
By: Guaia14

Continue Reading »]]>
Tue, 31 Dec 2013 13:10:35 PST
Why buy a festive card for a friend or your family when you can make one? What if you could make one full of LEDs, batteries and the art work itself was conductive? http://www.instructables.com/id/Why-buy-a-festive-card-for-a-friend-or-your-family/ http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SQUARE2.jpg http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SQUARE.jpg http://cdn.instructables.com/FWX/6W4V/HPDB2ARG/FWX6W4VHPDB2ARG.SMALL.jpg techwillsaveus Why buy a festive card for a friend or your family when you can make one? What if you could make one full of LEDs, batteries and the art work itself was conductive? This DIY kit comes with Bare Conductive paint - a multipurpose electrically conductive material, 6 LED's, 3 button cell betteries, a se...
By: techwillsaveus

Continue Reading »]]>
Thu, 19 Dec 2013 07:48:42 PST
4X4X4 LED Cube Construction http://www.instructables.com/id/4X4X4-LED-Cube-Construction/ http://cdn.instructables.com/F3Q/TQIP/HRPSXP3X/F3QTQIPHRPSXP3X.SQUARE2.jpg http://cdn.instructables.com/F3Q/TQIP/HRPSXP3X/F3QTQIPHRPSXP3X.SQUARE.jpg http://cdn.instructables.com/F3Q/TQIP/HRPSXP3X/F3QTQIPHRPSXP3X.SMALL.jpg misperry In this video I will be constructing the LED cube. I will show how to bend the LED leads as well as how to solder it all together. Great link for information on how to do this as well as a purchasable kit that has everything you need to build one is listed below. LED Cube http://www.imagesco.com/l...
By: misperry

Continue Reading »]]>
Sat, 14 Dec 2013 21:37:54 PST
Using scrolling LED badges as Christmas tags! BTW, they are BestBuy giftcards! http://www.instructables.com/id/Using-LED-badges-as-Christmas-tags-BTW-they-double/ http://cdn.instructables.com/FP4/DBKL/HPAOZ1J9/FP4DBKLHPAOZ1J9.SQUARE2.jpg http://cdn.instructables.com/FP4/DBKL/HPAOZ1J9/FP4DBKLHPAOZ1J9.SQUARE.jpg http://cdn.instructables.com/FP4/DBKL/HPAOZ1J9/FP4DBKLHPAOZ1J9.SMALL.jpg one49th First of all, this Instructable isn't a step-by-step from-the-ground-up creation or even a hack.   Its more of a ... re-purposing, I guess.  Ok, ok.  Lets just say it's a cool use of technology. For several years Best Buy sold very unique Holiday gift cards: they doubled as some sort of electronic...
By: one49th

Continue Reading »]]>
Sat, 14 Dec 2013 19:40:27 PST
How to make led flash to music V2 http://www.instructables.com/id/How-to-make-led-flash-to-music-V2/ http://cdn.instructables.com/FRK/HR6V/HOUG7R0K/FRKHR6VHOUG7R0K.SQUARE2.jpg http://cdn.instructables.com/FRK/HR6V/HOUG7R0K/FRKHR6VHOUG7R0K.SQUARE.jpg http://cdn.instructables.com/FRK/HR6V/HOUG7R0K/FRKHR6VHOUG7R0K.SMALL.jpg klīvmanis Hi instructables! So this time i tought it coud be nice to make V2 of my previous  version ,but this time littlebit difrent with led lights and tip 31 transistor . Enjoy! ;)
By: klīvmanis

Continue Reading »]]>
Fri, 6 Dec 2013 12:17:37 PST
Generating Power From Tea Cup http://www.instructables.com/id/Generating-Power-From-Tea-Cup/ http://cdn.instructables.com/F9X/B06L/HOTIZPV2/F9XB06LHOTIZPV2.SQUARE2.jpg http://cdn.instructables.com/F9X/B06L/HOTIZPV2/F9XB06LHOTIZPV2.SQUARE.jpg http://cdn.instructables.com/F9X/B06L/HOTIZPV2/F9XB06LHOTIZPV2.SMALL.jpg macobt Light up a led with thermoelectric genertor-peltier. Subscribe to my YOUTUBE channel:http://www.youtube.com/subscription_center?add_user=macobt
By: macobt

