Instructables: question - offbeat http://www.instructables.com Thu, 2 Oct 2014 10:51:05 PDT BLOX v1.01 Any ideas for an "in mouth" voice mangler (NOT electronic)? http://www.instructables.com/answers/Any-ideas-for-an-in-mouth-voice-mangler-NOT-electr/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif max_allan I want to make scary inhuman sounds as part of a costume. So I can't hold things up to my face or use any electronics. Has anyone got any ideas? (Other than me ending up with a sore throat from screeching unnatural sounds.) I'm thinking of something like a whistle I can bite/hold with my lips and b...
By: max_allan

Continue Reading »]]>
Sun, 8 Sep 2013 06:48:39 PDT
Will There Be A HALLOWEEN Contest ? http://www.instructables.com/answers/Will-There-Be-A-HALLOWEEN-Contest-/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif iceng
By: iceng

Continue Reading »]]>
Mon, 26 Aug 2013 16:03:50 PDT
A third liquid that will not mix ? http://www.instructables.com/answers/A-third-liquid-that-will-not-mix-/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif rabarbarbaar! I've made an oil dropper/hourglass, i have used water and (olive)oil because they will not mix. is there a third liquid that i could add without it mixing with the oil or water ?
By: rabarbarbaar!

Continue Reading »]]>
Tue, 25 Sep 2012 06:03:44 PDT
when making some sort of "flame thrower" using an aerosol and lighting it, is there really such thing as suck back? http://www.instructables.com/answers/when-making-some-sort-of-flame-thrower-using-an-/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif jamob I dont see how flame would go through such a small opening, have air to fuel itself, build up pressure, and make it thick metl can explode. Even if it is possible itdoesnt seem easy. Cause axe cans and bugspray has some thick metal. Please respond
By: jamob

Continue Reading »]]>
Thu, 13 Sep 2012 09:52:15 PDT
Very nice propane spud gun with range of 150-200 yards for under 100$ should i post? http://www.instructables.com/answers/Very-nice-propane-spud-gun-with-range-of-150-200-y/ http://cdn.instructables.com/FZW/LPI1/H4I7VJPK/FZWLPI1H4I7VJPK.SQUARE2.jpg http://cdn.instructables.com/FZW/LPI1/H4I7VJPK/FZWLPI1H4I7VJPK.SQUARE.jpg http://cdn.instructables.com/FZW/LPI1/H4I7VJPK/FZWLPI1H4I7VJPK.SMALL.jpg knex luver234 So i spent the last few weeks designing and building a very nice powerful and yet simple propane spud gun. When i first realized i was going the cleaner burning more powerful propane way, i came to Instructables first. but after some hard looking i found nothing on these cannons, so i made my own pl...
By: knex luver234

Continue Reading »]]>
Fri, 13 Jul 2012 12:29:00 PDT
international entries? http://www.instructables.com/answers/international-entries/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif robot1398 Now international entries are not accepted so what if I only enter.If I win a prize i may not take the prize.Is it possible?and by what time would be international entries accepted .
By: robot1398

Continue Reading »]]>
Sun, 25 Mar 2012 21:22:09 PDT
Question about sprinkler valves? http://www.instructables.com/answers/Question-about-sprinkler-valves/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif General Eggs I'm planning on making a potato cannon, however I want to make it be able shoot multiple times with one tank. If I make the firing valve a pneumatically powered sprinkler valve, will it have to empty the entire air tank before it can close? Or can I just release the trigger and have the valve close ...
By: General Eggs

Continue Reading »]]>
Mon, 19 Mar 2012 15:18:48 PDT
How to make a Party Foam Cannon? http://www.instructables.com/answers/How-to-make-a-Party-Foam-Cannon/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif thatskindacool I am interested in building a party foam cannon, since they are quite expensive to purchase. Similar to: http://www.archiexpo.com/prod/universal-effects/foam-machines-59732-359838.html If anyone has any information on how to go about building one of these/what fan is used/mesh material used to cre...
By: thatskindacool