Continue Reading »]]>
Thu, 5 Dec 2013 00:51:23 PST
The Templar's Visage: A FULL-COLOR LED DJ MASK http://www.instructables.com/id/The-Templars-Visage-A-FULL-COLOR-LED-DJ-MASK/ http://cdn.instructables.com/FGI/NW5T/HO7XGCVP/FGINW5THO7XGCVP.SQUARE2.jpg http://cdn.instructables.com/FGI/NW5T/HO7XGCVP/FGINW5THO7XGCVP.SQUARE.jpg http://cdn.instructables.com/FGI/NW5T/HO7XGCVP/FGINW5THO7XGCVP.SMALL.jpg eXtremeSomething This project began in late April 2013, when a DJ from NYC contacted me via our Facebook page. His name, “The Templar” was not only a memorable one but one that was emphasized by the mask that he wore during his shows. I was asked if I could to add a new visual element to his mask using light. Ele...
By: eXtremeSomething

Continue Reading »]]>
Sat, 23 Nov 2013 19:07:45 PST
LED Heart Showing Real Heart Rhythms http://www.instructables.com/id/LED-Heart-Showing-Cardiac-Rhythms/ http://cdn.instructables.com/FM4/4F4P/HNVBF9AW/FM44F4PHNVBF9AW.SQUARE2.jpg http://cdn.instructables.com/FM4/4F4P/HNVBF9AW/FM44F4PHNVBF9AW.SQUARE.jpg http://cdn.instructables.com/FM4/4F4P/HNVBF9AW/FM44F4PHNVBF9AW.SMALL.jpg Tymkrs This wearable LED heart simulator pendant was inspired by my work as a cardiovascular surgical nurse as well as my love of electronics.  It simulates the electrical activity of 17 different rhythms. It is not so much a kit as it is highly over-engineered LEDs, but I hope you enjoy them anyway!  The...
By: Tymkrs

Continue Reading »]]>
Mon, 11 Nov 2013 15:54:33 PST
Blink Me Kit: Dual LED Flasher http://www.instructables.com/id/Blink-Me-Kit-Dual-LED-Flasher/ http://cdn.instructables.com/FZA/VIE8/HNVBF8Z2/FZAVIE8HNVBF8Z2.SQUARE2.jpg http://cdn.instructables.com/FZA/VIE8/HNVBF8Z2/FZAVIE8HNVBF8Z2.SQUARE.jpg http://cdn.instructables.com/FZA/VIE8/HNVBF8Z2/FZAVIE8HNVBF8Z2.SMALL.jpg Tymkrs The Blink Me is a super simple circuit from using the magic of capacitors and transistors to create a dual led flasher that can be used in anything that requires some sort of flickering light.  It’s a super easy Learn to Solder kit as well! You can find it here: https://www.tindie.com/stores/tymkrs...
By: Tymkrs

Continue Reading »]]>
Mon, 11 Nov 2013 15:31:47 PST
Make a programmable LED jack-o-lantern for Halloween! http://www.instructables.com/id/Make-a-programmable-LED-jack-o-lantern-for-Hallowe/ http://cdn.instructables.com/FJO/P7WU/HNE44MM4/FJOP7WUHNE44MM4.SQUARE2.jpg http://cdn.instructables.com/FJO/P7WU/HNE44MM4/FJOP7WUHNE44MM4.SQUARE.jpg http://cdn.instructables.com/FJO/P7WU/HNE44MM4/FJOP7WUHNE44MM4.SMALL.jpg meanpc An LED pumpkin built with: 1. TI Launchpad MSP-430 2. 5 LED's 3. 5 100 ohm resistors 4. 1 pumpkin (I used artificial) 5. a little wire and solder 6. small breadboard 7. aluminum foil and tiny cups
By: meanpc

Continue Reading »]]>
Wed, 30 Oct 2013 07:51:21 PDT
DIY Frankenstein Bulb http://www.instructables.com/id/DIY-Frankenstein-Bulb/ http://cdn.instructables.com/FQ5/2NJE/HMVJGVLC/FQ52NJEHMVJGVLC.SQUARE2.jpg http://cdn.instructables.com/FQ5/2NJE/HMVJGVLC/FQ52NJEHMVJGVLC.SQUARE.jpg http://cdn.instructables.com/FQ5/2NJE/HMVJGVLC/FQ52NJEHMVJGVLC.SMALL.jpg snow1434 Step 1.) Remove The Tab on the light Bulb  Step 2.break the insulation layer (black part)  Step 3.)  Break the fialament and pulling it out Step 4.) Add Water to wash it out if white (if clear skip step) Step 5.) Add Gel i ended up using a different gel i used a garage door lubricate instead of the ...
By: snow1434

Continue Reading »]]>
Sat, 19 Oct 2013 17:27:35 PDT
LED music sync http://www.instructables.com/id/LED-music-sync/ http://cdn.instructables.com/FHI/RTXQ/HLZRRRNH/FHIRTXQHLZRRRNH.SQUARE2.jpg http://cdn.instructables.com/FHI/RTXQ/HLZRRRNH/FHIRTXQHLZRRRNH.SQUARE.jpg http://cdn.instructables.com/FHI/RTXQ/HLZRRRNH/FHIRTXQHLZRRRNH.SMALL.jpg ahmedyasser this is a simple tutorial on how to make LED lit water bottles dance to the beat of the music hope you enjoy and leave a comment
By: ahmedyasser

Continue Reading »]]>
Sat, 28 Sep 2013 06:03:58 PDT
Toilet Paper Roll Spooky Eyes http://www.instructables.com/id/Toilet-Paper-Roll-Spooky-Eyes/ http://cdn.instructables.com/F5B/F1MC/HLZREWEX/F5BF1MCHLZREWEX.SQUARE2.jpg http://cdn.instructables.com/F5B/F1MC/HLZREWEX/F5BF1MCHLZREWEX.SQUARE.jpg http://cdn.instructables.com/F5B/F1MC/HLZREWEX/F5BF1MCHLZREWEX.SMALL.jpg chickenparmi Halloween is getting closer and closer, so to celebrate, let's make spooky stuff! This is the first part, in a multiple part special series, where I will build things that are spooky. In this video I show you how to make some really spooky looking glowing eyes made out of some basic materials.
By: chickenparmi

Continue Reading »]]>
Thu, 26 Sep 2013 21:55:20 PDT
Awesome RC LED light for your RC car http://www.instructables.com/id/Awesome-RC-LED-light-for-your-RC-car/ http://cdn.instructables.com/FLH/PNGQ/HLSHH5JP/FLHPNGQHLSHH5JP.SQUARE2.jpg http://cdn.instructables.com/FLH/PNGQ/HLSHH5JP/FLHPNGQHLSHH5JP.SQUARE.jpg http://cdn.instructables.com/FLH/PNGQ/HLSHH5JP/FLHPNGQHLSHH5JP.SMALL.jpg dagelias Hi y'all!  this is a project I had a while ago, but did not 100% finish it. Now I have, and it is time for YOU to do the same ;)  First i was looking at something like this: http://www.hobbypartz.com/41p-led-lightkit.html But then I decided to make it myself.. ;) Ask if there is anything, I'll an...
By: dagelias

Continue Reading »]]>
Sat, 21 Sep 2013 03:12:44 PDT
free energy from rgb leds serially http://www.instructables.com/id/free-energy-from-rgb-leds-serially/ http://cdn.instructables.com/FHD/UGJ3/HLSHGTU0/FHDUGJ3HLSHGTU0.SQUARE2.jpg http://cdn.instructables.com/FHD/UGJ3/HLSHGTU0/FHDUGJ3HLSHGTU0.SQUARE.jpg http://cdn.instructables.com/FHD/UGJ3/HLSHGTU0/FHDUGJ3HLSHGTU0.SMALL.jpg omunozb 8 rgb leds (common cathode) serially, sun, meter..... outputs 7 volts dc. rgb led like solar cells...... it works. :) face up the sun and tilt it 35-40 degrees.
By: omunozb

Continue Reading »]]>
Fri, 20 Sep 2013 05:36:18 PDT
mod that rock candy xbox 360 controller! fun and easy! http://www.instructables.com/id/mod-that-rock-candy-xbox-360-controller-fun-and-e/ http://cdn.instructables.com/FX8/FDFP/HKBG6Y43/FX8FDFPHKBG6Y43.SQUARE2.jpg http://cdn.instructables.com/FX8/FDFP/HKBG6Y43/FX8FDFPHKBG6Y43.SQUARE.jpg http://cdn.instructables.com/FX8/FDFP/HKBG6Y43/FX8FDFPHKBG6Y43.SMALL.jpg out-of-the-box everything is in the video
By: out-of-the-box