Continue Reading »]]>
Sun, 18 Mar 2012 18:39:25 PDT
Self loading confetti cannon http://www.instructables.com/answers/Self-loading-confetti-cannon/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif heathbar64 I'm dressing up a golf cart for parade duty. I thought the "exhuast stacks" should be used for confetti cannons. However I don't want to stop jump out and dump more confetti down the pipe in the middle of the show. Any Ideas?
By: heathbar64

Continue Reading »]]>
Thu, 23 Feb 2012 10:37:35 PST
Does anyone know when season four of the series 'Murdoch Mysteries' comes out on DVD for region one ? http://www.instructables.com/answers/Does-anyone-know-when-season-four-of-the-series-M/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif happi cat #71 I can't seem to find a definite answer anywhere.  I'm not sure where this fits in here, but I'm hoping someone might have something to pass along.  Thanks so much!  =^..^=  
By: happi cat #71

Continue Reading »]]>
Sat, 11 Feb 2012 22:11:39 PST
Giving away a free membership? http://www.instructables.com/answers/Giving-away-a-free-membership/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Josehf Murchison I have plenty of free membership I have claimed. I also have a 1 year free membership I have not claimed yet, how do I give away the one year free member ship.
By: Josehf Murchison

Continue Reading »]]>
Fri, 6 Jan 2012 07:14:19 PST
how can I get a good seal on a pvc air gun? http://www.instructables.com/answers/how-can-I-get-a-good-seal-on-a-pvc-air-gun/ http://cdn.instructables.com/FFK/Z542/GWTIJY0J/FFKZ542GWTIJY0J.SQUARE2.jpg http://cdn.instructables.com/FFK/Z542/GWTIJY0J/FFKZ542GWTIJY0J.SQUARE.jpg http://cdn.instructables.com/FFK/Z542/GWTIJY0J/FFKZ542GWTIJY0J.SMALL.jpg CaseBoy so I have been making pvc air guns and i have encountered a problem with my newest air gun. the seal between the pvc end cap and bike valve(witch is cut from bike inner tube and then hot glued in) is not the best seal. is there a way to get a guaranteed seal, with out breaking the bank. also best an...
By: CaseBoy

Continue Reading »]]>
Mon, 2 Jan 2012 15:26:13 PST
Can anyone identify this 20mm shell casing? http://www.instructables.com/answers/Can-anyone-identify-this-20mm-shell-casing/ http://cdn.instructables.com/FXQ/DEP8/GWSJMUWJ/FXQDEP8GWSJMUWJ.SQUARE2.jpg http://cdn.instructables.com/FXQ/DEP8/GWSJMUWJ/FXQDEP8GWSJMUWJ.SQUARE.jpg http://cdn.instructables.com/FXQ/DEP8/GWSJMUWJ/FXQDEP8GWSJMUWJ.SMALL.jpg ilpug My grandfather gave me this shell casing, and I have been having a hell of a time trying to find out what kind of gun it is from. On the bottom it says "20mm MK 4 I.S. 1944" From my browsing on the internet, I think it might possibly be a US naval autocannon round, possibly from a 20mm Oerlikon gu...
By: ilpug

Continue Reading »]]>
Fri, 30 Dec 2011 15:27:22 PST
Cthulu? http://www.instructables.com/answers/Cthulu/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif ilpug What do you think?
By: ilpug

Continue Reading »]]>
Wed, 7 Dec 2011 10:35:18 PST
Animatronic hand help! Is this the right tubing? http://www.instructables.com/answers/Animatronic-hand-help-Is-this-the-right-tubing/ http://cdn.instructables.com/FIH/OY3C/GUWHGIEA/FIHOY3CGUWHGIEA.SQUARE2.jpg http://cdn.instructables.com/FIH/OY3C/GUWHGIEA/FIHOY3CGUWHGIEA.SQUARE.jpg http://cdn.instructables.com/FIH/OY3C/GUWHGIEA/FIHOY3CGUWHGIEA.SMALL.jpg freeza36 The instructables member Tannatraad  made an instructable on how to make an animatronic hand. (http://www.instructables.com/id/Simple-Animatronics-robotic-hand/#step1) and it is made using the black wire encasing tubing found in cars. I bought some, but mine has a slit running down the whole side. T...
By: freeza36