Continue Reading »]]>
Fri, 16 Aug 2013 16:43:30 PDT
RGB LED Bike Lighting http://www.instructables.com/id/RGB-LED-Bike-Lighting/ http://cdn.instructables.com/FAH/A8I3/HJKC67CB/FAHA8I3HJKC67CB.SQUARE2.jpg http://cdn.instructables.com/FAH/A8I3/HJKC67CB/FAHA8I3HJKC67CB.SQUARE.jpg http://cdn.instructables.com/FAH/A8I3/HJKC67CB/FAHA8I3HJKC67CB.SMALL.jpg l1_am This project is a simple way to light up your bike using off the shelf LED lights. I used IKEA decorative lighting bars, which came with a small control box. The controls include a colour wheel, fade, and colour flash modes. I used some Sugru to waterproof the ends of the otherwise enclosed light st...
By: l1_am

Continue Reading »]]>
Fri, 26 Jul 2013 13:17:37 PDT
Cool Led Infinity Mirror http://www.instructables.com/id/Cool-Led-Infinity-Mirror/ http://cdn.instructables.com/FCJ/9RTX/HJAHF6T2/FCJ9RTXHJAHF6T2.SQUARE2.jpg http://cdn.instructables.com/FCJ/9RTX/HJAHF6T2/FCJ9RTXHJAHF6T2.SQUARE.jpg http://cdn.instructables.com/FCJ/9RTX/HJAHF6T2/FCJ9RTXHJAHF6T2.SMALL.jpg macobt Led infinity mirror that I make with some materials like mirror from old hard drive,leds,plastic mirror sheet and battery holder. Make sure you subscribe for more awesome videos from the macobt projects! Subscribe to my YOUTUBE channel:http://www.youtube.com/subscription_center?add_user=macobt My b...
By: macobt

Continue Reading »]]>
Mon, 22 Jul 2013 11:25:01 PDT
How to Measure Spectrum of T5 fluorescent lamps http://www.instructables.com/id/How-to-Measure-Spectrum-of-T5-fluorescent-lamps/ http://cdn.instructables.com/FMA/E74H/HJAHF4NA/FMAE74HHJAHF4NA.SQUARE2.jpg http://cdn.instructables.com/FMA/E74H/HJAHF4NA/FMAE74HHJAHF4NA.SQUARE.jpg http://cdn.instructables.com/FMA/E74H/HJAHF4NA/FMAE74HHJAHF4NA.SMALL.jpg beamqlaser Here we use the B2000 Miniature Fiber Optic Spectrometer to measure the Spectrum of T5 fluorescent lamps 1 Connect the SMA905 fiber sensor to B2000, the fiber sensor will collect the light source. 2 Connect B2000 to your computer with SMA905 fiber 3 Turn on the T5 fluorescent lamps 4 Open the B2000...
By: beamqlaser

Continue Reading »]]>
Sun, 21 Jul 2013 19:41:43 PDT
DIY bike-light system http://www.instructables.com/id/DIY-bike-light-system/ http://cdn.instructables.com/FUW/DCN0/HIWHR6E9/FUWDCN0HIWHR6E9.SQUARE2.jpg http://cdn.instructables.com/FUW/DCN0/HIWHR6E9/FUWDCN0HIWHR6E9.SQUARE.jpg http://cdn.instructables.com/FUW/DCN0/HIWHR6E9/FUWDCN0HIWHR6E9.SMALL.jpg UnseenLegionsDIY   Equipment used: Soldering iron and solder Hot glue-gun and glue Parts you'll need: Thin cardboard, or poster-board 5 super bright white LEDs  5 super bright red LEDs (or standard LEDs if you don't have cheap/free acess to super brights. I scavennged all of my parts except the resistors) 2 220Oh...
By: UnseenLegionsDIY

Continue Reading »]]>
Fri, 12 Jul 2013 01:27:22 PDT
How to make ''The Prototype'' mask http://www.instructables.com/id/How-to-make-The-Prototype-mask/ http://cdn.instructables.com/FVL/JVJK/HHJOM9JZ/FVLJVJKHHJOM9JZ.SQUARE2.jpg http://cdn.instructables.com/FVL/JVJK/HHJOM9JZ/FVLJVJKHHJOM9JZ.SQUARE.jpg http://cdn.instructables.com/FVL/JVJK/HHJOM9JZ/FVLJVJKHHJOM9JZ.SMALL.jpg macobt I was inspired by the movie ''The Prototype'' to make this mask. Paper strips and mix of water and flour is the main stuf to make this mask. I use old halogen bulbs and inside them I putt leds conected to battery with switch. Make sure you subscribe for more awesome videos from the macobt projects!...
By: macobt

Continue Reading »]]>
Thu, 6 Jun 2013 01:12:59 PDT
How to make Uncle Fester Magic Light Bulb http://www.instructables.com/id/How-to-make-Uncle-Fester-Magic-Light-Bulb/ http://cdn.instructables.com/F22/MDK4/HH2VY0GC/F22MDK4HH2VY0GC.SQUARE2.jpg http://cdn.instructables.com/F22/MDK4/HH2VY0GC/F22MDK4HH2VY0GC.SQUARE.jpg http://cdn.instructables.com/F22/MDK4/HH2VY0GC/F22MDK4HH2VY0GC.SMALL.jpg macobt I was inspired by TV show ''Adams Family'' where Uncle Fester light a bulb with his body,so I decide to make magic light bulb that lights when you want. You will need basic skills of soldering some materials like Leds,resistor,reed switch and 23A 12 volt battery. Make sure you subscribe for more a...
By: macobt

Continue Reading »]]>
Sun, 2 Jun 2013 09:56:32 PDT
Super Simple Adjustable LED Driver or Laser Driver http://www.instructables.com/id/Super-Simple-Adjustable-LED-Driver-or-Laser-Driver/ http://cdn.instructables.com/F6I/EM5O/HGU2EFLV/F6IEM5OHGU2EFLV.SQUARE2.jpg http://cdn.instructables.com/F6I/EM5O/HGU2EFLV/F6IEM5OHGU2EFLV.SQUARE.jpg http://cdn.instructables.com/F6I/EM5O/HGU2EFLV/F6IEM5OHGU2EFLV.SMALL.jpg macobt Make your own driver for your led or laser diode,schematic is super simple just 2 components LM317 voltage regulator and adjustable trim pot 50 ohms. The LM317 will be the current regulator,with trimm pot we gona set the desire current. Make sure you subscribe for more awesome videos from the macob...
By: macobt

Continue Reading »]]>
Mon, 20 May 2013 14:07:28 PDT
Touchscreen RGB Light Controller http://www.instructables.com/id/Touchscreen-RGB-Light-Controller/ http://cdn.instructables.com/F44/0KRW/HFSHU19N/F440KRWHFSHU19N.SQUARE2.jpg http://cdn.instructables.com/F44/0KRW/HFSHU19N/F440KRWHFSHU19N.SQUARE.jpg http://cdn.instructables.com/F44/0KRW/HFSHU19N/F440KRWHFSHU19N.SMALL.jpg gfwilliams For our wedding we really wanted some lighting that could change colour in a slow, controlled way. It also needed to change between predefined colours that fitted with our colour scheme. We couldn't find a cheap way of doing this, so we decided to make something! This is the result! You'll need: A...
By: gfwilliams

Continue Reading »]]>
Wed, 1 May 2013 08:08:06 PDT
How to convert charger into night led lamp http://www.instructables.com/id/How-to-convert-charger-into-night-led-lamp/ http://cdn.instructables.com/FI3/3D4C/HFSHT8KP/FI33D4CHFSHT8KP.SQUARE2.jpg http://cdn.instructables.com/FI3/3D4C/HFSHT8KP/FI33D4CHFSHT8KP.SQUARE.jpg http://cdn.instructables.com/FI3/3D4C/HFSHT8KP/FI33D4CHFSHT8KP.SMALL.jpg macobt I need night lamp for my room so I decide to make it from a old phone charger and 4 leds. First with screwdriver I open the charger and inside is circut board where is two wires that give 5 volts.I connect 2 leds in serial and add 2 more leds in parallel. All that I put inside the charger and glue i...
By: macobt