Continue Reading »]]>
Sat, 12 Nov 2011 16:31:53 PST
How to determine the psi in a tank when it joins with a larger tank that's empty? http://www.instructables.com/answers/How-to-determine-air-pressure-distribution/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif General Eggs Ok, so I'm going to try to make this. However I want to make it so I can detach the big pvc reservoir and put on a new one for more than one shot. However, this is probably going to lower the psi when the air moves into the smaller reservoir.  One more question: my plan is to make the air tank just...
By: General Eggs

Continue Reading »]]>
Fri, 4 Nov 2011 12:00:30 PDT
How much would could a woodchuck chuck if a woodchuck could chuck wood? http://www.instructables.com/answers/How-much-would-could-a-woodchuck-chuck-if-a-woodch/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif STFU.! :DDDDDDDDDDDDDDDDD
By: STFU.!

Continue Reading »]]>
Sun, 23 Oct 2011 11:30:06 PDT
keep a papermodel in good condition? http://www.instructables.com/answers/keep-a-papermodel-in-good-condition/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif the poodleo I've just finished a paper model boat, it's a fishing boat with a lot of small detail, and especially rigging with thread. can anyone suggest any ways to keep it from getting broken/ and i don't mean, 'make sure you don't sit on it' or something, but maybe a spray on adhesive that would keep all the...
By: the poodleo

Continue Reading »]]>
Wed, 19 Oct 2011 19:58:51 PDT
how would you make a reusable exploding clothes? http://www.instructables.com/answers/how-would-you-make-a-reusable-exploding-clothes/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif lgese question for you all...For those of you who have seen 'Fist of the North Star' how would you make a reusable exploding clothes?  I got a friend wanting to go to Sakura Con in Seattle as Kenshiro from FotNS and no Kneshiro costume is complete without manly screaming felxing and his clothes.  any sugg...
By: lgese

Continue Reading »]]>
Sun, 16 Oct 2011 17:12:59 PDT
Are air cannons legal in California? http://www.instructables.com/answers/Are-air-cannons-legal-in-California/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Comhippy I'm wondering if air cannons (potato cannons powered by air) are legal in California. And if they are, then what would happen if you accidentally hit (but not break) a neighbors window?
By: Comhippy

Continue Reading »]]>
Sun, 9 Oct 2011 18:10:42 PDT
Powerful slingshot rubber that is very inexpensive and very easy to find? http://www.instructables.com/answers/Powerful-slingshot-rubber-that-is-very-inexpensive/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif bwells2 Somthing like Strong Rubber Bands
By: bwells2

Continue Reading »]]>
Sun, 25 Sep 2011 18:26:42 PDT
does any1 know where to get the colossal red dragon http://www.instructables.com/answers/does-any1-know-where-to-get-the-colossal-red-drago/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif mochashakakong i reallym want the colossal red dragon D&d mini i cant afford 150$+ on it its just a figure please help
By: mochashakakong

Continue Reading »]]>
Tue, 13 Sep 2011 12:55:39 PDT
where are you from? http://www.instructables.com/answers/where-are-you-from/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif amirhdami
By: amirhdami

Continue Reading »]]>
Sun, 21 Aug 2011 01:00:12 PDT
Y http://www.instructables.com/answers/Could-you-make-a-very-simple-crossbow-nothing-di/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif bwells2 W
By: bwells2

Continue Reading »]]>
Fri, 19 Aug 2011 13:18:47 PDT
Possible improved t-shirt cannon design. Will it work? http://www.instructables.com/answers/Possible-improved-t-shirt-cannon-design-Will-it-w/ http://cdn.instructables.com/FYU/3XCN/GR8H6RPG/FYU3XCNGR8H6RPG.SQUARE2.jpg http://cdn.instructables.com/FYU/3XCN/GR8H6RPG/FYU3XCNGR8H6RPG.SQUARE.jpg http://cdn.instructables.com/FYU/3XCN/GR8H6RPG/FYU3XCNGR8H6RPG.SMALL.jpg cowmanpoke I had an idea for a t-shirt cannon design using combustion instead of compressed air but desided against it when i found that it would most likely burn the shirt. I have since then changed the designs to one where I think I solved the problem but I would like some feedback before I start buying mate...
By: cowmanpoke

Continue Reading »]]>
Thu, 11 Aug 2011 20:04:42 PDT
Video special effects help. http://www.instructables.com/answers/Video-special-effects-help/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Laserman595 I have been poking around for a good video special effects/editing software. So far I have found a couple good looking programs such as Adobe's After Effects. But I. Would like to know if there is a better way to spend my money to get the cheap muzzle flashes and laser effects I am looking for. All ...
By: Laserman595

Continue Reading »]]>
Fri, 5 Aug 2011 16:58:48 PDT
does hydorchloric acid eat through wax? http://www.instructables.com/answers/does-hydorchloric-acid-eat-through-wax/ http://cdn.instructables.com/FJE/SX9N/GQX1VIW7/FJESX9NGQX1VIW7.SQUARE2.jpg http://cdn.instructables.com/FJE/SX9N/GQX1VIW7/FJESX9NGQX1VIW7.SQUARE.jpg http://cdn.instructables.com/FJE/SX9N/GQX1VIW7/FJESX9NGQX1VIW7.SMALL.jpg Thor007 I am trying to make naruto style headbands out of stainless steel and i want to know if hydrochloric acid will melt through wax so i can apply the hydrochloric acid specifically to where i want it. i am planning to use about 1/16 inch thick stainless and have the acid eat through about half of it. i...
By: Thor007

Continue Reading »]]>
Wed, 3 Aug 2011 19:21:43 PDT
Best nitro RC buggy for $150-300? http://www.instructables.com/answers/Best-nitro-RC-buggy-for-150-300/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif airsofter1 I'm looking to buy a nitro RC buggy but I am fairly new to the RC world. I am also open to truggies.
By: airsofter1

Continue Reading »]]>
Sun, 31 Jul 2011 18:08:34 PDT
How do you make potassium nitrate from the ground I have tried but I failed :( ? http://www.instructables.com/answers/How-do-you-make-potassium-nitrate-from-the-ground-/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif jbend
By: jbend

Continue Reading »]]>
Tue, 28 Jun 2011 19:36:44 PDT
mini cannon? http://www.instructables.com/answers/mini-cannon/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif copper tube mini cannon works with black powder. do its possible to make it works with other tips of powder (no black powder, no flash powder)
By: copper tube

Continue Reading »]]>
Sat, 25 Jun 2011 11:01:55 PDT
What is the origin of this 1988 Star Trek badge and sound board? http://www.instructables.com/answers/What-is-the-origin-of-this-1988-Star-Trek-badge-an/ http://cdn.instructables.com/F10/ZXGA/GOW498TM/F10ZXGAGOW498TM.SQUARE2.jpg http://cdn.instructables.com/F10/ZXGA/GOW498TM/F10ZXGAGOW498TM.SQUARE.jpg http://cdn.instructables.com/F10/ZXGA/GOW498TM/F10ZXGAGOW498TM.SMALL.jpg Data643 I bought a 1988 dated Star Trek Badge and sound board this weekend at a surplus / junk shop for $25. I have not been able to test the sound board yet (probably)due to dead batteries. I'm not sure what it's origin / significance is. I have some pictures posted above. Any info is appreciated. Data64...
By: Data643

Continue Reading »]]>
Sun, 19 Jun 2011 13:49:57 PDT
Can anyone post some links about how to make graffiti caps for spraycans? http://www.instructables.com/answers/Can-anyone-post-some-links-about-how-to-make-graff/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif ilpug I've been doing graffiti for a while now, but I have always had to struggle with a very tight budget. i usually use the stock tips that come with spray cans, but i have recently branched out and bought a bunch of different types of graffiti tips to try them out. i like the effects, but the caps are ...
By: ilpug