Continue Reading »]]>
Fri, 26 Apr 2013 13:23:54 PDT
How to Make empty wallet cash indicator http://www.instructables.com/id/How-to-Make-empty-wallet-cash-indicator/ http://cdn.instructables.com/F7G/ISK8/HFD1FMYM/F7GISK8HFD1FMYM.SQUARE2.jpg http://cdn.instructables.com/F7G/ISK8/HFD1FMYM/F7GISK8HFD1FMYM.SQUARE.jpg http://cdn.instructables.com/F7G/ISK8/HFD1FMYM/F7GISK8HFD1FMYM.SMALL.jpg macobt For makeing this led indicator for your wallet you will need one CR2016 lithium battery,one small magnet and led diode. How it works,when there is no money in wallet the led is on and mean to put cash in wallet,when cash is inside wallet the led is off,circuit is very simple but great :) Visit my bl...
By: macobt

Continue Reading »]]>
Thu, 18 Apr 2013 14:22:54 PDT
How to make wireless led light http://www.instructables.com/id/How-to-make-wireless-led-light/ http://cdn.instructables.com/FYV/YGRN/HFD1EXKR/FYVYGRNHFD1EXKR.SQUARE2.jpg http://cdn.instructables.com/FYV/YGRN/HFD1EXKR/FYVYGRNHFD1EXKR.SQUARE.jpg http://cdn.instructables.com/FYV/YGRN/HFD1EXKR/FYVYGRNHFD1EXKR.SMALL.jpg macobt You will need several components transistor BD139,47nf,470p,100n,15k resistor and some wire. Download schematic here:http://skory.gylcomp.hu/kapcs/ More videos:http://www.youtube.com/user/macobt More Projects:http://macoprojects.blogspot.com
By: macobt

Continue Reading »]]>
Sat, 13 Apr 2013 09:43:38 PDT
How to Install a Led Faucet http://www.instructables.com/id/How-to-Install-a-Led-Faucet/ http://cdn.instructables.com/FOK/FTG3/HFD1FS2A/FOKFTG3HFD1FS2A.SQUARE2.jpg http://cdn.instructables.com/FOK/FTG3/HFD1FS2A/FOKFTG3HFD1FS2A.SQUARE.jpg http://cdn.instructables.com/FOK/FTG3/HFD1FS2A/FOKFTG3HFD1FS2A.SMALL.jpg macobt I buy this led gadget at ebay for 2$ and easy install on faucet more videos https://www.youtube.com/user/macobt
By: macobt

Continue Reading »]]>
Sat, 13 Apr 2013 05:19:32 PDT
How to make Led ring light for camera http://www.instructables.com/id/How-to-make-Led-ring-light-for-camera/ http://cdn.instructables.com/FEA/4RGE/HF243XMV/FEA4RGEHF243XMV.SQUARE2.jpg http://cdn.instructables.com/FEA/4RGE/HF243XMV/FEA4RGEHF243XMV.SQUARE.jpg http://cdn.instructables.com/FEA/4RGE/HF243XMV/FEA4RGEHF243XMV.SMALL.jpg macobt Easy and fun way to make led ring light for your digital camera. Only you need is 8pcs white straw leds,white plastic board and female dc jack. Visit my blogspot:http://macoprojects.blogspot.com or visit my channel:https://www.youtube.com/user/macobt
By: macobt

Continue Reading »]]>
Sun, 7 Apr 2013 10:08:53 PDT
How to convert incandescent bulb to led http://www.instructables.com/id/How-to-convert-incandescent-bulb-to-led/ http://cdn.instructables.com/F4Z/8AYN/HF243UJK/F4Z8AYNHF243UJK.SQUARE2.jpg http://cdn.instructables.com/F4Z/8AYN/HF243UJK/F4Z8AYNHF243UJK.SQUARE.jpg http://cdn.instructables.com/F4Z/8AYN/HF243UJK/F4Z8AYNHF243UJK.SMALL.jpg macobt Converting  incandescent bulb to led,I have buy cheap 1$ bulb fixture,which works on battery and  I converted to work on 12 volts.Inside fixture I put white led strips. Visit my blog: http://macoprojects.blogspot.com/
By: macobt

Continue Reading »]]>
Sun, 7 Apr 2013 02:17:39 PDT
How to make led lamp to save dollars http://www.instructables.com/id/How-to-make-led-lamp-to-save-dollars/ http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SQUARE2.jpg http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SQUARE.jpg http://cdn.instructables.com/FJN/JCA9/HEXSSEA7/FJNJCA9HEXSSEA7.SMALL.jpg macobt Replace old incandescent bulb with leds,homemade led lamp made of 8 pieces 1 watt leds connected in serial array,one array have 5 leds,other have 3 leds.Total 8 watts of led light replace about 60 watts  incandescent light. Subscribe to my youtube channel:http://www.youtube.com/user/macobt Visit b...
By: macobt