Continue Reading »]]>
Thu, 9 Jun 2011 10:15:16 PDT
sprinkler valve and blow gun valve? http://www.instructables.com/answers/air-gun-sprinkler-valve-and-blow-gun-valve/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif CaseBoy hello i am planing on making an air gun, but Im a little confused. my first question is that what is the best type of sprinkler valve to use (brand and size)? my barrel is 1/2" and air chamber is 1'. My second question is do they make a battery operated sprinkler valve, so i can just hook a electron...
By: CaseBoy

Continue Reading »]]>
Sun, 5 Jun 2011 11:32:27 PDT
make something using nothing but things found at the dollar store http://www.instructables.com/answers/make-something-using-nothing-but-things-found-at-t/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif andy55551  Making something using only things that can be bought in a dollar store. Is anyone up to the challenge?
By: andy55551

Continue Reading »]]>
Sat, 21 May 2011 07:38:41 PDT
piston valve? http://www.instructables.com/answers/piston-valve/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif copper tube What is a piston valve and where i can get it ?
By: copper tube

Continue Reading »]]>
Sat, 30 Apr 2011 04:51:21 PDT
Do you think it is possible to make a homemade kite big enough to be able to lift you of the ground.? http://www.instructables.com/answers/Do-you-think-it-is-possible-to-make-a-homemade-kit/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif amelaboy
By: amelaboy

Continue Reading »]]>
Fri, 29 Apr 2011 15:31:48 PDT
What should my next instructible be? http://www.instructables.com/answers/What-should-my-next-instructible-be/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Mr Cheeseo I am trying to decide between a drill-powered go-kart and a sampler based off of casette tapes.
By: Mr Cheeseo

Continue Reading »]]>
Tue, 26 Apr 2011 19:18:42 PDT
air canon? http://www.instructables.com/answers/air-canon/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif copper tube i don't no if it is legal to build a air canon in canada. thanks to answer me
By: copper tube

Continue Reading »]]>
Thu, 21 Apr 2011 08:41:05 PDT
How do I make a good monocular or a good headset.? http://www.instructables.com/answers/How-do-I-make-a-good-monocular-or-a-good-headset/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif bendog38 Okay. I have a Casio Exilm, safety glasses, a broken small flashlight, duct tape and broken head phones (over ear style).  Oh yeah, and I have run out of my own ideas.  Actually, I ran out of ideas 2.5 weeks ago.
By: bendog38

Continue Reading »]]>
Fri, 15 Apr 2011 20:16:24 PDT
Will this launcher design work? http://www.instructables.com/answers/Will-this-launcher-design-work/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif ishmal1103 Concept - A hybrid-launcher (combustion and pneumatics) with interchangeable barrels for various projectile types So the design is pretty simple, in the back of the gun launcher thing (we’ll call it ‘the weapon’ for now) will be a propellant chamber measuring 2.5” wide and 1.5’ long. On one end ...
By: ishmal1103

Continue Reading »]]>
Wed, 13 Apr 2011 13:32:10 PDT
how to log someone off on a macbook? http://www.instructables.com/answers/how-to-log-someone-off-on-a-macbook/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif daniel123456789 im at school and i want to know how to log someone off
By: daniel123456789

Continue Reading »]]>
Mon, 11 Apr 2011 21:04:31 PDT
Are there any instructables on a mini mischief kit? http://www.instructables.com/answers/Are-there-any-instructables-on-a-mini-mischief-kit/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif rockgod57 i am big on mischief and pranks and weapons so i wanted to know if there is a way you can make an altoids mischief kit full of weapons and pranks.
By: rockgod57

Continue Reading »]]>
Sat, 26 Feb 2011 14:29:49 PST
I have 500 business cards, and i was wondering if you (yes, YOU) had any cool ideas of what i can do with them?? http://www.instructables.com/answers/I-have-500-business-cards-and-i-was-wondering-if-/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif KottonKandy I was sitting here, staring at these babies, when i go " I betcha someone on Instructables has a good idea or two"...so. yea, One thing led to another, and here i am, asking you( yes YOU) what to do.  Here is what you may (or may not) need to know... They have someone else's name on them. And adre...
By: KottonKandy

Continue Reading »]]>
Sat, 22 Jan 2011 14:09:06 PST
Egg project ideas? http://www.instructables.com/answers/Egg-project-ideas/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif micha3l87 Hey guys my sister has asked me for some help with a project. She has to have a egg travel 3 meters using wind power. The vehicle has to be small and have 4 wheels. and made of recyclable material. When i heard of this project i immediately thought of instructables. I was thinking of a Styrofoam b...
By: micha3l87

Continue Reading »]]>
Sun, 16 Jan 2011 14:39:52 PST
FREE PATCH TO WHOEVER HAS THE BEST IDEA for a moving, pivoting, 360*, rotating air rifle bipod/stand? http://www.instructables.com/answers/FREE-PATCH-TO-WHOEVER-HAS-THE-BEST-IDEA-for-a-mov/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif ostomesto I have recently built an air rifle (for the ible' it's called The NAR-V1) and it's awesome but there is one problem. Its pretty lengthy and heavy with or without the brarel attached and I'm a small kid. I mean SHORT only about 4'5". And it's almost impossible to hold and I dont want to have to make ...
By: ostomesto

Continue Reading »]]>
Thu, 13 Jan 2011 12:33:28 PST
Snow in a box? http://www.instructables.com/answers/Snow-in-a-box/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif borisbatenov I'm trying to figure out a way to make snow in a box. I want the person opening the box to be surprised at fake snow shooting into the air after opening it. Any help is appreciated.Sn
By: borisbatenov

Continue Reading »]]>
Sat, 11 Dec 2010 23:36:54 PST
trying to rember a movie i saw? http://www.instructables.com/answers/trying-to-rember-a-movie-i-saw/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif knexsuperbuilderfreak i rember seeing this movie with my cousin i have no idea what the name is. all i remebr is that it takes place at a store kind of like sams club and they had the fastest chasier there but he was giving people free items
By: knexsuperbuilderfreak

Continue Reading »]]>
Tue, 7 Dec 2010 13:51:19 PST
What is a good gun, bow and arrow, or crossbow i can make without glue or tools (excluding knife as a tool)? http://www.instructables.com/answers/What-is-a-good-gun-bow-and-arrow-or-crossbow-i-c/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif the king of spades Says it in the title. Give me links or your own instructable if you have a suggestion.
By: the king of spades

Continue Reading »]]>
Sun, 21 Nov 2010 07:27:28 PST
I want to make some steampunk goggles but can someone help me figure out what these are? http://www.instructables.com/answers/I-want-to-make-some-steampunk-goggles-but-can-some/ http://www.instructables.com/static/defaultIMG/default.SQUARE2.png http://www.instructables.com/static/defaultIMG/default.SQUARE.png http://www.instructables.com/static/defaultIMG/default.SMALL.gif Iridium7 I want to make some goggle but for the straps I need some kind of metal ring. Like these But I would rather get them locally. can someone please help?
By: Iridium7

Continue Reading »]]>
Thu, 21 Oct 2010 14:11:33 PDT
How would you make a dancing hula doll? http://www.instructables.com/answers/How-would-you-make-a-dancing-hula-doll/ http://cdn.instructables.com/FDS/X62O/GDNIUIQP/FDSX62OGDNIUIQP.SQUARE2.jpg http://cdn.instructables.com/FDS/X62O/GDNIUIQP/FDSX62OGDNIUIQP.SQUARE.jpg http://cdn.instructables.com/FDS/X62O/GDNIUIQP/FDSX62OGDNIUIQP.SMALL.jpg miabia I want to make a set of dancing hula dolls for each of the people in my polynesian dance group.  Might scavenge the torsos/legs of used dolls in a used shop, but don't know how they make the shaking hips.  Actually, I've never seen one in real life, so no chance to look under the grass skirt, lol. ...
By: miabia

Continue Reading »]]>
Fri, 3 Sep 2010 16:41:24 PDT