Continue Reading »]]>
Tue, 2 Apr 2013 08:29:57 PDT
Hack iphone cable to make usb led lamp http://www.instructables.com/id/Hack-iphone-cable-to-make-usb-led-lamp/ http://cdn.instructables.com/F86/CBO1/HELXD2N0/F86CBO1HELXD2N0.SQUARE2.jpg http://cdn.instructables.com/F86/CBO1/HELXD2N0/F86CBO1HELXD2N0.SQUARE.jpg http://cdn.instructables.com/F86/CBO1/HELXD2N0/F86CBO1HELXD2N0.SMALL.jpg macobt Only you need to make this led bulb is old broken iphone or other cable,one white led and one resistor.
By: macobt

Continue Reading »]]>
Mon, 25 Mar 2013 12:05:51 PDT
Light Sensing Fairy Lights http://www.instructables.com/id/Light-Sensing-Fairy-Lights/ http://cdn.instructables.com/FZP/OMAR/HEBNHUMM/FZPOMARHEBNHUMM.SQUARE2.jpg http://cdn.instructables.com/FZP/OMAR/HEBNHUMM/FZPOMARHEBNHUMM.SQUARE.jpg http://cdn.instructables.com/FZP/OMAR/HEBNHUMM/FZPOMARHEBNHUMM.SMALL.jpg gfwilliams This is a set of lights that smoothly changes colour and pattern depending on the amount of light in the room. Apologies for the video - you'll need to view it in HD, and even then you may not be able top make out all of the code. You'll need: An STM32F4DISCOVERY board A USB-TTL converter...
By: gfwilliams

Continue Reading »]]>
Tue, 19 Mar 2013 15:19:56 PDT
Hakko Soldering Iron LED MOD http://www.instructables.com/id/Hakko-Soldering-Iron-LED-MOD/ http://cdn.instructables.com/FMM/M44Z/HDYZIRHO/FMMM44ZHDYZIRHO.SQUARE2.jpg http://cdn.instructables.com/FMM/M44Z/HDYZIRHO/FMMM44ZHDYZIRHO.SQUARE.jpg http://cdn.instructables.com/FMM/M44Z/HDYZIRHO/FMMM44ZHDYZIRHO.SMALL.jpg XOIIO This is a 10 minute mod I made to my soldering iron, I added a cap to make the LED fade out instead of just flash. Makes it a bit more esthetically pleasing.
By: XOIIO

Continue Reading »]]>
Sat, 9 Mar 2013 13:40:31 PST
RGB Ambient Reactive LED lights V2.0 http://www.instructables.com/id/RGB-Ambient-Reactive-LED-lights-V20/ http://cdn.instructables.com/FVO/Y567/HE07OVB7/FVOY567HE07OVB7.SQUARE2.jpg http://cdn.instructables.com/FVO/Y567/HE07OVB7/FVOY567HE07OVB7.SQUARE.jpg http://cdn.instructables.com/FVO/Y567/HE07OVB7/FVOY567HE07OVB7.SMALL.jpg mrworf Very very simple and cheap way to make good looking ambient RGB lights that reacts on video brightness and color. Schematic is very simple, NO microcontrollers. Enjoy! Schematics: http://imageshack.us/photo/my-images/546/20939579.jpg/ http://i56.tinypic.com/2s8k750.jpg http://www.imageupload.o...
By: mrworf

Continue Reading »]]>
Thu, 7 Mar 2013 12:24:55 PST
Amazing Leds http://www.instructables.com/id/Amazing-Leds/ http://cdn.instructables.com/F6G/MAER/HDRS6HBU/F6GMAERHDRS6HBU.SQUARE2.jpg http://cdn.instructables.com/F6G/MAER/HDRS6HBU/F6GMAERHDRS6HBU.SQUARE.jpg http://cdn.instructables.com/F6G/MAER/HDRS6HBU/F6GMAERHDRS6HBU.SMALL.jpg kevins82 So in this instructable you will see how to make usb led torch / lamp or something like that... :D All you need is 270ohm resistors and leds .... all steps u can see in video but if you have any questions dont keep them to youself! ask!
By: kevins82

Continue Reading »]]>
Tue, 5 Mar 2013 13:20:43 PST
Reed Switch Reverse Actuation http://www.instructables.com/id/Reed-Switch-Reverse-Actuation/ http://cdn.instructables.com/F99/SYED/HDOWAEVX/F99SYEDHDOWAEVX.SQUARE2.jpg http://cdn.instructables.com/F99/SYED/HDOWAEVX/F99SYEDHDOWAEVX.SQUARE.jpg http://cdn.instructables.com/F99/SYED/HDOWAEVX/F99SYEDHDOWAEVX.SMALL.jpg Kurt E. Clothier A reed switch is a device with two inner contacts that closes the connection between the contacts when a magnetic field is applied. This is similar to a standard momentary push button, except you apply a magnetic field to close the switch instead of pushing a button! Reed switches are very inexpens...
By: Kurt E. Clothier

Continue Reading »]]>
Sat, 2 Mar 2013 23:50:08 PST
Hoe to convert an ordinary 6 volt lantern into a powerful LED spot Light. http://www.instructables.com/id/Hoe-to-convert-an-ordinary-6-volt-lantern-into-a-p/ http://cdn.instructables.com/FAH/TPIL/HDG4H85N/FAHTPILHDG4H85N.SQUARE2.jpg http://cdn.instructables.com/FAH/TPIL/HDG4H85N/FAHTPILHDG4H85N.SQUARE.jpg http://cdn.instructables.com/FAH/TPIL/HDG4H85N/FAHTPILHDG4H85N.SMALL.jpg maxhuey This is my first, no idea how to do this correctly so please, be gentle... As you know there are probably thousands of these EVEREADY lanterns being thrown away because they are becoming obsolete. But a good quality LED spot light with very high brightness is is very expensive. You can do this modi...
By: maxhuey

Continue Reading »]]>
Thu, 21 Feb 2013 16:03:23 PST
Atari 2600 power switch LED http://www.instructables.com/id/Atari-2600-power-switch-LED/ http://cdn.instructables.com/FLI/BO3D/HD2RDN3Y/FLIBO3DHD2RDN3Y.SQUARE2.jpg http://cdn.instructables.com/FLI/BO3D/HD2RDN3Y/FLIBO3DHD2RDN3Y.SQUARE.jpg http://cdn.instructables.com/FLI/BO3D/HD2RDN3Y/FLIBO3DHD2RDN3Y.SMALL.jpg andrew mcneil I have always liked the Atari and it is now a true classic. But it never had a power on light. There are mods out there in Google land but all require you to drill into the case. I feel that drilling into the case of this classic would be a crime. So I set out to see if you could mount an LED into t...
By: andrew mcneil

Continue Reading »]]>
Tue, 12 Feb 2013 08:15:09 PST
Valentine Led Heart http://www.instructables.com/id/Valentine-Led-Heart/ http://cdn.instructables.com/FC3/IPKT/HCV9283P/FC3IPKTHCV9283P.SQUARE2.jpg http://cdn.instructables.com/FC3/IPKT/HCV9283P/FC3IPKTHCV9283P.SQUARE.jpg http://cdn.instructables.com/FC3/IPKT/HCV9283P/FC3IPKTHCV9283P.SMALL.jpg macobt Led heart made of hot melt plastic pipe, with leds and for blinking them i have use the chip NE555 circuit,on google there is lot of schematics for making led flasher,or just simple conect the leds to a two 1.5 volts battery:)
By: macobt

Continue Reading »]]>
Sat, 9 Feb 2013 10:48:47 PST
LED Music Cube 3x3x3 http://www.instructables.com/id/LED-Music-Cube-3x3x3/ http://cdn.instructables.com/FGA/CK08/HLPS532F/FGACK08HLPS532F.SQUARE2.jpg http://cdn.instructables.com/FGA/CK08/HLPS532F/FGACK08HLPS532F.SQUARE.jpg http://cdn.instructables.com/FGA/CK08/HLPS532F/FGACK08HLPS532F.SMALL.jpg gm93d LED Music Cube 3x3x3
By: gm93d

Continue Reading »]]>
Fri, 8 Feb 2013 05:37:44 PST